CADPower

CADPower Tool List

Polyline Tools
Join CP_3DJ CP_PLJOIN Change 2d -> 3d -> 2d CP_CH2D3D CP_CH3D2D Vertex Management CP_DELVX CP_INSVX CP_DENSIFY CP_REM_LINVERTS CP_PL_PLACE CP_FIXCLOSED CP_DELSVP CP_MVEDIT CP_NEWSTART Part Editing CP_PARTEXTRACT CP_PARTCOPY CP_PARTOFFSET CP_PARTSTRETCH CP_PARTMIRROR CP_PARTROTATE CP_PARTRESHAPE Inquiry & Statistics CP_PL_STAT CP_LAYERAREA CP_LENGTH CP_CALCAREA CP_BULGE Join 3D Polylines Automated Join - 2D polylines

2D-to-3D 3D-to-2D

Delete Vertex Insert Vertex Densify vertices Weed (remove) collinear vertices from polyline Place Points/Blocks along vertices Add / Remove redundant closing vertex in polylines Delete single vertex polylines Multiple Vertex Editor Specify a new start point for closed polylines

Extract part of a polyline Copy(and move) part of a polyline Offset part of a polyline Stretch part of a polyline Mirror part of a polyline Rotate part of a polyline Reshape part of a polyline

Compute detailed polyline statistics Compute summed polyline areas from selected layers Compute lengths Compute summed areas of closed polylines Display info. about polyline bulge (arc segments)

More editing CP_XV CP_CP_MPEDIT CP_CHW CP_XP_WPL CP_SEGLENSET Flip CP_FLIP CP_PLARCMIRROR Fillet CP_FILLETPOLY CP_MFILLET Others CP_CP_INOUTOFFSET CP_XPSPL CP_POLYGETZ CP_FLOW_LT CP_ZPOLY CP_FIXUCS CP_LINPOLY

Express Pedit Multiple Pedit Change Widths Explode Polylines with width Specify segment lengths in polylines

Flip (Reverse) direction Flip (mirror) arc segments of polylines

Enhanced fillet command Fillet multiple polylines

Offset closed polylines INwards/OUTwards Explode Splined Acquire Neighboring polyline elevations Control polyline linetypes Zoom to Polyline Fix line/polylines with different UCS Draw linear polylines from arced polylines

Conversion
Line/Polyline/Arc/Spline CP_PLARC2PL CP_PLINE2ARC CP_LINE2PL CP_SPL2PL CP_PL2SPL Polyline/3DFace/Mesh CP_PL23DFACE CP_PL2PFACE CP_3DF2PL CP_3DF2PFACE CP_PFACE2PL More conversion CP_BLKSHP2P CP_P2BLKSHP CP_0LEN2PNT CP_ATT2XD Polyline Types CP_CH_H2L CP_CH_L2H CP_SCALE_Z Convert Arc Polylines to linear segment polyline Convert linear polylines to arcs/arced polylines Convert lines and arcs to polylines Convert Splines to polylines Convert polylines to SPLINE

Convert polylines to 3dface Convert polylines to PFACE 3DFaces to polylines 3DFaces to polyface mesh Polyface mesh to polylines

Convert Blocks/Shapes/Text/Circle to Points Convert Points/Text/Circles to Blocks/Shapes Convert 0 Lengths to POINTs Attributes to Xdata

Heavy-Weight to Light-Weight Light-Weight to Heavy-Weight Scale Z values

CP_BL2BE CP_FLATTEN

Change Properties ByLayer-to-ByEntity Flatten - Convert to 0.0 elevation

Export
CP_IMPEX CP_MULTEXPORT CP_3DF2DM CP_IMPORT2DM Import/Export points and lines Multiple drawing export in various formats Export 3dface objects into SMS 2DM file format Import 2DM files as 3dface objects

Draw
Geometry CP_CREATETAPER CP_SLOT CP_HELIX CP_PARABOLA CP_INVOLUTE CP_TUBE CP_TRUNCCONE CP_PERP CP_DBOX CP_XLINES CP_TANCURVE CAD Objects CP_EASY3DPOINT CP_EASY3DPOLY CP_EASY3DFACE Symbology CP_ROUGHEN Rule-based CP_DRAWPOLYINCDEC CP_BOXSCREEN CP_BOUNDENT CP_SORTEDPOLY CP_SHOWPLARCS Tapered lines Slot Helix Parabola Involute Tube Truncated Cone Perpendicular lines Draw Rectangle with diagonals Projected(construction) lines Tangents to Curves

Easy 3dpoint Easy 3dpolyline Easy 3dface

Roughen a Line

Draw 3d polylines with auto.Elev increment/decrement Draw a rectangle box at the current screen extents Draw bounding box around selected object(s) Draw a polyline by joining points in sorted order Draw arc-ends to arc-center connections in arcs & polyarcs

Build
Offset CP_MOFFSETR CP_MOFFSETA CP_CP_OFFSET CP_3DOFFSET CP_SEGOFFSET CP_MVOFFSET CP_CREATECENT Multiple Offset - Relative Multiple Offset - Absolute Offset and delete original Offset 3d polylines Offset single segment from polyline Multiple Variable polyline segment offset Create centroid marks inside closed polygons

CP_MEASUREMANY CP_EXTRUDER CP_JNE CP_CPROT CP_MVROT

Measure multiple objects Easy Solids Extruder Join nearest ends of lines, polylines Copy and then Rotate Move and then Rotate

Annotation
CP_IDXYZ CP_VXLABEL CP_SEGLABEL CP_ANGLABEL CP_ANNOTATEENDS CP_ANNOTPOINT S CP_LENTEXT CP_HNDLABEL Label points Label polyline vertices Label polyline segments Label polyline Angles Annotate ends of lines/polylines with symbols Annotate points, based on layer names Create/update length annotation Display object handles as text labels

Blocks
Block-related CP_MOD_SHBL CP_REPBLK CP_XP_ATT CP_COMPAREBLKATTS CP_CONNECTBLOCKS CP_MREDEFINE CP_EXPLODENESTED CP_EXPLODE2LAYER CP_DRAWSEGBLOCKS CP_MBLKTRIM CP_BLOCKINS CP_REPEATBLK Attribute-related CP_CP_ATTEDIT CP_CP_EASYATT CP_CP_EASYATT_SETUP CP_CP_EASYATTCLASS CP_CP_ATTEXT CP_PROP2ATT CP_TAGEXT CP_TAGREN CP_TAGDEL CP_ATTMOVE CP_ATTROTATE CP_ATTUPRIGHT CP_ATTXFER CP_TXT2ATT

Globally Modify Block Properties Replace Block Explode Block- Retain attributes as Text Compare Block attributes and create report Connect blocks based on attribute values Multiple Redefine Blocks-Lyr/Clr Explode only nested blocks Explode blocks to a specified layer Place a block along each segment of the polyline Trim lines/polylines along intersecting blocks Express Block Insert Repeat Last Block Insert

Global Attribute Editor Multiple-Choice attribute editor Multiple-Choice attribute editor Setup Change block layers/color based on attribute values Extract Block attributes to file Transfer AutoCAD properties to Blocks Attributes Export Block Attribute Tags to ASCII file Rename block attribute tags, prompts and defaults Delete block attribute tags from block definition Move attribute Rotate attribute Make attribute readable Transfer Attributes between blocks Transfer Text strings to Block attributes

CP_ZOOMTXT CP_BLKEDIT CP_DYNATTPLACE CP_SRCHBLK4TXT

Search and replace text/attributes Edit blocks graphics and attribute properties independently Place Block - position attributes interactively Search Blocks for text strings

Text
Creation CP_TC CP_CURVETEXT CP_EASYTEXT CP_DATESTAMP CP_MT Editing CP_MODTXT CP_TXTFILTER CP_TXTROUND CP_ENCLOSE CP_CONS_TXT CP_SPLITTEXT CP_UNCLUTTER CP_TXTSLIDE CP_TXT2FILE CP_TXTEDIT Conversion CP_TXT2ATTDEF CP_ATTDEF2TXT CP_CHCASE Display CP_ALIGNTEXT CP_ALIGNTEXT2LINE CP_TORIENT CP_UND_LINE CP_TXTEVAL CP_DWGFONTS Draw Quick Text (running numbers) Create text along a curve Create text aligned to a curve Create Date/Drawing Stamp Draw Multiple Text

Globally modify TEXT/MTEXT Text Filter Round Off Numeric text Enclose Text in Box Consolidate Text into MText Split long text strings into individual strings Unclutter text objects Slide (move) text relative to its rotation angle Write Text to File Global Multiple Text Editor

Convert text strings to attribute definitions Convert attribute definitions to text objects Change Case

Align Text Objects Align Text Objects to a line Text Orient: Make Text,MText readable Underline Text Apply arithmetic/statistical operations on text objects List Drawing Fonts

Extended Entity Data

CP_REMXD CP_XD_SEARCH CP_SHOWXD CP_XD_EXTRACT CP_OD_XD_LABEL CP_NODATA CP_EASYEED Remove Xdata Search and replace extended entity data Display extended entity data from picked object Extract extended entity data to ASCII files Create text labels from Object data / extended entity data Check for no Xdata / Object Data Edit XDATA in a dialog box

Miscellaneous
File Management CP_FILEMAN File Manager

CP_DWGBROWSER CP_BINDXREF CP_BATCHPROCESS CP_MULTINS CP_MXREF Export CP_LYRS2DWG CP_DWGSPLIT CP_FILEESORT CAD Procedures CP_MATCH CP_OBJALIGN CP_XYZSCL CP_MEANPOINT CP_FLIPZ CP_ROUNDOFF CP_HATCHBOUND CP_XTRACT CP_XP_RETDAT CP_HATCHAREA CP_FLIPARCS CP_CHOP CP_AUTODIM CP_FACENORMAL CP_CONTBREAK CP_ZOOMENT CP_DELETELAYOUTS CP_NULLTEXT CP_PURGEALL CP_SCALECLEAN CP_VISIBLE

DWG browser, with thumbnail previews Detaches all un-referenced XREFs and binds all others into current DWG Batch process multiple drawings with scripts Multiple DWG Inserts Multiple drawings XREF

Layers to DWG Split a drawing into smaller parts Sort ASCII files

Match Properties Align Objects Scale objects (unequally) in X, Y and Z directions Create a mean (averaged) point from a cluster of points Flip (reverse) elevations(Z) from selected objects Round Off Values from points/lines Re-Create Hatch boundaries from HATCH object Extract from XREF Explode objects - Retain Object Table and extended entity data Report on areas covered by HATCH objects Flip ECS of arcs with negative normals Object Chopper Automatic Dimensioning Control 3dface Face Normals Break(Split) objects along a polyline Zoom to extent of selected object(s) (with 5% margin) Delete paper-space layouts Delete Null TEXT Purge All Unused Symbols Remove all unreferenced scales Change object visibility

Selection
CP_PLFILTER CP_FINDENCLOSED CP_3DFFILTER CP_ESELECT CP_MAKESEL CP_FINDZRNG CP_SL CP_SS CP_LASTSEL Polylines based on properties Find points enclosed within 3dface space 3DFaces based on properties Enhanced Entity Selector Build Selection Set Find objects in selected Z range Select Current Layer Select Current Style Put last CADPower selection in 'previous' sel.set

Inquiry
CP_SURFAREA CP_ANGLE CP_CGRAV CP_DWG_STAT Compute Surface Area of 3DFACEs Display angle between two lines Compute Center of Gravity Display Drawing Statistics

CP_PERIMTR CP_VISIT CP_Q CP_DXY

Compute running distance/perimeter Object Selection Browser Quick elevation Info Enhanced DIST command

Layer
CP_LAYERMAN CP_ISOD CP_RESTORE CP_SL_1 CP_SL_2 CP_SL_3 CP_RL_1 CP_RL_2 CP_RL_3 CP_CCL CP_CPCL CP_COPYLYR Layer Names Editor Isolate layer(s) Restore Isolated layer(s) Save Layer State - 1 Save Layer State - 2 Save Layer State - 3 Restore Layer State - 1 Restore Layer State - 2 Restore Layer State - 3 Change to current layer Copy to current layer Copy layer contents to another layer