Engine Test Bed: Solteq

SOLTEQ
Equipment for Engineering Education & Research
ENGINE TEST BED

MODEL: TH 03
HIS Engine Test Bed (Model: TH 03) is a self-contained compact unit designed for easy installation and bench mounting. An eddy current dynamometer is used to load the engine. The dynamometer is provided with a manual control of the load. The test set is supplied with, as standard, a Robin engine which is a single cylinder, four-stroke, spark ignited, air-cooled, side valve type of engine. This is a typical small engine commonly used in various industrial and domestic applications throughout the world.
The engine and dynamometer are carried on a solid steel base plate resiliently mounted within a steel framework. Included within the framework are the fuel system, which incorporates a fuel tanks and valves, and the air induction system. The instrumentation and control panel are mounted on the front frame.
An additional engines, four-stroke diesel engine is supplied and easily interchangeable with the standard engine to enable characteristics comparisons. This alternative engine is air-cooled single cylinder engine.
SOLTEQ
FEATURES i) Self contained, compact and easily installed bench mounted unit
Wheel Stand:
Fabricated steel stand designed specifically to mount the test set comes with additional engines. Engines:
ii) Single cylinder air-cooled and interchange-able engines: a) four stroke gasoline engine (169 cc) b) four stroke diesel engine (219 cc) iii) Eddy Current Dynamometer and Controller iv) Fully instrumented for air and fuel flow, temperatures, speed and power
Two different types of engine are supplied with the test set. a) Four Stroke Petrol Engine
EXPERIMENTAL CAPABILITIES Engine performance curve at full and partial load. Engine efficiency and fuel consumption variation with speed and load. Determination of the following engine parameters at different speed: - Engine torque - Engine power - Volumetric fuel consumption - Specific fuel consumption - Air flow rate - Air-to-fuel ratio - Volumetric efficiency - Brake mean effective pressure (bmep) SPECIFICATIONS A self-contained compact designed engine test bed constructed on a solid steel base plate resiliently mounted within a steel framework. Two types of engine are supplied complete with a Eddy Current
Robin EX17D air-cooled, single cylinder, spark ignited. Displacement, cc : 169 Output, kW (hp) : 4.2 (5.63) @ 4,000 rpm. Max. torque (Nm) : 11.3 / 2500 rpm b) Four Stroke Diesel Engine
Yanmar L48 single cylinder with compression ignition. Displacement, cc : 219 Output, kW (hp) : 3.1 (4.15) @ 3,000 rpm. Bore x stroke, mm : 70.0 x 55 Eddy Current Dynamometer: Relative humidity : 20 - 90% PH Measuring accuracy of torque : +/- 0.2 - 0.3% FS Measuring accuracy of rotational speed : +/- 1 r/min
Instrumentation and Control: The control panel is made of epoxy coated mild steel for mounting the instrumentation and it carries full operating instructions together with details of the test procedures.
The controls include a manual engine throttle and adjustment of the excitation applied to the Eddy Current Dynamometer which act together to provide complete and efficient control of the engine speed and load.
SOLTEQ
An optional PV Diagram system is also available to visually demonstate the PV Diagram.
Dynamometer and fuel system, which incorporates a fuel tank.
SOLTEQ
a) Engine speed b) Engine Torque c) Air-flow measurement
Instrumentations for the followings are included:
d) Fuel flow measurement using electronic balance e) Multipoint temperature indication by thermocouples for: air inlet temperature fuel temperature lubricating oil temperature exhaust temperature Engine power and torque may be easily determined from the dynamometer controller. OPTIONAL ITEMS - PV PV DIAGRAM i) 1 unit of crank shaft transmitter ii) 1 unit of charged pressure transmitters (applicable for one engine only) iii) 1 unit of oscilloscope
i) ii) iii) iv)
A PC with latest Pentium Processor An electronic signal conditioning system Stand alone data acquisition modules Windows based software Data Logging Signal Analysis Process Control Real-Time Display Tabulated Results Graph of Experimental Results
- CAL SOLCAL COMPUTER AIDED LEARNING SOFTWARE i) ii) iii) iv) Interactive multimedia features Graphical simulation Experiment results samples Full experiment manuals
REQUIREMENTS
a)Electrical supply : 220-240VAC/50/2A. Since all the power is dissipated as heat to the surroundings, adequate ventilation must be provided. b)Engine exhaust outlet.
- EI DIGITAL INSTRUMENTATIONS i) ii) iii) iv) v) vi) 5 units of digital indicator 4 units of temperature sensor c/w transmitters 1 unit of electronic balance 1 unit of electronic air flowmeter 1 unit of speed sensor 1 unit of torque sensor
OVERALL DIMENSIONS Height Width Depth : 1.60 m : 1.50 m : 1.00 m
SOLTEQ
-DAS SOLDAS DATA ACQUISITION SYSTEM
SOLTEQ
SOFTWARE & E - LEARNING Our range of teaching equipment can be complemented with our SOLDAS and SOLCAL software.
SOLDAS - Supervisory Control & Data Acquisition - Data Logging - Signal Analysis - Process Control - Real-Time Display - Tabulated Results - Graph of Experimental Results
SOLCAL - Computer Aided Learning - Multimedia Features - Interactive - Graphic Simulation - Experiment Result Samples - Full Experiment Manuals
Contact us for a catalog CD SOLUTION ENGINEERING SDN. BHD.

(Co. No. 174876-M) Sales Office : No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara, 47100 Puchong, Selangor Darul Ehsan, Malaysia. Tel. No. : +(603) 80758000 Fax. No.: +(603) 80755784 R&D Office : G-2A, Incubator 3, Technology Park Malaysia, Bukit Jalil, 57000 Kuala Lumpur, Malaysia. Tel. No. : +(603) 8996 0023 Email : [email protected] Web site : http//www.solution.com.my/ MSC- Status
BUATAN MALAYSIA
AGENT:
Company

Engine Test Bed: Solteq

Uploaded by

Copyright:

Available Formats

Engine Test Bed: Solteq

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Engine Test Bed: Solteq

Uploaded by

Copyright:

Available Formats

SOLTEQ

Equipment for Engineering Education & Research

ENGINE TEST BED

Equipment for Engineering Education & Research

An optional PV Diagram system is also available to visually demonstate the PV Diagram.

Dynamometer and fuel system, which incorporates a fuel tank.

Equipment for Engineering Education & Research

Instrumentations for the followings are included:

i) ii) iii) iv)

OVERALL DIMENSIONS Height Width Depth : 1.60 m : 1.50 m : 1.00 m

-DAS SOLDAS DATA ACQUISITION SYSTEM

Equipment for Engineering Education & Research

Contact us for a catalog CD SOLUTION ENGINEERING SDN. BHD.

You might also like