Scribd
Upload
98 views4 pages

Quad 2-Input Nor Buffer SN54/74LS28: Low Power Schottky

This document provides information on the SN54/74LS28 quad 2-input NOR buffer integrated circuit. It includes specifications on the device packaging, ordering information, electrical characteristics, and application notes. The device comes in ceramic, plastic, and SOIC packages and operates as a quad 2-input NOR logic gate with typical propagation delays of 12 nanoseconds.

Uploaded by

Wim Wim Yuniarto
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views4 pages

Quad 2-Input Nor Buffer SN54/74LS28: Low Power Schottky

This document provides information on the SN54/74LS28 quad 2-input NOR buffer integrated circuit. It includes specifications on the device packaging, ordering information, electrical characteristics, and application notes. The device comes in ceramic, plastic, and SOIC packages and operates as a quad 2-input NOR logic gate with typical propagation delays of 12 nanoseconds.

Uploaded by

Wim Wim Yuniarto
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SN54/74LS28 QUAD 2-INPUT NOR BUFFER

QUAD 2-INPUT NOR BUFFER


VCC 14 13 12 11 10 9 8

LOW POWER SCHOTTKY

7 GND
14 1

J SUFFIX CERAMIC CASE 632-08

14 1

N SUFFIX PLASTIC CASE 646-06

14 1

D SUFFIX SOIC CASE 751A-02

ORDERING INFORMATION
SN54LSXXJ SN74LSXXN SN74LSXXD Ceramic Plastic SOIC

GUARANTEED OPERATING RANGES


Symbol VCC TA IOH IOL Supply Voltage Operating Ambient Temperature Range Output Current High Output Current Low Parameter 54 74 54 74 54, 74 54 74 Min 4.5 4.75 55 0 Typ 5.0 5.0 25 25 Max 5.5 5.25 125 70 1.2 12 24 Unit V C mA mA

FAST AND LS TTL DATA 5-75

SN54/74LS28
DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)
Limits Symbol VIH VIL VIK VOH Parameter Input HIGH Voltage 54 Input LOW Voltage 74 Input Clamp Diode Voltage 54 Output HIGH Voltage 74 54, 74 VOL Output LOW Voltage 74 Input HIGH Current 0.1 Input LOW Current Short Circuit Current (Note 1) Power Supply Current Total, Output HIGH Total, Output LOW
Note 1: Not more than one output should be shorted at a time, nor for more than 1 second.

Min 2.0

Typ

Max

Unit V

Test Conditions Guaranteed Input HIGH Voltage for All Inputs Guaranteed Input LOW Voltage for All Inputs VCC = MIN, IIN = 18 mA VCC = MIN, IOH = MAX, VIN = VIH or VIL per Truth Table IOL = 12 mA IOL = 24 mA VCC = VCC MIN, VIN = VIL or VIH per Truth Table

0.7 V 0.8 0.65 2.5 2.7 3.5 3.5 0.25 0.35 0.4 0.5 20 1.5 V V V V V A mA mA mA

IIH IIL IOS ICC

VCC = MAX, VIN = 2.7 V VCC = MAX, VIN = 7.0 V VCC = MAX, VIN = 0.4 V VCC = MAX VCC = MAX

0.4 30 130 3.6 13.8

mA

AC CHARACTERISTICS (TA = 25C)


Limits Symbol tPLH tPHL Parameter Propagation Delay Propagation Delay Min Typ 12 12 Max 24 24 Unit ns ns Test Conditions VCC = 5.0 V CL = 45 pF, RL = 667

FAST AND LS TTL DATA 5-76

Case 751A-02 D Suffix 14-Pin Plastic SO-14 -A14 8

NOTES: 1. DIMENSIONS A" AND B" ARE DATUMS AND T" IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. 4. CONTROLLING DIMENSION: MILLIMETER. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 6. 751A01 IS OBSOLETE, NEW STANDARD 751A02.

-B1 7

P
7 PL

0.25 (0.010)

C
SEATING PLANE

R X 45

D 14 PL
0.25 (0.010)
M

K
T B
S

DIM A B C D F G J K M P R

MILLIMETERS MIN MAX


8.55 3.80 1.35 0.35 0.40 8.75 4.00 1.75 0.49 1.25

INCHES MIN MAX


0.337 0.150 0.054 0.014 0.016 0.344 0.157 0.068 0.019 0.049

1.27 BSC 0.19 0.10 0 5.80 0.25 0.25 0.25 7 6.20 0.50

0.050 BSC 0.008 0.004 0 0.229 0.010 0.009 0.009 7 0.244 0.019

Case 632-08 J Suffix 14-Pin Ceramic Dual In-Line -A14 8


NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH.

-B1 7

3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIM F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. 5. 63201 THRU 07 OBSOLETE, NEW STANDARD

63208.

-TSEATING PLANE

K F D 14 PL
0.25 (0.010)
M

G
T A
S

N J 14 PL

0.25 (0.010)

DIM A B C D F G J K L M N

MILLIMETERS MIN MAX


19.05 6.23 3.94 0.39 1.40 19.94 7.11 5.08 0.50 1.65

INCHES MIN MAX


0.750 0.245 0.155 0.015 0.055 0.785 0.280 0.200 0.020 0.065

2.54 BSC 0.21 3.18 0.38 4.31

0.100 BSC 0.008 0.125 0.015 0.170

7.62 BSC 0 0.51

15 1.01

0.300 BSC 0 0.020

15 0.040

Case 646-06 N Suffix 14-Pin Plastic


NOTES: 1. LEADS WITHIN 0.13 mm (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION.

14

B
1 7

2.

DIMENSION L" TO CENTER OF LEADS WHEN FORMED PARALLEL.

3.

DIMENSION B" DOES NOT INCLUDE MOLD FLASH.

4. 5.

ROUNDED CORNERS OPTIONAL. 64605 OBSOLETE, NEW STANDARD 64606.

A F C N H G D
SEATING PLANE

NOTE 4

J K M

DIM A B C D F G H J K L M N

MILLIMETERS MIN MAX


18.16 6.10 3.69 0.38 1.02 19.56 6.60 4.69 0.53 1.78

INCHES MIN MAX


0.715 0.240 0.145 0.015 0.040 0.770 0.260 0.185 0.021 0.070

2.54 BSC 1.32 0.20 2.92 2.41 0.38 3.43

0.100 BSC 0.052 0.008 0.115 0.095 0.015 0.135

7.62 BSC 0

10

0.300 BSC 0

10

0.39

1.01

0.015

0.039

FAST AND LS TTL DATA 5-77

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.

FAST AND LS TTL DATA 5-78

You might also like