ULN2004AC-inversor Lvadora

ULN2001A-ULN2002A ULN2003A-ULN2004A
SEVEN DARLINGTON ARRAYS
. . . . . . .
SEVEN DARLINGTONS PER PACKAGE OUTPUT CURRENT 500mA PER DRIVER (600mA PEAK) OUTPUT VOLTAGE 50V INTEGRATED SUPPRESSION DIODES FOR INDUCTIVE LOADS OUTPUTS CAN BE PARALLELED FOR HIGHER CURRENT TTL/CMOS/PMOS/DTL COMPATIBLE INPUTS INPUTS PINNED OPPOSITE OUTPUTS TO SIMPLIFY LAYOUT
DIP16 ORDERING NUMBERS: ULN2001A/2A/3A/4A
SO16
DESCRIPTION The ULN2001A, ULN2002A, ULN2003 and ULN2004A are high voltage, high current darlington arrays each containing seven open collector darlington pairs with common emitters. Each channel rated at 500mA and can withstand peak currents of 600mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The four versions interface to all common logic families :
ULN2001A ULN2002A ULN2003A ULN2004A General Purpose, DTL, TTL, PMOS, CMOS 14-25V PMOS 5V TTL, CMOS 615V CMOS, PMOS
ORDERING NUMBERS: ULN2001D/2D/3D/4D
PIN CONNECTION
These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers. The ULN2001A/2002A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULN2001D/2002D/2003D/2004D.
February 2002 1/8
ULN2001A - ULN2002A - ULN2003A - ULN2004A

SCHEMATIC DIAGRAM
Series ULN-2001A (each driver)
ABSOLUTE MAXIMUM RATINGS

Symbol Vo Vin Ic Ib Tamb Tstg Tj Output Voltage Input Voltage (for ULN2002A/D - 2003A/D - 2004A/D) Continuous Collector Current Continuous Base Current Operating Ambient Temperature Range Storage Temperature Range Junction Temperature Parameter Value 50 30 500 25 20 to 85 55 to 150 150 Unit V V mA mA C C C
THERMAL DATA
Symbol Rth j-amb Parameter Thermal Resistance Junction-ambient Max. DIP16 70 SO16 120 Unit C/W
2/8

ELECTRICAL CHARACTERISTICS (Tamb = 25oC unless otherwise specified)
Symbol ICEX Parameter Output Leakage Current Test Conditions VCE = 50V Tamb = 70C, VCE = 50V Tamb = 70C for ULN2002A VCE = 50V, Vi = 6V for ULN2004A VCE = 50V, Vi = 1V VCE(sat) Collector-emitter Saturation Voltage Input Current IC = 100mA, IB = 250A IC = 200 mA, IB = 350A IC = 350mA, IB = 500A for ULN2002A, Vi = 17V for ULN2003A, Vi = 3.85V for ULN2004A, Vi = 5V Vi = 12V Tamb = 70C, IC = 500A VCE = 2V for ULN2002A IC = 300mA for ULN2003A IC = 200mA IC = 250mA IC = 300mA for ULN2004A IC = 125mA IC = 200mA IC = 275mA IC = 350mA for ULN2001A VCE = 2V, IC = 350mA 0.5 Vi to 0.5 Vo 0.5 Vi to 0.5 Vo VR = 50V Tamb = 70C, VR = 50V IF = 350mA 1.7 1000 15 0.25 0.25 25 1 1 50 100 2 pF s s A A V 6 6 7 50 0.9 1.1 1.3 0.82 0.93 0.35 1 65 Min. Typ. Max. 50 100 Unit A A Fig. 1a 1a
500 500 1.1 1.3 1.6 1.25 1.35 0.5 1.45
A A V V V mA mA mA mA A V
1b 1b 2 2 2 3 3 3 3 4 5
Ii(on)
Ii(off) Vi(on)
Input Current Input Voltage
13 2.4 2.7 3 5 6 7 8 2
hFE Ci tPLH tPHL IR VF
DC Forward Current Gain Input Capacitance Turn-on Delay Time Turn-off Delay Time Clamp Diode Leakage Current Clamp Diode Forward Voltage
3/8

TEST CIRCUITS Figure 1a. Figure 1b.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
4/8

Figure 8: Collector Current versus Input Current Figure 9: Collector Current versus Saturation Voltage
Ic (mA) 500 Tj=25C
400 Max 300 200 TYPICAL 100 0
D96IN454
Ic (mA) Tj=25C 500
D96IN453
400 Max 300 200 TYPICAL 100 0 0.0 0.5 1.0 1.5 Vce(sat)
100
200
300
400
500
Ib(A)
Figure 10: Peak Collector Current versus Duty Cycle

Ic peak (mA) 500 400 300 200 100 0 0 20 40 60 80 DC
7 6 5 4 3 2
D96IN451
Figure 11: Peak Collector Current versus Duty Cycle

Ic peak (mA) 500 400 300
2 3
D96IN452A
NUMBER OF ACTIVE OUTPUT
Tamb=70C (SO16)
Tamb=70C (DIP16)
200
7
100
NUMBER OF ACTIVE OUTPUT
0 0 20 40 60 80 100 DC
5/8
DIM. MIN. a1 B b b1 D E e e3 F I L Z 0.51 0.77
mm TYP. MAX. MIN. 0.020 1.65 0.5 0.25 20 8.5 2.54 17.78 7.1 5.1 3.3 1.27 0.030
inch TYP. MAX.
OUTLINE AND MECHANICAL DATA
0.065 0.020 0.010 0.787 0.335 0.100 0.700 0.280 0.201 0.130
DIP16
0.050
6/8
DIM. MIN. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S 3.8 4.6 0.4 9.8 5.8 0.35 0.19 0.1
mm TYP. MAX. 1.75 0.25 1.6 0.46 0.25 0.5 45 (typ.) 10 6.2 1.27 8.89 4 5.3 1.27 0.62 8(max.) 0.150 0.181 0.016 0.386 0.228 0.014 0.007 0.004 MIN.
inch TYP. MAX. 0.069 0.009 0.063 0.018 0.010 0.020
OUTLINE AND MECHANICAL DATA
0.394 0.244 0.050 0.350 0.157 0.209 0.050 0.024
SO16 Narrow
(1) D and F do not include mold flash or protrusions. Mold flash or potrusions shall not exceed 0.15mm (.006inch).
7/8
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics Printed in Italy All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com
8/8

ULN2004AC-inversor Lvadora

Uploaded by

Copyright:

Available Formats

ULN2004AC-inversor Lvadora

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ULN2004AC-inversor Lvadora

Uploaded by

Copyright:

Available Formats

ULN2001A-ULN2002A ULN2003A-ULN2004A

SEVEN DARLINGTON ARRAYS

DIP16 ORDERING NUMBERS: ULN2001A/2A/3A/4A

ORDERING NUMBERS: ULN2001D/2D/3D/4D

ULN2001A - ULN2002A - ULN2003A - ULN2004A

Series ULN-2001A (each driver)

Series ULN-2002A (each driver)

Series ULN-2003A (each driver)

Series ULN-2004A (each driver)

ABSOLUTE MAXIMUM RATINGS

ULN2001A - ULN2002A - ULN2003A - ULN2004A

500 500 1.1 1.3 1.6 1.25 1.35 0.5 1.45

Input Current Input Voltage

hFE Ci tPLH tPHL IR VF

ULN2001A - ULN2002A - ULN2003A - ULN2004A

ULN2001A - ULN2002A - ULN2003A - ULN2004A

Ic (mA) Tj=25C 500

Figure 10: Peak Collector Current versus Duty Cycle

Figure 11: Peak Collector Current versus Duty Cycle

NUMBER OF ACTIVE OUTPUT

ULN2001A - ULN2002A - ULN2003A - ULN2004A

DIM. MIN. a1 B b b1 D E e e3 F I L Z 0.51 0.77

inch TYP. MAX.

OUTLINE AND MECHANICAL DATA

ULN2001A - ULN2002A - ULN2003A - ULN2004A

inch TYP. MAX. 0.069 0.009 0.063 0.018 0.010 0.020

OUTLINE AND MECHANICAL DATA

0.394 0.244 0.050 0.350 0.157 0.209 0.050 0.024

ULN2001A - ULN2002A - ULN2003A - ULN2004A

You might also like