Fill in The Correct Options: Pre Test Paper
Fill in The Correct Options: Pre Test Paper
Fill in The Correct Options: Pre Test Paper
2. Select a proper Authorized service provider from the choices___________. a. Ericsson b. GTL c. Reliance d. IEEE 3. Choose the odd one out from the following. a. EMS b. NMS c. GNOC d. BTS 4. TMSI allocation is the responsibility of ___________entity in GSM. a. HLR b. VLR c. EIR d. AUC 5. EDGE technology provides a data rate of___________. a. 270.833kbps b. 14.4Mbps c. 384kbps d. 2Mbps 6. ___________type of cell in GSM provides extremely high density and good quality but supports only pedestrian speeds. a. Macro cell b. Microcell c. Pico cell d. Femtocell
c. BSC d. MSC 8. In GSM, for a simple call setup and to locate a called party number requires operation of both _____________. a. HLR and VLR b. HLR and EIR c. VLR and EIR d. EIR and AUC 9. GPRS/EDGE core network uses _____________ packet switching protocol technology for packet transmission. a. Circuit switched b. IP c. X.25 d. None of these 10. Conversational class and streaming class services are also known as ____________ class in UMTS. a. Delay sensitive b. Error sensitive c. Background d. None of these 11. The band that is used to implement 3G in India is_________. a. 800 Mhz b. 900 Mhz c. 1800Mhz d. 2100Mhz 12. ___________type of spreading is used in WCDMA. a. DSSS b. THSS c. FHSS d. None of these 13. Iub Interface in 3G exists between ___________. a. Node-B & RNC b. UE & Node-B c. RNC to MSC d. None of these
14. Adaptive modulation scheme in EDGE uses ___________modulation technique. a. GMSK b. BPSK
c. 8-PSK d. GMSK & 8-PSK 15. Only hard hand over occurs in_________ technology. a. CDMA b. GSM c. WCDMA d. None 16. _____________logical channel is used to inform a handset about an incoming call in GSM. a. SDCCH b. SCH c. PCH d. BCCH 17. SGSN and GGSN are two new entities that have been introduced into NSS of ________network. a. GSM b. GPRS c. UMTS d. None 18. In _____________signaling technique there is a dedicated signaling channel between two exchanges. a. CAS b. CCS c. R2MF d. None 19. Under normal conditions handover related control information is informed to the handset through___________ logical channel in GSM. a. BCCH b. FCCH c. SCH d. SACCH
20. Which of the following modulation is tolerant to noise? a. GMSK b. QPSK c. 8-PSK d. 16-QAM
21. In____________ configuration, the entire capacity of the channel is reserved for transmission between two devices.
a. Point-to-point b. Point-to-Multipoint c. Multipoint-to-Multipoint d. Multipoint-to-point 22. Circle the odd one out a. Timing Advance b. Closed loop power control c. 3.84 MCPS d. Orthogonal codes 23. ______________ Provides IP address to the MS for data call a. GGSN b. PCU c. BTS d. BSC 24. MGW has been implemented for the first time in a. b. c. d. R99 R4 R5 R6
25. Which of the following is not true with respect to WCDMA network
a. b. c. d. WCDMA to EDGE handover 3GPP QoS WCDMA to EVDO handover Variable spreading to improve throughput