Scribd
Upload
421 views6 pages

CW-8188 Quick Install Guide

This document provides instructions for installing and setting up the 11N Wireless USB Adapter CW-8188. It describes the key features of the adapter, including support for 802.11n, WPA/WPA2 encryption, and transfer speeds up to 150 Mbps. The installation instructions guide the user to insert the USB adapter, install the driver software from the included CD, and then restart their computer. After installation, the user can open the wireless configuration utility to view available networks and complete setup by selecting a network, authentication, and encryption and entering the network key.

Uploaded by

Jenny Cordero Pallada
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
421 views6 pages

CW-8188 Quick Install Guide

This document provides instructions for installing and setting up the 11N Wireless USB Adapter CW-8188. It describes the key features of the adapter, including support for 802.11n, WPA/WPA2 encryption, and transfer speeds up to 150 Mbps. The installation instructions guide the user to insert the USB adapter, install the driver software from the included CD, and then restart their computer. After installation, the user can open the wireless configuration utility to view available networks and complete setup by selecting a network, authentication, and encryption and entering the network key.

Uploaded by

Jenny Cordero Pallada
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

11N Wireless USB Adapter CW-8188

Quick Install Guide

1.1

Overview of the Product

The adapter is an 802.11n client device; it is designed to provide a high-speed and unrivaled wireless performance for your computer or notebook. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. With the 802.11n technology, the CW-8188 transfer rate up to 150 Mbps for maximum throughput. It can also interoperate with other wireless (802.11b, 802.11g) products. The adapter supports WEP, WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed. The adapter is easy to install and manage. The Quick Setup Wizard guides you step-by-step through the installation process. With unmatched wireless performance, reception, and security protection, the CW-8188 is the best choice for easily adding or upgrading wireless connectivity to your notebook and computer.

1.2
z z z z z z

Features
Complies with IEEE802.11n, IEEE802.11g, IEEE802.11b standards Supports 1T1R technology Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, and 64/128 - bit WEP encryption Supports high rate of up to 150 Mbps download speed for maximum throughput Ease to configure and provides monitoring information Supports Windows 2000, XP, Vista, 7

1.3

System Requirement

You must have at least the following z A laptop computer/desktop PC with an available USB port z At least a 300MHz processor and 32MB of memory z Windows OS for Win98SE, ME, 2000, XP, Vista z A CD-ROM Drive z USB controller properly installed and working in the computer z A 802.11n 802.11g or 802.11b Wireless Access Point/Router (for infrastructure Mode) or another 802.11n802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode).

2.1

Installation

Please refer to the following steps to install wireless network card: 1. Insert the USB wireless network card into an empty USB2.0 port of your computer when computer has power on. Never use force to insert the card, if you feel its

stuck, flip the card over and try again. 2. Insert device driver CD into the CDROM drive of your computer 3. Select the language that you are familiar with (English). 4. Click the "Next" button to continue

5. Click "Install" button to begin the installation.

6. The Install Shield Wizard has successfully installed the Driver and Utility. Before you can used the program, you must restart your computer. Choose "Yes" and click "finish" button o restart your computer now.

2.2

Connect to AP

1. After Driver installation is complete, wireless configuration utility will be shown on the desktop of your computer. Double-click the icon in the figure below, access to the client management interface.

2. Available Network In Available Network configuration interface, you can view the wireless network in current environment.

Refresh: Refresh available network Add to Profile: add the specified available network to profile Double-click the wireless AP you want to connection, from the drop-down menu, select the network authentication model and data encryption, enter a network key, and then click "OK" button to complete the wireless network card configuration, and successfully connect to a wireless network. 3. General In General interface, you can see the current network connection status.

Add: add a wireless network profile Remove: remove a wireless network profile Edit: edit the specified wireless network profile Duplicate: duplicate an existing configuration file, and you can change your wireless network security settings and other information.

Thank you for purchasing a quality cd-r king Product. Please browse your product at : http://www.cdrking.com.ph/ for complete warranty information and future support for your product.

You might also like