ISO Rubber Test Methods_content

Contents
Standard
SS-ISO 34-1:2004 SS-ISO 34-2:2007 SS-ISO 36:2005 SS-ISO 37:2005

Edition
2 1 3 2 1

Title
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces (=ISO 34-1:2004) Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces (=ISO 34-2:1996) Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics (=ISO 36:2005) Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties (=ISO 37:2005) Corrigendum 1 (=ISO 37:2005/Cor 1:2008) Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) (=ISO 48:1994) Rubber, vulcanized or thermoplastic Determination of flex cracking and crack growth (De Mattia) (=ISO 132:2005) Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance tests (=ISO 188:1998) Rubber Determination of ash (=ISO 247:2006) Rubber, raw Determination of volatile-matter content (=ISO 248:2005) Rubber, raw natural Determination of dirt content (=ISO 249:1995) Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity (=ISO 249-1:2005) Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 2: Determination of pre-vulcanization characteristics (=ISO 289-2:1994) Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 3: Determination of the Delta Mooney value for non-pigmented, oilextended emulsion-polymerized SBR (=ISO 289-3:1999) Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate (=ISO 289-4:2003)

SS-ISO 37:2005/Cor 1:2008 SS-ISO 48:2007 SS-ISO 132:2005 SS-ISO 188:2007 SS-ISO 247 SS-ISO 248:2005 SS-ISO 249 SS-ISO 289-1:2005 SS-ISO 289-21 SS-ISO 289-31 1 3 2 2 2 1 2

SS-ISO 289-41 SS-ISO 812 SS-ISO 813 SS-ISO 814:2007 SS-ISO 815-1:2008 SS-ISO 815-2:2008 SS-ISO 1407 SS-ISO 1407/Cor1:2007 SS-ISO 1408
Rubber test methods_content

2 2 2

Rubber, vulcanized or thermoplastic Determination of low-temperature brittleness (=ISO 812:2006) Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method (=ISO 813:1997) Rubber, vulcanized Determination of adhesion to metal Two-plate method (=ISO 814:1996) Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures (=ISO 815-1:2008) Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures (=ISO 815-2:2008)

Rubber Determination of solvent extract (=ISO 1407:1992) Corrigendum 1 (=ISO 1407:1992/Cor1:2007)

2 2 2

Rubber Determination of carbon black content Pyrolytic and chemical degradation methods (=ISO 1408:1995) Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method (=ISO 1409:2006) Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing (=ISO 1431-1:2004)

SS-ISO 1409 SS-ISO 1431-1

SS-ISO 1431-3

Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (=ISO 1431-3:2000) Rubber, vulcanized or thermoplastic Determination of low temperature stiffening (Gehman test) (=ISO 1432:1998) Technical Corrigendum 1:2003 Rubber, raw natural, and rubber latex, natural Determination of nitrogen content (=ISO 1656:1996) Rubber, raw and rubber latex Determination of iron content 1,10Phenanthroline photometric method (=ISO 1657:1986) Rubber, vulcanized Determination of the effect of liquids (=ISO 1817:2005) Rubber, vulcanized or thermoplastic Determination of modulus in shear or ad hesion to rigid plates Quadruple shear method (=ISO 1827:1991) Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity (=ISO 1853:1998) Rubber, unvulcanized Determination of plasticity Rapid-plastimeter method (=ISO 2007:1991) Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (=ISO 2285:2001) Rubber, raw styrene-butadiene, emulsion-polymerized Determination of bound styrene content Refractive index method (=ISO 2453:1991) Technical Corrigendum 1:1996 Rubber products Determination of zinc content EDTA titrimetric method Rubber, vulcanized Determination of density (=ISO 2781:1988) Technical Corrigendum 1:1996 Rubber, vulcanized or thermoplastic Determination of permeability to gases (=ISO 2782:2006) Rubber Antistatic and conductive products Determination of electrical resistance (=ISO 2878:2005) Rubber, vulcanized Determination of low-temperature characteristics Temperature-retraction procedure (TR test (=ISO 2921:2005) Vulcanized rubber Determination of insulation resistance (=ISO 2951:2005) Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures (=ISO 3384:2005) Rubber Determination of crystallization effects by hardness measurements (=ISO 3387:1994) Technical Corrigendum 1:2000 Rubber Measurement of vulcanization characteristics with the oscillating disc curemeter (=ISO 3417:1991) Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material (=ISO 3865:2005) Rubber Nitrile latex Determination of residual acrylonitrile content (=ISO 3899:2005) Rubber Nitrile latex Determination of bound acrylonitrile content (=ISO 3900:1995) Rubber-coated fabrics Determination of rubber-to-fabric adhesion Direct tension method (=ISO 4637:1979)

SS-ISO 1432 SS-ISO 1432/ Cor 1 SS-ISO 1656 SS-ISO 1657 SS-ISO 1817:2005 SS-ISO 1827:2007 SS-ISO 1853 SS-ISO 2007:2007 SS-ISO 2285:2007

1 1 1 1 3 1 2 1 3

SS-ISO 2453 SS-ISO 2453/ Cor 1 SS-ISO 2454 SS-ISO 2781 SS-ISO 2781/ Cor 1 SS-ISO 2782:2006 SS-ISO 2878:2005 SS-ISO 2921:2005 SS-ISO 2951 SS-ISO 3384:2005 SS-ISO 3387 SS-ISO 3387/Cor 1 SS-ISO 3417 SS-ISO 3865:2005 SS-ISO 3899:2005 SS-ISO 3900 SS-ISO 4637

1 1 1 1 1 2 2 3 1 4 1 1 1 3 2 1 1

SS-ISO 4645 SS-ISO 4647 SS-ISO 4649 SS-ISO 4650:2005 SS-ISO 4655 1 SS-ISO 4661-2 SS-ISO 4662 SS-ISO 4664-1:2005 SS-ISO 4664-2:2006 SS-ISO 4665 SS-ISO 4666-1 SS-ISO 4666-2 SS-ISO 4666-3 SS-ISO 4666-4:2007 SS-ISO 5478:2006 SS-ISO 5600:2007 SS-ISO 5603:2007 SS-ISO 5893 SS-ISO 5945 SS-ISO 6101-1 SS-ISO 6101-2 SS-ISO 6101-3 SS-ISO 6101-4 SS-ISO 6101-5:2006 SS-ISO 6133

1 1 2 2

Rubber and rubber products Guide to the identification of antidegradants Thin layer chromatographic methods (=ISO 4645:1984 + Cor 1:1991) Rubber, vulcanized Determination of static adhesion to textile cord H-pull test (=ISO 4647:1982) Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device (=ISO 4649:2002) Rubber Identification Infrared spectrometric method (=ISO 4650:2005) Rubber Reinforced styrene-butadiene latex Determination of total bound styrene content (=ISO 4655:1985)

1 1 1 1 2 1 1 1

Rubber, vulcanized Preparation of samples and test pieces Part 2: Chemical tests (=ISO 4661-2:1987) Rubber Determination of rebound resilience of vulcanizates (=ISO 4662:1986) Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance (=ISO 4664-1:2005) Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 2: Torsion pendulum methods at low frequencies (=ISO 4664-2:2006) Rubber, vulcanized or thermoplastic Resistance to weathering (=ISO 4665:2006) Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 1: Basic principles (=ISO 4666-1:1982) Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 2: Rotary flexometer (=ISO 4666-2:1982) Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 3: Compression flexometer (=ISO 4666-3:1982) Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant stress flexometer (=ISO 5603:2007)

2 2 2 2 1 1 1 1 1 2 2

Rubber Determination of styrene content Nitration method (=ISO 5478:2006) Rubber Determination of adhesion to rigid materials using conical shaped parts (=ISO 5600:2007) Rubber, vulcanized Determination of adhesion to wire cord (=ISO 5603:2007) Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification (=ISO 5893:2002) Rubber Determination of polyisoprene content (=ISO 5945:1989) Rubber Determination of metal content by atomic absorption spectrometry Part 1: Determination of zinc content (=ISO 6101-1:1991) Rubber Determination of metal content by atomic absorption spectrometry Part 2: Determination of lead conten (=ISO 6101-2:1997) Rubber Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content (=ISO 6101-3:1997) Rubber Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content (=ISO 6101-4:1997) Rubber Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content (=ISO 6101-5:2006) Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (=ISO 6133:1998)

SS-ISO 6179

Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique) (=ISO 6179:1998) Rubber, raw, natural Determination of castor oil content Part 1: Determina tion of castor oil glyceride content by thin-layer chromatography (=ISO 6225- 1:2006) Rubber, raw, natural Determination of castor oil content Part 2: Determina tion of total ricinoleic acid content by gas chromatography (=ISO 6225-2:1990) Rubber, raw Determination of block polystyrene content Ozonolysis method (=ISO 6235:1995) Rubber Guide to the use of curemeters (=ISO 6502:1999) Rubber, vulcanized or thermoplastic Determination of tendency to adhere to and corrode metals (=ISO 6505:2005) Rubber Determination of total sulfur content Part 1: Oxygen combustion flask method (=ISO 6528-1:1992) Rubber Determination of total sulfur content Part 2: Sodium peroxide fusion method (=ISO 6528-2:1992) Rubber Determination of total sulfur content Part 3: Furnace combustion method (=ISO 6528-3:1988) Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation (=ISO 6914:2004) Rubber, vulcanized Determination of tension fatigue (=ISO 6943:2007) Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method (=ISO 7267-1:1997) Rubber-covered rollers Determination of apparent hardness Part 2: Shoretype durometer method (=ISO 7267-2:1986) Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method (=ISO 7267-3:2007) Rubber Determination of free sulphur (=ISO 7269) Technical Corrigendum 1:2002 Rubber Analysis by pyrolytic gas-chromatographic methods Part 1: Identification of polymers (single polymers and polymer blends) (=ISO 7270- 1:2003) Rubber Analysis by pyrolytic gas-chromatographic methods Part 2: Determination of styrene/butadiene/isoprene ratio (=ISO 7270-2:2005) Rubber, raw and unvulcanized compounded Determination of plasticity number and recovery number Parallel-plate method (=ISO 7323:2006) Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) (=ISO 7619-1:2004) Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method (=ISO 7619-2:2004) Rubber and rubber products Determination of bromine and chlorine content Oxygen flask combustion technique (=ISO 7725:1991) Rubber, vulcanized or thermoplastic Determination of compression stressstrain properties (=ISO 7743:2004) Rubbers and rubber latices Determination of manganese content Sodium periodate photometric methods (=ISO 7780:1998) Styrene-butadiene rubber, raw Determination of soap and organic-acid content (=ISO 7781:2008)

SS-ISO 6225-1:2006

SS-ISO 6225-2 SS-ISO 6235 SS-ISO 6502 SS-ISO 6505:2005 SS-ISO 6528-1 SS-ISO 6528-2 SS-ISO 6528-3 SS-ISO 6914:2004 SS-ISO 6943:2007 SS-ISO 7267-1 SS-ISO 7267-2 SS-ISO 7267-3:2007 SS-ISO 7269 SS-ISO 7269 Cor1 SS-ISO 7270-1

1 1 2 2 1 1 1 2 1 2 1 1 1 1 1

SS-ISO 7270-2: 2005 SS-ISO 7323:2006 SS-ISO 7619-1: 2004 SS-ISO 7619-2: 2004 SS-ISO 7725 SS-ISO 7743:2004 SS-ISO 7780 SS-ISO 7781:2008

1 2 1 1 1 2 1 2

SS-ISO 8013:2006 SS-ISO 8053 SS-ISO 8054 SS-ISO 9026:2007 (=ISO 9026:2007) SS-ISO 9028:2006 SS-ISO/TR 9272: 2005 SS-ISO 9924-1

2 1 1 2 2 2 2

Rubber, vulcanized Determination of creep in compression or shear (=ISO 8013:2006) Rubber and latex Determination of copper content Photometric method (=ISO 8053:1995) Rubber, compounded or vulcanized Determination of sulfide sulfur content Iodometric method (=ISO 8054:1996) Raw rubber or unvulcanized compounds Determination of green strength Rubber Dissolution by acid digestion (=ISO 9028:2006) Rubber and rubber products Determination of precision for test method standards (=ISO/TR 9272:2005) Rubber and rubber products Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Part 1: Butadiene, ethylenepropylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrenebutadiene rubbers (=ISO 9924-1:2000) Rubber and rubber products Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Part 2: Acrylonitrile-butadiene and halobutyl rubbers (=ISO 9924-2:2000) Rubber Identification of accelerators in cured and uncured compounds (=ISO 10398:1998) Rubber, raw synthetic Determination of anti-degradants by high-performance liquid chromatography (=ISO 11089:1997) Rubber, raw synthetic Determination of the molecular-mass distribution of so lution polymers by gel permeation chromatography (=ISO 11344:2004) Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods (=ISO 11345:2006) Rubber, vulcanized or thermoplastic Estimation of life-time and maximum temperature of use (=ISO 11346:2004) Butadiene rubber Determination of microstructure by infra-red spectrometry (=ISO 12965:2000) Technical Corrigendum 1:2006 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (=ISO 13226:2005) Corrigendum 1 (=ISO 1326:2005/Cor 1:2007) Rubber Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy (=ISO 14558:2000) Rubber Determination of frictional properties (=ISO 15113:2005) Rubber and rubber additives Determination of total sulfur content using an automatic analyser (=ISO 15671:2000) Rubber and rubber additives Determination of total nitrogen content using an automatic analyser (=ISO 15672:2000) Rubber, raw natural Determination of average molecular mass and molecularmass distribution by size exclusion chromatography (SEC) (=ISO 16564:2004) Amendmernt 1:2005 Rubber Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers (=ISO 16565:2002) Rubber, raw - Determination of residual monomers and other volatile lowmolecular - mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method (=ISO 17052:2007

SS-ISO 9924-2

SS-ISO 10398 SS-ISO 11089 SS-ISO 11344:2004 SS-ISO 11345:2006 SS-ISO 11346:2004 SS-ISO 12965

1 1 1 2 2 1

SS-ISO 12965:2000/Cor 1 1 SS-ISO 13226:2005 2

SS-ISO 13226/Cor1:2007 1 SS-ISO 14558 SS-ISO 15113 SS-ISO 15671 SS-ISO 15672 SS-ISO 16564:2004 1 2 1 1 1

SS-ISO 16564:2004/Amd1 1 SS-ISO 16565 SS-ISO 17052:2007 1 1

SS-ISO 17564 SS-ISO 18517:2005 SS-ISO 18898:2006 SS-ISO 18899:2004 SS-ISO 19003:2006 SS-ISO 19004:2004 SS-ISO 21561:2005 SS-ISO 22768:2006 SS-ISO 23337:2007 SS-ISO 23529:2004 SS-ISO 23794: 2004

1 1 1 1 1 1 1 1 1 1 1

Nitrile rubber Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value (=ISO 17564:2001) Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide (=ISO 18517:2005) Rubber Calibration and verification of hardness testers (=ISO 18898:2006) Rubber Guide to the calibration of test equipment (=ISO 18899:2004) Rubber and rubber products Guidance on the application of statistics to physical testing (=ISO 19003:2006) Rubber and rubber products Determination of the sensitivity of test methods (=ISO 19004:2004) Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR (=ISO 21561:2005) Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) (=ISO 22768:2006) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine (=ISO 23337:2007) Rubber General procedures for preparing and conditioning test pieces for physical test methods (=ISO 23529:2004) Rubber, vulcanized or thermoplastic Abrasion testing Guidance (=ISO 23794:2003)