PL 008748
PL 008748
PL 008748
PL 008-748
June 2001
9100A and 9200A Series Flanged Magnetic Flowtubes 9100A Series with Neoprene or EPDM Liners 1 to 78 in (25 to 2000 mm) Nominal Flowtube Sizes Style A and 9200A Series with Neoprene, EPDM, Linatex, Ebonite, or ptfe Liners 8 to 48 in (200 to 1200 mm) Nominal Flowtube Sizes Style A
*Parts preceded by an asterisk are recommended spare parts. Give instrument Model Number and Style when ordering. See Recommended Spare Parts Summary section for quantities. TO ORDER PARTS, CALL FOXBORO AT 1-888-FOXBORO (1-888-369-2676).
PL 008-748 Page 2 MODEL CODE 9100A Series Magnetic Flowtubes Nominal Flowtube Size (a) DN Flange Size Inch Flange Size 25 mm 1 in 40 mm 1 1/2 in 50 mm 2 in 65 mm 2 1/2 in 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm 350 mm 400 mm 450 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1200 mm 1400 mm 1600 mm 1800 mm 2000 mm 3 in 4 in 5 in 6 in 8 in 10 in 12 in 14 in 16 in 18 in 20 in 24 in 28 in 30 in 32 in 36 in 40 in 42 in 44 in 48 in 54 in 60 in 66 in 72 in 78 in Model 9101A 911HA 9102A 912HA 9103A 9104A 9105A 9106A 9108A 9110A 9112A 9114A 9116A 9118A 9120A 9124A 9128A 9130A 9132A 9136A 9140A 9142A 9144A 9148A 9154A 9160A 9166A 9172A 9178A
Tube Construction AISI Type 304 Stainless Steel Tube (304 ss) End Connections ANSI Class 150, Carbon Steel Flange - 1 to 24 in Line Sizes AWWA C-207, Class D, Carbon Steel Flange - 28 to 78 in Line Sizes PN 6, BS 4504 (DIN 2501), Carbon Steel Flange - 1400 to 2000 mm Line Sizes PN 10, BS 4504 (DIN 2501), Carbon Steel Flange - 200 to 2000 mm Line Sizes PN 16, BS 4504 (DIN 2501), Carbon Steel Flange - 65 to 2000 mm Line Sizes PN 40, BS 4504 (DIN 2501), Carbon Steel Flange - 25 to 50 mm Line Sizes
SI
BA WB ZZ ZD ZE ZG
(a) See End Connection selections further in Code to determine ANSI, AWWA, and BS (DIN) flanges applicable to each flowtube size.
PL 008-748 Page 3 MODEL CODE (Cont.) 9100A Series Magnetic Flowtubes (Cont.) Liner Material Neoprene EPDM (an Ethylene Propylene Terpolymer) Electrodes AISI Type 316Ti Stainless Steel (316Ti ss) - Fluid Reference Electrode Included Coil Drive Pulsed dc Housing Construction/Transmitter Mounting Coated Carbon Steel Housing with Aluminum Terminal Box Terminal Box has 1/2 inch Conduit Threads Remote Mounted Transmitter Coated Carbon Steel Housing with Polyamide Terminal Box Terminal Box has PG13.5 Conduit Threads with Cable Glands Remote Mounted Transmitter Electrical Safety (Also see Electrical Safety Specifications section) CSA, General Purpose (Ordinary) Locations FM, General Purpose (Ordinary) Locations No Approvals - Flowtube Marked with CE Logo Example: 9116A-SIBA-ESJ-PM -N -E
-G
-P
K M Z
PL 008-748 Page 4 MODEL CODE 9200A Series Magnetic Flowtubes Nominal Flowtube Size (a) DN Flange Size Inch Flange Size 200 mm 8 in 250 mm 10 in 300 mm 12 in 350 mm 14 in 400 mm 16 in 450 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1200 mm 18 in 20 in 24 in 28 in 30 in 32 in 36 in 40 in 42 in 44 in 48 in Model 9208A 9210A 9212A 9214A 9216A 9218A 9220A 9224A 9228A 9230A 9232A 9236A 9240A 9242A 9244A 9248A
Tube Construction AISI Type 304 Stainless Steel Tube (304 ss) End Connections ANSI Class 150, Carbon Steel Flange - 8 to 24 in Line Sizes ANSI Class 150, Stainless Steel Flange - 8 to 24 in Line Sizes ANSI Class 300, Carbon Steel Flange - 8 to 24 in Line Sizes AWWA C-207, Class D Carbon Steel Flange - 28 to 48 in Line Sizes AS 2129, Table E, Carbon Steel Flange - 200 to 1200 mm Line Sizes BS 4505 (DIN 2501), PN 6, Carbon Steel Flange - 200 to 1200 mm Line Sizes BS 4505 (DIN 2501), PN 6, Stainless Steel Flange - 200 to 600 mm Line Sizes BS 4505 (DIN 2501), PN 10, Carbon Steel Flange - 200 to 1200 mm Line Sizes BS 4505 (DIN 2501), PN 10, Stainless Steel Flange - 200 to 600 mm Line Sizes BS 4505 (DIN 2501), PN 16, Carbon Steel Flange - 200 to 1200 mm Line Sizes BS 4505 (DIN 2501), PN 16, Stainless Steel Flange - 200 to 600 mm Line Sizes BS 4505 (DIN 2501), PN 25, Carbon Steel Flange - 200 to 600 mm Line Sizes BS 4505 (DIN 2501), PN 40, Carbon Steel Flange - 200 to 600 mm Line Sizes Liner Material Neoprene EPDM (an Ethylene Propylene Terpolymer) ptfe High Temperature - 180C (350F) Limit; Includes Two Type E Liner Protection Rings ptfe - 120C (250F) Limit Ebonite Linatex
(a) See End Connection selections further in Code for ANSI, AWWA, AS, and DIN flanges applicable to each flowtube size.
SI
BA BB BD WB YA ZZ ZK ZD ZL ZE ZM ZF ZG
-N -E -H -T -B -L
PL 008-748 Page 5 MODEL CODE (Cont.) 9200A Series Magnetic Flowtubes (Cont.) Electrodes(a) AISI Type 316Ti Stainless Steel (316Ti ss) 316 ss, Ceramic Coated Hastelloy C-276 Platinum-Iridium Titanium Monel Tantalum Coil Drive Pulsed dc Housing Construction/Transmitter Mounting Coated Carbon Steel Housing with Aluminum Terminal Box Terminal Box has 1/2 inch Conduit Threads Remote Mounted Transmitter Coated Carbon Steel Housing with Polyamide Terminal Box Terminal Box has PG13.5 Conduit Threads with Cable Glands Remote Mounted Transmitter Electrical Safety (Also see Electrical Safety Specifications section) CSA, General Purpose (Ordinary) Locations CSA, Class I, Division 2 FM, General Purpose (Ordinary) Locations FM, Nonincendive, Class I, Division 2 CENELEC, EEx e ia, IIC No Approvals or Certifications - Flowtube Marked with CE Logo Example: 9216A-SIBA-NSJ-PM
(a) Fluid reference electrode included, except for flowtubes with a ptfe liner.
S G H P T M B
-G
-P
K L M N S Z
PL 008-748 Page 6 FIGURE 1 9100A or 9200A Flanged Magnetic Flowtube Assembly with Plastic Terminal Box Assembly
2
TERMINAL BOX BASE ASSEMBLY GASKET (REFERENCE) FLOWTUBE ASSEMBLY, SEE NOTE BELOW.
TOP INTERNAL VIEW FOUR SCREWS ON SQUARE HOLE PATTERN ALLOW TERMINAL BOX TO BE ROTATED 90 IN EITHER DIRECTION CAPTIVE SCREWS, PART OF ITEM 1
3 1
NUTS, PART OF ITEM 1 PLASTIC CAP PLUGS FOR SHIPMENT ONLY. REMOVE AND REPLACE UNUSED HOLES WITH NEMA 4X PLUGS
Item 1
Qty. 1
Part Name Base Assembly, Plastic (Polyamide) Terminal Box Includes Terminals, but not Cover or Gasket Terminal Box Cover, Plastic (Polyamide) - Includes Gasket Cable Gland, PG 13.5; Black Polyamide
*2 3
083B0069 083G0228
1 2
NOTE
1. The flowtube itself has no replaceable parts and must be ordered as a complete assembly with the terminal box assembled to it. The Model Number of the complete assembly can be taken from the data plate, or created using the Model Codes shown in this Parts List. 2. Type E 316 ss rings for liner protection and grounding are provided with each flowtube lined with high temperature ptfe. Refer to Figure 4 and Table 2.
PL 008-748 Page 7 FIGURE 2 9100A or 9200A Flanged Magnetic Flowtube Assembly with Aluminum Terminal Box Assembly
1
TOP INTERNAL VIEW FOUR SCREWS ON SQUARE HOLE PATTERN ALLOW TERMINAL BOX TO BE ROTATED 90 IN EITHER DIRECTION
TWO CABLE ENTRY HOLES, 0.500-14 NPT THREADS. FOR CONDUIT OR CABLE GLANDS. REMOVE AND DISCARD PLASTIC CAP PLUGS PRIOR TO INSTALLATION. UNUSED HOLE, IF APPLICABLE MUST BE CLOSED WITH NEMA 4X PLUGS.
Item 1
Qty. 1
Part Name Base, Aluminum Terminal Box Excludes Terminal Blocks, Cover, and Gasket Terminal Box Cover, Aluminum Gasket, Terminal Box Cover Screw, Captive; Cross-Recessed Panhead; ss, 0.194-32 x 0.750
2 *3 4
1 1 4
NOTE
The flowtube itself has no replaceable parts and must be ordered as a complete assembly with the terminal box assembled to it. The Model Number of the complete assembly can be taken from the data plate, or created using the Model Codes shown in this Parts List.
PL 008-748 Page 8 FIGURE 3 Optional Type C Liner Protection (Grounding) Rings with Flowtubes having Neoprene, EPDM, Linatex, or Ebonite Liners
RING CONFIGURATION BOLT HOLE FOR STRAP RELATIONSHIP OF PARTS GASKET BY USER RING ASSEMBLY RING SEE TABLE 1
GASKET BY USER FLOWTUBE FLANGE BOLTS BY USER PIPELINE FLANGE FLOWTUBE FLANGE
(a) Type C 304 ss rings are used with Neoprene, EPDM, Linatex, and Ebonite lined flowtubes. Rings are not needed for fluid reference ground because flowtube includes grounding electrodes. (b) Contact Foxboro.
PL 008-748 Page 9 FIGURE 4 Optional Type E Liner Protection (Grounding) Rings Used for both Liner Protection and Process Fluid Grounding with Flowtubes having ptfe Liners Only
RING CONFIGURATION RELATIONSHIP OF PARTS FLOWTUBE FLANGE BOLTS BY USER GASKET BY USER FLOW ptfe LINER GASKET BY USER RING ASSEMBLY RING WITH FOUR BOLT HOLES, SEE TABLE 2
RING
RING BOLT (4) BY USR PIPELINE FLANGE FLANGE BOLT HOLES FOUR BOLT HOLES FOR BOLTING RING TO FLOWTUBE FLANGE, BY USER
Table 2. Part Numbers for Type E 316 ss Rings used for Liner Protection and Process Fluid Grounding(a)
Flowtube Size DN Inch Flange Size Flange Size 200 mm 8 in 250 mm 10 in 300 mm 12 in 350 mm 14 in 400 mm 16 in 450 mm 18 in 500 mm 20 in 600 mm 24 in DIN PN 6 083N8129 083N8135 083N8144 083N8152 083N8160 083N8168 083N8177 083N8186 Flange Type with Type E 316 ss Ring - Part Numbers DIN PN 10 083N8130 083N8136 083N8144 083N8153 083N8161 083N8169 083N8178 083N8187 DIN PN 16 083N8130 083N8137 083N8145 083N8154 083N8162 083N8170 083N8179 083N8188 DIN PN 25 083N8131 083N8138 083N8146 083N8155 083N8163 083N8171 083N8180 083N8189 DIN PN 40 083N8132 083N8139 083N8147 083N8156 083N8164 083N8172 083N8181 ANSI Cl. 150 083N8370 083N8140 083N8148 083N8157 083N8165 083N8173 083N8182 083N8190 ANSI Cl. 300 083N8133 083N8141 083N8149 083N8158 083N8166 083N8174 083N8183 083N8191 AS 2129 Tbl. E 083N8134 083N8143 083N8151 083N8153 083N8161 083N8176 083N8185 083N8193
(a) Type E 316 ss rings are used with ptfe-lined flowtubes only. For flowtubes with a high temperature ptfe liner, two rings are provided as standard.
PL 008-748 Page 10 RECOMMENDED SPARE PARTS SUMMARY Number of Parts Recommended for Figure Number 1 2 Item Number 2 3 Part Number 083B0069 D0164XG Part Name Plastic Terminal Box Cover and Gasket Gasket, Aluminum Terminal Box Cover 1 Inst. 1 1 5 Inst. 1 1 20 Inst. 2 2
The Foxboro Company 33 Commercial Street Foxboro, MA 02035-2099 United States of America http://www.foxboro.com Inside U.S.: 1-888-FOXBORO (1-888-369-2676) Outside U.S.: Contact your local Foxboro representative. Facsimile (508) 549-4492 An Invensys company
Foxboro is a registered trademark of The Foxboro Company. Invensys is a trademark of Invensys plc. Hastelloy is a trademark of Haynes International. Linatex is a trademark of Wilkinson Process Rubber, Ltd. Monel is a trademark of Inco Alloys International, Inc. Neoprene is a trademark of E. I. duPont de Nemours & Company. All other brand names may be trademarks of their respective companies. Copyright 2001 The Foxboro Company All rights reserved MB 150 Printed in U.S.A. 0601