History of Printing in Nigeria
History of Printing in Nigeria
History of Printing in Nigeria
We can chart our future clearly and wisely only when we know the path which has led to the present - Adlai Stevenson
The Evolution of Printing in Nigeria The 19th century marked the beginning of the evolution of printing in Nigeria. Precisely in 1846, two missionaries Hope Waddel, with the help of his assistant Samuel Edgerly, established the first printing press at Calabar, South Eastern Nigeria. The Hope Waddel Press, as the press was later named, was used for the mass production of religious tracts and booklets. The Missionary Rev. Henry Townsend raised the bar when he established another press in the Western part of the country in 1854. He also started a school of printing where he trained pupils at Abeokuta. Five years later, Townsend started Iwe Irohin, the first newspaper in Nigeria. Unfortunately, the Mission Printing Press established by Townsend folded up in 1867 due to the cultural and political crisis that erupted between the Egba people and the European settlers.1 Prior to the collapse of Townsends printing press, what can be regarded as an evolving printing industry had already taken root. This evolution can be attributed to a number of factors. First, the proliferation of missionary activities in Nigeria resulted in the setting up of presses which served as a means of publicizing and propagating the different faiths. As a matter of fact, many of the missionaries came with their printing presses. Second, the evolving and flourishing newspaper industry at the time also stimulated the establishment of printing presses. Worthy of mention are the printing presses set up in 1862 by Robert Cambell, and the Caxton Printing Press established in 1875 by Richard Blaize. As records indicate, by the end of the 1880s not less than five printing presses had been established in Lagos.2 The third factor is the quest for high quality printing. This became the driving force behind the publishers investment in efficient printing 1
equipment. Thus, by 1910 modern and more efficient printing presses were established in Lagos. This made it possible for newspapers (the major markets for printing presses.) to avail themselves of a wide range of services.3 The Colonial Governments shaping of the Fledgling Printing Industry Aside from the missionaries and the newspaper publishers, another vital influence on the fledging printing industry in Nigeria at the early period was the colonial government. The first Government Printing House was established at Broad Street, Lagos in 1914. It provided stationery materials to the Government. During the colonial era, four Government Press Offices were established at Enugu, Ibadan, Cameroon and Lagos. It had initial staff strength of less than two hundred. However, by 1933, the production capacity of the press had improved tremendously. Production later included Trade Journals, Letter of Credence, White Papers, Rules and Regulations, Treasury Books and Forms, etc. Consequent upon this, the department became a very important body in Government; hence, a printing regulation law (Printing Press Regulations Ordinance) to protect the Press was enacted in 1933.4
The Opening up of the Early Printing Industry in Nigeria The participation of business people and organizations who saw the great potentials in Nigerias emerging and burgeoning printing industry took the industry to great heights. A businessman by the name Adeshigbin inaugurated his Tika-Tore Press in 1910. This was followed by the establishment of the CMS Press in Lagos in 1913. Worthy of mention is Samuel Pearce who started Awoboh Press in 1920. Others that followed suit in 1923 included Ajibades Hope Rising Press, Washington Osilajas Ife Olu Press, P.C. Thomas Ekabo Press and Babamubonis Tanimola Press. All the above mentioned presses provided cheap and competitive printing services to newspaper publishers.5 A landmark in the history of printing in Nigeria was made with the inauguration of the Nigerian Printing and Publishing Company in 1925 to publish the Nigerian Daily Times. The company, with the availability of sufficient funds, was able to purchase a printing plant sufficient to set up a printing house capable of publishing the Nigerian Daily Times and the African Messenger and local job work6 Thereafter, in September 1925, the company purchased a second-hand Demy Wharfadale Printing machine and accessories, a new guillotine, type accessories, paper and 2
insurance. During this period, the Daily Times printery had no mechanical composing machine for type assembly, but then the dexterity of the compositors of this era remains a marvel as they could assemble eight to ten words a minute. The mechanical composing machine (Intertype) was eventually introduced in the company in 1939.7 Progressively, the printing business in Nigeria continued to grow due to its viability, which accounted for well over 30 print houses as at 1930. In 1948, a UK newspaper Daily Mirror successfully bought into the Nigerian Printing and Publishing Company, thus bringing forth the first rotary printing press imported into Nigeria from England. In addition, more linotypes and other necessary machinery were shipped in. This was a shot in the arm for the newspaper company as it signaled the beginning of immense technological development for the Daily Times printery and by consequence the budding printing industry in Nigeria at that point in time.8 The period 1948-1958 brought with it massive development in printing technology in Nigeria. This was the period the Daily Mirror Newspapers Limited of London successfully acquired shares in Daily Times newspapers. Mechanical composing machines, founding equipment and a one-unit Foster rotary Press were shipped in from the Daily Mirror in London to Lagos. The rotary printing machine made mass production possible and this gave Daily Times an edge over other printing presses.
For a very long time letterpress printing process held sway in the Nigerian printing Industry. By the 1970s, however, the print demands of Nigerians had exceeded what letterpress could deliver. This brought about the era of lithography and offset machines. From the late 70s to late 90s, printing companies gradually bade farewell to letterpress and embraced offset machines. Rather than use metal types, printing could be done using photosensitive plates. Cut and paste graphic artists had a field day. Production was faster. Printed information could reach the populace faster. Information was flowing, shaping the thoughts, the outlook and perceptions of Nigerians.
The Digitalization of Print in Nigeria The late 1980 and the early 1990s featured the era of computers with various types of hi-tech printing equipment emerging on the printing industry landscape. Available records indicate that
Task Systems in 1987, pioneered desktop publishing and computer graphics in Nigeria with Apple Computers.9 Today, the printing industry is hugely driven by computer technology, resulting in better print quality, faster production and higher profit for print investors. Technology has served print production in various ways. Computers have made page layout and printing faster and more accurate, helping to control production cost and give better print quality. Easy-to-use, and inexpensive computer hardwares and softwares can now be combined for desktop publishing, small - scale print design, layout and production.
Afolabi (2008) in his analysis of the effect of technology on the print media industry in Nigeria notes that technological changes in the industry have been spurred by print buyers demand for high quality colour reproduction, shorter print runs and shrinking production cycle times.10 In addition to these factors, there also comes to play printers search for ways to decrease production cost, increase efficiency and enhance customer satisfaction. In essence, it can be said that the Nigerian printing industry, in tune with global practice, is not behind in adopting new technologies with a view to attaining high levels of competitiveness.
Colour separation started in Nigeria with the use of analogue separation. Awoga (n.d) records that Chronograph Limited located then around Tafawa Balewa Square in Lagos started experimenting with commercial colour separation around 1969-1970. Another name associated with pioneering colour separation in Nigeria in the late sixties is Academy Press in Lagos. 11 Digital colour separation actually commenced in Nigeria during the 1990s when print investors saw the need and viability of colour separation in the print production process. By mid 1990s a number of colour separation outfits such as Vicoda Repro, Lithotec, Transcan, Hywill Graphics, MacGrafix, Clear impression etc were on ground to provide the much-expected digital colour separation needs for the printing industry.12
Computer to plate system completely phase out the need for films. In this technology, the image created in a Desktop Publishing (DTP) application is output directly to a printing plate. Kipphan (2001) notes that since several intermediate film-handling stages in the production of the printing plates are dispensed with, it has become easier to meet the quality requirements of print jobs.13 Punch Newspapers made the pioneer effort of introducing the use of CTP (computer-to-plate) in 4
newspaper production in Nigeria in 2003. Little wonder then that the newspaper ranks high in terms of revenue from print advertisement. The print output of the newspaper is superlatively high and in the words of Azubuike Ishiekwene the introduction of the use of CTP (computer-toplate) and the use of digital cameras by reporters has helped to improve speed, quality and efficiency,"14
Direct Image (DI) technology, the technology that prints directly from the computer to the printing press, was introduced in Nigeria in 2001. Planet press in Lagos pioneered the cutting edge technology. Prior to this, high quality printing was done abroad. Since the emergence of DI in 2001, such high quality printing is now done in Nigeria. At present, there are several DI centers dotting the landscape of Nigeria.
A digital press does not use plates or static image carriers, so each printed piece can be completely different from the last.15 The authors of the book Designers Prepress Companion, Berlin, Kim and Talcott (2002) explain that digital printing is an integral process for both ondemand and variable-data printing. They explain that with digital printing, each impression can be different because it does not use image plates or static image carriers; the image is created on the images carrier for each impression.16 This feature of the digital press makes it a good tool for personalization of print communication products. In a similar vein, Clem J. and Link P. (2005) explain that since the printed product created by the digital press requires less setup for production than traditional printing methods, it is typically more economical (less cost per impression) for use in short-run printing situations17. However, digital printing may not be the most economic solution to jobs of large volumes. The saying technology drives business and business drives technology holds true with the development of the digital press in the print communications industry. The need for personalization, which is the hallmark of direct-mail advertising, provides an impetus for the deployment of digital presses. Direct-mails like sales letters, brochures, catalogs etc are efficient, effective and economical media for sales and business promotion. These print products can be 5
personalized for each recipient since each can contain different names, addresses, colours, or any other information that is programmed from the database.
The increasing growth of the direct marketing industry in Nigeria has provided a market for digital presses which office equipment manufacturers like Xerox, OKI print solutions, Konika Minolta, Hewlett Packard, etc are tapping into. There is no doubt that the further growth of the direct marketing industry will bring about a corresponding increase market for digital presses. Aside the need for personalization, the increasing demand for short run jobs presents more markets for manufacturers and marketers of digital presses.
Conclusion and Recommendations From the early period in 1846 to the present, printing in Nigeria has developed appreciably well in response to various technological developments and changing market needs. Nonetheless, the printing industry is yet to reach the promise land. To move the industry a notch higher than the present level, the following are suggested: A Change of Business Model: the traditional printing companies have to reassess their product lines and continually ask themselves pertinent questions: What new computer-based product will sell in todays market? How much should be invested? Who are the audiences and how can they be reached? The answers to these questions will determine the winners and losers in the new information environment. Specifically, Nigerian printers must start to view and position themselves as print communication providers rather than print commodity manufacturers. In other words, Nigerian printers must continuously redefine their businesses in order to prosper in the future. In very practical terms, it means print media operators must be more innovative and take a broader view of their business.
Adequate Funding: Access to loans for investments by printers should be facilitated by the government through financial agencies. Training and Re-training: constant updating of knowledge and skills is vital. The Chartered Institute of Professional Printers in Nigeria (CIPPON) has a huge role to play in putting in place 6
training programs for her members. The training of printers is a crucial role that should not be left to educational institutions and print organizations. Beside, there is an urgent need for the incorporation of Printing Technology into the programme offerings of Universities of Technology in Nigeria. These institutions will thus be able to provide the much-needed highlevel managerial hands for the print media industry.
On a final note, a high income industry like the printing industry should not be left to haphazard development; the task of taking Nigerias printing industry to a world class level is a duty for all.
Notes 1. Daramola, Ifedayo. (2006). History and development of mass media in Nigeria. Lagos: Rothan Press Ltd. P.11. 2. Ibid, p. 11 3. Echeruo, M (1976). History of the Nigerian press. In The Story of the Daily Times 1926-1976. Lagos: Daily Times of Nigeria Ltd. p.7. 4. Federal Government Press of Nigeria records. 5. Echeruo, p. 7- 8 6. The Story of the Daily Times 1926-1976. Lagos: Daily Times of Nigeria Ltd. p.13 7. Ibid, p. 34 8. Ibid, p.35 9. Nigeria Communications Week, January 11, 2010. 10. Afolabi, A. (2008). ICT: Driving the print media industry in Nigeria. Technology Times. 11. Awoga, A. (n.d). Practical Computer and Digital Colour Separation. Lagos: Wal-Lab Publishing Company, p. 1-2 12. Printers Digest, March 2005 13. Kipphan, H. (2001). Handbook of print media: Technologies and production methods. Berlin: Springer. P. 593. 14. (www.afrol.com) 15. Digital printing; NAPL, p. 9.
16. Berlin, J., Kim C, and Talcott, J. (2004) Designers Prepress Companion. New Jersey: National Association for printing Leadership p. 166
17. Clem J. and Link P. (2005) Prepress for Digital printing: An Introduction to prepress methods for the digital age. United States: Xerox Corporation, p. viii
Afolabi teaches at the Department of Printing Technology, Yaba College of Technology. He is the author of the book Graphic Communication in Nigeria