THYRISTOR SWITCH THYRO-S
C O N TA C T- F R E E A N D S A F E
SVS
The thyristor switches of type Thyro -S, are ideal for modern process technology. This includes the following applications: furnace building (industrial and diffusion furnaces, drying ovens) machine building (extrusion and plastic presses), the chemical industry (pipe-heating and pre-heating systems), glass manufacture and processing (melting, sheet-glass plant, feeder and rening plant), the automobile industry (paint-drying facilities), printing machines (IR drying) and the packaging industry (shrink tunnels). The Thyro -S units are electronic switches with antiparallel thyristors which can be used singly or in groups of two or three for AC or 3-phase current. They are activated by a logic signal e.g. a temperature controller and secure the power supply for an ohmic consumer rapidly, reliably and free of contact. This is carried out in the Thyrotakt full oscillation cycle mode (i.e. complete mains cycles are either switched on or off).
Secure isolation between control and power units (VDE 0160) Three-phase structure through combination of two or three Thyro-S units High efficiency Wear-free operation Integrated semiconductor fuses UL approved Thyro - S, type S HR and S HT Integrated load-circuit and self monitoring
Type S HR: central fault signal via relay (changeover switch) Type S HT: central fault signal via transistor (open collector) Fault signal via LED Quality standard to ISO 9001 - compliant
power
is your
Our
safety
SVS
power
is your
Our
safety
THYRISTOR SWITCH THYRO-S
T E C H N I C A L D ATA
SVS
TYPE Rated connected voltage Type current Operating mode Set-value input
Type S HR
Type S HT
Type S H
(application range) 230 V: 184 276 V; 400 V: 320 480 V; 500 V: 400 550 V 230; 400 V: 30; 45; 60 ; 100 A 500 V: 40 ; 60 ; 100 A Thyrotakt DC: "Off": 0 1.5 V "On": 3.5 30 V undercurrent yes via LED, fault-signal relay (changeover switch) 50 ; 60 Hz 3 Hz ohmic load single-phase AC voltage, three-phase economy, three-phase AC voltage with N conductor, 3 x single-phase AC voltage 10 C to + 45 C 25 C to + 70 C DIN 40040 "F" max. 1000 m amsl at nominal load to VDE 0160 table 6 tted unit designed to VDE 0160 5.5.1.3 2 to VDE 0106 part 100 UIII to VDE 0110 part 1 VDE 0160 5.6 VDE 0875 part 3 VDE 0558 part 1 UL le E 135074 vertical top-hat rail, standard 35 mm (optional) 70 x 165 x 135 85 x 165 x 170 from below 70 x 165 x 135 85 x 165 x 170 70 x 165 x 135 85 x 165 x 170 DC: "Off": 0 1.5 V "On": 3.5 30 V undercurrent yes via LED, transistor (open collector) DC: "Off": 0 1 V "On": 3.5 35 V AC: "Off": 0 5 V "On": 15 110 V
Load-circuit monitoring Thyro-S monitoring Fault signal Frequency Applicable for Switch processes Operating-temperature range Storage-temperature range Humidity class Installation height Test voltage Conditions of use Contamination category Overvoltage category Safe isolation Location of use Design UL approval Installation Fitting Size w x h x d (mm) 30 A ; 40 A ; 45 A 60 A ; 100 A Connections
AEG Stromversorgungs-Systeme GmbH
Emil-Siepmann-Strae 32 D -59581 Warstein - Belecke Phone 0 29 02/763 -509 Telefax 0 29 02/763 -12 01 http ://www.aegsvs.de
884/0497 EN Printed in Germany Right to modication reserved VHMA Wiesbaden
