Emax Specs
Emax Specs
com
DESCRIPTION
The EMAX On-Line motor test equipment offers the most versatile approach to troubleshooting and trending energized electric motors on the market today. It is equipped with a fully functional laptop computer and loaded with G lll d Go o d MCEG o d, the golden standard in motor management software. G lll d Go o d With MCEG o d the entire test history of your electric motor is at your fingertips and equipped with the latest in acceptance criteria from IEEE and NEMA. Red or Yellow color-coded alarms identify any test data that is outside the acceptance criteria immediately following the test. The case is made of ultra high impact ABS material for ruggedness. It is easy to carry and no AC power is required, making tough to reach motors or starters easier to test. Data Includes: Current Spectral Analysis High Frequency Eccentricity Analysis In-Rush/Start-Up Phase-to-phase Voltage RMS Line-to-Neutral Voltage RMS Voltage Imbalance Crest Factor Total Harmonic Distortion (THD) % Full Load Amps Average Current RMS Phase Current RMS Phase Impedance Impedance Imbalance Power (KW, KVA, KVAR) Power Factor Efficiency Output Power Torque More
12/4/2006 Rev A
www.pdma.com
DESCRIPTION
Voltage input range: AC 100-240 V, 50/60 Hz (computer) Voltage measurement: 0-600 VAC Direct line 1% (10 to 100% of range) Secondary line 1% + PT error (10 to 100% of range) Current measurement: 0.5% of input (plus the accuracy of the probes) Standard current probes: PdMA 2128.14 1%(of reading) 0.1mV from 1 to 12A @100mV/A 1%(of reading) 2mV from 10 to 80A @10mV/A 2.5%(of reading) 2mV from 100 to 150A @10mV/A Power measurement: THD/HVF/ Spectrum 50th harmonic Current spectrum analysis: 8000 lines resolution Dimension: 18.5 x 14.5 x 6 in. 46.99 x 36.83 x 15.24 cm. Weight: 19 23 lbs. 8.62 10.43 kg. Lead set: Four 8 ft. (2.44 m.) fused voltage leads for 3 phases and ground. Voltage probe accessory kit Three 15 ft. (4.57 m.) AC/DC current probes for three phases Environmental Operating temperature: 41F to 95F 5C to 35C Storage temperature: -4F to 104F -20C to 40C Humidity: 20% - 80% non-condensing
ATTENTION
12/4/2006 Rev A