Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Reducing Agents Used in Titrations Involving Iodine

    Uploaded by

    tiago_matao
    Sodium thiosulfate is commonly used as a reducing agent in titrations involving iodine. The reaction between iodine and thiosulfate can be represented by the equation I2 + 2 S2O32- = 2 I- + S4O62-. Sodium thiosulfate cannot be used as a primary standard due to variable water content. Potassium dichromate can also be used in acidic solution with excess iodide to liberate iodine and titrate the thiosulfate. Calculations in iodine titrations require relating all species to each other through stoichiometric relationships.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Reducing Agents Used in Titrations Involving Iodine

    Uploaded by

    tiago_matao
    39 views2 pages
    Sodium thiosulfate is commonly used as a reducing agent in titrations involving iodine. The reaction between iodine and thiosulfate can be represented by the equation I2 + 2 S2O32- = 2 I- + S4O62-. Sodium thiosulfate cannot be used as a primary standard due to variable water content. Potassium dichromate can also be used in acidic solution with excess iodide to liberate iodine and titrate the thiosulfate. Calculations in iodine titrations require relating all species to each other through stoichiometric relationships.

    Original Title

    texto_determinação_crvi

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sodium thiosulfate is commonly used as a reducing agent in titrations involving iodine. The reaction between iodine and thiosulfate can be represented by the equation I2 + 2 S2O32- = 2 I- + S4O62-. Sodium thiosulfate cannot be used as a primary standard due to variable water content. Potassium dichromate can also be used in acidic solution with excess iodide to liberate iodine and titrate the thiosulfate. Calculations in iodine titrations require relating all species to each other through stoichiometric relationships.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    39 views2 pages

    Reducing Agents Used in Titrations Involving Iodine

    Uploaded by

    tiago_matao
    Sodium thiosulfate is commonly used as a reducing agent in titrations involving iodine. The reaction between iodine and thiosulfate can be represented by the equation I2 + 2 S2O32- = 2 I- + S4O62-. Sodium thiosulfate cannot be used as a primary standard due to variable water content. Potassium dichromate can also be used in acidic solution with excess iodide to liberate iodine and titrate the thiosulfate. Calculations in iodine titrations require relating all species to each other through stoichiometric relationships.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Reducing Agents Used in Titrations Involving Iodine Sodium thiosulfate is the most widely used reducing agent and

    is historically associated with titrations involving iodine. The reaction between iodine and thiosulfate can be represented by the equation, I2 + 2 S2O32- = 2 I- + S4O62This is the easier way to describe the reaction but what actully takes place is the following equilibrium, I3- + 2 S2O32- = 3 I- + iodide. Sodium thiosulfate can not be used as a primary standard due to the ambiguity of its content of water of hydration. In case of iodate, IO3- + 5 I- + 6 H+ = 3 I2 + 3 H2O It is obvoius from this equation that the reaction should be conducted in acidic solution and in presence of excess iodide. However, great care should be observed in weighing the iodate in order to obtain good results. Another mothod for thiosulfate standardiztion uses potassium dichromate, also in acidic solution, and in presence of excess iodide according to the equation: Cr2O72- + 6 I- + 14 H+ = 2 Cr3+ + 3 I2 + 7 H2O Again, the liberated iodine oxidizes the thiosulfate. The reaction takes place in acidic solution and in presence of excess I-. If thiosulfate solutions are to be stored for prolonged periods, it should be emphasized that carbon dioxide present in water will result in the decomposition of thiosulfate giving elemental sulfur as the result. This behavior can also be observed when some bacteria is present in solution, S2O32- + H+ = HSO3- + S The elemental sulfur can easily be observed as the solution turns yellowish. Therefore, solutions of thiosulfate should be prepared from recently boiled and recooled distilled water with the addition of 3-5 drops of chloroform or about 10 mg /L of HgCl2 which improves the storage capacity of thiosulfate. It is also a good practice to store thiosulfate solutions in dark brown bottles with the addition of about 0.1 g/L of sodium carbonate to decrease the bacterial activity. S4O62-

    since I2 is present as the triiodide in aqueous solutions containing

    Indicators Involved in Iodine Methods The most widely accepted indicator in iodine titrations is starch. Starch forms a complex with iodine leading to a deep blue color. This complex is insoluble in water, which necessitates the addition of starch just before the end point which can be determined when the yellow color of iodine fades significantly. Ethanol and strong acid conditions should be avoided when starch is used as indicator. This is because ethanol diminishes the color of the complex while strong acidic solutions will hydrolyze the starch. It is advised that the starch should be freshly prepared for sensitive appearance of the blue color. A starch derivative, sodium starch glycollate, is soluble in hot water and can be prepared in 1% solutions by gradually adding 1g of the starch glycollate to 100 mL of water and boiling for few minutes. About 0.1 - 0.2 mL of this solution is sufficient as an indicator. Calculations Involved in Iodine Methods It is very important to relate all species to each other by correct stoichiometric relationships for successful calculations. For example; Calculate the molarity of thiosulfate solution if 0.200 g of KIO3 required 50.0 mL of the thiosulfate solution. Provided that excess KI and HCl were added. IO3- = 3 I2 I2 IO3- + 5 I- + 6 H+ = 3 I2 + 3 H2O = 2 S2O32- I2 + 2 S2O32- = 2 I- + S4O62IO3- = 6 S2O32mol KIO3 ___________ X 214 g KIO 3

    mol S2O32? _________ = 0.200 g KIO 3 X L 6 mol S2O32__________ mol KIO3

    1 1000 mL X ______________ X _______ = 0.112 M 50.0 mL S2O32L

    Therefore, always find the relationships involved and follow each till you obtain a direct relation between titrant and the material being titrated. Then, straightforward calculations are performed.

    You might also like