Scribd Logo
Upload

Welcome to Scribd!

  • 349 views

    08 Welltest Equipment

    Uploaded by

    dronne
    The document provides details on typical equipment used for well testing operations. It includes diagrams and descriptions of a burner manifold, gauge/surge tank, choke manifold, eruption manifold, unitized well control head, and data header. The objectives of well testing operations are also listed, which are to obtain production rates, fluid properties, pressures, temperatures, and samples for analysis.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    08 Welltest Equipment

    Uploaded by

    dronne
    349 views4 pages
    The document provides details on typical equipment used for well testing operations. It includes diagrams and descriptions of a burner manifold, gauge/surge tank, choke manifold, eruption manifold, unitized well control head, and data header. The objectives of well testing operations are also listed, which are to obtain production rates, fluid properties, pressures, temperatures, and samples for analysis.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on typical equipment used for well testing operations. It includes diagrams and descriptions of a burner manifold, gauge/surge tank, choke manifold, eruption manifold, unitized well control head, and data header. The objectives of well testing operations are also listed, which are to obtain production rates, fluid properties, pressures, temperatures, and samples for analysis.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    349 views4 pages

    08 Welltest Equipment

    Uploaded by

    dronne
    The document provides details on typical equipment used for well testing operations. It includes diagrams and descriptions of a burner manifold, gauge/surge tank, choke manifold, eruption manifold, unitized well control head, and data header. The objectives of well testing operations are also listed, which are to obtain production rates, fluid properties, pressures, temperatures, and samples for analysis.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    PARVEEN

    Well Test Equipment

    LAYOUT FOR TESTING GAS CONDENSATE OR OIL WELLS

    Burner
    Manifold
    Air
    Burner Gas
    Manifold Water to
    Air Smoke
    Oil Suppressor
    Water to Gas
    Smoke
    Suppressor
    Water Burner

    Separator
    Burner Oil SSV Actuator Pressure Water to
    Heat Shield

    Water to Surface Safety Valves


    Heat Shield Flowline
    Manifold*
    Water
    Header
    Pump

    Surface
    Choke Manifold Test Tree
    Manifold

    Tuning
    Head
    Swivel

    OBJECTIVES OF WELL TEST OPERATIONS

    Following important data & samples to be obtained from well test :

    ! Gas production rate in MMSCF/D.


    ! Oil or Condensate production rate in barrels per day.
    ! B&W percentage of crude.
    ! Gravities of oil , gas & water
    ! Salinity of water with further compositional analysis if possible.
    ! Viscosity of condensate or crude.
    ! Pourpoint of condensate or crude, determined from fresh wellhead samples.
    ! Rough wellhead composition of produced gas, including H2S,CO2, CO&N2 content.
    ! Bottom hole pressures, build-ups and draw-downs.
    ! Bottom hole temperature.
    ! Accurate recording of surface pressures, temperatures and flow data versus time.
    ! Separator gas samples, Oil samples , under pressure
    ! Bottom hole PVT samples.

    Above introductory figure shows typical well testing layout for a very complete set of equipment. The equipment
    requirements and design for successful well testing obviously vary according to the specific requirement of operators.
    PARVEEN
    Well Test Equipment

    MODEL ANSHOO BURNER WITH 60’/75’/90’ BOOM

    Capacity : 12000 BOPD


    Features : Designed to dispose off crude oil /diesel, pollution free Pilot ignition system for each
    burner head.
    Consist of Atomizers for multistage automization.
    Specially designed nozzle and high velocity of effluent gives flame narrow shape , resulting in
    reducing heat radiation.
    Flow rates up to 12,000 STBD at any water percentage.
    Swivel provided in structure allows a rotation in 30 º each side of boom axis.
    Total length of boom available :
    60' - 75' - 90' in 2 - 3 sections
    Booms comprises of :
    Oil line 3” SCH 80
    Gas line 4' / 5” SCH 80
    Air 2” SCH 40
    Water line 3” SCH 40
    Diesel line 1.50 “ SCH 40
    Relief Line 4” SCH 40
    Propane line ½” SCH 40
    Electric cable
    Material of construction :
    Suitable for H2S Service asper NACE MR-01-75
    PARVEEN
    Well Test Equipment

    GAUGE TANK / SURGE TANK

    Gauge Tank Surge Tank

    Capacity : 100 BBL ( Twin Compartment) Capacity : 100 BBL (Twin Compartments)

    Features : Features :
    Supplied with Centrifugal pump with electric driven Design pressure : 150 PSI / W.P. : 50 PSI
    motor (chemical proof) w/ HP Flame proof console. Magnetic level controllers with High/Low level alarm.
    Complete with piping, flanges, valves , instrumentation Complete with piping, flanges, valves, instrumentation
    & union Connections. & union connections With automatic control valve to
    control pressure in tank up to 50 psi.
    Supplied with Centrifugal pump with electric driven
    motor (chemical proof) w/ HP Flame proof console.
    PARVEEN
    Well Test Equipment

    MANIFOLDS / UNITIZED WELL CONTROL HEAD / DATA HEADER

    3.1/8” x 5000 PSI CWP - 3.1/16” X 100000 PSI CWP


    Construction :
    Skid mounted suitable for H2S Service asper NACE
    MR-01-75.
    Complete with 4-5 Gate Valves / Adjustable & Positive
    Chokes, 3” Thru bore.
    With provision for measuring pressure, temperature &
    sampling both Upstream & Downstream of chokes.

    Choke Manifold

    2.1/16 x 5000 PSI CWP - 3.1/8”X 5000 - 3.1/16” -10000


    PSI CWP
    Construction :
    Skid mounted suitable for H2S Service asper NACE
    MR-01-75.
    Complete with 8 Gate Valves / Adjustable & Positive
    Chokes, 2” / 3” Thru bore.
    Orientation of Gate Valves, Chokes asper
    customer requirement.
    With provision for measuring pressure, temperature &
    sampling both Upstream & Downstream of chokes.
    Eruption Manifold

    3.1/16” x 10000 PSI CWP


    Construction :
    Skid mounted - Unitized type.
    Suitable for H2S Service asper NACE MR - 01- 75.
    Complete with two side outlets one for connection to
    Kill line & other for production testing.

    2” /3” /4” 5000 PSI & 10000 PSI WP


    3’ to 8’ Length
    Material :
    Utilized Well Control Head
    Suitable for H2S Service asper NACE MR-01-75.
    With Union / Gray Lock End Connections.
    Supplied with multiple ports Plugged or Flanged at
    specified intervals and degrees.
    Supplied with Thermowell , Pressure Gauges as
    Data Header
    required by customer.

    You might also like