SUMMER 2013

Charity Champions
2012 Finning Cup donates over $50,000 to various organizations

A Cause For Celebration

Fort McKay facility has oil sands customers covered
www.finning.ca
A FINNING CANADA PUBLICATION PM #40020055

A DYNAMIC ADVANTAGE

Dynamic Gas Blending your dual-fuel solution for land drilling and production.
Learn more about the advantages of making the switch to Dynamic Gas Blending. Scan the tag or visit http://cc685.com/3500_dgb today.

Finning Power Systems Edmonton: 780-443-7500 Calgary: 403-275-3340 Toll Free: 1-888-finning
2012 Caterpillar. All rights reserved. CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Contents

Summer 13

22
Columns & Departments 4 Finning Focus
Safe and sound

30
14 18
Open for Business
The grand celebration of the state-of-the-art Fort McKay facility heralds Finnings newest branch

5 6 9 11 12 13 20 21 29 32 On the Cover 33 34

Letter to the Editor Groundbreaker

Med School for Miners; Women Building Futures; Finning Cup results

By the Numbers Yesterday & Today

The evolution of the 988 series

The Road Forward

Experts give insight into western Canadas road building industry

Operators Tips
Maintenance makes a difference

Managers Tips
An expansion to a new branch presents many challenges

21

22 26 30

An Inside Job
Fluid analysis lab offers top-notch preventive maintenance

Service Spotlight
New computer system speeds up the support teams solutions

Excavation Excellence
Mid-City Excavating has been a leading business in the Edmonton area for three decades

Safety First
Inspect your gadgets

Antarctic Update
Hear from Spencer Smirl about his adventures on The Coldest Journey

Tech Spotlight
Instantaneous information

Portrait
Meet Pat Magnus

Bills Business
Location application

26
www.finning.ca

Mid-City Excavating has used Finning's service since its inception 30 years ago.

Count on Us

Summer 2013

Keep Safety's Drumbeat Alive This Summer

by hilary anaka, finning editor

The "S" word is heard often at Finning, but there is a good reason for that

Truth be told, when I first joined Finning in 2010 I didnt really get all the fuss about safety. As far as I could tell I was in a low-risk situation. I worked in an office, had common sense and grew up on a farm surrounded by large equipment. Surely that would be enough to see me through. Three years later, I get it. Ive seen the light and Im an advocate. Not a day goes by at Finning without a conversation about safety. Sometimes its a safety share at the start of a meeting, Not a day goes by other times its writing at Finning without a an article or reporting a conversation about safety. near-miss, but most often its about something that happened on the weekend or after work hours. Whether its avoiding wildlife on the drive home or slipping on the deck over the weekend, with each story told my risk tolerance drops and my desire to spread the word increases. I grew up on a family farm northeast of Edmonton with my parents and older brother. For most of my youth, our operation consisted of grain farming and raising cattle. At the height of harvest, racing against Mother Nature to get the crops off, we operated on very little sleep and under a lot of stress, sharing dusty gravel roads and undivided highways with hundreds of others in the same situation. My family is far from reckless but, looking back, our safety practices were a bit lax. Thanks to heightened safety awareness in western Canada, improved technology and the lessons I learn at work, my family is more vigilant each year. Still, the stark reality remains, according to Alberta's Occupational Health and Safety, every year there are employees who dont make it home from work. In 2011 there were four workplace fatalities in the Yukon, 18 in the Northwest Territories and

Nunavut, 123 in Alberta and 190 in British Columbia. The numbers paint a distressing picture, but the true tragedy is in the hearts of the loved ones left behind. In early April, a serious injury took the life of Francisco Palominos, a 29-year-old employee at Finnings truck shop near Santiago, Chile. Though wed never met him or worked alongside him, we mourn his passing here in Canada. Were thinking of his family, friends and co-workers and are doubly committed to safety at work and at home. So, in honour of Francisco, and every other employee who never made it home; enjoy your summer safely.

tracks & treads

Summer 2013

www.finning.ca

SUMMER 2013 Volume 54, No. 2

Publisher Ruth Kelly [email protected] FINNING editor Hilary Anaka [email protected] Associate Publisher Joyce Byrne [email protected] Director of custom content Mifi Purvis [email protected] Editor Jordan Wilkins [email protected] Editorial Advisors Jeff Howard, Michelle Loewen art director Charles Burke [email protected] Associate ART DIRECTOR Andrea deBoer ASSistant ART DIRECTOR Colin Spence Production coordinator Betty-Lou Smith Production technicianS Brent Felzien, Brandon Hoover circulation coordinator Karen Crane [email protected] Advertising representative Anita McGillis [email protected] Contributing Writers Stacey Carefoot, Caitlin Crawshaw, David DiCenzo, Keith Haddock, John Hardy, Sandy Joe Karpetz, Trica Radison, Scott Rollans, Robin Schroffel Contributing PHOTOGRAPHERS and illustrators Buffy Goodman, Greg Halinda, Heff O'Reilly, Kelly Redinger, Rick Tolhurst, Eugene Uhuad, Chip Zdarski Tracks & Treads is published to provide its readers with relevant business, technology, product and service information in a livelyand engaging manner. Tracks & Treads is published for Finning Canada by Venture Publishing Inc. 10259-105 Street Edmonton, Alberta T5J 1E3 Phone: 780-990-0839 Fax: 780-425-4921

Dear Tracks & Treads: Many years ago I was fired because of a Caterpiller machine. I was working on a service rig southeast of Edmonton just outside of Brashaw. I was there the day President John F. Kennedy was shot. I was on the graveyard shift and I didnt get much sleep before coming to work, probably because I was glued to the assassination reports all over television and radio. It was freezing outside but we had this one really toasty shack to keep us warm. No, it wasnt the boiler. The shack had a wonderful and trusty D311 Cat generator in it. I loved the sound of it chugging away at 1200 rpms. It was very warm and inviting to all of us on the rig. At the time, we were drilling out a cement plug, so there wasnt much to do. I decided to go inside that warm shack and sit on a pail right next to the D311. I rested my head against the engine and the vibration lulled me off to sleep. When I awoke and ventured outside, everyone was wondering where I went. The crew figured Id quit and walked right off the jobsite. I guess I may as well have because they ran me off just the same. If it hadnt been for that D311, I probably would have kept the job (mind you Id have been half-frozen the whole time). Sincerely, Forbes Campbell

Dear Tracks & Treads: This photo was taken in 1954 at Fords Cove on the Portland canal. This was our very first Cat 8R-D8. Blood, mud and payments of $10 per hour plus fuel was the game back then but things got better. We carried on for another 50 years. Finning has always been a fine company. Just thought Id share this; I always look forward to the next issue of Tracks & Treads. Tex Fosbery President Fosbery Bros. Enterprises

Tell us what you think

Tracks & Treads would love to hear from you. Tell us what you think of the magazines stories, columns and look, so that we can improve it and make it a more interesting read.
Send your comments to editor-in-chief Hilary Anaka by email at [email protected] or the old-fashioned way to: Hilary Anaka, Tracks & Treads, Finning Canada, 16830 107 Avenue, Edmonton, Alberta T5P 4C3

Contents 2013 by Finning Canada. No part of this publication should be reproduced without written permission. PM #40020055

www.finning.ca
Summer 2013

www.finning.ca

By David DiCenzo

Devastated by Fire

Charities Are the Real Winners of the Finning Cup

Non-profit organizations throughout western Canada benefited from Finnings latest internal sales competition. The 2012 Finning Cup, which divided the company into four teams based on geographical regions, saw employees rally together to earn prize money to donate to charities of their choice. Although there is an actual two-foot tall trophy that the winners receive, the real prize of the Finning Cup is the ability to give back to the community. In total, Finning donated, on behalf of its employees, $55,000 to various organizations throughout their territory. The winning team, Southern B.C., earned $35,000 of that total and split the money between six different organizations. The Ishtar Transition Housing Society, Vernon Jubilee Hospital, East Kootenay Foundation for Health, Queen Alexandra Foundation for Children, Boys and Girls Clubs of Williams Lake District and New Life Mission each received donations of $5,833 from Finning. Other organizations that received donations were United Way Fort McMurray, Stanton Territorial Hospital Foundation, Stollery Children's Hospital Foundation, Canucks Autism Network, Childrens Health Foundation of Vancouver Island and BC Childrens Hospital Foundation. Jim Harrison, the team captain of Southern B.C., says the entire team worked together to win the championship and that the introduction of the charity aspect this year further galvanized his teams efforts. Its quite exciting for the guys to have won this, he says. I am so proud of the commitment people put in to this program.

JUBILANT MOMENT: Customer service manager Trevor Miyazaki (left) and Vernon branch manager Lee Callow (right) were all smiles when presenting to the Vernon Jubilee Hospital Foundation.

SUITE EMOTION: Finnings Kyle Wright (left) and Brendan Carter (right) present a cheque to Rebecca Alty of the Stanton Territorial Hospital Foundation in Yellowknife. These funds will go to the construction of the hospitals new treatment suite.

STRONG FOUNDATION : Finnings GM of the Peace Region, Mark Balaski, gives Lori Finck of the Stollery Childrens Hospital Foundation the hospitals portion of the Finning Cup prize.

WHERE THE HEART IS: Finning employees Dan Warrington, Tant Boothman, Tarla Power and Kevin Brunsch contribute their cheque to Ishtar Transition Housing Society representatives Karen Boehm and Nancy Drewery.

tracks & treads

Summer 2013

www.finning.ca

Building Futures and Breaking Barriers

Oil Sands Ready: Women Building Futures students celebrate the completion of the 12-week operator training program. The Kearl Lake Oil Sands Project, located 70 kilometres north of Fort McMurray, will have a new look in the near future, or at the very least a changing demographic. Sixteen women will fill heavy equipment operator positions later this summer thanks to an innovative 12-week course from the Edmonton-based training centre, Women Building Futures. Thousands of women showed interest in WBFs Imperial Oil Limited Heavy Equipment Operator Program last December and, of the 170 who completed the application process, 16 were selected to train for their opportunity to compete with the boys in the oil sands. We targeted a very specific woman, says WBF marketing and communications manager Heather Markham, A more mature worker; someone who has the ability to live in camp and has experience with machinery. We targeted women coming out of the military as well as women in the farming industry. Regardless of background, one common thread among the programs students was the joy and excitement they experienced when they first got to fire up the machines. After completing the Test of Workplace Essential Skills, the students participated in ride-alongs on a variety of loaders, dozers, graders and excavators donated by Finning Canada and Emeco. When we talked with the women about what appealed most to them, they consistently said it was the chance to play on these amazing machines, says Janelle Morin, WBFs director of student recruitment and programs. Their eyes would light up when they got a chance. WBF hopes that the first class from the Imperial Oil Limited Heavy Equipment Operator Program is just the beginning. Morin says that the impeccable reputations of the industry participants attracted potential operators of a high caliber. And, ultimately, the program and its success could mean a shift in an industry where men have traditionally dominated. These 16 women are quality people, Morin says, Theres no doubt that they will have a significant impact on this industry in the future.

Remember to check in for the latest from Finning family member Spencer Smirl and the rest of The Coldest Journey at facebook.com/ TheColdestJourney. The Coldest Journey team hopes to become the first expedition to ever cross Antarctica during its winter season. The adventure is in the name of both science and philanthropy as funds raised go to the Seeing is Believing charity. For more information on the expedition, visit thecoldestjourney.org.

www.finning.ca

Summer 2013

Lights, actionmechanic
When Doug Fenton was in high school and unsure about his career path, a successful work-experience program ultimately led him to where he is today. Two decades later, the tables have turned and Fenton is the one educating others about his occupation, although thanks to technology, his audience is more than just one student. Fenton is a field mechanic based out of Finnings Squamish branch and was recently featured on Career Trek B.C. representing heavy duty mechanics. Career Trek B.C. is a government-run program that creates webisodes designed to teach students, or those looking to make a career change, on a variety of jobs available in the province. In the heavy duty equipment mechanic episode, Fenton gave insight into the skills and training required to be successful in the trade as well as a basic rundown of what the job entails. With 19 years of experience in the industry, and more than a decade at Finning, Fenton is a seasoned veteran when working with heavy equipment, but when it comes to speaking on camera, Fenton admits he is a rookie. The whole thing was pretty new to me, Fenton recalls. We had to redo a few shots a dozen times but I think it turned out pretty good. Its great to be able to inform people who are interested in the job. Fenton enjoys working with customers and solving any problems that their machines might have. Travel is obviously necessary for a field mechanic, but where some may be deterred by that aspect, Fenton believes it is one of the positions perks. I like going out to all the different sites and situations, he says. Sometimes it can be ugly if the rain and snow are really coming down, but Ive also been in some pretty amazing places when the sun was shining. To watch Career Trek B.C.s heavy duty mechanic profile featuring Doug Fenton, visit www.careertrekbc.ca/episode/heavy-duty-equipment-mechanic.

Med School for Miners

Over the past 20 years, the British Columbia mining community has raised over $25 million for the BC Childrens Hospital Foundation through the Mining for Miracles program. Each year Finning plays a vital role in this program. In addition to donating funds, Finning presents one of the initiatives most important events an annual kick-off where 60 to 70 executives from the provinces mining community get together at the hospital and see firsthand the importance of their contributions. This years event, Med School for Miners, had guests don scrubs and participate in interactive tours. Its a really cool night, says Gordon Finlay, vice president of coal and metals with Finning. It kind of connects the dots between the money that we raise and donate, and where it all goes. Guests receive a behind-in-the-scenes tour of the facility led by medical professionals and learn about the various equipment and procedures that their donations support. Finning has sponsored the event for the last eight years and to Finlay, the night is an amazing opportunity for the BC Childrens Hospital to give insight into their life-saving work. It gives the hospital a chance to showcase the incredible work they do, he explains. Hospital staff take us directly into an operating room or they demonstrate an emergency transport service; it really helps the mining community see all the people involved. Mining For Miracles showcases the mining industry coming together to support an obviously important cause, Finlay says. Each year the organization establishes a goal and then exceeds it. On Finnings end, Finlay says that the work of external relations team lead Hilary Anaka and manager of business development Mark Vander Griend is vital to the companys Mining for Miracles contribution, specifically the Med School for Miners event. Teri Nicholas, president and CEO of the BC Childrens Hospital Foundation,


appreciates Finnings supporting role. Through Mining for Miracles, the mining community has touched the lives of tens of thousands of children who have required the services of BC Childrens Hospital, says Nicholas. Finning Canadas sponsorship of our kick-off event for the past eight years has helped us recognize and thank Finnings peers in the mining industry, ensuring they remain committed to supporting our hospital and, ultimately, helping BCs kids enjoy healthy lives.

tracks & treads

Summer 2013

www.finning.ca

By the Numbers
The number of troll dolls that Sophie Marie Cross owns, more than anyone else in the world

633
34.5
The weight, in pounds, of hockeys Holy Grail

Troll dolls were originally created by Danish fisherman and woodcutter Thomas Dam. Dam couldnt afford a Christmas gift for his young daughter so he carved the doll from his imagination

1959

The current number of names engraved on the cup in total. As new names are added, older rings are removed and stored at the Hockey Hall of Fame

2,267
Height, in metres, of the Calgary Tower

191
The year Calgary Tower first opened to the public

The seed of the 2012 Stanley Cup Champion LA Kings at the beginning of the playoffs.

32.25 10,900 8 1 60 1968

Height, in inches, of the Stanley Cup Weight of the structure, in tons The number of times that an eighth seed has ever won the Stanley Cup Percentage of the tower's weight that is below ground

www.finning.ca

Summer 2013

THREE UNBEATABLE OFFERS ON YOUR FAVOURITE CAT MACHINES

% 60 MONTHS

ON CAT COMPACT EQUIPMENT*

% 48 MONTHS

ON CAT HYDRAULIC EXCAVATORS, MEDIUM WHEEL LOADERS, MOTOR GRADERS AND CAT D6(N/T)

% 60 MONTHS

ON CAT D6K & D6K2 TRACK-TYPE TRACTORS.

Call your local Finning representative today for details

* O% for 60 months financing (or cash rebate in lieu of financing) available on Compact Wheel Loaders, Skid Steer Loaders, Multi Terrain Loaders, Compact Track Loaders, Mini Hydraulic Excavators (308 and down), Small Wheel Loaders (924-938), Small Track Type Tractors (D3-D5) and Backhoe Loaders delivered from June 1, 2013 to September 30th, 2013. Machines must be invoiced by September 30, 2013 to qualify for this program. O% for 48 months financing available on Cat Wheel Hydraulic Excavators (M313D, M315D, M316D, M318D, M322D, M318D MH, & M322D MH), Small Hydraulic Excavators (312, 314, 316 & 318), Medium Hydraulic Excavator (320, 324, & 329), Large Hydraulic Excavators (336E 336E LH), Medium Wheel Loaders (950K, 962K, & 966K) and Medium Track Type Tractors (D6N & D6T) delivered from June 1, 2013 to September 30th, 2013. Machines must be invoiced by September 30, 2013 to qualify for this program. 0% for 48 months financing available on Cat M-Series Motor Graders (12M2, 12M2 AWD, 140M2, 140M AWD, 140 M2 AWD, 160M 160M2, 160M AWD, 160M2 AWD, 14M). Machines must be delivered to customer by December 31, 2013. O% for 60 months financing available on Cat Medium Track Type Tractors (D6K & D6K2) delivered from June 1, 2013 to September 30th, 2013. Machines must be invoiced by September 30, 2013 to qualify for this program.

by keith haddock

Game Changer
50 years ago Caterpillar launched its 988 wheel loader and shifted the entire industry
With the successful launch of its first wheel loader in 1959, the 944A, Caterpillar set its eye on increasing its market share of other earthmoving machines outside its core products of crawler tractors, motor graders, crawler loaders and scrapers. This marked the beginning of a rapid diversification by Caterpillar. The product line shifted from conservative earthmoving equipment in the 1950s to an expanded lineup of new products that would be established by the mid-1960s. Two more wheel loaders, the 0.93-metre 922A and the 2.1-metre 966A debuted in 1960, establishing Caterpillar as a strong force in the loader market. The momentum continued in May of 1963. This is when the first ever Caterpillar 988 wheel loader rolled off the Building LL assembly Product line pioneer: Still looking modern in appearance, the line in Peoria, Illinois 988 wheel loader was Caterpillars first articulated loader and was and changed the also its largest when announced in 1963. companys product line forever. It was the fourth model in Caterpillars line of wheel loaders and by far the companys largest to date. But it had another distinction too. Caterpillars previous loader models were rigid-frame with hydraulically-boosted rear wheel steering. The 988 was the companys first model with articulated frame steering. This would Loader longevity: The current 988H wheel loader continues soon become the this models 50-year legacy of continuous innovation and standard on most of the technological advancement. worlds wheel loaders and Caterpillar quickly became one of the industrys pioneers by exploring the advantages of this style of steering. And the advantages were huge. The 3.8-cubic metre 988 loader was powered by a six-cylinder turbocharged Caterpillar D343 diesel engine, initially rated at 300 flywheel horsepower that would increase to 325 flywheel horsepower in 1968. The standard rock bucket also grew to 4.6 cubic metres. A powershift transmission gave the machine three forward speeds and reverse through a torque converter to planetary reductions in all four wheels. The machines shipping weight originally weighed-in at 25.6 tonnes. A major safety feature on every Caterpillar wheel loader was the front-mounted bucket arm pivot. This allowed an unobstructed operators compartment and eliminated the safety hazard found on some earlier competitive models where the arms pivoted behind the operator. When the position was located behind, the arms passed dangerously close to the operator when the bucket was raised and it also seriously impaired visibility. Since the introduction of the 988 loader, Caterpillar continually upgraded the model using customer input and the latest technology. The first upgrade was in 1976 with the 988B. The 988B had its bucket uprated to 5.4 cubic metres, a Caterpillar D3408 engine, and a Z-bar bucket linkage. The 988F came in 1993 and then the F-series II in 1995, which increased horsepower to 400 and 475 respectively. In 2001, Caterpillars single fabricated box boom was applied to the 6.2-cubic metre 988G. Launched in 2005, the 988H carried a Caterpillar C18 engine with ACERT technology, compliant with U.S. EPA Tier 3 emission regulation. Caterpillars legacy lives on with the current 988H and its 501 horsepower engine. Another upgrade to the series line is on the horizon with the soon-to-be released 988K. This model is expected to boast even more advanced operator features, a higher fuel efficiency, and an increased overall performance. Its important to remember, though, that the longevity of this loader line dates back to 1963 with the success of the original 988.

www.finning.ca

Summer 2013

11

Tips

operators

Preventive Maintenance
Keep your grader running smoothly in all seasons
By John Hardy

Now that your machines snow wings, front plows and tire chains are stored in the shed, its the season to make sure that your grader is in prime working condition. Proper maintenance and attention are the best ways to ensure your grader remains reliable. Too often we dont pay enough attention to the finer points of a grader, warns Finning Canadas application specialist, Brad Nunn. The DCM (drawbar circle moldboard) can take a pretty good pounding during winter. High vibration from ice blading, corrosion from the various products on winter road surfaces and the stress of cold weather are all things that take a toll on overall DCM life. When it comes to maintenance, heavy equipment experts are unanimous. Operators should remember that, despite its large size, a grader is a precision machine. Like other precision equipment, peak performance occurs when all parts are properly and regularly inspected and maintained. Because of the size and complexity of most graders, there are many parts of the machine that need special attention. Historically, the circle on a grader is an example of a frequently overlooked inspection and maintenance item, but according to Nunn that is starting to change. Since the introduction of the M-series grader line by Caterpillar, some other adjustments are much easier, Nunn says. Shimming the circle is now possible thanks to accessibility from the top of the machine; the shim plate is removed and new shims are put in until the plate is flush with the top of the circle. Nunn also emphasizes the Teflon wear strips on the diameter of the circle. They are designed to keep the circle rotating fluidly and also keep the tolerance between circle teeth and pinion drive teeth in check. It may seem obvious, but Nunn urges that the graders pinion drive must be lubricated regularly with Molybased grease for an extended life cycle. Also, specifications dictate that the blade lifts, the center shift and the bolster shims must also be removed so all DCM tolerances work together for the best results. These days, many graders are equipped with some type of grade control system. In order to work in the range of tolerances, any adjustments must adhere to manufacturer specifications. The difference between on12

grade and just slightly off-grade can mean significant dollars, Nunn says. Why waste money having to haul extra product to a job just because the grader wasnt adjusted properly? Operators should know about other maintenance basics. Check the type of oil before summer heats up. Winter oils designed for good viscosity in cold weather likely wont stand up in summer temperatures. Specific oil information is spelled out in the operation maintenance manual, usually located behind the operators seat. Remember tire pressures and correct the pressure for maximum performance and tire life. When tire pressures are not set properly, grader performance suffers, Nunn explains. Consider rotating tires in the spring and exchanging summer tires for winter ones, which arent ideal in muddy or high-temperature situations. Perhaps the most important items on the maintenance list are filters. Cab and air conditioning filters are vital for the machine and the operator. Dirty filters are detrimental to the HVAC systems and can choke-off air flow. Sometimes operators forget, but when the cab windows fog on one of those cool and rainy spring mornings, its a sure sign of poor air flow through clogged filters. The air conditioning system may even seize, making it uncomfortable on hot summer days. Check it! Operators are the first line of defense against downtime. Seasonal maintenance is important but so is a regular machine check before you start a shift. Here are a few items the safety and maintenance checklist says you should inspect every time you run your iron: Front wheel spindle bearings Articulation area All-wheel drive motors Air reservoir Blade and end bits Transmission Engine oil and coolant Hydraulic oil tank Engine pre-cleaner Covers and guards Air filter Fuel tank Radiator Hydraulic cylinders, tubes, hoses All hoses and belts and fittings

tracks & treads

Summer 2013

www.finning.ca

managers

Branching Out
By Caitlin Crawshaw

Navigating the launch of a new location takes organizational knowledge and people power

Taking on a managerial position is challenging at the best of times, but those assigned to the brand new branch of a company face a laundry list of logistical and leadership challenges. In 2008, engineering technologist Arne Gjerlaug joined Alberta company ISL Engineering at the companys brand-new Lethbridge branch. His first challenge: to create a team. While hed previously worked with two of the companys other new hires, he had to bring in a third staff member and ensure everyone could work together. We needed to build a cohesive team for clients, he says. They needed to know we were the real deal. Working together to get the new office running, which was Gjerlaugs second major challenge, solidified the group. Staff helped with everything from visiting prospective sites with a real estate agent to drafting the blueprint for the new office. Everyone gained a sense of belonging, he says. And, of course, new digs meant moving out of a colleagues basement, where theyd been working. After setting up shop, Gjerlaug needed to keep everyone busy and bring in projects. This meant coldcalling prospective clients. It took time to sit down with prospects in Lethbridge, tell them about the companys services, and build trust something that needed to happen before contracts emerged. If youre developing a new client, it often takes you two years to do it, explains Gjerlaug. You have to be patient. To keep staff busy in the meantime, he worked with other branches to get his people assisting with projects elsewhere. That was pretty important, keeping everyone engaged. Workload was a struggle for the first couple of years, he says. A few years on, the branch has plenty of work and a staff of 12. For Rob Duncan, clients werent the issue when he launched two new branches of New-Way Irrigation in southern Alberta, in 2009 and 2010. The company, which provides agricultural irrigation systems, had been working with farms in both Bow Island and Strathmore even though they didnt have an office in either region. But, as manager of both offices (hes also company president), Duncan needed to advertise the business expansion. If people dont know youre there, theyll
www.finning.ca

continue to deal in their old ways, he says. He advertised in local papers and held grand opening events a couple of months after launching both sites. But Duncans largest challenge was training staff before the branches opened. If you open the store and then do training on-site, its a lot harder than if you bring them into an operational site, he says. If he ever had to do it again, hed take staff to an existing branch to have people trained before moving them to their permanent location. Starting new branches of a business is about details. Credit card terminals, stationary and functional phone systems are just a few. Tending to these small things can take a lot of time. Thats why Duncan suggests managers create long lead times. The more time you can give yourself in advance of opening, the better off youll be, he says. Top 7 Takeaways: 1) Train off-site: Its easier to train new employees at an existing site, with personnel who know the ropes. 2) Pad your deadlines: Ensure youve got as much time as possible to get everything ready before opening. 3) Understand the organizational structure: Know how different divisions work together to deliver products or services for clients, and how your branch fits. 4) Create relationships internally: Connect with different divisions of the company and know your go-to people. 5) Take time to know your clients: Meet with new and existing clients to understand their service needs. 6) Develop strategies to deliver projects: If theres only two or three of you, you may not be able to deliver a project the way you did in a more established, larger location. Develop strategies to deliver on your promises. 7) Hire strategically: Small offices mean its more important to have a team that gels. Hire people wholl have good chemistry.

Summer 2013

13

Right From the Start: (From left) Finning Canada VP Brent Davis, Caterpillar senior VP Dave Bozeman, Caterpillar VP Bill Finerty, Mayor of the Regional Municipality of Wood Buffalo Melissa Blake, Finning International CEO Mike Waites and Finning Canada President Andy Fraser.

Business
By Robin Schroffel
14

Open for
Photography by GREG HALINDA

Finnings newest facility in the oil sands gives everyone a reason to celebrate

tracks & treads

Summer 2013

www.finning.ca

OPENING TIME: Fort McKay hosted luminaries and guests from a spectrum of industries at the grand celebration.

innings presence in the oil sands has always

been strong but its bigger and better than ever, now that the new state-of-the-art Fort McKay maintenance facility is open for business. Although the site has been quietly operating since late 2012, Finning made things official on March 6 with a grand opening ceremony. The massive 160,000-square-foot facility, which includes 16 service bays, each with its own five-ton crane; a regional training centre; office space and a wash bay, underlines Finnings longterm commitment to serving its oil sands customers. Its our message to the community up here that we are committed to the future and sustainable development of this area, says Fort McKay site customer service manager Chad Slee. To mark the occasion, guests from Finning Canada, Finning International Inc. and Caterpillar joined customers, political leaders, community partners, and oil sands employees for a tour of the $110-million facility. Among the VIP guests were senior executives from the major oil sands players, such as Syncrude, Shell and Suncor. Also in attendance were representatives some of the charities and community partners that Finning Canada supports, including United Way, Keyano College and the Northern Lights Health Foundation, which provides crucial support in the sprawling Regional Municipality of Wood Buffalo. It was a great day for Finning, recalls Brent Davis, vice president of oil sands with Finning. The facility is a symbol of Finnings long-term commitment to supporting the oil sands. We invested $110 million in our future, and our customers futures, to provide our service and support the Cat products in the region.
www.finning.ca

Supply and Demand: Finnings new Fort McKay service facility is already brimming with business. Were trying to keep up with demand, says customer service manager, Chad Slee.

Summer 2013

15

The Coldest Journey

NEWER, BETTER: Guests got the chance to see the latest service innovations in action.

says that the facility has provided a much needed The 250 guests got a chance to see service innovations like the lube system increase in capacity in the region removing some and in-bay monitors, and they learned about sustainable systems like rainwater of the pressure from Finning's Mildred Lake site. capture, water recycling and exhaust capture. Slee says that the rain capture Mildred Lake will focus on serving Suncor, Syncrude system, for example, catches 70 per cent of the rainwater from the facilitys roof. and smaller contractors Large holding tanks store the water for later use. Water from the wash bay is likewise collected and treated to Finning made things official with a grand in the mining division. We were bulging at the remove contaminants and hydrocarbons. It means we opening ceremony at the Fort McKay seams, Spracklin says. can reuse the water again and again, Slee says. And the facility in March. Spracklin believes waste sludge at the end of the process is nonhazardous. Finning has done a great Finning and government representatives gave job on the organizational and planning side of things speeches and messages of welcome. And, to open and close the ceremony, local at Fort McKay. He is looking forward to seeing the aboriginal drummers from the Fort MacKay First Nation performed a traditional kinks ironed out and watching the day-to-day busisong to honour the land. ness unfold over the next few years. I think this site Slee is proud to note that local customers have welcomed the Fort McKay is the greatest thing going because we can all keep facility with open arms. In fact, he says business has surged faster than anyone busy. We can expand the business, and now weve got had anticipated. Were full almost every day, he says. Were trying to keep up two options in the area instead of one, says Spracklin. with demand now, to be honest. Its been a pretty phenomenal acceptance of our We can satisfy our customers a lot better and give operations. them better service. Sixty-nine-year-old Don Spracklin, a 49-year company veteran and service And, in the end, servicing what they sell is what department planner who has worked at Finnings Mildred Lake branch since 1980, Finning is all about. has also seen a huge impact due to the opening of the new Fort McKay digs. He
16

tracks & treads

Summer 2013

www.finning.ca

The Best Part: Fort McKay parts manager Shawn Tetrault explains the building's finer points to facilities director Drew Godley.

All Smiles: Fort MacKay First Nation chief Jim Boucher and Jim Carter, a member of Finning Internationals Board of Directors, were on hand for the opening.

www.finning.ca

Summer 2013

17

Road Ahead
Road building is vital to our economy. An increase in government funding and awareness has experts optimistic

By jordan wilkins

inning branch manager Barry Harris was surprised when told that

politicians were keen to use his modest equipment showroom in Edmonton for an upcoming press conference. But on the day of the event, Barry was prepared machine displays were immaculate, Timbits were strategically placed and a carefully-guarded surprise, the rarely seen pink, Finning-branded hardhat, was ready for presentation. The preparedness of Finnings general construction team for the February 22 press gathering complemented the celebratory message delivered by Rona Ambrose, Federal Minister of Public Works, and Ric McIver, Albertas Minister of Transportation. The pair announced the completion of 12 important highway infrastructure maintenance initiatives totaling $53 million in Alberta. Also on hand was Tony de Sousa, Finnings general manager of Central and Southern Alberta. A consummate salesperson, Tony made sure to pass out business cards just in case an opportunity presented itself. Tony also serves as chair of the Alberta Roadbuilders & Heavy Construction Associations equipment and supply committee. We kind of take it for granted, but road building is indeed a major industry, de Sousa

explained. The many projects underway throughout Finnings territory keep our skilled product support teams and a lot of rugged Cat equipment busy every day. Yes, road construction projects can get us steaming behind the wheel. But we need to take comfort that todays delays mean tomorrows destinations will be a piece of cake. Ambrose agreed, detailing the positive results that the joint federal and provincial funding for priority infrastructure projects has yielded, including safer roads and improved traffic flow. By providing key infrastructure support to local communities, the Government of Canada is promoting growth, job creation and economic prosperity in Alberta and across the country, said Ambrose. Our highway infrastructure investments will connect workers with jobs, keep trade moving and help our economy remain competitive well into the future.

18

tracks & treads

Summer 2013

www.finning.ca

These 12 highways, which include the rehabilitation of Highway 3 near Medicine Hat and Highway 26 near Camrose, are vital to the local economies around the province. The maintenance also contributes to a high quality of life, said McIver. Albertans depend on our transportation network to get them home safely, to get them to work and school on time and to get products to and from the market, he said. Maintaining and renewing key transportation infrastructure supports our priorities of investing in families and communities and building Albertas economic future. Gene Syvenky, CEO of ARHCA says some of the largest infrastructure projects in the province are still on the horizon. This includes the twinning of Hwy 63 to Fort McMurray, the completion of Edmontons ring road, the Anthony Henday, and the overpass of the QE2 on 42 Ave. in Edmonton. These initiatives will keep the industry busy, but there are still some bumps in the road ahead, says Syvenky. The challenge is, and always has been, predictable funding. The Building Canada Plan, a strategic partnership between the federal and provincial governments, is a Surface Service: Tony de Sousa, Finning's general manager of Central and program that has helped with this challenge. In Alberta Southern Alberta, joined Hon. Rona Ambrose, Minister of Public Works and this has meant $175 million federal dollars between 2007 Government Services and Minister for the Status of Women, and Hon. Ric McIver, and 2014 for core priorities including building safer roads Minister of Transportation for Alberta, during a press conference at the Finning and highways. During that same time, Alberta committed Compact Construction branch in Edmonton on February 22. $144 million, while other partners, such as municipalities, contribute $113 million. The Building Canada Plan projects ahead of us for the next couple years that we should remain fairly steady, provided $33 billion in stable and predictable funding to Davidson explains. B.C. survived the economic downturn very well and the governprovinces, territories and municipalities, allowing them ment has been able to support a fairly high level of infrastructure in both new constructo plan for the longer-term and address their ongoing tion and rehabilitation. infrastructure needs. The new Building Canada Plan, anAlberta infrastructure is also bearing the weight of a growing population. There are nounced earlier this year, will provide another $14 billion about 90,000 new Albertans every year. Syvenky believes its impossible to ignore the over the next 10 years. necessity of properly maintained roadways even if historically hes seen what he calls Further west, Jack Davidson, president of the an ignore-it-until-it-breaks attitude in regards to maintenance. B.C. Road Builders & Heavy The biggest thing is that governments are starting to recognize Construction Association says the Alberta infrastructure is also the need for consistent maintenance, says Syvenky. They are British Columbia government has bearing the weight of a recognizing they havent spent enough time and money to ensure supported construction and rehaadequate infrastructure maintenance. I think everyone is now rebilitation of infrastructure. In pargrowing population alizing that maintenance is an annual requirement. If things arent ticular, Davidson is impressed with kept up to speed, the economy suffers. But, even with population how the government used as much growth, the road building industry faces a labour shortage, particularly project managavailable federal funding as possible to help the province ers, foreman, and heavy equipment operators. It is a problem that requires creative get through the last economic recession. Spending 50 solutions from government and industry. cents per dollar is a no-brainer in our industry. Add to that the fact that over 80 per cent of Albertans regularly use roadways in the Davidson was pleased with the results of the latest B.C. province, the road building industry will continue to become more important in the provincial election and hopes that it results in continued coming years. Currently, Alberta has around 30,000 km of road, more than any other support of current infrastructure plans. Infrastructure is province in Western Canada, Syvenky says. With the average road having a design life vital to keep our industry competitive and to move our of around 20 years, he believes the province should be rehabilitating around 1,400 km people and products effectively and efficiently, he says. each year. In order to do that, around $300 million in funding would need to come, but As B.C. grows, our highways, rail and ports will become recently the average allotted funding has been less than half of that. congested and it costs our manufacturers and suppliers Syvenky says the sector that currently has the largest capacity in the road building inmore money to ship their goods. If our infrastructure dustry is paving and resurfacing. Pavement has a relatively short shelf life, he explains. doesnt receive support, our economy will die; its that Once it starts to break down, it breaks down in a hurry. simple. Still, with major projects in western Canada on the horizon and the increasing focus One of the largest infrastructure projects in B.C is the of governments at all levels on maintenance and construction, the road ahead is generCaribou Connector program which will widen the 440 ally optimistic for road builders, even if those in the industry remain cautious. And that, km portion of Highway 97 between Cache Creek and for sure, deserves a pink hardhat. Prince George to four lanes. This project is expected to stimulate trade within interior B.C. We have enough With files from Robin Schroffel.
www.finning.ca
Summer 2013

19

Spot light

service

Technically Speaking
Finning's latest communication technology speeds up solutions
By Stacey Carefoot

Finning field mechanics have added something them another extremely useful diagnosnew and powerful to their toolkit. Wherever they are, tic tool that can significantly increase they now have instant access to a massive Caterpillar their efficiency wherever they are. It database. It contains technical details on machine means we can solve our customers' probservice issues and how Caterpillar experts have resolved lems in a much more timely fashion. them over the past decade. Its known as the Caterpillar In the rare case where a mechanic Dealer Solution Network or DSN. cant find what hes looking for on DSN, While the Cat dealers back office team has had further expertise is available through access to the database for some time, Finning became Finnings 32-employee technical services the first Cat dealer in North America to introduce the team. These are experienced mechannetwork to its mechanics late last year. ics with decades of field experience who Through DSN, Cats technical experts from throughman the phones to support technicians out North America log service issues and share troublein the field. They also have a direct link shooting expertise. The database now includes informa- with Caterpillar personnel to help solve tion on service issues on a wide range of equipment, more challenging technical issues. everything from a skid steer all the way up to a dragline. But once a sticky situation is solved, the resolution isnt buried. Instead, its For example, faced with a perplexing problem with a sent to the mechanic who raised the issue, to the mechanics cross-shift counturbo on a 320D, all a Finning terpart as well as anyone who could benefit from the mechanic needs to do is fire up The plus for Cat equipment owners? information as a form of preventive education. And of their laptop and search DSN course, its recorded in DSN for future access. Since Much quicker diagnosis of to find out how this problems the introduction of DSN to mechanics in December, machine issues, less downtime been solved before. theyve added about 1,000 entries a month. and increased production. The benefits for mechanCurrently based in Edmonton, Ashley Coxworth has ics are obvious answers at been a Finning field mechanic for the last seven years. their fingertips on a multitude of equipment repair He appreciates DSN because it allows him the opportunity to share the solutions scenarios. The plus for Cat equipment owners? Much he implements in the field with Caterpillars design and engineering departments. quicker diagnosis of machine issues, less downtime In some cases, we may have a better understanding of a certain situation beand increased production. cause were the ones working with these tools every day, Coxworth says. I think Ultimately though, the growing database will prohaving it this way is better for machine improvement in the long run. duce an improved Cat product thanks to a direct conImmediate access to the DSN database means less machine downtime for nection between Finning mechanics on the frontlines Cat owners, Coxworth explains, noting that he spends less time looking for just and the folks who actually design and manufacture the right expert to get an answer to a difficult problem. And many DSN entries the equipment. include photos, making it easier to target specific parts, he adds. It allows you Finnings power systems, construction and forestry to see experiences from people all over the world. People are continually adding product manager, Jeff Szott, says the system has the more information that we can access right away instead of having to wait for potential to revolutionize Finnings service offering. someone to get back to us. Where mechanics would previously have to contact one Understandably, the DSN has been met with a warm reception in the field. of Finnings technical support advisors, they can now One of the biggest challenges facing Szott, who travelled to every branch in his take a more self-serve approach and access DSN for a jurisdiction to train field technicians on the tool, is the slight learning curve. But wealth of information pertinent to the situation at hand. Szott adds that mechanics who have been personally trained appreciate what the The idea is to not recreate the wheel each time you system offers. arrive at a down machine, Szott explains. Our techs I would say that the addition of this initiative is as important as a 9/16 are the best trained in the industry and are ready for wrench is to one of our mechanics, Szott says. Lets call it a very smart, very any challenge, but the DSNs vast knowledge base gives experienced 9/16 wrench.

20

tracks & treads

Summer 2013

www.finning.ca

By Tricia Radison

Tool Talk
Tools help us get the job done, but if theyre degraded, damaged, or modified, they can do a lot more harm than good
The head slips off a hammer in a busy workplace. A saw disc flies off at a high speed on a construction site. These events can happen in an instant and the consequences can be serious and long lasting. A principle of prevention, though, is as simple as ensuring the equipment is safe for use. But that requires a commitment to carry out the inspection every time you use the tool. Injuries due to unsafe tools are relatively rare, but they can still happen. According to Work Safe Alberta, in 2010 tools, instruments and equipment were the source of 1,857 lost-time claims, and 4,454 disabling injury claims. While not all the injuries in these statistics are related to tools that are unsafe for use, some of them are and therefore could have been prevented by simple inspections. Ive seen lots of injuries related to using unsafe tools, says Jamie Vandersteen, warehouse and tool lab supervisor with Finning. Users should inspect every tool before use for any damage or modification that jeopardizes its integrity. If the user finds anything wrong, the tool should be pulled out of service immediately. But how do you evaluate the integrity of a tool? There are three ways, according to Tom Petras, Finning health and safety director. First, your own experience with that type of tool will help indicate if something doesnt look right. If youre familiar with hammers and notice that the handle is cracked, you know you cant put a lot of force or impact on it and that its time to replace it, says Petras. The second way is to check the manufacturers instructions, which will will teach you the signs of degradation and how to spot potential hazards. Finally, theres education. Organizations can provide on-the-job training either through supervisors or in a peer setting to ensure employees know what tools look like when theyre safe to use. At Finning, there are guidelines for checking equipment that depend on the complexity of the tool.

A hand tool may require only a visual inspection where a power tool may need to be evaluated using a checklist. More complex tools may require formal hazard assessments. There are also regular maintenance intervals in place. For example, Vandersteens team controls a recall list of calibrated tools. The list is put out once a month to recall all tools requiring calibration or a safety inspection. Employees can see if a tool needs calibrating by checking the date listed on the recall sticker on the tool. Its an easy way to evaluate the safety of these tools but, once again, you have to follow through and send it in for maintenance to really ensure safety. The first step to safer tool use is awareness. Top 5 tool rules Follow the manufacturers specs and instructions. Never alter a safety device on a tool. While it might seem like they get in the way sometimes, they're there for a reason. Dont use a tool if you dont know how to use it or how to inspect it properly. Get educated if this is the case. Make sure tools fabricated in-house are engineered and stamped if they are going to bear any load or force. Dont remove or obscure the manufacturers safety instructions that are affixed to a tool.

www.finning.ca

Summer 2013

21

UNDER THE MICROSCOPE: Finning's fluid analysis lab helps prevent client's machines from breaking down by diagnosing an issue before it becomes a major problem.

22

tracks & treads

Summer 2013

www.finning.ca

An Inside JOB
By Scott Rollans Photography by Eugene Uhuad

Fluid analysis puts component performance under the microscope

Cat machine, like a human body, can sometimes pose a challenge to even the most discerning diagnostician. It might seem perfectly healthy on the outside, as it goes about its daily business, while harbouring subtle ailments deep within. Left untreated, those little problems can develop into major issues. At Finnings gleaming, state-of-the-art fluid analysis lab in Edmonton (plus a smaller lab in Surrey), company experts help prevent those issues from occurring. By regularly examining oil and coolant samples from clients machines (including non-Cat equipment), technicians and interpreters can diagnose an issue long before it ends up literally stopping a machine in its tracks. Scheduled downtime for equipment is always better than unscheduled, explains fluid analysis manager Jody Exell. This helps our customers decide when

www.finning.ca

Summer 2013

23

HUGE SUCCESS: Finnings Lisa Nahnybida, Rachel Belyan, Robin Eddy and Jennifer Yue with the donated items for the Terra Centre. to schedule their maintenance, fixing their machines before they actually break and basic constituents in the oil, says fluid analysis down. supervisor Nicole Pawlik. We also do a large-partiAron Alberda works with Finnings preventative maintenance department. cle assessment where we analyze the sample under a Alberda takes pride in his teams ability to visually assess a machine, and to perform microscope. sophisticated operating tests. But, he admits, their magic touch can only carry them To a trained eye, the large particles in a sample so far. A lot of whats going on is happening inside the major can tell a revealing story. If a components, Alberda says. We cant see inside. So, the component has severe wear, the You could easily mistake the oil analysis gives us a view into the gears, bearings, friction lab is able to identify how bad the gleaming fluid analysis lab for a wear is by the colour, shape and material, and the engine components that are all working modern medical lab. inside. size of particles. The way that the Its kind of like doing a blood test on a person, observes particles have been shaved can Richard Skura, a member of the fluid analysis support and sales team. In the lab, also indicate the type of wear. The difference between skilled technicians can tease a great deal of information from every sample. For shearing or larger chunks can go a long way in the asexample, we look for metals that are in the oil. We know that certain components sessment stage. are made of different metals. Based on these trace metals we find in the oil sample, Last year, the fluid analysis lab in Edmonton unwe can tell whether everything looks normal. If theres a spike in particular metals, it derwent a major upgrade. Today, if you glance quickly can give some indication as to what component might have a problem. at the bright, open main area, which is filled with But, metals arent the only thing that analysts are looking for in a machines sophisticated workstations and bustling technicians, liquids. We do a whole range of tests on both coolant and oil. We look at viscosyou could easily mistake it for a modern medical lab ity, soot, oxidation, nitration and particle counts. We test for water, and the acidic (only with crisp coveralls rather than hospital scrubs).
24

tracks & treads

Summer 2013

www.finning.ca

EFFICIENT FORMULA: The lab tests up to 1,200 fluid samples in a single day. It is rare that a client has to wait more than a 24 hours for results.

Long-time fluid analysis interpreter Peter Leggo remembers a time when things werent so glamorous. I actually started at R. Angus back in 1981, before Finning aquired them, he says. We had a little lab on the shop floor. The entire lab was about the same size as my office is today. In those days, many of the tests were much less sophisticated yet more time consuming, says Leggo. We were only running five or seven elements back then on the machines we used to check for metals. We basically tested for one metal at a time. And you had to reset the machine for each different element and then run all the samples through again. Todays equipment can measure 20 different elements simultaneously. With only two technicians at the time, the old R. Angus lab could process just 20 to 50 fluid samples each day. Today, with the new facility and a daily crew of 15 to 18, the pace is a bit quicker. The average is probably 700 or 800 samples a day now, Leggo says. And some days we run 1,200. As the longest serving tech in town, Leggo is a huge fan of the upgraded Edmonton digs. The new air handling system and fume hoods are a big improvement,
www.finning.ca

he says, and the physical environment is tidier as well. Everything has its place, he says. And weve been concentrating on the safety aspect. Were continually refining that aspect. In a large office adjacent to the main lab, Leggo and his two fellow interpreters examine the data from the samples. Along with a samples current readings, they look for trends based on previous samples from the same machine, and also compare the numbers with those found in typical Cat equipment. At the end of the process, the interpreters provide a written summary of their findings. We dont just give our customers back a list of results, and a bunch of numbers, says Skura. The interpreters give their feedback in just a short paragraph for the customer, so they actually have something to guide them and help them understand the results. They point out anything that looks unusual, and give possible causes. Some customers are very well versed and trained in interpreting oil analysis results, and some know very little, but we interpret every sample for everyone. And, despite the obvious comparison between the fluid lab and a medical lab, the Finning lab is seldom plagued by the long wait times that characterize the public health-care system. Exell proudly says that her team can keep up with the pace, even when faced with unusually high workloads. If a sample comes into our lab by 11 a.m., we almost always get results out during the following workday. In other words, patients who send their fluid samples to the Finning labs not only get a timely health assessment, but also a written prescription if theres anything wrong. It really is like a doctor trying to diagnose whats wrong with a patient, says Leggo.
Summer 2013

25

THE BIG DIG: Mid-City started in 1980 with one employee and a single Cat machine.

26

tracks & treads

Summer 2013

www.finning.ca

From a single employee more than 30 years ago to a team of 140 today, Mid-City Excavating has grown into an industry leader
By Sandy Joe Karpetz Photography by kelly redinger

oo much time spent in the sandbox as a child ultimately led to the inception of one of Edmontons leading excavation companies. At least, thats how Rod Stawnychy tells it. He and his wife Marian started Mid-City Excavating in 1980. Back then, Rod was the jack of all trades; a far cry from the 140 employees employed by the company today. But, thats not to say that Rod only sits behind a desk these days. If the crew is shorthanded, Rod wont hesitate to step in. His experience makes him capable of performing any task his employees need him to do. I can do it all if need be, Rod explains. From cleaning the sump to running or moving equipment; it doesnt matter. I can be everything from the janitor to the manager. You could say that the construction industry is in Rods blood. His father was a successful developer in his day so, despite the high interest rates of the 1980s when Rod was starting out, he knew he had the ability to make it in the industry. He took his chance. And it all began with the purchase of Mid-Citys first piece of Caterpillar equipment. This proved to be the beginning of a long and successful business relationship between Mid-City and Finning. In fact, the company has grown to the point where it now relies on 40 pieces of Cat equipment ranging from crawler loaders, skidsteers, dozers, track loaders, and four new 320E LRRs. Rod says that these new machines, specifically, have been a great addition to Mid-Citys fleet, especially when working in tighter spaces. The guys love them, Ive heard plenty of good things, he says. We use them a lot, particularly when doing parkade work. They work well and have close to zero radius which makes working in more confined spaces a lot easier for our operators.

www.finning.ca

Summer 2013

27

FAMILY MATTERS: The Stawnychy family (from left), Christine, Rod, Marian and Dan

As his father passed the construction culture to him, Rod says the 320E LRRs have also made his company more efficient. But his admiRod is doing the same with his children. With the reration for Cats product and Finning's service is something that Finning equipment cent addition of Rod and Marians daughter, Christine, salesperson, Len Bushell, doesnt take for granted. to the company, Mid-City is now a whole-family affair. Mid-City is a long-term customer of ours, he says. Mid-City is a good and loyal customer and they are fair. Rod holds us to task and sees the value in Finnings prod- Christine joins her parents as well as her brother Dan, who has been an employee uct support and sales. ever since he was of legal age When it comes to excavating, Mid-City can to work. With Dan, the work do it all. The company performs just about every Mid-City has relatively low turnover; ethic stayed in the family as he type imaginable, including commercial, indusMost employees have worked there too has been in just about evetrial, roadwork, demolition, site services, water, for an average of 10 years. ry position there is at Mid-City and sewer. The basis of Mid-Citys success lies and is currently the companys in its strong dedication to provide its customers longest standing employee. in the Edmonton area with the highest quality And, while the entire Stawnychy clan works at the work. These customers include some of the most prominent in the industry, such company, they are just part of the larger Mid-City famas Remington Developments, Kemway Contractors, PCL Construction and Clark ily. Rod says that without the entire staff and mangeBuilders, just to name a few. ment team Mid-City wouldn't be where it is today. He Establishing a client list like that can only come from a combination of knowlis proud that his business doesnt have to worry about edge and experience in the industry. Rod obviously has both, demonstrated by his one of the industrys largest challenges, that being a versatility and, according to Sheldon Wall, Mid-Citys safety and HR officer, that says high attrition rate. Mid-City has relatively low turnover a lot about the companys culture. Rod really is a working owner, he explains. He as most employees have worked there for an average of helps us out in the field whenever we need it and I think that a lot of our employees 10 years. I really do think a lot of that has to do with appreciate working for an owner who has that ability. us being family run, Rod explains. It creates stability But at this point in his career Rod seldom has to go out in the field. Now his days and loyalty and I think those are two very important are spent primarily looking over the equipment and any repairs, as well as purchasfactors in running a business. ing new equipment when needed.

28

tracks & treads

Summer 2013

www.finning.ca

Spot light

tech

New Solutions
Technology is having as big an impact on the jobsite as it is elsewhere in life. Smart businesses are taking advantage

By John Hardy

Finning has introduced new wireless technology that monitors the progress of equipment on a jobsite and delivers clear, concise reporting. Companies like North American Construction Group (NACG) have adopted the technology are already seeing the costand time-saving benefits, increased efficiency and an improved understanding of their projects. Wireless technology is absolutely essential to give companies that operate heavy equipment an edge, says Wes Rains, Finnings Edmonton-based technology sales and service representative. operators are more independent and even have heightened sense of pride. Matt McGaghey is a survey manager with (NACG), The learning curve for supervisors has been short. McGaghey says the online a key Finning client and premier provider of mining, interface options, Trimble Connected Community and Vision Link, are simple to heavy construction, industrial and piling services learn. The installation has won over the equipment operators too, Weve put it in in Canada. McGaghey knows as well as anyone the the hands of experienced operators who are able to see the value of the system. They importance of up-to-date technology in the mining grasp what it can do and want more of it, McGaghey says. industry and says that Finning Many other areas benefit, too. The AccuGrade Grade has been there whenever Control System is another innovative tool that makes This technology makes us more NACG was looking to expand Caterpillar machines more efficient. This technology combines efficient as a team, NACGs its current systems. digital design data, in-cab operator guidance features, and Matt McGaghey explains. Its so essential, but often automatic blade controls to enhance grading accuracy and difficult, to stay in touch with virtually eliminate the need for survey stakes. the latest technologies, says McGaghey. We rely treJust one amazing example is the hot new trend of the latest Wifi technology with mendously on Wes to keep us up to date and current. grade control and survey equipment, Rains says. Users can instantly send and NACG incorporated a remote access system about six receive information remotely to and from people working in the field. months ago. The implementation included the retrofit McGaghey admits that adapting and working with new technologies means of existing pieces of equipment that were already embracing change. From when I started in the industry 13 years ago, there has been operational in the field, a process McGaghey says was real change. Once its fully implemented is when we will see the real savings. fairly simple. Eventually most NACG equipment, new and old, will use the technology. We can monitor the progress of the equipment, Trimble Connected Community says McGaghey. With one look we can see where the Trimble Connected Community is an online service that allows construction companies to operator is on the project. manage and share information via their own unique website. The technology is ideal for The immediate access to the information repreorganization and project management. Connected Community introduces communication sents big time savings says McGaghey. NACG is and collaboration capabilities to significantly increase efficiency and productivity. able to reduce the number of trips a supervisor must Benefits of Trimble Connected Community technology: make to the field to check on the progress of a project.  Reduction or elimination of field-to-office drive time. McGaghey has found that the ability to fix many prob  Information is accessible by members anywhere and anytime. lems without leaving his desk increases the effective  Project progress and site activity is tracked in real time. ness of the company on several levels. The technology  All organization and project information is stored online in a secure manner. makes us more efficient as a team, he explains. The

www.finning.ca

Summer 2013

29

Meeting the Challenge Break the Ice

The Coldest Journey still has a long way to go but they are making ground (or ice) every day
The Coldest Journey hasnt gone exactly as planned but then again adventures this historic rarely do. At the end of February, Sir Ranulph Fiennes, the 68-year-old explorer who spearheaded the entire trek, was forced to withdraw from the expedition. Fiennes suffered from severe frostbite after having to use his bare hands in temperatures of -30C to fix a ski binding. Without their leader, Spencer Smirl and the rest of the Ice Team still hope to complete the record-breaking trek in Fiennes honour. Losing their leader might sound like the worst thing that could happen during a 2,000-mile trek, but in the Antarctic challenges are abundant. The team recently ran into a blue ice field which slowed progress considerably. And, once that was traversed, they soon encountered a stretch of hard snow verging on ice which again hampered their progress and put the team further behind schedule. Despite the challenges and the ever-dropping temperatures, the team continues on. Getting back on schedule is going to take a huge effort and will require 24-hour-a-day driving. From Spencer Smirl: When Sir Ranulph departed from our expedition two months ago, we were all sad to see our leader go. Without his valiant efforts over the last five years, bringing together people and resources from around the world, none of us would have the privilege of being here today. However, there is a silver lining in his departure. The full-time ski element is no longer part of our crossing, so our pace wont be dictated by that element. In a small way, this might actually increase our chances of setting the record. In the time since Ran left, its been collectively decided that we make the move to a 24-hour travel schedule. This means that the machines will always be running. In the dead of the Antarctic winter, where temperatures advance toward negative triple digits, this is a better way to operate heavy equipment. Even at -40C, it can take up to half a day to get the machine to operating temperature. By decreasing extended shut-down periods, we will retain all of the heat and eliminate the daily thermal shift that the D6Ns would otherwise be subject to. Eliminating the constant expansion and contraction of the materials that make up our bulldozers will help keep the machines in one piece over the next five to seven months. But, with all good news comes bad. Only two of the five members remaining in the Ice Team have any valuable operating experience with the Caterpillar D6N tractors. We realized some time ago now that the other three would have to be trained, and quickly. The harsh environment of Antarctica is normally a bad place to learn a new skill of any kind. However, as it has been discovered, the D6Ns will not pull over twice their manufacturers recommended draw bar load at any speed faster than 3.5km/h. We need to run longer hours so that we can accumulate greater daily distances and take better advantage of good weather when it comes. While we were returning from our fuel depot to the coast with a skeleton load - about 25 tonnes per Cat - and at a straight
30

forward descent back to Crown Bay, we had ideal conditions for training (well, as ideal as Antarctic conditions can be). Seated outside the cab, on the beautiful folding catwalks designed and fabricated by Finning in Cannock, England, I leaned through the side window and gave condensed operating clinics to the three non-drivers, specific to our unique situation. Starting with Rob, then Ian and lastly Brian, they each spent nearly four hours driving and listening to me be extremely thorough (even for me) regarding the dos and do nots of operating a bulldozer in extreme conditions with limited spare parts. And, I am sure that they will make me proud.

Kindred spirits: Sir Ranulph Fiennes and Spencer Smirl before the expedition.

tracks & treads

Summer 2013

www.finning.ca

COLD CALL
Finnings Customer Support Centre parts team receives an average of 900 calls every day from customers primarily based in western Canada. But at 3:30 a.m. on April 14, an important call arrived from 16,000 kilometres away. Finning mechanic Spencer Smirl called the trusted 1-888-FINNING number during his adventure in Antarctica. Smirl was looking for information regarding a specific part and since his Internet connection wasnt working up to speed, he simply picked up the phone and called Finning.Emailing from Antarctica, Spencer said, One of theD6Ns had lost communication with the implementECM (electronic control module) and after checking my spare ECMs, I noticed a discrepancy between the part number in my parts book and on the ECM itself. I picked up the phone and called 1-888-FINNING. A tech took my call and within seconds he was able to confirm that all the numbersI had were for the same part and I was on the right track. Its great knowing that no matter what time of day, and no matter where on the planet you find yourself, if youre servicing Cat equipment, you can always pick up a phone and talk to an expert at Finning.

www.finning.ca

Summer 2013

31

Portrait: Pat Magnus

In some jobs it feels like the phone never stops ringing. Pat Magnus wouldnt have it any other way. Shes a customer support representative and one of the friendly voices that answer 1-888FINNING. Based out of the Kamloops Customer Support Centre, Pat has been with the company for nearly two years and loves her work. An integral part of Finnings commitment to customer service, she takes great pride in handling each call with respect. Open 24 hours a day, seven days a week and 365 days a year, 1-888-FINNING is wellknown to Finning customers and employees, and its also on every company vehicle, publication and webpage. While a lot of callers know exactly who theyre looking for, there are just as many who dont. Its up to Pat to find the Finning employee best suited to take the call. Her work is also potentially life-saving. Finnings Work Alone Person Check program requires any employee working solo to inform customer support and check in at predetermined intervals. If customer support doesnt receive updates from the worker as expected, the representative takes steps to ensure that the worker is safe. No matter what the call is, you have to be ready, Pat says. One minute you may be dealing with a familiar customer, the next could be an emergency situation. Surprisingly, a lot of people ask if she actually works for Finning. Some folks assume that the call centre is outsourced to another company, so part of my job is letting them know Im part of the Finning family and we all do our best to handle their call and connect them with the appropriate person.

photography by rick tolhurst

32

tracks & treads

Summer 2013

www.finning.ca

www.finning.ca

Summer 2013

33 33

Count on Us

SERVICE WITH A SMILE

Back in 1964, Finning service technician Jim Cherry was ready for anything the job offered. His trusty 1959 Ford F150 was with him every step of the way during his early years with the company. Jim was the resident service man in Nakusp before moving to Nelson to assume shop chargehand duties. Thats Finnings old Nelson facility in the background which was the companys first ever permanent branch. Looking back on his career, Jim says everywhere he went Finning had outstanding employees to work alongside and the company always had great customers. It made it a very easy place to work at, he recalls.

34

tracks & treads

Summer 2013

www.finning.ca