Product Data Sheet: General Description
Product Data Sheet: General Description
Product Data Sheet: General Description
Composition
AL-4B contains water, fluorescent dyes, liquid emulsifying agents & solvents, but no corrosion inhibitor.
Advantages
Easy to use and prepare Cost effective
AL-4B
Yellow Green Bland > 100C 0.99 g/ml 5.0 cS 6 to 8
Like all MAGNAFLUX materials, AL-4B is closely controlled to provide unique batch to batch consistency & uniformity to assure optimum process control and inspection reliability.
Penetrant Removal:
AL-4B is easily removed by water rinsing; care must be taken to avoid over removal of penetrant from discontinuities.
Recommended Developers:
Dry powder developer ZP-4B. Free flowing lightweight powder which is applied to the dry component by powder storm, dusting, electrostatic spray or by puffer. Solvent based developer SKD-S2. Quick drying material which is applied by spraying. The component under test must be dry before developer application. Aqueous or water based developers ZP-14A and ZP-5B are supplied as powder concentrates to be made up with water to produce working solutions. These developers are applied prior to component drying, by dipping or spraying. After application the component must be dried before inspection. Aqueous developers should be used with great care, as they tend to wash the Penetrant out of the discontinuities on prolonged contact.
Coverage
1 lt covers approximately 20 square metres. AL-4B is available in 200 lt drums.
Safety
Safety data sheets for these products are available on request. Avoid contact with skin and eyes. Wear suitable gloves and eye protection if there is a risk of skin or eye contact.
Magnaflux a Division of I.T.W. Ltd., Faraday Road, South Dorcan Industrial Estate, Swindon, Wiltshire, SN3 5HE. Tel : (01793) 524566 Fax : (01793) 619498 Web site : www.magnaflux.co.uk Issue Date : 31/10/05 TDS No : AL-4B Rev No 00 :