Product Data Sheet 14HF: Magnaflux
Product Data Sheet 14HF: Magnaflux
Product Data Sheet 14HF: Magnaflux
MAGNAFLUX
Like all MAGNAFLUX materials, 14HF is closely controlled to provide unique batch to batch consistency & uniformity to assure optimum process control and inspection reliability.
MAGNAFLUX A Division of ITW Ltd FARADAY RD, SOUTH DORCAN IND EST, SWINDON, WILTS, SN3 5HE. U.K.
MAGNAFLUX
Bath replenishment / Concentration control When in use, the magnetic content of any ink will become depleted (Not applicable to aerosols) To guard against this the ink strength should be checked at least once each day. The most widely used method of control is by settlement volume using a graduated ASTM pear shaped centrifuge tube. When the settlement volume approaches the lower limit then additions of Magnaflux 14A particles can be made to the bath providing the bath liquid is still clean and uncontaminated. If the bath appears contaminated or has been in use for any length of time, it should be replaced. After inspection the components should be properly demagnetized before cleaning to insure ease of particle removal.
Specification compliance BS 4069 ASME B & PV Code, Sec V DIN 54132 MIL-STD-2132 ROLLS ROYCE ASTM E 1444-94a AMS-3045 ASTM E-709 AMS-3046
Safety Safety data sheets for this product are available on request. Avoid contact with skin and eyes. Avoid breathing spray mists. Wear suitable gloves and eye protection if there is a risk of skin or eye contact.
Magnaflux Division of I.T.W. Ltd., Faraday Road, South Dorcan Industrial Estate, Swindon, Wiltshire, SN3 5HE. Tel : (01793) 524566 Fax : (01793) 619498 Rev No 00 Rev Ref :