SPC-6000 SPC 6000 Quick Set-Up Guide: Technical Information
SPC-6000 SPC 6000 Quick Set-Up Guide: Technical Information
Writer Issue No. Related Models Subject Technical Support in HQ CS-110309 SPC-6000, SRD Series Importance Date of Issue Type Low 9th Mar. 2011 Information
Summary The SPC-6000 Quick set-up guide describes how to connect to both an SPD speed dome and Samsung Digital Video Recorder for both basic and multiple operations. The equipment used in this example includes: SPC-6000(FW v1.00_100913) SRD-1670DC(FW v1.02_110118164134) SPD-3750T(Dome v1.28)
Caution : Both of SPC-6000 and SCC-3100A cannot be used as Master, Slave in one system. 2 keyboards are not compatible, if SVR and SRD series are used in one system, the system keyboard should be separately used as recommended below below. - SVR Series : SCC-3100A - SRD Series : SPC-6000
Contents
<Multiple p Operation> p
a. hardware connection
First, lets take a look at the system with coax camera installed. In order to control the specific ifi camera of f the h specific ifi S SRD connected, d what h you only l need d to d do i is to connect S SRD. If succeed, keyboard will send packets to control SRD and SRD will control PTZ cameras. For example, if you would like to control Camera which is connected to channel 1 of SRD, Connect SRD first by pushing [DVR] + [1] + [Enter] and choose channel 1. Also, if you would like to control Camera connected to channel 2 of SRD 2, Connect SRD by pushing [DVR] + [2] + [Enter] + [2] + [CAM] in sequence.
Contents
In case of system using RS-485 data cable, TX port on rear side of SRD will connect both of keyboard data +/- and camera data +/-. It looks like the SRD uses Serial control (Keyboard controls SRD, and SRD controls Camera that I call it Serial control) but SRD will just bypass the data from the keyboard and pass it to the camera directly.(I call it Parallel control) In short, SRD with ith coax PTZ : S Serial i l control t lf from th the k keyboard b d SRD with RS-485 PTZ : Parallel control from the keyboard (SRD bypass data & Keyboard controls PTZ directly)
Therefore, Please assign ID of PTZs & SRDs with all different numbers to prevent communication error of the data between the keyboard and devices. Also please dont forget to set termination as ON for far position of camera from the DVR. b. menu set
- End -