Technical Data

Stratix Ethernet Switch Specifications

Stratix 5700 Catalog Numbers 1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA, 1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL,1783-BMS10CGA, 1783-BMS10CGP, 1783-BMS10CGN, 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK Stratix 8000 and 8300 Catalog Numbers 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T, 1783-MX08T, 1783-MX08F Stratix 6000 Catalog Numbers 1783-EMS08T, 1783-EMS04T Embedded Switch Technology Catalog Numbers 1783-ETAP, 1783-ETAP1F, 1783-ETAP2F Stratix 2000 Catalog Numbers 1783-US03T01F, 1783-US06T01F, 1783-US05T, 1783-US08T

Topic Stratix 5700 Ethernet Managed Switches Stratix 8000 and Stratix 8300 Ethernet Managed Switches Stratix 6000 Ethernet Managed Switches Embedded Switch Technology Stratix 2000 Ethernet Unmanaged Switches Accessories Additional Resources

Page 2 7 11 14 18 21 22

Stratix Ethernet Switch Specifications

Stratix 5700 Ethernet Managed Switches

Cat. No. 1783-BMS06SL 1783-BMS06SA 1783-BMS06TL 1783-BMS06TA 1783-BMS06SGL 1783-BM06SGA 1783-BMS06TGL 1783-BMS06TGA 1783-BMS10CL 1783-BMS10CA 1783-BMS10CGL 1783-BMS10CGA 1783-BMS10CGP 1783-BMS10CGN 1783-BMS20CL 1783-BMS20CA 1783-BMS20CGL 1783-BMS20CGP(1) 1783-BMS20CGN(1) 1783-BMS20CGPK
(1) Future release (2) FE = Fast Ethernet; GE = Gigabit Ethernet.

Total Ports 6 6 6 6 6 6 6 6 10 10 10 10 10 10 20 20 20 20 20 20

RJ45 Ports(2) 4 FE 4 FE 6 FE 6 FE 4 FE 4 FE 4FE + 2 GE 4 FE + 2 GE 8 FE 8 FE 8 FE 8 FE 8 FE 8 FE 16 FE 16 FE 16 FE 16 FE 16 FE 16 FE

Combo Ports 2 FE 2 FE 2 GE 2 GE 2 GE 2 GE 2 FE 2 FE 2 GE 2 GE 2 GE 2 GE

SFP Slots 2 FE 2 FE 2 GE 2 GE 2 FE 2 FE 2 FE 2 FE 2 FE 2 FE

Software Type Lite Full Lite Full Lite Full Lite Full Lite Full Lite Full Full Full Lite Full Lite Full Full Full

CIP Sync (IEEE 1588) Yes Yes Yes Yes Yes

NAT Yes Yes

Conformal Coating Yes

Technical Specifications - Stratix 5700 Switches

Attribute 1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA 1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL, 1783-BMS10CGA 1783-BMS10CGN, 1783-BMS10CGP 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK

Power requirements Power consumption Isolation voltage

User supply: 0.52.0 A max @ 1248V DC Alarm: 1 A @ 30V DC or 0.5 A @ 48V DC 9.5 W @ 24V DC @ 40 C (104 F) 15 W max 12.5 W @ 24V DC/40 C (104 F) 17 W max 15 W @ 24V DC/40 C (104 F) 20 W max 21 W @ 24V DC/40 C (104 F) 30 W max

50V (continuous), basic insulation type, DC power ports to ground, DC power ports to Ethernet ports, and DC power ports to alarm ports No isolation between individual Ethernet ports No isolation between console port and system Type tested at 850V DC for 60 s

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Technical Specifications - Stratix 5700 Switches

Attribute 1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA 1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL, 1783-BMS10CGA 1783-BMS10CGN, 1783-BMS10CGP 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK

Ethernet connections DC power connections Alarm connections Ground connection SFP modules(1)

RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.50.8 mm2 (2018 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max, 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 0.50.8 mm2 (2018 AWG) solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire (such as Belden part number 9318), 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 4.0 mm2 (12 AWG) min, stranded copper wire 1783-SFP100FX 1783-SFP1GSX 1783-SFP100LX 1783-SFP1GLX

Memory card Torque Weight, approx Wiring category(2)

1784-SD1 0.23 Nm (2.0 lbin) on power and alarm connectors 0.96 Nm (8.5 lbin) max on ground terminals 1.11 kg (2.45 lb) 3 - on console and alarm ports 2 - on DC power ports 2 - on Ethernet ports None (open-style) T4 T4 1.25 kg (2.75 lb) 1.38 kg (3.05 lb) 2.04 kg (4.50 lb)

Enclosure type rating North American temp code IEC temp code

(1) SFP modules supported only on switches with combo ports or SFP slots. (2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.

Environmental Specifications - Stratix 5700 Switches

Attribute

Stratix 5700 Switches -4060 C (-40140 F)

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)

60 C (140 F) -4085 C (-40185 F)

595% noncondensing

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Environmental Specifications - Stratix 5700 Switches

Attribute

Stratix 5700 Switches 2 g @ 10500 Hz 30 g 55 g Class A 8 kV contact discharges 15 kV air discharges 20V/m with 1 kHz sine-wave 80% AM from 801000 MHz 20V/m with 200 Hz 50% pulse 100% AM at 900 MHz 10V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 5 kHz and 2 kV at 100 kHz on DC power ports 4 kV at 2.5 kHz, 2 kV at 5 kHz, and 1 kV at 100 kHz on alarm ports 4 kV at 2.5 kHz, 2 kV at 5 kHz, and 1 kV at 100 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on Ethernet ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 10 ms interruption on DC supply ports 1 kV line-line (DM) and 2.5 kV line-earth (CM) on power ports

Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 EFT/B immunity IEC 61000-4-4

Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Voltage variation IEC 61000-4-29 Damped oscillatory wave immunity IEC 61000-4-18

Certifications - Stratix 5700 Switches

Certifications (when product is marked)(1) c-UL-us CE Stratix 5700 Switches UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA nC IIC T4X Gc Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 ODVA conformance tested to EtherNet/IP specifications

C-Tick Ex

Korean EtherNet/IP

(1) See the Product Certification link at http://www.ab.com for declarations of conformity, certificates, and other certification details.

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Dimensions - Stratix 5700 Switches

To prevent the switch from overheating, observe the following minimum clearances: Top and bottom: 50.8 mm (2.0 in.) Sides: 50.8 mm (2.0 in.) Front: 50.8 mm (2.0 in.) These diagrams are representative of the Stratix 5700 switches. Actual faceplates vary depending on the catalog number.
6-port Switches (1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA) 7.48 cm (2.94 in.) 10-port Switches (1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL, 1783-BMS10CGA)

9.14 cm (3.6 in.)

12.95 cm (5.1 in.)

12.95 cm (5.1 in.)

11.67 cm (4.59 in.) 10.92 cm (4.3 in.)

0.75 cm (0.29 in.)

11.67 cm (4.59 in.) 10.92 cm (4.3 in.)

0.75 cm (0.29 in.)

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

10-port Switches (1783-BMS10CGP, 1783-BMS10CGN)

20-port Switches (1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK) 12.7 cm (5.0 in.)

9.14 cm (3.6 in.)

12.95 cm (5.1 in.)

12.95 cm (5.1 in.)

13.58 cm (5.34 in.) 12.83 cm (5.05 in.)

0.75 cm (0.29 in.)

13.58 cm (5.34 in.) 12.83 cm (5.05 in.)

0.75 cm (0.29 in.)

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Stratix 8000 and Stratix 8300 Ethernet Managed Switches

Technical Specifications - Stratix 8000 and Stratix 8300 Switches
Attribute Description 1783-MS06T Stratix 8000 managed switch, Layer 2 6 ports 2.0 A 1A max @ 1860V DC, CL 2/SELV 1A max @ 30V DC, CL 2/SELV 15.1 W 15.7 W 15.1 W 15.7 W 0.3A @ 12V DC 2.8 W 75 V (continuous), basic insulation type, expansion backplane to network channels No isolation between individual Ethernet ports Type tested at 1000V AC for 60 s 10.1 W 1A @ 12V DC 1783-MS10T Stratix 8000 managed switch, Layer 2 10 ports 1783-RMS06T Stratix 8300 managed switch, Layer 3 6 ports 1783-RMS10T Stratix 8300 managed switch, Layer 3 10 ports 1783-MX08T Expansion module 8 ports, copper 1783-MX08F Expansion module 8 ports, fiber

Inrush current, max Switch input rating, max Alarm relay rating, max Power dissipation Isolation voltage

75 V (continuous), basic insulation type, power to ground, power to network channels, and power to alarm No isolation between individual Ethernet ports No isolation between console port and system Type tested at 1000V AC for 60 s

Ethernet connections DC power and alarm connections Functional ground connection SFP modules(1)

RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.50.8 mm2 (2018 AWG) solid or stranded copper wire rated at 90 C (194 F) or greater, 1.2 mm (3/64 in.) insulation max 3.35.3 mm2 (1210 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1783-SFP100FX 1783-SFP1GSX 1783-SFP100LX 1783-SFP1GLX 1783-RMCF

Memory card Torque Wiring category(2)

1783-MCF

0.23 Nm (2.0 lbin) on power and alarm connectors 2 - on alarm ports 2 - on power ports 2 - on Ethernet ports None (open-style) Meets IP20 T4 T4 2 - on Ethernet ports

Enclosure type rating North American temp code IEC temp code

(1) SFP modules supported only on switches with combo ports or SFP slots. (2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Technical Specifications - Stratix 8000 and Stratix 8300 Fiber Expansion Module
Attribute Ethernet data rate Connecting mode Optical wavelength Optical cable length, max Optical link budget Connector type 1783-MX08F 100 Mbps Full duplex 1310 nm Graded index multimode fiber; 2000 m 8 db with 62.5/125 m multimode cable 4 db with 50/125 m multimode cable IEC 61754-20 LC connector

Environmental Specifications - Stratix 8000 and Stratix 8300 Switches

Attribute Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR 11 ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T -4060 C (-40140 F) 1783-MX08T 1783-MX08F

60 C (140 F) -4085 C (-40185 F)

595% noncondensing 2 g @ 10500 Hz 20 g 30 g Group 1, Class A 8 kV contact discharges 15 kV air discharges 20V/m with 1 kHz sine-wave 80% AM from 801000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 10V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 2.5 kHz and 2 kV at 5 kHz on power ports 4 kV at 2.5 kHz and 2 kV at 5 kHz on alarm ports 4 kV at 2.5 kHz and 2 kV at 5 kHz on Ethernet ports 4 kV at 2.5 kHz and 2 kV at 5 kHz on Ethernet ports

EFT/B immunity IEC 61000-4-4

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Environmental Specifications - Stratix 8000 and Stratix 8300 Switches

Attribute Surge transient immunity IEC 61000-4-5 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T 1 kV line-line (DM) and 2 kV line-earth (CM) on power ports 1 kV line-line (DM) and 2 kV line-earth (CM) on alarm ports 2 kV line-earth (CM) on Ethernet ports 1783-MX08T 2 kV line-earth (CM) on Ethernet ports 1783-MX08F

Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Oscillatory surge withstand IEEE C37.90.1 Voltage variation IEC 61000-4-29

10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300 A/m short duration at 50 and 60 Hz 2.5 kV 10 ms interruption on DC supply ports

Certifications - Stratix 8000 and Stratix 8300 Switches

Certifications (when product is marked)(1) c-UL-us CE 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T 1783-MX08T, 1783-MX08F

UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements (Zone 2) Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications

C-Tick Ex

KC EtherNet/IP

(1) See the Product Certification link at http://www.ab.com for declarations of conformity, certificates, and other certification details.

Optional Expansion Modules - Stratix 8000 and Stratix 8300 Switches

Cat. No. 1783-MX08T 1783-MX08F Description Expansion module with 8 10/100 Base-T copper Ethernet ports Expansion module with 8 100 Base-F fiber-optic Ethernet ports

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Dimensions - Stratix 8000 and Stratix 8300 Switches

This illustration shows dimensions for the 1783-MS10T switch and the 1783-MX08T expansion module. Dimensions for the other switches are the same as the 1783-MS10T switch. Dimensions for the 1783-MX08F expansion module are the same as the 1783-MX08T expansion module.
Switch and Expansion Module
15.3 cm (6.03 in.) 9.71 cm (3.82 in.)

Switch and Expansion Module (mated)

24.3 cm (9.57 in.)

14.8 cm (5.83 in.)

9.81 cm (3.87 in.) 33.27 cm (13.1 in.) 11.1 cm (4.38 in.)

Switch (side view)

Switch and Expansion Modules (mated)

11.75 cm (4.63 in.)

31801-M

For panel-mounting, the height of the center of the mounting holes on both the top and bottom latches measures 8.73 mm (0.34 in.) above the top surface (or below the bottom surface) of the switch. On the switch base unit, the tab hole center-to-center spacing is 6.83 cm (2.69 in.). For expansion modules, the tab hole center-to-center spacing is 4.36 cm (1.72 in.).

Airflow around the switch and through the vents is unrestricted. To prevent the switch from overheating, these minimum clearances must be met: Top and bottom: 105 mm (4.13 in.) Left and right: 90 mm (3.54 in.) Front: 65 mm (2.56 in.)

10

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Stratix 6000 Ethernet Managed Switches

Technical Specifications - Stratix 6000 Switches
Attribute 1783-EMS08T 1783-EMS04T

Description

Stratix 6000 managed switch 8 ports 1 fiber SFP slot 250 mA @ 24V DC (1248V DC) CL 2/SELV 5.8 W 24.6 BTU/hr @ 60 C (140 F) 8 RJ45 10/100 full/half duplex ports, optional SFP transceiver port

Stratix 6000 managed switch 4 ports 100 mA @ 24V DC (1248V DC) CL 2/SELV 2.6 W

Power requirements Power dissipation, max Thermal dissipation, max Network ports Protocols Indicators EtherNet/IP features Switch features Options Inrush current, max Isolation voltage

4 RJ45 10/100 full/half duplex ports

TCP/IP, EtherNet/IP, Telnet, Http, DHCP, BOOTP, FTP, IGMP, SMTP 16 port indicators 3 status indicators 8 port indicators 2 status indicators

MAC ID management, bandwidth alarming, port control, link status, scaled bandwidth information, and connections active VLAN, IGMP snooping, IGMP query V1 and V2, DHCP server, BOOTP server, QoS, port mirroring 1 GB fiber-optic transceiver 2.2 A 50V (continuous), basic insulation type, power to ground and power to network channels No isolation between individual network channels Routine tested at 707V AC for 1 s RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.333.3 mm2 (2212 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max 3.3 mm2 (12 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1783-SFP1GSX 1783-SFP1GLX 1.36 Nm (12 lbin) on DC power and functional ground 2 - on DC power ports 2 - on Ethernet ports None (open-style) Meets IP20 T4 T4

Ethernet connections DC power connections Functional ground connection SFP modules(1) Torque Wiring category(2) Enclosure type rating North American temp code IEC temp code

(1) SFP modules supported only on switches with combo ports or SFP slots. (2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

11

Stratix Ethernet Switch Specifications

Environmental Specifications - Stratix 6000 Switches

Attribute 1783-EMS04T, 1783-EMS08T

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Operating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Nonoperating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR 11 ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3

060 C (32140 F)

60 C (140 F) -4085 C (-40185 F)

595% noncondensing 2 g @ 10500 Hz 15 g 30 g Group 1, Class A 6 kV contact discharges 8 kV air discharges 10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 1V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 2 kV at 5 kHz on power ports 1 kV at 5 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on shielded Ethernet port 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300A/m short duration at 50 and 60 Hz 10 ms interruption on DC supply ports

EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Voltage variation IEC 61000-4-29

12

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Certifications - Stratix 6000 Switches

Certifications (when product is marked)(1) 1783-EMS04T, 1783-EMS08T

c-UL-us c-ETL-us CE

UL Listed Information Technology Equipment, certified for US and Canada. See UL File E151729. ETL Listed Industrial Control Equipment, certified for US and Canada. ETL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements (Zone 2) Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications

C-Tick Ex

KC EtherNet/IP

(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

Dimensions - Stratix 6000 Switches

52.07 mm (2.05 in.)

118 mm (4.64 in.) 12 cm

(0.47 in.)

107 mm (4.21 in.)

12 mm (0.47 in.)

27.7 mm (1.09 in.)

SFP Module Installed

88.9 mm (3.50 in.)

Mount the switches, as shown, in the vertical position only. We do not recommend horizontal mounting due to thermal considerations. Follow these guidelines. Provide 50 mm (2 in.) of space on all sides for adequate heat dissipation. Leave 100 mm (4 in.) for installation and removal if using the fiber-optic port on the bottom of the 1783-EMS08T switch.
Rockwell Automation Publication 1783-TD001C-EN-P - December 2012 13

Stratix Ethernet Switch Specifications

Embedded Switch Technology

Technical Specifications - EtherNet/IP Taps
Attribute Description 1783-ETAP EtherNet/IP tap 3 copper ports Copper 125 mA @ 24V DC 24V DC (20.427.6V DC) CL 2/SELV 30V (continuous), basic insulation type, network channels to power and network channels to network channels Type tested at 1250V DC for 60 s Power consumption, max Power dissipation Ethernet connections DC power connections Torque Wiring category(1) Enclosure type rating North American temp code IEC temp code
(1)

1783-ETAP1F EtherNet/IP tap 2 copper ports 1 fiber port Fiber, single-port 200 mA @ 24V DC

1783-ETAP2F EtherNet/IP tap 1 copper port 2 fiber ports Fiber, dual-port 260 mA @ 24V DC

Tap type Current consumption, max DC power supply voltage rating Isolation voltage

Type tested at 853V AC for 60 s 4.8 W 4.8 W 6.24 W 6.24 W

3W 3W

RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 One 0.333.3 mm2 (2212 AWG) or two 0.331.3 mm2 (2216 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max 0.60.8 Nm (57 lbin) on power connectors 1 - on power ports 2 - on communication ports None (open-style) T5 T5 T4A T4 T4 T4

Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.

14

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Technical Specifications - EtherNet/IP Tap Fiber Connections

Attribute Fiber transceiver type Optical wavelength Transmitter launch power at Beginning of Life (BOL), min Allow -1 dB at End of Life (EOL) Receiver sensitivity, min Receiver sensitivity, max Fiber channel power budget at rated BER (2 connected taps, either 1783-ETAP1F or 1783-ETAP2F) Fiber connections 1783-ETAP1F, 1783-ETAP2F 100Base-FX IEEE802.3u 1310 nm no cap -19 dBm into 62.5/125 m fiber, N/A = 0.275 -22.5 dBm into 50/125 m fiber, N/A = 0.20 -31.8 dBm -14 dBm 12.8 dB for 62.5/125 m multimode fiber 9.3 dB for 50/125 m multimode fiber Glass 62.5/125 m and 50/125 m multimode fiber Simplex or duplex Jacket type and jacket diameter is dependent on connector selection Graded Index (GI) fiber Per IEC 60794-1-1, IEC 60793-2-10 category A1 fibers IEC 61754-20 LC connector, maximum insertion loss 0.75 dB per connection 2 km (1.24 mi) (1)

Connector type Channel length, max

(1) The channel, that is, connectors and cable, must not exceed the allowable power budget.

Environmental Specifications - EtherNet/IP Taps

Attribute Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold) IEC 60068-2-2 (Test Bd, Operating Dry Heat) IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR 11 ESD immunity IEC 61000-4-2 1783-ETAP -2570 C (-13158 F) 1783-ETAP1F, 1783-ETAP2F -2560 C (-13140 F)

70 C (158 F) -4085 C (-40185 F)

60 C (140 F)

595% noncondensing 5 g @ 10500 Hz 30 g 50 g Group 1, Class A 6 kV contact discharges 8 kV air discharges

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

15

Stratix Ethernet Switch Specifications

Environmental Specifications - EtherNet/IP Taps

Attribute Radiated RF immunity IEC 61000-4-3 1783-ETAP 1783-ETAP1F, 1783-ETAP2F

10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 4 kV at 5 kHz on power ports 3 kV at 5 kHz on communication ports 1 kV line-line (DM) and 2 kV line-earth (CM) on power ports 2 kV line-earth (CM) on communication ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 10 ms interruption on DC supply ports

EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Voltage variation IEC 61000-4-29

Certifications - EtherNet/IP Taps

Certification(1) c-UL-us CE 1783-ETAP 1783-ETAP1F, 1783-ETAP2F

UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A and B) Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T5 X European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T 4 X

C-Tick Ex

KC EtherNet/IP

Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications

(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

16

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Dimensions - EtherNet/IP Taps

This illustration shows dimensions for the 1783-ETAP tap. The dimensions for the 1783-ETAP1F and 1783-ETAP2F taps are the same.

122.68 mm (4.83 in.) 131.57 mm (5.18 in.)

104.9 mm (4.13 in.)

35.05 mm (1.38 in.)

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

17

Stratix Ethernet Switch Specifications

Stratix 2000 Ethernet Unmanaged Switches

Technical Specifications - Stratix 2000 Switches
Attribute Description 1783-US03T01F Stratix 2000 unmanaged switch 3 copper ports 1 fiber port 2.2 A 20V AC (1024V AC) 24V DC (1035V DC) 30V (continuous), basic insulation type, power to network channels No isolation between individual network channels Type tested at 500V AC for 60 s 4 W (6 VA) Current 400 mA at 10V DC RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 1.52.5 mm2 (1614 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1.2 mm (3/64 in.) insulation max 0.8 Nm (7 lbin) on power connectors 2 - on power ports 2 - on communication ports None (open-style) Meets IP20 T4 T4 1783-US06T01F Stratix 2000 unmanaged switch 6 copper ports 1 fiber port 1783-US05T Stratix 2000 unmanaged switch 5 copper ports 1783-US08T Stratix 2000 unmanaged switch 8 copper ports

Inrush current, max AC power-supply voltage rating DC power-supply voltage rating Isolation voltage

Power consumption, max Ethernet connections DC power connections Torque, max recommended Wiring category(1) Enclosure type rating North American temp code IEC temp code

(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.

Technical Specifications - Stratix 2000 Fiber Connections

Attribute Ethernet data rate Connecting mode Optical wavelength Optical cable length, max Optical link budget Connector type Fiber connections 1783-US03T01F, 1783-US06T01F 100 Mbps Full duplex 1310 nm Graded index multimode fiber; 2000 m 8 db with 62.5/125 m multimode cable 4 db with 50/125 m multimode cable IEC 61754-20 LC connector Glass 62.5/125 m and 50/125 m multimode fiber Simplex or duplex Jacket type and jacket diameter is dependent on connector selection Graded Index (GI) fiber Per IEC 60794-1-1, IEC 60793-2-10 category A1 fibers

18

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Environmental Specifications - Stratix 2000 Switches

Attribute

1783-US06T01F 060 C (32140 F)

1783-US03T01F,1783-US05T, 1783-US08T

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Operating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Nonoperating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR 11 ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3

60 C (140 F) -4085 C (-40185 F)

595% noncondensing 2 g @ 10500 Hz 15 g 30 g Group 1, Class A 4 kV contact discharges 8 kV air discharges 6 kV contact discharges 8 kV air discharges

10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 1V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 2 kV at 5 kHz on power ports 2 kV at 5 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on shielded Ethernet port 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz

EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

19

Stratix Ethernet Switch Specifications

Certifications- Stratix 2000 Switches

Certifications (when product is marked)(1)

1783-US03T01F, 1783-US06T01F, 1783-US05T, 1783-US08T UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA II T4 X Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications

c-UL-us

CE

C-Tick Ex

KC EtherNet/IP

(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

Dimensions - Stratix 2000 Switches

1783-US03T01F and 1783-US05T Switch Dimensions

P W R

108 mm (4.25 in.)

RX

3
TX

L I N K

127.8 mm (5.03 in.) 22.5 mm (0.89 in.)

The 1783-US06T01F and 1783-US08T switches have the same depth and height as the switches above, but they are 45 mm (1.77 in.) wide.

20

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

1783-US03T01F

Stratix Ethernet Switch Specifications

Accessories
Small Form-factor Pluggable (SFP) Transceivers
Cat. No. Description Wavelength Core Size/ Cladding Size (micron) 50/125 62.5/125 1783-SFP100LX 100 Base-LX single-mode transceiver 1310 nm G.652 Modal Bandwidth (MHz/km) 500 500 10 km (32.81 ft) Cable Length Compatibility

1783-SFP100FX

100 Base-FX multi-mode transceiver

1310 nm

2 km (6562 ft)

Stratix 5700 Stratix 8000 Stratix 8300 Stratix 5700 Stratix 8000 Stratix 8300 Stratix 6000 Stratix 5700 Stratix 8000 Stratix 8300 Stratix 6000 Stratix 5700 Stratix 8000 Stratix 8300

1783-SFP1GSX

1000 Base-SX multi-mode transceiver

850 nm

62.5/125 62.5/125 50/125 50/125

160 200 400 500

220 m (722 ft) 275 m (902 ft) 500 m (1640 ft) 550 m (1804 ft) 10 km (32.81 ft)

1783-SFP1GLX

1000 Base-LX/LH single-mode transceiver

1310 nm

G.652

Memory Cards
Cat. No. 1784-SD1 1783-MCF 1783-RMCF Description 1 GB industrial SD card Stratix 8000 CompactFlash card (spare) Stratix 8300 CompactFlash card (spare) Compatibility Stratix 5700 Stratix 8000 Stratix 8300

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

21

Stratix Ethernet Switch Specifications

Ethernet Cable
Cat. No. 1585J-M8PBJM-2 1585J-M8PBJM-5 1585J-M8PBJM-10 1585J-M8CBJM-2 1585J-M8CBJM-5 1585J-M8CBJM-10 1585-C8CB-S100 1585-C8PB-S100 1585-C8PB-S300 1585-C8PB-S600 1585J-M8CC-SH Field attachable connector, IDC Unshielded Ethernet cable spool Shielded Ethernet cable spool Shielded (STP) RJ45 to RJ45 patchcord Description Unshielded (UTP) RJ45 to RJ45 patchcord Cable Length 2 m (6.56 ft) 5 m (16.41 ft) 10 m (32.81 ft) 2 m (6.56 ft) 5 m (16.41 ft) 10 m (32.81 ft) 100 m (328.08 ft) 100 m (328.08 ft) 300 m (984.25 ft) 600 m (1, 968.51 ft)

For additional Ethernet media choices, see On-Machine Connectivity Catalog, publication M117-CA001.

Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource EtherNet/IP Industrial Protocol White Paper, publication ENET-WP001 Stratix 5700 Ethernet Managed Switch Installation Instructions, publication 1783-IN009 Stratix 5700 Ethernet Managed Switches User Manual, publication 1783-UM004 Stratix 8000 and 8300 Ethernet Managed Switches User Manual, publication 1783-UM003 Stratix 6000 Ethernet Managed Switch User Manual, publication 1783-UM001 Stratix 2000 Ethernet Unmanaged Switch Installation Instructions, publication 1783-IN001 Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Product Certifications website, http://www.ab.com Description Describes how to implement services and data objects on a TCP/UDP/IP based Ethernet network. Provides details about installing and configuring the switch. Provides detailed information on configuring and managing the switches. Provides detailed information on configuring and managing the switches. Provides details about how to configure and use the switch. Provides details about installing and configuring the switch. Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details.

You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.

22

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

Stratix Ethernet Switch Specifications

Notes:

Rockwell Automation Publication 1783-TD001C-EN-P - December 2012

23

Important Information
Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid-state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this publication are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.

Allen-Bradley, Rockwell Software, Rockwell Automation, LISTEN.THINK.SOLVE., On-Machine, Stratix 2000, Stratix 5700, Stratix 6000, Stratix 8000, and Stratix 8300 are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400

www.rockwel lautomation.com
Power, Control and Information Solutions Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640 Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846

Publication 1783-TD001C-EN-P - December 2012

Supersedes Publication 1783-TD001B-EN-P - November 2012 Copyright 2012 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.