ENGINEERING COUNCIL

Private Bag X 691 BRUMA 2026 Tel: (011) 607-9500 Fax: (011) 622-9295 Email: [email protected] Website: www.ecsa.co.za

OF

SOUTH AFRICA
Waterview Corner, 1 Floor, 2 Ernest Oppenheimer Avenue Bruma Lake Office Park BRUMA Johannesburg 2198
st

(15/11/2012)

Form B1.1

Office Use Ref.:

APPLICATION FORM REGISTRATION

NB:

AS A

PROFESSIONAL ENGINEERING TECHNOLOGIST

First Names:

Please consult the Information Sheets (Sheets B1.1 & B1.2) before completing this Application.

1.

General Information:
PHOTOGRAPH (Passport-type. Please paste do not staple) Alternatively, insert electronically in JPEG or similar format

Surname:

Date of Birth:

Identity No: or

*Race Group: Please tick the applicable block Home Address:

Asian Coloured

Black White

Passport No. and Country:

Country of normal residence:

Postal Address:

Name & Address of present Employer:

Tel. No. (Home): Tel. No. (Work): (include area codes)

Title of Position held:

Tel. No. (Employer): Fax No.: (include area codes) E-mail:

Cell No.:
E-mail:

*Completion of this section is necessary in order to accurately reflect equity statistics in terms of Government Policy.

2.

Qualifications:
Educational Institution

(All qualifications at tertiary level) (List of subjects to be provided on Form B1.3) Attendance Date of final Qualification from to examination

Office use

NB:

Kindly initial this page in the presence of a Commissioner of Oaths / Justice of Peace. Commissioner Of Oaths/ Justice Of Peace:

Applicant: .

-2-

(15/11/2012)

Form B1.2

3.

Previous / Current Registration or Application Details:

Registered Lift Inspector, etc.) Type Category

(eg. Candidate Engineering Technologist, Number Date

Previous Registration: Current Registration: Previous Application:

4.

Membership of Voluntary Associations recognised in terms of Act No 46 of 2000 (or other):

(If more space is needed, please supply information separately.) Membership grade Name of Association / Institute / Society and date accepted Number of years Office held

5.

Application Fee:

(See item 5 of the Information Sheet)

My Application fee of R

(cheque) is transferred electronically.

6.
(1)

Referees:
(2) (3)

E-mail: Tel No:

E-mail: Tel No:

E-mail: Tel No:

7.

Declaration:

I, (full names) hereby apply for Registration as a Professional Engineering Technologist and undertake to abide by all the provisions of the Engineering Profession Act, 2000 (Act No. 46 of 2000) and any Rules published thereunder, including the Code of Professional Conduct. I declare that Section 19(3)(a) of the Act does not preclude me from registration. I solemnly declare that, to the best of my knowledge, all the information contained herein is true.

Signature: __________________________ Sworn to/Affirmed before me at ___________________________

on this the ________ day of _____________________ (month & year). Commissioner of Oaths/ Justice of Peace:
Office Use Only

(Commissioners stamp)

Application fee: Received by:

R ______________________ ________________________ Date: ______________________

(Councils stamp)

Engineering Council of South Africa

(15/11/2012)

Form B1.3

Detailed information on

TERTIARY ENGINEERING QUALIFICATIONS

Professional Engineering Technologist
Name of Qualification:

All subjects passed

Year Obtained

Marks obtained (if available)

Extra subjects passed for incomplete qualifications

Total Credits

_____________________________________ Signature of Applicant

Engineering Council of South Africa

(15/11/2012)

Sheet B1.1

Information Sheet for Applicants Applying for Registration as a Professional Engineering Technologist
This document briefly sets out the information required by the Registration Committee to evaluate applications .

A. General:
All applicants should read, understand and provide all the information/documentation required in Sheets B1.1, B1.2, B2.1, B2.2, B4 and B5 of this application form. If the prescribed requirements are not met in the correct format, it is unlikely that applicants will be registered.
The onus is on the Applicant to provide all the evidence for consideration of the Council. The evidence must demonstrate/show competency in accordance with the specification requirements of Policy Statement R2/1B: Acceptable Engineering Work for Registration of a Professional Engineering Technologist. Your application will only be considered by the Council if the following documents are submitted: Completed Application Form (B1.1 & B1.2). Certified copies of qualifications. Completed detailed information on Qualifications (Form B1.3). Completed Experience Report (Forms B2.1), for each experience period and a Summary of Experience Reports (Form B2.2). Completed recent Engineering Report (Form B2.3). Completed Educational Development Report (Form B18), if applicable. Referee Reports, one from a supervisor, each duly completed.(Form B4). Completed Initial Professional Development Report (Form B5).

All supporting documentation must be clearly identified. If you are unable to complete any of the sections, please explain the reasons in a covering letter. In completing all paper forms use type or print clearly in black ink and minimum font size 10 to ensure clear copying. Forms may not be substituted but may be photocopied or recreated in electronic format. It is imperative to present records of only the most significant work and achievements. The Registration Committee considers that an application of fifty (50) A4 pages or less, is sufficient to assess an applicant and that longer presentations may not be to the applicants advantage. Your application for registration will only be considered when all referee reports have been received by the Council. If the referee reports do not reach the Council within a reasonable time, you will be notified accordingly. You will then be expected to contact the referees. If you are in doubt regarding any aspects please contact the Councils offices. The registration process may take 6 (six) months or longer to complete and each applicant will be informed of the Councils decision as soon as it becomes available. Information regarding the progress of any application will not be given telephonically.

Please note that it is your responsibility to ensure that all reports reach Councils offices timeously. For registration as a Professional Engineering Technologist applicants must have the benchmark academic qualification and three years of approved experience as a technologist, of which at least a minimum of one year must be in a position of taking full engineering responsibility. If the applicant does not have the benchmark academic qualification (BTech), their application will be considered by the alternate route. The difference must be made up by extended periods of both engineering experience and responsibility. The exact periods will depend upon the level of the qualifications held by the applicant. It must be clearly understood that the work which the candidates are doing or have done, as well as the submission of the completed Educational Development Report (Form B18) and the Initial Professional Development Report (Form B5), are important factors in determining registrability.

B. The Application Form:

The following information is given to assist applicants to complete this form the numbers refer to the equally numbered sections of the Application Form. 1. 2. General Information: Ensure that all personal details are correct. A recent passport type photograph of the applicant is required.

Qualifications: Original certified copies of your qualification certificate(s) must be submitted. (They must be certified by a Commissioner of Oaths or Justice of Peace. A Police Officer or Post Master will usually be able to help you.)

-2-

(15/11/2012)

Sheet B1.2

3.

If your documents are not in English, please supply certified translations. The benchmark academic qualification required by Council for registration is a BTech degree awarded by a South African University of Technology or Comprehensive University.

Previous / Current Registration or Application Details: If you have previously applied for registration in any category or were previously registered but your registration was cancelled for any reason, please provide category and previous registration number in relevant block. If you are currently registered in another category, also complete the appropriate block.

4. Membership of recognised Voluntary Associations: A list of associations is attached as Addendum A. Proof of current membership of such association will qualify you for a reduction in your annual fee should your application be successful. Persons who have applied for membership of any of the above-mentioned associations, but who have not yet been accepted, must indicate this in the appropriate block. Membership of other institutes/societies (not recognised) may be stated, but this does not qualify the applicant for a reduction in the annual fee. 5. Application and Annual Fees: Only cheques must accompany your application form, as no cash or postal orders will be accepted. If you do not have a cheque account, you may deposit cash at any Standard Bank into ECSAs account. Please contact our Accounts Department at (011) 607-9530/1/2/3 or Reception at (011) 607-9500 to obtain our banking details. Alternatively you may make payment (1) via the internet, or (2) you may ask your bank for a bank cheque to be made out to ECSA, (3) contact your banks telephone banking division to make payment into ECSAs account or (4) by credit card by phoning our Accounts Department. When making the deposit please ensure that your name and initials are entered in the field named Depositors name or reference number and attach a copy of the proof of deposit to your applicatio n form. Refer to separate sheet regarding fees payable, visit ECSAs website at http://www.ecsa.co.za, click on Finance or contact the Councils offices at (011) 607-9500 to determine the current fee. 6. Referees: Each applicant must, with the permission of the persons concerned, supply the Council with the names and addresses of three referees, who have personal knowledge of the applicant's work. Referees must be registered with ECSA as a Professional Engineering Technologist or a Professional Engineer, and in exceptional circumstances a Professional Certificated Engineer or a Professional Engineering Technician, of which one must be a direct supervisor. In case of the supervisor not being registered with ECSA a forth registered referee must be provided. Use Form B3 for formal correspondence with each referee, and enclose copies of the referee report (Form B4) and the guideline for referees (Sheet B4). It is suggested that you provide each referee with an addressed envelope with prepaid postage for the referee to forward the report direct to the Council. 7. Declaration:
Section 19(3)(a) of the Engineering Profession Act, 2000 (Act No. 46 of 2000) reads:

Despite subsection (2), the Council may refuse to register an applicant (i) if the applicant has been removed from an office of trust on account of improper conduct; (ii) has been convicted of an offence in the Republic, other than an offence committed prior to 27 April 1994 associated with political objectives, and was sentenced to imprisonment without an option of a fine, or, in the case of fraud, to a fine or imprisonment or both; (iii) if the applicant has, subject to paragraph (b), been convicted of an offence in a foreign country and was sentenced to imprisonment without an option of a fine, or, in the case of fraud, to a fine or imprisonment or both; (iv) if the applicant is declared by the High Court to be of unsound mind or mentally disordered, or is detained under the Mental Health Act, 1973; (v) for as long as the applicant is disqualified from registration as a result of any punishment imposed on him or her under this Act; (vi) if the applicant is an unrehabilitated insolvent whose insolvency was caused by his or her negligence or incompetence in performing work falling within the scope of the category in respect of which he or she is applying for registration.

Note that your application must be sworn to or affirmed before a Commissioner of Oaths or a Justice of Peace. Your attention is drawn to the initialling required at the bottom of the first page of the Application Form.

Page No.
Consult the Information Sheet (Sheet B2) before completing this report.

of

Engineering Council of South Africa Training and Experience Report Form B2.1 (17/5/2012)
As part of the Application for Registration as Professional Engineering Technologist
Applicants Name Period No: Start date: End date: No of weeks: Applicants Signature Position held: Did you train under a Commitment and Undertaking (CU)? If yes, provide number of CU: Supervisors Name and Address: Supervisors Signature: Date:

Employers Name and Address for this period: (This is the employer and site at which the work took place, e.g. the site the applicant has been seconded to).

Yes No
No:

Date: ECSA Registration No: Discipline of Engineering:

(Aeronautical, Agricultural, Chemical, Civil, Electrical, Industrial, Mechanical, Metallurgical, Mining)

Discipline Specific Field:

(e.g. Power Transmission, Electronic Communication, Transportation, Structures, Automotive, Roads, etc.)

Organogram showing supervisor(s), co-workers and those you supervised (if any). Show two levels above and below, if these exist. Give names, positions and registration (if any).

Report:
Write in proper paragraphs in the first person singular. Nature of training or experience*

Nature of problem(s) addressed in this period; method of analysis, developing solution and evaluation*

Documentation, reports, presentations prepared

Management of materials, machines, manpower, methods or money, contracts

Interaction with clients, stakeholders and other disciplines

Health and safety considerations, hazards and environmental considerations; other legislation

Applicants contribution to the work; nature and degree of applicants responsibility* Describe:

Degree of responsibility: A. Being exposed B. Assisting C. Participating D. Contributing E. Performing

Tick one:

*Compulsory fields

For office use only: Level assessed for this period:

Artisan/Specified Category Technician Technologist Technologist + Complex Engineer

Engineering Council of South Africa

(15/11/2012)

Form B2.3

Engineering Report
Use this form to submit a report under Outcomes 1 to 10 below in about 2500 to 3000 words on recent engineering work to which you have made a significant contribution. The report may cover conceptualisation, design and analysis, specification, tendering and adjudication, manufacturing, project and construction management, commissioning, maintenance, measurement and testing or planning at a broadly-defined level. Please also provide a sample relevant calculations and drawings as an addendum.

Name of Applicant: Designation of work and dates: (<15 words) Engineering brief and objective: (<30 words) Environment (Industry; Laboratory; Theory; Simulation) (<15 words) Short Summary (State engineering problems; solutions in < 30 words) Budget (<10 words)
Broadly-defined engineering problems have the following characteristics: (a) require coherent and detailed engineering knowledge underpinning the applicable technology area; and one or more of: (b) are ill-posed, under- or over specified, requiring identification and interpretation into the technology area; (c) encompass systems within complex engineering systems; (d) belong to families of problems which are solved in well-accepted but innovative ways; and one or more of: (e) can be solved by structured analysis techniques; (f) may be partially outside standards and codes; must provide justification to operate outside; (g) require information from practice area and sources interfacing with practice area that is complex and incomplete; (h) involves a variety of issues which may impose conflicting constraints: technical, engineering and interested or affected parties; and one or both of: (i) requires judgement in decision making in practice area, considering interfaces to other areas; (j) have significant consequences which are important in practice area, but may extend more widely Broadly-defined engineering activities (BDEA) have several of the following characteristics: a) Scope of practice area is linked to technologies used and changes by adoption of new technology into current practice; b) Practice area is located within a wider, complex context, requires teamwork, has interfaces with other parties and disciplines; c) Involve the use of a variety resources, including people, money, equipment, materials, technologies; d) Require resolution of occasional problems arising from interactions between wide-ranging or conflicting technical, engineering or other issues; e) Are constrained by available technology, time, finance, infrastructure, resources, facilities, standards and codes, applicable laws; f) Have significant risks and consequences in the practice area and in related areas.

Guidelines on Outcomes to be covered in the report Group A Outcomes: Engineering Problem Solving Outcome 1: Define, investigate and analyse broadly-defined engineering problems encountered in your work:
1.1 State how you interpreted the work instruction to the satisfaction of the client or your supervisor. (Acceptance criteria). 1.2 Describe how you analysed, obtained and evaluated further clarifying information, and if the instruction was revised as a result.

Outcome 2: Design or develop a solution to broadly-defined engineering problems encountered in your work:
2.1 Describe how you developed and analysed alternative approaches to do the work. Impacts checked. 2.2 State what the final solution to perform the work was, client or your supervisor in agreement

Outcome 3: Comprehend and apply the knowledge embodied in widely accepted and applied engineering procedures and processes, systems or methodologies and those specific to the jurisdiction in which you practise as applied in your work:
3.1 State what BTech level engineering procedures and systems you used to solve problems. 3.2 Give your reasons why the applications of these procedures are considered to be correct (Theoretical base). Report on the above:

Group B Outcomes: Managing Engineering Activities Outcome 4: Manage part or all of one or more broadly-defined engineering activities embodied in your work:
4.1 State how you managed yourself, priorities, processes and resources in doing the work. (bar chart). 4.2 Describe your role and contribution in the work team.

Outcome 5: Communicate clearly with others in the course of your engineering activity (broadly-defined engineering work):
5.1 State how you reported back after completion of the work. 5.2 State how you issued instructions to entities working on the same task. Report on the above:

Group C Outcomes: Impacts of Engineering Activity Outcome 6: Recognise and address the reasonable foreseeable social, cultural and environmental effects of your broadly defined engineering activity:
6.1 Describe the social and environmental impact of this engineering activity. 6.2 State how you communicated mitigating measures to affected parties.

Outcome 7: Meet all legal and regulatory requirements and protect the health and safety of persons in the course of your broadly-defined engineering activity:
7.1 List the major laws and regulations applicable to this particular activity. 7.2 State how you obtained advice in doing risk management for this work. Report on the above:

Group D Outcomes: Exercise judgement, take responsibility and act ethically Outcome 8: Conduct engineering activities ethically in executing your work:
8.1 State how you identified ethical issues and affected parties and their interest. 8.2 Confirm that you are conversant and in compliance with ECSAs Code of Conduct.

Outcome 9: Exercise sound judgement in the course of broadly-defined engineering activities encountered in your work:
9.1 State the factors applicable to the work, their interrelationship. 9.2 Describe how you foresaw work consequences and evaluated situations in the absence of full evidence.

Outcome 10: Be responsible for making decisions on part or all of broadly-defined engineering activities included in your work:
10.1 State what BTech level theory you applied to justify decisions taken in doing engineering work. 10.2 State how you took responsible advice on any matter falling outside your own education and experience. 10.3 Describe how you took responsibility for your own work and evaluated any shortcoming in your output. Report on the above:

Group E Outcome: Continued Professional Development Outcome 11: Undertake professional development activities sufficient to maintain and extend your competence.
Evidence of your competency development plan and independent learning ability must be given in the Initial Professional Development Report, Form B5

Signature of Applicant: ____________________________

Date:

Signature of Mentor / Supervisor: _____________________________ Name of Mentor / Supervisor (printed): Tel. No.:

Engineering Council of South Africa

(15/11/2012)

Form B2.2

SUMMARY
Surname and Initials:
Discipline of Engineering:

OF

EXPERIENCE REPORTS

PROFESSIONAL ENGINEERING TECHNOLOGISTS

(e.g. Elect/Civil/Mech etc.)

First complete a Form B2.1 for each period.

Period No: Dates (inclusive) From: To: Number of years and months Employer Post held Subject and type of work

Total years, months: Signature of Applicant: _________________________________________ Date: _________________________________

Engineering Council of South Africa

(15/11/2012)

Sheet B2.1

Information Sheet
for completion of the

Experience Report / Engineering Report / Education Development Report

1.1 Your application for registration as a Professional Engineering Technologist must be accompanied by the Experience Report (Forms B2.1) in which your engineering experience from the date of obtaining the first engineering qualification to the date of application is recorded in chronological order and typed or printed in black ink and minimum font size 10. If you have a BTech degree in Engineering, a minimum period of three years experience at professional technologist level of which at least one year must be in a position of responsibility, under the necessary supervision, is required. Use a separate form for each experience period and approximately 200 words per form. Number the periods in chronological order, which may not overlap. Cover the period from first graduation to date of application. Provide full details of work done during each period indicating your personal role and level of responsibility. This work will typically be of a higher level than an engineering technician, or a specified category, like lifting machinery inspector, medical equipment maintainer, etc.

An experience period ends when: 1.2. your work environment has changed, eg. when a major task or project has been completed; your type of work has changed; your responsibilities or level of function have changed (for instance, as in a promotion); you have changed employer; your experience is interrupted (for instance by study or prolonged illness).

The experience periods and periods of interruption must also be noted in the Summary of Experience Reports (Form B2.2). Ensure that each Form B2.1 is signed (verified) by your relevant supervisor or employer and signed by yourself. If you cannot obtain the supervisor's signature, or if you are the owner of your own business, please annotate accordingly in the appropriate block and submit an affidavit to the effect that the information provided is true and correct and give reasons why the supervisor signature cannot be obtained. Note that the Commissioner of Oaths stamp and signature is required on each experience report that is not signed by the supervisor. Please include an organogram for each experience period showing two levels above and two levels below you (if present) to indicate your degree of responsibility and the names, qualifications, job titles and registration categories of the persons indicated. The Experience Report (Form B2.1) must be set out in a way that clearly shows engineering knowledge applied (ultimately at BTech level) and responsibility carried by the applicant. It is incumbent on applicants to select and describe projects and tasks, which show their level of engineering knowledge and experience and clearly illustrates the applicant's own role and strategies devised to make these projects successful.

1.3.

1.4.

-2-

(15/11/2012)

Sheet B2.2

1.5.

The description of your work should highlight special skills and expertise that you used in engineering practice. Mention particular engineering procedures and methods, which you followed and how you applied specialised knowledge and expertise to solve problems in the course of your work. Representative sample copies of calculations, drawings or other relevant documents pertaining strictly to engineering work done by you, could be included only if essential to demonstrate your competence. Representative sample copies are adequate (not full documents). The documents must certify that you personally performed the work. Note that these documents should be A4 size and of a quality that would make clear copies, and that your complete application, including these documents, should not be more than 50 pages. The use of obscure jargon and acronyms (without index) which relates to highly specialised fields is not acceptable and may confuse the issue and result in requests for clarification with consequent delays in processing applications. All engineering experience, not only experience obtained after obtaining your highest qualification, must be submitted. For alternate route applicants, the experience reports must cover at least the last 10 years (if applicable). Describe any unique engineering development that you invented/developed and patents that you may hold. Also mention any engineering awards, commendations and prizes received and the dates these were received. It is essential that the information supplied relates to engineering. Other activities which pertain indirectly to engineering may be considered but measurement of quantities, attendance at meetings and unrelated functions are not relevant. Management activities, where mentioned, must contain predominantly engineering content. Use Form B2.3 to submit a recent engineering report, using at least BTech level knowledge, of 2500 to 3000 words in total on major engineering work completed by yourself. Under each group of outcomes the following evidence must be provided: The reports must be written for the purpose of your application. While the report may be on major engineering work or a series of projects they are reports in which you reflect on your engineering activities that demonstrate the required level of competence and the engineering responsibility delegated to you. The engineering report must be of a nature that is representative of the engineering work done illustrating your own role and strategies devised to make the task successful. You should indicate your level of delegated specific engineering responsibility, independent judgement and decisionmaking. Factors such as performance, economic evaluation, environmental and safety considerations, complexity of the task, interdisciplinary team working, financial implications and duration of the work have to be included. In addition the report should include the extent of your contribution to the engineering process such as conceptualisation, design and analysis, specification, tendering and adjudication, manufacturing, project and construction management, commissioning, maintenance, measurement and testing and planning. Your supervisor must sign the report. The minimum academic qualification required for registration as a professional engineering technologist is an ECSA accredited BTech Degree in Engineering or equivalent obtained from a South African University of Technology or Comprehensive University. Applicants not in possession of this qualification must submit a completed Educational Development Report using Form B18. Your attention is drawn to the signatures required on the last page of the Education Development Report.

1.6.

1.7.

1.8

1.9

1.10

2.1.

3.1

(15/11/2012)

Form B3

ENGINEERING COUNCIL OF SOUTH AFRICA SUID-AFRIKAANSE RAAD VIR INGENIEURSWESE

Private Bag X 691 BRUMA 2026 Tel: (011) 607-9500 Fax: (011) 622-9295 E-mail: [email protected] Website: www.ecsa.co.za

PROFESSIONAL ENGINEERING TECHNOLOGISTS

Name of Referee Address:

Date

Dear Sir / Madam I have applied to the Engineering Council of South Africa for Registration as a Professional Engineering Technologist and hereby request you to provide the Council with your evaluation of my experience and capabilities, on the basis of your personal knowledge thereof. Please use the attached Form B4 and consult the guideline for referees (Sheet B4). In making this request to you I acknowledge that the information which will be supplied by you to ECSA is of a confidential nature and that I have no right thereto. Your co-operation and early despatch of the document direct to the Council would be appreciated, as it would expedite the processing of my application. Thank you in advance for your co-operation.

Yours faithfully

.. Signature of Applicant

Name of Applicant

(Please print)

Address:

Postal Code:

Telephone No:

Cell No:

Engineering Council of South Africa Referee Report on an Application for Registration as Professional Engineering Technologist Form B4 (17/5/2012)
Applicants Name Referee Name:
ECSA Registration Category (e.g. PrTechEng):

Registration Number:

Referee Employer: My personal knowledge of the applicants achievements extends: My personal relationship with the applicant is: (Mark one block) My professional relationship with the applicant is, for the period shown: (Mark one block)

Referee Cell Phone No: Referee E-mail address: From: Unrelated Mentor By birth Supervisor Employer To: By marriage Colleague Client

Evaluation of the Applicants Competence or state of Development The level of competency required for registration as a Professional Engineering Technologist is defined in the Competency Standards, document R-02-PT. Competency is defined in terms of eleven outcomes and two level definitions, namely broadlydefined engineering problems and broadly-defined engineering activities. The applicant is expected to have demonstrated performance at a degree of responsibility appropriate to a Professional Engineering Technologist for at least one year. As a referee, you are requested to rate the applicant against the outcomes as well as make a holistic evaluation. Please use the following scale: CDC: The applicant consistently demonstrates competence CDI: The applicant demonstrated competence but not consistently CNDD: The applicant has not demonstrated competence but is developing CND: The applicant has not demonstrated competence X: I am unable to comment Please enter your comments in the third column, giving your reasons for assigning the particular rating. When a rating CDI, CNDD, or CND is given, please clearly state the reason(s) for assigning this rating Outcomes Group A: Engineering Problem Solving 1. Define, investigate and analyse broadly-defined engineering problems 2. Design or develop solutions to broadly defined engineering problems 3. Comprehend and apply the knowledge embodied in widely accepted and applied engineering procedures, processes, systems or methodologies and those specific to the jurisdiction in which he/she practices Group B: Management of Engineering Activities 4, Manage part or all of one or more broadly-defined engineering activities 5. Communicate clearly with others in the course of his or her engineering activities Group C: Impacts of Engineering Activity 6. Recognise and address the reasonable foreseeable social, cultural and environmental effects of broadly defined engineering activities 7. Meet all legal and regulatory requirements and protect the health and safety of persons in the course of his or her broadly-defined engineering activities 8. Conduct engineering activities ethically Group D: Exercise judgement, take responsibility 9. Exercise sound judgement in the course of broadlydefined engineering activities 10. Be responsible for making decisions on part or all of broadly-defined engineering activities Group E: IPD 11. Undertake professional development activities sufficient to maintain and extend his or her competence Rating Reason

Optional: Further comments or additional information on the Applicant:

Viewed Holistically: The applicant has demonstrated competence to be registered as a Professional Engineering Technologist

Declaration by Referee: I declare that the information provided is correct to the best of my knowledge. I hereby confirm
that I am conversant with the Councils requirements for registration as set out in Competency Standards, document R-02PT as well as the instructions on this referee report, and that I am prepared to substantiate my view expressed herein at an interview, should the Council require me to do so. I also confirm that I submit this information to ECSA on the understanding that it will be treated as confidential. I understand that the information will not be disclosed by ECSA unless required by law. Name of Referee: Title of Position held:

Signature of Referee: ________________________________________ Date:

Please post to:

The Chief Executive Officer Engineering Council of South Africa

Private Bag X691 BRUMA 2026

Engineering Council of South Africa

(15/11/2012)

Sheet B4

REFEREE GUIDELINE
for the Completion of the Referee Report

Professional Engineering Technologists

NOTE, from Sheet B1.2, paragraph 6: Each applicant must, with the permission of the persons concerned, supply the Council with the names and addresses of three referees, who have personal knowledge of the applicant's work. Referees must be registered with ECSA as a Professional Engineering Technologist or a Professional Engineer, and in exceptional circumstances a Professional Certificated Engineer or a Professional Engineering Technician, of which one must be a direct supervisor. In case of the supervisor not being registered with ECSA a forth registered referee must be provided. 1. COMPETENCY OF A PROFESSIONAL ENGINEERING TECHNOLOGIST Professional Engineering Technologists are persons who, by virtue of a combination of education, training and experience have attained a level of competence, which enables them to apply engineering principles and techniques to the solution of engineering challenges of varying complexity in industry. Their training and experience can be relatively broadly based but they may also have specialised in a narrow field. Their work may include research, development, design, commissioning, maintenance and any other activity which requires their level of competence. Their stature is such that they may be in a position of responsibility in industry or consulting engineering practice. Their decision making must be at an intellectual level requiring mature judgement, the ability to conceive, identify and optimise technical solutions beyond the mere comparison with accepted standards and norms. Implicit in the above is acceptance of full engineering responsibility for such decisions. 2. IMPLICATION OF REGISTRATION The individual subscribes to and will adhere to the professional Code of Conduct of the Act. As such he/she is required to accept legal responsibility for the soundness of the work executed and thereby affording protection to the public. 3. 3.1 COMPLETING THE REFEREE REPORT Aim The referee report is a necessary and supplementary document to the applicants application for registration as a Professional Engineering Technologist with ECSA. The aim is to convey to the Council, on a confidential basis, the personal knowledge that the referee or the employer has of the applicant and in the process to make a reasoned evaluation of the applicants capabilities. Motivation It is necessary that the referee or employer be able to clearly and strongly motivate his/her opinion in respect of the applicants readiness for registration. The referee must, when supplying reasons, consider the minimum legal registration requirements. When signing the referee report, referees declare that they are acquainted with Councils Competency Standards, document R-02-PT and ECSAs Rules of Conduct for Registered Persons (please refer to ECSAs website, www.ecsa.co.za), and that they are prepared to be interviewed by the Council to substantiate their viewpoint, should Council require them to do so. 3.3 Evaluation The referee must carefully evaluate the applicants capabilities. This report is not a character study. An evaluation of the candidates ethical and professional competence is required. Referees should have a personal knowledge of an applicant and his/her work and they should be able to give a professional opinion on his/her engineering ability, level of engineering responsibility and professional conduct during the period of time of their knowledge of the applicant's activities. The referee must carefully evaluate the applicants capabilities and correctly and accurately complete the report as Council attaches great value to the information, which is supplied by the referee. 4. GENERAL The Referee Report should be returned directly to ECSA by the referee. Referees are requested to have their assessments typed. 5. CONFIDENTIALITY ECSA undertakes to protect the confidentiality of all the information received from the referee.

3.2

Engineering Council of South Africa

(15/11/2012)

Form B5

Professional Engineering Technologists INITIAL PROFESSIONAL DEVELOPMENT REPORT (IPD)

See enclosed Information Sheet (Sheet B5)

Name:

Discipline:
Itemise courses, workshops, conferences, symposia or congresses attended.

List these under the separate headings of engineering, management and computer courses.
Name or subject of item Course Provider Dates attended Duration in hours For use of Assessor

Engineering Courses

Management Courses

Computer Courses

__________________________________ Signature of Applicant

Date

Engineering Council of South Africa

(15/11/2012)

Sheet B5

Information Sheet
for completion of the

Initial Professional Development Report (Form B5)

This form must be completed by all persons applying for registration as a Professional Engineering Technologist.

1.

Initial Professional Development (IPD) is defined as the ongoing studies and development of engineering knowledge required to keep abreast of new technologies. The Registration Committee aims to gauge to what extent applicants kept abreast with engineering and technical developments in their fields of expertise subsequent to obtaining their qualifications. Details of additional engineering courses and engineering subjects done at tertiary institutions are required. List other engineering courses, seminars, conferences, symposia, workshops etc. that were attended. Please provide dates [year] attended and duration of the course in days or hours. Please indicate whether you were required to sit a written examination at the conclusion of other engineering courses. Also provide detail of papers delivered at engineering seminars, conferences, symposia, workshops, overseas study tours, etc. It is not required that copies of certificates relating to relatively minor seminars or courses form part of the application.

2.

3.

4.

Engineering Council of South Africa

(15/11/2012)

Form B18

EDUCATIONAL DEVELOPMENT REPORT

A INSTRUCTIONS 1. Applicants not in possession of an ECSA accredited B Tech (Eng) should complete this work based (experience) learning report. WRITE A REPORT IN ABOUT 100 WORDS ON EACH CRITERION LISTED. 2. Reports must include reference to broadly-defined practical examples in the work place demonstrating how the competencies were satisfied. (Additional supporting evidence may be attached, if necessary). 3. This information can be provided from education or experience, or a combination of both. 4. The applicant must sign the completed report and also obtain a signature from his/her supervisor. 5. The applicant may be invited to an interview to expand and/or confirm this report. Broadly-defined engineering problems have the following characteristics: (a) require coherent and detailed engineering knowledge underpinning the applicable technology area; and one or more of: (b) are ill-posed, under- or over specified, requiring identification and interpretation into the technology area; (c) encompass systems within complex engineering systems; (d) belong to families of problems which are solved in well-accepted but innovative ways; and one or more of: (e) can be solved by structured analysis techniques; (f) may be partially outside standards and codes; must provide justification to operate outside; (g) require information from practice area and sources interfacing with practice area that is complex and incomplete; (h) involves a variety of issues which may impose conflicting constraints: technical, engineering and interested or affected parties. APPLICANTS PERSONAL DETAILS Name: Technical Qualifications:

B.

EDUCATIONAL DEVELOPMENT REPORT (OUTCOMES BASED, DURING WORK EXPERIENCE)

Exit Level Outcome 1. The applicant displays understanding of and the ability to apply the fundamentals of engineering in a selected sub-discipline together with the underpinning fundamentals of mathematics and natural science. Item 1.1 Criteria State what mix of mathematical, natural science and engineering knowledge you applied in the solution of the broadly-defined engineer-ing problem. State which theories and principles were used. Describe how you analysed and modelled the engineering materials, components, systems or processes used and provide the motivation for the specific selection. Describe the procedures applied for dealing with uncertainty and risk applicable to your own theoretical limitations and the use of specialists to do the work. Development Report

1.2

1.3

Page 19

Exit Level Outcome 2. The applicant displays proficiency in engineering specialist fields of a selected engineering sub-discipline at the exit level. Item 2.1 Criteria Describe how you analysed and defined a problem and identified the engineering knowledge and skills required for solving the problem. Describe how you generated possible solutions to the problem and how they were modelled, analysed and prioritised. State how you selected, formulated and presented the preferred solution. Development Report

2.2

2.3

Exit Level Outcome 3. The applicant displays proficiency in the use of engineering tools and IT support appropriate to the sub-discipline. Item 3.1 Criteria Describe how you assess the method, skill or tool (including computer applications) for applicability to solving problems. Describe how you applied the method, skill or tool correctly to achieve the required result, and how this tested against the required results. Development Report

3.2

Exit Level Outcome 4. The applicant demonstrates design proficiency through substantial project work. The design problem meets the requirements of a broadly-defined engineering problem and the design approach is properly structured. Item 4.1 Criteria Describe how you formulated the design problem and how the design process was managed. Describe how user needs, legislation, standards and resources were acquired and evaluated. Describe how you performed the design task, selecting a preferred solution out of alternatives, subject to relevant premises, assumptions and constraints. Describe how the selected design was evaluated in terms of impact and benefits and how this information was communicated in an engineering report. Development Report

4.2

4.3

4.4

Exit Level Outcome 5. The applicant displays proficiency in experimental or investigative and information handling methodology Item 5.1 Criteria Describe the plan you devised to perform the investigation stating what information was used. Development Report

Page 20

Item 5.2

Criteria Describe the methodology you used to perform the analysis stating how the equipment and/or software was selected and used. From the data available, describe how information was derived, critically analysed and interpreted to reach conclusions. Describe how the purpose, process and outcomes of the investigation are recorded in an engineering report.

Development Report

5.3

5.4

Exit Level Outcome 6. The applicant communicates in writing at the exit level of a BTech programme No entry required. Assessment will be done against evidence submitted in item 5 of the Engineering Report (Form B2.3). Exit Level Outcome 7. The applicant explains and analyses impacts of engineering technologies of the subdiscipline. No entry required. Assessment will be done against evidence submitted in item 6 of the Engineering Report (Form B2.3). Exit Level Outcome 8. The applicant explains ethical principles and analyses ethical issues. No entry required. Assessment will be done against evidence submitted in item 8 of the Engineering Report (Form B2.3). Additional requirements Demonstrate knowledge and understanding of engineering management principles and apply these to ones own work, as a member and leader in a team and to manage projects. No entry required. Assessment will be done against evidence submitted in item 4 of the Engineering Report (Form B2.3). Engage in independent and life-long learning through well-developed learning skills. No entry required. Assessment will be done against evidence submitted in the Initial Professional Development Report (Form B5).

Signature of Applicant: _________________________Date:

Signature of Mentor / Supervisor: ___________________________________ Name of Mentor / Supervisor (printed): Tel. No.:

Page 21

(15/11/2012)

Before the Application Form is submitted to the Engineering Council please make sure that the following points have been checked and included:
1. 2. 3. Application fee of R ____________________. First page of Application Form is initialled by the applicant and Commissioner of Oaths. Second page of Application Form is signed by applicant, signed and stamped by the Commissioner of Oaths.

4.

The names of a minimum of three referees have been given.

[The referee reports (Forms B4) must be sent under separate cover and the people chosen must be registered as either a Professional Engineer or a Professional Engineering Technologist. One report must be from a supervisor. If your supervisor is not registered with ECSA, four referee reports are required. Referee reports from your supervisors are preferable, and they should have played some mentoring or supervisory role in your career development.]

5. 6.

A photograph has been attached to Application Form B1.1. Experience Reports covering ALL the experience gained completed on the forms provided (Forms B2.1 and B2.2). For alternate route candidates, for at least the last ten years.
(Photocopies of the blank forms may be made.)

7. 8.
9.

Signatures of applicant on each Experience Report. Signatures of employer on each Experience Report.
If the applicant has his own business or signatures are unobtainable, the experience report must be accompanied by a Sworn Affidavit providing reasons for not obtaining the signature and stating that the information is true and correct, i.e. the Commissioner of Oaths must stamp and sign each experience report form.

10.

Organograms for the respective positions held by applicant signed by applicant and employer - Period and position (post held) must be indicated. One Engineering report (paragraph 2.1 of Sheet B2.2) indicating the applicants own contribution/role and responsibility in his/her work, signed by a supervisor. Certified copies of certificates, diplomas, degrees, etc. Completed Form B1.3 one for each qualification, where applicable. Proof of membership of Voluntary Associations must be provided, where applicable. Details of your Initial Professional Development (IPD) (using Form B5). If you are not in possession of the BTech degree awarded by an ECSA accredited university of technology, the completed and signed Educational Development Report (Form B18). Ensure that your Application does not exceed 50 pages in total.

11.

12. 13. 14. 15. 16.

17.

Page 22

Addendum A
(27 March 2012)

Voluntary Associations
recognised in terms of section 25(3) of the Engineering Profession Act, 2000 (Act No. 46 of 2000)
These Voluntary Associations applied for recognition in terms of section 36(1) of the Engineering Profession Act, 2000 (Act 46 of 2000) and were recognised by the Council in terms of Section 25(3) of the above Act. One of the benefits of recognition is that registered members of a Recognised Voluntary Association (Categories A and B only) enjoy partial exemption from payment of their ECSA annual fees. Expiry date for these voluntary associations below is five (5) years from the date of recognition. These Acronyms appear in alphabetically order for ease of reference.

Category A
No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Acronym AeSSA AMMSA AMRE CEASA COET CSSA ICMEESA IEEE IMESA IPET LIASA NSBE SAAMA SACEA SACMA SAIAE SAICE SAIChE SAIEE SAIIE SAIMechE SAIMENA SAIMM SAIRAC SAT STE Name Aeronautical Society of South Africa Association of Mine Managers of South Africa Association of Mine Resident Engineers Clinical Engineering Association of South Africa The Chamber of Engineering Technology Concrete Society of Southern Africa Institution of Certificated Mechanical and Electrical Engineering Institute of Electrical and Electronic Engineers South African Section Institution of Municipal Engineering of Southern Africa Institute of Professional Engineering Technologists Lift Inspectors Association of South Africa National Society of Black Engineers South African Asset Management Association South African Colliery Engineers' Association South African Colliery Managers Association South African Institute of Agricultural Engineers South African Institution of Civil Engineering South African Institution of Chemical Engineers South African Institute of Electrical Engineers Southern African Institute of Industrial Engineers The South African Institution of Mechanical Engineering South African Institute of Marine Engineers and Naval Architects South African Institute of Mining and Metallurgy South African Institute of Refrigeration and Air-Conditioning Society for Asphalt Technology Society of Telkom Engineers Reference Number VA A0022 VA A0031 VA A0032 VA A0040 VA A0001 VA A0019 VA A0002 VA A0036 VA A0003 VA A0004 VA A0026 VA A0037 VA A0025 VA A0005 VA A0029 VA A0020 VA A0006 VA A0007 VA A0008 VA A0009 VA A0021 VA A0010 VA A0011 VA A0028 VA A0043 VA A0035 Date Recognised 11 August 2011 24 January 2007 30 November 2007 26 August 2010 19 October 2010 11 August 2011 24 November 2010 12 June 2008 14 April 2011 19 October 2010 15 March 2012 12 June 2008 14 May 2009 11 August 2011 24 January 2007 11 August 2011 24 November 2010 11 August 2011 14 April 2011 11 August 2011 14 April 2011 11 August 2011 14 April 2011 24 January 2007 26 August 2010 12 June 2008

Page 23

Category B
Acronym 27 28 29 30 SAFHE SAID SAIMC WISA Name South African Federation of Hospital Engineers South African Institute of Draughting South African Institute of Measurement and Control Water Institute of Southern Africa Reference Number VA B0023 VA B0033 VA B0024 VA B0038 Date Recognised 11 April 2011 30 November 2007 11 August 2011 12 June 2008

Category C
Acronym 31 32 33 34 35 AMEU BEPEC CESA IESSA INCOSE IQSA ITC SAFA SAFCEC SAFPA SAISC SAIW SARF SASTT Name Association of Municipal Electricity Undertakings Built Environment Professions Export Council Consulting Engineers South Africa (p.n.a. SAACE) Illumination Engineering Society of South Africa International Council of Systems Engineering (SA Chapter) Institute of Quarrying Southern Africa Institute for Timber Construction South African Flameproof Association South African Federation of Civil Engineering Contractors South African Fluid Power Association South African Institute of Steel Construction South African Institute of Welding South African Road Federation Southern African Society for Trenchless Technology Reference Number VA C0027 VA C0044 VA C0013 VA C0012 VA C0030 VA C0014 VA C0015 VA C0016 VA C0017 VA C0039 VA C0018 VA C0034 VA C0042 VA C0041 Date Recognised 11 August 2011 24 November 2010 14 April 2011 11 August 2011 24 January 2007 11 August 2011 11 August 2011 26 August 2010 11 August 2011 26 November 2008 11 August 2011 30 November 2007 26 August 2010 26 August 2010

36 37 38 39 40 41 42 43 44

Please note:

Proof of membership must be submitted.

Page 24

Notes:
(1) Annual fees are payable by all persons registered for as long as they are registered with ECSA. In the first year a pro rata annual fee from the date of registration to the end of March will be raised. Thereafter annual fees are raised every year for the period April to March. Registered persons should ensure that they keep their contact details up to date with ECSAs Accounts department. If they have not received their annual fee invoice by the end of April every year, they should enquire with [email protected]. The accepted methods of payment are either by cheque from a RSA bank, credit card (Visa or MasterCard only), EFT or deposit made at any Standard Bank branch into ECSAs bank account. No cash will be accepted at ECSAs Offices. Banking details: Standard Bank Eastgate Branch, Branch Code 018505, Account No. 221285938. Swift code SBZAZAJJ. Please be aware that it is risky to send cheques by post. ECSA will take no responsibility for cheques lost in the post or intercepted and fraudulently banked in another partys bank account. Registered persons and applicants, if making payment by EFT, must ensure that the registration/application number is quoted in the beneficiary reference number field. If wishing to supply the name as well, please ensure that the number is quoted first to prevent part of the number being cut off at the end. If an application for registration is withdrawn before it is considered by a committee, 50% of the application fee will be forfeited to cover administrative expenses. Once the application has been considered by a committee and then rejected, the full application fee is forfeited. Applications for foreign qualification assessment or for registration will not be considered until payment for the full application fee has been received. Persons registered in the Candidate category for more than six (6) years pay the same annual fees as persons registered in the Professional category. Appeals. When a person wishes to appeal, a fee equalling twice the amount of the application fee that was payable by the applicant when applying for registration, will be payable. Partial or full exemptions: a. Persons applying for registration with ECSA after having had their Foreign Qualification successfully evaluated will receive a 50% of their Foreign Qualification fee offset against their registration application fee. b. Registered persons who are members in good standing of any Voluntary Associations (VAs) listed in Categories A or B of the Recognised Voluntary Associations per www.ecsa.co.za will qualify for partial exemption of annual fees on condition that membership to the VA occurs by 30 May of that year. c. Registered persons between the age of 55 and 70 who are retired and who do not receive income from work connected to the engineering profession amounting to more than 30 hours per month or 300 hours per annum qualify for a discounted annual fee. They may enquire from [email protected] how to apply for the exemption. d. Registered persons who are overseas on a permanent basis (SADC countries excluded) may qualify for a discounted annual fee. They may enquire from [email protected] how to apply for the exemption. e. Persons over 70 are exempted fully from annual fees.
Page 25

(2)

(3)

(4) (5) (6) (7)

(8) (9)

(10)

(11) (12)

(13) (14)

(15)

Full time students are fully exempt from annual fees. They need to apply every year in April for continued exemption by supplying proof from their tertiary institution that they are still full time students. g. An Early bird discount is granted to Registered persons if their annual fees for April to March is paid on or before 30 June. The discount is R50 for candidates and R100 for Professionals, VAT inclusive. h. The onus is upon the Registered person to apply with ECSAs Accounts department for any exemption if not automatically granted. Backdated exemptions for previous years will not be granted. Persons who only qualify for exemption after 31 May, i.e. reaching the age of 70, going on retirement or becoming a member of a recognised VA, will only qualify for the exemption in the following year. Registered persons who are unemployed may enquire from [email protected] for extension of the payment of their annual fees. Exemption will be considered upon request if the Registered person is still unemployed at the end of March every year. Registered persons should be aware of the fact that their registrations will currently not be cancelled if they have not been able to obtain their CPD points within the required time. Should they on the other hand not pay their annual fees in time, and they have not made any arrangements with Accounts for extension, their registrations will most definitely be cancelled. Once the registration of Registered persons is cancelled due to non-payment, and reinstatement is requested within twelve months from cancellation, an admin fee of R450, in addition to the annual fees in arrear, is payable. After one year of being cancelled persons will need to re-apply for registration. The normal application fees would then be raised in addition to the annual fees still owing. The re-application process is fortunately much simpler than the original process. Persons who will be residing outside the RSA borders for a year or longer should advise Accounts of their overseas postal address in order for VAT to be removed from their invoice. Invoices will still be emailed to that person. Annual fees cannot be frozen whilst working abroad. The Registered person has two choices: continue paying annual fees whilst abroad or to request cancellation of registration. If the Registered person is planning to return to the RSA after a few years it would probably be cheaper and inconvenient not to cancel his or her registration. Should a person cancel his or her registration, an application for re-registration and the application fee awaits that person when wishing to re-register. In addition to that, if the person wishes to retain his or her old registration number, all annual fees from date of cancellation up to the current year are payable. If the person opts for a new registration number, he or she would only be required to pay the application fee, plus any possible fees owing from the year of cancellation and th e current years annual fee. Registered persons, if their employer is willing to pay ECSAs annual fee for its employees, should advise Accounts of their employers official name and address plus VAT number for inclusion on the invoice. Annual fees invoices can be sent to the employer directly for payment. If that is the arrangement, the Registered person will not receive an invoice. He or she would receive a statement of account, as evidence of the charge raised against the employer. Should the Registered person not agree with the charge, he or she should advise their employer not to pay the invoice. The Registered person must take up the wrong charge with Accounts and request a correction. Once the problem is resolved, Accounts will issue a revised invoice. Registered persons should not present the statement of account to the employer for payment. Employers do not pay on statement. They should already have the invoice. The fee for persons between the ages of 55 and 70 who have been granted the retired dispensation will be R160 (VAT inclusive).

f.

Page 26

ENGINEERING COUNCIL
Private Bag X 691 BRUMA 2026 Tel: (011) 607-9500 Fax: (011) 622-9295 Email: [email protected] Website: www.ecsa.co.za

OF

SOUTH AFRICA
Waterview Corner, 1 Floor, 2 Ernest Oppenheimer Avenue Bruma Lake Office Park BRUMA Johannesburg 2198
st

DISABILITY REGISTER
Disability is defined as: Persons with disabilities including those who have long-term physical, intellectual or sensory impairments which in interaction with various barriers may hinder their full and effective participation in society on an equal basis with others.

Registration Number: ___________________________________________

Name & Surname: ______________________________________________

Do you have any disability (Please tick): Yes No

If yes, state nature of Disability:

____________________________________________________
NB: Completion of this form is necessary in order to accurately reflect disability statistics in terms of Government Policy.

Page 27