Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Flocfast 50 Anionic

    Uploaded by

    Nimit Sheth
    Polyelectrolyte powder used for effluent treatment for the product contact me on [email protected]

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Flocfast 50 Anionic

    Uploaded by

    Nimit Sheth
    35 views2 pages
    Polyelectrolyte powder used for effluent treatment for the product contact me on [email protected]

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Polyelectrolyte powder used for effluent treatment for the product contact me on [email protected]

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views2 pages

    Flocfast 50 Anionic

    Uploaded by

    Nimit Sheth
    Polyelectrolyte powder used for effluent treatment for the product contact me on [email protected]

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FLOC FAST 50

    Anionic Poly-acrylamide
    FLOC FAST 50 is a medium molecular weight anionic Polyacrylamide coagulant cum flocculant which works
    effectively as a flocculation aid or sludge conditioning agent in numerous solid-liquid separation processes. Advantages: Economical to use- Effective at very low dosage levels, resulting in reduced handling and storage cost. Works over a wide pH range and does not alter pH in the system. Larger, faster-settling flocs are formed in gravity settling operations. Increased filtration rates and drier cakes are produced in filtration process. Sludges contain less ash when incinerated. Higher solids capture, increased clarity, and greater throughput are attained in centrifugation. Air flotation operation produces clearer underflows and greater throughput.

    Principal uses: Industrial Waste Treating Clarification of waste water or dewatering sludges from: Metal finishing Pulp and paper manufacturer Brewing Leather tanning Soap and detergent manufacturer Glass and ceramic production Synthetic rubber production Industrial Water Treatment Clarification industrial raw water, often in conjunction with inorganic such as alum. Meat packing Oil refining Textile processing Chemical processing Aluminum, Steel processors Paint manufacturer

    Municipal Waste Treatment Raw sewage settling. Clarification of primary and secondary effluents. Alum sludge dewatering. Polishing and phosphate removal process in tertiary treatment.

    Application:

    FLOC FAST 50 should be dissolved in fresh water under low agitation to make 0.01% to 0.05% solution.
    Complete dissolution takes about 60 to 90 minutes, but will be faster in warm water. However avoid temperature above 500C. Stock solution is stable for at least 3 to 4 days. Avoid turbulent mixing condition in the process stream after any grade of our anionic poly electrolyte has been added. Treatment Levels: For use as: Flocculant Coagulant aid Filtration aid Sludge dewatering Typical properties: Chemical composition Appearance Ionicity Bulk Density ( gr / ml ) pH of solution ( 250C ) 0.1% Viscosity ( cps* at 250C ) Solution % 0.1 0.25 0.5 * Brookfield Handling: Spilled polymer is very slippery. Spills should be scooped and or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air. Note: The information presented here is based on best of our present knowledge. However should not be considered as guarantee of any specific property or product as a hole Polyacrylamide White Granule Anionic 0.75 6.5 0.6 ~ 4.0 ppm 0.1 ~ 3.0 ppm 0.05 ~ 2.0 ppm 0.1 ~ 0.2 % Dry solid

    260 400 1,000

    You might also like