S54721 A
S54721 A
S54721 A
S54721 Rev. A 10/08 For Date Codes Beginning with the Letter A
Note: This illustration is for reference only. The appearance of your unit may differ from the unit shown.
Handle Assembly See Figure 18 Pump Sub-assemblies and Sub-components See Figures 3 through 12
NOTE: This illustration is for reference only. The appearance of your unit may differ from unit shown. Testing Procedure: Load the jack to full rated capacity, hold and check. No drift allowed. Lift 3.25-2.25" @ 1 minute. Lower and check load holding .31" drift max. before load lock off.
Pump Assembly Specifications Tonnage: 60 Tons Pressure Relief set: 5800-6000 psi Unloading Pressure: 800 psi
11
12
13
14
15
16
17
&