Scribd Logo
Upload

Welcome to Scribd!

  • 213 views

    Poynting OMNI A0098 Brochure

    Uploaded by

    kaminare
    This document summarizes the specifications and features of the OMNI-A0098 active monitoring antenna from 20-6000 MHz. It has a gain of 360 degrees with beamwidths of 60 degrees and 2.5 degrees azimuth ripple. It operates from -40 to 65 degrees Celsius and is IP63 rated. Key features include ultra wide bandwidth, robust design, and protection from excessive field strengths while boosting low level signals. It is suitable for vehicle and mast mounting for applications like spectrum monitoring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Poynting OMNI A0098 Brochure

    Uploaded by

    kaminare
    213 views2 pages
    This document summarizes the specifications and features of the OMNI-A0098 active monitoring antenna from 20-6000 MHz. It has a gain of 360 degrees with beamwidths of 60 degrees and 2.5 degrees azimuth ripple. It operates from -40 to 65 degrees Celsius and is IP63 rated. Key features include ultra wide bandwidth, robust design, and protection from excessive field strengths while boosting low level signals. It is suitable for vehicle and mast mounting for applications like spectrum monitoring.

    Original Description:

    brochure

    Original Title

    20121114105148_Poynting-OMNI-A0098-Brochure

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications and features of the OMNI-A0098 active monitoring antenna from 20-6000 MHz. It has a gain of 360 degrees with beamwidths of 60 degrees and 2.5 degrees azimuth ripple. It operates from -40 to 65 degrees Celsius and is IP63 rated. Key features include ultra wide bandwidth, robust design, and protection from excessive field strengths while boosting low level signals. It is suitable for vehicle and mast mounting for applications like spectrum monitoring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    213 views2 pages

    Poynting OMNI A0098 Brochure

    Uploaded by

    kaminare
    This document summarizes the specifications and features of the OMNI-A0098 active monitoring antenna from 20-6000 MHz. It has a gain of 360 degrees with beamwidths of 60 degrees and 2.5 degrees azimuth ripple. It operates from -40 to 65 degrees Celsius and is IP63 rated. Key features include ultra wide bandwidth, robust design, and protection from excessive field strengths while boosting low level signals. It is suitable for vehicle and mast mounting for applications like spectrum monitoring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Active Monitoring Antenna

    20 6000 MHz Product Code: OMNI-A0098


    SPECIFICATIONS:
    Product code: OMNI-A0098-01 OMNI-A0098-02 Active antenna with passive bypass and single N-type female connector Passive antenna with two N-type female connectors

    VERSION: 3.4

    Electrical: Frequency range*: Gain Nominal H-plane 3 dB beamwidth Nominal E-plane 3 dB beamwidth Azimuth ripple (RMS) VSWR (typ.) Polarisation RF power rating Connector type Input voltage (via coaxial cable.) Input current OP1dB (typ.) (in active mode) OIP2 (typ.) (in active mode) OIP3 (typ.) (in active mode) Sensitivity OMNI-A0098-01 active/passive mode switching cycles. Mechanical: Height Weight Environmental: Operating temperature Storage temperature UV stability Operational rainproof Operational humidity Wind velocity (no ice) Sand and dust resistant Band A: 20 1000 MHz Band B: 1000 6000 MHz See figures 1 & 2 360 60 Band A: 1.5 dB Band B: 2.5 dB < 2:1 Linear, vertical Receive only N-type female 13 24 VDC < 150 mA 11 dBm 31 dBm 21 dBm See figure 3 Min 106 (at 20 cpm)

    720 mm x 340 mm < 8.5 kg

    PRODUCT FEATURES: Ultra wideband 20 to 6000 MHz Protected against excessive field strengths Very good sensitivity Low profile compared to passive alternatives Robust IP63 APPLICATION AREAS: General spectrum monitoring Suitable for vehicle mount and mast mount applications Internal limiter allow operation in adverse EMC environments RELATED PRODUCTS: MISC-A0022 power supply OMNI-A0107 compact VP active monitoring antenna OMNI-A0156 HP active monitoring antenna

    -40 C to +65 C -55 C to +85 C Yes Yes 95% at +25 C and +55 C 180 km/h Yes 10 Hz 300 Hz: 0.01 g2/Hz Vibration 300 Hz 500 Hz: 0.03 g2/Hz Mechanical shock 40 g @15 ms all axis Indirect lightning survival Yes Salt fog Yes. 47 C with 5% NaCl solution * OMNI-A0098-01 bands A and B are internally combined

    PRODUCT DESCRIPTION: This vertically polarised omni-directional antenna consists of an active antenna array, covering 20 to 6000 MHz. The antennas are combined under 1 compact radome and output in a single connector (except the -02 version). The active part of the antenna protects the system from excessive field strengths and boosts low level signals. The active version of this antenna rely on DC power injection on the output port of the antenna. The antenna is best utilised with the MISC-A0022 power supply for this purpose. The OMNI-A0098-01 features a passive-bypass mode which is engaged when the antenna is not powered. In this mode, the antenna is completely passive, allowing for low distortion measurements in the presence of high incident fields. The antenna, when paired with the OMNI-A0156 or OMNI-A0100 horizontally polarised omni-directional monitoring systems, provide full spectrum coverage for diverse SIGINT requirements.

    [email protected]

    www.poynting.co.za
    PAGE 1 of 2
    Poynting Antennas has a policy of continuous improvement and hence specifications may change without notice

    Active Monitoring Antenna


    20 6000 MHz Product Code: OMNI-A0098
    GAIN: VERSION: 3.4

    Figure 1: Measured gain (OMNI-A0098-01)

    Figure 2: Measured gain (OMNI-A0098-02)

    SENSITIVITY:

    E-field required for a 12-dB NF receiver, 1Hz bandwidth and 0dB SNR 0 Active Passive Bypass -5

    -10

    -15
    E-field strength [dBuV/m]

    -20

    -25

    -30

    -35

    -40

    -45

    -50

    10

    10 Frequency [MHz]

    Figure 3: OMNI-A0098 E-field strength required for 12 dB NF receiver, 1 Hz bandwidth and 0 dB SNR (includes external noise in urban environment)

    [email protected]

    www.poynting.co.za
    PAGE 2 of 2
    Poynting Antennas has a policy of continuous improvement and hence specifications may change without notice

    You might also like