Scribd
Upload
305 views

Process Introduction

IDC Technologies is a specialist in the field of industrial communications, telecommunications, automation and control. IDC consists of an enthusiastic team of professional engineers and support staff who are committed to providing the highest quality in their consulting and training services.

Uploaded by

Lunokhod Rover
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
305 views

Process Introduction

IDC Technologies is a specialist in the field of industrial communications, telecommunications, automation and control. IDC consists of an enthusiastic team of professional engineers and support staff who are committed to providing the highest quality in their consulting and training services.

Uploaded by

Lunokhod Rover
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Presents

Practical

Process Control
For Engineers and Technicians

Web Site: http://www/idc-online.com E-mail: [email protected]

IDC Technologies

Technology Training that Works

Introduction This manual and associated courses were prepared by a fine professional engineer, Wolfgang Altmann who was a wonderful friend and accomplished practitioner in process control.

Copyright All rights to this publication, associated software and workshop are reserved. No part of this publication or associated software may be copied, reproduced, transmitted or stored in any form or by any means (including electronic, mechanical, photocopying, recording or otherwise) without prior written permission of IDC Technologies. Disclaimer Whilst all reasonable care has been taken to ensure that the descriptions, opinions, programs, listings, software and diagrams are accurate and workable, IDC Technologies do not accept any legal responsibility or liability to any person, organization or other entity for any direct loss, consequential loss or damage, however caused, that may be suffered as a result of the use of this publication or the associated workshop and software. In case of any uncertainty, we recommend that you contact IDC Technologies for clarification or assistance. Trademarks All terms noted in this publication that are believed to be registered trademarks or trademarks are listed below: IBM, XT and AT are registered trademarks of International Business Machines Corporation. Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.

Acknowledgements
IDC Technologies expresses its sincere thanks to all those engineers and technicians on our training workshops who freely made available their expertise in preparing this manual.

IDC Technologies

Technology Training that Works

Who is IDC Technologies?


IDC Technologies is a specialist in the field of industrial communications, telecommunications, automation and control and has been providing high quality training for more than six years on an international basis from offices around the world. IDC consists of an enthusiastic team of professional engineers and support staff who are committed to providing the highest quality in their consulting and training services.

The Benefits to you of Technical Training Today


The technological world today presents tremendous challenges to engineers, scientists and technicians in keeping up to date and taking advantage of the latest developments in the key technology areas.
The immediate benefits of attending IDC workshops are: Gain practical hands-on experience Enhance your expertise and credibility Save $$$s for your company Obtain state of the art knowledge for your company Learn new approaches to troubleshooting Improve your future career prospects

The IDC Approach to Training


All workshops have been carefully structured to ensure that attendees gain maximum benefits. A combination of carefully designed training software, hardware and well written documentation, together with multimedia techniques ensure that the workshops are presented in an interesting, stimulating and logical fashion. IDC has structured a number of workshops to cover the major areas of technology. These courses are presented by instructors who are experts in their fields, and have been attended by thousands of engineers, technicians and scientists world-wide (over 11,000 in the past two years), who have given excellent reviews. The IDC team of professional engineers is constantly reviewing the courses and talking to industry leaders in these fields, thus keeping the workshops topical and up to date.

IDC Technologies

Technology Training that Works

Technical Training Workshops


IDC is continually developing high quality state of the art workshops aimed at assisting engineers, technicians and scientists. Current workshops include:
INSTRUMENTATION & CONTROL Practical Automation and Process Control using PLCs Practical Data Acquisition using Personal Computers and Standalone Systems Practical On-line Analytical Instrumentation for Engineers and Technicians Practical Flow Measurement for Engineers and Technicians Practical Intrinsic Safety for Engineers and Technicians Practical Safety Instrumentation and Shut-down Systems for Industry Practical Process Control for Engineers and Technicians Practical Programming for Industrial Control using (IEC 1131-3;OPC) Practical SCADA Systems for Industry Practical Boiler Control and Instrumentation for Engineers and Technicians Practical Process Instrumentation for Engineers and Technicians Practical Motion Control for Engineers and Technicians Practical Communications, SCADA & PLCs for Managers COMMUNICATIONS Practical Data Communications for Engineers and Technicians Practical Essentials of SNMP Network Management Practical FieldBus and Device Networks for Engineers and Technicians Practical Industrial Communication Protocols Practical Fibre Optics for Engineers and Technicians Practical Industrial Networking for Engineers and Technicians Practical TCP/IP & Ethernet Networking for Industry Practical Telecommunications for Engineers and Technicians Practical Radio & Telemetry Systems for Industry Practical Local Area Networks for Engineers and Technicians Practical Mobile Radio Systems for Industry ELECTRICAL Practical Power Systems Protection for Engineers and Technicians Practical High Voltage Safety Operating Procedures for Engineers & Technicians Practical Solutions to Power Quality Problems for Engineers and Technicians Practical Communications and Automation for Electrical Networks Practical Power Distribution Practical Variable Speed Drives for Instrumentation and Control Systems PROJECT & FINANCIAL MANAGEMENT Practical Project Management for Engineers and Technicians Practical Financial Management and Project Investment Analysis How to Manage Consultants MECHANICAL ENGINEERING Practical Boiler Plant Operation and Management for Engineers and Technicians Practical Centrifugal Pumps Efficient use for Safety & Reliability ELECTRONICS Practical Digital Signal Processing Systems for Engineers and Technicians Practical Industrial Electronics Workshop Practical Image Processing and Applications Practical EMC and EMI Control for Engineers and Technicians INFORMATION TECHNOLOGY Personal Computer & Network Security (Protect from Hackers, Crackers & Viruses) Practical Guide to MCSE Certification Practical Application Development for Web Based SCADA

IDC Technologies

Technology Training that Works

Comprehensive Training Materials


Workshop Documentation All IDC workshops are fully documented with complete reference materials including comprehensive manuals and practical reference guides.

Software
Relevant software is supplied with most workshop. The software consists of demonstration programs which illustrate the basic theory as well as the more difficult concepts of the workshop.

Hands-On Approach to Training


The IDC engineers have developed the workshops based on the practical consulting expertise that has been built up over the years in various specialist areas. The objective of training today is to gain knowledge and experience in the latest developments in technology through cost effective methods. The investment in training made by companies and individuals is growing each year as the need to keep topical and up to date in the industry which they are operating is recognized. As a result, the IDC instructors place particular emphasis on the practical hands-on aspect of the workshops presented.

On-Site Workshops
In addition to the quality of workshops which IDC presents on a world-wide basis, all IDC courses are also available for on-site (in-house) presentation at our clients premises. On-site training is a cost effective method of training for companies with many delegates to train in a particular area. Organizations can save valuable training $$$s by holding courses on-site, where costs are significantly less. Other benefits are IDCs ability to focus on particular systems and equipment so that attendees obtain only the greatest benefits from the training. All on-site workshops are tailored to meet with clients training requirements and courses can be presented at beginners, intermediate or advanced levels based on the knowledge and experience of delegates in attendance. Specific areas of interest to the client can also be covered in more detail. Our external workshops are planned well in advance and you should contact us as early as possible if you require on-site/customized training. While we will always endeavor to meet your timetable preferences, two to three months notice is preferable in order to successfully fulfil your requirements. Please dont hesitate to contact us if you would like to discuss your training needs.

IDC Technologies

Technology Training that Works

Customized Training
In addition to standard on-site training, IDC specializes in customized courses to meet client training specifications. IDC has the necessary engineering and training expertise and resources to work closely with clients in preparing and presenting specialized courses. These courses may comprise a combination of all IDC courses along with additional topics and subjects that are required. The benefits to companies in using training is reflected in the increased efficiency of their operations and equipment.

Training Contracts
IDC also specializes in establishing training contracts with companies who require ongoing training for their employees. These contracts can be established over a given period of time and special fees are negotiated with clients based on their requirements. Where possible IDC will also adapt courses to satisfy your training budget.
References from various international companies to whom IDC is contracted to provide on-going technical training are available on request.

Some of the thousands of Companies world-wide that have supported and benefited from IDC workshops are:
Alcoa, Allen-Bradley, Altona Petrochemical, Aluminum Company of America, AMC Mineral Sands, Amgen, Arco Oil and Gas, Argyle Diamond Mine, Associated Pulp and Paper Mill, Bailey Controls, Bechtel, BHP Engineering, Caltex Refining, Canon, Chevron, Coca-Cola, Colgate-Palmolive, Conoco Inc, Dow Chemical, ESKOM, Exxon, Ford, Gillette Company, Honda, Honeywell, Kodak, Lever Brothers, McDonnell Douglas, Mobil, Modicon, Monsanto, Motorola, Nabisco, NASA, National Instruments, National Semi-Conductor, Omron Electric, Pacific Power, Pirelli Cables, Proctor and Gamble, Robert Bosch Corp, Siemens, Smith Kline Beecham, Square D, Texaco, Varian, Warner Lambert, Woodside Offshore Petroleum, Zener Electric

IDC Technologies

Technology Training that Works

IDC Technologies

Technology Training that Works

You might also like