Wet Con Micro Wet Con

U N D E R WAT E R E L E C T R I C A L A N D F I B E R O P T I C C O N N E C T O R S
U N D E RWAT E R E L E C T R I C A L W E T- M AT E C O N N E C TO R S
p b ^ ` l k
tbqJ`lk= SERIES
UNDERWATER ELECTRICAL WET-MATE CONNECTORS
tbqJ`
`lk== SERIES
CONTENTS PAGE
PAGE
SECTION
tbqJ`
`lk== SERIES
Product News - Connector Enhancements ................................................................................................................................................. WC 3
IP68 and IPX8 Awarded to pb^`lk (europe) Ltd ...................................................................................................................................... WC 3
Introduction .................................................................................................................................................................................................. WC 4
Availability .................................................................................................................................................................................................... WC 4
Applications .................................................................................................................................................................................................. WC 4
Special Assemblies ...................................................................................................................................................................................... WC 4
Part Number System ................................................................................................................................................................................... WC 4
General Information ..................................................................................................................................................................................... WC 5
Ampacity Chart for Standard Parts .............................................................................................................................................................. WC 5
Standard Wiring Color Code ........................................................................................................................................................................ WC 5
Dimension Details:
BH-MP (2 - 10 Contacts) ......................................................................................................................................................................... WC 6
BH-FS (2 - 10 Contacts) ......................................................................................................................................................................... WC 6
IL-MP (2 - 10 Contacts) ........................................................................................................................................................................... WC 7
IL-FS (2 - 10 Contacts) ............................................................................................................................................................................ WC 7
BH-MP (12 - 16 Contacts) ....................................................................................................................................................................... WC 8
BH-FS (12 - 16 Contacts) ........................................................................................................................................................................ WC 8
IL-MP (12 - 16 Contacts) ....................................................................................................................................................................... WC 9
IL-FS (12 - 16 Contacts) ........................................................................................................................................................................ WC 9
DLS-F ..................................................................................................................................................................................................... WC 10
DLS-M .................................................................................................................................................................................................... WC 10
LPBH-MP ............................................................................................................................................................................................... WC 11
LPBH-FS ................................................................................................................................................................................................ WC 11
LPIL-MP ................................................................................................................................................................................................. WC 12
LPIL-FS .................................................................................................................................................................................................. WC 12
Interface Details ......................................................................................................................................................................................... WC 13
Contact Configurations ............................................................................................................................................................................... WC 14
j tbqJ`
`lk SERIES SECTION .......................................................................................................................................... MWC 1-16
j tbqJ`
`lk==pmifq SERIES SECTION ........................................................................................................................... MWC 17-23
www.seaconworldwide.com
- WC 2 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
PRODUCT NEWS
tbqJ`
` lk SERIES CONNECTOR ENHANCEM E N T S
INTRODUCTION
As part of our continuous improvement process the pb^=`lk Group consistently reviews it's product ranges through both customer feedback and internal improvements. It is via these processes that pb^=`lk identified a design enhancement to the tbqJ`lk connector ranges.
DESIGN FEATURES
The design change is associated with the Male Pin connectors only and has been introduced to improve and extend the life of the connectors by decreasing the stresses that are applied to the sealing interface between the male contact pin and the sealing rubber around the pin
during the connectors mate and de-mate cycles.
The newly designed male contact has a "Lead in" as part of the contact pin itself which replaces the current rubber lead in. The introduction
of the new pin removes any potential wear to the sealing interface between the male contact pin and the sealing rubber around the pin which
may occur with many repeated make and breaks of the connector pairs. The new pin will maintain the full connector sealing properties and
will provide a greater life expectancy of the connectors.
The incorporation of this design change to the Male Pin connectors will not affect the existing Female Socket connectors currently being used
by pb^=`lk's customers and therefore full intermateability will be maintained. In addition, pb^=`lk would also like to confirm that pricing
will also not be affected.
TESTING
This new pin design concept has been fully tested and has been utilized in both the rJj^qb and SEA-MATE connector ranges for a number of years.
I P 6 8 A N D I P X 8 C E R T I F I C AT I O N
AWA R D E D T O p b ^ ` l k ( e u r o p e ) LT D
pb^`lk (europe) Ltd is pleased to advise that it's tbqJ`lk connector series is now approved to IP Codes (Ingress Protection) 68 and X8.
These two international standards classify the level of protection provided against the intrusion of dust and water in electrical enclosures.
In order to meet the requirements of the IP68 and IPX8 standards, sample connectors were sent to an independent testing house and subjected to various tests as per the agreed program including pressure testing to 101 bar for a 24 hour period. All test samples successfully
passed and therefore conform to the following conditions:
Dust tight - No ingress of dust, complete protection against contact with dust.
Immersion beyond 1 meter - Suitable for continuous immersion in water, under conditions specified by pb^`lk (europe) Ltd.
- WC 3 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
INTRODUCTION
pb^= `lk's tbqJ`lk connector series was developed to provide
inexpensive yet reliable rubber molded connectors that allow the
user to make and break connections both on the surface and underwater.
APPLICATIONS
The tbqJ`lk series is suitable for a variety of applications including
underwater television and lights, diver communications, ROV systems, recreational submersibles, towed-array cable systems, current
meters, animal migration and research and food processing equipment.
Manufactured using only high quality materials, the tbqJ`lk bulkhead connector's metal shell is produced using DGS 1043 (UK spec)
or CA630 per QQ-C-465 as standard, although other materials are
available upon request including PEEK (Polyetheretherketone)
which offers superior chemical resistance, excellent electrical properties, wear and abrasion resistance and is light weight. Contacts are
gold plated to ASTM B488 providing superior corrosion resistance
and stainless steel guide pins ensure "no miss" mating.
AVAILABILITY
This connector range is available in a number of configurations ranging from 1 to 16 contacts rated upto 19 amps maximum current
(dependent on cable) and a mated pressure rating of upto 20,000
psi.
The tbqJ`lk series is also available with a metal shell body, individual single tail, extended metal shoulder and a water-blocked version which is suitable where there will be reverse pressure applied to
the connector i.e. subsea electronics pods or ROV systems. For further information please contact pb^=`lk.
SPECIAL ASSEMBLIES
pb^= `lk maintains all facilities necessary to furnish complete
underwater and environmental electrical connector/cable systems,
including Research and Development, Engineering, Manufacturing,
Quality Control and Pressure Testing.
As well as supplying our standard off-the-shelf items, we have the
capability to design and manufacture SPECIAL CUSTOMIZED
CONNECTORS AND CABLE ASSEMBLIES to suit your individual
needs.
pb^=`lk also prides itself with the ability to perform stringent quality conformance testing procedures which are in accordance with the
MIL-SPEC programs.
NOTES:
tbqJ`lk connectors are intended to mate with tbqJ`lk connectors only.
Although the tbqJ`lk and îiJtbq connectors look similar, the numbering
pattern and color codes are not the same.
We recommend, as general practice, to verify color code and pin location
before installation.
PART NUMBER SYSTEM - EXAMPLE

tbqJ`
`lk== BULKHEAD CONNECTORS
tbqJ`
`lk IN-LINE CONNECTORS
IL - 4 - FS
BH - 4 - MP
MP - Male Plug
FS - Female Socket
FS - Female Socket
MP - Male Plug
Number of Contacts
Number of Contacts
tbqJ`lk Bulkhead Connector
tbqJ`lk In-Line Connector
tbqJ`
`lk LOCKING SLEEVES
tbqJ`
`lk DUMMY CONNECTORS
Locking Sleeves are available for tbqJ`lk connectors as an option.
Dummy connectors are available parts in the tbqJ`lk Series.
DLSA - M
DC - 4 - FS
M - Male
F - Female
FS - Female Socket
MP - Male Plug
Size (A, B, C)
Number of Contacts
tbqJ`lk Delrin (DuPont trademark for

Acetal Resin) Locking Sleeve
tbqJ`lk Dummy Connector
NOTES:
Size A fits 2, 3, 4 and 5 contact patterns.
Size B fits 6, 8 and 10 contact patterns.
Size C fits 12 and 16 contact patterns.
- WC 4 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
GENERAL INFORMATION
COMPONENT
MATERIAL
CATEGORY
BULKHEAD BODY:
STANDARD: DGS 1043 or CA630 per QQ-C-465
OPTIONAL: 316 Stainless Steel (no cost option), 6061-T6 Aluminum,
Hard Anodized
VALUE
OPEN FACE PRESSURE BULKHEAD Up to 1,000 psi (2,300 ft)
CONNECTOR BODY:
STANDARD: Neoprene per B/A X5727
OPTIONAL: Hypalon per B/A X6830 or PEEK (Polyetheretherketone)
MATED PRESSURE BULKHEAD
Up to 10,000 psi (23,000 ft)
MATED PRESSURE IN-LINES
Up to 20,000 psi (46,000 ft)
VOLTAGE
600 VDC (with standard cable)
CURRENT
Up to 19 amps per contact
CONTACTS
Copper Alloy Gold Plated per ASTM B488
CONTACT RESISTANCE
<0.01 ohms
GUIDE PINS
304 Stainless Steel
INSULATION RESISTANCE
>500 megohms after wet mating
O-RINGS
Nitrile (formerly known as Buna N)
MATING CYCLES
>500 wet matings
IN-LINE CABLE
#18 AWG SO Cable as standard

#14 or #16 AWG SO Cable available dependent on
connector size
OPERATING TEMPERATURE
25 to 140F (-4 to 60C)
BULKHEAD PIGTAILS
Teflon (Registered trademark for DuPont) type E hook-up

wire, 18 inches
NOTES:
Locking sleeves are not standard and must be ordered separately. Available in Delrin (DuPont trademark for Acetal Resin).
Bulkhead nut/washer is not standard and must be ordered separately. Available in Brass or 316 Stainless Steel.
In-line cable and hook up wire is 18 inch standard length. Longer length to be specified when ordering.
In-line cable is available in #14 or #16 AWG SO. Cable other than SO will be terminated and over-molded to a bulkhead connector.
AMPACITY CHART FOR STANDARD PARTS (18 AWG SO CABLE)

PART DESCRIPTION
NUMBER OF CONTACTS
AMPACITY
7 amps
IL-BH-8
4.9 amps
7 amps
IL-BH-10
3.5 amps
IL-BH-4
5.6 amps
IL-BH-12
3.5 amps
IL-BH-5
5.6 amps
IL-BH-16
3.5 amps
IL-BH-6
5.6 amps
CONTACT #
COLOR
PART DESCRIPTION
NUMBER OF CONTACTS
AMPACITY
IL-BH-2
IL-BH-3
NOTE:
Higher ampacities are available.
STANDARD IN-LINE WIRING COLOR CODE (SO CABLE)

CONTACT #
COLOR
BLACK
GREEN/BLACK
WHITE
10
ORANGE/BLACK
RED *
11
BLUE/BLACK
GREEN
12
BLACK/WHITE
ORANGE
13
RED/WHITE
BLUE
14
GREEN/WHITE
WHITE/BLACK
15
BLUE/WHITE
RED/BLACK
16
BLACK/RED
NOTE:
* For 3 contact configurations wiring color code is GREEN.
CAUTION:
tbqJ`lk connectors are intended to mate with tbqJ`lk connectors only. Although the tbqJ`lk and îiJtbq connectors look similar, the numbering pattern
and color codes are not the same. We recommend, as general practice, to verify color code and pin location before installation.
- WC 5 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
BH-MP
(2 - 10 contacts)
tbqJ`lk Bulkhead Connector Male Plug
Mates with IL-FS
Dummy Connector: DC-FS
CONNECTOR
A - THREAD
1 - O-RING
B - (INCHES)
C - HEX FLATS (INCHES)
2 - HOOK-UP WIRE
BH-2-MP
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-3-MP
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-4-MP
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-5-MP
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-6-MP
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
BH-8-MP/MPX*
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
BH-10-MP
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
tbqJ`
`lk SERIES
BH-FS
(2 - 10 contacts)
tbqJ`lk=Bulkhead Connector Female Socket
Mates with IL-MP
Dummy Connector: DC-MP
CONNECTOR
D - THREAD
3 - O-RING
E - (INCHES)
F - HEX FLATS (INCHES)
4 - HOOK-UP WIRE
BH-2-FS
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-3-FS
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-4-FS
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-5-FS
7/16-20 UNF-2A
2-014
1.00
0.75
18 AWG
BH-6-FS
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
BH-8-FS/FSX*
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
BH-10-FS
5/8-18 UNF-2A
2-017
1.25
1.00
18 AWG
NOTES:
Bulkhead mounting torque: 7/16 thread = 50 inch pounds. 5/8 thread = 85 inch pounds.
Nut and washer: Optional.
Dummy Connector: Optional.
Dummy Shorting Plug: Optional.
O-Ring: Nitrile (formerly known as Buna N).
Bulkhead leads are tagged with pin number.
Connectors must be lubricated prior to mating.
Torque values referenced in this literature assume installation into dry metal threads. For other applications, please contact pb^=`lk for recommendations.
Connectors are designed for installation on one atmosphere vessels. Contact pb^=`lk for recommendations if using compensated vessels.
For contact configurations please refer to page 14.
* No guide pin. MPX/FSX connectors are recommended for new applications.
- WC 6 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
IL-MP
(2 - 10 contacts)
tbqJ`lk In-Line Connector Male Plug
Mates with BH-FS and IL-FS
CONNECTOR
A - (INCHES)
1 - CABLE
IL-2-MP
1.00
18/2 SO
IL-3-MP
1.00
18/3 SO
IL-4-MP
1.00
18/4 SO
IL-5-MP
1.00
18/5 SO
IL-6-MP
1.25
18/6 SO
IL-8-MP/MPX*
1.25
18/8 SO
IL-10-MP
1.25
18/10 SO
tbqJ`
`lk SERIES
IL-FS
(2 - 10 contacts)
tbqJ`lk In-Line Connector Female Socket
Mates with BH-MP and IL-MP
CONNECTOR
B - (INCHES)
2 - CABLE
IL-2-FS
1.00
18/2 SO
IL-3-FS
1.00
18/3 SO
IL-4-FS
1.00
18/4 SO
IL-5-FS
1.00
18/5 SO
IL-6-FS
1.25
18/6 SO
IL-8-FS/FSX*
1.25
18/8 SO
IL-10-FS
1.25
18/10 SO
NOTES:
Locking Sleeve: Optional (see page 10).
* No guide pin. MPX/FSX connectors are recommended for new applications.
- WC 7 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
BH-MP
(12 - 16 contacts)
tbqJ`lk Bulkhead Connector Male Plug
Mates with IL-FS
CONNECTOR
A - THREAD
B - O-RING
C - HEX FLATS (INCHES)
D - HOOK-UP WIRE
BH-12-MP
5/8-18 UNF-2A
2-017
1.00
18 AWG
BH-16-MP
3/4-16 UNF-2A
2-118
1.25
18 AWG
tbqJ`
`lk SERIES
BH-FS
(12 - 16 contacts)
tbqJ`lk Bulkhead Connector Female Socket
Mates with IL-MP
CONNECTOR
E - THREAD
F - O-RING
G - HEX FLATS
(INCHES)
H - HOOK-UP WIRE
BH-12-FS
5/8-18 UNF-2A
2-017
1.00
18 AWG
BH-16-FS
3/4-16 UNF-2A
2-118
1.25
18 AWG
NOTES:
Bulkhead Mounting Torque: 5/8 Thread = 85 inch pounds. 3/4 Thread = 85 inch pounds.
Nut and washer: Optional.
O-Ring: Nitrile (formerly known as Buna N).
Bulkhead leads are tagged with pin number.
Connectors must be lubricated before mating.
For contact configurations please refer to page 14.
- WC 8 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
IL-MP
(12 - 16 contacts)
tbqJ`lk In-Line Connector Male Plug
Mates with BH-FS and IL-FS
CONNECTOR
A - (INCHES)
B - CABLE
IL-12-MP
1.60
18/12 SO
IL-16-MP
1.60
18/16 SO
tbqJ`
`lk SERIES
IL-FS
(12 - 16 contacts)
tbqJ`lk In-Line Connector Female Socket
Mates with BH-MP and IL-MP
CONNECTOR
C - (INCHES)
D - CABLE
IL-12-FS
1.60
18/12 SO
IL-16-FS
1.60
18/16 SO
NOTES:
IL-16-MP WOC is not available, substitute with BH-16-MP.
Shorting plugs are available should you require the ability of looping together 'like' circuits for testing purposes within the dummy. Pin to pin shorting details
need to be supplied at time of order placement.
- WC 9 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
DLS-F
tbqJ`
`lk SERIES
DLS-M
tbqJ`lk Locking Sleeve Female
tbqJ`lk Locking Sleeve Male
C - (INCHES)
D - MATED LENGTH
(INCHES)
E - SPIROLOX*
0.90
2.19
RR 103
1.29
2.19
RR 103
0.94
2.26
RR 125
LOCKING SLEEVE
A - (INCHES)
B - (INCHES)
DLSA-M
1.40
DLSA-F
1.40
DLSB-M
1.62
DLSB-F
1.62
1.32
2.26
RR 125
DLSC-M
2.37
0.78
1.95
RR 187
DLSC-F
2.38
1.17
1.95
RR 187
NOTES:
* SPIROLOX RINGS: Stainless Steel.
- WC 10 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
LPBH-MP
tbqJ`lk Low Profile Bulkhead Connector Male Plug
Mates with LPBH-FS & LPIL-FS
NOTES:
1 - LPBH-BC SHELL: CA 630 and Copper Contacts, Gold Plated.
2 - O-RING: 2-014 Nitrile (formerly known as Buna N).
3 - LPBH-3/4-MP: Neoprene Molding per B/A X-5727.
4 - PIN: Copper Alloy and Gold Plated per MIL-G-45204.
5 - #18 AWG TEFLON (Registered trademark for DuPont) WIRE: 12 inches long.
6 - WASHER (OPTIONAL): Brass.
7 - HEX NUT (OPTIONAL): Brass.
MOUNTING TORQUE: 40 inch lbs.
PRESSURE RATING: 20,000 psi mated.
tbqJ`
`lk SERIES
LPBH-FS
tbqJ`lk Low Profile Bulkhead Connector Female Socket
Mates with LPBH-MP & LPIL-MP
NOTES:
8 - LPBH-BC SHELL: CA 630 and Copper Sockets, Gold Plated.
9 - POTTING: White Epoxy per B/A 6373.
10 - O-RING: 2-014 Nitrile (formerly known as Buna N).
11 - MOLDED BODY: Neoprene Molding per B/A X-5727.
12 - SOCKET: Copper Alloy 360 per QQ-B-626 or 61A;
Gold Plated per MIL-G-45204, Type II,
Grade C, Class I, with Flash Nickel Undercoat.
13 - #18 AWG TEFLON (Registered trademark for DuPont) WIRE: 12 inches long.
MOUNTING TORQUE: 40 inch lbs.
- WC 11 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
DIMENSION DETAILS
tbqJ`
`lk SERIES
LPIL-MP
tbqJ`lk=Low Profile In-Line Connector Male Plug
Mates with LPBH-FS & LPIL-FS
NOTES:
1 - PIN: CA 630 & Gold Plated per ASTM-B488-95.
2 - RUBBER MOLD: Neoprene Mold per B/A X-5727.
3 - CABLE: 16/3 SOW or 16/4 SOW.
tfob==`lilo==`lab
CONTACT NUMBER
COLOR
BLACK
WHITE
RED
GREEN
tbqJ`
`lk SERIES
LPIL-FS
tbqJ`lk Low Profile In-Line Connector Female Socket
Mates with LPBH-MP & LPIL-MP
NOTES:
1 - SOCKET: CA 630 per MSBA-019.
2 - RUBBER MOLD: Neoprene per MSNBA-027.
3 - CABLE: 16/3 SOW or 16/4 SOW.
- WC 12 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
INTERFACE DETAILS
tbqJ`
`lk SERIES
BH-MP/FS
THROUGH BORE OPTION
tbqJ`lk Bulkhead Connector Male Plug/Female Socket
tbqJ`
`lk SERIES
BH-MP/FS
THREADED MOUNTING OPTION
tbqJ`lk Bulkhead Connector Male Plug/Female Socket
CONNECTOR
THREAD
BH-MP/FS (2/3/4/5)
7/16-20 UNF-2B
BH-MP/FS (6/8/10/12)
5/8-18 UNF-2B
BH-MP/FS (16)
3/4-16 UNF-2B
BORE (INCHES)
MOUNTING TORQUE (INCH POUNDS)
SPOT FACE (INCHES)
A - MAX (INCHES)
50
1.00
0.44
85
1.25
0.44
85
1.50
0.44
+0.015
- 0.000
+0.015
0.625
- 0.000
+0.015
0.750
- 0.000
0.437
- WC 13 -
REV VIII
pb ^`lk
tbqJ`
`lk== SERIES
SIZE
CONTACT CONFIGURATIONS
tbqJ`
`lk SERIES BULKHEAD/IN-LINE CONTACT CONFIGURATIONS (FEMALE FACE VIEW ONLY - NOT TO SCALE)*
FS
FS
FS
FS
FS
FS (A)
FS
FS
10
FS
12
16
FS
FS
FS (A)
KEY
NOTES:
* For male face view contact configurations please contact pb^=`lk.
GUIDE PIN
- WC 14 -
REV VIII
pb ^`lk
p b ^ ` l k
j=tbqJ`lk=SERIES
j==tbqJ`
`lk== SERIES
CONTENTS PAGE
PAGE
SECTION
j==tbqJ`
`lk
Product News - Connector Enhancements............................................................................................................................................... MWC 3
Introduction ............................................................................................................................................................................................... MWC 4

Availability ................................................................................................................................................................................................. MWC 4
Applications ............................................................................................................................................................................................... MWC 4
Special Assemblies ................................................................................................................................................................................... MWC 4
Part Number System ................................................................................................................................................................................ MWC 4
General Information .................................................................................................................................................................................. MWC 5

Ampacity Chart for Standard Parts ........................................................................................................................................................... MWC 5
Standard Wiring Color Code ..................................................................................................................................................................... MWC 5
Dimension Details:
MC-BH-M (2 to 8 Contacts) .................................................................................................................................................................. MWC 6
MC-BH-F (2 to 8 Contacts) ................................................................................................................................................................... MWC 6
MC-BH-M (10 to 16 Contacts) .............................................................................................................................................................. MWC 7
MC-BH-F (10 to 16 Contacts) ............................................................................................................................................................... MWC 7
MC-BH-M-DO (2 to 8 Contacts) ........................................................................................................................................................... MWC 8

MC-BH-F-DO (2 to 8 Contacts) ............................................................................................................................................................ MWC 8
MC-BH-M-DO (10 to 16 Contacts) ....................................................................................................................................................... MWC 9
MC-BH-F-DO (10 to 16 Contacts) ........................................................................................................................................................ MWC 9
MC-IL-M (2 to 8 Contacts) .................................................................................................................................................................. MWC 10

MC-IL-F (2 to 8 Contacts) ................................................................................................................................................................... MWC 10
MC-IL-M (10 to 16 Contacts) .............................................................................................................................................................. MWC 11
MC-IL-F (10 to 16 Contacts) ............................................................................................................................................................... MWC 11
MC-DC-M (2 to 8 Contacts) ................................................................................................................................................................ MWC 12

MC-DC-F (2 to 8 Contacts) ................................................................................................................................................................. MWC 12
MC-DC-M (10 to 16 Contacts) ............................................................................................................................................................ MWC 13
MC-DC-F (10 to 16 Contacts) ............................................................................................................................................................. MWC 13
MC-DLS-M (2 to 8 Contacts) .............................................................................................................................................................. MWC 14

MC-DLS-F (2 to 8 Contacts) ............................................................................................................................................................... MWC 14
MC-DLS-M (10 to 16 Contacts) .......................................................................................................................................................... MWC 14
MC-DLS-F (10 to 16 Contacts) ........................................................................................................................................................... MWC 14
Interface Details ...................................................................................................................................................................................... MWC 15
Contact Configurations ........................................................................................................................................................................... MWC 16
j tbqJ`
`lk==pmifq SERIES SECTION .......................................................................................................................... MWC 17-23
- MWC 2 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
PRODUCT NEWS
j== tbqJ`
` lk and j== tbqJ`
` lk pmifq SERIES
CONNECTOR ENHANCEM E N T S
INTRODUCTION
As part of our continuous improvement process the pb^=`lk Group consistently reviews it's product ranges through both customer feedback and internal improvements. It is via these processes that pb^=`lk identified a design enhancement to the j=tbqJ`lk connector
ranges. This new design improvement has now been implemented not only across this connector range, but also the new j=tbqJ`lk
p=Series.
DESIGN FEATURES
The design change is associated with the Male Pin connectors only and has been introduced to improve and extend the life of the connectors by decreasing the stresses that are applied to the sealing interface between the male contact pin and the sealing rubber around the pin
during the connectors mate and de-mate cycles.
The newly designed male contact has a "Lead in" as part of the contact pin itself which replaces the current rubber lead in. The introduction
of the new pin removes any potential wear to the sealing interface between the male contact pin and the sealing rubber around the pin which
may occur with many repeated make and breaks of the connector pairs. The new pin will maintain the full connector sealing properties and
will provide a greater life expectancy of the connectors.
The incorporation of this design change to the Male Pin connectors will not affect the existing Female Socket connectors currently being used
by pb^=`lk's customers and therefore full intermateability will be maintained. In addition, pb^=`lk would also like to confirm that pricing
will also not be affected.
TESTING
This new pin design concept has been fully tested and has been utilized in both the rJj^qb and SEA-MATE connector ranges for a number of years.
MCAT ATTACHABLE j tbq`lk

Due to global demand to terminate standard rubber molded connectors onto specialized or customer furnished cable, pb^= `lk Global
Production has introduced an MCAT version of the successful j=tbqJ`lk connector series.
This new connector can be terminated virtually anywhere eliminating the need for shipping bulky long lengths of cable. In addition the end
user is able to produce a reduced length termination without the need for additional cable splices and have one continuous cable diameter for
the total length of the cable.
The MCAT connector is fully inter-mateable with like configured j=tbqJ`lk inline and bulkhead connectors. For further information and
for cable jacket materials that can be accommodated please contact pb^=`lk.
- MWC 3 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
INTRODUCTION
The j tbqJ`lk connector series was developed to provide all
the features of pb^= `lks îiJtbq connector series, but in a
miniature, industry standard configuration. The small size offers the
same flexibility and reliability as our rubber molded connectors, in a
light-weight and user friendly model.
APPLICATIONS
Possible applications include: underwater television and lights, diver
communications, ROV systems, submersibles, towed-array cable
systems, current meters, animal migration research and food processing equipment.
The j=tbqJ`lk series allows for smaller through ports in a pressure vessel and a greater density of conductors in a compact area.
The smaller cables decrease the overall weight and drag of an ROV
or other vessel. This connector range is wet-mateable and therefore
enables connections to be made underwater, on-deck or in any
weather condition.
AVAILABILITY
The j= tbqJ`lk series is a stocked item, which ensures quick
delivery (in reasonable quantities) of standard configurations.
Custom cable lengths are available upon request. Shorting plugs are
available should you require the ability of looping together 'like' circuits for testing purposes within the dummy. Pin to pin shorting
details need to be supplied at time of order placement.
MATERIALS
The j= tbqJ`lk is made from a proprietary grade Neoprene.
The standard locking sleeves are Delrin (DuPont trademark for
Acetal Resin), which is lightweight, durable and user-friendly in the
working environment (Brass and Stainless Steel are also available
upon request).
TESTING
The j tbqJ`lk range has undergone complete Qualification
testing including low pressure soak tests, full mate/de-mate and high
pressure cycling to 10,000 psi.
SPECIAL ASSEMBLIES
needs.
MIL-SPEC programs.

MC - IL - 4 - M - S/S
Stainless Steel - Bulkheads Only (Standard is Brass)
M - Male Plug
F - Female Socket
Number of Contacts
IL - In-Line
BH - Bulkhead
DC - Dummy Connector
j tbqJ`lk Series
NOTES:
For Locking Sleeves see page MWC 14.
- MWC 4 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
GENERAL INFORMATION
COMPONENT
MATERIAL
CATEGORY
VALUE
OPEN FACE PRESSURE
10,000 psi (700 bar) optional and needs to be specified

Dummy cap recommended above 100 psi
MATED PRESSURE
10,000 psi (700 bar)
VOLTAGE RATING
2, 3 & 4 pin 600 VDC

5, 6, 8, 10, 12 & 16 pin 300 VDC
Brass (CA #360)
CURRENT RATING
Up to 19 amps per contact
O-RING
>200 megohms @ 300 VDC
LOCKING SLEEVE
Delrin (DuPont trademark for Acetal Resin)
CONTACT RESISTANCE
<0.01 ohms
AIR MATE
>1,000 cycles
UNDERWATER MATE
>500
25 to 140F (-4 to 60C)
MOUNTING TORQUE
85 in-lb*
In dry stainless 1/2 long Female threads
MOLDED BODY
Neoprene
BULKHEAD BODY
Brass (CA #360)
CONTACTS
Brass-gold plated (CA #360)
GUIDE PINS
Stainless Steel (303 SS or 304 SS)
BULKHEAD N & W
IN-LINE CABLE
(2, 3 & 4 PIN):
(5, 6, 8, 10, 12 & 16 PIN):
STANDARD LENGTH:
HOOK-UP WIRE (BC)
Neoprene, #18 AWG (SO Cable)

Neoprene, #20 AWG
24 inches (60cm)
Teflon (Registered trademark for DuPont), #20 AWG
Standard length 13 inches (33cm)
NOTES:
Contact pb^=`lk for special order materials.
Incorporation of special order cables will be determined on a case by case basis.
* For metal shells only, for other materials contact pb^=`lk for recommendations.
AMPACITY CHART FOR STANDARD PARTS (18 & 20 AWG SO CABLE)

PART DESCRIPTION
NUMBER OF CONTACTS
PART DESCRIPTION
NUMBER OF CONTACTS
AMPACITY
MCBH/IL-2
10 amps
MCBH/IL-8
3 amps
MCBH/IL-3
6 amps
MCBH/IL-10
2.5 amps
MCBH/IL-4
6 amps
MCBH/IL-12
2.5 amps
MCBH/IL-5
3 amps
MCBH/IL-16
2 amps
MCBH/IL-6
3 amps
CONTACT #
COLOR
AMPACITY
STANDARD IN-LINE WIRING COLOR CODE (SO CABLE)

CONTACT #
COLOR
BLACK
GREEN/BLACK
WHITE
10
ORANGE/BLACK
RED **
11
BLUE/BLACK
GREEN
12
BLACK/WHITE
ORANGE
13
RED/WHITE
BLUE
14
GREEN/WHITE
WHITE/BLACK
15
BLUE/WHITE
RED/BLACK
16
BLACK/RED
NOTE:
** For 3 contact configurations wiring color code is GREEN.
- MWC 5 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-BH-M
(2 - 8 contacts)
j=tbqJ`lk Bulkhead Connector Male Plug
Mates with MC-IL-F
Dummy Connector: MC-DC-F
j==tbqJ`
`lk SERIES
MC-BH-F
(2 - 8 contacts)
j=tbqJ`lk Bulkhead Connector Female Socket
Mates with MC-IL-M
Dummy Connector: MC-DC-M
j==tbqJ`
`lk SERIES
HEX NUT AND WASHER
(2 - 8 contacts)
j=tbqJ`lk Bulkhead Connector
STD - BRASS
NOTES:
(Stainless Steel and others upon request)
Hex Nut and Washer: Optional.
O-Ring: 2-014.
Dummy Shorting Plug Connector: Optional.
- MWC 6 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-BH-M
(10 - 16 contacts)
j=tbqJ`lk Bulkhead Connector Male Plug
Mates with MC-IL-F
j==tbqJ`
`lk SERIES
MC-BH-F
(10 - 16 contacts)
j=tbqJ`lk Bulkhead Connector Female Socket
Mates with MC-IL-M
j==tbqJ`
`lk SERIES
HEX NUT AND WASHER
(10 - 16 contacts)
STD - BRASS
(Stainless Steel and others upon request)
NOTES:
O-Ring: 2-015.
Dummy Shorting Plug Connector: Optional.
- MWC 7 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-BH-M-DO (DOUBLE O-RING)
(2 - 8 contacts)
j=tbqJ`lk Bulkhead Connector Male Plug with Double O-Ring
Mates with MC-IL-F
j==tbqJ`
`lk SERIES
MC-BH-F-DO (DOUBLE O-RING)
(2 - 8 contacts)
j=tbqJ`lk Bulkhead Connector Female Socket with Double O-Ring
Mates with MC-IL-M
PART NUMBER
PART DESCRIPTION
MC-BH DOUBLE O-RING SHELL
NEOPRENE MOLDING
O-RING 2-012
O-RING 06-10525-1
WASHER
BULKHEAD LEADS
HEX NUT 7/16 - 20
NOTES:
Dummy Shorting Plug Connector: Optional. (Shorting plugs are available should you require the ability of looping together 'like' circuits for testing purposes
within the dummy. Pin to pin shorting details need to be supplied at time of order placement).
- MWC 8 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-BH-M-DO (DOUBLE O-RING)
(10 - 16 contacts)
j=tbqJ`lk Bulkhead Connector Male Plug with Double O-Ring
Mates with MC-IL-F
j==tbqJ`
`lk SERIES
MC-BH-F-DO (DOUBLE O-RING)
(10 - 16 contacts)
j=tbqJ`lk Bulkhead Connector Female Socket with Double O-Ring
Mates with MC-IL-M
PART NUMBER
PART DESCRIPTION
MC-BH DOUBLE O-RING SHELL
NEOPRENE MOLDING
O-RING 06-10583-1
O-RING 06-10437-1
WASHER
HEX NUT 1/2-20
BULKHEAD LEADS
NOTES:
Bulkhead Locking Sleeve: Optional.
Torque values referenced in this literature assume installation into dry metal threads. For other applications, please contact pb^=`lN for recommendations.
- MWC 9 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-IL-M
(2 - 8 contacts)
j=tbqJ`lk In-Line Connector Male Plug
Mates with MC-IL-F & MC-BH-F
j==tbqJ`
`lk SERIES
MC-IL-F
(2 - 8 contacts)
j=tbqJ`lk In-Line Connector Female Socket
Mates with MC-IL-M & MC-BH-M
NOTES:
Locking Sleeve: Optional (see page MWC 14).
* Incorporation of special order cables will be determined on a case-by-case basis.
- MWC 10 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-IL-M
(10 - 16 contacts)
j=tbqJ`lk In-Line Connector Male Plug
j==tbqJ`
`lk SERIES
MC-IL-F
(10 - 16 contacts)
j=tbqJ`lk In-Line Connector Female Socket
NOTES:
* Incorporation of special order cables will be determined on a case-by-case basis.
- MWC 11 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-DC-M
(2 - 8 contacts)
j=tbqJ`lk Dummy Connector Male Plug
j==tbqJ`
`lk SERIES
MC-DC-F
(2 - 8 contacts)
j=tbqJ`lk Dummy Connector Female Socket
NOTES:
- MWC 12 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-DC-M
(10 - 16 contacts)
j=tbqJ`lk Dummy Connector Male Plug
j==tbqJ`
`lk SERIES
MC-DC-F
(10 - 16 contacts)
j=tbqJ`lk Dummy Connector Female Socket
NOTES:
- MWC 13 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk SERIES
MC-DLS-F
(2 - 8 contacts)
j==tbqJ`
`lk SERIES
MC-DLS-M
(2 - 8 contacts)
j=tbqJ`lk Dummy Locking Sleeve Female Socket
j=tbqJ`lk Dummy Locking Sleeve Male Plug
j==tbqJ`
`lk SERIES
MC-DLS-F
(10 - 16 contacts)
j==tbqJ`
`lk SERIES
MC-DLS-M
(10 - 16 contacts)
j=tbqJ`lk Dummy Locking Sleeve Female Socket
j=tbqJ`lk Dummy Locking Sleeve Male Plug
NOTES:
* Not required for 2 to 8 way Bulkhead connectors. For In-Lines only.
Locking Sleeves: Delrin (DuPont trademark for Acetal Resin).
- MWC 14 -
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
INTERFACE DETAILS
j==tbqJ`
`lk SERIES
MC-BH-M/F
THROUGH BORE OPTION
j==tbqJ`
`lk SERIES
MC-BH-M/F
j=tbqJ`lk Bulkhead Connector Male/Female
j=tbqJ`lk Bulkhead Connector Male/Female
CONNECTOR
BORE (INCHES)
+0.015
- 0.000
+0.015
0.500
- 0.000
MC-BH (2-8)
0.437
MC-BH (10-16 )
THREAD
SPOT FACE (INCHES)
7/16-20 UNF-2B
0.88
1/2-20 UNF-2B
0.94
j==tbqJ`
`lk SERIES
MC-BH-M/F-DO (DOUBLE O-RING)
THROUGH BORE OPTION
j==tbqJ`
`lk SERIES
MC-BH-M/F-DO (DOUBLE O-RING)
j=tbqJ`lk Bulkhead Connector Male/Female with

Double O-Ring
j=tbqJ`lk Bulkhead Connector Male/Female with

Double O-Ring
CONNECTOR
A - LENGTH (INCHES)
MC-BH-DO (2-8)
0.425
MC-BH-DO (10-16)
0.500
B - (INCHES)
0.475
0.473
0.553
0.552
- MWC 15 -
C - (INCHES)
D - THREAD
E - (INCHES)
0.88
7/16-20 UNF-2B
0.750 MIN
0.94
1/2-20 UNF-2B
1.000 MIN
REV VIII
pb ^`lk
j==tbqJ`
`lk== SERIES
SIZE
j==tbqJ`
`lk SERIES BULKHEAD/IN-LINE CONTACT CONFIGURATIONS (MALE FACE VIEW ONLY - NOT TO SCALE)*
2-8
MC-BH / MC-IL-2
MC-BH / MC-IL-3
MC-BH / MC-IL-4
MC-BH / MC-IL-5
MC-BH / MC-IL-6
MC-BH / MC-IL-8 **
10-16
MC-BH / MC-IL-10
MC-BH / MC-IL-12
MC-BH / MC-IL-16
KEY
GUIDE PIN
NOTES:
* For female face view contact configurations available please contact pb^=`lk.
** Ethernet version available.
- MWC 16 -
REV VIII
pb ^`lk
p b ^ ` l k
j=tbqJ`lk=pmifq=SERIES
j==tbqJ`
`lk==pmifq== SERIES
CONTENTS PAGE
PAGE
SECTION
tbqJ`
`lk==pmifq=== SERIES
Introduction .............................................................................................................................................................................................. MWC 19
Availability ................................................................................................................................................................................................ MWC 19
Applications ............................................................................................................................................................................................. MWC 19
Testing ..................................................................................................................................................................................................... MWC 19
Special Assemblies .................................................................................................................................................................................. MWC 19
Part Number System ............................................................................................................................................................................... MWC 19

General Information ................................................................................................................................................................................. MWC 19
In-Line Cable ........................................................................................................................................................................................... MWC 19
Dimension Details:
MC-BH-F (6 Contacts) ........................................................................................................................................................................ MWC 20
MC-IL-M (6 Contacts) ......................................................................................................................................................................... MWC 20
MC-DLS-F (6 Contacts) ...................................................................................................................................................................... MWC 20
MC-BH-F (12 to 16 Contacts) ............................................................................................................................................................. MWC 21

MC-IL-M (12 to 16 Contacts) .............................................................................................................................................................. MWC 21
MC-DLS-F/M (12 to 16 Contacts) ....................................................................................................................................................... MWC 21
Interface Details ...................................................................................................................................................................................... MWC 22
Contact Configurations ........................................................................................................................................................................... MWC 23
- MWC 18 -
REV VIII
pb ^`lk
j==tbqJ`
`lk==pmifq== SERIES
INTRODUCTION
pb^=`lk has added a range of split connectors to it's popular j
tbqJ`lk wet-mate series. This series of connectors was originally
developed to provide all the features of the îiJtbq connector
range, but in a miniature industry standard configuration. The split
connector range prevents costly 'Y' assemblies and allows ease of
replacement of break-outs by the customer. This smaller connector
series offers the same flexibility and reliability as pb^=`lk's standard rubber molded connectors, in a lightweight and user-friendly
model.
TESTING
The j= tbqJ`lk= p range has undergone complete
Qualification testing including low pressure soak tests, full mate/demate and high pressure cycling to 10,000 psi.
SPECIAL ASSEMBLIES
AVAILABILITY
The j=tbqJ`lk=p series is currently available in six different
configurations ranging from 6 to 16 contacts rated upto 600 VDC
(dependent on cable) with a mated pressure rating of 10,000 psi.

needs.
APPLICATIONS
Applications include underwater television and lights, diver communications, ROV systems, submersibles, towed-array cable systems,
current meters, animal migration research and food processing
equipment.
MIL-SPEC programs.

MC - IL - 3/6 - M
M - Male Plug
F - Female Socket
Total Number of Contacts
Number of Contacts Per Sector
IL - In-Line
BH - Bulkhead
DC - Dummy Connector
j tbqJ`lk=p=Series
GENERAL INFORMATION
COMPONENT
MATERIAL
MOLDED BODY
Neoprene
BULKHEAD BODY
Brass (CA #360)
CONTACTS
Brass-gold plated
BULKHEAD N & W
Brass (CA #360)
O-RING
LOCKING SLEEVE
CATEGORY
VALUE
OPEN FACE PRESSURE
Up to 10,000 psi (700 bar) optional and needs to be

specified
MATED PRESSURE
Up to 10,000 psi (700 bar)
VOLTAGE RATING
Up to 600 VDC (dependent on cable)
CURRENT RATING
Up to 19 amps per contact*
>200 megohms @ 300 VDC
CONTACT RESISTANCE
<0.01 ohms
AIR MATE
>1,000 cycles
UNDERWATER MATE
>500
25 to 140F (-4 to 60C)
MOUNTING TORQUE
85 in-lb**
In dry stainless 1/2 long Female threads
Delrin (DuPont trademark for Acetal Resin)
HOOK-UP WIRE
Teflon (Registered trademark for DuPont), #20 AWG
IN-LINE CABLE
MC-5/15
20/5 Neoprene jacket, rubber insulated 2.8 amp (300V).

Color code: Contact 1 Black, Contact 2 White, Contact 3 Red, Contact 4 Green, Contact 5 Orange.
MC-2/6 & MC-2/12
22/2 Neoprene jacket, Teflon (Registered trademark for DuPont) insulated 1.5 amp (600V).
All contacts white and individually identified by color or flagged ends.
MC-8/16
22/8 Neoprene jacket, Teflon (Registered trademark for DuPont) insulated 1.0 amp (600V).
All contacts white and individually identified by color or flagged ends.
MC-3/6 & MC-3/15
22/TSP Neoprene jacket, TSP (Twisted Shielded Pair), Teflon (Registered trademark for DuPont) insulated 1.5 amp
(600V). Color code: Contact 1 Black, Contact 2 White, Contact 3 Shield.
NOTES:
* Maximum carrying capacity for contacts may be affected by cable selection.
** For metal shells only, for other materials contact pb^=`lk for recommendations.
- MWC 19 -
REV VIII
pb ^`lk
j==tbqJ`
`lk==pmifq== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk==pmifq SERIES
MC-BH-F
(6 contacts)
j=tbqJ`lk=p=Bulkhead Connector Female Socket
NOTE:
O-RING SIZE: 2-014
j==tbqJ`
`lk==pmifq SERIES
MC-IL-M
(6 contacts)
j=tbqJ`lk=p In-Line Connector Male Plug
MC-DC-M
OPTIONAL PARTS
j==tbqJ`
`lk==pmifq SERIES
MC-DLS-F
(6 contacts)
j==tbqJ`
`lk==pmifq SERIES
HEX NUT AND WASHER
(6 contacts)
j=tbqJ`lk=p Dummy Locking Sleeve Female Socket
j=tbqJ`lk=p=Bulkhead Connector
STD - BRASS
(Stainless Steel and others available upon request)
NOTES:
For interface details please contact pb^=`lk.
- MWC 20 -
REV VIII
pb ^`lk
j==tbqJ`
`lk==pmifq== SERIES
DIMENSION DETAILS
j==tbqJ`
`lk==pmifq SERIES
MC-BH-F
(12 - 16 contacts)
j=tbqJ`lk=p Bulkhead Connector Female Socket
j==tbqJ`
`lk==pmifq SERIES
MC-IL-M
(12 - 16 contacts)
j=tbqJ`lk=p In-Line Connector Male Plug
MC-DC-M
OPTIONAL PARTS
j==tbqJ`
`lk==pmifq SERIES
MC-DLSA-F/M
(12 - 16 contacts)
j==tbqJ`
`lk==pmifq SERIES
HEX NUT AND WASHER
(12 - 16 contacts)
j=tbqJ`lk=p Dummy Locking Sleeve Female Socket/Male Plug
j=tbqJ`lk=p Bulkhead Connector
STD - BRASS
(Stainless Steel and others available upon request)
NOTES:
For interface details please contact pb^=`lk.
- MWC 21 -
REV VIII
pb ^`lk
j==tbqJ`
`lk==pmifq== SERIES
INTERFACE DETAILS
j==tbqJ`
`lk==pmifq SERIES
MC-BH *
(6 contacts)
THROUGH BORE OPTION
j==tbqJ`
`lk==pmifq SERIES
MC-BH
(6 contacts)
j==tbqJ`
`lk==pmifq SERIES
MC-BH **
(12 - 16 contacts)
THROUGH BORE OPTION
j==tbqJ`
`lk==pmifq SERIES
MC-BH
(12 - 16 contacts)
NOTES:
* This option requires the 7/16 Hex Nut, Washer and MIN 0.88 clearance on low pressure side of wall.
* * This option requires the 7/16 Hex Nut, Washer and MIN 0.94 clearance on low pressure side of wall.
- MWC 22 -
REV VIII
pb ^`lk
j==tbqJ`
`lk==pmifq== SERIES
SIZE
j==tbqJ`
`lk==pmifq CONTACT CONFIGURATIONS (FEMALE FACE VIEW ONLY - NOT TO SCALE)*
MC-BH-2/6-FS SPLIT
MC-BH-3/6-FS SPLIT
12-16
MC-BH-2/12-FS SPLIT
MC-BH-3/15-FS SPLIT
MC-BH-5/15-FS SPLIT
MC-BH-8/16-FS SPLIT
NOTES:
* For male face view contact configurations available please contact pb^=`lk.
- MWC 23 -
REV VIII
pb ^`lk
e ^ k a i f k d m o l ` b a r o b p ^ k a
p m b ` f ^ i ` ^ m^ _ f i f q f b p
pb^ `lk GLOBAL PRODUCTION
Callejon Terrazos #8, Local 2-C,
Las Brisas 1ra. Seccion,
Tijuana, B.C., Mexico C.P. 22610.
TEL: +52 (664) 626-2726
FAX: +52 (664) 686-8922
E-Mail: [email protected]
Website: www.seaconglobal.com
Dial from U.S.A. TEL: +1 (619) 308-7901
TOLL FREE: (888) 562-7072
FAX: +1 (619) 308-7900
pb ^`lk
pb^ `lk
1700 Gillespie Way,
El Cajon, California 92020, USA.
TEL: +1 (619) 562-7071
FAX: +1 (619) 562-9706
Website: www.seaconworldwide.com
pb ^`lk
pb^ `lk US GULF AREA SALES OFFICE

14511 Old Katy Road, Suite 300,
Houston, Texas 77079, USA.
TEL: +1 (281) 599-3509
FAX: +1 (281) 599-3517
pb ^`lk
pb^ `lk US EAST COAST SALES OFFICE

50 Airport Road,
Westerly, RI 02891, USA.
TEL: +1 (401) 348-0155
FAX: +1 (401) 348-0227
pb ^`lk
pb^ `lk FLORIDA SALES OFFICE

Building B, Suite 22,
3959 South Nova Road,
Port Orange, Florida 32127, USA.
TEL: +1 (281) 802-5504
pb^`lk ADVANCED PRODUCTS, LLC

1321 Nelius Road, P.O. Box 767,
Bellville, Texas 77418, USA.
TEL: +1 (979) 865-8846
FAX: +1 (979) 865-8859
Website: www.seacon-ap.com
pb^`lk BRAZIL
Rua Conde de Bonfim 120 sala 212,
Tijuca, Rio de Janeiro,
Brazil, CEP: 20520-053.
TEL #1: +55 (21) 3592-0920
TEL #2: +55 (21) 3594-0920
CELL: +55 (21) 8849-3336
Connectors are designed for installation on one atmosphere vessels.

Contact pb^ `lk for recommendations if using compensated vessels.
I N S TA L L AT I O N
P R O C E D U R E S
Torque values referenced in this literature assume installation into dry

metal threads. For other applications, please contact pb^ `lk for
recommendations.
BULKHEAD CONNECTOR (BC): The BC may be installed using one
of two methods. The preferred method is to spotface the bulkhead surface and thread the hole, then screw the connector by means of a nut
and washer. The bored hole (or threaded hole) should be free of any
burrs and all o-ring sealing surfaces polished to a number 32 finish.
Lubricate the BC o-ring with an appropriate silicone spray or grease
before installing. This lubrication should be applied to form an adequate film. Excessive lubrication is detrimental to the operation of the
connector. Bulkhead nut, if used, should not be over-torqued.
IN-LINE CONNECTOR: Lubricate the sealing areas around the male
pins, using an appropriate silicone spray, or grease lightly.
CARE AND MAINTENANCE

The tbqJ`lk and j tbqJ`lk connectors require very little maintenance. They are designed to be used in harsh environments and
thus limited amounts of dirt and grit do not affect their performance.
It is recommended that, upon disconnecting or retrieving the system,
the connectors be cleaned, to storage (if possible, remate with dummy
plugs). Prior to deployment the following maintenance procedure is
recommended:
1. Demate the connector set.
2. Flush connector interface with fresh water (deionized water if available), remove all dirt, grit and grease.
3. Inspect for damage in sealing areas, excessive corrosion, debonding of the cable and connector interface and cuts in the cable
jacket.
4. Apply thin film of dilectric compound (DC) grease, silicon based, to
sealing areas of male connector and across the face of the female
connector*. If the BC is removed from its housing then replace
facial o-ring and make sure that o-rings are lubricated and in good
condition.
5. Mate the connector halves, wipe away any excess grease off the
interface line of the mated set.
* CAUTION: The use of some oil-based propellants in spray cans can
cause conductivity problems in neoprene.
pb^`lk (europe) LTD

Seacon House, Hewett Road,
Gapton Hall Industrial Estate,
Great Yarmouth, Norfolk, NR31 0RB, UK.
TEL: +44 (0) 1493-652733
FAX: +44 (0) 1493-652840
Website: www.seaconeurope.com
pb^`lk PHOENIX, LLC

15 Gray Lane, Suite 108,
Hopkinton Industrial Park,
Ashaway, RI 02804, USA.
TEL: +1 (401) 637-4952
FAX: +1 (401) 637-4953
Website: www.seaconphoenixllc.com
p b ^ ` l k
Even though these procedures appear simple, only qualified technicians should perform the installation and maintenance.
C A B L E A N D C O N T I N U I T Y P R E S E R VAT I O N
Avoid sharp bends in cables. Cables subjected to vibration or exposed
to seawater drag should be adequately clamped to prevent conductor
fatigue and ultimate failure.
All reasonable efforts have been taken to ensure that the information contained herein is accurate
at the date of publication, but no representation or warranty as to the accuracy or completeness
of such information is intended or to be implied by its inclusion herein. Any and all representations
and warranties pertaining to the information and products referred to herein shall be set forth in
pb^ `lk standard sales order form. In addition, pb^ `lk reserves the right to make
changes to the contents hereof without notice, therefore it is suggested that at the time of inquiry,
the appropriate sales office or factory be contacted directly for verification of published specifications and products availability.
2012 pb^ `lk

ALL RIGHTS RESERVED
REV VIII

Wet Con Micro Wet Con

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Wet Con Micro Wet Con

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wet Con Micro Wet Con

Uploaded by

Copyright:

Available Formats

U N D E R WAT E R E L E C T R I C A L A N D F I B E R O P T I C C O N N E C T O R S

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

PART NUMBER SYSTEM - EXAMPLE

tbqJ`lk Bulkhead Connector

tbqJ`lk In-Line Connector

Locking Sleeves are available for tbqJ`lk connectors as an option.

Dummy connectors are available parts in the tbqJ`lk Series.

tbqJ`lk Delrin (DuPont trademark for

tbqJ`lk Dummy Connector

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

OPEN FACE PRESSURE BULKHEAD Up to 1,000 psi (2,300 ft)

MATED PRESSURE BULKHEAD

Up to 10,000 psi (23,000 ft)

MATED PRESSURE IN-LINES

Up to 20,000 psi (46,000 ft)

600 VDC (with standard cable)

Up to 19 amps per contact

Copper Alloy Gold Plated per ASTM B488

304 Stainless Steel

>500 megohms after wet mating

Nitrile (formerly known as Buna N)

>500 wet matings

#18 AWG SO Cable as standard

25 to 140F (-4 to 60C)

Teflon (Registered trademark for DuPont) type E hook-up

AMPACITY CHART FOR STANDARD PARTS (18 AWG SO CABLE)

STANDARD IN-LINE WIRING COLOR CODE (SO CABLE)

C - HEX FLATS (INCHES)

F - HEX FLATS (INCHES)

C - HEX FLATS (INCHES)

tbqJ`lk Locking Sleeve Female

tbqJ`lk Locking Sleeve Male

MOUNTING TORQUE (INCH POUNDS)

SPOT FACE (INCHES)

Introduction ............................................................................................................................................................................................... MWC 4

Part Number System ................................................................................................................................................................................ MWC 4

General Information .................................................................................................................................................................................. MWC 5

MC-BH-M-DO (2 to 8 Contacts) ........................................................................................................................................................... MWC 8

MC-IL-M (2 to 8 Contacts) .................................................................................................................................................................. MWC 10

MC-DC-M (2 to 8 Contacts) ................................................................................................................................................................ MWC 12

MC-DLS-M (2 to 8 Contacts) .............................................................................................................................................................. MWC 14

Interface Details ...................................................................................................................................................................................... MWC 15

Contact Configurations ........................................................................................................................................................................... MWC 16

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

MCAT ATTACHABLE j tbq`lk

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

PART NUMBER SYSTEM - EXAMPLE

UNDERWATER ELECTRICAL WET-MATE CONNECTORS

OPEN FACE PRESSURE

10,000 psi (700 bar) optional and needs to be specified

10,000 psi (700 bar)

2, 3 & 4 pin 600 VDC

Brass (CA #360)

Up to 19 amps per contact

Nitrile (formerly known as Buna N)

>200 megohms @ 300 VDC

Delrin (DuPont trademark for Acetal Resin)