Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    2557datasheetdekguard PU

    Uploaded by

    Mel Ad
    Dekguard PU is a two-component aliphatic polyurethane coating for concrete and steel structures that provides chemical and UV resistance. It forms a seamless, durable, and easily cleaned surface. It has good resistance to long-term UV exposure and requires reapplication every 2-4 hours. Dekguard PU requires thorough mixing and application in two coats at 80 microns wet film thickness to cured surfaces prepared by grit blasting. It dries within 2-4 hours and fully cures after 5 days, and has a shelf life of 6 months when stored properly.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    2557datasheetdekguard PU

    Uploaded by

    Mel Ad
    79 views2 pages
    Dekguard PU is a two-component aliphatic polyurethane coating for concrete and steel structures that provides chemical and UV resistance. It forms a seamless, durable, and easily cleaned surface. It has good resistance to long-term UV exposure and requires reapplication every 2-4 hours. Dekguard PU requires thorough mixing and application in two coats at 80 microns wet film thickness to cured surfaces prepared by grit blasting. It dries within 2-4 hours and fully cures after 5 days, and has a shelf life of 6 months when stored properly.

    Original Description:

    dekguard pu

    Original Title

    2557datasheetDekguard PU

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Dekguard PU is a two-component aliphatic polyurethane coating for concrete and steel structures that provides chemical and UV resistance. It forms a seamless, durable, and easily cleaned surface. It has good resistance to long-term UV exposure and requires reapplication every 2-4 hours. Dekguard PU requires thorough mixing and application in two coats at 80 microns wet film thickness to cured surfaces prepared by grit blasting. It dries within 2-4 hours and fully cures after 5 days, and has a shelf life of 6 months when stored properly.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    79 views2 pages

    2557datasheetdekguard PU

    Uploaded by

    Mel Ad
    Dekguard PU is a two-component aliphatic polyurethane coating for concrete and steel structures that provides chemical and UV resistance. It forms a seamless, durable, and easily cleaned surface. It has good resistance to long-term UV exposure and requires reapplication every 2-4 hours. Dekguard PU requires thorough mixing and application in two coats at 80 microns wet film thickness to cured surfaces prepared by grit blasting. It dries within 2-4 hours and fully cures after 5 days, and has a shelf life of 6 months when stored properly.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Dekguard PU

    Two component aliphatic polyurethane protective coating for concrete and steel structures
    Uses Dekguard PU provides an easily cleaned chemical and UV resistant protective coating, and suitable for external waterproofing also. Advantages Durable : Low maintenance costs Non yellowing : Will not yellow on exposure to UV rays. Hygienic : Seamless surface, easily cleaned Impermeable: gases Description Dekguard PU is a two component, pigmented, aliphatic polyurethane coating possessing good resistance to long term exposure of UV rays. Technical Support Fosroc offers technical support and service to specifiers and contractors as well as on-site assistance. Properties Pot life at 300C Recoat time at 300C Initial cure at 300C Final cure at 300C Flash point : Min. 3 hours : 2 - 4 hours : 16 hours : 5 days : 35 0 C Excellent resistance to chemicals and Mixing

    constructive solutions

    The individual components should be thoroughly stirred before mixing them together. The components should then be mechanically mixed together for atleast 3 minutes using a slow speed ( 400 - 500 RPM) drill machine attached with a mixing paddle. Application Apply Dekguard PU with a nylon brush, or a flat pile felt roller, to the prepared substrate at a wet film thickness of 80 microns ( 40 microns DFT) . Allow Dekguard PU first coat to dry for 24 hours at 300C and then apply the second coat. Curing This coating will become tack free in approximately 2 - 4 hours and be fully cured in 5 days. Number of coats Two finish coats are recommended unless used as a top coat for freshly applied epoxies. Cleaning Clean tools and equipment immediately after use with Nitocote Sol. Wash hands and skin with soap, or an industrial hand cleaner. Limitations Minimum ambient surface and material temperature must be between 10 to 400C. For applications outside this range, contact Fosroc for advise. Application of the product should be always on dry substrates. Moisture in the substrate can lead to pin holes and blisters in the coating.

    Application instructions
    Surface preparation

    Storage
    Shelf life

    All surfaces must be smooth, sound and free from debris, loose or flaking material and areas of standing water. Surfaces must be free from contamination such as oil, grease, dust, loose particles and organic growth. Concrete surfaces must be fully cured, laitence free and free from any traces of shuttering, release oils and curing compounds. All surfaces should then be grit blasted to remove all foreign matter and open up blow-holes, and provide a suitable key for Dekguard PU. All blow holes and imperfections should be filled with a suitable putty.

    Dekguard PU has a shelf life of 6 months when stored under normal warehouse conditions in unopened containers. Exposure to moisture greatly reduces the shelf life, particularly that of the hardener.

    Dekguard PU

    page 1 of 2

    Dekguard PU

    Estimating
    Packaging Dekguard PU is supplied as base and hardner in preweighed quantities packed together in an outer carton. The mixed material will yield 4 litres. Coverage The theoretical coverage is 10 sq.m /ltr/coat at 30 - 40 microns DFT. However practical coverage may vary depending on the porosity of substrate, application thickness etc.

    Precautions Health & Safety Rubber gloves and/or barrier creams, protective clothing, goggles and respirator should be worn. Provide sufficient mechanical and/or local exhaust ventilation to maintain easy working conditions.

    Fosroc Chemicals (India) Pvt. Ltd.


    Head Office Sapthagiri Palace, No.38, II & III Floor, 12th Cross, CBI Road, Ganganagar North, Bangalore 560 032

    Important note : Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products whether or not in accordance with any advice, specification, recommendation or information given by it.
    telephone ++91 80-23551500 fax ++91 80-23551510 e-mail [email protected]

    Regional Offices

    Bangalore
    Sapthagiri Palace, No. 38 II & III Floor, 12th Cross, CBI Road, Ganganagar North, Bangalore 560 032. Ph:080-23551500 Fax : 080-23551510

    Mumbai
    1401/1402, 14 Floor, A-WingThe Great Eastern Summit Sector-15, CBD, Belapur Navi Mumbai 400 614 Ph: 022 -43406800-04

    Noida
    D-166 Sector 10 Noida, UP 201 301 Ph:0120-4270620

    Kolkata
    304, Jodhpur Park Kolkata 700 068 Ph:033-65343188 Fax: 033-2499-0280

    www.fosroc.com
    page 2 of 2
    INDIA/2011/729/A

    You might also like