Scribd
Upload
140 views

Machine Vice Tutorial

The document provides step-by-step instructions for creating a 3D model of a machine vice in a CAD program. It describes creating individual parts like the body, movable jaw, jaw grip, screw, rod, washer, nut and clamping plate through sketches and extruding/cutting profiles. Precise dimensions and procedures are given for features like holes, threads, rounds and symmetric cuts on various planes of each part to assemble the complete machine vice model.

Uploaded by

Hareesha N G
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

Machine Vice Tutorial

The document provides step-by-step instructions for creating a 3D model of a machine vice in a CAD program. It describes creating individual parts like the body, movable jaw, jaw grip, screw, rod, washer, nut and clamping plate through sketches and extruding/cutting profiles. Precise dimensions and procedures are given for features like holes, threads, rounds and symmetric cuts on various planes of each part to assemble the complete machine vice model.

Uploaded by

Hareesha N G
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

Tutorial on Machine vice

Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78

4/16/2013

Hareesha N G, DSCE, Blore-78

Machine vice Assembly

4/16/2013

Hareesha N G, DSCE, Blore-78

Exploded view of machine vice

4/16/2013

Hareesha N G, DSCE, Blore-78

Exploded view of machine vice

4/16/2013

Hareesha N G, DSCE, Blore-78

Part 1: Body Sketch on front plane or XZ plane as shown in fig. Sym protrusion distance 100 mm. Create round R 10mm

4/16/2013

Hareesha N G, DSCE, Blore-78

Sketch on Top face or XY plane as shown in fig. Cut out using depth 57 mm Create rounds at all corners Rad 5mm

4/16/2013

Hareesha N G, DSCE, Blore-78

Sketch on the plane as shown in fig. select outer rectangle cutout giving 10mm depth. select inner rectangle cutout giving 13 mm depth.

4/16/2013

Hareesha N G, DSCE, Blore-78

Select the plane as shown in fig. create sketch,. Protrude it giving 5mm height. Create round using rad 5mm. Mirror to other side.

4/16/2013

Hareesha N G, DSCE, Blore-78

Select the plane as shown in fig. create sketch,. Protrude it giving 20 mm height. Mirror to other side.

4/16/2013

Hareesha N G, DSCE, Blore-78

Select the parallel plane as shown in fig. create sketch,. Protrude it giving 3 mm height. Mirror to other side.

4/16/2013

Hareesha N G, DSCE, Blore-78

10

Select the plane as shown in fig. create hole of dia 20mm. Select the other end as shown in fig. create hole of dia 12 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

11

Select the plane as shown in fig. set hole options as shown. Place the holes as shown. Create threaded holes as shown in fig.

4/16/2013

Hareesha N G, DSCE, Blore-78

12

Select the plane as shown in fig. set hole options as shown. Place the holes as shown.

Counter sink holes, use up-to next


4/16/2013 Hareesha N G, DSCE, Blore-78 13

Part 2: Movable Jaw Sketch on front plane or XZ plane as shown in fig Symmetric protrusion distance 100 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

14

Select the plane as shown. Create sketch as shown. Cut out through all

4/16/2013

Hareesha N G, DSCE, Blore-78

15

Select the plane as shown. Create threaded holes as shown use the dimensions given in sketch as shown.

4/16/2013

Hareesha N G, DSCE, Blore-78

16

Select the plane as shown. Create threaded holes as shown use the dimensions given in sketch as shown.

4/16/2013

Hareesha N G, DSCE, Blore-78

17

Part 3: Jaw Grip


Sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create counter sink hole of diameter 6.3 mm, countersink dia of 12 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

18

Part 4: Screw M6
Step 1: Revolved protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800

4/16/2013

Hareesha N G, DSCE, Blore-78

19

Part 5: Screw Rod Step 1: Revolved Protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800

4/16/2013

Hareesha N G, DSCE, Blore-78

20

Step 2: Cut out & Thread Sketch on Right plane or YZ plane as shown in fig Use symmetric cut out through all Create thread on cylindrical body

4/16/2013

Hareesha N G, DSCE, Blore-78

21

Part 6: Washer Create sketch on top plane or XY plane as shown in fig Symmetric protrusion distance 3 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

22

Part 7: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

23

Part 8: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 5 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

24

Part 8: Clamping Plate Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create countersink hole of dia 6.3 mm and countersink dia 12 mm

4/16/2013

Hareesha N G, DSCE, Blore-78

25

You might also like