Scribd Logo
Upload

Welcome to Scribd!

  • 124 views

    Switch 5700

    Uploaded by

    BlAdE 12
    Stratix 5700(tm) is a compact and scalable Layer 2 managed switch with Cisco technology embedded. The switch is designed to provide scalable solutions, minimizing size and cost for deploying information enabled machines.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Switch 5700

    Uploaded by

    BlAdE 12
    124 views4 pages
    Stratix 5700(tm) is a compact and scalable Layer 2 managed switch with Cisco technology embedded. The switch is designed to provide scalable solutions, minimizing size and cost for deploying information enabled machines.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Stratix 5700(tm) is a compact and scalable Layer 2 managed switch with Cisco technology embedded. The switch is designed to provide scalable solutions, minimizing size and cost for deploying information enabled machines.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    124 views4 pages

    Switch 5700

    Uploaded by

    BlAdE 12
    Stratix 5700(tm) is a compact and scalable Layer 2 managed switch with Cisco technology embedded. The switch is designed to provide scalable solutions, minimizing size and cost for deploying information enabled machines.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Stratix 5700 Industrial Ethernet Switch

    Benefits
    Management and diagnostics from within both IT and controls environment Simple device replacement via SD card that holds the configuration for easy swap out Default configurations for industrial automation and EtherNet/IP devices (Global and Smartports) Security features help ensure that only authorized devices, users and traffic can access and traverse the network Right-size network infrastructure with scalable hardware and software configurations

    Best of Rockwell Automation


    Premiere integration (CIP) to the Integrated Architecture Configuration via Full Add-on-Profile in Logix Editors (RSLogix 5000 software, V16-V20, or Studio 5000 Logix Designer, V21 and beyond) Predefined Logix tags for diagnostics FactoryTalk View Faceplates for status monitoring and alarming

    The wide deployment of EtherNet/IP in industrial automation means there is a growing demand to properly manage the network. New machines can add 5-50 Ethernet nodes, every line can add 250-1,000 nodes, and as new products are developed we add more nodes. Getting these machine level networks integrated into the plant network requires a converged network, where now there are many more devices connected on the same flat Ethernet network. An industrial managed switch can help you simplify the network infrastructure and machine integration into that existing network infrastructure, referred to as a converged network. The Allen-Bradley Stratix 5700 is a compact and scalable Layer 2 managed switch with Cisco technology embedded. Automation professionals can apply this switch to applications from small isolated to complex networks, monitor and control distributed devices and to integrate the plant floor to the enterprise systems. By choosing a switch that is co-developed by Rockwell Automation and Cisco, your operations and IT professionals leverage technology that is familiar to them and better enables collaboration to meet their business goals.

    Best of Cisco
    Secure integration with enterprise network Cisco Internet Operating System (IOS) Cisco Catalyst switch architecture/feature set Common IT development and management tools; Command Line Interface (CLI), Device Manager and Cisco Prime LAN Management Solution (previously CiscoWorks)

    Stratix Add on Profile (AOP)

    Hardware Configurations
    Designed to provide scalable solutions, minimizing size and cost for deploying information enabled machines. There are three base port configurations. Each base model comes with dual power inputs, input and output alarms, console port, fiber-ready SFP slots1, DIN rail mount and operating temperature range of -40C 60C. Model options include: two Gb ports, SD flash card, IEEE 1588 support, conformal coating, and two different software configurations. Base Configurations 6, 10, or 20 port:

    6 copper ports or 4 copper ports + 2 SFP slots 130mm x 75mm x 109mm


    1Multi and single mode SFPs are sold separately

    8 copper ports + 2 combo (copper or SFP slots) ports 130mm x 91mm x 109mm or 130mm x 91mm x 128mm

    16 copper + 2 combo ports + 2 SFP slots 130mm x 127mm x 128mm

    Designed & Developed for EtherNet/IP Automation Applications


    Optimized network performance Quality of Service (QoS) - Default configurations are set to ODVA standards for EtherNet/IP industrial applications for discrete, motion, safety and process applications CIP Sync (1588) - ODVA implementation of the IEEE IEC 61588 precision time protocol ensures performance when connecting EtherNet/IP devices Secure/limit access to the machine CIP port control and fault detection With your Logix program you can enable/disable port access based on the controller program or controller mode (idle/fault) to limit access to the network based on machine conditions Simplify design, deployment and maintainability DHCP per port - Assign a specific IP address to each port, ensuring that the device attached to a given port will always get the same IP address Broken Wire Detection - Detect cabling problems like, open, broken, cut or shorted twisted-pair wires, with status availability in the Logix Designer application Network Address Translation NAT A 1:1 IP address translation to help segment machine level network devices from the plant network, translate only the devices that need to be visible to the plant network (Future Release 1.5 Q1CY13)

    Securing Production & Meeting Standards


    Simplified tools are provided to help protect the machine and maximize network performance, and advanced security feature sets help IT professionals meet their standards and policies. Protecting the Machine Application/Project (CIP) based port access - Controller based port control (on/off) - Port access based on controller mode (idle/fault) - Unauthorized device identification (tags) per port Configurable port security - Preconfigured port security set-up via smartports - Configure number of devices allowed per port - Configurable device MAC ID authentication

    Flexible Topologies for Reliability


    When network availability is critical to your application, the Stratix 5700 supports a wide selection of resiliency and redundancy features and functionality. Spanning Tree Protocol (STP/RSTP/MST/PVST+/RPVST+) <1sec recovery time Resilient Ethernet Protocol (REP) Ring Topology <70ms recovery time Flex Links Redundant Star Topology <60msec recovery time EtherChannel Redundant Star Topology - <100msec recovery time Port link aggregation - load sharing & redundancy

    Protecting the Plant Encrypted administrative traffic - SSHv2, SNMPv3, and HTTPS Advanced security features - 802.1x for user authentication - Multiple layers of password protection - Access Control Lists (ACLs) to apply security policies per port - TACACS+ and Radius for centralized authentication

    REP

    Rockwell Automation & Cisco Working Together


    Rockwell Automation and Cisco are committed to being the most valuable resource in the industry for helping manufacturers improve business performance by bridging the technical and cultural gaps between plant floor and higher-level information systems. Through successful collaboration on products, services and educational resources, we help manufacturers converge and simplify their network infrastructure and tightly integrate technical and business systems using EtherNet/IP the worlds leading open industrial Ethernet network.

    Cisco technology allows the Stratix 5700 to support ring, ring segments, and nested ring segments.

    Allen-Bradley, FactoryTalk View, Integrated Architecture, Logix, Rockwell Automation, Studio 5000 Logix Designer and Stratix 5700 are trademarks of Rockwell Automation. Trademarks not belonging to Rockwell Automation are property of their respective companies.

    Publication ENET-PP005B-EN-E September 2012


    Supersdes Publication ENET-PP005A-EN-E November 2011

    Copyright 2012 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.

    You might also like