Fci Connector Catalog
Fci Connector Catalog
Fci Connector Catalog
Introduction
FCI, Framatome Connectors International, is the worlds second largest manufacturer of connectors and the only European company amongst the top ten. FCI is operating more than 60 production plants in 29 countries, and has its headquarters in Paris, France. FCI employs more than 21,000 people in Europe, Asia and the Americas. FCIs global product range is wider than most of its competitors. Combining the strengths of its operating subsidiaries, FCI occupies a leadership position in the communications, data, consumer, industrial & instrumentation, military and aerospace, energy and automotive markets. Its expertise in interconnection technologies, its industrial competence, a continuous investment in R&D together with a coordinated global sales and distribution network makes FCI the first choice as a partner for every type of industry.
Selection
Innovation
Circuitry and cable
Flexible Printed Circuit (FPC) Flexible Flat Cable (FFC) Conductive Ink Circuitry (CIC)
Reliability
Cable lock
Economy
Cable Lock alignment system
Ensures proper alignment during mating and prevents unintentional cable release
FPC
FFC
CIC
Contact pressure
Tin or solder plating Contact Conductor Gas tight high pressure contact area
Upside contact
Connector
Contacts
Downside contact
Cable
Contents
0.30 mm spacing
page
62789 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
0.50 mm spacing
62674 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 62684 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 SFV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1.00 mm spacing
SFW Series HFW Series SLW Series HLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
2.54 mm spacing
DUFLEX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 CLINCHER Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
GENERAL
Product chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Circuitry lay-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-31 Performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Series at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Exit
Contents
More
Features s Available in 27, 33, 39, 45, 51, 57 positions s Right angle s Excellent cable retention with small size slider
Benefits s s s s Low profile of 2.00 mm Flip-Top cover rotates back 100 degrees for easy cable positioning. Staggered PCB layout enables space savings and easy soldering. The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation.
Technical Data
Material
Housing : Slider : Contact : Thermoplastic Resin, White Thermoplastic Resin, Black Phosphor Bronze, Tin alloy plated
Dimensions B = 0.30 x total number of positions - 0.30 C = 0.30 x total number of positions - 0.90
Exit
Contents
Back
Next
Ordering Data
Series
Dimensions
Dimensions A = 0.30 x total number of positions + 2.10 B = 0.30 x total number of positions - 0.30 C = 0.30 x total number of positions - 0.90
Exit
Contents
More
Features s Available in 12, 20, 24, 25, 30 positions s Vertical s Excellent cable retention with small size slider s Cable lock option
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance. s The cable lock option provides cable strain relief as well as full retention of cable.
Technical Data
Material
Housing : Slider : Contact : Resin, glass reinforced, UL94V-0, Black Resin, glass reinforced, UL94V-0, Brown (with cable-lock : Black) Phosphor Bronze, Tin alloy plated
Exit
Contents
Back
Next
Ordering Data
Series
62674 - Positions 11 2 1
Cable lock 2 = without cable lock 3 = with cable lock Tape and reel : 1000 pcs.
Number of contacts 12, 20, 24, 25, 30 (for other number of positions, please contact FCI)
Dimensions
Packaging
Dimensions A = 0.50 x total number of positions + 4.50 0.20 B = 0.50 x total number of positions + 3.90 0.20 C = 0.50 x total number of positions - 0.50 0.10 D (with cable lock) = 0.50 x total number of positions - 0.40 0.10 D (without cable lock) = 0.50 x total number of positions + 0.700.10
Exit
Contents
More
Features s Available in 32, 34, 40, 45, 50 positions s Right angle s Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance.
Technical Data
Material
Housing : Slider : Contact : Glass filled thermoplastic, UL94V-0, Beige Glass filled thermoplastic, UL94V-0, Black Phosphor Bronze, Tin alloy plated
10
Exit
Contents
Back
Next
Ordering Data
Series
62684 - Positions 2 10 0
Packaging Tape and reel : 2000 pcs.
Number of contacts 32, 34, 40, 45, 50 (for other number of positions, please contact FCI) Terminal type 1 = downside contact 2 = upside contact
Dimensions
Dimensions A = 0.50 x total number of positions B = 0.50 x total number of positions C = 0.50 x total number of positions D = 0.50 x total number of positions
upside contact
downside contact
11
Exit
Contents
More
Features s s s s s Available in 4 to 35 positions Right angle Cable lock option Top and bottom contacts Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s The cable lock option provides cable strain relief as well as full retention of cable. s Fork shaped contacts mean stable and low contact resistance. s Product variations cover a broad range of applications. Technical Data
Material
Housing : Black Slider : Contact : Polyamide Resin, glass reinforced, UL94V-0, PPS Resin, glass reinforced, UL94V-0, Brown (with cable-lock : Black) Phosphor Bronze, Tin alloy plated
12
Exit
Contents
Back
Next
Ordering Data
Series
SFV
4 to 35
20 R - 1 ST E1
Packaging E1 = tape-and-reel :3000 pcs. E3 = tape-and-reel :200 pcs.
Number of contacts
Terminal type R = side entry PCB mounting ST = SMT type Cable type 1 2 3 4 = = = = FPC/FFC downside contact FPC/FFC upside contact FPC (with cable-lock) downside contact FPC (with cable-lock) upside contact
upside contact
_ 0.20 0,5 x total no. of pos +5.5 +
_ 0.20 0,5 x total no. of pos +3.9 + _ 0.20 0,5 x total no. of pos +5.5 + _ 0.10 0,5 x total no. of pos +0.7 + 0,5 x total no. of pos -0.5
_ 0.20 0,5 x total no. of pos +3.9 + _ 0.20 0,5 x total no. of pos +5.5 + _ 0.10 0,5 x total no. of pos +0.7 + 0,5 x total no. of pos -0.5
13
Exit
Contents
SFW series - ZIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions (right angle) and 4 to 32 positions (straight) s Top and Bbottom contacts s Cable lock option s Optional mounting devices ( straight) s Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s The cable lock option provides cable strain relief as well as full retention of cable. s Fork shaped contacts mean stable and low contact resistance. s Product variations cover a broad range of application. s Optional mounting devices provide PCB hold-down and strain relief for SMT tails, highly desirable for lower positions. Technical Data
Material
Housing : For Right angle version: PPS, glass reinforced, UL94V-0 For FPC / FCC : housing color: Brown (with cable-lock: Black) slider color : Black (with cable-lock: Brown) For CIC : housing color: Brown (with cable-lock: Black) slider color : Black (with cable-lock: Brown) For Vertical version: Heat-resisting Resin, glass reinforced, UL94V-0 housing color: Brown; slider color : Black Contact : Phosphor Bronze, Tin alloy plated
14
Exit
Contents
SFW series - ZIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
SFW 20 R - 1 ST E1
4 to 30
Number of contacts
Packaging Right angle E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs Straight E1 = tape-and-reel 1000 pcs
PCB mounting ST = SMT type STM = SMT with mounting device (top entry only) 5 6 7 8 = = = = CIC CIC CIC CIC downside contact upside contact (with cable-lock) downside contact (with cable-lock) upside contact
Cable type
1 = FPC/FFC downside contact 2 = FPC/FFC upside contact 3 = FPC (with cable-lock) downside contact 4 = FPC (with cable-lock) upside contact (cable types 1, 3, 4, 5, 7, 8 for side entry only)
Straight
_ 0.20 1 x total no. of pos +6.4 + _ 0.20 1 x total no. of pos -1.0 +
15
Exit
Contents
HFW series - LIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions (right angle) and 4 to 33 positions ( straight) s Top and bottom contacts s Optional mounting devices ( straight)
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Low Insertion Force (LIF) contacts positioning provides a reliable and easy mating operation. s Fork shaped contacts mean stable and low contact resistance. s Optional mounting devices provide PCB hold-down and strain relief for SMT tails, highly desirable for lower positions. Technical Data
Material
Housing : Polyamide 6T, glass reinforced, UL94V-0, Black Contact : Phosphor Bronze, Tin alloy plated
16
Exit
Contents
HFW series - LIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
HFW 20 R - 1 ST E1
Packaging Right angle Straight E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs E1 = tape-and-reel 1000 pcs
No of contacts 4 to 33 (Straight) 4 to 30 (Right angle) Terminal type R = Right angle S = Straight Cable type 2 6 1 2 = = = =
FPC/FFC (Straight) CIC (Straight) FPC/FFC downside contact (Right angle) FPC/FFC upside contact (Right angle)
Straight
_ 0.20 1 x total no. of pos +3.0 + _ 0.20 1 x total no. of pos -1,0 +
_ 0.20 1 x total no. of pos +1.14+ _ 0.20 1 x total no. of pos -1,0 +
_ 0.20 1 x total no. of pos +1.14+ _ 0.20 1 x total no. of pos -1,0 +
17
Exit
Contents
SLW series - ZIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions s Right angle or vertical type s Excellent cable retention with small size slider s Kinked solder tails available
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance. s Kinked solder tails provide added PCB retention. s Product variations cover a broad range of applications. Technical Data
Material
Housing : Nylon, glass reinforced, UL94V-0, Black Slider : Nylon, glass reinforced, UL94V-0, Black (For CIC : Milky-White) Contact : Phosphor Bronze, Tin alloy plated
18
Exit
Contents
SLW series - ZIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
SLW 25 S - 1 C7
Variation C7 = for 0.8 mm dia. through-hole
No of contacts 4 to 30 Terminal type R = Right angle S = Straight Cable type 1 = FPC/FFC 5 = CIC
Tray packaging
_ 0.30 1 x total no. of pos +1.2 + _ 0.30 1 x total no. of pos +6.2 + _ 0.30 1 x total no. of pos +1.2 + _ 0.30 1 x total no. of pos +6.2 +
19
Exit
Contents
HLW series - LIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 32 positions s Right angle and vertical type s Kinked solder tails available
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Low Insertion Force (LIF) contacts positioning provides a reliable and easy mating operation. s Fork shaped contacts mean stable and low contact resistance. s Kinked solder tails provide added PCB retention.
Technical Data
Material
Housing : Contact : PBT, glass reinforced, UL94V-0, Black Phosphor Bronze, Tin alloy plated
20
Exit
Contents
HLW series - LIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
HLW 10 R - 2 C 7
Variation A7 = non-kinked terminal C7 = kinked terminal Tray packaging
No of contacts 4 to 32 Terminal type R = Right angle S = Straight Cable type 2 = FPC/FFC 6 = CIC
Dimensions
Right angle
_ 0.30 1 x total no. of pos +2.6 +
_ 0.10 1 x total no. of pos +1.12 +
_ 0.30 1 x total no. of pos -1.0 +
Straight
_ 0.30 1 x total no. of pos +2.6 +
_ 0.10 1 x total no. of pos +1.12 +
_ 0.30 1 x total no. of pos -1.0 +
kinked terminal
non-kinked terminal
kinked terminal
non-kinked terminal
21
Exit
Contents
More
Features s s s s s s s s s s Available in 2 to 36 positions per row Single or double row Gold or tin plated option Gas tight Highly reliable Insulation Displacement Contact (IDC) termination technique Low-cost connection system Versatility Long-life contacts Mates with 0.62 mm square or round pins as short as 5 mm Dedicated application equipment
Benefits s Ideal for large-volume users. s Mass-termination reduces overall applied costs and time. s Contacts fitting all housing styles ensures versatility and minimizes stock values.
Technical Data
Material
Housing : Contact : Thermoplastic Polyester, glass reinforced, UL94V-0, Blue Phosphor Bronze, Gold-duplex or Tin alloy plated
Cable specification Specification: Thickness: Insulation material: Conductor Thickness: Conductor width: Conductor pitch: Thickness for non standard cable: Mating pin: IPC Standard FC-220C. Cables type A or B 0.305 0.025 mm(0.0120.0001 inch) incl. insulation Mylar, Kapton or Nomex (polyester/polyamide) 0.076 0.013 mm (0.0030.0005 inch), 305 gr/m2 0.127 0.013 mm (0.0050.0005 inch), 610 gr/m2 1.57 0.07 mm (0.0620.003 inch) 2.54 0.05 mm (0.1000.002 inch) 0.11 - 0.35 mm (0.004 - 0.013 inch) 0.64 mm square (0.025 inch), min. 5.00 mm(0.196 inch) length
Cable specification and application data sheet TA 338 and TA 333 on request
22
Exit
Contents
Back
Next
Ordering Data
Housing
5 digit partnumber
- 0 02
Number of contacts per row = 02 to 36
Contact
Plating
76785
- 3 01
Packaging
01 = 15000 11 = 3000
contact area, tin-lead cable area, contact area, tin-lead cable area,
0.30N min./0.60N max. insertion force 0.30N min./0.60N max. insertion force
Dimensions Contact
Housing
Single row
Double row
Dimensions in mm
23
Exit
Contents
More
Features s Available in 2 to 32 positions s Gas-Tight, High pressure (GTH) s Gold and tin plated option s Pre-assembled s Snap-shut s Long-life contacts s Mates with 0.62 mm square or round pins s Dedicated application equipment
Benefits s Pre-assembled connectors reduce overall applied costs and ensure full contact protection. s Snap-shut allows a single connection operation and therefore increases assembly speed.
Technical Data
Material
Housing : Contact : Polypropylene, glass reinforced, UL94V-0, Blue brass, Gold or Tin alloy plated
Cable specification Specification: Thickness: Insulation material: Conductor Thickness: Conductor width: Conductor pitch: Thickness for non standard cable: Mating pin: IPC Standard FC-220C. Cables type A or B 0.305 0.025 mm(0.0120.0001 inch) incl. insulation Mylar, Kapton or Nomex (polyester/polyamide) 0.076 0.013 mm (0.0030.0005 inch), 305 gr/m2 0.127 0.013 mm (0.0050.0005 inch), 610 gr/m2 1.57 0.07 mm (0.0620.003 inch) 2.54 0.05 mm (0.1000.002 inch) 0.11 - 0.35 mm (0.004 - 0.013 inch) 0.64 mm square (0.025 inch), min. 5.00 mm(0.196 inch) length
Cable specification and application data sheet TA 264, TA 371 and TA 372 on request
24
Exit
Contents
Back
Next
Ordering Data
Series
5 digit partnumber
- 0 02
Number of positions see table
0 = standard version 1 = for Thin film circuits ( 0.15 mm max. thickness) Female Receptacle only
Gold plated Tin plated code positions code positions 63 = 2 pos. 02 = 2 pos. 62 = 3 pos. 03 = 3 pos. 33 = 4 pos. 04 = 4 pos. 34 = 5 pos. 05 = 5 pos. 35 = 6 pos. 06 = 6 pos. 36 = 7 pos. 07 = 7 pos. 37 = 8 pos. 08 = 8 pos. 38 = 9 pos. 09 = 9 pos. 39 = 10 pos. 10 = 10 pos. 40 = 11 pos. 11 = 11 pos. 41 = 12 pos. 12 = 12 pos. 42 = 13 pos. 13 = 13 pos. 43 = 14 pos. 14 = 14 pos. 44 = 15 pos. 15 = 15 pos. 45 = 16 pos. 16 = 16 pos. 46 = 17 pos. 17 = 17 pos. 47 = 18 pos. 18 = 18 pos. 48 = 19 pos. 19 = 19 pos. 49 = 20 pos. 20 = 20 pos. 50 = 21 pos. 21 = 21 pos. 51 = 22 pos. 22 = 22 pos. 52 = 23 pos. 23 = 23 pos. 53 = 24 pos. 24 = 24 pos. 54 = 25 pos. 25 = 25 pos. 55 = 26 pos. 26 = 26 pos. 56 = 27 pos. 27 = 27 pos. 57 = 28 pos. 28 = 28 pos. 58 = 29 pos. 29 = 29 pos. 59 = 30 pos. 30 = 30 pos. 60 = 31 pos. 31 = 31 pos. 61 = 32 pos. 32 = 32 pos. 66 = 34 pos. 64 = 34 pos.
Gold plated Tin plated code positions code positions 34 = 2 pos. 02 = 2 pos. 35 = 3 pos. 03 = 3 pos. 36 = 4 pos. 04 = 4 pos. 37 = 5 pos. 05 = 5 pos. 38 = 6 pos. 06 = 6 pos. 39 = 7 pos. 07 = 7 pos. 40 = 8 pos. 08 = 8 pos. 41 = 9 pos. 09 = 9 pos. 42 = 10 pos. 10 = 10 pos. 43 = 11 pos. 11 = 11 pos. 44 = 12 pos. 12 = 12 pos. 45 = 13 pos. 13 = 13 pos. 46 = 14 pos. 14 = 14 pos. 47 = 15 pos. 15 = 15 pos. 48 = 16 pos. 16 = 16 pos. 49 = 17 pos. 17 = 17 pos. 50 = 18 pos. 18 = 18 pos. 51 = 19 pos. 19 = 19 pos. 52 = 20 pos. 20 = 20 pos. 53 = 21 pos. 21 = 21 pos. 54 = 22 pos. 22 = 22 pos. 55 = 23 pos. 23 = 23 pos. 56 = 24 pos. 24 = 24 pos. 57 = 25 pos. 25 = 25 pos. 58 = 26 pos. 26 = 26 pos. 59 = 27 pos. 27 = 27 pos. 60 = 28 pos. 28 = 28 pos. 61 = 29 pos. 29 = 29 pos. 62 = 30 pos. 30 = 30 pos. 63 = 31 pos. 31 = 31 pos. 64 = 32 pos. 32 = 32 pos.
Dimensions in mm
25
Exit
Contents
General
Next
Circuitry lay-outs
Bill of Material
1 2 3 4
Polyamide or Polyester or Equivalent Copper Foil (Solder Plated 1 m min.) Polyamide or Polyester or Equivalent Polyamide or Polyester or Equivalent
1 2 3
Flame Resistant Polyester or Equivalent Copper Foil (Tin or Solder Plated 1 m min.) Flame Resistant Polyester or Equivalent
1 2 3 4
Polyester or Equivalent Carbon Paste over Silver Paste Polyamide or Polyester or Equivalent Polyamide or Polyester or Equivalent
26
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC for 62789 Series
no.of pos.
Dimensions in mm
27
Exit
Contents
General
Back
Next
Circuitry lay-outs
FFC for 62684 Series FPC for 62684 Series
Dimensions in mm
28
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC cable lock for SFV Series FFC for SFW Series
Dimensions in mm
29
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC cable lock for SFW Series FFC for HFW straight Series
Dimensions in mm
30
Exit
Contents
General
Back
Next
Circuitry lay-outs
FFC for SLW Series FPC for SLW Series
Dimensions in mm
31
Exit
Contents
General
Back
Next
Performance characteristics
Spacing Circuitry Series Electrical Current Rating Rated Voltage (AC/DC) Contact Resistance (initial) Insulation Resistance Dielectic withstanding Voltage Mechanical Durability Cycle Vibration Environmental Salt Spray Damp Heat (steady state) Change of Temperature Operating temperature Range
2.54 mm
DUFLEX CLINCHER
Contact resistance : 50m max. 20 20 per JIS C 0040 20 30 20 30 30 No discontinuity greater than 1 second
32
Exit
Contents
General
Back
Next
Series at a glance
Series
Pitch
Cable Type
ZIF / LIF
Soldering
Number of Positions
62789 62674 62684 SFV SFR HFR SFW HFW SLW HLW SFD SLD SLP SLEM HLEM Clincher Duflex
0.30 mm 0.50 mm 0.50 mm 0.50 mm 0.80 mm 0.80 mm 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 mm mm mm mm mm mm mm mm mm
FPC FFC/FPC FFC/FPC FFC/FPC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC
ZIF ZIF ZIF ZIF ZIF LIF ZIF LIF ZIF LIF ZIF ZIF ZIF ZIF LIF -
SMT SMT SMT SMT SMT SMT SMT SMT DIP DIP SMT DIP DIP DIP DIP -
4,6,21,26 4 to 40 4 to 20 4 to 30 3 to 40 2 to 32 2 to 72
2.54 mm 2.54 mm
33
Exit
Contents
Europe:
BELGIUM
FCI Belgium 48 A rue Stroobants B-1140 Brussels Tel.: +32 2 247 99 00 Fax: +32 2 247 99 99 E-mail: [email protected]
GREAT BRITAIN
Framatome Connectors UK Connector House Eyncourt Road Woodside Estate DUNSTABLE Beds. LU5 4TS Tel.: +44 1 582 814 800 Fax: +44 1 582 814 814 E-mail: [email protected]
NETHERLANDS
FCI Nederland Essebaan 7 2908 LJ CAPELLE A/D IJSSEL Tel.: +31 10 264 3333 Fax: +31 10 264 3399 E-mail: [email protected]
SWEDEN
FCI Connectors Sweden Sjviksbacken 12 Box 47084 100 74 Stockholm Tel.: +46 8 685 5300 Fax: +46 8 685 5355 E-mail: [email protected]
FRANCE
FCI France 145 rue Yves le Coz 78035 VERSAILLES Cedex Tel.: +33 1 39 49 21 83 Fax: +33 1 39 49 20 00 E-mail: [email protected]
ITALY
Framatome Connectors Italia Strada del Francese 137 10156 TORINO Tel.: +39 011 451 9611 Fax: +39 011 470 2266 E-mail: [email protected]
SPAIN
FCI Connectors Espaa Poligono Industrial 08781 St. Esteve Sesrovires Tel.: +34 93 771 4012 Fax: +34 93 771 3197 E-mail: [email protected]
SWITZERLAND
FCI Schweiz Sihlbruggstrasse 144 6340 BAAR Tel.: +41 41 760 1434 Fax: +41 41 761 0647
Copyright FramatomeConnectors International, S.A. All rights reserved.
GERMANY
FCI Deutschland GmbH Am Kronberger Hang 5 65824 Schwalbach Germany Tel: +49 6196 9520 0 Fax: +49 6196 9520 111 E-mail: [email protected]
Americas:
FCI USA 825 Old Trail Road Etters, Pennsylvania 17319 Tel. : 1-800 237 2374 Fax : 1-717 938 7604 E-mail : [email protected]
www.fciconnect.com
NL FFC FPC 09 01 E
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
U.S.A. Tel.: (800) 237-2374; 717-938-7200 Canada Tel.: 905-826-9810 Europe Tel.: 33-1-39-49-21-83 Asia/Pacific Tel.: 65-549-6666
950567-004 08/01
http://www.fciconnect.com
September 2001
Introduction
FCI, Framatome Connectors International, is the worlds second largest manufacturer of connectors and the only European company amongst the top ten. FCI is operating more than 60 production plants in 29 countries, and has its headquarters in Paris, France. FCI employs more than 21,000 people in Europe, Asia and the Americas. FCIs global product range is wider than most of its competitors. Combining the strengths of its operating subsidiaries, FCI occupies a leadership position in the communications, data, consumer, industrial & instrumentation, military and aerospace, energy and automotive markets. Its expertise in interconnection technologies, its industrial competence, a continuous investment in R&D together with a coordinated global sales and distribution network makes FCI the first choice as a partner for every type of industry.
Selection
Innovation
Circuitry and cable
Flexible Printed Circuit (FPC) Flexible Flat Cable (FFC) Conductive Ink Circuitry (CIC)
Reliability
Cable lock
Economy
Cable Lock alignment system
Ensures proper alignment during mating and prevents unintentional cable release
FPC
FFC
CIC
Contact pressure
Tin or solder plating Contact Conductor Gas tight high pressure contact area
Upside contact
Connector
Contacts
Downside contact
Cable
Contents
0.30 mm spacing
page
62789 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
0.50 mm spacing
62674 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 62684 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 SFV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1.00 mm spacing
SFW Series HFW Series SLW Series HLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
2.54 mm spacing
DUFLEX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 CLINCHER Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
GENERAL
Product chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Circuitry lay-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-31 Performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Series at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Exit
Contents
More
Features s Available in 27, 33, 39, 45, 51, 57 positions s Right angle s Excellent cable retention with small size slider
Benefits s s s s Low profile of 2.00 mm Flip-Top cover rotates back 100 degrees for easy cable positioning. Staggered PCB layout enables space savings and easy soldering. The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation.
Technical Data
Material
Housing : Slider : Contact : Thermoplastic Resin, White Thermoplastic Resin, Black Phosphor Bronze, Tin alloy plated
Dimensions B = 0.30 x total number of positions - 0.30 C = 0.30 x total number of positions - 0.90
Exit
Contents
Back
Next
Ordering Data
Series
Dimensions
Dimensions A = 0.30 x total number of positions + 2.10 B = 0.30 x total number of positions - 0.30 C = 0.30 x total number of positions - 0.90
Exit
Contents
More
Features s Available in 12, 20, 24, 25, 30 positions s Vertical s Excellent cable retention with small size slider s Cable lock option
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance. s The cable lock option provides cable strain relief as well as full retention of cable.
Technical Data
Material
Housing : Slider : Contact : Resin, glass reinforced, UL94V-0, Black Resin, glass reinforced, UL94V-0, Brown (with cable-lock : Black) Phosphor Bronze, Tin alloy plated
Exit
Contents
Back
Next
Ordering Data
Series
62674 - Positions 11 2 1
Cable lock 2 = without cable lock 3 = with cable lock Tape and reel : 1000 pcs.
Number of contacts 12, 20, 24, 25, 30 (for other number of positions, please contact FCI)
Dimensions
Packaging
Dimensions A = 0.50 x total number of positions + 4.50 0.20 B = 0.50 x total number of positions + 3.90 0.20 C = 0.50 x total number of positions - 0.50 0.10 D (with cable lock) = 0.50 x total number of positions - 0.40 0.10 D (without cable lock) = 0.50 x total number of positions + 0.700.10
Exit
Contents
More
Features s Available in 32, 34, 40, 45, 50 positions s Right angle s Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance.
Technical Data
Material
Housing : Slider : Contact : Glass filled thermoplastic, UL94V-0, Beige Glass filled thermoplastic, UL94V-0, Black Phosphor Bronze, Tin alloy plated
10
Exit
Contents
Back
Next
Ordering Data
Series
62684 - Positions 2 10 0
Packaging Tape and reel : 2000 pcs.
Number of contacts 32, 34, 40, 45, 50 (for other number of positions, please contact FCI) Terminal type 1 = downside contact 2 = upside contact
Dimensions
Dimensions A = 0.50 x total number of positions B = 0.50 x total number of positions C = 0.50 x total number of positions D = 0.50 x total number of positions
upside contact
downside contact
11
Exit
Contents
More
Features s s s s s Available in 4 to 35 positions Right angle Cable lock option Top and bottom contacts Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s The cable lock option provides cable strain relief as well as full retention of cable. s Fork shaped contacts mean stable and low contact resistance. s Product variations cover a broad range of applications. Technical Data
Material
Housing : Black Slider : Contact : Polyamide Resin, glass reinforced, UL94V-0, PPS Resin, glass reinforced, UL94V-0, Brown (with cable-lock : Black) Phosphor Bronze, Tin alloy plated
12
Exit
Contents
Back
Next
Ordering Data
Series
SFV
4 to 35
20 R - 1 ST E1
Packaging E1 = tape-and-reel :3000 pcs. E3 = tape-and-reel :200 pcs.
Number of contacts
Terminal type R = side entry PCB mounting ST = SMT type Cable type 1 2 3 4 = = = = FPC/FFC downside contact FPC/FFC upside contact FPC (with cable-lock) downside contact FPC (with cable-lock) upside contact
upside contact
_ 0.20 0,5 x total no. of pos +5.5 +
_ 0.20 0,5 x total no. of pos +3.9 + _ 0.20 0,5 x total no. of pos +5.5 + _ 0.10 0,5 x total no. of pos +0.7 + 0,5 x total no. of pos -0.5
_ 0.20 0,5 x total no. of pos +3.9 + _ 0.20 0,5 x total no. of pos +5.5 + _ 0.10 0,5 x total no. of pos +0.7 + 0,5 x total no. of pos -0.5
13
Exit
Contents
SFW series - ZIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions (right angle) and 4 to 32 positions (straight) s Top and Bbottom contacts s Cable lock option s Optional mounting devices ( straight) s Excellent cable retention with small size slider
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s The cable lock option provides cable strain relief as well as full retention of cable. s Fork shaped contacts mean stable and low contact resistance. s Product variations cover a broad range of application. s Optional mounting devices provide PCB hold-down and strain relief for SMT tails, highly desirable for lower positions. Technical Data
Material
Housing : For Right angle version: PPS, glass reinforced, UL94V-0 For FPC / FCC : housing color: Brown (with cable-lock: Black) slider color : Black (with cable-lock: Brown) For CIC : housing color: Brown (with cable-lock: Black) slider color : Black (with cable-lock: Brown) For Vertical version: Heat-resisting Resin, glass reinforced, UL94V-0 housing color: Brown; slider color : Black Contact : Phosphor Bronze, Tin alloy plated
14
Exit
Contents
SFW series - ZIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
SFW 20 R - 1 ST E1
4 to 30
Number of contacts
Packaging Right angle E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs Straight E1 = tape-and-reel 1000 pcs
PCB mounting ST = SMT type STM = SMT with mounting device (top entry only) 5 6 7 8 = = = = CIC CIC CIC CIC downside contact upside contact (with cable-lock) downside contact (with cable-lock) upside contact
Cable type
1 = FPC/FFC downside contact 2 = FPC/FFC upside contact 3 = FPC (with cable-lock) downside contact 4 = FPC (with cable-lock) upside contact (cable types 1, 3, 4, 5, 7, 8 for side entry only)
Straight
_ 0.20 1 x total no. of pos +6.4 + _ 0.20 1 x total no. of pos -1.0 +
15
Exit
Contents
HFW series - LIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions (right angle) and 4 to 33 positions ( straight) s Top and bottom contacts s Optional mounting devices ( straight)
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Low Insertion Force (LIF) contacts positioning provides a reliable and easy mating operation. s Fork shaped contacts mean stable and low contact resistance. s Optional mounting devices provide PCB hold-down and strain relief for SMT tails, highly desirable for lower positions. Technical Data
Material
Housing : Polyamide 6T, glass reinforced, UL94V-0, Black Contact : Phosphor Bronze, Tin alloy plated
16
Exit
Contents
HFW series - LIF / SMT 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
HFW 20 R - 1 ST E1
Packaging Right angle Straight E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs E1 = tape-and-reel 1000 pcs
No of contacts 4 to 33 (Straight) 4 to 30 (Right angle) Terminal type R = Right angle S = Straight Cable type 2 6 1 2 = = = =
FPC/FFC (Straight) CIC (Straight) FPC/FFC downside contact (Right angle) FPC/FFC upside contact (Right angle)
Straight
_ 0.20 1 x total no. of pos +3.0 + _ 0.20 1 x total no. of pos -1,0 +
_ 0.20 1 x total no. of pos +1.14+ _ 0.20 1 x total no. of pos -1,0 +
_ 0.20 1 x total no. of pos +1.14+ _ 0.20 1 x total no. of pos -1,0 +
17
Exit
Contents
SLW series - ZIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 30 positions s Right angle or vertical type s Excellent cable retention with small size slider s Kinked solder tails available
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Zero Insertion Force connection allows an increased number of mating cycles with minimal wear. s The ZIF pre-holding process provides a stable and reliable mating operation. s The slider ensures maximum cable retention with a minimum size. s Fork shaped contacts mean stable and low contact resistance. s Kinked solder tails provide added PCB retention. s Product variations cover a broad range of applications. Technical Data
Material
Housing : Nylon, glass reinforced, UL94V-0, Black Slider : Nylon, glass reinforced, UL94V-0, Black (For CIC : Milky-White) Contact : Phosphor Bronze, Tin alloy plated
18
Exit
Contents
SLW series - ZIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
SLW 25 S - 1 C7
Variation C7 = for 0.8 mm dia. through-hole
No of contacts 4 to 30 Terminal type R = Right angle S = Straight Cable type 1 = FPC/FFC 5 = CIC
Tray packaging
_ 0.30 1 x total no. of pos +1.2 + _ 0.30 1 x total no. of pos +6.2 + _ 0.30 1 x total no. of pos +1.2 + _ 0.30 1 x total no. of pos +6.2 +
19
Exit
Contents
HLW series - LIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
More
Features s Available in 4 to 32 positions s Right angle and vertical type s Kinked solder tails available
Benefits s The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating. s The Low Insertion Force (LIF) contacts positioning provides a reliable and easy mating operation. s Fork shaped contacts mean stable and low contact resistance. s Kinked solder tails provide added PCB retention.
Technical Data
Material
Housing : Contact : PBT, glass reinforced, UL94V-0, Black Phosphor Bronze, Tin alloy plated
20
Exit
Contents
HLW series - LIF / Through hole 1.00 mm Spacing for FFC / FPC / CIC
Back
Next
Ordering Data
Series
HLW 10 R - 2 C 7
Variation A7 = non-kinked terminal C7 = kinked terminal Tray packaging
No of contacts 4 to 32 Terminal type R = Right angle S = Straight Cable type 2 = FPC/FFC 6 = CIC
Dimensions
Right angle
_ 0.30 1 x total no. of pos +2.6 +
_ 0.10 1 x total no. of pos +1.12 +
_ 0.30 1 x total no. of pos -1.0 +
Straight
_ 0.30 1 x total no. of pos +2.6 +
_ 0.10 1 x total no. of pos +1.12 +
_ 0.30 1 x total no. of pos -1.0 +
kinked terminal
non-kinked terminal
kinked terminal
non-kinked terminal
21
Exit
Contents
More
Features s s s s s s s s s s Available in 2 to 36 positions per row Single or double row Gold or tin plated option Gas tight Highly reliable Insulation Displacement Contact (IDC) termination technique Low-cost connection system Versatility Long-life contacts Mates with 0.62 mm square or round pins as short as 5 mm Dedicated application equipment
Benefits s Ideal for large-volume users. s Mass-termination reduces overall applied costs and time. s Contacts fitting all housing styles ensures versatility and minimizes stock values.
Technical Data
Material
Housing : Contact : Thermoplastic Polyester, glass reinforced, UL94V-0, Blue Phosphor Bronze, Gold-duplex or Tin alloy plated
Cable specification Specification: Thickness: Insulation material: Conductor Thickness: Conductor width: Conductor pitch: Thickness for non standard cable: Mating pin: IPC Standard FC-220C. Cables type A or B 0.305 0.025 mm(0.0120.0001 inch) incl. insulation Mylar, Kapton or Nomex (polyester/polyamide) 0.076 0.013 mm (0.0030.0005 inch), 305 gr/m2 0.127 0.013 mm (0.0050.0005 inch), 610 gr/m2 1.57 0.07 mm (0.0620.003 inch) 2.54 0.05 mm (0.1000.002 inch) 0.11 - 0.35 mm (0.004 - 0.013 inch) 0.64 mm square (0.025 inch), min. 5.00 mm(0.196 inch) length
Cable specification and application data sheet TA 338 and TA 333 on request
22
Exit
Contents
Back
Next
Ordering Data
Housing
5 digit partnumber
- 0 02
Number of contacts per row = 02 to 36
Contact
Plating
76785
- 3 01
Packaging
01 = 15000 11 = 3000
contact area, tin-lead cable area, contact area, tin-lead cable area,
0.30N min./0.60N max. insertion force 0.30N min./0.60N max. insertion force
Dimensions Contact
Housing
Single row
Double row
Dimensions in mm
23
Exit
Contents
More
Features s Available in 2 to 32 positions s Gas-Tight, High pressure (GTH) s Gold and tin plated option s Pre-assembled s Snap-shut s Long-life contacts s Mates with 0.62 mm square or round pins s Dedicated application equipment
Benefits s Pre-assembled connectors reduce overall applied costs and ensure full contact protection. s Snap-shut allows a single connection operation and therefore increases assembly speed.
Technical Data
Material
Housing : Contact : Polypropylene, glass reinforced, UL94V-0, Blue brass, Gold or Tin alloy plated
Cable specification Specification: Thickness: Insulation material: Conductor Thickness: Conductor width: Conductor pitch: Thickness for non standard cable: Mating pin: IPC Standard FC-220C. Cables type A or B 0.305 0.025 mm(0.0120.0001 inch) incl. insulation Mylar, Kapton or Nomex (polyester/polyamide) 0.076 0.013 mm (0.0030.0005 inch), 305 gr/m2 0.127 0.013 mm (0.0050.0005 inch), 610 gr/m2 1.57 0.07 mm (0.0620.003 inch) 2.54 0.05 mm (0.1000.002 inch) 0.11 - 0.35 mm (0.004 - 0.013 inch) 0.64 mm square (0.025 inch), min. 5.00 mm(0.196 inch) length
Cable specification and application data sheet TA 264, TA 371 and TA 372 on request
24
Exit
Contents
Back
Next
Ordering Data
Series
5 digit partnumber
- 0 02
Number of positions see table
0 = standard version 1 = for Thin film circuits ( 0.15 mm max. thickness) Female Receptacle only
Gold plated Tin plated code positions code positions 63 = 2 pos. 02 = 2 pos. 62 = 3 pos. 03 = 3 pos. 33 = 4 pos. 04 = 4 pos. 34 = 5 pos. 05 = 5 pos. 35 = 6 pos. 06 = 6 pos. 36 = 7 pos. 07 = 7 pos. 37 = 8 pos. 08 = 8 pos. 38 = 9 pos. 09 = 9 pos. 39 = 10 pos. 10 = 10 pos. 40 = 11 pos. 11 = 11 pos. 41 = 12 pos. 12 = 12 pos. 42 = 13 pos. 13 = 13 pos. 43 = 14 pos. 14 = 14 pos. 44 = 15 pos. 15 = 15 pos. 45 = 16 pos. 16 = 16 pos. 46 = 17 pos. 17 = 17 pos. 47 = 18 pos. 18 = 18 pos. 48 = 19 pos. 19 = 19 pos. 49 = 20 pos. 20 = 20 pos. 50 = 21 pos. 21 = 21 pos. 51 = 22 pos. 22 = 22 pos. 52 = 23 pos. 23 = 23 pos. 53 = 24 pos. 24 = 24 pos. 54 = 25 pos. 25 = 25 pos. 55 = 26 pos. 26 = 26 pos. 56 = 27 pos. 27 = 27 pos. 57 = 28 pos. 28 = 28 pos. 58 = 29 pos. 29 = 29 pos. 59 = 30 pos. 30 = 30 pos. 60 = 31 pos. 31 = 31 pos. 61 = 32 pos. 32 = 32 pos. 66 = 34 pos. 64 = 34 pos.
Gold plated Tin plated code positions code positions 34 = 2 pos. 02 = 2 pos. 35 = 3 pos. 03 = 3 pos. 36 = 4 pos. 04 = 4 pos. 37 = 5 pos. 05 = 5 pos. 38 = 6 pos. 06 = 6 pos. 39 = 7 pos. 07 = 7 pos. 40 = 8 pos. 08 = 8 pos. 41 = 9 pos. 09 = 9 pos. 42 = 10 pos. 10 = 10 pos. 43 = 11 pos. 11 = 11 pos. 44 = 12 pos. 12 = 12 pos. 45 = 13 pos. 13 = 13 pos. 46 = 14 pos. 14 = 14 pos. 47 = 15 pos. 15 = 15 pos. 48 = 16 pos. 16 = 16 pos. 49 = 17 pos. 17 = 17 pos. 50 = 18 pos. 18 = 18 pos. 51 = 19 pos. 19 = 19 pos. 52 = 20 pos. 20 = 20 pos. 53 = 21 pos. 21 = 21 pos. 54 = 22 pos. 22 = 22 pos. 55 = 23 pos. 23 = 23 pos. 56 = 24 pos. 24 = 24 pos. 57 = 25 pos. 25 = 25 pos. 58 = 26 pos. 26 = 26 pos. 59 = 27 pos. 27 = 27 pos. 60 = 28 pos. 28 = 28 pos. 61 = 29 pos. 29 = 29 pos. 62 = 30 pos. 30 = 30 pos. 63 = 31 pos. 31 = 31 pos. 64 = 32 pos. 32 = 32 pos.
Dimensions in mm
25
Exit
Contents
General
Next
Circuitry lay-outs
Bill of Material
1 2 3 4
Polyamide or Polyester or Equivalent Copper Foil (Solder Plated 1 m min.) Polyamide or Polyester or Equivalent Polyamide or Polyester or Equivalent
1 2 3
Flame Resistant Polyester or Equivalent Copper Foil (Tin or Solder Plated 1 m min.) Flame Resistant Polyester or Equivalent
1 2 3 4
Polyester or Equivalent Carbon Paste over Silver Paste Polyamide or Polyester or Equivalent Polyamide or Polyester or Equivalent
26
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC for 62789 Series
no.of pos.
Dimensions in mm
27
Exit
Contents
General
Back
Next
Circuitry lay-outs
FFC for 62684 Series FPC for 62684 Series
Dimensions in mm
28
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC cable lock for SFV Series FFC for SFW Series
Dimensions in mm
29
Exit
Contents
General
Back
Next
Circuitry lay-outs
FPC cable lock for SFW Series FFC for HFW straight Series
Dimensions in mm
30
Exit
Contents
General
Back
Next
Circuitry lay-outs
FFC for SLW Series FPC for SLW Series
Dimensions in mm
31
Exit
Contents
General
Back
Next
Performance characteristics
Spacing Circuitry Series Electrical Current Rating Rated Voltage (AC/DC) Contact Resistance (initial) Insulation Resistance Dielectic withstanding Voltage Mechanical Durability Cycle Vibration Environmental Salt Spray Damp Heat (steady state) Change of Temperature Operating temperature Range
2.54 mm
DUFLEX CLINCHER
Contact resistance : 50m max. 20 20 per JIS C 0040 20 30 20 30 30 No discontinuity greater than 1 second
32
Exit
Contents
General
Back
Next
Series at a glance
Series
Pitch
Cable Type
ZIF / LIF
Soldering
Number of Positions
62789 62674 62684 SFV SFR HFR SFW HFW SLW HLW SFD SLD SLP SLEM HLEM Clincher Duflex
0.30 mm 0.50 mm 0.50 mm 0.50 mm 0.80 mm 0.80 mm 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 mm mm mm mm mm mm mm mm mm
FPC FFC/FPC FFC/FPC FFC/FPC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC FFC/FPC/CIC FFC/FPC/CIC FFC/FPC/CIC
ZIF ZIF ZIF ZIF ZIF LIF ZIF LIF ZIF LIF ZIF ZIF ZIF ZIF LIF -
SMT SMT SMT SMT SMT SMT SMT SMT DIP DIP SMT DIP DIP DIP DIP -
4,6,21,26 4 to 40 4 to 20 4 to 30 3 to 40 2 to 32 2 to 72
2.54 mm 2.54 mm
33
Exit
Contents
Europe:
BELGIUM
FCI Belgium 48 A rue Stroobants B-1140 Brussels Tel.: +32 2 247 99 00 Fax: +32 2 247 99 99 E-mail: [email protected]
GREAT BRITAIN
Framatome Connectors UK Connector House Eyncourt Road Woodside Estate DUNSTABLE Beds. LU5 4TS Tel.: +44 1 582 814 800 Fax: +44 1 582 814 814 E-mail: [email protected]
NETHERLANDS
FCI Nederland Essebaan 7 2908 LJ CAPELLE A/D IJSSEL Tel.: +31 10 264 3333 Fax: +31 10 264 3399 E-mail: [email protected]
SWEDEN
FCI Connectors Sweden Sjviksbacken 12 Box 47084 100 74 Stockholm Tel.: +46 8 685 5300 Fax: +46 8 685 5355 E-mail: [email protected]
FRANCE
FCI France 145 rue Yves le Coz 78035 VERSAILLES Cedex Tel.: +33 1 39 49 21 83 Fax: +33 1 39 49 20 00 E-mail: [email protected]
ITALY
Framatome Connectors Italia Strada del Francese 137 10156 TORINO Tel.: +39 011 451 9611 Fax: +39 011 470 2266 E-mail: [email protected]
SPAIN
FCI Connectors Espaa Poligono Industrial 08781 St. Esteve Sesrovires Tel.: +34 93 771 4012 Fax: +34 93 771 3197 E-mail: [email protected]
SWITZERLAND
FCI Schweiz Sihlbruggstrasse 144 6340 BAAR Tel.: +41 41 760 1434 Fax: +41 41 761 0647
Copyright FramatomeConnectors International, S.A. All rights reserved.
GERMANY
FCI Deutschland GmbH Am Kronberger Hang 5 65824 Schwalbach Germany Tel: +49 6196 9520 0 Fax: +49 6196 9520 111 E-mail: [email protected]
Americas:
FCI USA 825 Old Trail Road Etters, Pennsylvania 17319 Tel. : 1-800 237 2374 Fax : 1-717 938 7604 E-mail : [email protected]
www.fciconnect.com
NL FFC FPC 09 01 E
Target Applications
Test equipment: IC test equipment Datacom: Routers, hubs, core switches, modems Telecom: Switches Applications with auxiliary cards (Clock, option, etc.) cPCI designs requiring higher density of signals
http://www.fciconnect.com
Americas Tel.:
Mechanical Performance
Mating force: 0.75 N max. per contact pair Withdrawal force: 0.15 N min. per contact pair Normal force: 0.75 N min. (EOL)
Electrical Performance
Operating temperature: -55C to +125C Current rating: 1.5 A at 20C, 1.0 A at 70C Contact resistance: 20m max. Insulation resistance: 104 M min.
Specifications
Products fully in accordance with IEC 61076-4-101, but not yet included in the specification as of this date
Part Numbers
Description FR Receptacle with location pegs, Unshielded FR Receptacle with location pegs, Shielded and 2pc Lower Shield Compatible FR Receptacle with location pegs,Top shielded and 1pc Lower Shield Compatible FR 1 piece lower shield FR Receptacle without location pegs, Unshielded FR Receptacle without location pegs, Shielded and 2pc Lower Shield Compatible FR Receptacle without location pegs,Top shielded and 1pc Lower Shield Compatible FR 1 piece lower shield FR Header, Unshielded stub contacts FR Header, Shielded stub contacts FR Header, Unshielded RPU contacts FR Header, Shielded RPU contacts FR Shroud for RPU Tails - See detail below for FR Shroud standoff variations * Availability Q3 2002 Part Number HM2H82P1 HM2H82P109 HM2H82P115 HM2H82P117 HM2H82P119 HM2H82P122 HM2H82P130 L1 3.0 3.9 4.5 4.7 4.9 5.2 6.0 L2 13.45 14.35 14.95 15.15 15.35 15.65 16.45
http://www.fciconnect.com
950568-005 7/02
Americas Tel.:
Available Available Available Available Available Not Available Yet Not Available Yet
Target Markets
cPCI users requiring Reverse Gender Telecom Datacom Test equipment & Industrial Instrumentation Medical
Description
FCI introduces 5+1 row Male Right Angle series in the standard signal modules A, B & C and also B19 & B22 sizes for CompactPCI compatibility. The top shield row is optional. Pin layout configurations are available to support cPCI modules for standard form factors. This system is designed for applications requiring co-planar board-to-board connection within the normal Hard Metric Millipacs environment. When used in conjunction with Right Angle Receptacles, this system is suitable for Extender or Test Card designs. In addition to co-planar design, these Right Angle Headers can also be used in applications that require an indestructible BackPlane (i.e. where any risk of BackPlane Pin damage is unacceptable). Vertical receptacles can be used in place of Vertical Headers on the the BackPlane and Right Angle Headers are used on the Daughter Cards (requires a slight PCB dimensional adjustment). The standard Millipacs 2 mm Hard Metric Interconnection System consists of 5+2 and 8+2 row connector families compliant with the IEC specifications.
http://www.fciconnect.com
Target Applications
Extender Cards Test Cards Reverse Gender Backplanes
Americas Tel.:
Mechanical Performance
Mating force: 0.75 N max. per contact pair Withdrawal force: 0.15 N min. per contact pair Normal force: 0.75 N min. (EOL)
Specifications
Products fully in accordance with IEC 61076-4-101, but not included in the specification as of this date Drop-in replacement for similar competitors products
Electrical Performance
Operating temperature: -55C to +125C Current rating: 1.5 A at 20C, 1.0 A at 70C Insulation resistance: 104 M min.
http://www.fciconnect.com
950568-010 8/02
Americas Tel.:
cPCI reverse gender modules Description cPCI stub header type A HM2P07PDG1A1N9 type B22 HM2P70PDE121N9 type B19 HM2P71PDE121N9
Target Markets
cPCI users requiring reverse gender Telecom Datacom Test equipment & industrial instrumentation Medical
Description
FCI introduces a new line of 5+2 row Vertical Receptacles that are available in the standard signal modules A, B & C and also B19 & B22 sizes for CompactPCI compatibility. The two shield rows are optional. All modules are available with Standard Tail or Rear Plug-Up Tails (for use with a Header Shroud on the Rear side of the PCB BackPlane). This system is designed for applications requiring a parallel board-to-board connection within the normal Hard Metric Millipacs environment. These vertical receptacle modules, when mated to a standard straight header are suitable for both parallel and mezzanine board-to-board applications In addition to parallel and mezzanine designs these Vertical Receptacles can also be used in applications that require an indestructible BackPlane (i.e.where any risk of BackPlane pin damage is not acceptable). Vertical Receptacles can be used in the place of Vertical Headers on the BackPlane, and Right Angle Headers are used on the Daughter Cards (requires a slight PCB dimensional adjustment). The Millipacs 2 mm Hard Metric Interconnection System consists of 5+2 and 8+2 row Connector families compliant with the IEC 1076-4-101 specifications.
http://www.fciconnect.com
Target Applications
Parallel board-to-board applications Mezzanine packaging Baby board applications Reverse gender cPCI systems when used with right angle headers
Americas Tel.:
Mechanical Performance
Mating force: 0.75 N max. per contact pair Withdrawal force: 0.15 N min. per contact pair Normal force: 0.75 N min. (EOL)
Specifications
Products fully in accordance with IEC 61076-4-101, but not included in the specification as of this date Fully intermatable with other comparable competitive hard metric products
Electrical Performance
Operating temperature: -55C to +125C Current rating: 1.5 A at 20C, 1.0 A at 70C Contact resistance: 20m max. Insulation resistance: 104 M min.
950568-004 8/02
Americas Tel.:
* Standard insert tooling, other tooling (push blades or anvils) may be required depending on your requirements and the press being used, please call technical services for more information