Thermotech 304166 FL-1 PDF

THERMOTECH
AUTOMATIC HEAT DETECTORS Four Basic Models

MODEL
302-135 302-194 302-ET-135 302-ET-194 302-AW-135 302-AW-194 302-EPM-135 302-EPM-194 AP-P
2900 N. 1000 W. OGDEN, UTAH 84414 (801) 782-2233 FAX: (801) 782-1746 www.thermotechheatdetectors.com
DESCRIPTION
135F - Interior Vertical Mounting FM & UL 194F - Interior Vertical Mounting FM & UL 135F - All Weather Vertical Mounting FM & UL 194F - All Weather Vertical Mounting FM & UL 135F - All Weather Vertical Mounting FM & UL 194F - All Weather Vertical Mounting FM & UL 135F - Explosion Proof Mounting UL 194F - Explosion Proof Mounting UL
REFER TO:
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Fig. 1 MODEL 302
For interior mounting in any atmosphere that is compatible with terminal screw type connections.
Decorative white plastic adapter plate for mounting 302, 302ET Fig. 5 and 302AW to any 3 outlet box or 4 octagon outlet box.
Hermetically sealed for moisture proof or dust proof installations. Requires no special back box. Has plastic hexagonal grip bushing with 1/2 conduit threads for attachment to threaded hub cover, or any outlet box. Must be hand tightened only. For indoor and outdoor use. Protect from direct sunlight and adverse weather conditions.
Fig. 2 MODEL 302-ET
Fig. 3 MODEL 302-AW
Hermetically sealed for moisture proof or dust proof installations. Requires no special back box. For indoor and outdoor use. Protect from direct sunlight and adverse weather conditions.
Explosion proof for installation in hazardous locations. Has hexagonal grip bushing with 1/2 conduit threads for attachment to threaded hub cover of series JL xture tting as manufactured by Killark Electric Co., or equal. Must be hand tightened only. For Interior use.
Fig. 4 MODEL 302-EPM
Fig. 5 AP-P
Decorative white plastic adapter plate for mounting 302, 302-AW and 302-ET detectors only.
THERMOTECH
AUTOMATIC HEAT DETECTORS
2900 N. 1000 W. OGDEN, UTAH 84414 (801) 782-2233 FAX: (801) 782-1746 www.thermotechheatdetectors.com
General
Each model is a normally open device designed especially for re detection and alarm systems. These rate compensation type detectors are available in either 135 F. or 194 F. ratings. All four basic models are self restoring, hermetically sealed, shock and corrosion resistant, and are tamper proof. Refer to NFPA STANDARD 72, STANDARD FOR AUTOMATIC FIRE DETECTORS for application requirements, testing and maintenance.
Principal of Operation
All models operate on the principles of a rate compensation detector. The detector consists of a high expansion aluminum tube which encases two insulation struts with opposing open constant points (see cut-away view). The high expansion sensing shell and the expansion struts have a different coefcient of expansion. A slow rate of temperature rise allows the heat to penetrate the inner expansion struts. Therefore, the tubular shell and the struts expand slowly until the total device has been heated to its rated temperature level of 135 F./194F. At this point, the silver contact points close which initiates the alarm. When subjected to a rapid rate temperature rise there is not as much time for heat to penetrate the inner strut. The rapid lengthening of the shell allows the struts to come together at a lower level which compensates for thermal lag inherent in conventional fixed temperature detectors. When the surrounding air temperatures goes below the rated temperature level, the shell contracts which forces contacts to open, thus automatically resetting the detector.
Special Considerations
Temp. Rating F. 135 194 Max Ceiling Temp. F. 115 155
Dimensions (Model 302): Total overall length 4 1/8. Base Diameter: 2.
Approvals/Listings
Signaling Listed
Detectors are not directionally effected, can be mounted horizontally or vertically. Detectors have a smooth ceiling UL rating of 50 x 50 (2500 sq. ft.) on 8 to 10 ft. ceilings. Detectors, hub covers, or outlet boxes must never be installed in direct sunlight. Refer to NFPA STANDARD 72 for spacing and other considerations. For further information refer to www.thermotechheatdetectors.com
Underwriters Laboratories Factory Mutual
Electrical Rating
Voltage 6-125 VAC 6-25 VAC 125 VDC Current 5 amps 1 amp 0.5 amp
California State Fire Marshall. Listing No. 7270-0021:001
MEA Acceptance # 193-03-E

Thermotech 304166 FL-1 PDF

Uploaded by

Copyright:

Available Formats

Thermotech 304166 FL-1 PDF

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Thermotech 304166 FL-1 PDF

Uploaded by

Copyright:

Available Formats

THERMOTECH

AUTOMATIC HEAT DETECTORS Four Basic Models

Fig. 1 MODEL 302

Fig. 2 MODEL 302-ET

Fig. 3 MODEL 302-AW

Fig. 4 MODEL 302-EPM

Dimensions (Model 302): Total overall length 4 1/8. Base Diameter: 2.

Underwriters Laboratories Factory Mutual

California State Fire Marshall. Listing No. 7270-0021:001

MEA Acceptance # 193-03-E

You might also like