Ricoh CX2

Camera User Guide
The serial number of this product is given on the bottom face of the camera.
Basic Operations
If you are using the camera for the first time, read this section. This section provides a basic overview of how to turn on the camera, take pictures and play back pictures.
Advanced Operations
Read this section when you want to learn more about the different camera functions. This section provides more detailed information about the functions used to take pictures and play back pictures, as well as information on how to customize the camera settings, print pictures, and use the camera with a computer. The rechargeable battery needs to be charged before use. The battery is not charged at the time of purchase.
Preface
This manual provides information on how to use the shooting and playback functions of this product, as well as warnings on its use. To make the best use of this products functions, read this manual thoroughly before use. Please keep this manual handy for ease of reference. Ricoh Co., Ltd.
Safety Precautions Test Shooting Copyright For the safe use of your camera, be sure to read the safety precautions thoroughly. Please be sure to do some test shooting to make sure it is recording properly before normal use. Reproduction or alteration of copyrighted documents, magazines, music and other materials, other than for personal, home or similarly limited purposes, without the consent of the copyright holder is prohibited. Ricoh Co., Ltd. assumes no liability for failure to record or play back images caused by malfunction of this product. This product is manufactured to local specifications and the warranty is valid within the country of purchase. Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for servicing the product locally or bearing the expenditure incurred thereof. Operating this product in the vicinity of other electronic equipment may adversely affect the performance of both devices. In particular, operating the camera close to a radio or television may lead to interference. If interference occurs, follow the procedures below. Move the camera as far away as possible from the TV, radio or other device. Reorient the TV or radio antenna. Plug the devices into separate electrical outlets.
Exemption from Liability Warranty
Radio Interference
2009 RICOH CO., LTD. All rights reserved. This publication may not be reproduced in whole or in part without Ricohs express written permission. Ricoh reserves the right to change the contents of this document at any time without prior notice. Every effort has been made to ensure the accuracy of the information in this document. Should you nevertheless notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover of this booklet. Microsoft, Windows, Windows Vista, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States of America and other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States of America and other countries. Adobe, the Adobe logo, and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and other countries. All other trade names mentioned in this document are the property of their respective owners.
Safety Precautions
Warning Symbols
Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below.
Danger Warning Caution
This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled. This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled. This symbol indicates matters that may lead to injury or physical damage if ignored or incorrectly handled.
Sample Warnings
The symbol alerts you to actions that must be performed.
The symbol alerts you to prohibited actions. The symbol may be combined with other symbols to indicate that a specific action is prohibited. Examples Do not touch Do not disassemble
Observe the following precautions to ensure safe use of this equipment.
Danger
Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses significant electrical hazard. Do not attempt to disassemble, alter or directly solder the battery.
Do not put the battery in a fire, attempt to heat it, use it in a high temperature environment such as next to a fire or inside a car, or abandon it. Do not put it into water or the sea or allow it to get wet. Do not attempt to pierce, hit, compress, drop, or subject the battery to any other severe impact or force. Do not use a battery that is significantly damaged or deformed.
Warning
Turn off the power immediately in the event of abnormalities such as smoke or unusual odors being emitted. Remove the battery as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power cord from the outlet to avoid fire or electrical hazards. Discontinue use of the equipment immediately if it is malfunctioning. Contact the nearest service center at your earliest convenience. Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the camera. Remove the battery and memory card as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power cord from the outlet to avoid fire or electrical hazards. Discontinue use of the equipment immediately if it is malfunctioning. Contact the nearest service center at your earliest convenience. Avoid any contact with the liquid crystal inside the picture display, should the monitor be damaged. Follow the appropriate emergency measures below. SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the affected area thoroughly with water, then wash well with soap. EYES: If it gets in your eyes, wash your eyes with clean water for at least 15 minutes and seek medical advice immediately. INGESTION: If any of the liquid crystal is ingested, rinse the mouth out thoroughly with water. Have the person drink a large amount of water and induce vomiting. Seek medical assistance immediately. Follow these precautions to prevent the battery from leaking, overheating, igniting or exploding. Do not use a battery other than those specifically recommended for the equipment. Do not carry or store together with metal objects such as ballpoint pens, necklaces, coins, hairpins, etc. Do not put the battery into a microwave or high pressure container. If leakage of battery fluid or a strange odor, color change, etc. is noticed during use or during charging, remove the battery from the camera or battery charger immediately and keep it away from fire.
Please observe the following in order to prevent fire, electrical shock or cracking of the battery while charging. Use only the indicated power supply voltage. Also avoid the use of multi-socket adapters and extension cords. Do not damage, bundle or alter power cords. Also, do not place heavy objects on, stretch or bend power cords. Do not connect or disconnect the power plug with wet hands. Always grip the plug section when disconnecting a power cord. Do not cover equipment while charging. Keep the battery and SD memory card used in this equipment out of the reach of children to prevent accidental ingestion. Consumption is harmful to human beings. If swallowed, seek medical assistance immediately. Keep the equipment out of the reach of children.
Do not touch the internal components of the equipment if they become exposed as a result of being dropped or damaged. The high-voltage circuitry in the equipment could lead to an electric shock. Remove the battery as soon as possible, being careful to avoid electric shocks or burns. Take the equipment to your nearest dealer or service center if it is damaged. Do not use the equipment in wet areas as this could result in fire or electric shock.
Do not use the equipment near flammable gases, gasoline, benzene, thinner or similar substances to avoid the risk of explosion, fire or burns. Do not use the equipment in locations where usage is restricted or prohibited as this may lead to disasters or accidents. Wipe off any dust that accumulates on the electrical plug as this may lead to fire. Use only the specified AC adapter in household electrical outlets. Other adapters pose the risk of fire, electric shock or injury. To avoid the risk of fire, electric shock or injury, do not use the battery charger or AC adapter with commercially available electronic transformers when traveling abroad.
Observe the following precautions to ensure safe use of this unit.
Caution
Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, rinse the area with water immediately. (Do not use soap.) If a battery starts to leak, remove it immediately from the equipment and wipe the battery chamber thoroughly before replacing it with a new battery. Plug the power cords securely into the electrical outlets. Loose cords pose a fire hazard. Do not allow the camera to get wet. In addition, do not operate it with wet hands. Both pose the risk of electric shock. Do not fire the flash at drivers of vehicles, as this may cause the driver to lose control and result in a traffic accident. Safety Precautions for When using optional products, carefully read the instructions provided with the Accessories product before using that product.
Using the Manuals

The following two manuals are included with your CX2.
Camera User Guide
Basic Operations
Advanced Operations
Camera User Guide (This booklet) This guide explains the usage and functions of the camera. It also explains how to install the provided software on your computer. Software User Guide (PDF file) The Software User Guide is available in the following folders on the provided CD-ROM. This guide explains how to download images from the camera to your computer.
Each language has its own Software User Guide in the respective folder.
To copy the User Guide onto your hard disk, copy the PDF file from the respective folder directly to your hard disk. Irodio Photo & Video Studio image viewing and editing software (for Windows only) is also included with the camera. For how to use Irodio Photo & Video Studio, see the displayed Help. For more information on Irodio Photo & Video Studio, contact the Customer Support Center below. North America (U.S.) Europe UK, Germany, France and Spain: Other Countries: Asia China TEL: (Toll Free) +1-800-458-4029 TEL: (Toll Free) +800-1532-4865 TEL: +44-1489-564-764 TEL: +63-2-438-0090 TEL: +86-21-5385-3786
Business hours: 9:00 AM to 5:00 PM
Contents
Safety Precautions ........................................................................ 1 Using the Manuals......................................................................... 4 Contents ........................................................................................ 5
Basic Operations
If you are using the camera for the first time, read this section.
11
Packing List ................................................................................. 12

Optional Accessories ..............................................................................14
Names of Parts............................................................................ 15 How to Use the Mode Dial........................................................... 17 Picture Display ............................................................................ 18 Getting Ready ............................................................................. 22
About the Battery ....................................................................................22 About the SD Memory Card (available in stores)....................................23 Charging the Rechargeable Battery........................................................25 Loading the Rechargeable Battery and SD Memory Card......................26 Turning the Power On/Off .......................................................................28 Setting the Language ..............................................................................30 Setting the Date and Time ......................................................................31
Basic Shooting ............................................................................ 32

Holding the Camera ................................................................................32 Shooting with Auto Shooting Mode .........................................................34 Shooting with Easy Shooting Mode ........................................................37 Using the Zoom Function ........................................................................39 Shooting Close-Ups (Macro Shooting)....................................................41 Using the Flash .......................................................................................43 Using the Self-Timer ...............................................................................45
Playing Back Images ................................................................... 46

Viewing Your Images ..............................................................................46 Thumbnail View ......................................................................................48 Enlarging Images ....................................................................................50
Deleting Files............................................................................... 52
Deleting a File .........................................................................................52 Specifying Multiple Files Separately .......................................................53 Specifying a Range of Multiple Files .......................................................54 Deleting All Files .....................................................................................55
Changing the Display with the DISP. Button ............................... 56

About the Electronic Level ......................................................................58 About the Histogram Display ..................................................................60
Advanced Operations
1 ADJ. Button Functions
61
62
Read this section when you want to learn more about the different camera functions.
Assigning Functions from the Shooting Menu ........................................62 Shifting the AE and AF Targets ..............................................................64
Using the Fn (Function) Button
66
Shifting the AF Target for Macro Shooting..............................................67 Locking the Exposure .............................................................................68 AF/Cont. AF ............................................................................................69 AF/M-trgt AF ...........................................................................................70 AF/MF .....................................................................................................71 AF/Snap ..................................................................................................72 Switching Between On and Off for Various Functions ............................73
Shooting Mode Types
74
Scene Mode (SCENE) ................................................................ 74

Using Portrait Mode ................................................................................77 Shooting in Zoom Macro Mode ...............................................................78 Shooting in Miniaturization Mode ............................................................79 Using Skew Correction Mode .................................................................81 Changing the Text Density......................................................................82
My Settings Mode (MY1/MY2) .................................................... 83 Dynamic Range Double Shot Mode (Q).................................... 84 Continuous Mode (R) ................................................................ 87
Normal Continuous Mode .......................................................................87 M-Cont Plus (9M) ....................................................................................88 M-Cont Plus (2M) ....................................................................................90 Speed Cont .............................................................................................92 Shooting Movies .....................................................................................94 Setting the Frame Rate ...........................................................................95 Dynamic Range Expansion Effect ..........................................................85 Dynamic Range Expansion Plus Normal Shooting .................................86
Movie Mode (3) ......................................................................... 94
Shooting Menu
97
About the Shooting Menu ............................................................ 97

Using the Menu .....................................................................................100
Picture Quality Mode/Image Size .............................................. 101
Focusing Modes ........................................................................ 103

Multi-Target AF .....................................................................................104 Manual Focus (MF) ...............................................................................105
Pre-AF ....................................................................................... 107 Exposure Metering Modes ........................................................ 108 Picture Quality and Color .......................................................... 109
Custom Settings....................................................................................110
Flash Exposure Compensation ................................................. 111 Bracket Shooting ....................................................................... 112

Auto Bracketing.....................................................................................112 White Balance Bracketing .....................................................................113 Color Bracketing ...................................................................................114 Focus Bracketing ..................................................................................115
Long Time Exposure ................................................................. 117 Shooting Several Pictures with the Custom Self-Timer............. 118 Shooting Pictures Automatically at Set Intervals ....................... 119 Camera Shake Correction ......................................................... 121 Limiting the Shutter Speed ........................................................ 122 Imprinting the Date on Images .................................................. 123 Exposure Compensation ........................................................... 124 White Balance ........................................................................... 126
Manual Settings ....................................................................................127
ISO Sensitivity ........................................................................... 128 Restoring the Shooting Menu Settings to their Defaults............ 130
Playback Functions
131
Playing Back Movies ................................................................. 131 Playing Back MP Files............................................................... 132

Exporting MP Files ................................................................................134
Playback Menu
138
About the Playback Menu ......................................................... 138

Using the Menu .....................................................................................139
Saving Images You Want to Quickly Display (Flag Function Setting) .......................................................... 140
Setting/Canceling One File at a Time ...................................................140 Setting/Canceling Multiple Files at One Time .......................................141
Displaying an Image Set to Flag Function Setting (Flag Function Display).......................................................... 142 Resizing Images ........................................................................ 143 Trimming Images....................................................................... 144
Correcting the Image Brightness and Contrast ......................... 147

Correcting Images Automatically ..........................................................147 Correcting Images Manually .................................................................148
Correcting the White Balance.................................................... 150 Correcting Skewed Images ....................................................... 152 Preventing the Deletion of Files ................................................ 154 Displaying Slide Shows ............................................................. 157 Copying the Contents of the Internal Memory to an SD Memory Card....................................................................................... 158 Using a Printing Service (DPOF)............................................... 159
Setting/Canceling DPOF for a File ........................................................159 Setting/Canceling DPOF for All Files ....................................................160 Setting DPOF for Multiple Files.............................................................160
Restoring Deleted Files ............................................................. 162 Viewing on a Television............................................................. 163
Setup Menu
165
About the Setup Menu............................................................... 165

Using the Menu .....................................................................................166
Formatting the SD Memory Card............................................... 168 Formatting the Internal Memory ................................................ 169 Adjusting the Picture Display Brightness................................... 170 Registering My Settings ............................................................ 171 Fixing the Focal Length of the Zoom ......................................... 173 Fn (Function) Button Settings.................................................... 174 ADJ. Button Settings ................................................................. 176 ISO Auto-High Settings ............................................................. 178 AF Auxiliary Light ...................................................................... 179 Operation Sound Settings ......................................................... 180 Adjusting/Muting the Operation Sound Volume ........................ 181 LCD Image Confirmation Time .................................................. 182 Auto Power Off .......................................................................... 183 LCD Auto Dimmer Mode ........................................................... 184 Auto Resize Zoom ..................................................................... 185 Level Confirmation .................................................................... 187 Grid Guide Display Options ....................................................... 188 Shooting Information Display Frame ......................................... 189 Minimum Shooting Distance Display ......................................... 190 Automatic Rotation of Playback Images.................................... 191 File Name Settings .................................................................... 193 Date and Time Settings ............................................................. 194
Language Settings .................................................................... 195 TV Playback Method ................................................................. 196
Direct Printing
197
About the Direct Print Function ................................................. 197 Connecting the Camera to a Printer .......................................... 198 Printing Still Images................................................................... 199
Printing One or All Still Images .............................................................199 Printing Several Still Images .................................................................202
Downloading Images to Your Computer
204
For Windows ............................................................................. 204

System Requirements for Using the Supplied CD-ROM.......................205 CD-ROM Setup .....................................................................................206 When [Installing the software] Is Clicked ..............................................206 When [Browse Users Manual (Software Version)] Is Clicked ..............210 When [Browse CD-ROM Content] Is Clicked........................................210 Uninstalling the Software ......................................................................211 Downloading Images Using DL-10 .......................................................212 Downloading Images Without Using DL-10 ..........................................213 Disconnecting the Camera from Your Computer ..................................216
For Macintosh............................................................................ 217

Downloading Images to Your Computer ...............................................217 Disconnecting the Camera from Your Computer ..................................218 Using the MP File Viewer......................................................................219
10 Appendices
221
Troubleshooting......................................................................... 221
Error Messages.....................................................................................221 Camera Troubleshooting ......................................................................222 Software and Computer Troubleshooting .............................................228
Specifications ............................................................................ 230

Number of Images That Can Be Stored................................................232
Defaults Settings/Functions Whose Defaults Are Restored When the Camera Is Turned Off...................................................... 234 Using Your Camera Abroad ...................................................... 236 Cautions on Use ........................................................................ 237 Care and Storage ...................................................................... 239 Warranty and Servicing ............................................................. 240 Index ......................................................................................... 242
10
Basic Operations
Packing List...................................... 12 Names of Parts................................. 15 How to Use the Mode Dial ............... 17 Picture Display ................................. 18 Getting Ready .................................. 22 Basic Shooting................................. 32 Playing Back Images ....................... 46 Deleting Files ................................... 52 Changing the Display with the DISP. Button ........................................... 56
Packing List
Open the package and make sure all the items are included. * The actual appearance of items included may differ. CX2
The serial number of the camera is provided on the bottom face of the camera.
USB Cable (Mini B cable)

Used to connect the camera to a computer or Direct Printcompatible printer.
AV Cable
Used to view your images on a TV
Rechargeable Battery
Handstrap Battery Charger
Warranty
12
Camera User Guide

Camera User Guide
CD-ROM (GP.204)
Contains software and Software User Guide. VM-1 software and Software User Guide available for Macintosh; see P.219 for installation instructions. Acrobat Reader is required to view the Software User Guide in Mac OS 9.
Basic Operations
Advanced Operations
(This booklet)
Caution----------------------------------------------------------------------------------------------The CD-ROM supports the following languages. Operations are not guaranteed on operating systems with languages other than those listed below. Japanese, English, French, German, Spanish, Italian, Chinese (Traditional, Simplified), Korean
Note --------------------------------------------------------------------------------------------------Attaching the handstrap to the camera Thread the small end of the strap through the strap eyelet on the camera and loop the ends as shown.
13
Optional Accessories
Soft Case (SC-90)
Used to store your camera.
Rechargeable Battery (DB-70)

Rechargeable battery for use with this camera.
Battery Charger (BJ-7) Neck Strap (ST-2)

A double-loop neck strap with embroidered RICOH logo. Used to charge the rechargeable battery (DB-70).
Cable Switch (CA-1)

A switch that connects to the cameras USB terminal to operate the shutter.
Note --------------------------------------------------------------------------------------------------Attaching the neck strap to the camera Remove the end of the neck strap from the connector and attach it as shown in the figure.
For the latest information on optional accessories, see the Ricoh website (http://www.ricohpmmc.com/).
14
Names of Parts
Camera
Front View If you are using the camera for the first time, read this section.
1 2 43
7 8
9
Item Name 1 2 3 4 5 6 7 8 9 Mode Dial Shutter Release Button POWER Button Microphone Lens Cover Zoom Lever z (Telephoto)/Z (Wide-angle) 8 (Enlarged View)/9 (Thumbnail View) Flash AF Auxiliary Light/Self-Timer Lamp Lens Refer to P.17, 34, 37, 74, 83, 84, 87, 94 P.32 P.28 P.94 P.39, 48, 50 P.43 P.45, 179 -
15
Rear View
7 2 1 2 3 4 5 6
9 10 11 12 13 14
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
(*)
16 17
Refer to P.18 P.13 P.163, 198, 212, 213, 217 P.131 P.198, 212, 213, 217 P.163 P.41 P.62 P.43 P.46 P.76, 100, 139, 166 P.66 P.52, 45 P.56, 58 P.26 P.231
Item Name Picture Display Strap Eyelet Terminal Cover Speaker USB Terminal AV Output Terminal N (Macro) ADJ./OK Button(*) F (Flash) 6 (Playback) Button MENU Button Fn (Function) Button t (Self-timer)/D (Delete) Button DISP. Button Power (DC input) Cable Cover Battery/Card Cover Tripod Screw Hole
16
Instructions in this manual to Press the ADJ./OK button !"#$ (or toward N or F) indicate that you should press the ADJ./OK button in the up, down, left or right direction. Instructions to Press the ADJ./OK button indicate that you should press directly down on the button.
How to Use the Mode Dial

Set the mode dial to the desired mode before shooting still images or movies.
Turn the mode dial to the symbol of the function you want to use.
Mode Dial Symbols and Descriptions

Symbol Function Auto Shooting Mode Description Automatically sets the optimal aperture value and shutter speed depending on the subject. You can shoot using the settings registered in [Reg. My Settings]. Allows you to shoot movies. Allows you to shoot with settings optimized for the shooting scene. This allows you to shoot with easy operations and without having to make any complicated settings. The settings of some shooting functions cannot be changed when using this mode. You can shoot with various continuous shooting functions. Allows you to shoot images that look natural even in the dark areas and bright areas of scenes with high contrast. Refer to P.34
MY1, MY2 My Settings Mode
P.83 P.94 P.74 P.37
3
SCENE
Movie Mode Scene Mode
EASY
Easy Shooting Mode
R Q
Continuous Mode Dynamic Range Double-shot Mode
P.87 P.84
17
Picture Display
Example of Picture Display when Shooting Pictures If you are using the camera for the first time, read this section.
Still Image Mode
2
+0.3 Interval
34 5 20
6 7 8 9 10
4 N 2048
21 22 23 24 25
1cmX4.8
26
1 second
11 12 13 14 15 16 17 18 19
31
F3.5 1/1000 EV +0.7 ISO 100
27
28
29
30
32 33
27
28
30
18
34
Movie Mode
35
36
00:00 /00:02 37 REC EC
640
Shutter butoon : Start
Item Name 1 2 3 4 Flash Mode Flash Exposure Compensation Muti-Target AF Focus mark Scene Modes/ Continuous Mode/ Plus Normal Shooting Shooting Mode Types Remaining Number of Still Images Recording Destination AE Lock Picture Quality
Refer to P.43 P.111 P.104 P.74 P.87 P.86 P.17 P.232 P.23 P.68 P.101 P.101 P.103 P.126 P.108 P.109 P.112, 113, 115, 114 P.60 P.123
Item Name 19 Battery Symbol 20 Time Exposure 21 Self-timer 22 Macro Shooting 23 Minimum Shooting Distance
Refer to P.21 P.117 P.45 P.41 P.190
18 Camera Shake Correction P.121
5 6 7 8 9
24 Digital Zoom P.40, 185 Magnification/Auto Resize Zoom 25 Zoom Bar 26 Interval Shooting 27 Aperture 28 Shutter Speed 29 Exposure Compensation 30 ISO Setting 31 Level Indicator 32 Camera Shake Warning Symbol 33 Overexposure Mark 34 Recording Time 36 Frame Rate P.39 P.119 P.230 P.122 P.124 P.128 P.59 P.33 P.124 P.232 P.95
10 Image Size 11 Focus Mode 12 White Balance 13 Exposure Metering 14 Image Settings 15 Bracket Shooting
35 Remaining Recording Time P.232 37 Movie Recording Indicator P.94
16 Histogram 17 Date Imprint
19
Note -------------------------------------------------------------------------------------------------- The number of remaining shots available may differ from the actual number of shots, depending on the subject. Movie recording time and the maximum number of still pictures may vary depending on the capacity of the recording destination (internal memory or SD memory card), shooting conditions, and the type and manufacturer of the SD memory card. When the number of remaining shots is 10,000 or more, 9999 is displayed.
Example of Picture Display During Playback

Still Image Mode
1 2 3 4 5 6 7 8 9 10
100-0010 10/20
Movie Mode
640
15 16
05:12
Start
2009/04/10 24:00
11 12 13 14
Item Name 1 2 3 4 5 6 7 8 9 File No. Total Number of Files Mode Types Flag Function Setting Protect DPOF Playback Data Source Picture Quality
Refer to P.140 P.154 P.159 P.47 P.101 16 10 11 12 13 14 15
Item Name Image Size Date at Shooting Aperture Shutter Speed Battery Symbol Recording Time or Lapsed Time Indicator
Refer to P.101 P.194 P.230 P.122 P.21 -
Number of Playback Files -
20
Note -------------------------------------------------------------------------------------------------- The picture display may display messages to inform you of operational instructions or the cameras status while in use. Additional information can be viewed by pressing the DISP. button (G P.57).
1 2 3 5 6
100-0273 10/20
AUTO: Medium F 5.0 1/60 ISO 100 EV +0.7 G:5,A:2 28 mm
BLUE
AUTO: Medium
4 7 9 11 13 15
N 2048
F 5.0 1/60 ISO 100 8 10 EV +0.7 G:5,A:2 28 mm 12

BLUE
14
C:+0,S:+0,D:+0
C:+0,S:+0,D:+0
2009/01/01 02:20
Item Name 1 2 3 4 5 6 7 8 Shooting Mode Plus Normal Shooting Dynamic Range Expansion Aperture Shutter Speed ISO Setting Exposure Compensation Exposure Metering
Refer to P.86 P.85 P.230 P.122 P.128 P.124 P.108 10 11 12 13 14 15 9
Item Name White Balance / White Balance Compensation Flash Mode
Refer to P.126 P.150 P.43
Focal Length of the Zoom P.39 Macro Shooting Focus Mode Auto Bracket Image Settings P.41 P.103 P.112 P.109
Battery Level Indication

A battery symbol appears at the lower right of the picture display to indicate the battery level. Recharge the battery before it is depleted.
Battery Symbol Green Description Battery is sufficiently charged. Battery partially discharged. Recharging is recommended. Battery level is low. Recharge the battery.
Caution----------------------------------------------------------------------------------------------may be displayed when the camera is powered by an AC adapter. This is normal and does not indicate a malfunction.
21
Getting Ready
Turn the power on and get ready to shoot.
Note -------------------------------------------------------------------------------------------------- Be sure the camera is off before removing the battery. For information on how to turn the camera off, see P.28.
About the Battery

This camera uses the Rechargeable Battery DB70, a dedicated lithium-ion battery supplied with the camera. It is economical because you can recharge it using the battery charger and use it over and over again. The rechargeable battery needs to be charged before use. The battery is not charged at the time of purchase.
Number of shots you can take --------------------------------------------------------------Approximate number of shots you can take on a single charge: Approx. 290 * When [LCD Auto Dim] (GP.184) is set to [On] Based on CIPA standard (Temperature: 23 degrees Celsius, picture display on, 30 seconds between shots, changing the zoom setting from telephoto to wide-angle or wide-angle to telephoto for each shot, 50% flash usage, turning the power off after each 10 shots). You can take approximately 270 shots when [LCD Auto Dim] is set to [Off]. Set the camera to synchro-monitor mode to increase the number of shots you can take. (GP.56) The number of shots is for reference only. If the camera is used for long periods of time for setting and playback, the shooting time (the number of shots) will decrease. If you intend to use the camera for a long period of time, we recommend carrying a spare battery.
Caution---------------------------------------------------------------------------------------------- The battery may become very hot immediately after operation. Turn the camera off and leave it to cool down sufficiently before removing the battery. Please remove the battery if you are not going to use the camera for a long period of time. When using a lithium-ion battery, use only the specified rechargeable lithium-ion battery (DB-70). Do not use other rechargeable lithium-ion batteries.
22
About the SD Memory Card (available in stores)

You can store images you have taken either in the cameras internal memory or on an SD memory card (available in stores). The internal memory capacity is approximately 88 MB. To record a lot of still images or movies at high resolutions, use a high-capacity SD memory card.
About Formatting--------------------------------------------------------------------------------Before using a new SD memory card, be sure to format it with this camera. If an error message such as [Card Error] is displayed when an SD memory card is loaded in the camera or the card has been used with a computer or other digital camera, you must format the card with this camera prior to use. (GP.168)
Where images are recorded------------------------------------------------------------------When no SD memory card is loaded, the camera records images to the internal memory; when an SD memory card is loaded, it records images to the SD memory card. When no SD memory card is loaded When an SD memory card is loaded
Records to the internal memory
Records to the SD memory card
Caution---------------------------------------------------------------------------------------------- If an SD memory card is loaded, the camera does not record to the internal memory, even if the card is full. Take care not to get the contacts of the card dirty.
23
Write-protecting your images ---------------------------------------------------------------Move the write-protection switch on the SD memory card to LOCK to prevent your still images from being accidentally erased or the card from being formatted. If you unlock the card (by returning the switch to its original position), it is once again possible to erase images and format the card. It is recommended to move the write-protection switch to LOCK when you have some important data recorded. Note that you cannot shoot images on a locked card because no data can be recorded to the card. Unlock the card before shooting.
Note -------------------------------------------------------------------------------------------------- For information on switching between the SD memory card and internal memory during playback, see P.47. Movie recording time and the maximum number of still pictures varies depending on the capacity of the SD memory card. (GP.232) You can copy images recorded in the internal memory to the SD memory card. (GP.158)
24
Charging the Rechargeable Battery

The rechargeable battery needs to be charged before use. The battery is not charged at the time of purchase.
1 2
Insert the battery into the battery charger, making sure that the and markings on the battery match those on the battery charger.
The battery label should face up. Caution----------------------------------------------------------------------------------------------Be careful not to reverse the and sides.
Plug the power cable into an outlet.

Use the battery charger (BJ-7) to recharge the battery. Charging starts, and the charger lamp indicates the progress, as shown below. Once charging has finished, unplug the power cable from the power outlet.
Charger Lamp Description Lit Charging started Off Charging complete Flashing The battery charger terminal may be soiled or the battery charger/battery may be faulty. (After unplugging the power cable from the power outlet and wiping the battery charger terminal with a dry cloth or cotton swab, plug it in again. If the charger lamp continues to flash, it is possible that the battery charger or battery is faulty. Unplug the power cable from the power outlet, and remove the battery.)
The estimated battery charging time is shown below. Depending on the battery level, the charging time differs.
Rechargeable battery charging time DB-70 Approx. 100 min. (25C)
25
Loading the Rechargeable Battery and SD Memory Card

After recharging the rechargeable battery, load the rechargeable battery and the SD memory card. Be sure the camera is off before removing the battery or SD memory card. If you are using the camera for the first time, read this section.
Open the battery/card cover.
Make sure the SD memory card is facing the right way and then push the card all the way in until it clicks.
The rechargeable battery may be inserted first.
26
Insert the rechargeable battery.

When the rechargeable battery is loaded in place, it is locked with the hook shown in the figure.
Logo side
Close the battery/card cover and slide it back into place.
Removing the Rechargeable Battery Open the battery/card cover. Release the hook that locks the rechargeable battery. The battery is ejected. Pull the battery out of the camera. Be careful not to drop the battery when removing it from the camera. Removing the SD Memory Card Open the battery/card cover. Push in the SD memory card and gently release to eject it. Pull the card out of the camera.
Caution----------------------------------------------------------------------------------------------Remove the battery if you are not going to use the camera for a long period of time. Store the removed battery in a dry cool place.
27
Turning the Power On/Off
1
To turn the power on:
Press the POWER button.

After the start sound, the picture display turns on.
Using the Camera in Playback Mode Pressing and holding the 6 (Playback) button turns on the camera in playback mode, allowing you to start playback at once. When the camera has been turned on with the 6 button, pressing the 6 button again switches playback mode to shooting mode. Caution----------------------------------------------------------------------------------------------After the camera is turned on, it may take longer for the camera to become ready for shooting when using the flash than when not using the flash.
To turn the power off:
Press the POWER button.

The number of files recorded on that day is displayed, and then the camera turns off. If the date is not set, the number of files recorded is displayed as [0]. If the date is changed, only the number of files recorded after the date change is displayed.
28
About Auto Power Off-------------------------------------------------------------------------- If the camera goes unused for a set period of time, it automatically turns itself off to save power. (Auto Power Off) The auto power off setting can be changed. (GP.183)
About LCD Auto Dimmer Mode -------------------------------------------------------------When [LCD Auto Dim] is set to [On] on the setup menu (GP.184), the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness.
29
Setting the Language

When the power is turned on for the first time, the language setting screen appears (for the picture display language). After setting the language, go on to the date/time setting (for printing the date and time on your photos). You can shoot without these settings. However, be sure to set the language, and the date/time later. Use the setup menu for these settings.
1 2 3
Turn the power on for the first time after purchase.

The language selection screen appears. To skip language setting, press the DISP. button. When the DISP. button is pressed, the language setting is canceled and the date/time setting screen appears.
Press ADJ./OK button !"#$ to select a language. Press the ADJ./OK button.
The display language is set, and the date/time setting screen appears. Note --------------------------------------------------------------------------------------------------For how to set the display language and date/time on the setup menu, see Language Settings (GP.195) and Date and Time Settings (GP.194) in this guide.
30
Setting the Date and Time

When the power is turned on for the first time, the date/time setting screen appears.
Press the ADJ./OK button !"#$ to set the year, month, date, time and format.
Change the setting with !" and move the item with #$. You can cancel the setting by pressing the DISP. button.
Cancel
Setting at shipping
Cancel
2 3
Check the display and then press the ADJ./OK button.

The confirmation screen appears.
Press the ADJ./OK button.

The date and time are set. Note -------------------------------------------------------------------------------------------------- If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again. To retain the date and time settings, load a battery with adequate remaining power for more than two hours. The set date and time can be changed later. (GP.194) The date and time can be inserted into images. (GP.123)
31
Basic Shooting
Now you are ready.
Holding the Camera

If you are using the camera for the first time, read this section. Hold the camera as shown below for best results.
1 2
Hold the camera with both hands and lightly press both elbows against your body.
Put your finger on the shutter release button.
Caution---------------------------------------------------------------------------------------------- When you are shooting, be careful not to obstruct the lens or flash with your fingers, hair, or the strap. Do not hold the lens unit. Zoom and focusing will not be performed properly.
32
Preventing Camera Shake --------------------------------------------------------------------If you move the camera when pressing the shutter release button, the still image might not come out clearly due to camera shake. Camera shake tends to occur in the following cases: When shooting in a dark place without using the flash When using the zoom function When shooting using time exposure (GP.117) When the J symbol appears on the picture display, this indicates that camera shake may occur. To prevent camera shake, try any of the following. Using the camera shake correction function (GP.121) Setting the flash to [Auto] or [Flash On] (GP.43) Raising the ISO setting (GP.128) Using the self-timer (GP.45)
33
Shooting with Auto Shooting Mode

Turn the mode dial to 5 to shoot with auto shooting mode. The shutter release button works in two steps. When you press the shutter release button halfway (Half-press), the auto-focus function is triggered to determine the focal distance. Next, press it all the way down (Full-press) to shoot. When your subject is not in the center of your composition, compose your photo after focusing. (Focus Lock)
1 2
Press the POWER button to turn the camera on, and turn the mode dial to 5.
Put the subject of your photo in the center of the screen and press the shutter release button halfway.
The camera focuses on the subject and the exposure and white balance are fixed. If automatic focusing fails, a red frame is displayed in the center of the picture display. The focal distance is measured at a maximum of nine points. Green frames appear to indicate the positions that are in focus.
Frame
34
To take a picture with the subject in the foreground in focus against a background, half-press the shutter release button to focus on the subject, and then compose your shot.
Subject to be focused on
Shooting range
Gently press the shutter release button all the way.

The still image you have taken appears momentarily on the picture display and is recorded to the internal memory or SD memory card. About Focusing ----------------------------------------------------------------------------------The color of the frame in the center of the picture display indicates whether the subject is in or out of focus. Focus Status Before focusing Subject in focus Subject not in focus Frame Color White Green Red (Flashing)
It may be impossible to bring the following subjects into focus, or they may not be in focus even when the frame color is green. Objects that lack contrast, such as the sky, a wall that is only one color, or the hood of a car. Flat two-dimensional objects with only horizontal lines and no significant protrusions. Quickly moving objects. Things in poorly lit places. Areas with strong backlighting, or reflections. Things that flicker, such as fluorescent lights. Point light sources, such as light bulbs, spotlights, or LEDs. When you want to shoot subjects like this, first focus on an object the same distance as your subject and then shoot.
35
Note -------------------------------------------------------------------------------------------------- Press the shutter release button gently to prevent camera shake. The J symbol indicates that camera shake may occur. Hold the camera still and focus the camera again. You can also turn on the camera shake correction function to minimize blurring. (GP.121) The auxiliary flash fires to increase the AE accuracy.
36
Shooting with Easy Shooting Mode

Turning the mode dial to EASY limits the shooting functions that can be changed and allows you to shoot with easy operations and without having to make any complicated settings. With this mode, even first-time users can comfortably use the camera without worrying about the settings. This is useful when sharing the camera with other family members or asking someone to take your picture while on vacation. If the camera detects a face anywhere in the frame, it will set focus, exposure, and white balance for the detected face.
1 2
Turn the mode dial to EASY. Press the shutter release button to shoot the picture.
37
Note -------------------------------------------------------------------------------------------------- The shooting menu can only be used to set [Picture Quality/Size] and [Date Imprint]. For the operating procedure, see P.101 and P.123. The other shooting menu items are fixed at their default settings (GP.234), except for [ISO Setting] which is fixed at [Auto] or [Auto-Hi] depending on the flash mode. When the mode dial is set to easy shooting mode, the quantity and order of the items in the setup menu are different from other shooting modes. The contents of the settings are the same as other modes. Flash, macro, and self-timer settings that are changed in another mode return to their default settings when easy shooting mode is selected. Macro mode can not be selected with the ADJ./OK button in easy shooting mode. Instead, the camera automatically enters macro mode when the subject is close to the camera and a N icon is displayed. The minimum distance to the subject and the dimensions of the area photographed at this distance are shown below. Zoom Position Focal Length(*) Minimum Shooting Distance (from the front of the lens) Approx. 8 cm Approx. 27 cm Approx. 27 cm Shooting Range
Wide-angle 28 mm 300 mm Telephoto 1440 mm
Approx. 111 mm 83 mm Approx. 45 mm 34 mm (when digital zoom is not used) Approx. 9.4 mm 7.0 mm (when 4.8 digital zoom is used)
(*)
Equivalent to that on a 35 mm camera
38
Using the Zoom Function

Turning the zoom lever toward z (Telephoto) allows you to take a close-up picture of the subject. Turning the zoom lever toward Z (Wide-angle) allows you to take a wide-angle picture. If you are using the camera for the first time, read this section.
Wide-angle Telephoto
With the camera ready to shoot, turn the zoom lever toward z or Z.
You can check the zoom status on the zoom bar of the picture display. Low speed zooming and high speed zooming are available. Turning the zoom lever just slightly toward z operates the zoom at low speed. Hold the zoom lever at z to activate to high-speed zoom.
2 3
Compose your picture and half-press the shutter release button. Full-press the shutter release button.
39
Using the Digital Zoom ------------------------------------------------------------------------While you can use the normal zoom to enlarge the subject up to 10.7, digital zooming allows you to enlarge the subject still further (up to another 4.8 for still images or 4.0 for movies). To use digital zooming, turn and hold the zoom lever toward z until the maximum magnification is reached on the zoom bar, then momentarily release the zoom lever, and then turn the zoom lever again toward z. If [Picture Quality/Size] is set to 3456 2592, you can also set [Digital Zoom Image] to [Auto Resize]. (GP.185)
Note -------------------------------------------------------------------------------------------------- You can also set the focal length of the zoom so that it stops at eight levels. (GP.173) The digital zoom cannot be used with dynamic range double-shot or multi-target AF.
40
Shooting Close-Ups (Macro Shooting)

The macro shooting function lets you take shots of subjects that are very close to the lens. This is good for shooting small subjects because you can shoot up to approximately 1 cm (0.4 in.) away from the front of the lens. If you are using the camera for the first time, read this section.
1 2 3
Press the ADJ./OK button toward N (Macro).

N is displayed momentarily at the center of the picture display and then N is displayed at the top of the screen.
To cancel macro mode, press the ADJ./OK button toward N again.
41
Note -------------------------------------------------------------------------------------------------- If macro mode is selected when the zoom position is set to the wide-angle side (28 mm focal length*), the zoom position is automatically fixed at 31 mm*. (* Equivalent to that on a 35 mm camera) The minimum shooting distance and shooting range when using the zoom are shown below. Zoom Position Focal Length(*) Minimum Shooting Distance (from the front of the lens) Approx. 1 cm Approx. 27 cm Approx. 27 cm Shooting Range
Wide-angle 31 mm 300 mm Telephoto 1440 mm
Approx. 28 mm 21 mm Approx. 45 mm 34 mm (when digital zoom is not used) Approx. 9.4 mm 7.0 mm (when 4.8 digital zoom is used)
(*)
During macro shooting, the minimum shooting distance changes depending on the zoom position. To display the minimum shooting distance on the screen, set [Minimum Distance] to [Show]. (GP.190) To take a further close-up picture during macro shooting, use [Zoom Macro] in scene mode. (GP.74) In macro mode, [Focus] (GP.103) functions according to the [Spot AF] setting even if it is set to [Multi AF], [Snap], or [A]. (Not applicable for easy shooting mode.) The availability of macro shooting for each scene mode is shown below. Scene Mode Portrait Sports Night. Port. Landscape Nightscape High Sens Discreet Mode Zoom Macro High Contrast B&W Miniaturize Skew Correct Mode Text Mode Disabled Disabled Disabled Disabled Disabled Enabled Enabled Macro shooting only Enabled Enabled Enabled Enabled Macro Shooting
42
Using the Flash

You can select the flash mode that best suits your shot. At the time of purchase, the camera is set to [Auto]. Flash Range * When ISO Setting (GP.128) is set to [Auto] or [ISO 800]
Wide-angle Telephoto Approx. 20 cm to 3.0 m (from the front of the lens) Approx. 28 cm to 4.0 m (from the front of the lens)
Flash Modes
Flash Off Auto Red-Eye Flash Flash On
(*)
The flash will not fire. The flash fires automatically when the subject is poorly lit or backlit. Reduces the red-eye phenomenon, in which peoples eyes appear red in pictures. The flash fires regardless of the lighting conditions. The flash fires with the shutter speed slowed. This is useful when taking portrait pictures in a nightscape. Camera shake may occur, so the use of a tripod is recommended.
Flash Synchro.(*)
(*)
This function is not available in easy shooting mode.
1 2
Press the ADJ./OK button toward F (flash).

The list of the flash modes symbol is displayed on the picture display.
Press the ADJ./OK button !" to select the flash mode.

The flash mode symbol is displayed at the upper left of the picture display. The flash mode symbol blinks at the upper left of the picture display when the flash is charging. Once the flash is charged, the symbol stops blinking and lights steadily and the camera is ready to shoot.
43
Note -------------------------------------------------------------------------------------------------- The flash mode setting is retained until you press the ADJ./OK button toward F (Flash) again. The flash does not fire when shooting movies, in continuous mode, in multi-target AF, in dynamic range double-shot, and in bracket shooting. You can adjust the light intensity of the flash. (GP.111) The auxiliary flash fires to increase the AE accuracy. The flash mode setting for each scene mode is shown below. Scene Mode Portrait Sports Night. Port. Flash Mode Initial setting: [Flash Off] Initial setting: [Flash Off] Only [Red-Eye Flash] or [Flash Synchro.] can be selected. Initial setting: [Flash Synchro.] Fixed at [Flash Off] Only [Flash Off], [Auto] or [Flash Synchro.] can be selected. Initial setting: [Auto] Initial setting: [Flash Off] Fixed at [Flash Off] Initial setting: [Flash Off] Initial setting: [Flash Off] Initial setting: [Flash Off] Initial setting: [Flash Off] Initial setting: [Flash Off]
Landscape Nightscape
High Sens Discreet Mode Zoom Macro High Contrast B&W Miniaturize Skew Correct Mode Text Mode
44
Using the Self-Timer

You can set the self-timer to shoot after either two or ten seconds, or you can select [Custom] to customize the self-timer setting. With [Custom], you can take a set number of pictures at a set interval. Use [Custom Self-Timer] on the shooting menu to set the shooting interval and number of pictures for [Custom]. (GP.118)
With the camera ready to shoot, press the t (Selftimer) button.

A list of self-timer mode settings appears on the picture display.
Press the ADJ./OK button !" to select a mode.

The Self-timer symbol appears on the screen. The [10] to the right of the symbol indicates the number of seconds. In this case, if you press the shutter release button, the camera shoots after 10 seconds.
Press the shutter release button.

When set to [10], the self-timer lamp lights for 8 seconds when the self-timer starts and then blinks for the final 2 seconds before the picture is taken. When set to [Custom], the self-timer lamp blinks for 2 seconds before each picture is taken, and pictures are taken at the set shooting interval. The focus position is set for the first shot. When set to [Custom], press the MENU button to cancel the selftimer during shooting. Note -------------------------------------------------------------------------------------------------- The camera remains in self-timer mode even after the image is shot. To cancel the self-timer, press the t button and change the self-timer setting to [Self-Timer Off]. When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink. You can only select [10] in easy shooting mode. When the self-timer is set, the [Interval Shooting] setting is disabled. [Custom] is not available when [Focus] is set to [Multi-trgt AF]. If [Focus] is set to [Multi-trgt AF] while [Custom] is selected, [Custom] is canceled and the self-timer is turned off.
45
Playing Back Images

Viewing Your Images
In playback mode, you can check still images you have taken. You can also delete or zoom in on the images. If you are using the camera for the first time, read this section.
Press the 6 (Playback) button.

The camera switches to playback mode and the last image taken is displayed. If the camera is off, press the 6 button for about a second to turn the camera on and start playback. Pressing the ADJ./OK button !"#$ displays the files in the following order.
10 files backward
1 file backward
1 file forward 10 files forward
46
Files displayed with the S symbol are images taken with M-Cont Plus, Speed Cont, or Multi-trgt AF. See P.132 for more information on playing back images.
To switch the camera from playback mode to shooting mode, press the 6 button again. Note --------------------------------------------------------------------------------------------------Setting your favorite image files to [Flag Function Setting] on the playback menu allows you to easily display these files. (GP.140)
Checking the image in shooting mode---------------------------------------------------In shooting mode, immediately after you take a still image, the still image is displayed on the screen for a moment so you can check it. You can change the image display time using [LCD Confirmation Time] on the setup menu. (GP.182) When [LCD Confirmation Time] is set to [Hold], the image remains displayed until the next time you half-press the shutter release button. When [LCD Confirmation Time] is set to [Hold], the displayed image can also be enlarged or deleted. (GP.50, 52)
Turning on the camera in playback mode-----------------------------------------------When the camera is off, pressing and holding the 6 (Playback) button turns the camera on. (The camera starts up in playback mode.) When the camera has been turned on with the 6 button, pressing the 6 button again switches playback mode to shooting mode.
Where images are played back from------------------------------------------------------When no SD memory card is loaded, the camera plays back from the internal memory. When an SD memory card is loaded, it plays back from the SD memory card.
47
Thumbnail View
When playing back images on the picture display, the playback screen can be divided into 20 frames or 81 frames.

The last file recorded is displayed.
Turn the zoom lever toward 9 (Thumbnail View).

The screen is divided into 20 frames and thumbnails are displayed.
Last File
Turn the zoom lever toward 9 again.

48
Switching to Single-Picture Display
1 2
Press the ADJ./OK button !"#$ to select a file. Press the ADJ./OK button or turn the zoom lever once or twice toward 8 (Enlarged View).
49
Enlarging Images
You can enlarge a still image displayed on the picture display.
Image Size 640 480 1280 960 Image sizes other than those above Enlarged View (maximum magnification) 3.4 6.7 16
1 2 3

Press the ADJ./OK button !"#$ to display the still image you want to enlarge. Turn the zoom lever toward 8 (Enlarged View).
The still image is enlarged. Pressing the ADJ./OK button in enlarged view changes the magnification as follows. If [Picture Quality/Size] is N2048(3M) or larger: In enlarged view at magnifications of less than 8, the magnification increases to 8. In enlarged view at magnifications of 8 or more, the magnification increases to 16. If [Picture Quality/Size] is N1280(1M) or smaller: The magnification increases to the maximum magnification.
50
Pressing the DISP. button at this point changes the display as follows.
Last File
DISP. button
Pressing the ADJ./OK button !"#$ at this point moves the area displayed.
Last File
Pressing the ADJ./OK button !"#$ at this point moves the area displayed.
Pressing and holding the DISP. button Pressing the ADJ./OK button #$ at this point displays the previous or next image enlarged. When an MP file or a movie is displayed, the display returns to the normal size.
Pressing and holding the DISP. button
Turn the zoom lever toward 9 (Thumbnail View) to return to the original size.
Note -------------------------------------------------------------------------------------------------- When [LCD Confirmation Time] is set to [Hold] on the setup menu (GP.182), the image displayed on the screen after being taken can be enlarged. Movies cannot be enlarged. For information on how to enlarge MP files, see P.132 - 133.
51
Deleting Files
You can delete unwanted or failed shooting files from the SD memory card or internal memory.
Note -------------------------------------------------------------------------------------------------- You can use the [Recover File] function to restore needed files that you accidentally deleted. (GP.162) When [LCD Confirmation Time] is set to [Hold] on the setup menu (GP.182), the image displayed on the screen after being taken can be deleted.
1 2
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to delete.
To delete multiple files, you can also turn the zoom lever toward 9 (Thumbnail View) to display thumbnail view, and then go to Step 3.
3 4 5
Press the D (Delete) button.
Deleting a File Press the ADJ./OK button !" to select [Delete One].
You can change the image for deletion with the button #$.
52
Specifying Multiple Files Separately
4 5 6
Press the ADJ./OK button !" to select [Delete Multi] and then press the ADJ./OK button.
If thumbnail view was displayed in Step 2 on P.52, skip Step 4.
Press the button !" to select [Sel. Indiv.] and then press the ADJ./OK button. Press the ADJ./OK button !"#$ to select the file you want to delete and press the ADJ./OK button.
Delete Last File
7 8 9
The trash symbol is displayed in Sel/Cancel Execute the upper left corner of the file. Press the MENU button to switch to the display for specifying a range of files. See Step 6 and beyond on P.54.
Repeat Step 6 to select all the files you want to delete.

If you selected a file by mistake, you can deselect it by selecting the file and pressing the ADJ./OK button.
Press the D (Delete) button. Press the ADJ./OK button #$ to select [Yes] and then press the ADJ./OK button.
53
Specifying a Range of Multiple Files
4 5 6
Press the ADJ./OK button !" to select [Delete Multi] and then press the ADJ./OK button.
Press the ADJ./OK button !" to select [Sel. Range] and then press the ADJ./OK button. Press the button !"#$ to select the starting point of the range of files you want to delete and press the ADJ./ OK button.
Delete
End Cancel If you make a mistake when selecting the starting point for the range of files, press the DISP. button to return to the screen for selecting the starting point. Press the MENU button to switch to the display for specifying files separately. See Step 6 and beyond on P.53.
Press the button !"#$ to select the ending point of the range of files you want to delete and press the ADJ./ OK button.
The trash symbol is displayed in the upper left corner of the specified files.
8 9
54
Repeat Steps 6 and 7 to specify all the ranges of files you want to delete. Press the D (Delete) button.
10 Press the ADJ./OK button #$ to select [Yes] and

then press the ADJ./OK button. Deleting All Files
4 5
Press the ADJ./OK button !" to select [Delete All] and then the ADJ./OK button. Press the button #$ to select [Yes] and then press the ADJ./OK button.
55
Changing the Display with the DISP. Button

Pressing the DISP. button allows you to change the screen display mode and toggle the information displayed on the picture display. During Shooting Mode
Normal Symbol Display Histogram Display Grid Guide Display
Press the DISP. button to change the display.
Picture Display Off (Synchro-Monitor Mode)
No Display
Grid Guide Display ------------------------------------------------------------------------------ This displays auxiliary lines on the picture display to help you compose your picture. These lines are not recorded with images. See P.188 for information on choosing a grid guide.
Synchro-Monitor Mode ------------------------------------------------------------------------This turns the picture display off except when the camera is operated. This is effective for saving power consumption. In this mode, pressing the shutter release button halfway turns the picture display on. Subsequently, pressing the shutter release button fully displays the shot image on the picture display and then turns the picture display off. (This setting is different from [LCD Auto Dim] in the setup menu.)
Note -------------------------------------------------------------------------------------------------- When [Shooting Info. Display Frame] is set to [On] in the setup menu, the shooting information display frame can be displayed for normal symbol display and histogram display. (GP.189) In easy shooting mode, the display cannot be changed using the DISP. button.
56
Histograms are not displayed in movie mode. A blinking [ REC] icon, the recording time, and the time available are displayed during recording even when indicators are hidden or the grid guide is displayed. When [Level Setting] is set to [Display] or [Display+Sound] (GP.187), the level indicator is displayed during normal symbol display and histogram. (GP.58) If any of the following operations is performed, the picture display turns on even when it is turned off. When the ADJ./OK button, MENU button, DISP. button, or 6 (Playback) button is pressed. When the zoom lever is turned. When the ADJ./OK button is pressed toward !" during manual focus. (GP.105)
During Playback Mode

Normal Symbol Display Histogram and Detailed Information Display
White Saturation Highlights Display Press the DISP. button to change the display.
No Display
White Saturation Highlights Display ------------------------------------------------------The white saturation areas of the image flash in black. White saturation is the loss of tone that indicates the color shading in an image in which very bright areas of the subject are rendered in white. An image with a loss of image tone cannot be edited later. It is recommended that you shoot another image by changing the composition or by setting the exposure level lower (-). (GP.124)
Note --------------------------------------------------------------------------------------------------The white saturation highlights display is for reference only.
57
About the Electronic Level

When [Level Setting] is turned on in the setup menu or by pressing and holding the DISP. button (GP.187), the camera uses a level indicator and level sound to let you know whether the image is level during shooting. The level indicator is displayed during normal symbol display and histogram. This is useful for keeping the image level when taking pictures of scenery or buildings. This is also very useful for taking pictures with the horizon visible. For information on how to set [Level Setting], see P.187. With [Level Setting] set to [Display]: The level indicator appears on the picture display. The level sound will not emit. With [Level Setting] set to [Display+Sound]: The level indicator appears on the picture display. When the camera is level, the level sound is continually emitted at a set interval. With [Level Setting] set to [Sound]: When the camera is level, a level sound is continually emitted at a set interval and the level indicator is not displayed.
58
Level indicator display

When level: The level indicator becomes green, indicating that the scale is in the middle. Green When tilted to the right or left: The mark on the level indicator becomes orange, indicating the opposite side of the direction in which the camera is tilted. When the camera is tilted too far to the right or left: Half of the level indicator on the opposite side of the direction in which the camera is tilted becomes red. The mark on the level indicator is not displayed. When the camera is tilted too far forward or backward, or it cannot be determined whether the camera is level: The top and bottom of the level indicator become red. The mark on the level indicator is not displayed. When the camera is held vertically: When shooting with the camera positioned vertically, the level function can be used to determine whether the image is vertically level.
Orange
Red
Red
Caution---------------------------------------------------------------------------------------------- During grid guide display, no display, or when the picture display is turned off (GP.56), the level sound is emitted, but the level indicator is not displayed. When [Level Setting] is set to [Display+Sound], only the level sound is emitted. The level function is not available if the camera is held upside down, when recording movies, and during interval shooting. The level function becomes less accurate when the camera is moving or when shooting in an environment subject to moving, such as on a amusement ride. No level sound is emitted when [Level Setting] is set to [Display+Sound] or [Sound] ] (Mute) (GP.187). and [Volume Settings] is set to [ Use this function as a reference to see if images are level when shooting images. The accuracy of the level when using the camera as a level cannot be guaranteed.
59
About the Histogram Display

When Histogram is on, a histogram appears in the lower right corner on the picture display. A histogram is a graph indicating the number of pixels on the vertical axis and the brightness on the horizontal axis (from left to right, shadows (dark areas), midtones, and highlights (bright areas)). By using the histogram, you can determine the brightness of an image without being affected by the brightness around the picture display. This also helps you correct for areas that are overly bright or dark. If the histogram has only peaks on the right side, this picture is overexposed with too many pixels only for highlight sections.
If the histogram has only peaks on the left side without anything else, this picture is underexposed with too many pixels only for shadow sections. Refer to this histogram when correcting the exposure.
Note -------------------------------------------------------------------------------------------------- The histogram displayed on the picture display is for reference only. After taking a picture, you can correct its brightness and contrast by making adjustments to the histogram. (GP.147) Depending on the shooting conditions (use of the flash, dark surrounding light, etc.), the exposure level indicated in the histogram may not correspond to the brightness of the shot image. Exposure compensation has its limitation. It does not necessarily achieve the best possible result. A histogram with peaks in the center may not necessarily provide the best result to suit your particular requirements. For example, an adjustment is required if you want to underexpose or overexpose the image. For information on how to correct the exposure compensation, see P.124.
60
Advanced Operations
Read this section when you want to learn more about the different camera functions.
1 2 ADJ. Button Functions .............. 62 Using the Fn (Function) Button ..................................................... 66 3 Shooting Mode Types................ 74 4 Shooting Menu ........................... 97 5 Playback Functions ................. 131 6 Playback Menu ......................... 138 7 Setup Menu............................... 165 8 Direct Printing .......................... 197 9 Downloading Images to Your Computer .................................. 204 10 Appendices............................... 221 1 2 3 4 5 6 7 8 9 10

Instructions in this manual to Press the ADJ./OK button !"#$ indicate that you should press the ADJ./OK button in the up, down, left or right direction. Instructions to Press the ADJ./OK button indicate that you should press directly down on the button. 1 ADJ. Button Functions The ADJ./OK button has the following functions. For the operating procedure of each function, see the corresponding reference page. 1 Assigning four functions from the shooting menu (GP.62) 2 Shifting the AE and AF targets (GP.64)
Assigning Functions from the Shooting Menu

You can assign four functions from the shooting menu to the ADJ./ OK button. The fifth function is fixed to AE/AF target shift (GP.64) and cannot be changed. By using the ADJ./OK button, you can make settings with fewer button operations and without displaying the shooting menu. This is convenient for frequently used functions.
Set the functions you want to assign to the ADJ./OK button with [ADJ Button Setting 1/2/3/4] on the setup menu.
At the time of purchase, four of the functions are assigned. You can change the assigned functions. For the operating procedure, see P.176.
In shooting mode, press the ADJ./OK button.

The ADJ. mode screen appears.
62
Press the ADJ./OK button #$ to select the desired item.

The screenshots below are examples of the screen display when [Exposure Comp.], [White Balance], [ISO], and [Quality] are assigned to [ADJ Button Setting 1] to [ADJ Button Setting 4] with the setup menu. The fifth icon (AE/AF target shift) is fixed and cannot be changed in the setup menu.
ADJ Button Setting 1
(AE/AF target shift GP.64)
4 5
Press the ADJ./OK button !" to select the desired setting. Press the ADJ./OK button to confirm the setting.
Note ---------------------------------------------------------------------------------------------For functions that can be assigned to the ADJ./OK button and instructions on how to assign them, see P.176.
63
Shifting the AE and AF Targets

When you are taking a picture, you can use the ADJ./OK button to shift the target for the automatic exposure (AE) and/or the auto focus (AF) without having to move the camera. This is particularly useful when you are using a tripod to take pictures. 1 ADJ. Button Functions
Available Setting AE/AF Description AE and AF are set to Spot AE and Spot AF respectively and the target can be moved for both simultaneously. (The targets for Spot AE and Spot AF occupy the same position.) The AF is set to Spot AF and the target can be moved. The exposure metering is set to the mode selected in [Exposure Metering] in the shooting menu. (GP.108) The AE is set to Spot AE and the target can be moved. The focus is set to the mode selected in [Focus] in the shooting menu. (GP.103)
AF
AE
1 2 3 4
Turn the mode dial to 5, Q or R. Press the ADJ./OK button #$ to select P. Press the button !" to select the setting and then press the ADJ./OK button.
The target shift screen appears.
Press the ADJ./OK button in shooting mode.
AE/AF AF AE Off
Move Slctn Ok
Press the button !"#$ to move the cross-mark to the desired target position.
Pressing the DISP. button returns the display to the screen in Step 3.
6 7 8
64
Select
Ok
Half-press the shutter release button.

If [AE/AF] is selected, the Spot AE/Spot AF position is displayed. If [AF] is selected, the Spot AF position is displayed. If [AE] is selected, the Spot AE position and focusing frame are displayed.
Note --------------------------------------------------------------------------------------------- In scene mode and movie mode, the macro target can be shifted by pressing the ADJ./ OK button and selecting U. See Step 3 and beyond on P.67 for the operating procedure after selecting U. If the macro target shift function is activated using the Fn button (GP.67) and not canceled, P will not be displayed even if the ADJ./OK button is pressed. You cannot use the AE/AF target shift function if [Focus] (G P.103) is set to [Continuous AF], [Multi-trgt AF], or [MF]. If the following operations are performed after shifting the target, the shifted target returns to the center. The [AE], [AF], or [AE/AF] settings are changed. [Focus] is set to [Continuous AF], [Multi-trgt AF], or [MF].
65
2 Using the Fn (Function) Button

When a function is assigned to the Fn (Function) button with [Set Fn Button] on the setup menu (G P.174), you can easily switch from one function to another simply by pressing the Fn button. The following functions can be assigned to the Fn button. For the operating procedure of each function, see the corresponding reference page.
Available Setting Description Macro Target Moves the AF target without moving the camera to *Default setting shoot close-ups. AE Lock Locks the exposure. AF/Cont. AF Switches between auto focus (*) and continuous AF. AF/M-trgt AF Switches between auto focus (*) and multi-target AF. AF/MF Switches between auto focus (*) and manual focus. AF/Snap Switches between auto focus (*) and snap mode. Step Zoom, AT-BKT, Switches between on and off for each function. WB-BKT, CL-BKT, FOCUS-BKT (*) [Multi AF] or [Spot AF] Refer to P.67 P.68 P.69 P.70 P.71 P.72 P.73
Note --------------------------------------------------------------------------------------------- For information on the items that can be assigned in each shooting mode, see P.177. The Fn button can not be used as described above when [Miniaturize] is selected in scene mode. Pressing the Fn button in playback mode displays the image assigned with [Flag Function Setting]. For the operating procedure, see P.140-142. Selecting [Trim], [Level Compensation] (when [Manual] is selected), or [White Balance Compensation] on the playback menu, and pressing the Fn button displays the screen that describes the operating procedure. (G P.144, 148, 150)
66
Shifting the AF Target for Macro Shooting

You can shift the AF target without moving the camera to take a close-up picture. You can lock the focus (G P.34) at the position where the macro target is shifted and shoot the picture. This is particularly useful when you are using a tripod to take pictures.
1 2 3
Set [Set Fn Button] to [Macro Target] on the setup menu.

For the operating procedure, see P.174.
With the camera ready to shoot, press the Fn button.

The macro target shift screen appears.
Press the ADJ./OK button !"#$ to move the crossmark to the desired target position. Press the ADJ./OK button.
Pressing the DISP. button cancels the macro target shift function.
4 5 6

The camera focuses on the area at the position of the cross-mark.

Pressing the ADJ./OK button toward N (Macro) cancels the macro target shift function. If the AE/AF target shift function is activated using the ADJ./OK button (G P.64) and not canceled, the AE/AF target shift function cannot be used by pressing the Fn button.
Note ----------------------------------------------------------------------------------------------
67
Assigning [AE Lock] to the Fn (Function) button (G P.174) and then pressing the Fn button during shooting allows you to lock or cancel the exposure.
Locking the Exposure
1 2
Turn the mode dial to 5, SCENE, R or Q.

Set [Set Fn Button] to [AE Lock] on the setup menu. Check that the camera is ready to shoot. Put the subject of your photo in the center of the picture display and press the Fn button.
The exposure is locked and the AEL mark, aperture value, and shutter speed appear on the screen. Pressing the Fn button again cancels the AE lock.
3 4
Note --------------------------------------------------------------------------------------------- The AE lock function can only be used when [Time Exposure] is set to [Off]. AE lock is not available when [AUTO] is selected for [Dynamic Range Expansion].
68
If [AF/Cont. AF] is assigned to the Fn (Function) button (G P.174), the Fn button can be used to toggle between [Continuous AF] and whichever of [Multi AF] and [Spot AF] is currently selected for [Focus] (or, if [Continuous AF] is selected for [Focus], between [Continuous AF] and whichever of [Multi AF] and [Spot AF] was last selected for [Focus] before [Continuous AF]).
[Focus] setting Multi AF Spot AF Continuous AF Press the Fn button Switches between [Continuous AF] and [Multi AF]. Switches between [Continuous AF] and [Spot AF]. Switches between [Continuous AF] and whichever of [Multi AF] and [Spot AF] was last selected for [Focus].
AF/Cont. AF
1 2
Set [Set Fn Button] to [AF/Cont. AF] on the setup menu.


When the focus mode changes to [Continuous AF], the symbol appears on the screen.
Caution-----------------------------------------------------------------------------------------When [Focus] is set to [M-trgt AF], [Snap], [MF] or [A] (G P.103), pressing the Fn button does not switch between AF and Continuous AF. You can also use the shooting menu to make the [Focus] setting. (G P.103)
Note ----------------------------------------------------------------------------------------------
69
If [AF/M-trgt AF] is assigned to the Fn (Function) button (G P.174), the Fn button can be used to toggle between [Multi-trgt AF] and the AF mode currently selected for [Focus] (or, if [Multi-trgt AF] is selected for [Focus], between [Multi-trgt AF] and whatever AF mode was last selected for [Focus] before [Multi-trgt AF]).
[Focus] setting Multi AF Spot AF Continuous AF Multi-trgt AF Press the Fn button Switches between [Multi-trgt AF] and [Multi AF]. Switches between [Multi-trgt AF] and [Spot AF]. Switches between [Multi-trgt AF] and [Continuous AF]. Switches between [Multi-trgt AF] and the AF mode last selected for [Focus].
AF/M-trgt AF
1 2
Set [Set Fn Button] to [AF/M-trgt AF] on the setup menu.


When the focus mode changes to [Multi-trgt AF], the symbol appears on the screen.
Caution-----------------------------------------------------------------------------------------When [Focus] is set to [Snap], [MF] or [A] (G P.103), pressing the Fn button does not switch between AF and multi-target AF. For information on how to use multi-target AF, see P.104. You can also use the shooting menu to make the [Focus] setting. (G P.103)
Note ----------------------------------------------------------------------------------------------
70
If [AF/MF] is assigned to the Fn (Function) button (G P.174), the Fn button can be used to toggle between [MF] and the AF mode currently selected for [Focus] (or, if [MF] is selected for [Focus], between [MF] and whatever AF mode was last selected for [Focus] before [MF]).
[Focus] setting Multi AF Spot AF Continuous AF MF Press the Fn button Switches between [MF] and [Multi AF]. Switches between [MF] and [Spot AF]. Switches between [MF] and [Continuous AF]. Switches between [MF] and the AF mode last selected for [Focus].
AF/MF
1 2
Set [Set Fn Button] to [AF/MF] on the setup menu.


When the focus mode changes to manual focus, the [MF] symbol appears at the upper right of the screen.
Hold
Caution-----------------------------------------------------------------------------------------When [Focus] is set to [Multi-trgt AF], [Snap] or [A] (G P.103), pressing the Fn button does not switch between AF and MF. For information on how to use manual focus, see P.105. You can also use the shooting menu to make the [Focus] setting. (G P.103)
Note ----------------------------------------------------------------------------------------------
71
Locking the focus at the focus lock position -------------------------------------You can press the Fn button to switch AF/MF and lock the focus at the focus lock position (AF Lock). Use the following operating procedure. 1 With the camera set to auto focus, half-press the shutter release button to focus on the subject. (Focus Lock) 2 Release the shutter release button and press the Fn button. The camera is set to MF and the shooting distance is fixed at the focus lock position. To return to auto focus mode, press the Fn button again.
If [AF/Snap] is assigned to the Fn (Function) button (G P.174), the Fn button can be used to toggle between [Snap] and the AF mode currently selected for [Focus] (or, if [Snap] is selected for [Focus], between [Snap] and whatever AF mode was last selected for [Focus] before [Snap]).
[Focus] setting Multi AF Spot AF Continuous AF Snap Press the Fn button Switches between [Snap] and [Multi AF]. Switches between [Snap] and [Spot AF]. Switches between [Snap] and [Continuous AF]. Switches between [Snap] and the AF mode last selected for [Focus].
AF/Snap
1 2
Set [Set Fn Button] to [AF/Snap] on the setup menu.


When the focus mode changes to snap mode, the symbol appears at the upper right of the screen.
Caution-----------------------------------------------------------------------------------------When [Focus] is set to [Multi-trgt AF], [MF] or [A] (G P.103), pressing the Fn button does not switch between AF and Snap. You can also use the shooting menu to make the [Focus] setting. (G P.103)
Note ----------------------------------------------------------------------------------------------
72
Assigning one of the following functions to the Fn button (G P.174) and then pressing the Fn button allows you to switch between on and off for that function. Step Zoom, AT-BKT, WB-BKT, CL-BKT, FOCUS-BKT
Switching Between On and Off for Various Functions
1 2 3
Turn the mode dial to 5, SCENE, R or Q.
Set [Set Fn Button] to one of the above items on the setup menu.

This switches between on and off for the selected function.
Note ---------------------------------------------------------------------------------------------The settings of the functions can be changed using the shooting menu. (GP.97)
73
3 Shooting Mode Types
Scene Mode (SCENE)

You can use scene mode to select from among twelve still image modes, and shoot with settings automatically optimized for shooting conditions. Scene Modes
Use for portraits. The camera automatically detects, and adjusts focus, exposure, and white balance, for the subject's face. For detailed operations, see P.77. Use when taking pictures of moving objects. Sports Use when taking portrait pictures against a nightscape. The flash fires automatically. The shutter speed slows down, so be careful of camera shake. Use when taking scenery pictures with abundant greenery or blue sky. Landscape Use when shooting night scenes. In nightscape mode, the flash fires when all of the following conditions are satisfied: The flash is set to [Auto]. The flash is determined to be necessary because it is dark. There is a figure or another object nearby. Use when taking pictures in dimly lit places. The picture display also becomes brighter. High Sens Use in museums and in other situations in which lights or sounds emitted by the camera may be unwelcome. The flash, AF auxiliary light, and speaker turn off and flash, AF auxiliary light, and sound settings can not be adjusted. Automatically optimizes the zoom position to shoot the subject larger than with normal macro shooting. The optical zoom cannot be used in this mode. For detailed operations, see P.78.
Portrait
Night. Port.
Nightscape
Discreet Mode
Zoom Macro
74
High Contrast B&W
Use to create black-and-white images with higher contrast than those normally produced using black and white (G P.109). Produces grainy images similar to those taken with highly sensitive film or high gain film processing. Use to create pictures that appear to be photos of dioramas. For detailed information, see P.79.
Miniaturize Use to straighten a rectangular object, such as a message board or business card, shot at an angle to make it look as if it were shot squarely. For detailed operations, see P.81.
Skew Correct Mode
3
In skew correction mode, choose from [N1280] or [N640] for [Picture Quality/Size]. (GP.101) Use when capturing text images, for example notes written on a whiteboard at a meeting. Images are captured in black and white. You can also change the shading of text. (GP.82) You can set the image size to either 3456 2592 or 2048 1536 pixels. (GP.101)
Shooting Mode Types
Text Mode
Caution-----------------------------------------------------------------------------------------In [Discreet Mode], the camera does not beep, flash mode can not be selected with the ADJ./OK button, and the self-timer lamp and beep indicator are disabled in self-timer mode.
Note ---------------------------------------------------------------------------------------------For information on the shooting menu items in scene mode, see P.99.
75
Turn the mode dial to SCENE.
The camera is ready to shoot and the selected scene mode is displayed at the top of the picture display.
2 3
Press the MENU button to change the scene mode.

The scene mode selection screen appears.
Press the ADJ./OK button !"#$ to select the scene mode.
4 5

The scene mode type is displayed at the top of the picture display.
Press the shutter release button to shoot the picture.

Changing the shooting menu or setup menu setting in scene mode ----Press the MENU button in shooting mode and then press the ADJ./OK button !"#$ to select the [MODE] tab. Now press the ADJ./OK button " once to display the shooting menu or twice to display the setup menu. See P.100 or P.166 for more information on specifying menu settings.
76
Using Portrait Mode
1 2 3 4 5 6

Press the MENU button.

Press the ADJ./OK button !"#$ to select [Portrait]. Press the ADJ./OK button. Compose your picture.
When a face is recognized, a frame with the size of the recognized face is displayed in blue. Up to eight frames can be displayed.

Even if several faces are recognized, the camera selects the optimal focus. When a recognized face is focused, the frame for that face is displayed in green. If the camera cannot focus on a recognized face, the frame for that face disappears. The exposure and white balance are locked.

Caution-----------------------------------------------------------------------------------------The camera may not be able to recognize faces in the following cases: When the face is side-view, tilted, or moving When the camera is tilted or upside down (the shutter release button is facing down) When part of the face is hidden When the face is not clearly visible because of dark surroundings When the subject is too far away (Make sure that the face appearing in the picture display is vertically longer than 1 block marked by the grid guide GP.56) When the face is at the edge of the picture display
77
Shooting in Zoom Macro Mode
1 2 3 4 5 6 7


Press the ADJ./OK button !"#$ to select [Zoom Macro]. Press the ADJ./OK button. Turn the zoom lever toward z (Telephoto) or Z (Wideangle).
The zoom level appears on the picture display.
Caution----------------------------------------------------------------------------------------- If zoom macro mode is selected when the zoom position is set to the wide-angle side (28 mm focal length*), the zoom position is automatically fixed at 70 mm*. (* Equivalent to that on a 35 mm camera) When using the zoom macro, you can shoot close-ups within the following distances: Focal Length(*) Minimum Shooting Distance Shooting Range (from the front of the lens) 70 mm Approx. 1 cm Approx. 19 mm 14 mm (when digital zoom is not used) 335 mm Approx. 1 cm Approx. 4.0 mm 3.0 mm (when 4.8 digital zoom is used)
(*)
If [Picture Quality/Size] is set to 3456 2592 and [Digital Zoom Image] is set to [Auto Resize], the auto resize zoom is activated. (GP.185)
78
Shooting in Miniaturization Mode

This mode creates pictures that appear to be photos of dioramas. It is most effective when pictures are taken from a high vantage point.
1 2 3 4 5


Press the ADJ./OK button !"#$ to select [Miniaturize]. Press the ADJ./OK button. Press the Fn button.
Miniaturization settings will be displayed, with the areas that will not be in focus in the final photograph shown in gray. Press the DISP. button to exit without taking a picture.
Note ---------------------------------------------------------------------------------------------When taking pictures in tall orientation, press the D button to re-orient the area that will be in focus.
79
Press ADJ./OK button !" to reposition the area that will be in focus.
For help, press the Fn button. Press the Fn button again to clear help from the display.
7
Press ADJ./OK button #$ to choose the width of the area that will be in focus.
8 9 10
Press the ADJ./OK button. Compose your picture and half-press the shutter release button. Press the shutter release button all the way to shoot the picture.
Caution----------------------------------------------------------------------------------------- [Image Settings] is not available in miniaturization mode. The focus of the final image differs slightly from that in the image displayed immediately after shooting.
80
Using Skew Correction Mode
1 2 3 4 5


Press the ADJ./OK button !"#$ to select [Skew Correct Mode]. Press the ADJ./OK button. Press the shutter release button to shoot the picture.
The display indicates that the image is being processed, and then the area recognized as the correction range is displayed with an orange frame. Up to five areas can be recognized. If the target area cannot be detected, an error message appears. The original image remains unchanged. To select another correction area, move the orange frame to the target area by pressing the ADJ./OK button $. To cancel skew correction, press the ADJ./OK button !. Even if you cancel skew correction, the original image remains unchanged.

The display indicates that the image is being corrected, and then the corrected image is recorded. The original image remains unchanged.
Caution-----------------------------------------------------------------------------------------When [Skew Correct Mode] is selected, note the following: To shoot the subject as large as possible, position it so that the entire portion of the subject is visible on the picture display. The camera may fail to recognize the subject in the following cases: When the image is out of focus When four edges of the subject are not clearly visible When it is hard to distinguish between the subject and background When the background is complicated Two images, one before correction and the other after correction, are recorded. If the number of remaining shots is less than two, you cannot shoot the subject. The correction area may not be detected properly if the [Date Imprint] function is activated.
Note ---------------------------------------------------------------------------------------------You can also correct the skew of a previously shot still image. (GP.152)
81
Changing the Text Density

If you are shooting with [Text Mode] in scene mode, you can use the ADJ./OK button to change the shading of text. You can select from [Deep], [Normal] and [Light].
To change the setting, use the shooting menu or the ADJ./OK button. This section explains easy ways to change the setting with the ADJ./OK button. To use the shooting menu, see Using the Menu (GP.100).
1 2
Turn the mode dial to SCENE. Press the MENU button.

Press the ADJ./OK button !"#$ to select [Text Mode] and then press the ADJ./OK button.
4 5

The text density menu appears.
Press the ADJ./OK button !" to select the desired density setting.
You can also press the shutter release button to take the picture.

The text density setting does not appear on the screen.
82
My Settings Mode (MY1/MY2)

Setting the mode dial to MY1 or MY2 allows you to shoot with preset settings. Use [Reg. My Settings] on the setup menu to make the MY1 and MY2 settings. (GP.171)
Turn the mode dial to MY1 or MY2.

Turn the mode dial to MY1 to make the settings for [MY1] in [Reg. My Settings]. Turn the mode dial to MY2 to make the settings for [MY2] in [Reg. My Settings].
Press the shutter release button.

Note ---------------------------------------------------------------------------------------------You can change the camera settings even in My Settings mode. Changing the mode or turning the camera off returns the changed settings to the original MY1 and MY2 settings.
83
Dynamic Range Double Shot Mode (Q)

The dynamic range of a digital camera refers to the range of brightness that can be processed by the camera. When you shoot a scene with high contrast, such as both a subject in sunlight and a subject in a shaded area, the bright areas appear overly bright and the image does not look natural. This is because the range of brightness that can be processed by the camera is narrower than that of the human eye. When you set the mode dial to Q and shoot, the scene is reproduced with a smooth transition from the bright areas to the dark areas, allowing you to capture a more natural-looking image. Note ---------------------------------------------------------------------------------------------With Dynamic Range Double Shot, two consecutive pictures are taken with different exposures and then the areas with the appropriate exposure are combined together. This mode uses a longer shooting time than other modes, so be careful of camera shake when taking pictures. The J symbol is always displayed.
1 2
Turn the mode dial to Q.
Two consecutive shots
Combined and saved
84
Caution-----------------------------------------------------------------------------------------The digital zoom is disabled. The flash cannot be used. [Continuous AF] is not available for [Focus] (G P.103). Dynamic range double shot may not be effective if the shooting location is overly bright or dark. [Multi] metering is recommended. When shooting a fast-moving subject, the subject may be distorted in the recorded image. Flicker from fluorescent lights may appear as horizontal bands. Fluorescent lighting may also affect colors and brightness.
Dynamic Range Expansion Effect

You can select from five dynamic range expansion effects, from [AUTO], [Very Weak], [Weak], [Medium], or [Strong]. The stronger the expansion effect, the wider the range of brightness that can be processed by the camera. 3 Shooting Mode Types
1 2 3
Turn the mode dial to Q.
Display the shooting menu.

Press the ADJ./OK button " to select [Dynamic Range Expansion] and press the button $. Press the button !" to select the setting and then press the ADJ./OK button.
Caution-----------------------------------------------------------------------------------------If [AE Lock] is assigned to the Fn button, exposure can not be locked when [AUTO] is selected for [Dynamic Range Expansion].
85
Dynamic Range Expansion Plus Normal Shooting

This records two images, an image taken with expanded dynamic range and an image taken with normal shooting.
1 2 3 4 5
Turn the mode dial to Q. Display the shooting menu.
Expanded dynamic range image
Normal shooting image
Press the ADJ./OK button " to select [Plus Normal Shooting] and press the button $. Press the button !" to select [On] and then press the ADJ./ OK button. Press the shutter release button to shoot the picture.
The confirmation screen displays a comparison of the image taken with normal shooting and the image taken with expanded dynamic range.
Note ---------------------------------------------------------------------------------------------The histogram display for both images is displayed on the confirmation screen in Step 5. When [LCD Confirmation Time] is set to [Hold] (GP.182), the confirmation screen remains displayed so you can confirm the histograms and easily compare the images.
86
Turn the mode dial to R to use the various continuous shooting functions. Caution-----------------------------------------------------------------------------------------The time until image recording is complete may be longer when using the internal memory.
Continuous Mode (R)
Note --------------------------------------------------------------------------------------------- The flash cannot be used. The camera shake correction function cannot be used in continuous mode. If you set the mode dial to R while the camera shake correction function is enabled, E disappears from the picture display. The focus, exposure value, and white balance are locked in continuous mode. ISO sensitivity is raised in continuous shooting mode. When [Card Sequence No.] is set to [On] (GP.193) and the last four digits of the file number exceed 9999 during continuous shooting, a separate folder is created in the SD memory card and successive pictures taken in continuous mode are stored in this folder.
Changing settings on the shooting menu or setup menu during continuous mode-----------------------------------------------------------------Press the MENU button in shooting mode and then press the ADJ./OK button !"#$ to select the [MODE] tab. Now press the ADJ./OK button " once to display the shooting menu or twice to display the setup menu. See P.100 or P.166 for more information on specifying menu settings.
Normal Continuous Mode

This is the normal continuous mode. Pictures continue to be taken for as long as you hold down the shutter release button. Images are recorded one at a time, just as in normal shooting.
1 2
Turn the mode dial to R. Press the MENU button.
The continuous mode selection screen appears.
87
Press the ADJ./OK button !" to select [Continuous Mode] and then press the ADJ./OK button.
The symbol appears on the screen.
Compose your picture and then press and hold the shutter release button.
Pictures continue to be taken for as long as you hold down the shutter release button.
5
Release your finger from the shutter release button to stop shooting continuously.
Caution-----------------------------------------------------------------------------------------The maximum number of images that can be shot in continuous mode is 999. Even if there is space in the memory for 1,000 or more images, [999] is displayed on the screen.
Note ---------------------------------------------------------------------------------------------The number of images that can be shot in continuous mode depends on the image size setting. (GP.232)
M-Cont Plus (9M)

In this mode, the camera shoots while the shutter-release button is pressed, but only the last 15 frames (about the last three seconds of shooting) are recorded to create a single multi-picture (MP) file.
(2) the camera records the frames taken in the last three seconds.
(1) When you remove your finger from the shutter release button...
88
1 2 3 4 5

Press the ADJ./OK button !" to select [M-Cont Plus (9M)]. Press the ADJ./OK button.
The camera memorizes the scene while you hold down the shutter release button.
Release your finger from the shutter release button.

Shooting ends and the last 15 shots (about the last three seconds of shooting) are recorded in a single MP file. If you remove your finger from the shutter-release button before 15 shots are recorded, the MP file will contain all the shots taken while the shutter-release button was pressed.
Caution-----------------------------------------------------------------------------------------The time needed to record 15 frames may increase if lighting is poor.
Note --------------------------------------------------------------------------------------------- Image size is fixed at N3456 (9M). The date and orientation of each shot in the sequence are recorded separately.
MP file ------------------------------------------------------------------------------------------MP is a file format for recording a set of still images.
89
M-Cont Plus (2M)

In this mode, the camera shoots while the shutter-release button is pressed, but only the last 30 frames (about the last second of shooting) are recorded to create a single multi-picture (MP) file.
(2) the camera records the frames taken in the last second.
(1) When you remove your finger from the shutter release button...
1 2 3 4 5

Shooting Mode Types
Press the ADJ./OK button !" to select [M-Cont Plus (2M)]. Press the ADJ./OK button.
The camera memorizes the scene while you hold down the shutter release button.
Release your finger from the shutter release button.

Shooting ends and the last 30 shots (about the last second of shooting) are recorded in a single MP file. If you remove your finger from the shutter-release button before 30 shots are recorded, the MP file will contain all the shots taken while the shutter-release button was pressed.
90
Caution----------------------------------------------------------------------------------------- When shooting a fast-moving subject, the subject may be distorted in the recorded image. Flickering may be recorded as a horizontal band when shooting under fluorescent lights. Date imprint is not available.
Note --------------------------------------------------------------------------------------------- The image size is fixed at N1728 (2M). The date and orientation of the last shot in the sequence are also used for the remaining frames.
91
Speed Cont
Speed Cont allows you to record 120 consecutive images in the (approx.) 1 second (120 frames per second) or 120 consecutive images in the (approx.) 2 seconds (60 frames per second) from when the shutter release button is pressed. The consecutively shot still images are grouped together as a set and are recorded as one MP file.
1 2 3

Press the ADJ./OK button !" to select either of the following.

[Speed Cont (Low)] : 120 consecutive images are recorded in 2 seconds. [Speed Cont (High)] : 120 consecutive images are recorded in 1 second.
4 5

Compose your picture and then press the shutter release button.
120 consecutive images are taken automatically. If you remove your finger from the shutter-release button before 120 shots are recorded, the MP file will contain all the shots taken while the shutter-release button was pressed.
92
Caution----------------------------------------------------------------------------------------- When shooting a fast-moving subject, the subject may be distorted in the recorded image. Flickering may be recorded as a horizontal band when shooting under fluorescent lights.
Note --------------------------------------------------------------------------------------------- The image size is fixed at N640 (VGA). The date and orientation of the last shot in the sequence are also used for the remaining frames.
93
Movie Mode (3)

Shooting Movies
You can shoot movies with sound. You can set the image size to either 640 480 or 320 240 pixels. You can set the number of frames shot per second (frame rate) to either 30 or 15. Each movie you shoot is recorded as an AVI file.
1 2
Turn the mode dial to 3. Press the shutter release button to start recording the movie.
A blinking [ REC] icon, the recording time, and the time available are displayed during recording.
Press the shutter release button to finish recording the movie.

Caution----------------------------------------------------------------------------------------- While shooting movies, operation sounds may be recorded. The maximum recording time per shooting depends on the size of your SD memory card (GP.96). Even if you are within the maximum recording time, recording may end depending on your card. The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB. The camera shake correction function does not work in movie mode. If you set the mode dial to 3 while the camera shake correction function is enabled, E disappears from the picture display. When shooting a fast-moving subject, the subject may be distorted in the recorded image. Flickering may be recorded as a horizontal band when shooting under fluorescent lights.
94
Note --------------------------------------------------------------------------------------------- The flash cannot be used. While shooting movies, only digital zoom can be used (up to 4.0). (GP.40) When the shutter release button is pressed in Step 2, the camera focuses on the subject. The remaining recording time may not change uniformly because it is recalculated from the remaining memory capacity during movie recording. Use the shooting menu to set the image size and frame rate of movies. The shooting menu items for movie mode differ from those in still image mode. (GP.98) Depending on the remaining battery level, the battery may become depleted during movie shooting. Use of a battery with adequate remaining power is recommended. Use of a high speed SD memory card with sufficient memory is recommended when shooting for long periods.
Setting the Frame Rate

You can select the number of shot frames per second (frame rate) in movie mode.
1 2 3 4 5
Turn the mode dial to 3. Press the MENU button.

The shooting menu is displayed.
Press the ADJ./OK button " to select [Frame Rate] and press the button $. Press the button !" to select [30 Frames/Sec] or [15 Frames/ Sec]. Press the ADJ./OK button.
The setting appears on the screen.
Movie Frames--------------------------------------------------------------------------------Movies consist of many frames whose images appear to be moving when displayed at high speed.
95
Note --------------------------------------------------------------------------------------------- Movie recording time may vary depending on the capacity of the recording destination (internal memory or SD memory card), shooting conditions, and the type and manufacturer of the SD memory card. The estimated total recording time is shown below. The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB.
Internal 1 GB Memory 1 min 18 min 42 s 20 s 51 s 9 min 15 s 4 min 46 min 19 s 19 s 2 min 23 min 12 s 42 s 2 GB 37 min 17 s 18 min 49 s 94 min 11 s 48 min 13 s 4 GB 76 min 41 s 38 min 41 s 193 min 41 s 99 min 8s 8 GB 149 min 40 s 75 min 31 s 378 min 2s 193 min 30 s 16 GB 299 min 50 s 151 min 18 s 757 min 18 s 387 min 39 s 32 GB 601 min 28 s 303 min 31 s 1519 min 7s 777 min 37 s
640 480 (15 Frames/Sec) 640 480 (30 Frames/Sec) 320 240 (15 Frames/Sec) 320 240 (30 Frames/Sec)
96
4 Shooting Menu
About the Shooting Menu

Press the MENU button in shooting mode to display the shooting menu. The shooting menu can be used to set the following shooting settings.
Setting Dynamic Range Expansion Plus Normal Shooting Picture Quality/Size Options [Default Settings] [AUTO], Very Weak, Weak, Medium, Strong Refer to P.84 P.86 P.101
[Off], On F3456(9M), [N3456(9M)], F3:2(8M), F1:1(6M), N3072(7M), N2592(5M), N2048(3M), N1280(1M), N640(VGA) Movie Size [640], 320 Frame Rate [30 Frames/Sec], 15 Frames/Sec Density Deep, [Normal], Light Size [3456(9M)], 2048(3M) Focus [Multi AF], Spot AF, Continuous AF, Multi-trgt AF, MF, Snap, A Pre-AF [Off], On Exposure Metering [Multi], Center, Spot Image Settings Vivid, [Standard], Cust. Settings, Black & White, Sepia Flash Exposure +2.0, +1.7, +1.3, +1.0, +0.7, +0.3, [0.0], -0.3, -0.7, Compensation -1.0, -1.3, -1.7, -2.0 (1/3EV increments) Auto Bracket [Off], On, WB-BKT, CL-BKT, FOCUS-BKT Time Exposure [Off], 1 second, 2 seconds, 4 seconds, 8 seconds Custom Self-Timer Pictures (1 to 10 pictures [2 Pics]), Interval (5 to 10 seconds [5 Sec.]) Interval Shooting [0 Sec.], 5 seconds to 1 hour Camera Shake Correction Off, [On] Slow Shutter Limit [Off], 1/2Sec., 1/4Sec., 1/8Sec. Date Imprint [Off], Date, Date and Time Exposure Compensation +2.0, +1.7, +1.3, +1.0, +0.7, +0.3, [0.0], -0.3, -0.7, -1.0, -1.3, -1.7, -2.0 (1/3EV increments) White Balance Auto, [Multi-P AUTO], (Outdoors), (Cloudy), (Incandescent Lamp), (Incandescent Lamp 2), (Fluorescent Lamp), (Manual Settings)
P.101 P.95 P.82 P.101 P.103 P.107 P.108 P.109 P.111 P.112 P.117 P.118 P.119 P.121 P.122 P.123 P.124 P.126
4 Shooting Menu
97
Setting ISO Setting Restore Defaults
Options [Default Settings] Refer to [Auto], Auto-Hi, ISO 80, ISO 100, ISO 200, ISO 400, P.128 ISO 800, ISO 1600 P.130
Available Settings for Each Shooting Mode --------------------------------------T displayed items vary depending on the shooting mode. See the following table. Refer to P.99 for more information on the items that can be set for each scene mode. Setting Picture Quality/Size Movie Size Frame Rate Focus Pre-AF Density Size Exposure Metering Image Settings Flash Exposure Compensation Auto Bracket Dynamic Range Expansion Plus Normal Shooting Time Exposure Custom Self-Timer Interval Shooting Camera Shake Correction Slow Shutter Limit Date Imprint Exposure Compensation White Balance ISO Setting Restore Defaults * [Discreet Mode] only. 5 SCENE O O O O O O O O O O O O O O O O O O O O O -* O O O O O O O O O O O O O -* EASY O O R O O O O O O O O O O Q O O O O O O O O O O O O O 3 O O O O O -
4 Shooting Menu
98
When Mode Dial is Set to SCENE-----------------------------------------------------When the mode dial is set to SCENE, the displayed items differ depending on the selected scene mode. See the following table. Portrait Sports Night. Port. Landscape Nightscape High Sens Discreet Mode Zoom Macro High Contrast B&W Miniaturize Skew Correct Mode Text Mode O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O -
Setting
Refer to
Picture Quality/Size Density Size Focus Pre-AF Exposure Metering Image Settings Flash Exposure Compensation Auto Bracket Time Exposure Custom Self-Timer Interval Shooting Camera Shake Correction Slow Shutter Limit Date Imprint Exposure Compensation White Balance ISO Setting Restore Defaults O Available, - Not available
P.101 P.82 P.101 P.103 P.107 P.108 P.109 P.111 P.112 P.117 P.118 P.119 P.121 P.122 P.123 P.124 P.126 P.128 P.130
4 Shooting Menu
Note ---------------------------------------------------------------------------------------------The setup menu can be accessed from within the shooting menu. (GP.165)
99
Using the Menu

In the instructions of this manual, the menu selection is confirmed when you Press the ADJ./ OK button (as in Step 5 below), but you can also confirm the setting and return to the menu screen by pressing the ADJ./OK button #.
Press the MENU button in shooting mode.

The shooting menu is displayed. In scene mode or continuous mode, press the ADJ./OK button !"#$ to select the [MODE] tab, and then press the ADJ./OK button ". The shooting menu appears.
2
4 Shooting Menu
Indicates the range of displayed screens.
Press the ADJ./OK button !" to select the desired menu item.
If the DISP. button is pressed at this point, the cursor moves to the shooting menu tab. Press the ADJ./OK button " at the bottom item to display the next screen.
3 4 5
Press the ADJ./OK button $.

The menu item settings are displayed.
Press the ADJ./OK button !" to select the setting. Press the ADJ./OK button.
The setting is confirmed, the shooting menu disappears and the camera is ready to shoot. Pressing the ADJ./OK button # in Step 5 confirms the setting and the display returns to the screen shown in Step 2.
100
Picture Quality Mode/Image Size

The file size of a shot still image depends on the picture quality mode and image size settings. For movies, choose the movie size. Figures inside the bold frame indicate those shown on the screen. Still Images
Image Size 3456 2592 3456 2304 2592 2592 3072 2304 2592 1944 2048 1536 1280 960 640 480 Picture Quality Mode F (Fine) N (Normal) F (Fine) F (Fine) N (Normal) N (Normal) N (Normal) N (Normal) N (Normal) Picture Quality/ Size F3456(9M) N3456(9M) F3:2(8M) F1:1(6M) N3072(7M) N2592(5M) N2048(3M) N1280(1M) N640(VGA) Remarks For creating large prints. For downloading to a computer for trimming and other processes.
For creating prints. For shooting a large number of pictures. For shooting a large number of pictures. For attaching to e-mail. For posting on a website.
4 Shooting Menu
When scene mode is set to [Skew Correct Mode], you can select 1280 960 or 640 480. When scene mode is set to [Text Mode], you can select 3456 2592 or 2048 1536. Movies
Image Size 640 480 320 240 Movie Size 640 320
You can also choose the number of frames for movies. (GP.95)
101
Note --------------------------------------------------------------------------------------------- For picture quality mode, select normal mode (N) or fine mode (F), depending on the desired compression ratio. Normal mode: The compression ratio is high, resulting in a small file. Normally, shooting is done in this mode. Fine mode: The compression ratio is low, resulting in a large file, but the picture quality is better than in Normal. The number of images that can be stored in the internal memory or SD memory card depends on the [Picture Quality/Size] setting. (GP.232)
1 2
4 Shooting Menu

For information on using the menu, see P.100.
Check that [Picture Quality/ Size] is selected and press the ADJ./OK button $. Press the button !" to select the desired setting.
Still Images
Movies

102
Focusing Modes
If you shoot the subject in the default focusing mode, the camera focuses automatically with Auto Focus (AF). Select from the following 7 focusing modes. Focusing Modes
Symbol None Mode Multi AF Description Measures the distances from 9 AF areas and focuses to the nearest AF area. This prevents the center of the picture display from becoming out of focus and enables you to shoot with a minimum number of out-of-focus pictures. Selects one AF area at the center of the picture display to allow the camera to focus on this area automatically. Measures the distance from the center AF area and focuses on the subject in the center area. If the subject moves while the shutter-release button is pressed halfway, the camera will track the subject while focusing continuously. Takes 7 consecutive pictures while shifting the focus to multiple positions. (GP.104) Enables you to adjust the focus manually. (GP.105) Fixes the shooting distance to a short distance (approx. 2.5 m (8.2 ft.)). Fixes the shooting distance to infinity. Infinity is useful for shooting distant scenes.
None
Spot AF Continuous AF
Multi-trgt AF MF (Manual Focus) Snap A (Infinity)
4 Shooting Menu
1 2 3 4

Press the ADJ./OK button " to select [Focus] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
If you select a setting other than [Multi AF] or [Spot AF], a symbol appears on the screen.
Note --------------------------------------------------------------------------------------------- If [Focus] is set to [Multi AF] when using the digital zoom, [Focus] functions according to the [Spot AF] setting. [Continuous AF] is not available in dynamic range double shot mode.
103
Multi-Target AF
When you half-press the shutter release button, the camera automatically determines multiple focus positions. When you then press the shutter release button all the way down, the camera shifts among the different focus positions, taking 7 consecutive pictures. The 7 still images are grouped together as a set and are recorded as an MP file. This function is especially useful for telephoto shooting and shooting with macro mode.
1 2 3 4
Turn the mode dial to 5. Display the shooting menu.

104
Shooting Menu
Press the ADJ./OK button " to select [Focus] and press the button $. Press the button !" to select [Multi-trgt AF] and then press the ADJ./OK button.
Compose your picture and half-press the shutter release button.

The camera automatically detects multiple focus positions. The V symbol appears on the screen when a focus position is detected. The determined focus positions are displayed only during playback. (GP.134) If the focus position cannot be detected, the V symbol blinks on the screen.
Press the shutter release button all the way down.

Consecutive shooting starts, and when the 7 frames are shot, they are recorded as one MP file.
Caution----------------------------------------------------------------------------------------- This function is only available in auto shooting mode. The flash cannot be used. The [Time Exposure] setting is disabled. (GP.117) The camera shake correction function cannot be used. If [Multi-trgt AF] is set while the camera shake correction function is turned on, E changes to F.
4 Shooting Menu
Note --------------------------------------------------------------------------------------------- If this function is turned on when using the digital zoom, the digital zoom is disabled and shooting is performed at the maximum magnification for the optical zoom (10.7). [White Balance] functions according to the [Auto] setting even if it is set to [Multi-P AUTO].
Manual Focus (MF)

If the camera fails to focus automatically, you can focus manually (MF: Manual Focus). Manual focus enables shooting at a fixed distance.

105
2 3 4
Press the ADJ./OK button " to select [Focus] and press the button $. Press the button !" to select [MF]. Press the ADJ./OK button.
[MF] and the focus bar are displayed on the screen.
Hold
5
4 Shooting Menu
Press and hold the ADJ./OK button as required.

Pressing and holding the ADJ./OK button increases the magnification only at the center of the screen. Pressing and holding the ADJ./OK button again returns from enlarged view to normal view.
6 7 8
Adjust the zoom position with the zoom lever as required.

The zoom bar is displayed only when operating the zoom lever.
Press the ADJ./OK button !" to adjust the focus.

Pressing the ADJ./OK button ! adjusts the focus to farther objects. Pressing the ADJ./OK button " adjusts the focus to closer objects.

Note --------------------------------------------------------------------------------------------- In scene mode, manual focus can be used when [Discreet Mode], [Zoom Macro], or [Skew Correct Mode] is selected. You can also use manual focus to focus on objects within the macro shooting range.
106
Pre-AF
If [On] is selected when [Multi AF], [Spot AF], [Continuous AF], or [Multi-trgt AF] is selected for [Focus] (G P.103), the camera will continue to focus even when the shutter-release button is not pressed halfway. This may decrease the time needed to focus when a picture is taken, potentially improving shutter response.
1 2 3 4

Press the ADJ./OK button " to select [Pre-AF] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Caution-----------------------------------------------------------------------------------------Pre-AF is not available when [MF], [Snap], or [A] is selected for [Focus].
4 Shooting Menu
107
Exposure Metering Modes

You can change the metering method (the range to use for metering) used to determine the exposure value. There are three light metering modes. Exposure Metering Modes
Symbol (None) Mode Multi Center Description The entire shooting range is divided into 256 partitions, and each is metered to determine the overall exposure value. The entire image is metered, with emphasis on the center, to determine the exposure value. Use this when the brightness of the center and surroundings are different. Only the center of the image is metered to determine the exposure value. Use this setting when you want to use the brightness at the center. This is useful if there is a marked difference in contrast or backlighting.
Spot
4 Shooting Menu
1 2 3 4

Press the ADJ./OK button " to select [Exposure Metering] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
If you select a setting other than [Multi], a symbol appears on the screen.
108
Picture Quality and Color

You can change the picture quality of an image, including the contrast, sharpness, color and vividness. You can select from the following picture quality settings. Picture Quality Modes
Type Vivid Description Take strong, vivid photos with higher contrast and sharpness and maximum vividness. Standard Creates an image with normal picture quality. Cust. Settings You can select from five [Contrast], [Sharpness], and [Vividness] levels. (GP.110) Black & White Creates a black and white picture. Sepia Creates a sepia-toned picture.
1 2 3

4 Shooting Menu
Press the ADJ./OK button " to select [Image Settings] and press the button $. Press the button !" to select the desired picture quality.
You can set values for [Cust. Settings] (GP.110). If the values are already set, you can set the picture quality by simply selecting [Cust. Settings].

If you selected a setting other than [Standard], the symbol appears on the screen.
Note ---------------------------------------------------------------------------------------------[Color], [Black & White], and [Sepia] can be selected in dynamic range double-shot mode.
109
Custom Settings
1 2 3

Press the ADJ./OK button " to select [Image Settings] and press the button $. Press the button !" to select [Cust. Settings] and press the button $.
The [Image Settings] screen appears. If the values are already set, you can set the picture quality by selecting [Cust. Settings].
4
4
Press the ADJ./OK button !" to select [Contrast], [Sharpness], and [Vividness], and press the button #$ to adjust the settings. Press the ADJ./OK button.
The [Cust. Settings] setting is saved, and the display returns to the shooting menu.
5 6
110
Shooting Menu

Flash Exposure Compensation

You can adjust the light intensity of the flash. You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1 2 3

Press the ADJ./OK button " to select [Flash Exposure Compensation] and press the button $.
The flash exposure compensation bar appears.
Press the button !" to make the setting.

The setting appears on the screen except when the flash mode is set to [Flash Off].
Shooting Menu
Note ---------------------------------------------------------------------------------------------For information on how to use the flash, see P.43.
Caution-----------------------------------------------------------------------------------------Flash exposure compensation may not work outside the flash range (GP.43).
111
Bracket Shooting
Bracket shooting is the function for performing automatic consecutive shooting while changing the exposure, white balance, color, or focus position. Note --------------------------------------------------------------------------------------------- This function is not available in dynamic range double-shot mode, easy shooting mode, and continuous mode. Bracket shooting is not available when [Focus] is set to [Multi-trgt AF]. The flash cannot be used. The [Time Exposure] setting is disabled. (GP.117) Assigning [AT-BKT], [WB-BKT], [CL-BKT], or [FOCUS-BKT] to the Fn (Function) button with [Set Fn Button] (GP.174) allows you to switch between on and off by pressing the Fn button. (GP.66)
4 Shooting Menu
Auto Bracketing
When the auto bracketing function is set to [On], the camera automatically shoots three consecutive shots at three exposure levels (-0.5EV, 0, and +0.5EV) based on the set exposure level.
1 2 3 4

Press the ADJ./OK button " to select [Auto Bracket] and press the button $. Press the button !" to select [On]. Press the ADJ./OK button.
112

Three consecutive shots are taken at 0, -0.5EV, and +0.5EV based on the set exposure compensation setting. When shooting is completed, three still images are displayed on the picture display. They are, from left to right, at -0.5EV (darker), standard exposure compensation setting, and +0.5EV (brighter).
Note --------------------------------------------------------------------------------------------- The exposure compensation can be changed using the shooting menu. (GP.124) [White Balance] functions according to the [Auto] setting even if it is set to [Multi-P AUTO].
White Balance Bracketing

The white balance bracket function automatically records three images - a reddish image, a bluish image, and an image of the current white balance. This is useful if you cannot determine the appropriate white balance. 4 Shooting Menu
1 2 3 4

Press the ADJ./OK button " to select [Auto Bracket] and press the button $. Press the button !" to select [WB-BKT]. Press the ADJ./OK button.
113

Three images (a reddish image, an image equal to the current white balance, and a bluish image) are automatically recorded.
Recording
Red
Blue
Note --------------------------------------------------------------------------------------------- The white balance can be changed using the shooting menu. (GP.126) If [Image Settings] is set to [Black & White] or [Sepia], the white balance bracket function can be set but it does not operate.
Color Bracketing
With color bracketing, three images, a black-and-white, a color, and a sepia image, are recorded. 4 Shooting Menu

2 3 4
Press the ADJ./OK button " to select [Auto Bracket] and press the button $. Press the button !" to select [CL-BKT]. Press the ADJ./OK button.

Three images, a black-and-white, a color, and a sepia image, are recorded.
Black&White
Recording
Sepia
114
Contrast, Sharpness and Vividness During Color Bracket Shooting ------------------------------------------------------------------During color bracket shooting, the contrast, sharpness, and vividness values set in [Image Settings] are applied. However, the values for [Standard] in [Image Settings] apply when [Image Settings] is set to [Black & White] or [Sepia].
Focus Bracketing
Choose this option to automatically vary focus by a selected amount over a series of five photographs.
1 2 3 4 5 6 7

Press the ADJ./OK button " to select [Auto Bracket] and press the button $. Press the button !" to select [FOCUS-BKT] and press the button $. Press the ADJ./OK button #$ to set the interval of the focus position. Press the ADJ./OK button.
4 Shooting Menu

The camera focuses according to the [Focus] setting.
Press the shutter release button all the way down.

The camera takes 5 consecutive pictures based on the focus position in Step 6.
FAR
Recording
NEAR
115
Note --------------------------------------------------------------------------------------------- When [Focus] is set to [MF], the first picture is taken at the set focus position without being measured. [White Balance] functions according to the [Auto] setting even if it is set to [Multi-P AUTO]. Photographs are taken and recorded in the following order: Focus position Shooting order Recording order Fore 2 1 3 2 Center * 1 3 4 4 Back 5 5
*Focus set using the option currently selected for [Focus] (G P.103).
4 Shooting Menu
116
Long Time Exposure

You can select [1 second], [2 seconds], [4 seconds], or [8 seconds] for time exposure. By using long time exposure, you can capture the movement of moving subjects such as the trail of fireworks and car lights when shooting a night scene.
1 2 3 4

Press the ADJ./OK button " to select [Time Exposure] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
1 Sec
4 Shooting Menu
Note --------------------------------------------------------------------------------------------- When using long time exposure, the shutter speed may slow down and images may be blurred. Hold the camera steady by using a tripod when shooting. The camera shake correction function cannot be used when using long time exposure. If long time exposure is set while the camera shake correction function is turned on, E changes to F. While shooting with long time exposure, the picture display turns off. This function is not available for bracket shooting, multi-target AF, dynamic range double-shot, easy shooting mode, or continuous mode. Long time-exposures are processed to reduce noise. The time required for processing is roughly equivalent to the exposure time. The maximum ISO sensitivity for long time-exposures is ISO 400. If the value currently selected by the user is between ISO 800 and ISO 1600, the camera will automatically set ISO sensitivity to ISO 400 (GP.128).
117
Shooting Several Pictures with the Custom Self-Timer

Set the shooting interval and the number of pictures as indicated below when you want to shoot several pictures with the self-timer.
Available Setting Pictures Interval Description Set this between 1 and 10 pictures. The default setting is [2 Pics]. Set this between 5 and 10 seconds. The default setting is [5 Sec.].
1 2 3

Press the ADJ./OK button " to select [Custom SelfTimer] and press the button $.
The setting screen appears.
4 Shooting Menu
Press the button #$ to select [Pictures] and [Interval], and press the button !" to make the settings. Press the ADJ./OK button.
Note ---------------------------------------------------------------------------------------------After setting [Custom Self-Timer], with the camera ready to shoot, press the t (SelfTimer) button and change the self-timer setting to [Custom]. For information on how to shoot with this function, see P.45.
118
Shooting Pictures Automatically at Set Intervals

You can set the camera to automatically take pictures at fixed intervals. You can set the shooting interval from 5 seconds to 1 hour in increments of 5 seconds.
1 2

Press the ADJ./OK button " to select [Interval Shooting] and press the button $.
Press the button !" to set the hours.

To cancel interval shooting, press the DISP. button to return to the shooting menu.
Shooting Menu
Press the button $ to move to the minutes setting, then press the button !" to set the minutes.
You can press and hold the button !" to quickly raise or lower the minute setting.
5 6 7
Press the button $ to move to the seconds setting, then press the button !" to set the seconds. Press the ADJ./OK button.
[Interval] appears on the screen.
Interval

A picture is taken every time the fixed interval elapses.
Stop
To stop shooting, press the MENU button.
119
Caution----------------------------------------------------------------------------------------- The interval shooting setting is cleared when the camera is turned off. The time until the next picture can be taken according to the shooting menu setting may be longer than the time set for interval shooting. In this case, the shooting interval becomes longer than the set time.
Note --------------------------------------------------------------------------------------------- Interval shooting is not available when [Focus] is set to [Multi-trgt AF]. Depending on the remaining battery level, the battery may become depleted during movie shooting. Use of a battery with adequate remaining power is recommended. If you press the shutter release button during interval shooting, the camera shoots as usual. However, the interval shooting setting is unaffected. After shooting, once the time specified in interval shooting elapses, the next shot is taken. A high speed memory card or a SD memory card with sufficient memory is recommended. When Interval is set, the self-timer setting is disabled.
4 Shooting Menu
120
Camera Shake Correction

You can prevent camera shake by turning on the camera shake correction function. At the time of purchase, the camera shake correction function is turned on.
1 2

Press the ADJ./OK button " to select [Camera Shake Correction] and press the button $. Press the button !" to select [On]. Press the ADJ./OK button.
3 4
4 Shooting Menu
Caution----------------------------------------------------------------------------------------- The camera shake correction function is not available for movie mode, continuous mode, multi-target AF and long time exposure. If multi-target AF, or long time exposure is set while the camera shake correction function is turned on, E changes to F. E disappears when the mode dial is set to 3 or R. The camera shake correction function cannot prevent movement of the shooting subject (caused by wind, etc.). Effects of the camera shake correction function vary depending on the surroundings.
Note ---------------------------------------------------------------------------------------------The J symbol appears when camera shake is likely to occur. (GP.33)
121
Limiting the Shutter Speed

The maximum shutter speed can be limited to the following: 1/8 second, 1/4 second, and 1/2 second. When this function is set to [Off], the maximum shutter speed varies depending on the ISO setting.
1 2 3
4 Shooting Menu

Press the ADJ./OK button " to select [Slow Shutter Limit] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- When time exposure is set, priority is given to time exposure. When scene mode is set to [Nightscape] or [Night. Port.], the maximum shutter speed for [Nightscape] or [Night. Port.] is given priority. When the flash is set to [Flash Synchro.], the longest shutter speed is one second. When using the slow shutter limit, the light quantity may be insufficient depending on the brightness of the subject, resulting in a dark image. In this case, try the following: Selecting a greater slow shutter limit. Raising the ISO setting. (GP.128) Using the flash. (GP.43)
122
Imprinting the Date on Images

You can insert the date (YY/MM/DD) or the date and time (YY/MM/ DD hh:mm) at the lower right of a still image.
1 2 3 4

Press the ADJ./OK button " to select [Date Imprint] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
4 Shooting Menu
Note --------------------------------------------------------------------------------------------- Make the date and time settings in advance. (GP.194) [Date Imprint] cannot be used with movies. The date imprinted in an image cannot be deleted.
123
Exposure Compensation
The exposure setting enables you to select the brightness level for your picture. Normally, if your subject is centered, backlight compensation is automatically activated, and you can shoot with the correct exposure. In the following cases, or when you intentionally want to change the exposure, you can adjust the exposure setting. Exposure can be specified in the range from -2.0 to +2.0. Setting the level higher (+) makes the picture brighter and lower (-) makes the picture darker. For backlighting
When the background is particularly bright, the subject will appear dark (underexposed). In this case, set the exposure level higher (+).
When your subject is whitish 4 Shooting Menu

The entire picture will turn out dark (underexposed). Set the exposure level higher (+).
When your subject is darkish

The entire picture will turn out bright (overexposed). Set the exposure level lower (-). The same happens when you take a photo of a subject in a spotlight. To change the setting, use the shooting menu or the ADJ./OK button. This section explains easy ways to change the setting with the ADJ./OK button. To use the shooting menu, see Using the Menu (GP.100).
1 2 3 4
Press the ADJ./OK button in shooting mode. Press the ADJ./OK button #$ until the exposure compensation bar appears. Press the button !" to set the exposure value.
You can also press the shutter release button to take a picture.

124
Note ---------------------------------------------------------------------------------------------If the subject is very bright or very dark, [!AE] will be displayed and exposure compensation will not be available.
4 Shooting Menu
125
White Balance
Adjust the white balance so that a white subject will appear white. At purchase, the white balance mode is set to [Multi-P AUTO]. Change the setting in situations where the white balance is difficult to adjust effectively, such as when shooting an object of a single color or when shooting under multiple light sources. White Balance Modes
Symbol AUTO Mode Auto Multi-P AUTO Description Adjusts the white balance automatically. The camera automatically selects the optimal white balance according to the conditions of sun and shade or the flash illumination range. Outdoors Select this when shooting outdoors (sunny) and white balance fails to adjust properly. Cloudy Select this when shooting in cloudy weather or shade and the white balance fails to adjust properly. Incandescent Select this when shooting under incandescent light and white Lamp balance fails to adjust properly. Incandescent Select this when shooting under incandescent light (more Lamp 2 reddish, compared with [Incandescent Lamp]). Fluorescent Lamp Select this when shooting under fluorescent light and white balance fails to adjust properly. Manual Settings Adjust the white balance manually. (GP.127)
4 Shooting Menu
1 2
Press the ADJ./OK button in shooting mode. Press the ADJ./OK button #$ until the white balance menu appears. Press the button !" to select a setting other than [M].
You can also press the shutter release button to take a picture.
3 4

126
Caution----------------------------------------------------------------------------------------- White balance is not available when [Black & White] or [Sepia] is selected for [Image Settings] or when [Portrait], [High Contrast B&W] or [Text Mode] is selected in scene mode. [Multi-P AUTO] is not available in continuous mode and movie mode.
Note --------------------------------------------------------------------------------------------- The white balance may not be adjusted correctly for a subject that is mostly dark. In this case, add something white to the subject. When shooting with the flash, the white balance may not be adjusted correctly if [AUTO] is not selected. In this case, switch to [AUTO] to shoot with the flash.
Manual Settings
1 2 3 4
Press the ADJ./OK button in shooting mode. Press the ADJ./OK button #$ until the white balance menu appears. Press the button !" to select [M]. Point the camera at a piece of paper or something white under the lighting conditions for your picture. Press the DISP. button.
The white balance is set.
4 Shooting Menu
5 6

The symbol appears on the screen. The screen is displayed with the white balance set in Step 5. If the result is not as expected, repeat the steps to change the settings as many times as required.
Note ---------------------------------------------------------------------------------------------To cancel [Manual Settings], select a setting other than [M] in Step 3.
127
ISO Sensitivity
ISO sensitivity indicates how sensitive film is to light. A greater value means higher sensitivity. High sensitivity is suitable for shooting an object in a dark place or a fast-moving object while minimizing blurring. You can select from the following ISO settings: Auto, Auto-Hi, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, and ISO 1600. When ISO setting is set to [Auto], the camera automatically changes the sensitivity according to the distance, brightness, zoom, macro settings, and picture quality/size. Usually, use the camera in the [Auto] mode. When the ISO setting is set to [Auto-Hi] (auto high sensitivity), the sensitivity is automatically set according to the shooting conditions but a higher upper limit than in [Auto] can be set. When shooting a dark subject, the shutter speed set in [Auto-Hi] is faster than in [Auto], which may reduce camera shake or blurring of the subject. The maximum ISO setting for [Auto-Hi] is specified in the setup menu. (GP.178) If you do not want to allow the camera to change the ISO sensitivity, select an ISO setting other than [Auto] or [Auto-Hi].
4 Shooting Menu
1 2 3 4
Press the ADJ./OK button in shooting mode. Press the ADJ./OK button #$ until the ISO setting menu appears. Press the button !" to select the setting. Press the ADJ./OK button.
128
Note --------------------------------------------------------------------------------------------- When the ISO setting is set to [Auto], the maximum sensitivity is equivalent to ISO 800 if the flash is used. When the ISO setting is [Auto] and the flash is not fired, the ISO setting is between 80 and 200. Images shot with a higher sensitivity may appear grainy. When the ISO sensitivity is set to [Auto] or [Auto-Hi], the ISO sensitivity that displays when half-pressing the shutter release button may differ from the actual ISO sensitivity in some cases (when using the flash, etc.).
4 Shooting Menu
129
Restoring the Shooting Menu Settings to their Defaults

To return the shooting menu settings to their defaults, follow the steps below.
1 2

Press the ADJ./OK button " to select [Restore Defaults] and press the button $.
A confirmation message appears.
3
4 Shooting Menu
Make sure that [Yes] is selected, and then press the ADJ./OK button.
The display indicates the camera is restoring the initial settings. Once it is finished, the display returns to the shooting mode screen.
Note ---------------------------------------------------------------------------------------------For a list of functions whose settings are saved when the camera is turned off, see Appendices. (GP.234)
130
5 Playback Functions
Instructions in this manual to Press the ADJ./OK button !"#$ indicate that you should press the ADJ./OK button in the up, down, left or right direction. Instructions to Press the ADJ./OK button indicate that you should press directly down on the button.
Playing Back Movies

To play back movies, follow the steps below.
1 2

The last movie shot is displayed. The first frame of the movie is displayed as a still image.
Press the ADJ./OK button !"#$ to select the movie you want to view.
Press the button $ to display the next file. Press the button # to display the Start previous file. Press the button ! to display the file 10 frames forward. Press the button " to display the file 10 frames backward.

Playback begins. The elapsed playback indicator or the elapsed time is displayed on the screen. Fast Forward Rewind Pause/Playback Slow Playback Slow Rewind Next Frame Previous Frame Volume Adjustment Turn the zoom lever toward z during playback. Turn the zoom lever toward Z during playback. Press the ADJ./OK button. Turn and hold the zoom lever toward z during pause. Turn and hold the zoom lever toward Z during pause. Turn the zoom lever toward z during pause. Turn the zoom lever toward Z during pause. Press the ADJ./OK button !" during playback.
131
Playing Back MP Files

When you shoot one still image with M-Cont Plus, Speed Cont, or Multi-trgt AF, the image is recorded as one MP file. Use the following method to play back MP files. Note --------------------------------------------------------------------------------------------- Images shot in normal continuous mode can be played back in the same way as normal still images. The focus position is displayed for multi-target AF shooting.
1 2
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the MP file you want to play back.
The MP file is displayed with the S symbol.
The display changes as follows.

Display for Step 2
Press the DISP. button to change between Normal and No Display. The images cannot be enlarged even if the zoom lever is turned toward 8 (Enlarged View). The images are displayed in thumbnail view. The other operations are the same as those for normal still images.
8
ADJ./OK
Thumbnail view
The MP file images are displayed in thumbnail view. Press the ADJ./OK button !"#$ to select a frame. The DISP. button is disabled.
8
ADJ./OK
132
Single frame view

This displays the frame selected on the thumbnail view. Turn the zoom lever toward 8 (Enlarged View) to display enlarged view.
ADJ./OK
Slide Show
Images are displayed automatically in the order they were consecutively shot, starting with the displayed frame.
Stop
The operations during slide show are shown below. Pause/Playback Fast Forward Rewind Slow Playback Slow Rewind Next Frame Previous Frame First Frame Last Frame Press the ADJ./OK button. Turn and hold the zoom lever toward z during playback. Turn and hold the zoom lever toward Z during playback. Turn and hold the zoom lever toward z during pause. Turn and hold the zoom lever toward Z during pause. Turn the zoom lever toward z during pause. Turn the zoom lever toward Z during pause. Press the ADJ./OK button #. Press the ADJ./OK button $.
To play back files other than MP files, return to Step 2 and press the ADJ./OK button !"#$.
Caution----------------------------------------------------------------------------------------- The [DPOF], [Trim], [Resize], [Skew Correction] (playback mode), [Level Compensation], and [White Balance Compensation] functions are not available for MP files. [Flag Function Setting] and [Protect] cannot be set for individual frames in an MP file. If [Flag Function Setting] or [Protect] is set when the thumbnail view or single image view is displayed, the setting will be applied to the MP file instead of an individual frame. The individual images in a MP file can not be deleted separately.
133
Exporting MP Files
You can extract specific frames from an MP file shot using M-Cont Plus, Speed Cont, or Multi-trgt AF and save each frame as an individual still image. Note --------------------------------------------------------------------------------------------- The images are saved in the same sizes used for shooting. The original files will be retained after extraction. The focus positions for images shot using multi-target AF will not be displayed on extracted images.
1 2
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the MP file you want to export.
The MP file is displayed with the S symbol. To export multiple frames, you can also turn the zoom lever toward 8 (Enlarged View) to display thumbnail view, and then go to Step 3.
3 4

The playback menu appears.
Press the ADJ./OK button " to select [Export Still Images] and then press the button $.
134
Selecting One Frame
5 6
Press the button !" to select [1 Frame].

Press the button #$ to select the frame.
Specifying Multiple Frames Separately
Press the button !" to select [Sel Mult] and then press the ADJ./OK button.
6 7 8 9 10
Press the button !" to select [Sel. Indiv.] and then press the ADJ./OK button. Press the button !"#$ to select the frame and then press the ADJ./OK button.
Press the MENU button to switch to the display for specifying a range of frames. See Step 7 and beyond on P.136.
Repeat Step 7 to select all the frames.

If you selected a frame by mistake, you can deselect it by selecting the frame and pressing the ADJ./OK button.
Press the Fn (Function) button. Press the ADJ./OK button #$ to select [Yes] and then press the ADJ./OK button.
135
Specifying a Range of Multiple Frames
6 7
Press the button !" to select [Sel. Range] and then press the ADJ./OK button. Press the button !"#$ to select the starting point for the range of frames you want to specify and press the ADJ./OK button.
If you make a mistake when selecting the starting point for the range of frames, press the ADJ./OK button to return to the screen for selecting the starting point. Press the MENU button to switch to the display for specifying frames separately. See Step 7 and beyond on P.135.
Press the button !"#$ to select the ending point for the range of frames you want to specify and press the ADJ./OK button. Repeat Steps 7 and 8 to specify all ranges. Press the Fn (Function) button.
Export Still Images
9 10 11
Start
Cancel
Press the ADJ./OK button #$ to select [Yes] and then press the ADJ./OK button.
136
Selecting All Frames
5 6
Press the button !" to select [All Frames] and press the button $. Press the button #$ to select [Yes] and then press the ADJ./ OK button.
137
6 Playback Menu
About the Playback Menu

Press the MENU button in playback mode to display the playback menu. The playback menu allows you to make the settings for the following functions.
Setting Flag Function Setting Flag Function Display Export Still Images Resize Trim Level Compensation White Balance Compensation Skew Correction Protect Slide Show Copy to Card from Internal Memory DPOF Recover File Options Refer to P.140 P.142 P.134 P.143 P.144 P.147 P.150 P.152 P.154 P.157 P.158 P.159 P.162
Cancel, 1 Frame, Sel Mult, All Frames 1280, 640 Auto, Manual
6 Playback Menu
Cancel, 1 File, Sel Mult, Select All, Cancel All
Cancel, 1 File, Select All, Cancel All
The setup menu can be accessed from within the playback menu. (GP.165)
Note ----------------------------------------------------------------------------------------------
138
Using the Menu
1 2
Press the 6 (Playback) button to select the playback mode. Press the MENU button.
Press the ADJ./OK button !" to select the desired item.

If the DISP. button is pressed at this point, the cursor moves to the playback menu tab. Press the ADJ./OK button " at the bottom item to display the next screen.

The screen for the selected menu item appears.
6 Playback Menu
139
Saving Images You Want to Quickly Display (Flag Function Setting)

You can set useful image files, such as a train time table or a map, to [Flag Function Setting], and then press the Fn (Function) button during playback to easily display these files whenever you like. Up to 20 files can be saved with [Flag Function Setting].
Setting/Canceling One File at a Time
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to set or cancel. Press the MENU button.
Check that [Flag Function Setting] is selected and press the ADJ./OK button $.
The [Flag Function Setting] screen appears.
6 Playback Menu
Make sure that [Set] is selected to save a file or [Cancel] is selected to cancel a file, and then press the ADJ./OK button.
When a file is set, the symbol appears on the screen. If 20 files have already been set, no more files can be set.
Note ---------------------------------------------------------------------------------------------If an enlarged still image is set, the magnification ratio and magnified area are saved and the enlarged image can be displayed as is.
140
Setting/Canceling Multiple Files at One Time
1 2 3 4 5
Press the 6 (Playback) button. Turn the zoom lever toward 9 (Thumbnail View).
Press the ADJ./OK button !"#$ to select the first file you want to set or cancel. Press the MENU button.
Check that [Flag Function Setting] is selected and press the ADJ./OK button $.
When a file is set, the symbol appears on the file. If 20 files have already been set, no more files can be set.
Flag Function Setting
Press the button !"#$ to select the next file you want to set or cancel and press the ADJ./OK button.
Finish
Sel/Cancel
7 8
Repeat Step 6 to select all the files you want to set or cancel.
If you selected a file by mistake, select the file and press the ADJ./OK button again.
6 Playback Menu
Press the DISP. button.

Caution----------------------------------------------------------------------------------------- If the name of the file set to [Flag Function Setting] is changed using a computer, the file is canceled from [Flag Function Setting]. When the contents of the internal memory are copied to an SD memory card, the files set to [Flag Function Setting] in the internal memory are canceled. When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO] folder and CLIP.CLI file are created on the SD memory card. If these are deleted, the corresponding file is canceled from [Flag Function Setting]. If the name of an image file is changed using a computer, the file may not be able to be set to [Flag Function Setting]. Only images taken using this camera can be set to [Flag Function Setting].
141
Displaying an Image Set to Flag Function Setting (Flag Function Display)
1 2
Press the 6 (Playback) button. Press the Fn (Function) button, or select [Flag Function Display] from the playback menu, and press the ADJ./OK button $.
The file set to [Flag Function Setting] with the smallest file number is displayed. You can use the zoom lever to change the size of still images. You can also press the ADJ./OK button !"#$ to move the displayed image. Changes to the magnification ratio and magnified area are saved, and the image is displayed as is the next time. You can press the shutter release button or the 6 button to switch to shooting mode. If no files are set to [Flag Function Setting], a message appears and you are returned to the playback menu.
6 Playback Menu
Press the Fn button as required.

If multiple files are set to [Flag Function Setting], pressing the Fn button displays the image with the smallest file number.
Note ---------------------------------------------------------------------------------------------When a file set to [Flag Function Setting] is displayed at normal magnification, pressing the ADJ./OK button !"#$ displays the previous or next image.
142
Resizing Images
You can reduce the image size of a shot still image to create a new file with a different image size.
Original Resized F3456/N3456/F3:2/F1:1/N3072/N2592/N2048/N1728 N1280 N1280 N640 N640
Caution-----------------------------------------------------------------------------------------You can resize only still images. Movies or MP files cannot be resized.
Note --------------------------------------------------------------------------------------------- The ratio of width to height of [F3:2] images is 3:2. When an image of this type is resized, it is reduced to a 4:3 image with black borders at the top and bottom. In [F1:1] images, the height and width are the same. When an image of this type is resized, it is reduced to a 4:3 image with black borders added on the left and right sides. You can also change the image size during shooting. (GP.101)
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file with the image size you want to change. Press the MENU button.
6 Playback Menu
Press the ADJ./OK button " to select [Resize] and press the button $.
5 6
Press the button !" to select [1280] or [640]. Press the ADJ./OK button.
The display indicates that the image is being resized, and then the resized image is recorded. The original image remains unchanged.
143
Trimming Images
This function allows you to trim a still image you have shot and then save it as a separate file.
1 2 3 4 5
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to trim. Press the MENU button.
Press the ADJ./OK button " to select [Trim] and press the button $.
The [Trim] screen appears. To cancel trimming, press the DISP. button.
Turn the zoom lever toward 8 or 9 to set the size of the trimming frame.
Pressing the Fn (Function) button at this point displays the screen for describing the operating procedure. Pressing the Fn button again returns the display to the previous screen. Press the D button to choose between aspect ratios of 4 : 3 and 1 : 1.
6 Playback Menu
6 7
Press the ADJ./OK button !"#$ to set the position of the trimming frame. Press the ADJ./OK button.
The trimmed image is recorded. The original image remains unchanged.
Caution----------------------------------------------------------------------------------------- You can only trim still images shot using this camera. You cannot trim movies or MP files. With the exception of images with an aspect ratio of 1 : 1 and a size, after cropping, of 2592 x 2592, images can be cropped repeatedly. The compression applied when a copy is saved results in a drop in image quality.
144
Note --------------------------------------------------------------------------------------------- If an image is trimmed, the compression ratio changes to Normal. The available settings for the trimming frame size differ depending on the original image size. Each time you turn the zoom lever toward 8, the trimming frame decreases in size by one level. You can decrease the frame size through 13 levels down to the smallest size. The size of the image after cropping depends on the size of the original and the size of the crop (the first crop shown in the trimming display is the second largest crop; to display the largest crop, select 9 with the zoom lever). Aspect ratio 4:3 Original image size Trimming level
1 2, 3 4, 5 6 to 9 10 to 13 1 2 3 to 5 6 to 9 10 to 13 1 2 to 4 5 to 8 9 to 12 1, 2 3, 4 5 to 8 9 to 12 1 2, 3 4 to 7 8 to 12 1, 2 3 to 6 7 to 10 1 2 to 5 6 to 9 1 to 3 4 to 8 1 to 4
Trimmed image size

3072 2304 2592 1944 2048 1536 1280 960 640 480 3072 2304 2592 1944 2048 1536 1280 960 640 480 2592 1944 2048 1536 1280 960 640 480 2592 1944 2048 1536 1280 960 640 480 2592 1944 2048 1536 1280 960 640 480 2048 1536 1280 960 640 480 1728 1296 1280 960 640 480 1280 960 640 480 640 480
3456 2592
3456 2304
2592 2592
6 Playback Menu
3072 2304
2592 1944
2048 1536
1728 1296 1280 960 640 480
145
Aspect ratio 1:1 Original image size Trimming level

1 2 3 to 5 6 to 9 10 to 13 1, 2 3, 4 5 to 9 10 to 12 1, 2 3 to 5 6 to 9 10 to 12 1, 2 3, 4 5 to 8 9 to 12 1 to 3 4 to 7 8 to 11 1, 2 3 to 6 7 to 10 1 to 4 5 to 8 1 to 3 4 to 8 1 to 4
Trimmed image size

2592 2592 2304 2304 1536 1536 960 960 480 480 2304 2304 1536 1536 960 960 480 480 2592 2592 1536 1536 960 960 480 480 2304 2304 1536 1536 960 960 480 480 1536 1536 960 960 480 480 1536 1536 960 960 480 480 960 960 480 480 960 960 480 480 480 480
3456 2592
3456 2304
2592 2592
3072 2304
2592 1944
6 Playback Menu
2048 1536 1728 1296 1280 960 640 480
146
Correcting the Image Brightness and Contrast

You can use either [Auto] or [Manual] mode to correct the brightness and contrast in still images you have shot and then record the corrected images. [Manual] mode allows you to correct the image by adjusting the histogram. Note ---------------------------------------------------------------------------------------------See P.60 for more information on the histogram display.
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to correct. Press the MENU button.
Press the ADJ./OK button " to select [Level Compensation] and press the button $.
6 Playback Menu
Correcting Images Automatically
Press the ADJ./OK button !" to select [Auto] and press the button $.
The original image appears at the upper left of the screen and the corrected image is shown on the right. If you select a file that cannot use level compensation, an error message appears and you are returned to the playback menu. To cancel level compensation, press the DISP. button.
Level Compensation [Auto]
Cancel
Ok

Messages appear during the correction process, and then the corrected image is recorded. The original image remains unchanged.
147
Correcting Images Manually
Press the ADJ./OK button !" to select [Manual] and press the button $.
The original image appears at the upper left of the screen, the histogram is at the lower left, and the corrected image is shown on the right. If you select a file that cannot use level compensation, an error message appears and you are returned to the playback menu. To cancel level compensation, press the DISP. button.
Press the MENU button to switch between points on the histogram.
Level Compensation [Manual]
Help
Chng. Points A histogram shows the number of pixels on the vertical axis and the brightness on the horizontal axis, Cancel Ok ranging from shadows (dark areas) on the left through midtones to highlights Points (bright areas) on the right. Each time you press the MENU button, the selected point switches from the left point, to the middle point and then to the right point. Pressing the Fn (Function) button at this point displays the screen for describing the operating procedure. Pressing the Fn button again returns the display to the previous screen.
Press the ADJ./OK button #$ to correct the image by adjusting the location of the selected point.
Moving the left or right point moves the middle point also.
148
Playback Menu
Sample correction methods ------------------------------------------------------------ Example 1) To adjust the overall image brightness: Select the middle point and move it to the left to brighten the entire image. Selecting the middle point and moving it to the right darkens the entire image.
Example 2) To correct an overexposed or underexposed image: If the image in overexposed, move the left point to the right so that it is aligned with the left end of the histogram peaks. If the image in underexposed, move the right point to the left so that it is aligned with the right end of the histogram peaks. You can then adjust the overall image brightness by moving the middle point left or right. Example 3) To boost the contrast in an image: If an image is lacking in contrast, the histogram peaks are concentrated toward to the center. By aligning the left and right points with the respective ends of the histogram peaks, you can create an image with clearly defined bright and dark areas. You can then adjust the overall image brightness by moving the middle point left or right.
Overexposed image
6 Playback Menu

Caution----------------------------------------------------------------------------------------- You can only use level compensation for still images shot using this camera. You cannot use level compensation for movies or MP files. This function may not have any effect for images shot using [Text Mode] in scene mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia]. While you can use level compensation repeatedly, the image is recompressed each time and there will be some decline in image quality.
149
Correcting the White Balance

This function allows you to correct the green, magenta, blue and amber color tones in still images you have taken and then record the corrected images.
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to correct. Press the MENU button.
Press the ADJ./OK button " to select [White Balance Compensation] and press the button $.
The original image appears at the upper left of the screen, the white balance compensation map is at the lower left, and the corrected image is shown on the right. If you select a file that cannot use white balance compensation, an error message appears and you are returned to the playback menu.
Press the button !"#$ to move the point around the white balance compensation map and adjust the color tones.
150
Playback Menu
White Balance Compensation
Help
Press the button !"#$ to move the Cancel Ok point around the white balance compensation map. [G] denotes green, [A] denotes amber, [M] denotes magenta and [B] denotes blue, and the color tones change toward the respective colors depending on the location of the point. To cancel white balance compensation, press the DISP. button. Press the D button to reset the color tone while correcting. Pressing the Fn (Function) button at this point displays the screen for describing the operating procedure. Pressing the Fn button again returns the display to the previous screen.

Caution----------------------------------------------------------------------------------------- You can only use white balance compensation for still images shot using this camera. You cannot correct the white balance for movies or MP files. This function may not have any effect for images shot using [Text Mode] in scene mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia]. While you can use white balance compensation repeatedly, the image is recompressed each time and there will be some decline in image quality.
6 Playback Menu
151
Correcting Skewed Images

You can straighten rectangular objects, such as a message board or business card, shot at an angle, to make them look as if they were shot squarely.
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the file you want to straighten. Press the MENU button.
Press the ADJ./OK button " to select [Skew Correction] and press the button $.
The display indicates that the image is being processed, and then the area recognized as the correction range is displayed with an orange frame. Up to five areas can be recognized. If the target area cannot be detected, an error message appears. The original image remains unchanged. To select another correction area, move the orange frame to the target area by pressing the ADJ./OK button $. To cancel skew correction, press the ADJ./OK button !. Even if you cancel skew correction, the original image remains unchanged.
6 Playback Menu

The display indicates that the image is being corrected, and then the corrected image is recorded. The original image remains unchanged.
Caution----------------------------------------------------------------------------------------- You can use skew correction for still images shot with this camera. You cannot use skew correction for movies or MP files.
152
Note --------------------------------------------------------------------------------------------- The image size does not change for skew corrected images. If the image size is large, skew correction will take time. Resize the image (GP.143) before performing skew correction to speed up the process. The following table shows the approximate time required for skew correction. Image Size 3456 2592 3072 2304 2592 1944 2048 1536 1728 1296 1280 960 640 480 Correction time Approx. 20 seconds Approx. 15 seconds Approx. 12 seconds Approx. 8 seconds Approx. 7 seconds Approx. 6 seconds Approx. 2 seconds
When scene mode is set to [Skew Correct Mode], you can shoot an image and then immediately correct any skew in the image. (GP.75)
6 Playback Menu
153
Preventing the Deletion of Files

You can protect files from being accidentally deleted. Caution-----------------------------------------------------------------------------------------Protected files cannot be deleted normally. However, they will be deleted if you format the memory where the files are stored.
1 2

Press the ADJ./OK button !"#$ to display the file you want to protect or unprotect.
To protect or unprotect multiple frames, you can also turn the zoom lever toward 9 (Thumbnail View) to display thumbnail view, and then go to Step 3.
3 4

Press the ADJ./OK button " to select [Protect] and press the button $.
6 Playback Menu
Protecting/Unprotecting a File
5 6
Press the button !" to select [1 File]. Press the button #$ to select the file. Press the ADJ./OK button.
154
Protecting Multiple Files Separately
6 7
Press the button !" to select [Sel. Indiv.] and then press the ADJ./OK button. Press the ADJ./OK button !"#$ to select the frames and then press the ADJ./OK button.
Press the MENU button to switch to the display for specifying a range of files. See Step 7 and beyond for Specifying a Range of Multiple Files.
8 9 5
Repeat Step 7 to select all the files.

If you selected a file by mistake, you can deselect it by selecting the file and pressing the ADJ./OK button.
Press the Fn (Function) button.

6 Playback Menu
Specifying a Range of Multiple Files
Press the button !" to select [Sel. Range], and then press the ADJ./OK button.
155
Press the button !"#$ to select the starting point for the range of files you want to specify and press the ADJ./OK button.
If you make a mistake when selecting the starting point for the range of files, press the DISP. button to return to the screen for selecting the starting point. Press the MENU button to switch to the display for specifying files separately. See Step 7 and beyond for Protecting Multiple Files Separately.
Press the button !"#$ to select the ending point for the range of files you want to specify and press the ADJ./OK button. Repeat Steps 7 and 8 to specify all ranges. Press the Fn (Function) button.
9 10 5
6 Playback Menu
Protecting/Unprotecting All Files
Press the button !" to select [Select All] or [Cancel All] and press the ADJ./OK button $. Press the ADJ./OK button #$ to select [Yes] and then press the ADJ./OK button.
156
Displaying Slide Shows

You can display the recorded still images and movie files sequentially on the screen. This is called a slide show. To view a slide show, follow the steps below.
1 2 3


Press the ADJ./OK button " to select [Slide Show] and press the button $.
The slide show starts and files are played back in order. If you want to stop the slide show in progress, press any button on the camera. The slide show repeats itself until stopped.
Note --------------------------------------------------------------------------------------------- Each still image is displayed for three seconds. For movies and MP files, all the images you shot are played back.
6 Playback Menu
157
Copying the Contents of the Internal Memory to an SD Memory Card

You can copy all movies, still images, and sound data stored in the internal memory onto an SD memory card at once.
1 2 3 4 5 6
Turn the camera off. Insert an SD memory card. Turn the camera on. Press the 6 (Playback) button. Press the MENU button.
Press the ADJ./OK button " to select [Copy to Card from Internal Memory] and press the button $.
The display indicates copying is in progress; once finished, the display returns to the playback screen.
6 Playback Menu
Note --------------------------------------------------------------------------------------------- If the capacity of the SD memory card to which you are copying is insufficient, a message will be displayed indicating there is not enough capacity. To copy only the number of shots that will fit into the available capacity, select [Yes] and then press the ADJ./OK button. To cancel copying, select [No] and then press the ADJ./OK button. It is not possible to copy the contents of an SD memory card to the internal memory. When the contents of the internal memory are copied to an SD memory card, the files saved to [Flag Function Setting] in the internal memory are canceled.
158
Using a Printing Service (DPOF)

The still images recorded on an SD memory card can be printed out if you take them to a store that offers a digital camera print service. To use a print service, you must make print settings on your camera. These settings are called Digital Print Order Format (DPOF) settings. The DPOF setting specifies one print per still image. You can also select multiple images for the DPOF setting and specify the number of copies to print.
Setting/Canceling DPOF for a File
1 2 3 4
Press the 6 (Playback) button. Press the ADJ./OK button !"#$ to display the still image for which you want to make the DPOF setting. Press the MENU button.
Press the ADJ./OK button " to select [DPOF] and press the button $.
6 Playback Menu
5 6
Press the button !" to select [1 File].

Press the button #$ to select a file.
159
Setting/Canceling DPOF for All Files
1 2 3 4 5
Press the 6 (Playback) button. Press the MENU button.

Press the ADJ./OK button " to select [DPOF] and press the button $. Press the button !" to select [Select All] or [Cancel All]. Press the ADJ./OK button.
Once the DPOF setting is made, the DPOF symbol appears on the screen.
6 Playback Menu
Setting DPOF for Multiple Files

To make the DPOF settings for selected still images all at once, follow the steps below.
1 2 3 4
Press the 6 (Playback) button. Turn the zoom lever toward 9 (Thumbnail View).
The files are displayed in thumbnail view.
Press the ADJ./OK button !"#$ to select the first still image for which you want to make the DPOF setting. Press the MENU button.
160
5 6
Press the ADJ./OK button " to select [DPOF] and press the button $. Press the button !" to set the number of copies to print.
Press the button ! to increase the number of copies, or press the button " to decrease the number of copies.
7 8 9 10
Press the button #$ to select the next still image for which you want to make the DPOF setting. Press the button !" to set the number of copies to print.
Repeat Steps 7 and 8 to select all the still images for which you want to make the DPOF setting. Press the ADJ./OK button.
The display indicates that the selected images are being processed; once finished, the display returns to the thumbnail view.
Note --------------------------------------------------------------------------------------------- To remove the DPOF settings for multiple still images, follow the same steps described above to set the number of copies to print to [0] for each image, and then press the ADJ./OK button. You can also cancel the DPOF settings for all still images at once. (GP.160)
6 Playback Menu
161
Restoring Deleted Files

You can restore all deleted files. Deleted files cannot be restored after performing any of the following operations. Turning the camera off Switching from playback mode to shooting mode Using DPOF, Resize, Copy to Card from Internal Memory, Skew Correction, Level Compensation, White Balance Compensation or Trim. Files with DPOF settings are deleted Internal memory or SD memory card is initialized Setting or canceling files for [Flag Function Setting] Changing the magnification ratio or magnified area of files set to [Flag Function Setting] Exporting MP files using [Export Still Images]
1 2 3
6 Playback Menu
Press the 6 (Playback) button. Press the MENU button.

Press the ADJ./OK button " to select [Recover File] and press the button $.
A screen appears to confirm whether to restore all files. If there are no restorable files, a confirmation message appears.
Press the button $ to select [Yes] and then press the ADJ./OK button.
All deleted files are restored.
162
Viewing on a Television
You can view files you have taken on a TV screen. The camera displays everything on the TV screen just as it would on the picture display. To use your television for viewing, connect your camera to the television with the AV cable that came with your camera. To view files on a television, follow the steps below.
Securely connect the AV cable to the Video In terminal on the television.

Connect the white plug of the AV cable to the audio input terminal (white) of the TV unit and the yellow plug to the video input terminal (yellow).
Video input terminal (yellow)
2 3
Make sure that the camera is off. Securely connect the AV cable to the AV output terminal on the camera.
Audio input terminal (white)
6 Playback Menu
4 5
Set the television to Video mode. (Set the input to Video)

For details, see the documentation that came with the television.
Press the POWER button, or press and hold the 6 (Playback) button to turn the camera on.
163
Caution----------------------------------------------------------------------------------------- When the AV cable is connected to the camera, the picture display and the speaker output turn off. Do not force the AV cable into the terminal. Do not apply excessive force with the AV cable connected. When using the AV cable, do not move the camera with the AV cable.
Note --------------------------------------------------------------------------------------------- You can connect the AV cable to the Video In terminal on your video recorder and record what you have shot to a video recorder. Your camera is set to NTSC playback format (used in North America and other countries/regions) for use with television equipment and other audiovisual equipment. If the equipment you want to connect to uses PAL format (used in Europe and elsewhere), then switch your camera to PAL format in the setup menu before connecting. (GP.196)
6 Playback Menu
164
7 Setup Menu
About the Setup Menu

You can change the camera settings by displaying the setup menu from the shooting menu (GP.97) or playback menu (GP.138). The setup menu enables you to set the items listed in the table below.
Setting Format [Card] Format [Internal Memory] LCD Brightness Reg. My Settings Step Zoom Set Fn Button ADJ Button Setting 1*1 ADJ Button Setting 2*2 ADJ Button Setting 3*3 ADJ Button Setting 4*4 ISO Auto-High Settings AF Auxiliary Light Operation Sounds Volume Settings Options [Default Settings] Refer to P.168 P.169 P.170 P.171 P.173 P.174
MY1, MY2 On, [Off] Off, [Macro Target], AE Lock, AF/Cont. AF AF/M-trgt AF, AF/MF, AF/Snap, AT-BKT, WB-BKT, CL-BKT, FOCUS-BKT Off, [Exposure Comp]*1, [White Balance]*2, [ISO]*3, P.176 [Quality]*4, Focus, Image, Expo. Metering, Auto Bracket, Flash Comp. P.178 P.179 P.180 P.181 P.182
7 Setup Menu
[AUTO 400], AUTO 800, AUTO 1600 [On], Off [All], Level Sound, Shutter Sounds (Mute), (Small), [ ] (Medium), (Large) LCD Confirmation Time Off, [0.5 seconds], 1 second, 2 seconds, 3 seconds, Hold Auto Power Off Off, 1 minute, [5 minutes], 30 minutes LCD Auto Dim [On], Off Digital Zoom Image [Normal], Auto Resize Level Setting Off, [Display], Display+Sound, Sound Grid Guide Display Options [ ], , Shooting Info. Display On, [Off] Frame
P.183 P.184 P.185 P.187 P.188 P.189
165
Setting Minimum Distance Auto Rotate Card Sequence No. Date Settings Language/N(*)
Options [Default Settings] [Show], Hide [On], Off On, [Off] , English, Deutsch, Franais, Italiano, Espaol, , , , , NTSC, PAL
Refer to P.190 P.191 P.193 P.194 P.195
Video Out Mode(*)

(*)
P.196
The default setting varies depending on where you purchased the camera.
Note --------------------------------------------------------------------------------------------- In easy shooting mode, the quantity and order of the items in the setup menu are different from other shooting modes. The contents of the settings are the same as other modes. The items that can be set with [Set Fn Button] and [ADJ Button Setting 1/2/3/4] differ depending on the shooting mode. See the corresponding reference page for details.
Using the Menu

In the instructions of this manual, the menu selection is confirmed when you Press the ADJ./ OK button (as in Step 8 below), but you can also confirm the setting and return to the menu screen by pressing the ADJ./OK button #.
1
7 Setup Menu

The shooting menu (or the playback menu) appears.
2 3 4
Press the ADJ./OK button #.

In scene mode or continuous mode, press the ADJ./OK button !"#$ to select the [MODE] tab, and then press the ADJ./OK button " twice. The setup menu appears.
Press the ADJ./OK button ".

The setup menu appears.
166
Press the ADJ./OK button !" to select the desired item.

If the DISP. button is pressed at this point, the display returns to the screen shown in Step 3. Press the ADJ./OK button " at the bottom item to display the next screen.
6 7 8

The menu item settings are displayed.
Press the ADJ./OK button !" to select the setting. Press the ADJ./OK button.
The setup menu disappears and the camera is ready for shooting or playback. The setup menu may appear depending on the setting. In this case, press the MENU button or the ADJ./OK button to return to the shooting or playback screen. Pressing the ADJ./OK button # in Step 8 confirms the setting and the display returns to the screen shown in Step 5.
Note ---------------------------------------------------------------------------------------------For some functions, the setting selection method may differ from what is explained here. For detailed operation, see the explanation of each function.
7 Setup Menu
167
Formatting the SD Memory Card

If the error message [Card Error] is displayed when an SD memory card is loaded into the camera or the card has been used with a computer or other digital camera, you must format the card prior to use with this camera. Formatting is the process of preparing a card so image data can be written on it. Caution-----------------------------------------------------------------------------------------If you format a card that still has images stored on it, the images will be lost.
1 2
Display the setup menu.

Check that [Format [Card]] is selected and press the ADJ./ OK button $.
A screen appears to confirm formatting.
Press the button #$ to select [Yes] and then press the ADJ./ OK button.
Formatting starts. When it is done, the display returns to the setup menu. If no SD memory card is loaded, a message will be displayed. After turning the power off, load an SD memory card and repeat the formatting process again.
7 Setup Menu
Press the MENU button or the ADJ./OK button.

Protecting your images from being deleted---------------------------------------Move the write-protection switch on the SD memory card to LOCK to prevent your still images from being accidentally erased or the card from being formatted (GP.24). If you unlock the card (by returning the switch to its original position), it is once again possible to add and erase images and format the card.
168
Formatting the Internal Memory

If the error message [Format internal memory.] is displayed, you must format the internal memory prior to use. Caution-----------------------------------------------------------------------------------------Formatting the internal memory deletes all of the images recorded in the memory. If you have images in the internal memory that you do not want to delete, copy the images to the SD memory card before formatting the internal memory. (GP.158)
1 2

Press the ADJ./OK button " to select [Format [Internal Memory]] and press the button $.
A screen appears to confirm formatting.
3 4
Press the button #$ to select [Yes] and then press the ADJ./OK button.
Formatting starts. When it is done, the display returns to the setup menu.

7 Setup Menu
169
Adjusting the Picture Display Brightness

To adjust the brightness of the picture display, follow the steps below.
1 2

Press the ADJ./OK button " to select [LCD Brightness] and press the button $.
Press the button !" to adjust the brightness.

Move the slider on the LCD brightness adjustment bar down to make the picture display darker and up to make it brighter. The brightness of the picture display changes as the slider is moved along the bar. To cancel brightness adjustment, press the DISP. button to cancel the setting and return to the shooting menu.
7 Setup Menu
4 5
When you reach the desired brightness, press the ADJ./ OK button.
The display returns to the setup menu.

When [LCD Auto Dim] is set to [On] on the setup menu (GP.184), the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness. The brightness display shows the view through the lens (shooting mode) or the most recently viewed picture (playback mode; if no picture is available for playback, no image will be shown in the brightness display).
Note ----------------------------------------------------------------------------------------------
170
Registering My Settings
The My Settings function allows you to easily shoot with your desired settings. You can register two groups of settings as My Settings. Setting the mode dial to MY1 allows you to shoot with the settings registered in [MY1]. Setting the mode dial to MY2 allows you to shoot with the settings registered in [MY2]. (GP.83) To register the current camera settings as My Settings, follow the steps below.
1 2 3
Change the camera settings to the settings to be registered as My Settings. Display the setup menu.
Press the ADJ./OK button " to select [Reg. My Settings] and press the button $.
A confirmation message appears.
Press the button #$ to select [MY1] or [MY2] and press the ADJ./OK button.
The current camera settings are registered and the display returns to the setup menu. If you do not want to register them, press the DISP. button.
7 Setup Menu
171
Settings Saved in [Reg. My Settings]

Shooting mode (5/3/MY1/MY2/SCENE/Q/R) Picture Quality/Size Focus Pre-AF Focal distance used in Manual Exposure Metering Image Settings Flash Exposure Compensation Dynamic Range Expansion Plus Normal Shooting Auto Bracket CL-BKT FOCUS-BKT WB-BKT Time Exposure Custom Self-Timer Camera Shake Correction Slow Shutter Limit Date Imprint Exposure Compensation White Balance ISO Setting Zoom position Macro Flash mode Scene mode Self-timer DISP. mode Step Zoom Digital Zoom Image Level Setting Grid Guide Display Options Minimum Distance Density Frame Rate
7 Setup Menu
172
Fixing the Focal Length of the Zoom

Step zooming allows you to set the focal length of the zoom so that it stops at eight levels (28, 35, 50, 85, 105, 135, 200, 300 mm*). * Equivalent to that on a 35 mm camera
Available Settings On (Step zooming on) Off (Step zooming off) *Default setting
1 2 3 4

Press the ADJ./OK button " to select [Step Zoom] and press the button $. Press the button !" to select [On]. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- In Macro mode, the step zoom focal lengths are roughly equivalent to 31, 35, 50, 85, 105, 135, 200 and 300 mm on a 35 mm camera. Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] (GP.174) allows you to switch between on and off for step zoom by pressing the Fn button. (GP.73)
7 Setup Menu
173
Fn (Function) Button Settings

When a function is assigned to the Fn button, you can easily switch from one function to another simply by pressing the Fn button. The following functions can be assigned to the Fn button. For information on how to use the Fn button, see the corresponding reference page.
Available Setting Macro Target(*1) AE Lock AF/Cont. AF AF/M-trgt AF AF/MF AF/Snap Step Zoom, AT-BKT, WB-BKT, CL-BKT, FOCUS-BKT
(*1) (*2) (*3)
Description Moves the AF target without moving the camera to shoot close-ups. Locks the exposure. Switches between auto focus(*2) and continuous AF. Switches between auto focus(*3) and multi-target AF. Switches between auto focus(*3) and manual focus. Switches between auto focus(*3) and snap mode. Switches between on and off for each function.
Refer to P.67 P.68 P.69 P.70 P.71 P.72 P.73
Default setting [Multi AF] or [Spot AF] [Multi AF], [Spot AF] or [Continuous AF]
7 Setup Menu
174
Note ---------------------------------------------------------------------------------------------The items that can be set for each shooting mode are shown below.(*1) SCENE(*2) Portrait / Landscape Skew Correct Mode
Macro Target Step Zoom AE Lock AF/Cont. AF AF/M-trgt AF AF/MF AF/Snap AT-BKT WB-BKT CL-BKT FOCUS-BKT
(*1) (*2)
O O O O O O O O O O O
O O O -
O O O O O -
O O O O O O O O O O
O O O O O O O O O
O O O O O O -
O O O O -
Other Modes O O O O -
Zoom Macro
Available Settings
Text Mode
High Sens
Discreet Mode
R Q (*2) 3
O O O O O O O O O O O O O O O O -
The Fn button can not be used for the selected function when [Miniaturize] is selected in scene mode. The functions not marked with a circle (O) can also be assigned to the Fn button, but they will not operate if the button is pressed in scene mode or movie mode.
1 2 3 4

7 Setup Menu
Press the ADJ./OK button " to select [Set Fn Button] and press the button $. Press the button !" to select the settings. Press the ADJ./OK button.
175
ADJ. Button Settings

When functions are assigned to the ADJ./OK button, you can display various shooting setting screens with fewer button operations and without displaying the shooting menu. You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to assign camera functions that can be activated by pressing the ADJ./ OK button. For information on how to use the ADJ. mode, see P.62. The following functions can be assigned to the ADJ./OK button.
Available Settings Off Exposure Comp White Balance ISO Quality Focus Image Expo. Metering Auto Bracket Flash Comp. Density Refer to P.124 P.126 P.128 P.101 P.103 P.109 P.108 P.112 P.111 P.82
*Default setting for [ADJ Button Setting 1] *Default setting for [ADJ Button Setting 2] *Default setting for [ADJ Button Setting 3] *Default setting for [ADJ Button Setting 4]
7 Setup Menu
176
Note --------------------------------------------------------------------------------------------- The items that can be set for each shooting mode are shown below. SCENE Text Mode(*) Discreet Mode Portrait / High Contrast B&W(*) Other Modes(*)
Continuous Mode
Available Settings
EASY(*)
Q 3(*)
M-Cont Plus Speed Cont O O O O O O O O O O O O -
Exposure Comp. White Balance ISO Quality Focus Image Expo. Metering Auto Bracket Flash Comp. Density
(*)
O O O O O O O O O - O
O O O O O O O O O -
O -
O O -
O -
O O O O O O O -
O -
1 2
The function assigned to the ADJ./OK button can not be changed.

Press the ADJ./OK button " to select [ADJ Button Setting 1], [ADJ Button Setting 2], [ADJ Button Setting 3], or [ADJ Button Setting 4], and then press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
7 Setup Menu
3 4
177
ISO Auto-High Settings

You can change the upper limit of the ISO setting for [Auto-Hi] (Auto high sensitivity setting) (GP.128) in [ISO Setting] on the shooting menu.
Available Settings AUTO 400 *Default setting AUTO 800 AUTO 1600
1 2

Press the ADJ./OK button " to select [ISO Auto-High Settings] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note ---------------------------------------------------------------------------------------------Images shot with a higher sensitivity may appear grainy.
3 4
7 Setup Menu
178
AF Auxiliary Light
You can set whether to use the AF auxiliary light when shooting with auto focus. When [AF Auxiliary Light] is set to [On], the AF auxiliary light lights when it is difficult to measure the distance with auto focus when shooting in dark surroundings, and the auto focus distance is measured.
1 2 3 4

Press the ADJ./OK button " to select [AF Auxiliary Light] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
7 Setup Menu
179
Operation Sound Settings

The following five operation sounds are made during camera operation.
Start sound Shutter sound Focus sound Beep sound Level sound : Sound when the camera is turned on. : Sound when the shutter release button is pressed. : Sound when the shutter release button is half-pressed and the camera focuses on the subject. : Error sound indicating an operation that cannot be performed. : When [Level Setting] is set to [Sound] or [Display+Sound] (GP.187), the sound is continually emitted at a set interval when the camera is level in shooting mode. Description All sounds on Only the level sound is emitted. Only the shutter sound and level sound are emitted.
Available Settings All *Default setting Level Sound Shutter Sounds
Note --------------------------------------------------------------------------------------------- If you try to perform an operation that cannot be performed, the beep sound is emitted regardless of the [Operation Sounds] setting. Regardless of the option selected, no sound is emitted when [Discreet Mode] is selected in scene mode.
1
7 Setup Menu

2 3 4
Press the ADJ./OK button " to select [Operation Sounds] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
180
Adjusting/Muting the Operation Sound Volume

The operation sound volume can be changed.
Available Settings (Mute) (Small) (Medium) *Default setting (Large)
1 2 3 4

Press the ADJ./OK button " to select [Volume Settings] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- When [Volume Settings] is set to [ ] (Mute), the level sound is not emitted even when [Level Setting] is set to [Display+Sound] or [Sound]. (GP.187) Regardless of the option selected, no sound is emitted when [Discreet Mode] is selected in scene mode.
7 Setup Menu
181
LCD Image Confirmation Time

Immediately after you press the shutter release button, the still image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 second, but this can be changed.
Available Settings Off (The image is not displayed for confirmation.) 0.5 seconds *Default setting 1 second 2 seconds 3 seconds Hold (The image remains displayed until the next time you half-press the shutter release button.)
1 2 3
7 Setup Menu

Press the ADJ./OK button " to select [LCD Confirmation Time] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note ---------------------------------------------------------------------------------------------When [LCD Confirmation Time] is set to [Hold], the displayed image can also be enlarged (GP.50) or deleted (GP.52).
182
Auto Power Off

If you do not operate the camera for a set period of time, it shuts off automatically to conserve battery power (Auto Power Off). By default, auto power off is set to five minutes, but you can change this setting.
Available Settings Off (Auto Power Off is turned off) 1 Min. 5 Min. *Default setting 30Min.
1 2 3 4

Press the ADJ./OK button " to select [Auto Power Off] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- To continue using the camera after auto power off turned the camera off, press the POWER button to turn the camera on again. You can also press and hold the 6 (Playback) button to turn the camera on in playback mode. Auto power off function does not work when the camera is connected to a computer or printer. When using interval shooting, the [Auto Power Off] setting is disabled and the auto power off function does not work.
7 Setup Menu
183
LCD Auto Dimmer Mode

When [LCD Auto Dim] is set to [On], the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness. The default setting is [On].
1 2 3

Press the ADJ./OK button " to select [LCD Auto Dim] and press the button $. Press the button !" to select [On].
Caution-----------------------------------------------------------------------------------------The [LCD Auto Dim] setting is disabled in synchro monitor mode. (GP.56)
7 Setup Menu
184
Auto Resize Zoom

To record pictures taken with digital zoom at actual size, select [Auto Resize]. This function allows you to crop and record a shot image. Conventional digital zoom enlarges a portion of an image to a set magnification. In contrast, auto resize records pictures taken with digital zoom at actual size, avoiding the drop in image quality that occurs when the image is enlarged. The image recording size changes depending on the auto resize zoom magnification. Auto resize zoom is available only when [Picture Quality/Size] is set to 3456 2592. (GP.101) Available Settings
Available Settings Normal *Default setting Auto Resize Description Normal digital zoom. Records the image at the image size set with [Picture Quality/Size]. Automatically resizes and then records the image.
Note ---------------------------------------------------------------------------------------------The digital zoom is enabled when [Picture Quality/Size] is set to a size other than 3456 2592.
Zoom Magnification and Recorded Image Size

Picture Quality/Size 3456 2592(9M) 3072 2304(7M) 2592 1944(5M) 2048 1536(3M) 1280 960(1M) 640 480(VGA)
(*)
Zoom Magnification 1.0 1.1 1.3 1.7 2.7 5.4
Focal Length(*) 300 mm 330 mm 400 mm 500 mm 810 mm 1620 mm
7 Setup Menu
185
1 2 3 4 5

Press the ADJ./OK button " to select [Digital Zoom Image] and press the button $. Press the button !" to select [Auto Resize]. Press the ADJ./OK button. Turn and hold the zoom lever toward z (Telephoto) until the maximum magnification is reached on the zoom bar, then momentarily release the zoom lever, and then turn the zoom lever again toward z.
Each time you turn the zoom lever toward z, the image is resized by one setting. The size at which the image is recorded is displayed above the zoom bar.
Caution----------------------------------------------------------------------------------------- This function is not available when scene mode is set to [Skew Correct Mode]. If [Auto Resize] is set in these situations, the digital zoom is activated instead. If the picture quality is set to Fine mode and the auto resize zoom is used, the compression ratio changes to Normal when recording.
7 Setup Menu
186
Level Confirmation
When [Level Setting] is turned on, the camera uses a level indicator and sounds to let you know whether the image is level. You can select from the following level confirmation settings. For information on how to use the level function during shooting, see P.58.
Available Settings Off Display *Default setting Display+Sound Sound Description The level indicator will not display. The level sound will not emit. The level indicator will display. The level sound will not emit. The level indicator appears on the screen and a level sound is emitted when the camera is level. The level indicator will not display. A level sound is emitted when the camera is level.

For the operating procedure, see P.166. You can also press and hold the DISP. button in shooting mode to display the setting menu. If you pressed and held the DISP. button, skip to Step 3.
2 3 4
Press the ADJ./OK button " to select [Level Setting] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- For information on how to use the level function during shooting, see P.58. The level function is not available when recording movies or during interval shooting. When [Volume Settings] is set to [ ] (Mute), the level sound is not emitted even when [Level Setting] is set to [Display+Sound] or [Sound].
7 Setup Menu
187
Grid Guide Display Options

Choose the type of framing grid available in shooting mode.
Available Settings Description A three-by-three grid for rule of thirds composition.
*Default setting A four-by-four grid with diagonal lines running from corner to corner makes it easy to find the center of the subject. Use for architectural photography or photographing products for display.
A two-by-two grid with the center of the frame left clear to make it easier to view the subject. Use if your subject is in motion.
1
7 Setup Menu

Press the ADJ./OK button " to select [Grid Guide Display Options] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
3 4
188
Shooting Information Display Frame

When [Shooting Info. Display Frame] is set to [On], you can display the shooting information display frame for normal symbol display or histogram display (GP.56). With the shooting information display frame, the shooting information is not displayed over the subject, so you can more easily compose your shot.
1 2 3 4 5

Press the ADJ./OK button " to select [Shooting Info. Display Frame] and press the button $. Press the button !" to select [On]. Press the ADJ./OK button. Press the DISP. button to change the display.
The shooting information display frame can be used with normal symbol display and histogram display. (GP.56)
7 Note --------------------------------------------------------------------------------------------- In easy shooting mode, the display cannot be changed using the DISP. button. Shooting information display frame cannot be used in movie mode.
189
Setup Menu
Minimum Shooting Distance Display

During shooting, the minimum shooting distance changes depending on the zoom position. To display the minimum shooting distance on the screen, set [Minimum Distance] to [Show].
1 2 3 4

Press the ADJ./OK button " to select [Minimum Distance] and press the button $. Press the button !" to select [Show]. Press the ADJ./OK button.
The minimum shooting distance is displayed on the screen.
7 Setup Menu
190
Automatic Rotation of Playback Images

You can set the camera to automatically rotate the image during playback according to the position of the camera.
Available Settings On *Default setting Off Description The playback image is automatically rotated. The playback image is not automatically rotated.
When [Auto Rotate] is set to [On], the direction of the playback image will be as follows. When you play back images with the camera held horizontally: Images shot with the camera held horizontally will appear with the same horizontal orientation. Images shot with the camera held vertically will automatically be rotated to a vertical orientation. When you play back images with the camera held vertically: Images shot with the camera held vertically will appear with the same vertical orientation. Images shot with the camera held horizontally will automatically be rotated to a horizontal orientation. When the camera is rotated during playback, the image is automatically rotated according to the camera position.
1 2 3 4

7 Setup Menu
Press the ADJ./OK button " to select [Auto Rotate] and press the button $. Press the button !" to make the setting. Press the ADJ./OK button.
191
Caution----------------------------------------------------------------------------------------- The playback image is not automatically rotated, even when [Auto Rotate] is set to [On], in the following cases. When playing back images shot in movie mode. In thumbnail view (GP.48) When playing back images shot with the camera tilted too far forward or backward. When playing back images upside-down (with the shutter release button facing down) When changing the camera position during magnified playback. When the image is going through skew correction (the correction area is displayed) in playback mode (GP.152) When playing back a slide show or viewing camera images on a TV, the camera is detected as being in the horizontal position even when [Auto Rotate] is set to [On]. In this case, when you play back images with the camera positioned vertically, images shot horizontally are not automatically rotated. The playback images are not automatically rotated even if you rotate the camera during playback.
Note ---------------------------------------------------------------------------------------------The following types of images are automatically rotated according to the orientation of the first image. Images shot using dynamic range double shot with [Plus Normal Shooting] set to [On]. Images shot using bracket shooting, normal continuous mode, M-Cont Plus, Speed Cont or Multi-trgt AF.
7 Setup Menu
192
File Name Settings

When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned. When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.
Available Settings Description On (Continue numbering) File names are automatically assigned to still images you take, in the format of R followed by seven digits, from R0010001.jpg to R9999999.jpg. With this setting, file numbering is continued even when the SD memory card is exchanged. Off (Do not continue File numbering is assigned, from RIMG0001.jpg to numbering) RIMG9999.jpg, for each SD memory card. *Default setting When the file name reaches RIMG9999, no more data can be recorded to that card.
1 2 3 4

Press the ADJ./OK button " to select [Card Sequence No.] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Note --------------------------------------------------------------------------------------------- When data is recorded to the internal memory, files are assigned consecutively numbered file names, just as if [Card Sequence No.] is set to [Off]. When images are transferred to a computer using DL-10 (GP.212), the file being transferred is renamed and saved. The file is saved with the name RIMG****.jpg (where **** indicates a number) even if [Card Sequence No.] is set to [On].
7 Setup Menu
Caution-----------------------------------------------------------------------------------------When the file name reaches RIMG9999 or R9999999, no more files can be saved. In this case, move image data from the SD memory card to the memory of the computer or a storage medium, and then format the SD memory card.
193
Date and Time Settings

You can shoot still images with the time or date stamped onto the picture. The date/time setting on the setup menu is explained here.
1 2

Press the ADJ./OK button " to select [Date Settings] and press the button $.
Press the button !"#$ to set the year, month, date, time and format.
Change the setting with !" and move the item with #$.
Check the information on the screen and then press the ADJ./OK button.
The confirmation screen appears.
7 Setup Menu
5 6

Once you have set the date and time, the display returns to the setup menu.

Note --------------------------------------------------------------------------------------------- If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again. To retain the date and time settings, load a battery with adequate remaining power for more than two hours.
194
Language Settings
You can change the language displayed on the screen. The default setting varies depending on where you purchased the camera.
Available Settings (Japanese) English Deutsch (German) Franais (French) Italiano (Italian) Espaol (Spanish) (Russian) (Simplified Chinese) (Traditional Chinese) (Korean) (Thai)
1 2

Press the ADJ./OK button " to select [Language/N] and press the button $.
The language selection screen appears.
3 4 5
Press the button !"#$ to select the desired setting. Press the ADJ./OK button.
Once you have set the language, the display returns to the setup menu.
7 Setup Menu
195
TV Playback Method
You can view your still images and movies on a television screen by connecting your camera to a television with the AV cable that came with your camera. (GP.163) Your camera is set to NTSC video format (used in North America and other countries/regions) for use with television equipment and other audiovisual equipment. If the equipment you want to connect to uses PAL format (used in Europe and elsewhere), then switch your camera to PAL format before connecting. The default setting varies depending on where you purchased the camera.
Available Settings NTSC PAL
1 2 3
7 Setup Menu

Press the ADJ./OK button " to select [Video Out Mode] and press the button $. Press the button !" to select the desired setting. Press the ADJ./OK button.
Once you have set the video format, the display returns to the Setup menu.
Note ---------------------------------------------------------------------------------------------This camera is not compatible with SECAM format.
196
8 Direct Printing
About the Direct Print Function

The Direct Print standard enables direct printing from a camera to a printer by connecting them via a USB cable. Photos can be printed quickly and easily from your digital camera without using a computer. Caution-----------------------------------------------------------------------------------------You cannot print AVI files (movies) or MP files with this function.
Note --------------------------------------------------------------------------------------------- This camera uses PictBridge, an industry standard for Direct Printing. Your printer must be compatible with PictBridge to use the Direct Print function. For support information, see the documentation that came with the printer.
197
Direct Printing 8
Connecting the Camera to a Printer

Connect your camera to a printer using the USB cable provided.
1 2
Make sure that the camera is off. Connect your camera to a printer using the USB cable provided.
Your camera turns on automatically. Turn on the printer if it is not already on.
Note ---------------------------------------------------------------------------------------------To disconnect the camera from the printer, check that the camera is turned off after printing is finished, and disconnect the USB cable.
Caution----------------------------------------------------------------------------------------- Do not force the USB cable into the terminal. Do not apply excessive force with the USB cable connected. When using the USB cable, do not move the camera with the USB cable.
198
Direct Printing 8
Printing Still Images

You can print still images from the camera with a PictBridgecompatible printer. Still images are sent from the internal memory when no SD memory card is loaded or from an SD memory card when one is loaded. Caution-----------------------------------------------------------------------------------------Do not disconnect the USB cable during printing.
Note --------------------------------------------------------------------------------------------- If a [Printer Error.] message appears during image transfer, check the printer status and take the appropriate action. If a computer connection message appears even though the camera is connected to the printer, reconnect the camera and press the ADJ./OK button within 2 seconds.
Printing One or All Still Images
1 2 3 4 5 6
Check that the printer is ready to print.

The [Connecting] screen appears.

Direct Printing
The Direct Print playback mode screen appears.
Press the ADJ./OK button !"#$ to select an image for printing. Press the ADJ./OK button. Press the ADJ./OK button !" to select [1 File] or [All Files]. Press the ADJ./OK button.
The Direct Print menu appears.
Cancel 1 File All Files Execute
199
Press the ADJ./OK button !" to select an item, and then press the button $ to display the detailed options screen.
When [Connecting] is displayed, the connection to the printer is not yet established. When a connection is established, [Connecting] disappears and [Direct Print] appears. Proceed with this step after the connection is established. The following items can be selected. Each item is available only when supported by the printer connected to the camera. Item Name Paper Size Paper Type Layout Description Sets the paper size. Sets the paper type. Sets the number of images printed on a sheet of paper. The number of images that can be laid out on a sheet of paper varies depending on the connected printer. Selects whether to print the date (shooting date). The date format can be set using the date/time option in the setup menu. If the picture was taken using [Date Imprint] (G P.123), only the imprinted date will be printed. Selects whether to print the file name. Selects whether to optimize the image data (still image) prior to printing on the printer. Sets the print image size. Sets the print quality. Prints on forms. Sets the print quantity. Selects whether to conserve toner by using less ink during printing. Selects whether to print on both sides of the paper. During duplex printing, one copy is printed for each still image. Only one copy is printed even if you selected more than one copy to print in Step 6 on P.202.
Date Print
File Name Print Optimize Image Print Size Print Quality Report Print(*) Printing Quantity Toner Saving(*) 1-Side/2-Sides(*)
200
Direct Printing 8
(*)
Each item is available only when supported by the Ricoh printer connected to the camera.
Press the ADJ./OK button !" to select the setting, and then press the ADJ./OK button.
The display returns to the Direct Print menu.
Repeat Steps 7 and 8 to change other settings as required.

Note --------------------------------------------------------------------------------------------- To specify the settings as the default settings next time the camera is connected to the printer, press the MENU button when the screen in Step 7 is displayed. When the screen at the right appears, press the ADJ./OK button #$ to select [Yes] and press the ADJ./OK button. To use the settings last set the next time the camera is connected to the printer, select [No].
10

The selected still images are sent to the printer and the [Sending] screen appears. Pressing the DISP. button cancels the operation. When the images have been sent to the printer, the display returns to the Direct Print playback mode screen and printing starts.
201
Direct Printing 8
Printing Several Still Images
1 2 3 4 5 6
Check that the printer is ready to print.

The [Connecting] screen appears.

The Direct Print playback mode screen appears.
Turn the zoom lever toward 9 (Thumbnail View).

Press the ADJ./OK button !"#$ to select a still image for printing. Press the ADJ./OK button. Press the ADJ./OK button !" to set the number of copies to print.
Prnt Fil Last File F 160
202
Direct Printing 8
7 8 9 10
Press the button #$ to select the next still image for printing.
Forward
Press the button !" to set the number of copies to print. Repeat Steps 7 and 8 to select all the still images to be printed and the number of copies for each. Press the ADJ./OK button.
The Direct Print menu appears.
11
Press the ADJ./OK button !" to select an item, and then press the button $ to display the detailed options screen.
When [Connecting] is displayed, the connection to the printer is not yet established. When a connection is established, [Connecting] disappears and [Direct Print] appears. Proceed with this step after the connection is established. For available settings, see P.200.
12 13 14
Press the ADJ./OK button !" to select the setting, and then press the ADJ./OK button.
The display returns to the Direct Print menu.
Repeat Steps 11 and 12 to change other settings as required. Press the ADJ./OK button.
The selected still images are sent to the printer and the [Sending] screen appears. Pressing the DISP. button cancels the operation. When all the selected still images have been sent from the camera to the printer, the camera display returns to the Direct Print playback mode screen.
Direct Printing 8
Note --------------------------------------------------------------------------------------------- Only images with a printer symbol ( ) are printed. If you cancel printing and then try to print again, make sure that the printer symbol is on the images you want to print. The same still image can also be printed several times on a single sheet. The available items vary depending on the functions of the printer. To print images using the printers default settings, select [Printer Select] on the detailed options screen.
203
9 Downloading Images to Your Computer

The screen images shown here may differ from the images displayed on your computer depending on your computer OS.
For Windows
Refer to P.217 for Macintosh. You can download images to a computer using either of the following methods. 1 Downloading Images to Your Computer 9 Download images using DL-10 or other image download software. (GP.212)
To use DL-10, you must install the software from the supplied CD-ROM (GP.206).
Download images without using DL-10 or other image download software. (GP.213) Caution-----------------------------------------------------------------------------------------Pictures can not be copied from the camera to computers running Windows 98 or Windows 98SE. Use a card reader to copy pictures from a memory card (G P.215).
Note ---------------------------------------------------------------------------------------------For details on how to download images from the camera to your computer, see the Software User Guide available from the supplied CD-ROM. For how to display the Software User Guide, see P.210.
204
System Requirements for Using the Supplied CD-ROM

The following environments are necessary for using the supplied CD-ROM. Please check your computer, or the computers user manual.
Operating Systems Supported Windows 2000 Professional Service Pack 4 Windows XP Home Edition Service Pack 3/Professional Service Pack 3 Windows Vista Service Pack 2 CPU Windows 2000/Windows XP: Pentium lll 500 MHz or faster Windows Vista: Pentium lll 1 GHz or faster Memory Windows 2000/Windows XP: 256 MB or more Windows Vista: 512 MB or more Hard drive space required 160 MB or more for installation Display Resolution 1024 768 pixels or greater Display Colors 65,000 colors or greater CD-ROM Drive A CD-ROM drive compatible with the above-mentioned computer USB Port A USB port compatible with the above-mentioned computer
Downloading Images to Your Computer 9
Caution----------------------------------------------------------------------------------------- The supplied CD-ROM is not supported on 64-bit versions of the Windows operating system. The supplied CD-ROM is not supported on Windows 98/Windows 98 SE and Windows Me. If your computer has an upgraded OS, the USB function may not work normally, so it cannot be supported. The provided software may not operate properly if changes are made to the operating system, such as with patches and service package releases. The camera does not support connection to a USB port added by using an extension function (PCI bus or other). If used in conjunction with a hub or other USB devices, the software may not work properly. When dealing with movies and other large files, a larger memory environment is recommended.
205
CD-ROM Setup
Once you insert the supplied CD-ROM in the CD-ROM drive, the installer screen appears automatically.
Item Name Installing the software Browse Users Manual (Software Version) Browse CD-ROM Content
Description Use this button to install software required for batch downloading and editing of images. Click this to display the Software User Guide (PDF). Click this to display the list of files contained on the CD-ROM.
Refer to P.206 P.210 P.210
206
When [Installing the software] Is Clicked

The following software will be installed:
Software DL-10 Irodio Photo & Video Studio USB Driver Description Downloads images collectively to your computer. Shot images can be displayed, managed, or edited. Used to connect an earlier model Ricoh camera to a computer running Windows 98/Windows 98 SE/Windows Me/Windows 2000. Not available with this camera. Used to connect an earlier model Ricoh camera to a computer running Windows XP/Windows Vista. Not available with this camera.
WIA Driver
Caution----------------------------------------------------------------------------------------- Do not install the software when the camera is connected to your computer with a USB cable. The names for DC Software items differ from the names for Caplio Software items provided with previous models as shown below. Caplio Software RICOH Gate La Caplio Viewer Caplio Server Caplio Setting
(*)
DC Software DL-10 DU-10(*) SR-10(*) ST-10(*)
Not used with this camera.
If Caplio Software from a CD-ROM supplied with a previous model is already installed on your computer, a message asking you to uninstall the Caplio Software before installing DC Software will appear when you try to install the new software. Please follow the instructions in the message. If Caplio Viewer, Caplio Server, or Caplio Setting is already installed on your computer, it will be replaced with the new software and you will be able to continue using the software as before. If you have already uninstalled the Caplio Software before the message appears (GP.211), DU-10, SR-10, or ST-10 will not be installed even if you install DC Software. Note that uninstalling the software for earlier Ricoh cameras may reset user preferences for DL-10 or RICOH Gate La. Administrator privileges are required for installation. DL-10 is not network-compatible. Use as a stand-alone application.
Note ---------------------------------------------------------------------------------------------The camera is provided with Irodio Photo & Video Studio software that allows you to display and edit images from your computer. For how to use Irodio Photo & Video Studio, see the displayed Help. For the latest information about Irodio Photo & Video Studio, access the Web page of Pixela Co., Ltd. (http://www.pixela.co.jp/oem/irodio/e/irodio_digitalphoto_videostudio/).
207
Here is an example of the Windows XP screen.
Start your computer and insert the supplied CD-ROM in the CD-ROM drive.
Operating systems other than Windows Vista The installer screen appears automatically. Windows Vista The Autorun screen appears automatically. Select [Run Autorun.exe]. The installer screen appears automatically.
2
Click [Installing the software].

Operating systems other than Windows Vista After a while, the [Choose Setup Language] screen appears. Windows Vista A screen appears to confirm user account management. Select [Allow] for the access request to the computer. After a while, the [Choose Setup Language] screen appears.
3 4
Confirm the language, and then click [OK].

The [Welcome to the InstallShield Wizard for DC Software] screen appears.
Click [Next].
The [Choose Destination Location] screen appears.
208
5 6
Confirm where you want to install and then click [Next].

The [Select Program Folder] screen appears.
Confirm the destination location and then click [Next].

The Irodio Photo & Video Studio installer starts. Install Irodio Photo & Video Studio following the messages displayed on the screen. Depending on your computer, it may take some time until the next screen is displayed. When installation of Irodio Photo & Video Studio is completed, a dialog box appears, indicating that all software applications have been installed.
7 8
Click [Finish].
A dialog box indicating that installation of DC Software is complete appears.
When a message appears asking you to restart your computer, select [Yes, I want to restart my computer now.] and then click [Finish].
Your computer will restart automatically. After your computer restarts, a Windows security warning message appears.
Click [Unblock] for DL-10.

Note ---------------------------------------------------------------------------------------------You can remove (uninstall) the software. (GP.211)
209
When [Browse Users Manual (Software Version)] Is Clicked

The Software User Guide (PDF file) on the CD-ROM is displayed on your computer screen. If you have Acrobat Reader or Adobe Reader installed on your computer, simply click [Browse Users Manual (Software Version)]. Adobe Reader must be installed to view the PDF file.
When [Browse CD-ROM Content] Is Clicked

You can check folders and files on the CD-ROM. The CD-ROM contains not only the software installed by clicking [Installing the software] but also Adobe Reader software. Adobe Reader Adobe Reader is required to display the operation manual (PDF file). If the computer is running under Windows, Adobe Reader can be installed. Acrobat Reader or Adobe Reader need not be installed if already installed on your computer. Caution----------------------------------------------------------------------------------------- Do not install the software when the camera is connected to your computer with a USB cable. Administrator privileges are required for installation.
210
Note --------------------------------------------------------------------------------------------- For details about Adobe Reader, see Help for Adobe Reader. To install Irodio Photo & Video Studio alone, double-click Irodio Photo & Video Studio.exe in the Irodio Photo & Video Studio folder. Installation of Adobe Reader 9.1 requires MSI (Microsoft Windows Installer) version 3.1 or later and either Microsoft Internet Explorer 6.0 or later or Firefox 2.0 or later. Microsoft Internet Explorer and Microsoft Windows Installer are available via Microsoft Update.
Start your computer, and insert the supplied CD-ROM into the CD-ROM drive.
Operating systems other than Windows Vista The installer screen appears automatically. Windows Vista The Autorun screen appears automatically. Select [Run Autorun.exe]. The installer screen appears automatically.
2 3 4 5 6
Click [Browse CD-ROM Content].

The files on the CD-ROM are listed.
Double-click the [Adobe Reader] folder.

Double-click the [English] folder. Double-click [AdbeRdr910_en_US_Std] (AdbeRdr910_en_US_Std.exe).

A screen appears to confirm user account management for Windows Vista. Select [Continue].
Install Adobe Reader by following the messages displayed.
Uninstalling the Software

Caution----------------------------------------------------------------------------------------- Administrator privileges are required. If any other program is active or unsaved data remains, save the data and terminate the program before uninstalling.
DC Software
1 2 3
Click [Start] on the Windows task bar. Select [Settings]-[Control Panel] ([Control Panel] for Windows XP/Windows Vista). Double-click the [Add/Remove Programs] icon (or the [Add or Remove Programs] icon in Windows XP).
211
4 5 6
Select [DC Software], and then click the [Change/ Remove] button. Confirm file deletion and click [OK].
The [Shared File Detected] dialog box appears.
Select the [Dont display this message again.] check box, and then click [Yes].
The uninstallation process begins. When it is finished, close the displayed window.
Irodio Photo & Video Studio
1 2
Click [Start] on the Windows task bar. Select [Settings]-[Control Panel] ([Control Panel] for Windows XP/Windows Vista). Double-click the [Add/Remove Programs] icon (or the [Add or Remove Programs] icon in Windows XP). Select [Irodio Photo & Video Studio] and then click [Change/Remove]. Confirm file deletion and click [OK].
The uninstallation process begins. When it is finished, close the displayed window.
3 4 5 6
Restart your computer.
Downloading Images Using DL-10

After installing the software on your computer, connect your camera to the computer.
1 2
Make sure the camera power is off. Connect the USB cable to the USB port of your computer.
212
Connect the USB cable to the USB terminal of your camera.

Your camera turns on and the computer automatically reads the necessary files.
DL-10 starts and image transfer begins automatically.

DL-10 automatically creates a folder called [Digital Camera] inside your [My Documents] folder. Downloaded images are saved in folders with the date of each shot, inside the [Digital Camera] folder. (The files will continue to be saved in the [Caplio] folder if you were previously using Caplio Software.) Set the correct date and time on the camera before shooting.
When image transfer is completed, disconnect the camera and the computer. (GP.216)
Note ---------------------------------------------------------------------------------------------If image transfer does not begin, please try the following procedures. Click the [Save] button in the DL-10 window. Restart your computer and perform Steps 1 to 5 again. Confirm that the [Saves automatically when connected to USB] checkbox in the [Option Settings] dialog box for DL-10 is selected.
Downloading Images Without Using DL-10

You can download images from the camera to a computer without having to use software.
1 2
Make sure that the camera power is off. Connect the accessory USB cable to a USB port of your computer.
213

Your camera turns on. Example of the display in Your computer automatically reads a file necessary for recognizing the camera as a Windows XP drive. After this preparation, the camera is displayed as a drive under [My Computer].
From the displayed drive, copy a file to the desired location.

The figure at right shows the folder configuration in the drive. When the contents of the internal memory are displayed, the drive name is [RICOHDCI].
Example of the display in Windows XP
214
Caution----------------------------------------------------------------------------------------- Do not turn off the camera or disconnect the USB cable during image transfer. If a file with the same name already exists at the destination, it is overwritten. If you do not want the file to be overwritten, transfer data to another folder, or change the file name of the file at the destination.
Note ---------------------------------------------------------------------------------------------When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal memory are displayed.
Downloading Images from an SD Memory Card---------------------------------It is possible to download images from an SD memory card to the computer via a PC card slot or card reader. Depending on the type of PC card slot or card reader, a memory card adapter may be required when using an SD memory card. If the SD memory card can be used in the PC card slot, no memory card adapter is required. Images are stored in an SD memory card in the hierarchy shown below.
Image files
Example of the display in Windows XP Card Reader This is a device connected to a computer to read the contents of cards. In addition to the memory card adapter-type, there are card readers compatible with various types of cards, into which you can directly load an SD memory card. Use a card reader that is compatible with your computers operating system and the size of the SD memory card.
Caution-----------------------------------------------------------------------------------------If you connect the camera or a card reader to a computer and then directly display, edit or save SD memory card images on the computer, you may no longer be able to play back the images on the camera. Download the images to the computer before displaying, editing or saving them.
215
Disconnecting the Camera from Your Computer

Before disconnecting the camera from the computer, click the [Safely Remove Hardware] or [Unplug or Eject Hardware] icon in the taskbar (the illustration above shows the icon for Windows XP) and select [Safely Remove USB Mass Storage Device] or [Stop USB Mass Storage Device] from the menu that appears. You can then disconnect the USB cable. Note --------------------------------------------------------------------------------------------- If the USB cable is disconnected without disabling the connection, the Unsafe Removal of Device screen may be displayed. Be sure to stop the connection before removing the USB cable. Do not disconnect the USB cable during image downloading. Make sure that downloading has completed, disable the connection, and then disconnect the cable.
216
For Macintosh
Refer to P.204 for Windows. This camera supports the following Macintosh operating systems. Mac OS 9.0 to 9.2.2 Mac OS X 10.1.2 to 10.5.7 Caution-----------------------------------------------------------------------------------------VM-1 software can be installed on Macintosh computers as described on P.219. More information is available in the Software User Guide (note that Acrobat Reader is required to view the Software User Guide under Mac OS 9).
1 2
Make sure that the camera power is off. Connect the accessory USB cable to a USB port of your computer.

Your camera turns on. Your computer automatically reads the file necessary for recognizing the camera as a drive. After this preparation, the camera is displayed as a drive on the Desktop.
217
From the displayed drive, copy a file to the desired location.

The figure below shows the folder configuration in the drive. When the contents of the internal memory are displayed, the drive name is [RICOHDCI].
Disconnecting the Camera from Your Computer
218
1 2
Drag and drop the displayed drive or the volume icon to the Trash.
If a screen appears prompting you to enter the administrators password, enter the password.
Disconnect the USB cable.

Note --------------------------------------------------------------------------------------------- You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu in Mac OS X to cancel the connection. If the USB cable is disconnected without disabling the connection, the Unsafe Removal of Device screen may be displayed. Be sure to stop the connection before removing the USB cable. Do not disconnect the USB cable during image downloading. Make sure that downloading has completed, disable the connection, and then disconnect the cable. When you connect your camera to a Macintosh computer, a file called FINDER.DAT or .DS_Store may be created in your SD memory card, which will appear as [Unmatched File] on your camera. You can delete this file from the SD memory card if you wish.
Using the MP File Viewer

When you shoot one still image with M-Cont Plus, Speed Cont, or Multi-trgt AF, the image is recorded as one MP file. By using the VM-1 MP file viewer, you can play back MP files on your Macintosh computer and export still images. This section explains how to install and uninstall the VM-1 software included on the supplied CD-ROM. For details on how to play back MP files on your computer or export still images from MP files using the MP file viewer, see the Software User Guide available from the supplied CD-ROM. System Requirements for Using the Supplied CD-ROM The following environments are necessary for using the supplied CD-ROM. Please check your computer, or the computers user manual.
Operating Systems Supported Macintosh computer Internal Memory Hard Disk Available Memory CD-ROM Drive Mac OS X 10.4 to 10.5.7 Apple Inc. Macintosh Series Mac OS X 10.4 256 MB or more Mac OS X 10.5 512 MB or more 5 MB or more A CD-ROM drive compatible with the above-mentioned Macintosh computer
Note ---------------------------------------------------------------------------------------------VM-1 supports Japanese, English, French and Chinese (Simplified).
Installing VM-1
1 2 3 4 5
Start your Macintosh computer and insert the supplied CD-ROM in the CD-ROM drive. Double-click the [RICOH] icon. Double-click the [VM-1] folder. Double-click the [VM-1 Installer.pkg] icon.
The [Install VM-1] window is displayed.
Click [Continue].
The window for selecting the installation location appears.
219
6 7 8 9
Select the disk for installation, and then click [Continue]. Click [Install].
To change the installation location, click [Change Install Location...]. To upgrade VM-1, click [Upgrade]. The window for entering your name and password appears.
Enter your name and password, and then click [OK].

A message appears to notify you that the installation is complete.
Click [Close].
Deleting (Uninstalling) VM-1 Caution----------------------------------------------------------------------------------------- If you have any other software applications running or data that has not been saved, quit the other software applications and save the data before uninstalling VM-1. If an error occurs during the uninstallation process, update your Mac OS to the latest version.
220
1 2 3 4 5 6 7
Open the [Applications] folder. Open the [Utilities] folder. Open the [VM-1 Utility] folder. Double-click the [VM-1 Uninstaller] icon.
The uninstall confirmation window appears.
Click [OK].
The window for entering your name and password appears.
Enter your name and password, and then click [OK].

A message appears to notify you that the uninstallation is complete.
Click [OK].
10 Appendices
Troubleshooting
Error Messages
If an error message is displayed on the screen, check the information on the reference page and take the corresponding action.
Error Message Insert card. Set date. The file number limit has been exceeded. Unmatched File Refer to No card is loaded. Insert a card. P.26 The date is not set. Set the date. P.194 The file number limit has been exceeded. Use another card. P.193 P.23 P.154 P.24 -
This file cannot be displayed on the camera. Check the file contents on your computer, and then delete the file. All the files cannot be copied because there is insufficient memory on the card. Use another card. Protected The file selected for deletion is protected. Card Is Write-Protected. The card is locked (write-protected). Unlock the card. Print settings cannot be applied to This file (movie or other file) cannot be selected for printing. this file. Insufficient Memory Files cannot be stored. Make sure there is sufficient memory or delete unwanted files. Insufficient memory. Continue?
Format internal memory. Format card. Card Error Writing Data File not found Out of memory. cannot record. No files to restore.
P.52 P.168 P.169 The image print number limit has been exceeded. Select an P.202 image and set the number to 0. The internal memory requires formatting. P.169 The card is not formatted. Format the card with this camera. P.168 Reformat the card. If the error message still appears after P.168 that, the card may be faulty. Do not use the card. Writing file to memory. Wait until writing finishes. There are no files that can be played back. The number of remaining shots is 0. Switch to another card P.23 or the internal memory. There are no files to restore. P.162
221
Appendices 10
Camera Troubleshooting
Power Supply
Solution Load the rechargeable battery correctly or charge the battery as required. An unacceptable battery is used. Use the dedicated rechargeable battery. Never use any other battery. The camera is automatically turned Turn the camera back on. off by auto power off. The battery is loaded in wrong Load correctly. direction. Because the camera overheated Wait until the temperature of the the power was automatically camera returns to normal. Do not turned off. attempt to cool the camera suddenly. The camera turns off The camera was left unattended Turn the camera back on. during use. and unused, so auto power off turned it off. Battery is running low. Charge the rechargeable battery. An unacceptable battery is used. Use the dedicated rechargeable battery. Never use any other battery. The camera does not Camera malfunction. Remove the battery and load it turn off. again. The battery has been A (manganese dry cell or other) Use the dedicated rechargeable fully charged, but: unacceptable battery is used. battery. Never use any other The battery symbol is battery. displayed, indicating a low battery level. The camera turns off. Cannot charge the Battery has reached the end of its Replace with a new rechargeable battery. useful life. battery. Battery runs out quickly. It is being used at extreme high or low temperatures. Many shots are being taken in dark places or other location requiring extensive use of flash. Problem The camera does not turn on. Cause Battery is not loaded or is exhausted. Refer to P.26 P.25 P.22
P.28 P.26 -
P.28
P.25 P.22
P.26 P.22
P.26 -
10
222
Appendices
Shooting
Problem The camera does not shoot even if you press the shutter release button. Cause Battery is exhausted. The camera is not on. The camera is in playback mode. The shutter release button is not pressed all the way. The SD memory card is not formatted. The SD memory card is full. Solution Charge the rechargeable battery. Press the POWER button to turn the camera on. Press the 6 (Playback) button to select the shooting mode. Press the shutter release button all the way. Format the card. Refer to P.25 P.28 P.46 P.34 P.168 P.26 P.52 P.26 P.43 P.24 P.182 P.28 P.170 P.56 P.34 P.34 P.105 P.41
Load a new card, or delete unwanted files. The SD memory card has reached Load a new SD memory card. the end of its useful life. The flash is charging. Wait until the flash mode symbol stops blinking. The SD memory card is locked. Unlock the card. The contact surface of the SD Wipe with a soft, dry cloth. memory card is dirty. Unable to view the shot The image confirmation time is too Lengthen the image confirmation image. short. time. Images do not appear The camera is not on or the picture Turn the camera on or adjust the on the picture display. display is dark. brightness of the picture display. The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable. The screen display is in Press the DISP. button to change synchro-monitor mode. the display. Although the camera is The lens is dirty. Wipe clean with a soft, dry cloth. set to auto focus, it is The subject is not in the center of Shoot with focus lock. unable to focus. the shooting range. It is a hard-to-focus subject. Shoot with focus lock or manual focus. Although the camera is The camera incorrectly focused Shoot with macro mode or move not in focus, the green because the distance to the away from the subject. frame appears in the subject is too close. center of the picture display. The picture is blurred. You moved the camera when Hold the camera with your elbows (The J symbol pressing the shutter release pressed against your body. appears.) button. Use a tripod. Use the camera shake correction function. When shooting in a dark place Use the flash. (such as indoors), the shutter Raise the ISO setting. speed slows down and pictures Use the camera shake correction become easily blurred. function.
Appendices 10
P.32 P.121
P.43 P.128 P.121
223
Problem Cause The flash does not fire or The flash cannot be used in the the flash cannot charge. following cases: In bracket shoting In continuous mode In movie mode In discreet mode In some scene modes, the flash is disabled by default. The flash is set to flash off. Battery is running low. Even though the flash The distance to the subject fired, the picture is dark. exceeds the flash range.
Solution To shoot with the flash, change the settings or mode.
Refer to P.43 P.112 P.108 P.87 P.94 P.74
10
Cancel Flash Off. Charge the rechargeable battery. Get closer to your subject and shoot. Change the flash mode or the ISO setting. The subject is dark. Correct the exposure. (Exposure compensation also changes the light intensity of the flash.) The light intensity of the flash is not Adjust the light intensity of the appropriate. flash. The image is too bright. The light intensity of the flash is not Adjust the light intensity of the appropriate. flash. Alternatively, move a little away from the subject or illuminate the subject with another light source instead of using the flash. Subject is overexposed. Correct the exposure. (The [!AE] symbol appears.) Cancel exposure time. The brightness of the picture Adjust the brightness of the display is not appropriate. picture display. The image is too dark. The shot was taken in a dark place Cancel Flash Off. while set to flash off. The subject is underexposed. Correct the exposure. Set to long exposure time. The brightness of the picture Adjust the brightness of the display is not appropriate. picture display. The image lacks natural The picture was shot in conditions Add a white object to the color. that made it difficult for auto white composition or use a white balance to adjust the white balance setting other than auto. balance. The date or recording The screen display function is set Press the DISP. button to change information does not to no display. the display. appear on the screen. The brightness of the You are using AF in a dark place or This is normal. picture display changes when the auto focus range and during AF. surrounding brightness are different.
P.43 P.25 P.43 P.128 P.124
P.111 P.43 P.111
P.124 P.117 P.170 P.43 P.122 P.117 P.170 P.126
224
Appendices
P.56
Problem Cause The level indicator is not [Level Setting] is set to [Off] or displayed. [Sound]. The display is set to a setting other than normal symbol display or histogram. The camera is upside down (shutter release button is on the bottom). The image is tilted even You shot the image while moving, though it was shot with such as on a amusement ride. the level indicator in the The subject is not level. middle or while the level sound was sounding. Self timer lamp does not [Discreet Mode] is selected in light. scene mode.
Solution Set [Level Setting] to [Display] or [Display+Sound]. Press the DISP. button to change the display to normal symbol display or histogram. Hold the camera correctly.
Refer to P.187 P.56
Shoot in an environment that is not moving. Check the subject. Choose another mode.
P.74
225
Appendices 10
Playback/Deleting
Problem Cannot play back, or the playback screen does not appear. Cause The camera is not in playback mode. The VIDEO/AV cable is not connected properly. The Video Out Mode setting is incorrect. The contents of the SD No SD memory card is loaded, or memory card cannot be an SD memory card with no stored played back, or the images is loaded. playback screen does You played back an SD memory not appear. card that was not formatted with this device. You played back an SD memory card that was not recorded normally. The contact surface of the SD memory card is dirty. There is something wrong with the SD memory card. Solution Press the 6 (Playback) button. Reconnect it properly. Set it to the correct format. Load a card with stored images. Refer to P.46 P.163 P.196 -
Load a card that was formatted and recorded with this device. Load a normally recorded card.
P.26 P.168 -
Wipe with a soft, dry cloth.
The picture display turned off.
Battery is running low. The camera was left unattended and unused, so auto power off turned it off. Part of the screen The screen is highlighted due to an It is recommended that you shoot flashes in black. overly bright area. another image while avoiding direct sunlight and setting the exposure level lower (-). A file cannot be deleted. The file is protected. Unprotect the file. The SD memory card is locked. Unlock the card. Cannot format the SD The SD memory card is locked. Unlock the card. memory card.
Play back images from another card and if there is nothing wrong with the card, the camera is okay. There may be something wrong with the card, so do not use it. Charge the rechargeable battery. P.25 Turn the camera back on. P.28
P.57 P.124
P.154 P.24 P.24
10
226
Appendices
Other Problems
Problem Cannot load the SD memory card. The camera does not operate even when the buttons are pressed. Cause The card is facing the wrong way. Battery is running low. Camera malfunction. Solution Load correctly. Charge the rechargeable battery. Press the POWER button to turn the camera off, and then press the POWER button to turn the camera on again. Remove the battery and load it again. Set the correct date/time. If the battery is removed for more than one week, the date setting will be lost. Make the settings again. Set the time for auto power off. Choose another mode. Use [Volume Settings] to set the volume to a setting other than mute. Set it to the correct format. Refer to P.26 P.25 P.28
P.26 P.194 P.194
The date is incorrect. The set date disappeared.
The correct date/time are not set. The battery was removed.
Auto power off does not Auto power off is set to [Off]. work. The operation sound [Discreet Mode] is selected in cannot be heard. scene mode. The operation sound volume is turned off. Images do not appear on the TV. The [Video Out Mode] setting is incorrect. The AV cable is not connected. The TV is not correctly set to VIDEO IN.
P.183 P.74 P.181
P.196
Connect the AV cable properly. P.163 Check that the TV is correctly set to VIDEO IN.
227
Appendices 10
Software and Computer Troubleshooting

For details about the software, refer to the Software User Guide (PDF file). Warning Messages Under Windows XP Service Pack 3 and Windows Vista Service Pack 2 When software for your Ricoh digital camera is used on a computer with Windows XP Service Pack 3 or Windows Vista Service Pack 2 installed, the following warning message may appear at software activation or USB connection. With this in mind, refer to the following. Here is an example of the Windows XP screen. When this warning message is displayed:
Check the information provided on the message screen to make sure that it comes from a reputable source, and then click the [Unblock] button.
Caution-----------------------------------------------------------------------------------------If you do not recognize the program, you should block it because it may be a virus. Click the [Keep Blocking] button to prevent the program from connecting to the Internet.
If you clicked the [Keep Blocking] button: Follow the steps below to check the Windows Firewall settings. Appendices 10
Open the [Windows Firewall] Control Panel.

Open the [Start] menu and select [Control Panel], then double-click [Windows Firewall] (if Windows Firewall is not listed,click [Switch to Classic View] at the top left corner of the Control Panel window).
228
Allow the Ricoh application Internet access.

In the [Windows Firewall] dialog,click the [Exceptions] tab and check whether DL-10 is listed under [Programs and Services]. If it is, place a check in the check box next to DL-10 and click OK. If it is not listed,click [Add Program] to add DL-10 to the list of exceptions.
If you clicked the [Ask Me Later] button: Each time the program is activated, the [Windows Security Alert] dialog box appears. Then you can select [Unblock].
229
Appendices 10
Specifications
No. of effective pixels (camera) Image Sensor Lens Focal Length F-aperture Shooting Distance Approx. 9.29 million effective pixels 1/2.3" CMOS (Approx. 10.29 total million pixels) 4.9 mm to 52.5 mm (equivalent to 28 mm to 300 mm on a 35-mm camera) F3.5 to F5.6 Normal shooting: Approx. 30 cm to A (Wide-angle) or 1.5 m to A (Telephoto) (from the front of the lens) Macro shooting: Approx. 1 cm to A (Wide-angle), 28 cm to A (Telephoto) or 1 cm to A (Zoom macro mode) (from the front of the lens) 10 elements in 7 groups (4 aspherical lens elements with 5 surfaces)
10
230
Optical zoom at 10.7, Digital zoom at 4.8, Auto resize zoom at approx. 5.4 (VGA image) Focus Modes Multi AF (Contrast AF method)/Spot AF (Contrast AF method)/Continuous AF/Multi-trgt AF/MF/Snap/A (with AF Auxiliary Light) Antiblur Function Image Sensor Shift Image Stabilizer Shutter Still Image 8, 4, 2, 1 to 1/2000 seconds (The upper and lower limits differ for each Speed shooting mode and flash mode.) Movie 1/30 to 1/2000 seconds Exposure Exposure Multi Light Metering (256 segments)/Center-weighted Light Metering/Spot Control Metering Mode Metering Exposure Mode Program AE Exposure Manual exposure compensation (+2.0 to -2.0 EV in 1/3 EV Steps), Compensation Auto bracket function (0.5 EV, 0, +0.5 EV) ISO Sensitivity Auto/Auto-Hi/ISO 80/ISO 100/ISO 200/ISO 400/ISO 800/ISO 1600 (Standard Output Sensitivity) White Balance Mode Auto/Multi-pattern Auto/Outdoors/Cloudy/Incandescent Lamp/ Incandescent Lamp 2/Fluorescent Lamp/Manual Settings, White balance bracket function Flash Flash Mode Auto flash (fires automatically in low-light conditions and when the subject is backlit)/Red-eye Flash/Flash On/Flash Synchro./Flash Off Built-in flash Approx. 20 cm to 3.0 m (Wide-angle), approx. 28 cm to 4.0 m (Telephoto) Range (ISO Auto/ISO 800, from the front of the lens) Flash 2.0EV (1/3 EV Steps) Compensation Picture Display 3.0" Transmissive LCD, approx. 920,000 dots Shooting Mode Auto shooting mode/Easy shooting mode/Scene mode (Portrait/Sports/ Night. Port./Landscape/Nightscape/High Sens/Discreet Mode/Zoom Macro/ High Contrast B&W/Miniaturize/Skew Correct Mode/Text Mode)/My Settings Mode/Movie Mode/Dynamic Range Double Shot Mode/Continuous Mode Picture Quality Mode*1 F (Fine), N (Normal) Number of Still Image 3456 2592, 3456 2304, 2592 2592, 3072 2304, 2592 1944, Recorded 2048 1536, 1280 960, 640 480 Pixels Multi-Picture 3456 2592, 3456 2304, 2592 2592, 3072 2304, 2592 1944, 2048 1536, 1728 1296, 1280 960, 640 480 Movie 640 480, 320 240 Text 3456 2592, 2048 1536
Lens Construction Zoom Magnification
Appendices
Recording Media 3456 2592 3456 2304 2592 2592 3072 2304 2592 1944 2048 1536 1728 1296 1280 960 640 480 Recording Still Image File Format Multi-Picture Movie Compression Format Other Major Shooting Functions Other Major Playback Functions Interface Video Signal Format Power Supply Battery Consumption*5 Dimensions Weight Tripod Hole Shape Date Maintain Time Operating Temperature Operating Humidity Storage Temperature Recording Data Capacity
SD memory card, SDHC memory card (up to 32 GB), Internal Memory (approx. 88 MB) N: approx. 1959 KB/Screen, F: approx. 3376 KB/Screen F: approx. 3002 KB/Screen F: approx. 2538 KB/Screen N: approx. 1573 KB/Screen N: approx. 1155 KB/Screen N: approx. 767 KB/Screen N: approx. 581 KB/Screen N: approx. 452 KB/Screen N: approx. 110 KB/Screen JPEG (Exif Ver. 2.21)*2 Compliant with CIPA DC-007-2009 Multi Picture Format AVI (Open DML Motion JPEG Format Compliant) JPEG Baseline Format Compliant (Still image, movie) Continuous mode, Self-timer (operation time: approx. 10 seconds, approx. 2 seconds, Custom), Interval shooting (shooting interval: 5 seconds to 1 hour, in increments of 5 seconds)*3, Color bracket, Focus bracket, AE/AF target shift, Histogram display, Grid guide display, Electronic level Thumbnail view, Enlarged view (maximum 16), Resize, Level Compensation, White Balance Compensation, Skew Correction, Trim, Flag Function, Slideshow, DPOF USB2.0 (High-Speed USB) Mini-B, Mass storage-compatible*4, AV output 1.0Vp-p (75 ) NTSC, PAL Rechargeable Battery (DB-70): 3.6 V Usage time of DB-70: approx. 290 pictures (When [LCD Auto Dim] is set to [On]*6) 101.5 mm (W) 58.3 mm (H) 29.4 mm (D) (excluding projecting parts) Camera: approx. 185 g (excluding battery, SD memory card, and strap) Accessories: approx. 23 g (battery and strap) 1/4-20UNC Approx. 1 week 0C to 40C 85% or less -20C to 60C
Appendices 10
*1 The picture quality mode that can be set varies depending on the image size. *2 Compatible with DCF and DPOF. DCF is the abbreviation for Design rule for Camera File system, a JEITA standard. (Full compatibility with other devices is not guaranteed.) *3 When the flash is set to [Flash Off]. *4 Mass storage mode is supported by Windows 2000, Windows XP, Windows Vista, Mac OS 9.0 - 9.2.2, and Mac OS X 10.1.2 - 10.5.7. *5 The number of remaining shots is based on the CIPA standard and may vary depending on usage conditions. This is for reference only. *6 You can take approximately 270 shots when [LCD Auto Dim] is set to [Off].
231
Number of Images That Can Be Stored

The following table shows the approximate number of images that can be recorded in the internal memory and onto an SD memory card at various image size and picture quality settings.
Mode Picture Quality/ Size Internal 1 GB Memory 2 GB 4 GB 8 GB 16 GB 32 GB
SCENE (other than Text Mode) EASY
R Q 5
(Continuous Mode)
(When [Focus] is set to [Multitrgt AF])
SCENE (Text Mode)
F3456(9M) N3456(9M) F3:2(8M) F1:1(6M) N3072(7M) N2592(5M) N2048(3M) N1280(1M) N640(VGA) F3456(9M) N3456(9M) F3:2(8M) F1:1(6M) N3072(7M) N2592(5M) N2048(3M) N1280(1M) N640(VGA) 3456 2592 2048 1536
640 480 (15 Frames/Sec) 640 480 (30 Frames/Sec) 320 240 (15 Frames/Sec) 320 240 (30 Frames/Sec)
24 42 27 33 53 72 109 175 705 23 39 26 31 48 64 90 133 312 42 109

1 min 42 s 51 s 4 min 19 s 2 min 12 s
266 457 299 353 570 775 1184 1888 7553 255 425 285 333 521 686 974 1438 3357 457 1184
18 min 20 s 9 min 15 s 46 min 19 s 23 min 42 s
539 931 608 714 1159 1576 2363 3840 15359 516 865 579 675 1059 1397 1981 2926 6827 931 2363
1058 1828 1195 1403 2277 3094 4640 7541 30159 1014 1699 1138 1326 2080 2743 3892 5746 13407 1828 4640
76 min 41 s 38 min 41 s 193 min 41 s 99 min 8s
2163 3737 2442 2868 4654 6325 9486 15415 61643 2073 3474 2327 2710 4253 5606 7956 11745 27404 3737 9486
149 min 40 s 75 min 31 s 378 min 2s 193 min 30 s
4335 7487 4893 5746 9324 12671 19005 30882 123489 4152 6960 4662 5430 8520 11231 15940 23530 54898 7487 19005
8695 15020 9815 11527 18704 25418 38125 61951 247716 8330 13962 9352 10893 17091 22529 31976 47202 110125 15020 38125
601 min 28 s 303 min 31 s 1519 min 7s 777 min 37 s
3
Appendices 10
R(M-Cont Plus(9M)) R(M-Cont Plus(2M))
N3456(9M) N1728(2M) N640(VGA)
42 143 705
457 1548 7553
931 3072
1828 6033
3737
7487
15020
12332 24706 49561
15359 30159 61643 123489 247716
(Speed Cont)
232
Note --------------------------------------------------------------------------------------------- The maximum recording time is the estimated total recording time. The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB. The maximum number of consecutive shots that can be taken using continuous mode is 999. When the number of remaining shots is 1000 or more, 999 is displayed on the picture display. The maximum numbers of shots for M-Cont Plus (2M)/M-Cont Plus (9M) and Speed Cont are the estimated total numbers of shots that can be recorded. The maximum number of shots that can be taken consecutively at one time is 30 for M-Cont Plus (2M) and 15 for M-Cont Plus (9M) and 120 for Speed Cont. The maximum number of shots for Multi-trgt AF is the estimated total number of shots that can be recorded. The number of shots that can be recorded at one time is 7. When the number of remaining shots is 9999 or more, 9999 is displayed on the picture display. The number of remaining shots displayed on the picture display may differ from the actual number of shots, depending on the subject. Movie recording time and the maximum number of still pictures may vary depending on the capacity of the recording destination (internal memory or SD memory card), shooting conditions, and the type and manufacturer of the SD memory card. A high speed memory card is recommended when shooting for long periods.
233
Appendices 10
Defaults Settings/Functions Whose Defaults Are Restored When the Camera Is Turned Off
Turning the camera off may reset some function settings to their defaults. The table below indicates whether or not the function is reset to its default when the camera is turned off.
O : setting is saved : setting is reset Function Default Settings Picture Quality/Size O N3456(9M) Density O Normal Size (Text Mode) O 3456 (9M) Movie Size O 640 Frame Rate O 30 Frames/Sec Focus O Multi AF Pre-AF O Off Exposure Metering O Multi Image Settings O Standard Flash Exposure Compensation O 0.0 Dynamic Range Expansion O AUTO Plus Normal Shooting O Off Auto Bracket O Off Time Exposure O Off Custom Self-Timer O Pictures: 2 Pics, Interval: 5 Sec Interval Shooting 0 Sec. Camera Shake Correction O On Slow Shutter Limit O Off Date Imprint O Off Exposure Compensation O 0.0 White Balance O Multi-P AUTO ISO Setting O Auto Macro O Macro Off Flash O Auto Self-Timer Self-Timer Off Volume Adjustment O -
Shooting
10
Playback
234
Appendices
Setup
O : setting is saved : setting is reset Function Default Settings LCD Brightness O Reg. My Settings O Step Zoom O Off Set Fn Button O Macro Target ADJ Button Setting 1 O Exposure Comp. ADJ Button Setting 2 O White Balance ADJ Button Setting 3 O ISO ADJ Button Setting 4 O Quality ISO Auto-High Settings O AUTO 400 AF Auxiliary Light O On Operation Sounds O All Volume Settings O (Medium) LCD Confirmation Time O 0.5 seconds Auto Power Off O 5 Min. LCD Auto Dim O On Digital Zoom Image O Normal Grid Guide Display Options O Level Setting O Display Shooting Info. Display Frame O Off Minimum Distance O Show Auto Rotate O On Card Sequence No. O Off Date Settings O (*1) Language/N O (*1) Video Out Mode O
(*1)
The default setting varies depending on where you purchased the camera.
235
Appendices 10
Using Your Camera Abroad

Battery Charger (Model BJ-7) The battery charger can be used in regions with a current of 100-240V, 50Hz/60Hz. If you are going to travel to a country that uses a different shaped wall outlet/plug, please consult your travel agent on a plug adapter suitable for wall outlets in your country of destination. Do not use electrical transformers. It may damage the camera. Warranty This product was manufactured for use in the country in which it was purchased. The warranty is only valid in the country in which the camera was purchased. Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for servicing the product locally or bearing the expenditure incurred therefore. Playback on Television in Other Regions Playback is possible on televisions (or monitors) equipped with a video input terminal. Please use the AV cable provided. This camera is compatible with both NTSC and PAL television formats. Set the video format on the camera to match that of the television you are using.
When you go abroad, set your camera to the local video format.
10
236
Appendices
Cautions on Use
Cautions on Use
This product was manufactured for use in the country in which it was purchased. The warranty is only valid in the country in which the camera was purchased. Should the product fail or malfunction while you are abroad, the manufacturer assumes no responsibility for servicing the product locally or bearing the expenditure incurred therefore. Be sure not to drop or apply any sudden force to the camera. While you are carrying the camera, be careful not to hit it against other objects. Take special care to not hit the lens and picture display. Firing the flash consecutively may heat the firing unit. Do not fire it consecutively more than necessary. Do not touch the flash and keep foreign objects away from the firing unit. Doing so can cause burns and fires. Do not fire the flash near eyes. It could cause visual impairment (particularly for infants). Do not fire the flash near the driver of a vehicle to avoid causing accidents. The battery may become hot after extended use. Touching the battery immediately after use could result in burns to your fingers. If the picture display or panel is exposed to sunlight, they may become washed out and images may become hard to view. The picture display and panel may contain some pixels that do not remain lit up continually in part or at all. Also, the brightness may become uneven because of the characteristics of LCDs. These are not failures. Do not forcefully press the surface of the picture display. In an environment where the temperature changes suddenly, condensation may occur in the camera, resulting in troubles such as fogging of the glass surface or malfunctions of the camera. If this occurs, place the camera in a bag to slow the temperature change as much as possible. Take it out of the bag after the temperature difference from the atmosphere has decreased to a fairly small amount. If condensation occurs, remove the battery and memory card, and wait until the moisture has dried before using the camera. To avoid damaging the connectors, do not put any objects into the cameras microphone or speaker holes. Do not get the camera wet. Do not operate the camera with wet hands. This can result in malfunction or an electrical shock. Before taking any important pictures (such as at weddings, on trips abroad, etc.), test the camera to check operation and ensure proper functioning. We recommend that you keep this manual and spare battery on hand.
237
Appendices 10
Conditions in which condensation may easily occur:------------------------- When the camera is moved to an environment where the temperature differs greatly. In humid places. In a room immediately after being heated, or when the camera is exposed directly to cooled air from an air-conditioner or another similar appliance.
10
238
Appendices
Care and Storage

Care
Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will suffer. When dust or dirt does get on the lens, do not touch it directly with your fingers, and either use a blower (available in stores) to blow it off, or a soft cloth to gently dust it off. After use at the beach or around chemicals, wipe it off particularly carefully. In the unlikely event that your camera fails to work properly, please consult your Ricoh Repair Center. There are high voltage circuits in this camera. As this is dangerous, do not dismantle this camera under any circumstances. Do not get volatile substances, such as thinner, benzene, or pesticides on your camera. This may cause a change in quality, paint to peel, etc. As the surface of the picture display is easily scratched, do not rub hard objects against it. Clean the surface of the picture display by wiping gently with a soft cloth containing a small amount of display cleaner (that does not contain organic solvents) sold in stores.
Use and Storage

Please avoid using or storing your camera in the following kinds of places, as this may damage the camera. In high heat and humidity, or where there is severe change in temperature or humidity. Places with a lot of dust, dirt or sand. Places with severe vibration. Places where it is in direct contact with vinyl or rubber products or chemicals, including mothballs or other insect repellent, for long periods of time. Places with strong magnetic fields (near a monitor, transformer, magnet, etc.). Remove the battery if you are not going to use the camera for a long period of time.
Appendices
Precautions regarding care of your camera

1. Be sure to turn the power off. 2. Remove the batteries before caring for your camera.
10
239
Warranty and Servicing

1. This product is backed by a limited warranty. During the warranty period mentioned in the Warranty supplied with your camera, any defective parts will be repaired free of charge. In the event of a camera malfunction, contact the dealer from which you purchased the camera or your nearest Ricoh Repair Center. Please note that you will be not be reimbursed for the cost of bringing the camera to the Ricoh Repair Center. 2. This warranty does not cover any damage resulting from: 1 failure to follow the instructions in the instruction manual; 2 repair, modification or overhaul not conducted by an authorized service center listed in the instruction manual; 3 fire, natural disaster, act of God, lightning, abnormal voltage, etc.; 4 improper storage (noted in the Camera User Guide), leaking of battery and other fluids, mold, or otherwise insufficient care of the camera. 5 submergence in water (flooding), exposure to alcohol or other beverages, infiltration of sand or mud, physical shock, dropping of the camera, or pressure on the camera, and other unnatural causes. 3. After the warranty period has passed, you will be liable for all repair fees, including those incurred at an authorized service center. 4. You will be liable for all repair fees, even within the warranty period, if the warranty card is not attached or if the distributors name or the purchase date have been changed or are not indicated on the card. 5. Expenses for overhaul and thorough inspection by special request of the customer will be charged to the customer, whether or not they are incurred during the warranty period. 6. This warranty only applies to the camera and not to the accessories, such as the case and strap, nor does it apply to the battery and other consumables provided. 7. Any consequential damages arising from failure of the camera, such as expenses incurred in taking pictures or loss of expected profit, will not be reimbursed whether they occur during the warranty period or not. 8. The warranty is only valid in the country in which the camera was purchased. * The above provisions refer to repairs offered free of charge, and do not limit your legal rights. * The intention of the above provisions is also described in the warranty card provided with this camera. 9. Parts essential to the servicing of the camera (that is, components required to maintain the functions and quality of the camera) will be available for a period of five years after the camera is discontinued. 10. Please note that if the camera is seriously damaged by flooding, submergence, infiltration of sand or mud, violent shocks or dropping, it may not be repairable, and restoration to its original condition may be impossible.
10
240
Appendices
Note --------------------------------------------------------------------------------------------- Before sending the camera in for repair, check the battery and read the instruction manual again to ensure proper operation. Some repairs require a significant amount of time to be completed. When sending the camera to a service center, please include a note which describes the defective part and the problem as precisely as possible. Remove all accessories not related to the problem before sending the camera to the service center. This warranty does not apply to data stored on an SD memory card or in internal memory.
INFORMATION TO THE USER

USA FCC Part15 Class B
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, then user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. (FCC 15.21) Properly shielded and grounded cables and connectors must be used for connection to a host computer in order to comply with FCC emission limits. (FCC 15.27) An AC adapter with a ferrite core must be used for RF interference suppression.
COMPLIANCE INFORMATION STATEMENT

Product Name: DIGITAL CAMERA Model Number: CX2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RICOH AMERICAS CORPORATION 5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899
Note to Users in Canada

Note: This Class B digital apparatus complies with Canadian ICES-003
Remarque Concernant les Utilisateurs au Canada

Avertissement : Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
241
Appendices 10
Index
A
ADJ Button Setting 1, 2, 3, 4 ..... 176 ADJ./OK Button ............. 16, 62, 131 AE Lock ....................................... 68 AE/AF Target Shift ...................... 64 AF Auxiliary Light ................ 15, 179 Auto Bracket .............................. 112 Auto Focus (AF) ........................ 103 Auto Power Off .................... 29, 183 Auto Resize ............................... 185 Auto Rotate ............................... 191 Auto Shooting Mode.................... 34 AV Cable ............................. 12, 163 AV Output Terminal ............. 16, 163 AVI file ......................................... 94
Density .........................................82 Digital Zoom.................................40 Digital Zoom Image....................185 Direct Print .................................197 Discreet Mode..............................74 DISP. Button ..........................16, 56 DL-10 .................................204, 206 DPOF .........................................159 Dynamic Range Double Shot Mode ..................................................84 Dynamic Range Expansion..........85
E
Easy Shooting Mode (EASY).......37 Enlarged View..............................50 Error Messages..........................221 Export Still Images .....................134 Exposure Compensation............124 Exposure Metering.....................108
B
Backlighting ............................... 124 Battery ......................................... 22 Battery Charger ..................... 12, 25 Battery Level Indication ............... 21 Battery/Card Cover................ 16, 26
F
Flag Function Display ................142 Flag Function Setting .................140 Flash ................................15, 16, 43 Flash Exposure Compensation ................................................111 Fn (Function) Button ..............16, 66 Focus .........................................103 Focus Bracket (FOCUS-BKT)....115 Format [Card].............................168 Format [Internal Memory]...........169 Frame Rate ..................................95
C
Camera shake ..................... 33, 121 Camera Shake Correction ......... 121 Card Reader .............................. 215 Card Sequence No. ................... 193 CD-ROM.............................. 13, 206 Charging...................................... 25 Color Bracket (CL-BKT) ............ 114 Continuous Mode ........................ 87 Copy to Card from Internal Memory ............................................... 158 Custom Self-Timer .................... 118
G
Grid Guide Display.......................56 Grid Guide Display Options .......188
H
Handstrap ....................................12 High Contrast B&W......................75 High Sens ....................................74 Histogram Display........................60
D
Date Imprint ............................... 123 Date Settings ....................... 31, 194 DC Software .............................. 211 Delete .......................................... 52 Delete Button......................... 16, 52
I
Image Settings ...........................109 Internal Memory .....................23, 47
242
Interval Shooting ....................... 119 Irodio Photo & Video Studio ............................... 206, 210, 212 ISO Auto-High Settings ............. 178 ISO Setting ................................ 128
P
PictBridge...................................197 Picture display........................16, 18 Picture Quality/Size....................101 Playback Button .....................16, 46 Playback Menu ..........................138 Playback Mode ......................28, 46 Plus Normal Shooting ..................86 Portrait ...................................74, 77 POWER Button ............................15 Pre-AF........................................107 Printing.......................................197 Protect........................................154
L
Landscape................................... 74 Language/N .................... 30, 195 LCD Auto Dim ........................... 184 LCD Brightness ......................... 170 LCD Confirmation Time ............. 182 Lens............................................. 15 Lens Cover .................................. 15 Level Compensation.................. 147 Level Indicator ..................... 58, 187 Level Setting........................ 58, 187
R
Rechargeable Battery ................................12, 22, 25, 26 Recover File...............................162 Reg. My Settings........................171 Resize ........................................143 Restore Defaults ........................130
M
Macro .................................... 16, 41 Macro Target ................. 66, 67, 174 Manual Focus (MF) ................... 105 M-Cont Plus (2M) ........................ 90 M-Cont Plus (9M) ........................ 88 MENU Button ...... 16, 100, 139, 166 Microphone.................................. 15 Miniaturize ............................. 75, 79 Minimum Distance..................... 190 Mode Dial .............................. 15, 17 Movie Mode................................. 94 Movie Size ................................. 101 MP File ........................ 92, 104, 132 Multi-trgt AF............................... 104 My Settings Mode (MY)............... 83
S
Scene Mode (SCENE) .................74 SD Memory Card .............23, 26, 47 Self-Timer ....................................45 Self-timer Button ....................16, 45 Self-Timer Lamp ....................15, 45 Set Fn Button .............................174 Setup Menu................................165 Shooting Info. Display Frame.....189 Shooting Menu.............................97 Shutter Release Button..........15, 32 Skew Correct Mode ...............75, 81 Skew Correction.........................152 Slide Show .................................157 Slow Shutter Limit ......................122 Speaker................................16, 131 Speed Cont ..................................92 Sports...........................................74 Step Zoom .................................173 Synchro-Monitor Mode.................56
N
Night. Port. .................................. 74 Nightscape .................................. 74 Number of images that can be stored ..................................... 232 Number of shots you can take..... 22
O
Operation Sounds ..................... 180
T
Text Mode ....................................75
243
Thumbnail View ........................... 48 Time Exposure .......................... 117 Trim ........................................... 144 Tripod Screw Hole....................... 16
U
USB Cable ................. 12, 198, 212, 213, 217 USB Driver ................................ 206 USB Terminal ................. 16, 198, 213, 214, 217
V
Video Out Mode ........................ 196 VM-1.................................. 219, 220 Volume Settings ........................ 181
W
White Balance ........................... 126 White Balance Bracket (WB-BKT)............................... 113 White Balance Compensation ... 150 White Saturation Highlights Display ..................................... 57 WIA Driver ................................. 206
Z
Zoom ........................................... 39 Zoom Lever ........................... 15, 39 Zoom Macro .......................... 74, 78
244
Telephone Support Numbers in Europe

UK Deutschland France Italia Espaa (from within the UK) (from outside of the UK) (innerhalb Deutschlands) (auerhalb Deutschlands) ( partir de la France) (en dehors de la France) (dallItalia) (dallestero) (desde Espaa) (desde fuera de Espaa) 02073 656 580 +44 2073 656 580 06331 268 438 +49 6331 268 438 0800 88 18 70 +33 1 60 60 19 94 02 696 33 451 +39 02 696 33 451 91 406 9148 +34 91 406 9148
http://www.service.ricohpmmc.com/
From environmental friendliness to environmental conservation and to environmental management

Ricoh is aggressively promoting environmentfriendly activities and also environment conservation activities to solve the great subject of management as one of the citizens on our precious earth. To reduce the environmental loads of digital cameras, Ricoh is also trying to solve the great subjects of Saving energy by reducing power consumption and Reducing environment-affecting chemical substances contained in products.
If a problem arises
First of all, see Troubleshooting (GP.221) in this manual. If the issues still persist, please contact a Ricoh office.
Ricoh Offices RICOH COMPANY, LTD. 3-2-3, Shin-Yokohama Kouhoku-ku, Yokohama City, Kanagawa 222-8530, Japan http://www.ricoh.com/r_dc/ RICOH AMERICAS CORPORATION 5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A. 1-800-22RICOH http://www.ricoh-usa.com/ RICOH INTERNATIONAL B.V. (EPMMC) Oberrather Str. 6, 40472 Dsseldorf, GERMANY (innerhalb Deutschlands) 06331 268 438 (auerhalb Deutschlands) +49 6331 268 438 http://www.ricohpmmc.com/ RICOH UK LTD. (PMMC UK) (from within the UK) 02073 656 580 (from outside of the UK) +44 2073 656 580 RICOH FRANCE S.A.S. (PMMC FRANCE) ( partir de la France) 0800 88 18 70 (en dehors de la France) +33 1 60 60 19 94 RICOH ESPANA, S.A. (PMMC SPAIN) (desde Espaa) 91 406 9148 (desde fuera de Espaa) +34 91 406 9148 RICOH ITALIA S.p.A. (PMMC ITALY) (dallItalia) 02 696 33 451 (dallestero) +39 02 696 33 451 RICOH ASIA PACIFIC OPERATIONS LIMITED 21/F, One Kowloon, 1 Wang Yuen Street, Kowloon Bay, Hong Kong About Irodio Photo & Video Studio North America (U.S.) (Toll Free) +1-800-458-4029 Europe UK, Germany, France and Spain: (Toll Free) +800-1532-4865 Other Countries: +44-1489-564-764 Asia +63-2-438-0090 China +86-21-5385-3786 Business hours: 9:00 AM to 5:00 PM
Ricoh Company, Ltd. Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo 104-8222, Japan 2009 September
EN USA GB GB AE AE
*L755 2971C*
Printed in China

Ricoh CX2

Uploaded by

Copyright:

Available Formats

Ricoh CX2

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ricoh CX2

Uploaded by

Copyright:

Available Formats

Camera User Guide

Exemption from Liability Warranty

Danger Warning Caution

Observe the following precautions to ensure safe use of this equipment.

Observe the following precautions to ensure safe use of this unit.

Using the Manuals

Business hours: 9:00 AM to 5:00 PM

Packing List ................................................................................. 12

Basic Shooting ............................................................................ 32

Playing Back Images ................................................................... 46

Changing the Display with the DISP. Button ............................... 56

Using the Fn (Function) Button

Shooting Mode Types

Scene Mode (SCENE) ................................................................ 74

Movie Mode (3) ......................................................................... 94

About the Shooting Menu ............................................................ 97

Picture Quality Mode/Image Size .............................................. 101

Focusing Modes ........................................................................ 103

Flash Exposure Compensation ................................................. 111 Bracket Shooting ....................................................................... 112

Playing Back Movies ................................................................. 131 Playing Back MP Files............................................................... 132

About the Playback Menu ......................................................... 138

Correcting the Image Brightness and Contrast ......................... 147

Restoring Deleted Files ............................................................. 162 Viewing on a Television............................................................. 163

About the Setup Menu............................................................... 165

Language Settings .................................................................... 195 TV Playback Method ................................................................. 196

Downloading Images to Your Computer

For Windows ............................................................................. 204

For Macintosh............................................................................ 217

Specifications ............................................................................ 230

USB Cable (Mini B cable)

Handstrap Battery Charger

Camera User Guide

Rechargeable Battery (DB-70)

Battery Charger (BJ-7) Neck Strap (ST-2)

Cable Switch (CA-1)

How to Use the Mode Dial

Mode Dial Symbols and Descriptions

MY1, MY2 My Settings Mode

P.83 P.94 P.74 P.37

Movie Mode Scene Mode

Easy Shooting Mode

Continuous Mode Dynamic Range Double-shot Mode

Still Image Mode

00:00 /00:02 37 REC EC

Shutter butoon : Start

Refer to P.21 P.117 P.45 P.41 P.190

18 Camera Shake Correction P.121

35 Remaining Recording Time P.232 37 Movie Recording Indicator P.94

16 Histogram 17 Date Imprint

Example of Picture Display During Playback

Refer to P.140 P.154 P.159 P.47 P.101 16 10 11 12 13 14 15

Refer to P.101 P.194 P.230 P.122 P.21 -

Number of Playback Files -

F 5.0 1/60 ISO 100 8 10 EV +0.7 G:5,A:2 28 mm 12

Refer to P.86 P.85 P.230 P.122 P.128 P.124 P.108 10 11 12 13 14 15 9

Item Name White Balance / White Balance Compensation Flash Mode

Refer to P.126 P.150 P.43

Battery Level Indication

About the Battery