Chemicals Zetag MSDS Beads Zetag 7593 - 0510
Chemicals Zetag MSDS Beads Zetag 7593 - 0510
Chemicals Zetag MSDS Beads Zetag 7593 - 0510
ZETAG 7593
Revision date : 12.05.2010 Version: 1.1 Page: 1/6 (30499700/SDU_GEN_CA/EN)
2. Hazards Identification
Emergency overview
Signal word: Colour: Appearance: State of matter: Odour: Health: Physical/Chemical hazards:
Potential health effects
CAUTION: ! White to off-white beads solid odourless Contact causes eye irritation, Contact causes skin irritation. Organic powders may be capable of generating static discharges and creating explosive mixtures in air. Handle with caution, Slip hazard when wet., Refer to MSDS Section 7 for Dust Explosion information.
Primary routes of entry: Skin, Eyes, Inhalation, Ingestion Chronic exposure: MAY CAUSE EYE IRRITATION. Repeated or prolonged skin contact can cause drying and cracking of the skin. Inhalation of dust may result in respiratory irritation.
Potential environmental effects
3. Composition/Information on Ingredients
Chemical name Ethanaminium, N,N,N-trimethyl-2-[(1-oxo-2propenyl)oxy]-, chloride, polymer with 2propenamide (9CI) CAS Number 69418-26-4 Content (Weight) 60.0 - 100.0 % Hazardous Y
4. First-aid Measures
Inhalation: Remove to fresh air, if not breathing give artificial respiration. If breathing is difficult, give oxygen and get immediate medical attention. Skin: After contact with skin, wash immediately with plenty of water and soap. Get medical attention if irritation occurs. If clothing is contaminated, remove and launder before reuse. Eyes: Rinse immediately with plenty of water for at least 10 minutes taking care to wash under the eyelids. Immediate medical attention required. Ingestion: Do not induce vomiting. If vomiting occurs naturally, have casualty lean forward to reduce the risk of aspiration. Seek medical attention immediately.
5. Fire-fighting Measures
Suitable extinguishing media: carbon dioxide, dry powder, foam Hazardous combustion products: Carbon and nitrogen oxides. Hazards during fire-fighting: Standard procedure for chemical fires. The product becomes slippery when wet. Restrict pedestrian and vehicular traffic in areas where slip hazard may exist. The product can form an explosive dust/air mixture. For further information, see Section 7 Explosion Hazards. Protective equipment for fire-fighting: Wear self-contained breathing apparatus and chemical-protective clothing.
General advice: As with all industrial chemicals, use good industrial practices when handling. Avoid eye, skin, and clothing contact. Do not inhale. Do not taste or swallow. Use only with adequate ventilation. Protection against fire and explosion: Combustible powder. - Avoid creating dusty conditions. - Grounding is required when emptying into a conductive container. - When flammable solvents are present, the container must be inerted or the system otherwise designed to prevent or contain an explosion. Seek expert advice. In addition, for products packaged in fused-lined (coated) fiber drums, fiber drums with conductive liners, steel drums, steel pails, and Type " C " FIBC (bulk bags), or other conductive the following instructions also apply: - Always ground this package before emptying. The user is responsible for designing the system to handle solid and ensuring proper training of employees in the system's use.
Storage
General advice: Keep container tightly closed in a dry, cool and well-ventilated place. > for industrial use only <
ACGIH
Respiratory protection: Use NIOSH approved respirator as needed to mitigate exposure. Eye protection: Wear safety goggles (chemical goggles) if there is potential for airborne dust exposures. Body protection: Wear chemical resistant gloves and protective clothing. General safety and hygiene measures: Eye wash station and safety shower should be available in immediate work area., Select additional protective equipment based upon potential for exposure.
Substances to avoid: Strong oxidizing agents., (may degrade polymer) Possibility of Hazardous Reactions: No hazardous reactions known. Hazardous decomposition products: Carbon oxides. Hydrogen. Ammonia.
LD50 / Oral / rat: > 2,000 mg/kg Low oral toxicity., (based on similar product)
Skin irritation:
Carcinogenicity:
no data available Bioaccumulation: no data available Other ecotoxicological advice: This product contains polymer(s) that may be toxic to aquatic organisms when tested in pure (distilled) water. Toxicity is greatly reduced by particles in natural water.
Not classified as a dangerous good under transport regulations. Not classified as a dangerous good under transport regulations. Not classified as a dangerous good under transport regulations.
Workplace Hazardous Materials Information System (WHMIS Classification): This product is WHMIS controlled. D-2B Materials Causing Other Toxic Effects - Toxic material
Chemical Weapons Convention: This product does not contain any component(s) listed under the Chemical Weapons Convention Schedule of Chemicals.
Due to the merger of CIBA and BASF Group all Material Safety Data Sheets have been reassessed on the basis of consolidated information. This may have resulted in changes of the Material Safety Data Sheets. In case you have questions concerning such changes please contact us at the address mentioned in Section I. END OF DATA SHEET