The document describes glass spinner flowmeters that are used to measure the flow rate of single-phase non-pulse fluids. They consist of a tapered glass pipe with a floater that moves up and down based on the fluid flow rate. The position of the floater indicates the flow on a scale. Models are available for pipe diameters from 4 to 100mm and can measure flow rates from 1 to 2500 liters/hour or 0.25 to 1000 cubic meters/hour depending on the model. Materials are suitable for measuring acids, alkalis and other corrosive fluids.
The document describes glass spinner flowmeters that are used to measure the flow rate of single-phase non-pulse fluids. They consist of a tapered glass pipe with a floater that moves up and down based on the fluid flow rate. The position of the floater indicates the flow on a scale. Models are available for pipe diameters from 4 to 100mm and can measure flow rates from 1 to 2500 liters/hour or 0.25 to 1000 cubic meters/hour depending on the model. Materials are suitable for measuring acids, alkalis and other corrosive fluids.
The document describes glass spinner flowmeters that are used to measure the flow rate of single-phase non-pulse fluids. They consist of a tapered glass pipe with a floater that moves up and down based on the fluid flow rate. The position of the floater indicates the flow on a scale. Models are available for pipe diameters from 4 to 100mm and can measure flow rates from 1 to 2500 liters/hour or 0.25 to 1000 cubic meters/hour depending on the model. Materials are suitable for measuring acids, alkalis and other corrosive fluids.
The document describes glass spinner flowmeters that are used to measure the flow rate of single-phase non-pulse fluids. They consist of a tapered glass pipe with a floater that moves up and down based on the fluid flow rate. The position of the floater indicates the flow on a scale. Models are available for pipe diameters from 4 to 100mm and can measure flow rates from 1 to 2500 liters/hour or 0.25 to 1000 cubic meters/hour depending on the model. Materials are suitable for measuring acids, alkalis and other corrosive fluids.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
Glass spinner flowmeter
LZB/LZJ series glass spinner flowmeters
Summary LZB/LZJ series glass spinner flowmeters are widely used in chemical industry, petroleum, light industry, medicine, environment protection, food, measuring, testing and scientific research institutes.They are used to measure the flow rate of single-phase non pulse fluid (liquid or gas). LZB/( )F/LZJ-( )F series corrosion resistant glass spinner flowmeters have a good corrosion resistance, and can be used to measure acid (except hydrofluoric acid), alkali, oxidizer and other corrosive gasses or liquid. They are suitable for chemical industry, pharmacy, papermaking, sewage disposal etc. A-Floater S-Lift force G-Weight A S G Reading position
P01-02 Principle & Structure The flowmeter is mainly composed of a Sharp edge c yli ndrical floater Reading positio Reading positio Bal l floate r Reading positio Reading positio
piece of taper glass pipe with bigger bottom and smaller top and a floater moving up and down along with the fluid flow(Fig.3).When the fluid flows across the taper pipe from bottom to top, the floater rises under the lift force "S" on the floater due to the fluid dynamic energy and the fluid buoyancy force "A". When the sum of the lift force "S" and the buoyancy force "A" is equal to the floater weight "G", the floater is in equilibrium and stable at a certain height. The scale on the taper pipe indicates the fluid flow.
Reading positio
Fig.2 The taper pipe of LZB/LZB-( )F flowmeter is a pipe with smooth inner wall (See Fig.4). For the flowmeter with the bore larger than DNl5, the floater moves up and down along the guide rod and remains stable ;There are three guiding edges on the inner wall of the taper pipe of LZJ/LZJ-()F flowmeter to keep the floater stable (See Fig.5).The flowmeter with the bore smaller than DNl0 adopts hose connection, is equipped with needle flow control valve;The flowmeter with the bore larger than DN15 adopts flanged connection.
Cast iron with the Cast iron with Cast iron with Cast iron with inner lining of Poly- the inner lining a n t i - c o r r o s i v e the inner lining propylene plastics of fluoroplastics paint inside of fluoroplastics Polypropylene plastics Fluoroplastics Fluorine rubber Cast iron Fluoroplastics
Material of flangefloaterguide rodbearing plate and bolts is stainless steel 1Cr18ni9Ti ,model is of LZB-( )B. Choosing 316 for material touching the fluid,the model should be LZB-( )B0 which can be ordered as required. Choosing stainless steel with inner lining of PTFE,the model should be LZB-( )BF(316 is B0F) which can be ordered as required.
All PTFE(DN3DN10) LZB-()F4
Material of basefloaterneedle valve is PTFE, bearing plate and screws use stainless steel.
