Globalpmc - Doc - Rev 4

Global PMC (Private) Limited
The Project Management Consultants
Company Profile
Global Project Management Consultants (Private) Limited First Floor, B -168 Block '2' Gulshan-e-Iqbal Allama Shabir Ahmed Usmani Road, Near Gulshan Chorangi, Karachi-75300, Pakistan Phone #: 9221-34987962, 34221694
GPMC profile (Rev. 1) 16-05-12 Page 1 of 20
Table of Contents
S. NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 INTRODUCTION
Contents
Page No.
3 3 3 4 4 4 4 4 4 5 7 12 12
CONTACT INFORMATION OUR PHILOSOPHY OUR VISION OUR MISSION OUR VALUES OUR STRENGTH OUR CORPORATE GOVERNANCE OUR CORE COMPETENCY OUR EXPERIENCE MAJOR PROJECTS HANDLED BY OUR TEAM MEMBERS OUR TECHNICAL LIBRARY OUR ENGINEERING RESOURCES
GPMC profile (Rev. 1) 16-05-12
Page 2 of 20
1) INTRODUCTION
Global Project Management Consultants Private Limited was incorporated in July 2010, though a young entity its team members (director & key persons) have in-depth capabilities of providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, alternate energy, sugar, textile industry, construction supervision, operation & maintenance, annual turnaround of plants, regulatory compliance audit, pre-shipment inspection, HAZOPs, safety audits, feasibility studies, engineering audits & conservations, effluent treatment environmental studies and Facility Management Services. Our key team members have been the main contributors with Oil & Gas Regulatory Authority of Pakistan (OGRA) in instituting regulatory compliance audit system in Pakistan for LPG production, storage & bottling plants. Our team members have also been involved in almost all the main projects of Refineries, Petrochemical & Pipeline projects of Pakistan and some members have extensive international experience. The Global PMC (Private) Limiteds team mission is to become the prime & leading consultancy focused on providing Project Management, Regulatory Compliance and Safety Audit and technical evaluation Services to the upstream & downstream oil & gas, petrochemical, energy and other engineering industries. From various platforms, our team members have provided services to different companies during the planning and development phase of projects. Our team members clientele includes national & international companies for small to large scale projects.
2) CONTACT INFORMATION Global Project Management Consultants (Private) Limited First Floor, B -168 Block '2' Gulshan-e-Iqbal Karachi-75300, Pakistan Phone #: 9221-34987962, 34221694 Email: contact @globalpmc.com.pk Web: www.globalpmc.com.pk 3) OUR PHILOSOPHY
Global PMC has eyed on highly dedicated and professional attitude towards achieving clients target and in order to materialize truly the development of a highly productive engineering industry with following criteria: Timely completion with quality meeting international industry standards, best engineering practices and safety standards. Economic efficiency Preservation of the environment.
Page 3 of 20
4) OUR VISION
Contribution in the development of industries with excellence.
5) OUR MISSION
Becoming an active participant and imperative organization as a global player in the industry.
6) OUR VALUES
Act with integrity, loyalty and honesty. Focus on customer success. Create safe and health-conscious work environment.
7) OUR STRENGTH
Our management and technical team is group of highly skilled professionals who are dedicated and committed for achieving the best results. Technical Team with proven track record.
8) OUR CORPORATE GOVERNANCE

At Global PMC, we dedicate ourselves to earning the trust of our clients, employees, suppliers and customers by fostering a culture that emphasizes compliance with the law and ethical business behavior and by adopting strong principles of corporate governance, our constituents can feel confident about their association with Global PMC. The cornerstone of our compliance program is our Business Responsibilities of all Global PMC Employee. We apply strict ethical standards to our financial audit practices. Our system of corporate governance based on board of directors
9) OUR CORE COMPETENCY

Project Management Services (PMC) Complex process simulation model development FEED Development Detail Engineering Procurement Services Site Supervision Feasibility Studies, Safety & Engineering Audits and Conservations Regulatory Compliance Audits, industry codes and review of complete design package for Third Party appraisal. Inspections & Witness Testing Asset evaluations
Page 4 of 20
10) OUR EXPERIENCE

The Global PMC (Private) Limiteds team mission is to become the prime & leading consultancy focused on providing Project Management, Regulatory Compliance and Safety Audit and technical evaluation Services to the upstream & downstream oil & gas, petrochemical and other engineering industries. From various platforms, our team members have provided services to different companies during the planning and development phase of projects. Our team members clientele includes national & international companies for small to large scale projects. Our team members have provided services to following clients from various platforms:
Major Clients inside Pakistan

Oil & Gas Regulatory Authority (OGRA). Oil & Gas development corporation Limited (OGDCL). BP Pakistan Exploration & Production Inc. (BPP) Eni Pakistan Ltd MOL Pakistan Oil & Gas Co B.V OMV (PAKISTAN) Exploration GmbH Pakistan Oil Fields Limited (POL) BHP Petroleum (Pakistan) Pty Ltd Asia Petroleum Limited (APL) Pakistan Petroleum Limited (PPL) Orient Petroleum International Inc. (OPI) China Petroleum Engineering & Construction (GROUP) Corporation (CPECC) Petronas Carigali Byco (Bosicor) Pakistan Ltd. National Refinery Ltd. NRL Pak-Arab Refinery Ltd. PARCO ENAR Petroleum Refining Facility I, II & III (EPRF) Pakistan State Oil Co., Ltd. (PSO) Peoples Steel Mills (PSM) Nimar Chemicals (formerly Ravi chemicals) Hub Power co. (HUBCO) Fauji Oil Terminal (FOTCO) Sui Northern Gas Pipelines Limited (SNGPL) Unilever Pakistan Limited Dalda Pakistan Limited Cactus Fertilizer Heavy Mechanical Complex (HMC) HTG Chemicals Karachi School of Business & Leadership (KSBL)
Page 5 of 20
Major Clients outside Pakistan

Saudi Aramco, KSA Ruwais Refinery, Abu Dhabi UAE Zakum Development Company (Zadco), Abu Dhabi, UAE Adma-Opco, Abu Dhabi UAE Addax Petroleum Development Nigeria Limited, Nigeria Shell Nigeria Exploration & Production Company, Nigeria
Typically, GLOBAL PMC team members have provided the following services to clients:
a) Project Management Consultancy Services

i) ii) iii) Feasibility Studies, Review of FEED and Design Documents. Detail Engineering Design Development/review of contract document for design engineering consultant and construction contractor. iv) Development/review of procurement documents and bid evaluation reports. v) Procurement assistance & sourcing vi) Development/review of Construction documents and bid evaluation reports. vii) Project planning, scheduling and updating progress reports. viii) Coordination with the consultants & construction contractors in all phases of work, review of submittals and all documents pertaining to the project. ix) Monitoring the project cost, cost variations due to changes in work quantum (if required) and other such matters. x) Verifying work progress of Consultants/Contractors invoices. xi) HAZOP & other related studies. xii) Supervision of site works to ensure compliance. xiii) Provide technical liaison between various vendors and Contractor.
b) Regulatory Compliance Audits

i) ii) iii) Preparation of required documents for the verification of regulatory compliance of hydrocarbon production, storage & filling facilities Verification/inspection of production, storage & filling facilities for their regulatory compliance as per OGRAs requirements. Development of comprehensive audit reports and recommendations.
c) Inspections & Asset Valuation

i) ii) iii) iv) v) Pre-shipment inspections Mill/factory, on-site, off-site & stage inspections Witness/performance testing Assets evaluations for owners and as third party. Integrity Management & RBI
Page 6 of 20
d) Technical Trainings
i) Onsite/Offsite training and certifications for: Materials & Metallurgy Welding & Welding Processes Corrosion Inspection Techniques ASME Sec. IX & VIII API-510 Cathodic Protection
e) Engineering Services for Upstream & Downstream Projects:

i) ii) iii) iv) v) vi) vii) viii) ix) x) xi) xii) xiii) xiv) xv) xvi) Pre feasibility, feasibility reports, Conceptual design, Process selection, FEED Process schemes, operations and maintenance philosophy Offsites, utility, relief, blow down, venting/ flaring/ incineration systems Facility upgrades and debottlenecking. Plant, equipment layout & Detailed engineering (piping, civil & E&I) Equipment design (vessels, columns, exchangers, heaters, storage tanks) Piping stress / Pipeline surge analysis. System optimization and conceptual design of Flow & gathering lines. Route reconnaissance, Pipeline alignment drawings & crossings design. Storage tanks, terminal & pumping stations design. Procurement support ( procurement documents & bid evaluations) Vendor documentation review, Factory acceptance testing & inspections Inspection and refurbishment of equipment. Preparation of commissioning manuals for process units, off sites and utilities. Punch list during pre-commissioning & commissioning. Ensure compliance with commissioning procedures during pre-commissioning and commissioning phase.
11) MAJOR PROJECTS HANDLED BY OUR TEAM MEMBERS. From Global PMC platform:
i) ii) iii) iv) v) vi) vii) viii) Complete Designing of 50 Dia Storage Tank for Qurna Field in Iraq (In-Progress) Enhancement of PMG loading capacity at Chackpirana Depot (PSO) (In-Progress) Enhancement of PMG loading capacity at Machike Depot (PSO) (In-Progress) Enhancement of PMG loading capacity at Shikarpur Depot (PSO) (In-Progress) Project Management Services for Gas Sweetening Unit Project (for EPC Bid) for Peoples Steel Mills Pakistan Developing detailed feasibility study on small crude oil topping unit for Mansha Brothers Developed detailed engineering of electrical lighting system of Karachi School of Business & Leadership. KSBL Developed detailed engineering package of 700 KW diesel generating sets
Page 7 of 20
for Karachi School of Business & Leadership. KSBL Developed Process Simulation Model & detailed cost estimate of Gas Dehydration Unit (for EPC Bid) for Peoples Steel Mills Pakistan x) Developed Process Simulation Model & detailed cost estimate of Gas Sweetening unit (for EPC Bid) for Peoples Steel Mills Pakistan xi) Detailed study of hexamine plant for HTG Chemicals xii) Design verification of civil foundations for HUBCO xiii) Design of fire fighting system for Formaldehyde plant for HTG Chemicals xiv) Development of BOQ & Fabrication drawings of Super Structure of Silver Rado-III project of Futehally Chemicals Limited. xv) Stress Analysis of Utility Pipe Rack lines of Byco Refinery Pakistan. xvi) Developed Process Simulation Model of Gas Sweetening Unit (for EPC Bid) for Heavy Mechanical Complex (HMC) Pakistan xvii) Development of Civil & Piping packages for relocation of Edible Oil Refinery xviii) HAZOP study of LPG Unit of Pakistan Refinery Limited. xix) Developed Process & Mechanical Engineering design package of Sulfuric Acid Plant for Cactus Fertilizer Plant xx) Construction site management services for ENAR Petroleum Refining Facility-II. xxi) Development of Process Simulation model for the Kausar field of MKK concession with excel interface for engineers not familiar with Aspen-Hysis software. British Petroleum Pakistan xxii) Facility Management Services for Horizon School (School for Children with special needs) xxiii) Facility Management Services for Aligarh Muslim University Academy xxiv) Development of Detailed Engineering Design package of First Floor of Aligarh Muslim University Academy. ix)
Page 8 of 20
From other Platforms: b) Regulatory Compliance Audits for OGRA of following plants:
i) ii) iii) iv) v) vi) vii) viii) ix) BYCO Oil refining & LPG Production Plant OGDCL Dhakni Gas processing & LPG production Plant. OPI Naimat Gas processing & LPG production Plant PPL Adhi Gas processing & LPG production Plant JJVL Jamshoro LPG production Plant SSGC Air Mix Plant Gawader Progas Port Qasim Terminal & Sarai Gadai Terminal Shell Faisalabad Terminal Akbar Associate Attock Facility
In Addition to above, Regulatory Compliance Audits for various LPG filling & bottling plants all over Pakistan were carried out.
c) As Project Sponsor/Manager, Plant/Site Managers / Project Leads & Engineers Our team members worked on the following projects from various platforms:
Project Sponsor for the inspections of different plants for (OGRA). Our team was the main contributor with OGRA for the development of regulatory compliance audit system in Pakistan. This Project involved collection of technical data / documentation, visual inspection of plant and facilities, assessment of plants for compliance of Codes/ standards and compilation of inspection report. (OGRA). Project Manager for the development of detailed feasibility report (EPRF III), for the relocation of 25,000 bbls deep conversion refinery from USA. Visited USA for the detailed inspection, developed dismantling philosophy, packing, loading, transportation to USA port, sea transportation, re- simulation, re-engineering, refurbishing of equipments, installation, erection, commissioning strategies were developed. The total relocated cost of the plant is $ 85 million. (EPRF-III). Project Manager for the grass root pilot refinery project, this project involves the basic and detailed engineering design of process unit, off sites & utilities, procurement, construction and commissioning. (EPRF-II). Engineering Manager for Design House of British Petroleum Pakistan, This design house consists of more than 32 Engineers & draftsmen and handled hundreds of projects in 2009 (BP Pakistan). Project Manager for the CDU unit revamp project, this project involves the development of Engineering Design Specification (EDS) packages for process unit, off sites and utilities. After revamp the processing capacity of the CDU unit increased from 12,000 bbls/day to 30,000 bbls/day. (Bosicor Pakistan Limited).
Page 9 of 20
Project Manager for the development of FEED for EPC Contractor. This project involves the relocation of unused LPG plant to Dhodak. (OGDCL). Project Manger for the detailed engineering and inspection of LPG Plant for Garhi Hassu (stored unused for last eight years) and assessment of the works required for the rehabilitation and relocation to Dhodak field. (OGDCL). Engineering Manager for ADN-B Wellhead Platform Detailed Design Project (Addax Petroleum Development Nigeria Limited). Engineering Manager for Concept Verification and Detailed Design of H2S Scavenger System at BONGA FPSO (Shell Nigeria). Engineering Manager for Structural Design Projects at Mobils BRT & QIT Facilities under Call-off Contract (Mobil Nigeria) Engineering Manager for ORWS Wellhead Platform Detailed Design Project (Addax Petroleum Development Nigeria Limited). Plant Manager, solely responsible for the operation, maintenance and annual turnaround of the EPRF-I during the first 18 months after the commissioning of grass root pilot refinery capable of processing 3000 bbls/day of local condensate. This pilot project is the first of its kind in the country & providing strategic support to the defense forces of the Pakistan. (EPRF-I). Project Manager for the detailed engineering design, coordination between company and client, monitoring project progress, sourcing of material, coordination of workflow, ensuring budget and milestones are maintained. (Gastec GmbH). Site Manager for management of construction site, contractors, coordination of workflow, ensuring budget and milestones are maintained. (BOBI LPG OGDCL). Project Manager for process, mechanical, piping, electrical and instrument engineers to carry out the front end engineering (FEED) of the project. Developed the time schedule, performance curve and assisted project team to meet the schedule give in the Gantts Chart. Was also involved in the cost estimating (CAPEX & OPEX), planning and scheduling of the Project. (Manzalai-1 MOL Pakistan Limited). Project Manager for technical assessment of various plants and refineries. Projects involved collection and compilation of technical data / documentation, review of process scheme of plants and refineries, visual inspection of plant and facilities, assessment of condition of plant and facilities, estimation of remaining operating life of plant and facilities, assessment of normal replacement / maintenance requirements and revamps projects and identification of non-essential / non productive assets. Team Lead for complete cost estimate of gas gathering system from different wells to the Central Processing Facilities. (Uch Gas Gathering Project OGDCL). Team Lead for complete cost estimate of Dakhni Train II and Dakhni BMR Project. The objective is to increase the processing capacity of the existing plant from 30 MMSCFD to 50MMSCFD. (Dakhni Train II Project OGDCL). Team Lead for complete cost estimate of the grass roots refining complex capable of processing 120,000 bbls/day of crude oil. (Coastal Refinery Project).
Page 10 of 20
Team Lead for detailed design, Procurement, Construction and Commissioning of Light Naphtha Splitter to reduce C5 content from Isomerization unit feed ( Ruwais Refinery, TAKREER). Assistant Engineering Manager for Zamzama North and B & D Tie-in Detail Engineering Works with Zamzama Facility for BHP Pakistan. Assistant Engineering Manager for Saqib-1A EWT Wellhead facility development for Petronas Pakistan. Assistant Engineering Manager for Latif-2 EWT Wellhead facility Development for OMV Pakistan. Assistant Engineering Manager for Conceptual and Front End Engineering Design (FEED) of Kandkhot Gas Purification Facility) for Pakistan Petroleum Limited. Assistant Engineering Manager for Replacement of Condensate Degasser at Rehmat Gas Plant for Petronas Pakistan. Lead Design Engineer for the grass root (3000 bbls/day) pilot refinery project. This project includes basic engineering, detail design, procurement, fabrication of equipments and construction supervision. Pre-shipment inspection for columns, drums, pipe & fittings, boilers, heaters were also performed. (Condensate Processing Facility Project). Lead Design Engineer, responsibilities includes pipeline route selection, survey, alignment drawings, wellhead piping, design, procurement, quality control/ assurance documents etc. (Bobi Early Production Facilities Project of OGDCL). Lead Design Engineer for purification Plant. (OGDCL). Qadirpur Capacity enhancement Project for Gas
Lead Design Engineer for Feed of Adhi LPG/NGL Plant II for PPL Lead Design Engineer for Detail Engineering of Kadanwari Well K-1 & K-6 for LASMO Oil Pakistan Ltd. Lead Design Engineer for Engineering Study for Low Cost Low Pressure Wellhead Systems for LASMO Oil Pakistan Ltd. Lead Process Engineer for Basic and Detailed Engineering of Tajjal 1 Wellhead Extended Well Test Facility Development for OMV. Lead Process engineer for Level 3 ESD and Depressurization system for Satah crude processing facilities located at Zirku Island for ZADCO.
Lead Process Engineer for De bottlenecking study of Yanbu Refinery

Atmospheric columns pump around circuits. Circuits included; Naphtha, Kero, LDO, HDO and Naphtha stabilizer and splitter section. (Saudi Aramco).. Lead Process Engineer for Study of upgrade of North Refinery flare system of Ras Tanura Refinery for Saudi Aramco Lead Process Engineer for Conceptual design of Brazed Aluminum plate type heat exchanger for Berri Gas Plant, Ethane and NGL Unit for Saudi Aramco.
Page 11 of 20
Lead Process Engineer for Zulf Artificial lift Project for Saudi Aramco. Carried out the simulation, rating and evaluation of worlds largest Gas-Oil separation facility. Plant contains large number of separators, de-salters, dehydrators, heat exchangers, pumps, compressors trains, gas dehydration and dew point control system, etc. (Saudi Aramco) Lead Process Engineer for Study of up gradation of Relief system at Ras Tanura Refinery for Aramco. Lead Process Engineer for Detailed design of CO2 pipeline for Kingdom Dry Ice Factory (KDI KSA). Lead Process Engineer for Condensate Processing Facility a pilot refinery to process 3000 BPSD of condensate. Was involved in Conceptual design, detailed design, precommissioning, commissioning and startup phase. ENAR Petrotech Services (Pvt) Limited. Lead Process Engineer for Front End Engineering Design (FEED) and development of surface facilities for Extended Well Testing (EWT) for Manazali 1 for MOL Pakistan Oil and Gas CO. B.V. Lead Process Engineer for Front End Engineering Design (FEED) of Adhi Gas Field to enhance the capacity of existing plant by installing a parallel train for Pakistan Petroleum Limited (PPL). Lead E & I Design Engineer for Kandhkot Field Gas Compression Project of PPL Lead E & I Design Engineer for Qadirpur Gas Compression Project & Tando Allah Yar Development Project of OGDCL Lead E & I Design Engineer for Sinjhoro, Dakhni & Chanda Project of OGDCL Lead E & I Design Engineer for Adhi Lpg / Ngl Plant II Project of PPL
Process Engineer for Capacity enhancement study by relocating Garhi Hassu plant to
process the additional fluids from Dhodak field (OGDCL) Process Engineer for Preliminary Feasibility Study of Tangri & Mazari Gas Fields to Install Gas Sweetening & De-hydration plants for UTPI. Process Engineer for Devel opment of System Curves of Kadanwari Gas Field Gathering lines for LASMO Oil Pakistan Limited (LASMO). Process Engineer for Capacity Enhancement Study of Turk Amine Plant for Union Texas Pakistan Inc. (UTPI). Process Engineer (NRL). for De - Bottlenecking study of Propane Recovery Unit for
Page 12 of 20
12) OUR TECHNICAL LIBRARY

Our team members have been providing Engineering Consultancy services to oil & gas / petrochemicals. We have a huge technical Library, consist of hard & softcopies of International Codes & Standards, Manuals, Technical Books, Procedures, Practices etc.
13) OUR ENGINEERING RESOURCES

Our team members have expertise in using engineering software for projects. Besides world renowned engineering software, our team members also developed software inhouse for engineering applications. We have expertise and access to following softwares: ASPAN Hysys for Process Simulation OLGA for Dynamic Simulation Hydraulics Analysis Korf for Hydraulic Analysis Caesar for Piping Flexibility Analysis Coade Tank 2.5 & E-Tank for Design / Rating of Storage Tank Compress & PV Elite For Design of Pressure Vessel Natasha for Surge Analysis of Pipeline Staad Pro for Structural Analysis Cadpipe, Autocad & Microstation for 3-D Plant Modeling
14) OUR TEAM The present strength of Global PMC (Private) Limited is as under: 1. 2. 3. 4. 5. 6. Process Engineers Mechanical Engineers Electrical / Instrumentation Engineers Civil Engineers Cad Designers / Cad Draftsmen Secretarial / Administration / Accounts 02 02 02 03 06 01
Page 13 of 20
REGISTRATION CERTIFICATE
Page 14 of 20
Page 15 of 20
NATIONAL TAX NUMBER
Page 16 of 20
Page 17 of 20
PAKISTAN ENGINEERING COUNCIL REGISTRATION CERTIFICATE
Page 18 of 20
Page 19 of 20
RESUMES OF KEY PERSONS
Page 20 of 20
GLOBAL PMC (PRIVATE) LIMITED

Name: MATEEN HAMEED Designation: Chairman
EDUCATION Bachelor of Electrical Engineering NED University of Engineering & Technology, Karachi, Pakistan TRAINING / COURSES
PERSONAL PROFILE
Employee No: 0000
1967
Completed numerous study courses on General and Project Management.
EMPLOYMENT HISTORY Present Chairman Global PMC (Private) Limited Karachi, Pakistan Previous Project Manager ETIMAAD Engineering (Private) Ltd Karachi, Pakistan Site Manager / Project Manager Descon Engineering Qatar L.L.C Qatar General Manager - Construction Management Services ENAR Petrotech Services (Private) Limited Karachi, Pakistani Petrofac International Ltd., Sharjah, U.A.E. Senior Project Engineer (On Assignment) Maintenance / Engineering Superintendent Abu Dhabi National Oil Company, Abu Dhabi, U.A.E. Senior Plant Engineer / Operation Engineer National Refinery Limited Karachi, Pakistan EXPERIENCE PROFILE Present
As Chairman in Global PMC (Private) Limited, leading a team of Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries and other related projects.
Feb. 2011 to-date
Nov 2007 Feb. 2011
Mar 2006 Oct 2007
Jun'1986 Feb2006
Dec.1985 - Jun.1986
Jan.1979 - Dec.1985
Mar.' 67 - Dec.' 78
Previous Have more than Forty-four years experience in the field of Design, Project, Engineering Management, plant operation & maintenance which includes Project Estimates, Detailed Engineering, Site/Construction Supervision, Regulatory compliance & safety Audits, Design vetting and Plant Operation & Maintenance of Oil & gas, Power & Petrochemical Plants ensuring timely project completion according to governing codes, standards using latest computer technology.
Page 1 of 3

PERSONAL PROFILE
Employee No: 0000
Provided leadership, direction and timely decisions, Budget, manpower requirements, Institute and conduct all phases of Project Management. Promoted progressive development of inter-personal and communication skills and team building. Developed, implemented overall work plans and control work progress. Evaluated contracts and established appropriate project requirements and authorization limits. Established Hazop review and standard requirements. Recruitment necessary staff for project Set-up organized and supervised project groups for Review P&ID's and detail construction drawings. Developed contracts scope of work, prequalify contractors, review bid proposals, select contractors and award contracts. Prepare detail work plans and monitor work progress. Generate procurement packages, place purchase requisitions, review proposals and select suppliers/vendors. Coordinate total project activities, interface with project support groups and prepare management information reports. Prepare check list for pre-commissioning equipment/plant, issue completion certificates and sign off for acceptance. The work details in projects are as follows: Project Description Electrical lighting system KSBL (Global PMC Pvt. Ltd.) Client Karachi School of Business Responsibility Project Manager for Developed detailed engineering of electrical lighting system of Karachi School of Business & Leadership. KSBL Project Manager for Developed detailed engineering package of 1150 KW diesel generating sets Karachi School of Business & Leadership. KSBL Project Manager for Laundry Project all the activities Dry
Engineering package of 700 KW diesel generating sets (Global PMC Pvt. Ltd.) P&G DRY LAUNDRY PLANT (ETIMAAD Engineering Pvt. Limited) Aisha Steel Mill Project (ETIMAAD Engineering Private Ltd Ethylene Cracker Project (DESCON Engineering). Revamp Project of Crude Distillation Unit (ENAR Petrotech Service Pvt. Ltd).
INSPECTION OF LPG PRODUCTION & BOTTLING PLANTS (ENAR Petrotech Service Pvt. Ltd).
Karachi School of Business
Proctor & Gamble (Nov 07 to Feb 11) Aisha Steel (Nov 07 to Feb 11) TECHNIP FRANCE (Mar' 2006 Oct 2007) National Refinery
Oil & Gas Regulatory Authority(OGRA)
Project Manager for all the activities for Cold Roll Steel Complex (CRSM) Site/Project Manager for all the activities on behalf of subcontractor for the Cold Section of Ethylene Cracker Project (3rd Largest Project of its kind) being built by EPC Contractor Project Manager for all the activities of increasing its throughput from 35,000 BPD to 50,000 BPD.
Project Manager for the inspections of different plants.
QADIRPUR 400MMSCFD PROJECT (ENAR Petrotech Service Pvt. Ltd)
Oil & Gas Development Company Ltd
Condensate Processing Facility Project (EPRF-I) (ENAR Petrotech Service Pvt. Ltd).
Enar Petroleum Refining Facility (Apr. 98 to Dec.02)
Project Manager increasing gas purification capacity from existing 250 to 400 MMSCFD. Include details engineering, procurement assistance, Construction supervision and project management. Project Manager for Procurement of Equipment / Material Detailed Engineering and Construction Supervision Services for processing 3000 barrels / day Condensate Processing Facilities which includes all utilities and development of storage area.
Page 2 of 3

Oil & Gas Development Company Ltd Oil & Gas Development Company Ltd Petrofac International Ltd., Sharjah, U.A.E.
PERSONAL PROFILE
Employee No: 0000
Bobi Early Production Facilities (ENAR Petrotech Service Pvt. Ltd).
Chanda Gas Processing Facility (ENAR Petrotech Service Pvt. Ltd).
Project Manager for establishment of hydrocarbon gathering pipeline and separating the condensate from gas and recovery of LPG. The work includes detailed engineering, procurement and construction supervision. Project Manager for re-location of LPG Plant Dehydration Plant to increase LPG Production Capacity to 50 tons per day and produce 3000 barrels per day condensate. Senior Project Engineer for Design activities of expanding and improving the water treatment, injection and distribution facilities. Maintenance / Engineering Superintendent Completed pre commissioning/commissioning activities and signed off acceptance and maintenance of 400 MMSCF of sour gas plant.
Omar Phase IV (Syria) Water Injection Project. (Petrofac International L t d . )
Maintenance and engineering Activities of UAN Refinery. (Abu Dhabi National Oil Company)
Abu Dhabi National Oil Company, Abu Dhabi, U.A.E Jan.' 79 - Dec.' 85
Operations & Maintenance (National Refinery Limited)
National Refinery Limited, Karachi Mar.' 67 - Dec.' 78
Supervised all the activities of maintenance and engineering departments of UAN Refinery. Responsible for maintenance and engineering activities of rotary equipment, stationary equipment, electrical and power distribution systems, instrumentation, process computers, selection of equipment, inventory management and standardization. Senior Plant Engineer / Operation Engineer Overall training in all the department of the refinery. Operation and maintenance of boilers, water treatment & distribution facilities, utilities, electrical system, power distribution system and asphalt air blowing unit. Coordinator total shutdown maintenance (turnaround) of the refinery. Control of all the activities of general engineering department which include mechanical, electrical, civil and instrumentation works. Supervised contract, maintenance and modification jobs.
COMPUTER SKILLS
MS Office & Other related engineering softwares AFFILIATIONS Life Member PEC (Pakistan Engineering Council) Member, Institute of Engineers of Pakistan Member, Petroleum Institute of Pakistan
PERSONAL
Page 3 of 3

Date of Birth Nationality Religion Marital Status Languages : : : : : July 01, 1944 Pakistani Islam Married English and Urdu
PERSONAL PROFILE
Employee No: 0000
Page 4 of 3

Name: Muhammad Alim ur Rahman Designation: Chief Executive
EDUCATION B.E Mechanical Engineering NED University of Engineering & Technology Karachi, Pakistan TRAINING / COURSES Microsoft Certified System Engineer + I Pumps & Compressors Short course held in collaboration of NED University & Petromen. Project Management by PIMs
PERSONAL PROFILE
Employee No: 0001
1993
2000 2002 2008
EMPLOYMENT HISTORY Present Chief Executive Global PMC (Private) Limited Karachi, Pakistan Previous Principal Engineer (Engineering Manager, British Petroleum Design House) JGC-DESCON Engineering (Pvt.) Limited Karachi, Pakistan Senior Mechanical Engineer ENAR Petrotech Services Private Limited Karachi, Pakistan EXPERIENCE PROFILE Present As Chief Executive Global PMC (Private) Limited, heading a team of Design Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries, operation & maintenance services, regulatory compliance & safety audits, pre-shipment inspections, HAZOPs and other related projects. Previous Have twenty years experience in the field of Project & Engineering Management, which includes Project Estimates, Detailed Engineering, Site/Construction Supervision, Regulatory compliance & safety Audits, Design vetting and Plant Operation & Maintenance, Annual turnaround & Facility Management services of Oil & gas, Power & Petrochemical Plants ensuring timely project completion according to governing codes, standards using latest computer technology. Carried out number of activities like development of Engineering Calculations, Piping Plans, Isometrics, Pipe Supports, BM/BQ Preparation, Specifications for Materials, Project Schedules, procurement activities, Supervision/Planning for Site activities etc. Have excellent knowledge of engineering design codes such as ASME, NFPA, API, ANSI, MSS, etc. I also have excellent knowledge of P&IDs, Mechanical, Civil, Structure, Instrumentation and Electrical drawings & Documents. While working in ENAR Petroleum Refining Facility as a Plant Manager, I gained in-depth knowledge of plant operation techniques, maintenance problems & schedules and annual turn around activities.
Page 1 of 4
July 2010 to-date
June 2008 to-July 2010
June 1993 to May 2008

The work details in projects are as follows: Project Description Development of detailed feasibility study of small crude oil topping unit (Global PMC Pvt. Ltd.) Developed Process Simulation Model of Gas Dehydration Unit (Global PMC Pvt. Ltd.) Developed Process Simulation Model Gas Sweetening Unit (Global PMC Pvt. Ltd.) Development of Fabrication Drawings for multi-storied complex steel structure (Global PMC Pvt. Ltd.) Stress Analysis of Utility Pipe Rack (Global PMC Pvt. Ltd.) Developmnt of Hysis Simulation Model & Cost estimate (Global PMC Pvt. Ltd.) Relocation of 300 tons/day edible oil refinery (Global PMC Pvt. Ltd.) Site Management Services (Global PMC Pvt. Ltd.) 220 tons/day Sulfuric Acid Plant (Global PMC Pvt. Ltd.) Design House of British Petroleum Pakistan Managed by DIPL, formerly JGC-Descon Engg. Pvt. Ltd. Inspection of LPG Production & Bottling Plants. (ENAR Petrotech Service Pvt. Ltd). Client Mansha Brothers
PERSONAL PROFILE
Employee No: 0001
Responsibility Project Manager for Development of detailed feasibility study on small crude oil topping unit (InProgress). Project Manager for Developed Process Simulation Model & detailed cost estimate of Gas Dehydration Unit (for EPC Bid) Project Manager for Developed Process Simulation Model & detailed cost estimate of Gas Sweetening Unit (for EPC Bid). Project Manager for the Development of Fabrication Drawings for multi-storied complex steel structure and detailed BOQ Project Manager for the stress analysis of utility pipe rack of under construction utility pipe rack. Project Manager for the Development of Process Simulation model for the Kausar field of MKK concession with excel interface for engineers not familiar with Aspen-Hysis software. UEC formerly BP Pakistan Project Manager for the relocation engineering of 300 tons/day edible oil refinery Site Consultant for the construction site of Enar Petroleum Refining Facility-II Project Manager for the development of Process & Mechanical Package of 220 tons/day Sulfuric Acid plant Engineering Manager for the design house consists of more than 32 Engineers & draftsmen and handled projects of millions of US $. Project Sponsor for the inspections of different plants. I was the main contributor with OGRA for the development of regulatory compliance audit system in Pakistan. This Project involves collection of technical data / documentation, visual inspection of plant and facilities, assessment of plants for compliance of Codes/ standards & compilation of inspection report. Project Manager for the development of detailed feasibility report, for the relocation of 25,000 bbls deep conversion refinery from USA. Visited USA for the detailed inspection, developed philosophy / procedures for dismantling, packing, loading, transportation to USA port and sea transportation to Karachi. Developed strategies for re- simulation, reengineering, refurbishment of equipments, installation, erection and commissioning The total relocated cost of the plant are $ 85 M.
Peoples Steel Mills Pakistan
Peoples Steel Mills Pakistan Futehally Chemicals (Uniliver) Byco Refinery
Heavy Mechanical Complex
Dlada Foods Enar Petroleum Refining Facility-II Cactus fertilizer British Petroleum Pakistan (Jun. 08 to Jul. 2010) Oil & Gas Regulatory Authority(OGRA) (Sep.05 May 08)
Enar Petroleum Refining Facility (EPRFIII) Project (ENAR Petrotech Service Pvt. Ltd).
Enar Petroleum Refining Facility (Aug. 07 Nov. 07)
Page 2 of 4

Enar Petroleum Refining Facility (EPRFII) Project (ENAR Petrotech Service Pvt. Ltd). Bosicor Pakistan Limiteds CDU revamp Project (ENAR Petrotech Service Pvt. Ltd). Dhodak Expansion Project (ENAR Petrotech Service Pvt. Ltd). Garhi Hassu LPG plant rehabilitation Project (ENAR Petrotech Service Pvt. Ltd). Enar Petroleum Refining Facility (EPRFI) Project (ENAR Petrotech Service Pvt. Ltd). Enar Petroleum Refining Facility (Dec. 06 May 08) Bosicor Pakistan Limited (Dec. 05 - to Dec.06)
PERSONAL PROFILE
Employee No: 0001
OGDCL (Feb. 05 to Nov.05)
OGDCL (Jul. 04 to Feb. 05)
Enar Petroleum Refining Facility (Jan. 03 to Jun. 04)
Condensate Processing Facility Project (EPRF-I) (ENAR Petrotech Service Pvt. Ltd). Uch Gas Gathering Project (ENAR Petrotech Service Pvt. Ltd). Dakhni Train II Project (ENAR Petrotech Service Pvt. Ltd). Coastal Refinery Project (ENAR Petrotech Service Pvt. Ltd) Bobi Early Production Facilities Project (ENAR Petrotech Service Pvt. Ltd) Tando Alam Integrated Develop. Project (In collaboration with M/s. Alliance Engg. Inc. USA). (ENAR Petrotech Service Pvt. Ltd) Fuel oil supply to AES power plant Lalpeer. (ENAR Petrotech Service Pvt. Ltd)
Enar Petroleum Refining Facility (Apr. 98 to Dec.02)
Project Manager for the grass root pilot refinery project, this project involves the basic and detailed engineering design of process unit, off sites & utilities, procurement, construction and commissioning. Project Manager for the CDU unit revamp project, this project involves the development of Engineering Design Specification (EDS) packages for process unit, off sites and utilities. After revamp the processing capacity of the CDU unit increased from 12,000 bbls/day to 30,000 bbls/day. Project Manager for the development of FEED for EPC Contractor. This involves the relocation of unused LPG plant to Dhodak to cater the increased well productions with integration to existing plant. Project Manger for the detailed engineering and inspection of LPG Plant (stored unused for last eight years) and assessment of the re-engineering & works required for the rehabilitation and installation. Plant Manager, solely responsible for the O & M EPRF-I during the first 18 months after the commissioning of refinery capable of processing 3000 bbls/day of local condensate. This project is the first of its kind in the country & providing strategic support to the defense forces of the Pakistan. Lead Design Engineer/Site Coordinator for the grass root (3000 bbls/day) pilot refinery project. This project includes basic engineering, detail design, procurement, & fabrication supervision of equipments, Pre-shipment inspection, construction supervision and commissioning of the plant. Team Lead for complete cost estimate of gas gathering system from different wells to the Central Processing Facilities. Team Lead for complete cost estimate of Dakhni Train II and Dakhni BMR Project. The objective is to increase the processing capacity of the existing plant from 30 MMSCFD to 50MMSCFD. Team Lead for complete cost estimate of the grass roots refining complex capable of processing 120,000 bbls/day of crude oil. Lead Mechanical Engineer, responsibilities includes pipeline route selection, survey, alignment drawings, wellhead piping, design, procurement, quality control/ assurance documents etc. Design Engineer, responsibilities includes pipeline route selection, survey, alignment drawings, wellhead piping and detailed engineering of Oil/Gas/Water separation satellites and central facilities. Design Engineer, responsibilities includes pipeline route selection, survey, alignment drawings, interconnecting piping with Lalpeer power plant facilities.
OGDCL (Jun. 98 to Sep.98) OGDCL (Jun. 98 to Sep.98) Government of Pakistan (Sep. 97 to Oct. 97) OGDCL (Jan. 97 to Mar. 98) Oil & Gas Development Corporation Limited (Jan. 96 to Dec. 96) Pakistan State Oil (Sep. 95 to Nov.95)
Page 3 of 4

Hoechst Ravi Chemical Project (In collaboration with M/s. Lurgi, Germany), (ENAR Petrotech Service Pvt. Ltd)
PERSONAL PROFILE
Employee No: 0001
Hoechst Ravi Chemical (Aug. 93 to Sep.95)
Design Engineer, responsibilities includes detailed engineering for production of PA, MA and DOP. The chemical plant is based on Lurgi GmbH processes. Also provide site supervision (site consultancy) services during the construction phase.
COMPUTER SKILLS
MS Office, MS Project, Autocad & Other related engineering softwares
AFFILIATIONS Life Member PEC (Pakistan Engineering Council) Pakistan Petroleum Institute
PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 14th February 1967 Pakistani Islam Married English and Urdu
Page 4 of 4

Name: Zakiuddin Hussain
PERSONAL PROFILE
Employee No: 0002
Designation: Consultant Mechanical Engineering

EDUCATION M. Sc. Petroleum Technology Karachi University, Pakistan B.S Mechanical Engineering NED University of Engineering & Technology Karachi, Pakistan TRAINING / COURSES T Bosiet EMPLOYMENT HISTORY Present Head Mechanical Engineering Global PMC (Private) Limited Karachi, Pakistan Previous Rotating Equipment Design Specialist NETCO Nigeria Engineering Manager Terra Engineering Nigeria Senior Mechanical Engineer ENAR Petrotech Services Private Limited Karachi, Pakistan EXPERIENCE PROFILE Present As Head Mechanical Engineering Global PMC (Private) Limited, heading a team of Design Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries, operation & maintenance services, regulatory compliance & safety audits, pre-shipment inspections, HAZOPs and other related projects. Previous Worked as Rotating Equipment Design Specialist with NETCO Nigeria. Duties include providing direction and supervision to mechanical department. Providing the client the best engineering solution based on engineering standards and best practices. Oversee and assist the engineers in projects design and develop specification of equipment. Assist and develop documentation to support new equipment implementation (User requirement specification, detailed design specification, Worked as Engineering Manager for Terra Engineering Nigeria. Duties include providing the client the best engineering solution based on engineering standards and best practices. Oversee and assist the engineers in projects design and develop specification of equipment. Assist and develop documentation to support new equipment implementation (User requirement specification, detailed design specification, operating and maintenance procedures, FAT, SAT and commissioning documents) engineering studies, technical support, QA, validation and other departments for process improvement, troubleshooting, change control and deviation resolution. Worked as Senior Engineer in ENAR Petrotech. ENAR is an Engineering Consulting Company providing project management and detailed engineering services to Refineries & Petrochemical Plants. Major Clients include OGDCL, NRL, PARCO, BP, OMV, Eni, MOL, PPL and PSO, etc. During the eleven (11) years of professional associations with EPSL gained experience in the Project Management and Detailed Engineering Design. In the capacity of project manager carried out human resource management, provide technical team leadership, involved in project planning, coordinated with all engineering discipline for smooth execution of project and liaised with client to embed concerns and updated the schedule in line with the new developments and revised scope of works. Also responsible for detailed design while leading detailed engineering.
1998 1995
Jul. 2010 to-date
Nov. 2009- Jun. 2010 Jun. 2006- Oct. 2009 Jun. 1995 to May 2006
Page 1 of 3

PERSONAL PROFILE
Employee No: 0002

The work details in projects are as follows: Project Description Associated Gas Gathering Facility Project (AG Solution Project) Vent Capture Projects Client Shell Petroleum Development Company Limited Nigeria Chevron Nigeria Limited. Responsibility Oversee and assist the engineers in projects design and develop specification of equipment. Assist and develop documentation to support new equipment implementation (User requirement specification, detailed design specification. Supervised mechanical department. Provided best engineering solution based on engineering standards and best practices. Oversee and assist the engineers in projects design and develop specification of equipment.
ADN-B Wellhead Platform Detailed Design Project Concept Verification and Detailed Design of H2S Scavenger System at BONGA FPSO Structural Design Projects at BRT & QIT Facilities under Call-off Contract. ORWS Wellhead Platform Detailed Design Project
Addax Petroleum Oversee and assist the engineers in projects design and Development Nigeria develop specification of equipment. Limited Provide engineering studies, technical support, QA, Shell Nigeria validation for process improvement, troubleshooting, Exploration & Production Company change control and deviation resolution. Duties include providing the client the best engineering solution based on engineering standards and best practices.
Mobil Nigeria
Detailed Engineering Project for Adhi field of PPL
Manzalai-1 EWT Surface Facility Project
BOBI LPG Project.
Qadirpur Capacity Enhancement Project for Gas purification Plant.
Assist and develop documentation to support new Addax Petroleum equipment implementation (User requirement Development Nigeria specification, design specification, O & M procedures, Limited FAT, SAT and commissioning documents). Project manager on . Project involved engineering and planning. Responsible for the engineering design, coordination between company and client, monitoring Gastec GmbH project progress, sourcing of material, coordination of workflow, ensuring budget and milestones. As Project manager led a team of process, mechanical, piping, electrical and instrument engineers to carry out the front end engineering of the project. Developed the MOL Pakistan time schedule, performance curve and assisted project Limited team to meet the schedule give in the Gantts Chart. Was also involved in the cost estimating (CAPEX & OPEX), planning and scheduling of the Project. Worked as a site manager for project and was also Oil & Gas involved in detailed engineering, planning and Development Corporation Limited construction of a LPG plant from design to completion. Responsible for the detailed engineering design, coordination between company and client, monitoring Oil & Gas project progress, sourcing of material, coordination of Development Corporation Limited workflow, ensuring budget and milestones are maintained.
Page 2 of 3

PERSONAL PROFILE
Employee No: 0002

Worked as project manager for Projects involved collection and compilation of technical data / documentation, review of processing scheme of plants and refineries, visual inspection of plant and facilities, assessment of present condition of plant and facilities, estimation of probable remaining operating life of plant and facilities, assessment of normal replacement / maintenance requirements and revamps projects and identification of non-essential / non productive assets. Project Manager for the inspections of different plants. I was the main contributor with OGRA for the development of regulatory compliance audit system in Pakistan. This Project involves collection of technical data / documentation, visual inspection of plant and facilities, assessment of plants for compliance of Codes/ standards and compilation of inspection report. Led a team of process, mechanical, piping, electrical and instrument engineers to carry out the front end engineering of the project. Developed the time schedule, performance curve and assisted project team to meet the schedule give in the Gantts Chart. Oversee and assist the engineers in detailed engineering design and develop specification of equipment.
Technical assessment of various plants and refineries in Pakistan.
Various Clients
Inspection Production Plants.
of LPG & Bottling
Oil & Gas Regulatory Authority(OGRA)
Detail Engineering of Kadanwari Well K-1 & K6 Engineering Study for Low Cost Low Pressure Wellhead Systems. Cost evaluation Study for Dhurnal LPG Plant. Dhurnal Gas Lift Project Kunnar LPG Project Condensate Processing Facility Project. Uch Gas Development Project. Designing Fixed & Floating Roof Crude Storage Tanks COMPUTER SKILLS
LASMO Oil Pakistan Ltd
LASMO Oil Pakistan Ltd Orient Petroleum Inc.
Projects involved collection and compilation of technical data / documentation, assessment of present condition of plant, estimation of remaining operating life of plant. Was involved in detailed engineering and project Orient Petroleum Inc. planning of the project. Worked as a site engineer for project and was also Oil & Gas Development involved in detailed engineering, planning and Corporation Limited construction of a LPG plant from design to completion. Enar Petroleum Design Engineer for Condensate Processing Facility Refining Facility project. Was involved in detail design. Oil & Gas Development Worked as a site engineer for project Corporation Limited Various Clients Detail Design & construction supervision of several storage tanks.
MS Office, MS Project, Autocad & Other related engineering softwares AFFILIATIONS Life Member PEC (Pakistan Engineering Council) PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 1970 Pakistani Islam Married English and Urdu
Page 3 of 3

Name: Nasiruddin Shaikh
PERSONAL PROFILE
Employee No: 0003
Designation: - Consultant Process Engineering
EDUCATION Working towards Chartered Engineer Status, Associate member of Institute of Chemical
Engineers, United Kingdom. Bachelor of Chemical Technology from University of Karachi. (1999) secured First Class First Position (80.0%). Master of Computer Science (MCS) from PAF-KIET (2002) with CGPA 3.33. H.S.S.C. from Sind Muslim Science College, Karachi (1994) S.S.C. from Govt. Tech. High School, Karachi (1992.
TRAINING / COURSES
In house training of Process Simulation using Hysys Advance Process Simulation Heat exchanger design using HTFS Installation and configuration of Fischer Delta V DCS Quality management system (ISO 9000:14000)
EMPLOYMENT HISTORY Present

I. Global PMC Private limited (July 2010 to To date)
As Consultant Process Engineering for Global PMC (Private) Limited, providing process engineering services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries, operation & maintenance services, regulatory compliance & safety audits, pre-shipment inspections, HAZOPs and other related projects.
II.
II. Litwin PEL, L.L. C. Abu Dhabi (Oct-2009 to To date)
Litwin is a well established engineering company, with more than 1000 references in Oil & Gas, Chemical & Industry, and Energy & Environmental projects. With about 1200 dedicated engineers, technical specialists and project managers, Litwin provides comprehensive engineering services, from feasibility studies through construction of plants on a turnkey basis, for clients worldwide. Litwin works in close partnership with major technology providers and develop alliances with reputable equipment manufacturers, seeking to optimize project management and technology-specific skills. Worked in the capacity of Senior Process engineer and involves in the following on-going projects: a. Keyi Field production facilities, Sudan, a green field project, involved gathering network, inlet separation, Condensate stabilization, Gas compression and all associated utilities. b. Leading the project for Isomerate Quality Improvement of Ruwais Refinery, TAKREER. Project scope includes, detailed design, Procurement, Construction and Commissioning of Light Naphtha Splitter to reduce C5 content from Isomerization unit feed. c. Involved in the technical proposal preparation for following: Early Production facilities for IPRC in Syria Early Production Facilities for OMV-IRAQ in Kurdistan Region Bitumen Production Plant for OMV-IRAQ in Kurdistan Region Carry out Process Simulation using Aspen Hysys, prepare PFDs, preliminary sizing for all major equipments, preliminary P&IDs for cost estimation purpose.
Page 1 of 3

PERSONAL PROFILE
Employee No: 0003
Previous
III. Clough Engineering and Integrated Solutions (CEIS), Pty Ltd (May-07 to Jun-2009)
The Clough Group is one of Australia's largest multidisciplinary engineering, construction and asset management group's active in the international oil & gas, minerals, infrastructure and property industries with its Corporate Head Office located at Perth in the Western Australia. The Group's turnkey services range from complex front-end engineering design, construction, installation and commissioning to long term operations and asset maintenance. Major Clients of Clough Pakistan includes, Petronas Carigali, OMV, BHP, ENI, BP Pakistan, PPL, etc. Worked as Assistant Engineering Manager
IV.
Nama Mott MacDonald (Oil and Gas Division Abu Dhabi) (Nov-2006 to May 2007)
Mott MacDonald one of the world's foremost Multi-disciplinary Independent Engineering Consultancies with its Corporate Head Office located at Croydon in the UK. With a complement of 8,500 qualified staff worldwide providing an annual turnover in excess of 900 million US $, Mott McDonald have offices in more than 50 countries and a global experience spanning more than 130 countries. Major clients includes: ZADCO, ADCO, ADMA-OPCO, GASCO, TAKREER, ADGAS, QP, NPCC, etc. Worked as Senior Process Engineer
V.
Dar-al-Riyadh Consultants, Saudi Arabia (Sep-2005 to Oct-2006)
Dar-Al-Riyadh Consultants is a leading Consultancy firm of Saudi Arabia. Major clients include Saudi Aramco, SABIC, Petro Kemya, etc. Worked as Process Design Engineer and involved in the following Project/studies:
VI.
Petrosin Engineering (Private) Limited (March-2004 to August-2005)
Petrosin Engineering Private Limited is a leading Company of Pakistan in engineering design, fabrication, installation and commissioning of oil and gas processing plants. Company is also involved with operations and maintenance services. Worked as Senior Process Design Engineer and involved in following projects/bids:
VII.
ENAR Petrotech Services (Private) Limited (May-2000 to Feb-2004)
ENAR is a leading design, engineering and consulting organization providing services of feasibility studies, process design, detailed engineering, bid evaluation and recommendation, project monitoring, inspection and construction supervision to the projects in the petroleum refining, storage and cross country pipelines, gas processing, chemical fertilizer and other sectors of the process industry. Major clients include OGDCL, NRL, PARCO, PSO, BP Pakistan, OMV, LASMO, PPL, etc. Worked as Process Engineer
VIII.

Clariant Pakistan Limited (Sep-1999 to April 2000)
Worked as Trainee Officer in the following Sections Dyes/Chemicals Production &Utilities Generation Quality Control Environmental Safety & Health (ESHA)
EXPERIENCE PROFILE
Project Description
ZAM North, ZAM B and ZAM D, tie-in detail engineering with Central Gas Processing Plant Saqib-1A EWT Wellhead Development Facility Conceptual and Front End Design for Kandhkot Gas Purification Plant Latif-2 EWT Wellhead Development Facility Rehamat Gas Field De-Bottlenecking Study Tajjal-1 EWT Wellhead Development facility
Client
BHP Pakistan Petronas Pakistan PPL OMV Pakistan Petronas Pakistan OMV Pakistan Process Team Process Team Process Team Process Team
Responsibility
Engineering and leading the Process Engineering and leading the Process Engineering and leading the Process Engineering and leading the Process
Process Engineering and leading the Process Team Process Engineering and leading the Process Team
Page 2 of 3

PERSONAL PROFILE
Employee No: 0003

Design House activities for BP to provide complete range of services for BP facilities in Pakistan Level 3 ESD and Depressurization system for Satah crude processing facilities NASR offshore field development project, Conceptual and FEED development Zulf Artificial lift Project De-bottlenecking study of Yanbu Refinery Atmospheric Distillation columns pump around circuits Conceptual design of Brazed Aluminum plate type heat exchanger for Berri Gas Plant, Ethane and NGL Unit Study of upgrade of North Refinery flare system of Ras Tanura Refinery Study of up gradation of Relief system at Ras Tanura Refinery Detailed Engineering design of CO2 pipeline Preparation of Bid document of Pindori Gas plant Expansion Phase II Preparation of FEED study and Bid document for Orient Pakistan Inc. (OPI) Kausar and Umer fields Condensate Processing Facility Front End Engineering Design and development of surface facilities for Extended Well Testing (EWT) for Manazali 1 Front End Engineering Design for Relocation and upgradation study of Fimakassar LPG Plant to Chanda Gas Field Front End Engineering Design of Adhi Gas Field to enhance the capacity of existing plant Front End Engineering Design of Mazarani Gas Field to Install Gas Sweetening, De-hydration and dew point reduction Dakhni Expansion study Capacity enhancement study of Dhodak field Preliminary Feasibility Study of Tangri & Mazari Gas Field Development of System Curves of Kadanwari Gas Field Gathering lines Qadirpur Capacity enhancement project Capacity Enhancement Study of Turk Amine Plant Relocation study of Dhurnal LPG Plant to Hyderabad De-Bottlenecking study of Propane Recovery Unit Process Selection & Screening study of Mari Gas Field BP Pakistan ZADCO, UAE ADMA-OPCO, UAE Saudi Aramco Saudi Aramco All process engineering activities All process engineering activities Process Simulation, PFDs, P&IDs, equipment sizing, hydraulics Process Simulation, Equipment Sizing, Process Datasheets Process Simulation, Process Datasheets Equipment Sizing,
Saudi Aramco
Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets, Technical bid preparation Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets, Technical bid preparation Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets, Hydraulics calculations, Design Philosophies Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets, Equipment list, Line list, Design philosophies Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets Process Simulation, PFDs, P&IDs, Equipment Sizing and Process Datasheets, Equipment list, Line list, Design philosophies Process Simulation, PFDs, P&IDs, Process datasheets. Process Simulation, Plant Test Run Process Simulation, Equipment sizing and rating. Feasibility study, Process Simulation, Equipments datasheets and Specifications Plant Test run, Process simulation, Study Report and hydraulics
Saudi Aramco Saudi Aramco KDI, Saudi Arabia POL, Pakistan
OPI, Pakistan ENAR Petrotech, Karachi MOL Pakistan OGDCL, Pakistan PPL
PPL OGDCL, Pakistan OGDCL BP Pakistan LASMO Oil Pakistan OGDCL, Pakistan BP Pakistan SSGC, Pakistan NRL, Pakistan OGDCL
Selection of Suitable membranes, hydraulics analysis, optimization of heat exchangers Process Simulation, comparisons of different amine solvents, rating of equipments Process Simulation, Rating and sizing of equipments Process Simulation, rating and sizing of equipments, Plant Test run Comparison of various processes for gas sweetening and dehydration
Page 3 of 3

PERSONAL PROFILE
Employee No: 0003
COMPUTER SKILLS
Engineering Software (Aspen HYSYS, Complete HTFS Suit, WinSim (Design-II), SiNET, KORF Hydraulics, AMSIM, Line Sizing, Pump Sizing, Control Valve Sizing, Relief Valve Sizing, etc.) Microsoft Windows 2000/XP/NT, LINUX & UNIX C/C++ & Object Oriented Programming, COBOL Programming Visual Tools (Visual C++, Visual Basic, Visual FoxPro, Visual InterDev) Web Development Tools (Flash, Dreamweaver, Java, ASP, FrontPage)
AFFILIATIONS Associate Member, Institute of Chemical Engineers, UK PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 2nd Nov. 1976 Pakistani Islam Married English and Urdu
Page 4 of 3

Name: Umair Baig
PERSONAL PROFILE
Employee No: 006
Designation: Consultant Process Engineering

EDUCATION Bachelor of Chemical Technology, University of Karachi, Karachi, Pakistan TRAINING / COURSES Hysis Aspen Plus 2003 2007 2003
EMPLOYMENT HISTORY Present Process Consultant Global PMC (Private) Limited Senior Process Engineer Foster Wheeler Energy Limited, Readings, United Kingdom Previous Process Engineer Petrofac Sarjah Process Engineer Foster Wheeler Energy Limited, Readings, United Kingdom Senior Process Engineer ENAR Petrotech Services Private Limited, Karachi, Pakistan EXPERIENCE PROFILE Present As Process Consultant for Global PMC (Private) Limited and Foster Wheeler Energy Limited, Readings, United Kingdom, providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, operation & maintenance services, regulatory compliance & safety audits, pre-shipment inspections, HAZOPs and other related projects. Previous Have more than seven years experience in the field of Process Engineering and R&D works, which includes FEED, Process Design & HAZOPs of Gas plants and refineries including Gas gathering & trunk lines, Gas oil separation plants, Gas treatment units (amine & glycol unit), LPG recovery units, Crude Preheat trains, gas condensate refining units, crude unit, Naptha splitting and stabilization system. Design of utility system such as fuel gas, hot oil system, condensate recovery system, steam distribution system, compressed air distribution system, etc. Hydrocarbon based R&D Preparation & Development of HMB, PFDs, P&IDs, process datasheets, simulations reports and FEEDs The work details in projects are as follows: July 2010 to May 2011 Feb. 2009 to July 2010 June 2003 to Feb. 2009 July 2010 to date
May 2011 to date
Project Description
PSR2 2-Phase Hydrocracker (Unit 30) TA Projects (Foster Wheeler Energy Limited) Ras Tanura Integrated Project (RTIP) (Foster Wheeler Energy Limited) 120,000 BPDS Milford Haven Refinery Relocation Project (ENAR Petrotech Service Pvt. Ltd).
Client
Melaka Refinery Malaysian Refinery Co (Sep.09 Apr. 10) Saudi Aramco (Feb. 09 to Aug. 09) Bosicor Oils Pakistan Limited (Jun. 08 Feb.09)
Responsibility
Process Engineer for the development PFDs and P&IDs for the implementation of hydrocracker revamp project Process Engineer for the development & optimization of Process design document for pre-feasibility estimate for all the utilities. Lead Process Engineer for the development Simulation model based on Qatar Marine Crude. of
Page 1 of 2

Name: Umair Baig
PERSONAL PROFILE
Employee No: 006
Designation: Consultant Process Engineering

40,000 BPBS CDU Revamp Project (ENAR Petrotech Service Pvt. Ltd). Mild Vacuum & Visbreaker Unit (ENAR Petrotech Service Pvt. Ltd) Enar Petroleum Refining Facility (EPRFIII) Project (ENAR Petrotech Service Pvt. Ltd). Visbreaker pilot scale study Enar R&D Project (ENAR Petrotech Service Pvt. Ltd). Enar Petroleum Refining Facility (EPRFII) Project (ENAR Petrotech Service Pvt. Ltd). Simulation of Hydrotreater (ENAR Petrotech Service Pvt. Ltd). 30,000 BPSD CDU revamp Project (ENAR Petrotech Service Pvt. Ltd). FEED for TAY and SINJHORO development Project (ENAR Petrotech Service Pvt. Ltd). HAZOP study of Bhit plant (ENAR Petrotech Service Pvt. Ltd). Enar Petroleum Refining Facility (EPRFI) Project (ENAR Petrotech Service Pvt. Ltd). Bosicor Pakistan Limited (Apr. 08 Jun. 08) ENAR Petroleum Refining Facility (Sep. 07 Apr. 08) Enar Petroleum Refining Facility (Jan. 07 Sep. 07) Enar Petroleum Refining Facility (Jan. 07 Jun. 07) Enar Petroleum Refining Facility (Oct. 06 Jan. 07 Pak Arab Refinery (Jan. 06 Oct. 06 Bosicor Pakistan Limited (Sep. 05 - to Jan. 06) Oil & Gas Development Corporation Limited (Jun. 05 to Sep. 06) ENI (LASMO) May 2005 Enar Petroleum Refining Facility (Jun. 03 to Jan. 05) Lead Process Engineer for the development of process simulation from test run data to final EDS packages. Lead Process Engineer for the development of Vacuum unit to recover middle distillate from atmospheric bottom and visbreaker to reduce the pour point of the vacuum bottoms. Lead Process Engineer for the development of simulation for the relocation and enhancing the processing capacity from 15000 BPDS of Libon & Shale Oil to 23000 BPDS of local condensate and light crude oil. Lead Process Engineer for carrying out several test runs on an in-house designed pilot scale visbreaker. Lead Process Engineer for conceptual, simulation, preheat train, equipment sizing, line hydraulics, control scheme, PFDs, P&IDs, flare system, offsit and utilities. Lead Process Engineer for the simulation of middle distillate Hydrotreater and gas concentration units. Lead Process Engineer for the simulation model covering preheat train modifications, addition of new preflash column and fired heater, modification in existing atmospheric column, naptha splitting and LPG recovery Unit. Lead Process Engineer for the a complex surface facility and its integration with the existing BOBI LPG Plant of OGDCL. It includes process selection stydy, process simulation, development of PFDs & P&IDs Participated in the complete HAZOP study of the Bhit plant. Technical Services Engineer responsible for the test runs to identification of bottlenecks, process simulation of plants, development of HMB across the columns, heat exchangers and furnaces. Carried out preflash overhead corrosion control study and successfully implemented.
COMPUTER SKILLS
Hysis Aspen plus, Aspen B-JAC, Aspen HX-net Winsim Design II Pipesys, Pipesim Fisher First Vue HTFS+ Flarenet Korf HTRI Hands on DCS (DELTA V)
AFFILIATIONS AMIChemE (working towards chartered Status) PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 27th June 1982 Pakistani Islam Married English and Urdu
Page 2 of 2

Name: M. Aquil ur Rahman Designation: Senior Engineer (Civil)
EDUCATION Bachelor of Civil Engineering NED University of Engineering & Technology, Karachi, Pakistan
PERSONAL PROFILE
Employee No: 0007
1990
TRAINING / COURSES ROADCAL STAAD PRO 2003 2007
EMPLOYMENT HISTORY Present Principal Engineer (Civil) Global PMC (Private) Limited, Karachi, Pakistan Previous Cad Engineer (Self Employed) Able Engineering & Construction Services, New Jersey, USA. Site Engineer Tariq & Associates, Karachi, Pakistan Cad Engineer (Self Employed) Able Engineering & Construction Services, New Jersey, USA. Highway Design Engineer Zafar & Associates, Karachi, Pakistan Highway Design Engineer Self Employed May 2005 to June 2010 July 2010 to-date
Mar. 2004 to Apr. 2005
May 2000 to Feb. 2004
May 1996 to Apr. 2000
Oct. 1994 to Apr. 1996 Oct. 1990 to Sep. 1994
EXPERIENCE PROFILE Present As Principal Engineer (Civil) in Global PMC (Private) Limited, leading a team of Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries and other related projects.
Previous Have more than twenty years experience in the field of Civil Engineering and CAD drafting works, which includes Designing of buildings, roads, highways, flyovers etc.
Page 1 of 4

Name: M. Aquil ur Rahman Designation: Senior Engineer (Civil)
The work details in projects are as follows:
PERSONAL PROFILE
Employee No: 0007
Project Description Design & Cad drafting services. (Self Employed) Construction of Govt. Degree College (Tariq & Associates)
Client Able Engineering & Construction Services New Jersey, USA. (May 05 to Jun.10) SIndh Government (Mar. 04 to Apr. 05)
Responsibility Cad Engineer for the services of design engineering & drafting services to Able engineering for their high rise buildings, store sheds and other civil structures.
Site Engineer for the supervision of the construction activities of the Degree collage.
Able Engineering & Construction Services New Jersey, USA. (May 00 to Feb. 04) Federal & Various Highway Design Provincial Projects Government s (Zafar & Associates) (May 96 to Apr. 00) Federal & Various Highway Design Provincial Projects Government s (Umar Munshi & Associates) (Oct 94 to Apr. 96) Design & Cad drafting services. (Self Employed) Supply of construction Chemicals (Self Employed) Various Clients (Oct. 90 Sep. 94)
Cad Engineer for the services of design engineering & drafting services to Able engineering for their high rise buildings, store sheds and other civil structures. Highway Design Engineer for various highway design projects, flyover and buildings projects in Pakistan
Highway Design Engineer for various highway design projects, flyover and buildings projects in Pakistan Had been engaged in promoting and supply of construction chemicals to different industries and contractors.
COMPUTER SKILLS
ROADCALC 13.1 L-A ETABS 9.5.0 SAFE 12.1.1 STAAD PRO 2006 AUTO CAD MS OFFICE AFFILIATIONS Life Member PEC (Pakistan Engineering Council)
PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 26th November, 1961 Pakistani Islam Married English and Urdu
Page 2 of 4

Name: Faraz Kazmi Designation: Senior Engineer (Electrical)
EDUCATION MBA (Industrial Management) from CBM Passed 1st semester 3.4 GPA
PERSONAL PROFILE
Employee No: 0008
(In Progress)
Bachelor of Electrical Engineering NED University of Engineering & Technology, Karachi, Pakistan
2005
TRAINING / COURSES Matrix (ERP Management) AEI software 2008 2010
EMPLOYMENT HISTORY Present Principal Engineer (Electrical) Global PMC (Private) Limited Karachi, Pakistan Previous Jul 2010 to-date
In Charge E&P / Electrical South Region ETIMAAD Engineering (Private) Ltd Karachi, Pakistan Electrical Engineer ENAR Petrotech Services Private Limited Karachi, Pakistan EXPERIENCE PROFILE Present
July 2008 to Jul 2010
Mar 2005 - Jul 2008
As Principal Engineer (Electrical) in Global PMC (Private) Limited, leading a team of Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries and other related projects. Previous
Page 1 of 4

PERSONAL PROFILE
Employee No: 0008
Have more than Six years experience in the field of Design, Project, Engineering Management, plant operation & maintanance which includes Project Estimates, Detailed Engineering,
Site/Construction Supervision, Regulatory compliance & safety Audits, Design vetting and Plant Operation & Maintenance of Oil & gas, Power & Petrochemical Plants ensuring timely project completion according to governing codes, standards using latest computer technology. Carried out number of activities like development of Engineering Calculations, specifications for generators, motors, cables, UPS, motor control center, transformers, development of power generation and distribution philosophy, load calculations, equipment and cable sizing, development of single line, wiring connection schematics, area classification and layout drawings, typical installation details, detailed BOQ, Technical bid evaluation for the project, Cost Estimation for overall / parts of projects, Review / approval of equipment specification and data sheets, Prequalification of equipment suppliers / contractors, Technical and commercial evaluation work, Preparation of technical reports as part of feasibility studies, procurement activities, Supervision/Planning for Site activities etc. Have knowledge of engineering design codes such as NFPA, API, IEC. The work details in projects are as follows:
Project Description P&G DRY LAUNDRY PLANT (ETIMAAD Engineering Private Limited)
Client
Responsibility In Charge Electrical and Instruments at P&G dry Laundry project Karachi, responsible for the overall E&I construction and design review
Proctor & Gamble (Jul 08 to Jul 10)
BAHU DEVELOPMENT PROJECT (ENAR Petrotech Service Pvt. Ltd).
Oil & Gas Development Company Ltd 2007
Electrical Engineer for the development of feed document of Bahu well head facility
QADIRPUR 600MMSCFD PROJECT (ENAR Petrotech Service Pvt. Ltd)
Oil & Gas Development Company Ltd 2007-08
Electrical Engineer for the Detail engineering design and construction supervision of the project
DAKHNI EXPANSION PROJECT (ENAR Petrotech Service Pvt. Ltd)
Oil & Gas Development Company Ltd 2005
Electrical Engineer for the Detail engineering design
Page 2 of 4

Chanda Gas Field Development Project (ENAR Petrotech Service Pvt. Ltd) Oil & Gas Development Company Ltd 2005-06
PERSONAL PROFILE
Employee No: 0008
Electrical Engineer for the Detail engineering design and project Electrical Engineer for the collection and construction supervision of the
NRL VALUATION OF ASSETS TECHNICAL ASSESSMENT (ENAR Petrotech Service Pvt. Ltd)
compilation of technical data / documentation, Pak Hy Oils Ltd. 2006 assessment of present condition of plant, estimation of probable remaining operating life of plant. Electrical Engineer for the collection and compilation of technical data / documentation, Bosicor Pakistan Ltd. 2006 assessment of present condition of plant, estimation of probable remaining operating life of plant.
BOSICOR VALUATION OF ASSETS TECHNICAL ASSESSMENT (ENAR Petrotech Service Pvt. Ltd)
ENAR PETROLEUM REFINING FACILITY ENAR Petrotech Services (Pvt.) Ltd.
ENAR Petrotech Service Pvt. Ltd 2005-2008
In charge Electrical for the Operation & maintenance of the refinery
COMPUTER SKILLS
MS Office Other related engineering softwares
AFFILIATIONS Life Member PEC (Pakistan Engineering Council)
PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 14th May 1982 Pakistani Islam Married English and Urdu
Page 3 of 4

Name: Rizwana Fatima
PERSONAL PROFILE
Employee No: 0010
Designation: Principle Engineer Civil / Structural

EDUCATION B.E Civil Engineering 1989
NED University of Engineering & Technology Karachi, Pakistan EMPLOYMENT HISTORY Present Principle Engineer Civil / Structural Global PMC (Private) Limited Karachi, Pakistan Previous Sr. Civil / Structural Engineer M/S Petrochem Engineering Services (Pvt.) Limited Karachi, Pakistan Senior Structural Engineer M/s Engineers Consortium Private Limited Karachi, Pakistan Senior Structural Engineer M/s Engineering Consultants International (Pvt.) Limited Karachi, Pakistan Senior Structural Engineer M/S Akbar and Associates (Pvt.) Limited Karachi, Pakistan Senior Structural Engineer M/S Qamar and Associates (Pvt.) Limited Karachi, Pakistan Team Leader M/S A.A. (Abdul Aleem) Associates Karachi, Pakistan Jan 2009 to July 2011 February 2011 to date
Jan 2008 to Jan 2009
Jan 2008 to Jan 2009
March 2005 to-Dec 2006
Jan 2004 to Sept 2004
Jan 2001 to Oct 2003
Assistant Engineer M/S Samiur Rahman Associates Karachi, Pakistan EXPERIENCE PROFILE Present
April 1990 - to -May 1992
As Senior Civil /Structural Engineer Global PMC (Private) Limited, Supervising a team of Design Engineers & Draftspersons for providing services to petrochemicals, storage terminals, textile industries & Oil refinery Previous Have 21 years of experience in the field of Civil Engineering, which includes Designing, Detailing, Bill of Quantities of steel structures and RCC structures for Oil refinery, Petrochemical facilities, Storage facilities, Structural Designing and detailing of Multistory Buildings, Textile Industries, Hospital Buildings and Educational Institutes, Vetting of Buildings.
Page 1 of 4

PERSONAL PROFILE
Employee No: 0010

Major responsibilities included the detailed Structural Designing and Detailing of Drawings. Coordination for evaluating and monitoring of Design projects along with uniformity, Consistency under approved Standards and Codes. Achieve TARGETS. Design and Detailing of Steel Structures, Pipe supports and equipment foundations. Dyke walls, Retaining walls, Tanks foundations. Preparation of Bill of Quantities. Petrochemicals Design and detailing of facilities of Admin Block, Gate office, Workers/ retiring room, Watch Tower, septic tank , soak pit, Under ground tank , Over Head Tank, Main Gate, Boundary wall, Mosque, Nala Crossing Structure, Generator room, Electrical Sub station room, Canteen, Workshop, scrap Yard, Car Parking, Foundation of Oil storage Tanks and Fire Water Tanks, Dyke walls, Retaining Walls, Pump House Meter Rooms/Additive Injection Skid, Foam Skid, Plate forms, Pipe supports and Equipment Foundations for the following Projects: Oil Storage and Installations at Machike HASCOL. Oil storage and Installations at Faisalabad Pakistan State Oil Oil storage and Installations at Machike and Rawalpindi APL Oil storage and Installations of Shell Pakistan at Kemari Pipe supports and platforms for Shell Hongkong Pipe supports, structures and platforms for Shell Dubai Steel Structure Design and detailing of Dalda 300 Tons plant gr + 8 floors +roof shed. Design and detailing of sheds of Engro chemicals. Design and detailing of sheds for Shell Kemari Pakistan Detailing of following steel structures: Richmond San Rafeal Bridge, State of California. 101 Bay shore Boulevard Bridge over river crossing third street Rail MR-1144 city of San Francisco. Detailing of following steel structures using Software X-Steel: Steam Power Plant at site Madinatul Yanbu Al-Sinaiyah Arabian International Company (AIC) King Fisher Project (AIC). Oman India Fertilizer Co. Project. Cherat Cement Plant Co. Ltd. Nowshera Buildings: Dubai Police Band Rehearsal Building Dubai Police Football Stadium Rabia Enclave Federal Urdu University Karachi Administration Block Federal Urdu University Karachi Academic Block Dean Office Building of Karachi University Camp Office Building of Malir Development Authority Main Gate of Malir Development Authority Hashim Eye Hospital of Jinnah Post Graduate Medical Centre Samrina Tower Hut of KPT Engineering Masjid-e-Anwar Building on plot No. SB-9, Sector 11-A, North Karachi Building on plot No. C-60, Defence Housing Authority, Karachi
Page 2 of 4

PERSONAL PROFILE
Employee No: 0010

Vetting: 16 Storied Building on plot No. SB-21, Scheme 33, Gulshan-e-Iqbal, Karachi 16 Storied Building on plot No. 18, Firdous Cooperative Housing Society, Karachi
Industrial: Shujabad Textiles Mills Ltd. Fazal Rahman Fabrics Rizwan Textile Bhanero Textiles Industries Fazal Cloth Mills Ruby Textile Mills Gul Ahmed Textiles North Star Textile Shafi Textile Shahbaz Garments Yahya Spinning Mills Ghotki Sugar Mills : Main Mill, Power House, Substation, Power House, Admin Block & Labour Block Dawlance Industry Pvt. Ltd. Dawood Engineering Pvt. Ltd. Candy Biscuit Factory Khadija oil Refinery Filling Station
Water Storage/Supply Structures : Chanda Fateh Khan Dam, Kohat Auxiliary Kander Dam, Kohat CODES UTILIZED: Uniform Building code 1987 ACI code API AISC/LRFD AASHTO WEST PAKISTAN HIGHWAY CODE
COMPUTER SKILLS: ETABS 9.5 SAFE 9.1.1 SAP 14 STAAD PRO 2007 X-STEEL(detailing of steel structure) PCACOL MICROFEAP RCC DESIGN SOFTWARES (In-House Software) AUTOCAD 2010 MS-OFFICE
AFFILIATIONS Life Member PEC (Pakistan Engineering Council)
Page 3 of 4

PERSONAL PROFILE
Employee No: 0010

PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 26th March 1965 Pakistani Islam Married English and Urdu
Page 4 of 4

Name: Jawed Ahsan
PERSONAL PROFILE
Employee No: 0011
Designation: Consultant Inspections & Integrity Management

EDUCATION B.E Mechanical Engineering NED University of Engineering & Technology Karachi, Pakistan TRAINING / COURSES Basic Level Vibration Analysis (SKF) Authorized Pressure Vessel Inspector ( API-510) ( American Petroleum Institute) Level - 2 in Radiographic Testing (PAEC) Level - 2 in Radiographic Testing (Recertification) Level - 1 in Ultrasonic Testing CWB(Canadian Welding Bureau) Welding Inspector Attended a Course on ISO - 9000 2008 2004 1997 2003 2002 2004 1996 1993
EMPLOYMENT HISTORY Present

Consultant Inspections Global PMC (Private) Limited Karachi, Pakistan July 2010 to-date
Previous Enar Petrotech Services Pvt. Ltd. Inspection Engineer Pak Arab Fertilizer Section Head (Inspection) Ranhill Inspection Engineer Nespak Sr.Engineer Sefec Engineering ( Pvt.) Ltd. Quality Control Engineer Nov 2008 to Nov 2009 Oct 2006 to Oct 2008 Sept 2003 to Sept 2006 July 2000- August 2003 Feb 1993 to June 2000
EXPERIENCE PROFILE Present

As a Consultant Inspection leading a team of Inspection Engineers for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant, textile industries, operation & maintenance services, regulatory compliance & safety audits, pre-shipment inspections, HAZOPs and other related projects.
Previous Have more than seventeen years experience in the field of Inspection of Pressure equipment as per API-510, performed basic pressure and thickness calculations for Pressure Vessels, Recommended repair Welding Procedures for defects in various Carbon Steel and Stainless Steel. Performed DPT & MT. Performed UT thickness readings. Failure investigation and fitness assessment of Pressure Vessels, Heat Exchangers, Tanks, Piping etc, External and Internal Inspection of Pressure Equipment, Risk based Inspection, Arranged Profile Radiography, UT
Page 1 of 2

Name: Jawed Ahsan
PERSONAL PROFILE
Employee No: 0011
Designation: Consultant Inspections & Integrity Management

Scanning, H Scanning of Furnace Tubes, Review of plant P&IDs/Drawings/inspection isometrics /integrity review documents, inspection planning, Inspection of on-going pressure vessels, Review & interpretation of inspection results, Evaluation of the long-term/short-term corrosion rates, assessment of remaining life & future inspection intervals, Recommendations to the owner/user, Inspection during repair of the heaters, review of welding procedures/parameters, non-destructive tests etc, Review of reports of advanced inspection techniques like IRIS, RFEC, Non Intrusive Corrosion Mapping, prepared inspection reports for columns, heat exchangers, heaters, tanks, pressure vessels, Familiar with activities related to flow line inspections, Inspection of flow lines, Familiar with the Well configuration, X-mas Tree Valves & piping related issues ,Familiar with activities related to calibration of pressure relief devices & calibration witnessing, General visual examinations & familiar with inspection techniques for the tanks
Project Dismantling of NH3 Plant in Netherlands: Adhi LPG/NGL Plant II Turn Around 2005 Engro Asahi Plant Lahore International Airport Project SHUT DOWN -2000 ICI PTA PLANT ENGRO ASAHI PVC PLANT FABRICATION OF DOCK LIFT STRUCTURE HABIBULLAH COASTAL POWER PLANT LIBERTY POWER PLANT PROJECT QAISAR LUCKY PETROCHEMICAL PROJECT DG KHAN CEMENT, MAPLE LEAF CEMENT Client Pak Arab Fertilizer PPL Engro Asahi CAA ICI Pakistan Engro Dockyard Babcock Wilcox Gama(Turkey) & Fiat Avio (Italy) Ansaldo (Italy) & Siemens QAISAR LUCKY PETROCHEMICAL F.L Smith (Denmark) Responsibility Section Head Sr. Inspection Engineer Inspector Sr. Engineer Inspector Sr. Assistant Manager Sr. Assistant Manager Sr. Assistant Manager Sr. Assistant Manager Sr. Assistant Manager Sr. Assistant Manager
COMPUTER SKILLS
MS Office, MS Project, Autocad & ther related engineering softwares
AFFILIATIONS Life Member PEC (Pakistan Engineering Council) PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 11th March 1967 Pakistani Islam Married English and Urdu
Page 2 of 2

Name: Farooq Mannan Designation: Sr. Design Engineer, Civil
EDUCATION MBA (Evening Session) Institute of Business Administration (IBA), Pakistan 17 out of 25 courses completed; CGPA 3.0
PERSONAL PROFILE
Employee No: 016
2011
BE - Civil Engineering (Batch 1998-1999), NED University of Engineering and Technology, Pakistan 6th position, 87%
2003
TRAINING / COURSES Grid Leadership Seismic Analysis & Design Durable Concrete Construction Project Management Framework Problem Solving & Decision Making Skills Tekla Structure (X-Steel) Software Micro Station Software SPR & NavisWorks Software Primavera Project Planner P3 (version 6.0) PSTD, PAK NED, PAK NED, PAK PIMS, PAK PIMS, PAK JGC-Descon (In-house) JGC-Descon (In-house) JGC-Descon (In-house) JGC-Descon (In-house) 2010 2006 2006 2008 2008 2009 2009 2009 2010
EMPLOYMENT HISTORY Present Sr. Design Engineer, Civil Global PMC (Private) Limited Karachi, Pakistan Previous Design Engineer, Civil November 2006 - November 2010 DIPL (formerly JGC-DESCON Engineering (Pvt.) Limited) Karachi, Pakistan Engineer, Civil National Engineering Services Pakistan (Pvt.) Ltd. (NESPAK) April 2003 to November 2006 July 2011 to-date
EXPERIENCE PROFILE Present As Senior Design Engineer, Global PMC (Private) Limited, heading a team of Design Engineers & Draftspersons for providing services to oil & gas, petroleum refining, chemicals, petrochemicals, storage terminals, pipeline, power plant and other related projects. Page 1 of 3

Previous
PERSONAL PROFILE
Employee No: 016
- Project Lead for Civil Scope - Analysis and Design of structures and foundations for misc equipments like GTG, Oil Tanks, and Transformers etc. - Design of Underground Networks (Storm water, Oily water & Sewerage) - Preparation of Design Criteria, Bill of Quantity & Material Take-Off - Preparation of detailed Structural Drawings - Interdisciplinary Coordinationb/w all departments - Meeting and Negotiations with Client - Correspondence with Vendors Project Description Manifa Gas Oil Separation Facility (GOSP): DIPL, formerly JGC-Descon Engg. Pvt. Ltd. Client Responsibility Design Engineer Scope included detailed engineering and design of multi-tier pipe racks, platforms, structural and equipment foundations, etc. Lead Engineer Scope included management of complete project, design of foundations for GTG, Auxiliaries, Miscellaneous Tanks and Pumps along with design of Culverts and Trenches, Complete underground drainage network, Pipe sleepers, Roads & Paving, Fencing and Security Lighting. Area Lead Engineer Scope included Pipe racks and their Foundations, Miscellaneous equipment foundations, Culverts along with Evaporation Pond. Design Engineer Scope included new multi floor steel structure, to support Reaction Vessel, Catch Pot & Condensers. Piled foundations were provided. Lead Engineer Scope included development of a new Wellhead facility at Sawan. Design Engineer Scope included detailed engineering and design of multi-tier pipe racks, platforms, structural and equipment foundations, etc. Design Engineer Scope included detailed engineering and design of RCC underpass with pre-stressed post tensioned deck slab following concerned speciation of AASHTO. Vetting Engineer Scope included vetting of post tension box girder bridge as per AASHTO specifications. Further, pile foundation, piers, transoms were also vetted. Design Engineer Scope included detailed analysis and design of sixteen (16) Storey commercial concrete building with Shear Walls to cater for major portion of seismic & wind loads. Piled raft foundation was provided.
Saudi Aramco
Sharourah Power Plant: (DIPL, formerly JGC-Descon Engg. Pvt. Ltd.)
Saudi Electric Company (SEC)
Civil Works (Utilities) for New Ammonia/Urea Complex (DIPL, formerly JGC-Descon Engg. Pvt. Ltd. FEDM for Chemical Plant Expansion Project: (DIPL, formerly JGC-Descon Engg. Pvt. Ltd. Sawan 11: Wellhead Development Project: (DIPL, formerly JGC-Descon Engg. Pvt. Ltd. Hydrogen Per Oxide Project: (DIPL, formerly JGC-Descon Engg. Pvt. Ltd. KPT Underpass (NESPAK)
Engro Chemical Pakistan Limited (ECPL)
ICI Chemicals, Pakistan
OMV Ltd. Pakistan
Oxychem Ltd.
Karachi Port Trust Pakistan
FTC Flyover, Pakistan: (NESPAK)
Karachi Port Trust Pakistan
Islamabad Stock Exchange Towers, Pakistan: (NESPAK)
Islamabad Stock Exchange
Page 2 of 3

Sialkot International Airport, Pakistan (NESPAK) Sailkot International Airport
PERSONAL PROFILE
Employee No: 016
Najran Airport (NESPAK)
Najran Internationals Saudi Arabia
JF-17 Thunder, Kamra (NESPAK) Construction of 132kV Grid Station (NESPAK) 220kV & 132kV GIS Grid Station for System Improvement (NESPAK) National University of Science & Technology, Pakistan (NESPAK) Pakistan International Container Terminal, Pakistan (NESPAK) Foreign Office Lodges (Apartments), Islamabad (NESPAK) COMPUTER SKILLS
Kamra Paksitan DHA, Karachi
Design Engineer Scope included detailed analysis and design of concrete building. Terminal Building, FCR & Control Tower, Overhead Water Tank, Cargo Building, Main Distribution Station & Maintenance Office. Design Engineer Scope included analysis and design of concrete building. Royal Terminal, Cargo Building, Fire Station, Administration Building, Two Vault Stations, Utility Building, Electric Substations & Underground Tanks. Design Engineer Scope included analysis and design of industrial sheds for misc. requirements. Some sheds were preengineered design and vetting was done accordingly. Design Engineer Scope included detailed analysis and design of amenities and building for complete scope. Design Engineer Scope included detailed analysis and design of 11kv Switch Gear & GIS grid station. Design Engineer Scope included detailed analysis and design of two large multistory buildings. Design Engineer Scope included detailed analysis and design of multipurpose facilities like RTG Runway Beams and Shed with Pre stressed double tee roofing system. Design Engineer Scope included detailed analysis and design ground plus two-story apartments.
KESC, Karachi
NUST
PICT Foreign Office Lodges Islamabad
SAP2000, Etabs, StaadPro, Safe, PCACol, Tekla Structures (X-Steel), Micro Station, NavisWorks, Smart Plant Review (SPR), AutoCAD, Primavera P3, MS Office CODES & STANDARDS ACI, UBC, AASHTO, DIN, ASCE, ASTM, AISC ASD & LRFD, BS, EIA-TIA-222-F, West Pakistan Highway Codes, Saudi ARAMCO Standards, JPEP (JGC's Design Standards) AFFILIATIONS Member PEC (Pakistan Engineering Council), PAK
PERSONAL Date of Birth Nationality Religion Marital Status Languages : : : : : 10th March 1981 Pakistani Islam Married English and Urdu
Page 3 of 3

Globalpmc - Doc - Rev 4

Uploaded by

Copyright:

Available Formats

Globalpmc - Doc - Rev 4

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Globalpmc - Doc - Rev 4

Uploaded by

Copyright:

Available Formats

What services does Global PMC provide?

What services does Global PMC provide?

What are Global PMC's core values?

What are Global PMC's core values?

Global PMC (Private) Limited

The Project Management Consultants

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

8) OUR CORPORATE GOVERNANCE

9) OUR CORE COMPETENCY

GPMC profile (Rev. 1) 16-05-12

10) OUR EXPERIENCE

Major Clients inside Pakistan

GPMC profile (Rev. 1) 16-05-12

Major Clients outside Pakistan

a) Project Management Consultancy Services

b) Regulatory Compliance Audits

c) Inspections & Asset Valuation

GPMC profile (Rev. 1) 16-05-12

e) Engineering Services for Upstream & Downstream Projects:

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

Lead Process Engineer for De bottlenecking study of Yanbu Refinery

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

12) OUR TECHNICAL LIBRARY

13) OUR ENGINEERING RESOURCES

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

NATIONAL TAX NUMBER

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

PAKISTAN ENGINEERING COUNCIL REGISTRATION CERTIFICATE

GPMC profile (Rev. 1) 16-05-12

GPMC profile (Rev. 1) 16-05-12

RESUMES OF KEY PERSONS

GPMC profile (Rev. 1) 16-05-12

GLOBAL PMC (PRIVATE) LIMITED

Completed numerous study courses on General and Project Management.

Feb. 2011 to-date

Nov 2007 Feb. 2011

Mar 2006 Oct 2007

GLOBAL PMC (PRIVATE) LIMITED

Karachi School of Business

QADIRPUR 400MMSCFD PROJECT (ENAR Petrotech Service Pvt. Ltd)

Oil & Gas Development Company Ltd

Enar Petroleum Refining Facility (Apr. 98 to Dec.02)

GLOBAL PMC (PRIVATE) LIMITED

Bobi Early Production Facilities (ENAR Petrotech Service Pvt. Ltd).

Chanda Gas Processing Facility (ENAR Petrotech Service Pvt. Ltd).

Omar Phase IV (Syria) Water Injection Project. (Petrofac International L t d . )

Operations & Maintenance (National Refinery Limited)

National Refinery Limited, Karachi Mar.' 67 - Dec.' 78

GLOBAL PMC (PRIVATE) LIMITED

GLOBAL PMC (PRIVATE) LIMITED