A mobile phone (also known as a wireless phone, cell phone, or cellular telephone[1]) is a long-range, electronic device used for

mobile voice or data communication over a network of specialized base stations known as cell sites. In addition to the standard voice function of a mobile phone, telephone, current mobile phones may support many additional services, and accessories, such as SMS for text messaging, email, packet switching for access to the Internet, gaming, Bluetooth, infrared, camera with video recorder and MMS for sending and receiving photos and video, MP3 player, radio and GPS. Most current mobile phones connect to a cellular network of base stations (cell sites), which is in turn interconnected to the public switched telephone network (PSTN) (the exception is satellite phones). HISTORY In 1908, U.S. Patent 887,357 for a wireless telephone was issued in to Nathan B. Stubblefield of Murray, Kentucky. He applied this patent to "cave radio" telephones and not directly to cellular telephony as the term is currently understood. [54] Cells for mobile phone base stations were invented in 1947 by Bell Labs engineers at AT&T and further developed by Bell Labs during the 1960s. Radiophones have a long and varied history going back to Reginald Fessenden's invention and shore-to-ship demonstration of radio telephony, through the Second World War with military use of radio telephony links and civil services in the 1950s, while hand-held cellular radio devices have been available since 1973. A patent for the first wireless phone as we know today was issued in US Patent Number 3,449,750 to George Sweigert of Euclid, Ohio on June 10th, 1969. In 1945, the zero generation (0G) of mobile telephones was introduced. 0G mobile phones, such as Mobile Telephone Service, were not cellular, and so did not feature "handover" from one base station to the next and reuse of radio frequency channels. [citation needed] Like other technologies of the time, it involved a single, powerful base station covering a wide area, and each telephone would effectively monopolize a channel over that whole area while in use. The concepts of frequency reuse and handoff as well as a number of other concepts that formed the basis of modern

cell phone technology are first described in U.S. Patent 4,152,647 , issued May 1, 1979 to Charles A. Gladden and Martin H. Parelman, both of Las Vegas, Nevada and assigned by them to the United States Government. This is the first embodiment of all the concepts that formed the basis of the next major step in mobile telephony, the Analog cellular telephone. Concepts covered in this patent (cited in at least 34 other patents) also were later extended to several satellite communication systems. Later updating of the cellular system to a digital system credits this patent. Martin Cooper, a Motorola researcher and executive is widely considered to be the inventor of the first practical mobile phone for handheld use in a non-vehicle setting. Cooper is the inventor named on "Radio telephone system" filed on October 17, 1973 with the US Patent Office and later issued as US Patent 3,906,166. [55] Using a modern, if somewhat heavy portable handset, Cooper made the first call on a handheld mobile phone on April 3, 1973 to a rival, Dr. Joel S. Engel of Bell Labs.[56] The first commercial citywide cellular network was launched in Japan by NTT in 1979. Fully automatic cellular networks were first introduced in the early to mid 1980s (the 1G generation). The Nordic Mobile Telephone (NMT) system went online in Denmark, Finland, Norway and Sweden in 1981.[57] In 1983, Motorola DynaTAC was the first approved mobile phone by FCC in the United States. In 1984, Bell Labs developed modern commercial cellular technology (based, to a large extent, on the Gladden, Parelman Patent), which employed multiple, centrally controlled base stations (cell sites), each providing service to a small area (a cell). The cell sites would be set up such that cells partially overlapped. In a cellular system, a signal between a base station (cell site) and a terminal (phone) only need be strong enough to reach between the two, so the same channel can be used simultaneously for separate conversations in different cells. Cellular systems required several leaps of technology, including handover, which allowed a conversation to continue as a mobile

phone traveled from cell to cell. This system included variable transmission power in both the base stations and the telephones (controlled by the base stations), which allowed range and cell size to vary. As the system expanded and neared capacity, the ability to reduce transmission power allowed new cells to be added, resulting in more, smaller cells and thus more capacity. The evidence of this growth can still be seen in the many older, tall cell site towers with no antennae on the upper parts of their towers. These sites originally created large cells, and so had their antennae mounted atop high towers; the towers were designed so that as the system expandedand cell sizes shrankthe antennae could be lowered on their original masts to reduce range. The first "modern" network technology on digital 2G (second generation) cellular technology was launched by Radiolinja (now part of Elisa Group) in 1991 in Finland on the GSM standard which also marked the introduction of competition in mobile telecoms when Radiolinja challenged incumbent Telecom Finland (now part of TeliaSonera) who ran a 1G NMT network. The first data services appeared on mobile phones starting with person-to-person SMS text messaging in Finland in 1993. First trial payments using a mobile phone to pay for a Coca Cola vending machine were set in Finland in 1998. The first commercial payments were mobile parking trialled in Sweden but first commercially launched in Norway in 1999. The first commercial payment system to mimick banks and credit cards was launched in the Philippines in 1999 simultaneously by mobile operators Globe and Smart. The first content sold to mobile phones was the ringing tone, first launched in 1998 in Finland. The first full internet service on mobile phones was i-Mode introduced by NTT DoCoMo in Japan in 1999. In 2001 the first commercial launch of 3G (Third Generation) was again in Japan by NTT DoCoMo on the WCDMA standard.[58] Until the early 1990s, most mobile phones were too large to be carried in a jacket pocket, so they were typically installed in vehicles as car phones. With the miniaturization of digital

components and the development of more sophisticated batteries, mobile phones have become smaller and lighter. With its use by Nokia as the default ringtone, The Gran Vals by Francisco Tarrega has become arguably the most recognised tune in the world

Cellular systems
Mobile phones send and receive radio signals with any number of cell site base stations fitted with microwave antennas. These sites are usually mounted on a tower, pole or building, located throughout populated areas, then connected to a cabled communication network and switching system. The phones have a low-power transceiver that transmits voice and data to the nearest cell sites, normally not more than 8 to 13 km (approximately 5 to 8 miles) away. When the mobile phone or data device is turned on, it registers with the mobile telephone exchange, or switch, with its unique identifiers, and can then be alerted by the mobile switch when there is an incoming telephone call. The handset constantly listens for the strongest signal being received from the surrounding base stations, and is able to switch seamlessly between sites. As the user moves around the network, the "handoffs" are performed to allow the device to switch sites without interrupting the call. Cell sites have relatively low-power (often only one or two watts) radio transmitters which broadcast their presence and relay communications between the mobile handsets and the switch. The switch in turn connects the call to another subscriber of the same wireless service provider or to the public telephone network, which includes the networks of other wireless carriers. Many of these sites are camouflaged to blend with existing environments, particularly in scenic areas. The dialogue between the handset and the cell site is a stream of digital data that includes digitised audio (except for the first generation analog networks). The technology that achieves this

depends on the system which the mobile phone operator has adopted. The technologies are grouped by generation. The firstgeneration systems started in 1979 with Japan, are all analog and include AMPS and NMT. Second-generation systems, started in 1991 in Finland, are all digital and include GSM, CDMA and TDMA. The nature of cellular technology renders many phones vulnerable to 'cloning': anytime a cell phone moves out of coverage (for example, in a road tunnel), when the signal is reestablished, the phone sends out a 're-connect' signal to the nearest cell-tower, identifying itself and signalling that it is again ready to transmit. With the proper equipment, it's possible to intercept the re-connect signal and encode the data it contains into a 'blank' phone -- in all respects, the 'blank' is then an exact duplicate of the real phone and any calls made on the 'clone' will be charged to the original account. Third-generation (3G) networks, which are still being deployed, began in Japan in 2001. They are all digital, and offer high-speed data access in addition to voice services and include W-CDMA (known also as UMTS), and CDMA2000 EV-DO. China will launch a third generation technology on the TD-SCDMA standard. Operators use a mix of predesignated frequency bands determined by the network requirements and local regulations. In an effort to limit the potential harm from having a transmitter close to the user's body, the first fixed/mobile cellular phones that had a separate transmitter, vehicle-mounted antenna, and handset (known as car phones and bag phones) were limited to a maximum 3 watts Effective Radiated Power. Modern handheld cellphones which must have the transmission antenna held inches from the user's skull are limited to a maximum transmission power of 0.6 watts ERP. Regardless of the potential biological effects, the reduced transmission range of modern handheld phones limits their usefulness in rural locations as compared to car/bag phones, and handhelds require that cell towers be spaced much closer together to compensate for their lack of transmission power.

Some handhelds include an optional auxiliary antenna port on the back of the phone, which allows it to be connected to a large external antenna and a 3 watt cellular booster. Alternately in fringe-reception areas, a cellular repeater may be used, which uses a long distance high-gain dish antenna or yagi antenna to communicate with a cell tower far outside of normal range, and a repeater to rebroadcast on a small short-range local antenna that allows any cellphone within a few meters to function properly.

SIM card
In addition to the battery, GSM cellphones require a small microchip, called a Subscriber Identity Module or SIM Card, to function. Approximately the size of a small postage stamp, the SIM Card is usually placed underneath the battery in the rear of the unit, and (when properly activated) stores the phone's configuration data, and information about the phone itself, such as which calling plan the subscriber is using. When the subscriber removes the SIM Card, it can be re-inserted into another phone and used as normal. Each SIM Card is activated by use of a unique numerical identifier; once activated, the identifier is locked down and the card is permanently locked in to the activating network. For this reason, most retailers refuse to accept the return of an activated SIM Card. Those cell phones that do not use a SIM Card have the data programmed in to their memory. This data is accessed by using a special digit sequence to access the "NAM" as in "Name" or number programming menu. From here, one can add information such as a new number for your phone, new Service Provider numbers, new emergency numbers, change their Authentication Key or A-Key code, and update their Preferred Roaming List or PRL. However, to prevent someone from accidentally disabling their phone or removing it from the network, the Service Provider puts a lock on this data called a Master Subsidiary Lock or MSL. The MSL also ensures that the Service Provider gets payment for the phone that was purchased or "leased". For example, the

Motorola RAZR V9C costs upwards of CAD $500. You can get one for approximately $200, depending on the carrier. The difference is paid by the customer in the form of a monthly bill. If the carrier did not use a MSL, then they may lose the $300$400 difference that is paid in the monthly bill, since some customers would cancel their service and take the phone to another carrier. The MSL applies to the SIM only so once the contract has been completed the MSL still applies to the SIM. The phone however, is also initially locked by the manufacturer into the Service Providers MSL. This lock may be disabled so that the phone can use other Service Providers SIM cards. Most phones purchased outside the US are unlocked phones because there are numerous Service Providers in close proximity to one another or have overlapping coverage. The cost to unlock a phone varies but is usually very cheap and is sometimes provided by independant phone vendors. Having an unlocked phone is extremely useful for travelers due to the high cost of using the MSL Service Providers access when outside the normal coverage areas. It can cost sometimes up to 10 times as much to use a locked phone overseas as in the normal service area, even with discounted rates. For example, in Jamaica, an AT&T subscriber might pay in excess of US$1.65 per minute for discounted international service while a B-Mobile (Jamaican) customer would pay US$0.20 per minute for the same international service. Some Service Providers focus sales on international sales while others focus on regional sales. For example, the same B-Mobile customer might pay more for local calls but less for international calls than a subscriber to the Jamaican national phone C&W (Cable & Wireless) company. These rate differences are mainly due to currency variations because SIM purchases are made in the local currency. In the US, this type of service competition does not exist because some of the major Service Providers do not offer Pay-As-You-Go services. [Needs Pay-As-You-Go references, rumored T-Mobile,Verizon provide one, AT&T does not as of 12/2008]

Power supply

Mobile phones generally obtain power from batteries, which can be recharged from a USB port, from portable batteries, from mains power or a cigarette lighter socket in a car using an adapter (often called battery charger or wall wart) or from a solar panel or a dynamo (that can also use a USB port to plug the phone). Formerly, the most common form of mobile phone batteries were nickel metal-hydride, as they have a low size and weight. LithiumIon batteries are sometimes used, as they are lighter and do not have the voltage depression that nickel metal-hydride batteries do. Many mobile phone manufacturers have now switched to using lithium-Polymer batteries as opposed to the older LithiumIon, the main advantages of this being even lower weight and the possibility to make the battery a shape other than strict cuboid. Mobile phone manufacturers have been experimenting with alternative power sources, including solar cells.