AAF Astrocel II Hepa

AstroCel II Dry Seal
High Quality HEPA and ULPA Filters for Dry Seal Applications
q Dedicated cleanroom and cleanbench filters q Filter classes H14, U15, U16 and U17 to EN1822 q Lightweight and easy to install q One-piece gasket provides perfect seal q Filters for ultra clean environments
AstroCel II one-piece gasket dry seal filters are designed for use in cleanrooms, cleanbenches, biohazard benches and other clean work stations. Classified H14, U15, U16 and U17 accordance with EN1822, these filters ensure the necessary levels of contamination control in cleanroom Resistance vs Face Velocity
Initial Resistance (Pa)
environments. The filters are compact, lightweight and easy to install in open plenum, terminal and in-line housing systems and cleanbenches and offer many additional benefits:
q Factory tested to meet the most
stringent legal and industry requirements. q High efficiency safeguards processes, products and workers. q Functional reliability: leak or scan tested.
300 250 200 150 100 50 0 0 0.3 0.45 0.6
U16 U15 H14
350 300 250 200 150 100 50 0
400 350 300 250 200 150 100 50 0 U16 U15 H14
U16 U15 H14
0.75
0.3
0.45
0.60
0.75
0.90
1.05
0.3
0.45
0.6
0.75
0.9
1.05
1.20
1.35
1.5
Face Velocity (m/s)
Face Velocity (m/s)
Face Velocity (m/s)
Filter depth 69 mm: 48 mm media pack
AstroCelII Dry Seal

An AstroCel II Dry Seal can be ordered using the following Component Code Definition System. Use the table to specify a product suitable to your application requirements. Standard Sizes and Ratings
Component Code Definition* A= E= B C D E Cell Sides Separators Bond Gasket Waterproof glass fibre Waterproof glass fibre
Size in mm without gasket H W D 203 203 69 305 305 69 305 610 69 305 762 69 305 915 69 457 457 69 457 610 69 610 610 69 610 762 69 610 915 69 610 1220 69 610 1524 69 610 1830 69 762 762 69 762 915 69 762 1220 69 762 1524 69 762 1830 69 915 915 69 915 1220 69 915 1524 69 915 1830 69 1220 1220 69 305 305 93 305 610 93 610 610 93 610 762 93 610 915 93 610 1220 93 762 762 93 305 305 117 457 457 117 610 610 117 610 762 117 610 915 117 610 1220 117 Airflow at 0.45 m/s m3/h m3/s 70 0.02 150 0.04 300 0.08 380 0.11 450 0.13 340 0.09 450 0.13 600 0.16 750 0.21 900 0.25 1200 0.33 1500 0.42 1800 0.50 940 0.26 1130 0.31 1500 0.42 1880 0.52 2260 0.63 1360 0.38 1800 0.50 2260 0.63 2710 0.75 2400 0.67 150 0.04 300 0.08 600 0.16 750 0.21 900 0.25 1200 0.33 940 0.26 150 0.04 340 0.09 600 0.16 750 0.21 900 0.25 1200 0.33
Selection Table
Item A Component Media**
M = Waterproof glass fibre 99 = Anodized aluminium extrusion, standard profile C = Thermoplastic 9= P= S= F Gasket Location 0= 2= 3= G Acceptance Level Cold cured resin No gasket 5 mm, half round profile, one piece foamed No gasket One face Both faces; one piece foamed, half round profile
T = 6 mm, flat profile
R = H14 Min. 99.995%, @ MPPS acc. to EN1822 M = U15 Min. 99.9995%, @ MPPS acc. to EN1822 N = U16 Min. 99.99995%, @ MPPS acc. to EN1822 T = U17 Min. 99.999995%, @ MPPS acc. to EN1822
Faceguard Location
0= 1= 2= 3= 4=
No faceguard, maximum size 610 x 1220 mm and/or 762 x 915 mm Non-gasket side only, media pack non-gasket side Gasket side only, media pack gasket side Both sides, media pack gasket side Both sides, media pack non-gasket side
Options
Consult local sales office
Notes: - Recommended final resistance 500 Pa. - Temperature limit: 70C
* Bold typeface: standard execution For Fluid Seal or Knife Edge execution consult specification sheets RA-4-732 and RA-4-742. ** To be determind by AAF engineering.
Initial resistance table at nominal airflow

Depth (mm) 69 93 H14 125 90 75 U15 145 105 80
Supplier Rate: Int Resistance : 0.7"wg
Class U16 165 125 90 U17 110
How to Order Below a typical example of how to order a standard AstroCel II Dry Seal filter using the Component Code Definition System. Item Component Definition A A B 99 C C D 9 E S F 2 G R H 3 I -
117
Efficiency
Efficiency @ 0.3 m 99.999% @ 0.12 m 99.9995% 99.99995% 99.999995% Efficiency EN1822 @ MPPS H14 99.995% U15 U16 U17 99.9995% 99.99995% 99.999995%
AAF-International B.V. P.O. Box 7928 1008 AC Amsterdam The Netherlands Tel.: + 31 20 549 44 11 Fax: + 31 20 644 43 98
International AAF Offices: Vienna (A), Montreal (CDN), Brussels (B), Dortmund (D), Vitoria (E), Paris (F), Cramlington (GB), Athens (GR), Milan (I), Riyadh (KSA), Mexico (Mex), Amsterdam (NL), Singapore, Istanbul (TR), Louisville, Ky (USA)
AAF Agents: Copenhagen (DK), Bangalore (IND) Oslo (N), Lisbon (P), Johannesburg (RSA), Dalsjfors (S), Malm (S), Helsinki (SF)
AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice. RA-4-702-IN-3-0400 2000 AAF International

AAF Astrocel II Hepa

Uploaded by

Copyright:

Available Formats

AAF Astrocel II Hepa

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AAF Astrocel II Hepa

Uploaded by

Copyright:

Available Formats

AstroCel II Dry Seal

q Factory tested to meet the most

Initial Resistance (Pa)

300 250 200 150 100 50 0 0 0.3 0.45 0.6

Initial Resistance (Pa)

U16 U15 H14

350 300 250 200 150 100 50 0

U16 U15 H14

Face Velocity (m/s)

Face Velocity (m/s)

Face Velocity (m/s)

Filter depth 69 mm: 48 mm media pack

Filter depth 93 mm: 72 mm media pack

Filter depth 117 mm: 96 mm media pack

AstroCelII Dry Seal

T = 6 mm, flat profile

Consult local sales office

Notes: - Recommended final resistance 500 Pa. - Temperature limit: 70C

Initial resistance table at nominal airflow

Supplier Rate: Int Resistance : 0.7"wg

Class U16 165 125 90 U17 110

You might also like