DIGIPLEXER SOUND PROCESS

V.1.9.x USER MANUAL Sound processing application for Digiplexer 2/4, Digiplexer 246 and NEXT FM

powered

Date : 2009/12/03

audemat WordCast Systems Group web: www.audemat.com - e-mail: [email protected]

Digiplexer Sound Process, user manual 12/2009

TABLE OF CONTENTS

1. QUICK START .....................................................................................................................................4 1.1. Checking connections .................................................................................................................4 1.2. Connecting to the application ......................................................................................................4 1.2.1. From the remote application ..................................................................................................4 1.2.2. From the front panel application ............................................................................................5 1.3. Setting Inputs ..............................................................................................................................5 1.4. Setting the MPX output ...............................................................................................................7 1.5. Selecting the preset ....................................................................................................................7 2. LAUNCHING THE APPLICATION ......................................................................................................8 3. APPLICATION OVERVIEW BASIC PRINCIPLES.........................................................................10 3.1. From the remote application .....................................................................................................10 3.1.1. Slider bars ............................................................................................................................10 3.1.2. Edit fields..............................................................................................................................10 3.1.3. Keyboard commands ...........................................................................................................10 3.2. From the front panel application................................................................................................11 4. MAIN SCREEN DESCRIPTION .........................................................................................................12 5. TOP PANEL .......................................................................................................................................13 5.1. CHANNEL .................................................................................................................................13 5.2. ON AIR ......................................................................................................................................13 5.3. Accessing the ON AIR Preset log ...........................................................................................13 5.4. Undo/Redo ................................................................................................................................14 5.5. Compare Work/Ref preset ......................................................................................................14 5.6. On Air Preset History ................................................................................................................15 5.7. Preset management ..................................................................................................................16 5.7.1. Save As ................................................................................................................................16 5.7.2. Preset ...................................................................................................................................17 5.7.3. New ......................................................................................................................................18 5.7.4. Security ................................................................................................................................19 5.8. Setup .........................................................................................................................................21 5.8.1. General ................................................................................................................................21 5.8.2. Users ....................................................................................................................................22 5.8.3. Preset Settings .....................................................................................................................25 5.8.4. Analog & Digital Input ..........................................................................................................26 5.8.5. Analog & Digital Outputs ......................................................................................................27 5.8.6. Stereo Generator & MPX Output .........................................................................................28 5.8.7. MPX Power Control..............................................................................................................29 5.8.8. Upgrade ...............................................................................................................................30 5.8.9. Backup / Restore..................................................................................................................30 5.8.10. Test Generator .....................................................................................................................31 5.8.11. Calibrate ...............................................................................................................................31 6. CONFIGURABLE VU METER PANEL ..............................................................................................32 6.1. Customize the configurable VU meter panel ............................................................................32 7. DIAGRAM PANEL .............................................................................................................................33 8. SOUND WORKSPACE ......................................................................................................................34 8.1. Groups of functions ...................................................................................................................34 8.2. Easy or Full mode .....................................................................................................................34 9. PROCESSING FUNCTIONS DESCRIPTION ...................................................................................35 9.1. WIDE BAND AGC .....................................................................................................................35 9.1.1. GATE THRES ......................................................................................................................35
Page 2 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.1.2. DRIVE ..................................................................................................................................35 9.1.3. ATTACK ...............................................................................................................................35 9.1.4. RELEASE.............................................................................................................................35 9.1.5. AGC VU meter .....................................................................................................................36 9.2. TONE FX ...................................................................................................................................36 9.2.1. Tone FX, Easy mode ...........................................................................................................36 9.2.2. Tone FX, Full mode..............................................................................................................36 9.3. STEREO FX ..............................................................................................................................37 9.3.1. WIDTH .................................................................................................................................37 9.3.2. LIMITER ...............................................................................................................................37 9.3.3. The Stereo FX VU meter .....................................................................................................37 9.4. MULTI BAND PROCESS ..........................................................................................................37 9.4.1. Multi Band Process, Easy mode ..........................................................................................37 9.4.2. Multi Band Process, Full mode ............................................................................................38 9.4.3. GATE ...................................................................................................................................38 9.4.4. DOWN EXP..........................................................................................................................38 9.4.5. FIDELITY .............................................................................................................................39 9.4.6. S.I.S Sound Impact System ..............................................................................................39 9.4.7. DRIVE ..................................................................................................................................39 9.4.8. RATIO ..................................................................................................................................39 9.4.9. Thresh ..................................................................................................................................39 9.4.10. Attack ...................................................................................................................................40 9.4.11. Release ................................................................................................................................40 9.4.12. The multi Band Process VU meters .....................................................................................41 9.5. MULTI BAND LIMITER .............................................................................................................41 9.5.1. Multi Band Limiter, Easy mode ............................................................................................41 9.5.2. Multi Band Limiter, Full mode ..............................................................................................41 9.5.3. Drive .....................................................................................................................................41 9.5.4. Thresh ..................................................................................................................................41 9.5.5. Mix ........................................................................................................................................41 9.5.6. The multi band Limiter VU meters .......................................................................................42 9.6. FINAL LIMITER .........................................................................................................................42 9.6.1. HF Limiter Drive ...................................................................................................................42 9.6.2. HD Limiter Drive ...................................................................................................................42 9.6.3. FM LIM DRIVE for the FM Limiter........................................................................................42 9.6.4. VIRTUAL MPX LIMIT ...........................................................................................................43 10. 1-BAND FACTORY PRESETS ........................................................................................................44 11. 2-BAND FACTORY PRESETS ........................................................................................................45 11.1. Wide Band presets ....................................................................................................................45 11.2. 2 band presets list .....................................................................................................................46 12. 4-BAND FACTORY PRESETS ........................................................................................................47 12.1. Wide Band presets ....................................................................................................................47 12.2. 4 band presets list .....................................................................................................................48

Page 3 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

1. QUICK START

1.1. Checking connections

Example of configuration: External audio cable: send an audio source on the analog or digital input. Connect to transmitter

1.2. Connecting to the application

1.2.1. From the remote application

a)

From the Radio all in one application, click the Process button to launch the application, or from the front panel, touch the Sound4 button. You may also go to the Sart button Programs Audemat Digiplexer Sound Process.

b) Click on the "New" button to create a new connection.

c) Enter connection information. If you do not know your units IP address, check it on the front panel (see Quick Start notice). Default user name and password are: Admin / admin.

d)

Click on the OK button to validate the new connection.

e) Click on the Launch button and wait for the application to connect to the unit.

Page 4 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

1.2.2.

From the front panel application

You may not connect to the application via the front panel with a Digiplexer 2/4.

Touch the Process button and enter login and password. Default: Admin / admin. When the cursor is in a text box, a keyboard automatically appears. Enter the value and touch ENTER to validate and hide the keyboard. More keyboards are available with the 123 key for additional characters.

1.3. Setting Inputs

a) Click on the Setup button, and on "Inputs : Analog / Digital to set inputs:

Page 5 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

Make sure the Backup mode is set to Backup (1).Set input priority order first in the Default input source section (2). For instance: main source: Digital; 1st backup source: analogic; 2nd backup source: PCI. 3 Set levels for each input in the "Input levels" section (3). Once levels are roperly set, corresponding "Input meters section (4) give maximum peaks of 0dBfs.

WARNING: badly adjusted levels may lead to a degradation of the audio quality (saturation, loss of power) The input setting window may be closed. In the left panel, check that inputs have been set properly:

The arrow indicates which input is activated, OK means a signal is detected.

Page 6 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

1.4. .4. Setting the MPX output

Click on St gene / MPX output from the Setup window. In the "General Settings section (1), set the pre-emphasis according to the country. 1 In the Levels section (2), set the output levels. Close all setup windows. 2

1.5. Selecting the preset

Click on the Preset button.

Double-click on a preset from the list to select it. You are On Air!

Page 7 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

2. LAUNCHING THE APPLICATION

These procedures are only available from the remote application. From the Radio all in one application, click Process:

A tool bar will let you do the following: Launch the connection.

Create a new connection.

Edit an existing connection.

Delete an existing connection.

Display connections in list view or icon view.

Sort connections by name, city or date.

Access 3 additional functions: Delete all existing connections. Import connection parameters saved in an xml file. Export connection parameters in an xml file.

Page 8 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

Create a new connection:

Enter the Digiplexers IP address. If AutoConnect = Yes, user name and password will be used automatically; a double click on the connection line or a click on the Launch button will launch the connection. If AutoConnect = No, a login window will be displayed first.

Enter the login and password

Page 9 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

3. APPLICATION OVERVIEW BASIC PRINCIPLES

It is important to properly understand the slider bars working principle in order to maximize their efficiency and better utilize your equipment. The application sliders are virtual potentiometers that you will use to tune levels and frequencies. Their range appears in blue and an orange line shows the set value. The numerical value is displayed on the right of the bar.

3.1.
3.1.1.

From the remote application

Slider bars Click and drag the orange bar to the left (for a lower value) or to the right (for a higher value). Position the mouse cursor on the bar and scroll the mouse wheel towards the top (for a higher value) or the bottom (for a lower value). Position the mouse cursor on the bar and use the keyboard Up arrow (for a higher value) and Down arrow (for a lower value) keys, or Page Up and Page-Down for larger increments.

There are three methods to change a value:

The slider bar will blink after being changed so it is easy to see what modifications have just been made. A small switch is present on most slider bars: functions can be activated or deactivated according to your needs. When the function is deactivated the entire bar will be grey. switch Activated function Deactivated function

3.1.2.

Edit fields

The value displayed to the right of the bars can also be modified: click on the value, it will be highlighted and you can then enter a new value with the keyboard. Press "Enter" to confirm the new setting. The value remains highlighted should you need to modify it again. Press "Enter" a second time to exit the Edit mode. The background color of text fields is gray until modified. It then becomes orange so it is easy to see what modifications have been made. It will remain orange until the preset has been saved. It is therefore easy to view at a glance all of the new changes. 3.1.3. Keyboard commands Command keyboard commands have been implemented in the Sound 4 application. The following commands are available: To open a list of presets = Ctrl+O To save the current preset = Ctrl+S To undo a modification = Ctrl+Z To restore a modification previously undone = Ctrl+Shift+Z

Page 10 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

3.2. From the front panel application

The application is not available on the Digiplexer 2/4s front panel.

To modify a value, use the keypad that pops up when activating a text box. Lower or raise the value in steps.

Lower or raise the value by one for whole numbers and by 0.1 for decimal values.

Validate the new value. The button then turns into a Close and allows you to mask the keypad.

Delete the value.

Cancel modifications and displays the last recorded value.

Page 11 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

4. MAIN SCREEN DESCRIPTION

Top panel VU meter panel

Diagram panel Sound workspace

Page 12 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5. TOP PANEL

5.1. CHANNEL

Nowadays, broadcasters often work with more than one radio program. Therefore, they use several signal processors. It is then crucial to know which processor is being accessed so as to avoid errors. That is what the editable field Channel is for. Changes can be done from the SETUP window (see section 4.7).

5.2. ON AIR

It is the current preset. When the user has made changes the phrase not saved will be displayed in the text zone until the changes have been saved.

5.3. Accessing the ON AIR Preset log

This button can be found to the right of the On Air display. Click on it to open the following window that will give you access to the preset information and edit log:

In the Preset Log section, the user may see and add information about the preset so as to better follow its evolutions. On the lower section, information about the preset is displayed: Creation date Factory preset Main active input High band filter setting Band separation frequency Stereo link setting Available processing functions and their on/off state.
Page 13 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.4. Undo/Redo
This button can be found to the right of the "Log" button. The middle button opens up the Undo/Redo window. This feature is unique to our processor. With your application, you will be able to undo or redo all changes and therefore go back to your original settings as you try new ones.

In the top section, all changes may be viewed. Click on UNDO, the line will then disappear from the top section and appear in the lower section. The "REDO" will do exactly the opposite. Note that those actions can be done without opening the window, simply using the keyboard shortcuts: Ctrl+Z (Undo) and Ctrl+Shift+Z (Redo). The right and left arrows are also shortcut to undo/redo.

5.5. Compare Work/Ref preset

This button can be found to the right of the "Undo/Redo" button. It will compare the Work preset (the current preset) with a reference preset previously set by the user. Click on the button to switch from one to the other. Warning: when the reference preset is displayed, no changes are possible. Every slider bar is grayed out. The word reference is also displayed next to the On Air preset name. .

To set the reference, click on the small plus on the Work/Ref button, a list of preset is displayed; double-click on the preset you want as a reference. Note: the icon appears in the preset list next to the reference preset.

Page 14 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.6. On Air Preset History

This button can be found to the right of the "Work/Ref" button. It opens up the Preset history window. This is another major innovation. Here, the user may know at any time where the preset comes from, i.e. which factory or user preset is being used. Better yet, each time the preset is modified, the previous version is kept in the history, and may be reused days or months later.

In the "On Air Preset History" window, every preset that has been used has been saved. Double-click on one, and it will become the current preset.

Page 15 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.7. Preset management

This buttons can be found to the right of the Histo button. They correspond to the following commands: Save the On Air preset Save As the On Air preset with a new name Load a user preset New, create a new preset based on a Factory preset 5.7.1. Save As

Click on this section to enter the new name for the preset.

Page 16 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.7.2.

Preset

Load an On Air preset with this command: double-click on the preset you wish to select. Three icons indicate the following information: User preset icon This icon shows the current On Air preset This icon shows which preset is set as a reference (see section 4.6).

On the top right, four buttons correspond to the following commands: Rename a preset Delete a preset Import a preset from your computer to the processor. Export a preset from the processors internal memory to your hard drive. Security allows you to manage preset security, see section 5.7.4. "Save", "Save as and "New" commands are also available here.

Page 17 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.7.3.

New

Click on this section to enter the name for the new preset.

To create a new User preset based on a Factory preset, select a preset, rename it if necessary and click on OK. The new preset is now On Air, and can be found in a list of User presets that can be accessed with the PRESET button.

Page 18 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.7.4.

Security

Presets may be password protected. Set allows you to set the password. Lock / Unlock to enable/disable the protection. The password is required to do so. Clear to delete the password. The password is required to do so. On the right of each preset alock symbol gives the protection status: : no protection. : a password has been set, protection is disabled. : a password has been set, protection is enabled.

In the Preset auto lock section you can automatically lock the protected presets after a user-set delay of inactivity.

Page 19 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

When a protected ted preset is on air, the workspace is locked and parameters are not visible.

To temporarily disable the protection, click the lock next to name of the preset and enter the password. Once the preset is unlocked it will automatically lock again after a delay of inactivity (see previous page Preset auto lock).

Page 20 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8. Setup

This button can be found to the right of the preset buttons. You may then access: Settings for: General parameters Users Preset Settings Input : Analog & Digital Output : Analog & Digital Stereo Generator & MPX Output MPX Power Control Advanced set up for: Upgrades and License management Backup and Restore Test Generator Calibration

To go back to the Setup main menu page, use the 5.8.1. General

button. Set a name for your processor. Click on the name to change it. The display functions make it possible to: Set the refresh rate for the vumeters in number of times per second. Only increase this value is your connection allows it. In case of low bandwidth, decrease the value. Display all sub groups in a window at the same time. Set the height for the slider bars, and space between slider bars in the sound work space.

The Application auto exit function disconnects the user after a delay of inactivity. The Preset security function automatically locks protected presets, see section 5.7.4. The Process autolock automatically locks the user interface after a delay of inactivity so as to avoid unintentional changes. A simple dialog box gives the user the option to unlock.
Page 21 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.2.

Users

User management can be done intuitively, but the security process is very complex so as to satisfy every users and broadcasters needs. What follow is an explanation on how the security works with the sound processing software

5.8.2.1 Security overview Three security levels are available: Super Admin User Admin and User Broadcaster Admin and Broadcaster

5.8.2.2 The Super Admin account As you may have guessed, with this account, you can do everything. If there is only one user for the system, use this account and forget about the other ones. IMPORTANT > When first installing the unit, use default login and password: login : Admin (cannot be modified, it is THE Super Admin login) Password : admin (can be modified)

With a Super Admin account, you can: Have simple access (remote control to set the processor) Create User Admin and Broadcaster Admin accounts Delete User Admin and Broadcaster Admin accounts

Page 22 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

With a Super Admin account, you cannot: Set the processor if a Broadcaster Admin account exists. If you wish to manage access and give users specific rights, you will need to create one User Admin account and several User accounts.

5.8.2.3 The User Admin account It needs to be created by the Super Admin With a User Admin account, you can: Create User accounts Have simple access (remote control to set the processor) With a User Admin account, you cannot: Delete your own account Create a Broadcaster Admin account Access transmission settings (TX level, RDS level) if a Broadcaster Admin account exists. The User Admin account can only be deleted by the Super Admin account.

5.8.2.4 The User account It needs to be created by the User Admin With a User account, you can: Have simple access (remote control to set the processor) With a User account, you cannot: Delete any account Access transmission settings (TX level, RDS level) if a Broadcaster Admin account exists 5.8.2.5 The Broadcaster Admin account The Broadcaster Admin and Broadcaster accounts are specifically for broadcasters who offer Sound4 processors to their clients. It is then the broadcaster who manages the processor. For this type of application, the broadcaster is the only user with rights to the transmission settings (TX level, RDS level), while clients have access to sound processing settings. User Admin and Users will always be able to view transmission settings, but will not be able to modify them. However, Super Admin, Broadcaster Admin and Broadcaster will not even be able to view sound processing settings, only User Admin and Users will be able to.

Page 23 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

It needs to be created by the Super Admin With a Broadcaster Admin account, you can: Create Broadcaster accounts Access transmission settings Import and modify a client preset With a Broadcaster Admin account, you cannot: Delete your own account View sound processing settings (reserved for the client) The Broadcaster Admin account can only be deleted by the Super Admin account.

5.8.2.6 The Broadcaster account It needs to be created by the Broadcaster Admin With a Broadcaster account, you can: Access transmission settings Import and modify a client preset With a Broadcaster account, you cannot: Delete your own account View sound processing settings (reserved for the client)

Page 24 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.3.

Preset Settings

Please note that the following parameters are applicable to the current preset. A High-Pass filter is present at the processor input. With it, it is possible to minimize the following: The rumble, often present in infra-low and on microphone sources without bass frequencies limitations. Loudness loss due to spectrum occupation by infra-low that can only be heard on very large speakers.

The High-pass filter can be set between 1 and 200Hz according to your needs.

With Stereo Link, check level differences between left and right, and restore them at the output. This is particularly interesting for jazz and classical programs, not so much for pop/rock programs, as it may lead to a sound power loss. Band crossover frequency definition (not available in Wide band). In 2-band 470Hz is interesting because it fits most programs. For a warmer sound, it is better to choose a frequency around 200Hz. In 4-band, additional configuration are available.

Delays between input and output; it represents the time required for processing the signal.

The Digiplexer 246 is equipped with 3 inputs: 1 analog input 1 digital (AES/EBU) input 1 PCI input (internal audio backup)

For audio security, one source can be set as main input (main source) and both remaining sources as emergency inputs (1st Backup and 2nd backup). That way, when there is no modulation on the main input, the processor will automatically switch to the other inputs according to the priority settings. For more flexibility, you can set the priority order two different ways: Either the same order should always be used (Default). In that case, click on "Analog & Digital Input" (see next section). Or a different order should be used depending on the audio presets. Click on Default to change to a different value. It will be set for the current preset.

Page 25 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.4.

Analog & Digital Input Levels can be set for each input. For the analog input, 2 input level ranges are available, +12 or +24 dBu, set with jumpers directly on the Sound4 board.

With the Right Trim function, adjust the level of the right channel to compensate potential losses.

With the Backup option, the unit will automatically switch input sources using one of two modes: Backup: In this case, the switch occurs as soon as the Main Source no longer provides modulation. In this mode, both of the other inputs serve as backups for the main one. Priority: The switch occurs as soon as modulation is detected on either the 1st or 2nd backup input.

Threshold: switchover will occur when this detection level is reached. Time to Wake-up: delay before Backup or Priority mode is activated. Time to Fall Asleep: delay before switching back to Main source.

Default input source, as described in the previous section: set input order here. You may also set a fade in/fade out time when switching from one input to another.

Should there be a loss of signal either on the left or the right channel, the remaining signal can be sent on both right and left channel.

Page 26 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.5.

Analog & Digital Outputs

With Analog gain, set the analog output level gain (two level ranges are available: +12 or +24 dBu, set at the factory with jumper directly on the Sound4 board). The Digiplexers analog output can be assigned to one of the following: FM: processed audio for FM. HD: processed audio for formats (HD, DAB, Webstream) digital DMB,

Analog replicate: the analog input source will be replicated on the analog output. Digital replicate: the digital input source will be converted and replicated on the analog output. PCI replicate: the audio source from the PCI driver will be replicated on the analog output. AGC In replicate: regardless of which input is used, the AGC input audio source will be replicated on the analog output. de-

Auto FM De-Emphasis: automatic emphasis when using FM output.

The digital output features are similar to those of the analog output: we have access to Digital Gain , application (FM / HD / Analog replicate..) as well as automatic deemphasis. If AES/EBU is being used, there are 3 additional parameters: Default Sample Rate: default output sampling frequency (32 to 192KHz) AES In Synch: when this mode is selected, output sampling frequency will be identical to processor input frequency. External Synch: with this mode, synchronize the processor with an external AES/EBU clock.

The Dithering function makes it possible to change the resolution at the AES output (between 18 and 24 bits). On the Phone output, set the gain if necessary and set the source and de-emphasis as with the analog output.

Page 27 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.6.

Stereo Generator & MPX Output In General Settings, you will find the basic stereo encoder functions: Stereo mode: to set the encoder in Stereo, Mono, R>L or L>R mode. Pre-Emphasis: to set the preemphasis type (75s, 50s or None). The latter is only applicable for the FM output. Freq for FM Filter: by default, the FM filter frequency is set at 15 kHz; it is possible, however, to go up to 17 kHz so as to improve the high frequency sound. Caution - this manipulation can only apply if no RDS program is broadcast, to ensure the signal is free of disturbance.

Both TX outputs on the Digiplexer 246 carry a multiplex signal by default. With TX Output assignation, the user can set which signal will be present on each BNC (TX1 and TX2). Two choices are available: MPX (normal composite signal) 19kHz (pilot signal for encoders synchronization. external

With Levels, set MPX signal parameters: TX1 and TX2 gain for MPX signal output levels. If a RF block is present in the unit, the level for TX1 must be 12 dBu. Master Level for max low frequency deviation 19Khz level for the pilot deviation in kHz.

Page 28 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.7.

MPX Power Control The unit is equipped with a Limiter and MPX power controller conforming to the ITU-R 412 standard. MPX power regulation is done within the signal processing so as to ensure perfect control and stability, with no audible side effects. Unlike with our competitors products, no regulation is done at the TX output, thus ensuring maximum perception od loudness and power while staying within 75 kHz.

MPX Power Control settings: Mode: ON/OFF to activate the MPX power controller. Max MPX Power (dBr): set the max value for MPX power. Calibration Pwr corr: MPX controller calibration adjustment. Limit users to Max Target : prevent users from setting the max value for the MPX power above the target range, for instance, by a Broadcaster for a user.

MPX controller VU meters: Predictive Power: instant power display. Normal Power: real MPX power display generated by the processor. Integration Time: power measurement integration time display. The standard requires a 60 second sample for the power measurement to be valid. That is why every time the Max MPX Power value is modified, the integration time is reset. It is therefore necessary to wait 60s for the Real MPX Power to be correct. Power Reduction: MPX power regulation display. In the above example, the MPX power controller reduces the power by -1.5 dB so as to conform to the 3 dBr Max set by the user. Note that the measured output value is 2.99 dBr. When using the MPX power regulator, always display the Normal Power and Power reduction VU meters in the VU meters panel (see section 5), so as to view the information at all times. A high Power reduction (>5db max) is meaningless. If it is high, lower it in the FM Lim Drive found in the Final Limiter group. Do not activate the MPX power reduction if no standard requires you to do it, it could have a negative impact on the desired sound level.

Caution:

Page 29 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.8.

Upgrade

To download processor upgrades, and activate licenses.

5.8.9.

Backup / Restore

Use the buttons in the tool bar to: Backup your processor data and save it into a file on your PC or on the network. The format of the file is a proprietary format and can be used to later restore the units configuration or apply the same configuration to a different unit. Restore your data and load a previously saved file. Restore to factory and erase all the changes you may have done.

Page 30 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

5.8.10. Test Generator

The Test Generator is used to calibrate the equipment. Note: if it is ON, it will be activated, and all other processor input audio sources will be deactivated.

5.8.11. Calibrate

The unit has been calibrated in the factory. However, should a field calibration be necessary, carefully follow the directions on the screen.

Page 31 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

6. CONFIGURABLE VU METER PANEL

To answer everybodys needs, a configurable VU meter panel is available. You will be able to set the number of columns and lines, and positon them wherever you wish. See examples below: Example 1:

Example 2:

Example 3:

6.1. Customize the configurable VU meter panel

To customize the VU meter panel, click on an existing VU meter to display the following menu:

Select the unit

Select the VU meter type

Advanced customization tools

User configurations

Default configuration

When Custom1 is selected, panel customization will be memorized under this name. You will then be able to retrieve it by clicking on a VU meter and selecting Custom1. Up to five settings can be saved (Custom1 to 5).

Page 32 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

7. DIAGRAM PANEL

The Diagram panel displays the following information: Input state (if audio is present, backup status) Processing functions diagram Output configuration (HD, FM) In case of overload of one of the inputs or outputs, a red insert indicates the source allowing the user to adjust the target I/O as needed.

Input state, possible state definitions: OK: input receiving audio fault: input no longer receiving audio 1st Back: input set as 1st backup source. 2nd Back: input set as 2nd backup source.

The triangle on the left shows the input that is currently being used (On this example, the digital input, which is also the 1st backup, indicating there is no modulation on the analog input).

Processing functions diagram

Output assignment: As discussed in section 4.7.5, the Digiplexer 246s outputs can be attributed whichever way you wish. In our example, the analog output replicates the analog input signal, the digital output carries an HD signal, the TX1 output carries the MPX signal and the TX2 output carries the 19kHz.pilot signal. Click on the "+" on the right of the slider bar to assign an output as "monitor". You may choose among analog, digital and headset outputs. Once configured, the output level can be set directly with the slider bar. In this section, you can also compare any processor input with the output. For example, simply click on "Input or FM, the matching button becomes orange. Finally, you may also select the FM or HD output mode, and the input (analog, digital or input for the AGC input signal) when clicking on the + on either button

Page 33 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

8. SOUND WORKSPACE

This is the heart of the sound processor. The sound workspace encompasses all the functions that will allow you to customize your sound. It is organized as follows:

8.1. Groups of functions

Each group of function can be expanded to give full access to its features or collapsed to gain space. Click on the button on the right of the bar to expand or collapse the group.

When the function can be bypassed, the button appears on the left side of the bar. When bypass mode is on, the function title is grayed out and the Bypass button blinks.

8.2. Easy or Full mode

We are dealing here with a user-friendly processor. An access level can be set for some of the functions: The Easy mode simplifies the function as much as possible The Full mode, very complete, for as much depth as possible for the function. Functions having both Easy and Full levels are easily recognizable as an or the title bar. The following example shows the 2 Band process function in both modes: Easy mode for 2 Band process: button is in

Full mode for 2 Band process:

Page 34 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9. PROCESSING FUNCTIONS DESCRIPTION

Depending on the version of your processor (1-band, 2-band or 4 band) some processing functions may not be available.

9.1. WIDE BAND AGC

The first processing stage is the Wide Band AGC. It is an automatic gain control that works across a large band of frequencies. Its primary goal is to normalize the differences in audio levels applied at processor input. This AGC has a specifically developed predictive algorithm. It can correct strong sound variations without any pumping effects. Compared to other processors, the ease of control on of the AGC is without equal. 9.1.1. GATE THRES

This threshold will freeze the processors operation when the audio drops below this user-set limit. This function limits floor noise when the signal is too low. When the Gate Threshold is activated, the will light up just above the AGC VU meter. signal is below the set limit, 9.1.2. DRIVE

It will increase or decrease gain at the AGC input. Increasing the drive to the AGC operated gain reduction, thus making up for very low levels. Inversely, very low drive will prevent low level corrections at the processor input. 9.1.3. ATTACK

Adjust, in dB per second, to set the AGC reactivity speed to a volume increase. 9.1.4. RELEASE

Adjust, in dB per second, to set the AGC correction speed. As mentioned before, the AGC is extremely powerful, it is therefore not necessary to use high Release speeds. We recommend using between 1 and 1.5 for classical music and 2 for other programs.

Page 35 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.1.5.

AGC VU meter

It measures attenuation, so it moves from right to left. As with every other VU meter, there are 3 indications: The orange line indicates the Max atten Hold, the max attenuation reached within the last 2 seconds. The blue line indicates dynamically the attenuation. The value on the right of the VU meter indicates the max attenuation reached within the last 2 seconds.

9.2. TONE FX
The Tone FX will color the sound before dynamic processing. In order to do so, there are 2 types of processing functions: A 4 band parametric equalizer. An effect system reinforcing low and high frequencies. Both functions offer completely different results; they are both here so as to satisfy every user. 9.2.1. Tone FX, Easy mode

In Easy mode, the 4 parametric equalizers functions are stripped down as much as possible: the only available adjustment is the gain. For the Bass FX and the Treble FX, only one effect variable is available. 9.2.2. Tone FX, Full mode

In Full mode, all the parameters of the parametric equalizer are available:

Parametric band center frequency Applied filter quality width of the parametric band Gain of the parametric band A spectral display illustrates the general correction applied by the parametric equalizer in real time.

Page 36 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.3. STEREO FX

Your Radio all in one unit is equipped with a real stereo enhancer, 100% mono compatible. Its role is to improve the existing stereo image, it will not however, create stereo from mono sources. In addition to enhancing the stereo image, it can work to control the energy transmitted by the stereo subcarrier at 38 kHz with a stereo image limiter. This unique capability minimizes the problems usually encountered with standard stereo enhancements. The reception stability in environments affected by multiple trajectories (multipath) is therefore optimized. 9.3.1. WIDTH

Set the stereo enhancement rate. Usually, it is sufficient to set it between 20 and 40%. 9.3.2. LIMITER

Set the stereo image reduction percentage compared with a 100% max rate. If using the stereo enhancer, we recommend you use a percentage between 10 and 15%. 9.3.3. The Stereo FX VU meter

The FX VU meter shows the enhancement rate as generated by the processor. It moves from the inside towards the outside. The LIM VU meter shows the limitation percentage on the subcarrier at 38 kHz.

9.4. MULTI BAND PROCESS

The multi Band Process is the heart of the dynamic processing of your Radio all in one unit. A unique algorithm controls the gain in each band so as to render perfect sound stability. The color is controlled by the Fidelity parameter; it is thus possible to have either a pure or a colorful sound texture. The revolutionary S.I.S (Sound Impact System) algorithm will keep the original authenticity of sound attacks (peaks). The multi Band Process is extremely powerful, that is why is it not always necessary to use the AGC stage, as it can absorb important sound variations. 9.4.1. Multi Band Process, Easy mode

Page 37 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.4.2.

Multi Band Process, Full mode

In Full mode, it is possible to have different settings for each band. Bands are always organized in the following fashion: bass at the bottom and higher frequencies on top:
High Band (HI) Bass Band (LO)

It is therefore possible to exercise control separately on each band or proportionally on all bands at once with the "All slider bar:
Set separately Set separately Proportional setting with the All slider bar Proportional setting with the All slider bar Proportional setting with the All slider bar Proportional setting with the All slider bar Proportional setting with the All slider bar

9.4.3.

GATE

This threshold will freeze the operation for each band when the audio drops below this user-set limit. This function limits floor noise when the signal is too low. A blue line in the Input VU meter allows the user to view the set threshold. When the Gate Threshold will light up just above the multi-band VU meter if is activated, the signal is below the set limit, one band at least is frozen. An indicator turns blue for each band in the slider. 9.4.4. DOWN EXP

It only works when the corresponding band is frozen by the Gate function. It then holds the attenuation on the user-set value. It then automatically returns to the configured value according to attack and release time (see section 9.4.10 and 9.4.11). Working with Gate + Down Exp is especially useful in case of noisy sources such as microphones.

Page 38 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.4.5.

FIDELITY

This function controls the spectral balance between bands. For instance, if Fidelity = 0, both bands work independently and the sound is more colorful. If Fidelity = 100, bands are linked to the spectral distribution at the input, and the sound is purer. 9.4.6. S.I.S Sound Impact System

As mentioned above, the Sound Impact System maintains the authenticity of the original sound attacks. A blue LED lights up when it is in action. Note that you need to stay alert when using the S.I.S with high values (greater than 6) because it will increase significantly the average power of the sound. You may then need to lower the Band Limiter or Final limiter drive. 9.4.7. DRIVE

Its goal is to create more or less gain at the input of the band. Increasing the drive leads to a reduction in the gain created by the band process, which can make up for very low levels. Inversely, a very low drive will prevent low level corrections. As mentioned above, the band process power allows for gain control within the bands without the use of the wide band AGC. If you choose this option, we recommend you push the drive to the bands so the reduction is sufficient to correct low levels. 9.4.8. RATIO

With the advanced algorithm of the 2 Band Process you may have a very high ratio without any compressed sound effect: that is how this stage can make up for very large level differences. 9.4.9. Thresh

The Threshold sets working limits for each band. It can also move bands from background to foreground and vice versa.

Page 39 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.4.10. Attack

Adjust in dB per second to set the processors reaction speed for each band. The lower the value, the slower the processor reacts; the higher the value, the faster the processor reacts, thus controlling rapid variations. 9.4.11. Release

Release is often associated with density. Indeed, the higher the release, the higher the spectrum density within the band. Once more, we remind you that the Band processor is very powerful; it is therefore not necessary to set a high release in order to get high density levels.

Page 40 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.4.12. The multi Band Process VU meters

The Input VU meter shows the level at band input, and as always with the application, the peak Hold displays the max value within the last two seconds. The Attenuation VU meter shows the effective reduction on each band.

9.5. MULTI BAND LIMITER

The 2 Band Limiters main goal is to prepare for the final limiter, using a powerful predictive algorithm. It has been stripped down so as not to complicate things with useless parameters. 9.5.1. Multi Band Limiter, Easy mode

9.5.2.

Multi Band Limiter, Full mode

9.5.3.

Drive

As always, its goal is to create more or less gain at the 2 band limiter input. 9.5.4. Thresh

The Threshold sets the limit for each limiter band. 9.5.5. Mix

It is possible here to dose the output level for each band so as to obtain the best sound balance.

Page 41 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

9.5.6.

The multi band Limiter VU meters

As always, you will find VU meters to the left of the parameters. These VU meters show the gain reduction for each band.

9.6. FINAL LIMITER

Today, most FM processors offer a MPX limiter system, sometimes called a composite clipper. This process is often presented as a feature to use gently so as not to risk MPX spectrum deterioration or overmodulation. However as each station tries to outloud all the others, it is frequently used. Yet, the following unwanted effects may occur: 1. Degraded reception in areas affected by multiple signal paths. 2. Pollution of the stereo spectrum (L-R) with harmonics from the mono spectrum (L+R): it amounts to mixing bits of sound information with no relation to one another. 3. Difficulty controlling the maximum noise level - for some sound sources, results will be decent, but it will be mediocre for others. 4. Bury the 19kHz pilot in noise Some processors are equipped with a 19 kHz filter system that is supposed to protect the pilot. But the 3 other issues remain. It is therefore recommended to be vigilant when using an MPX limiter because the designs and spectral pollutions differ greatly from one processor to the next. 9.6.1. HF Limiter Drive

The HF Drive controls the level into the HF limiter so as to increase or decrease the amount of high frequencies to be processed. 9.6.2. HD Limiter Drive

The HD Limiter is specifically conceived for high quality digital applications (HD / DAB / DRM). It is a Look-Ahead type limiter. Its delay can be adjusted. In this mode, outputs are not limited to 15 kHz. Controls the gain at the HD limiter input. 9.6.3. FM LIM DRIVE for the FM Limiter

The FM Limiter is dedicated to FM applications. It is an extremely powerful clipper working at a sampling frequency that has never been reached before: 1.5 MHz! Controls the gain at the FM limiter input. CAUTION: always be aware that increasing the FM limiter drive may lead to significant distortion.

Page 42 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

Remember that the more you load the final limiter, the more you increase the multiplex power. When the MPX power control is activated, you must absolutely monitor its regulation level, or it might attenuate the MPX power level as you increase the limiter drive! 9.6.4. VIRTUAL MPX LIMIT

When designing the "15 kHz Filter / final clipper" section of the Radio all in one, a unique process has been developed to obtain the positive effects of the MPX limiter (loudness) without the bad side effects (uncontrolled noise levels). This complex and unique process acts directly on the audio signal. The advantages of Virtual MPX Limiter are: 100% control of level regardless of the source. No random pollution in the stereo part from the mono part. No overshoot Loudness gain without destruction of the signal Safeguard against multiple path issues Loudness gain on all FM outputs (Analog, Digital and MPX) and not only on the MPX output as is the case with every other processor. Can be used without any compromise 1. 2. 3. 4. 5. 6.

Page 43 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

10. 1-BAND FACTORY PRESETS

In addition to the list below, note that there is also a Bypass preset. Wide band presets list Indicator* Factory Preset Name Information This preset is fully compatible with FMX type Digiplexer. The user will only need to increase or decrease the AGC Wide Band release to match the reactivity speed as set on the old equipment. Setting the final limiter will be the last step to take for the levels to be 100% compatible. Preset to be used with classical programs. For a natural but flattering sound. All-around preset that can fit any purpose requiring wide band processing. This preset uses more the Final Limiter so as to offer a more powerful sound.

WB Original Digiplexer

1 2

WB Classical WB Soft Process WB All Programs WB - Punchy

*Set reactivity or processing power, presets are ordered from 1 to 7 according to their application domain.

Page 44 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

11. 2-BAND FACTORY PRESETS

There are two types of factory presets: WB presets (wide band) 2B presets (two bands) Note that there is also a Bypass preset.

11.1. Wide Band presets

These presets do not use the 2 band processor; therefore, they are based on AGC input and on limitations circuits. Why select a Wide Band preset when a 2 band structure is available? It can be interesting for "purists who do not wish to color their sound. The Wide Band mode can also be used to perform final processing in the chain when used with an in-studio 4 or 6 band Radio all in one. Wide band presets list Indicator* Factory Preset Name Information This preset is fully compatible with FMX type Digiplexer. The user will only need to increase or decrease the AGC Wide Band release to match the reactivity speed as set on the old equipment. Setting the final limiter will be the last step to take for the levels to be 100% compatible. Preset to be used with classical programs. For a natural but flattering sound. All-around preset that can fit any purpose requiring wide band processing.

WB Original Digiplexer

1 2 3

WB Classical WB Soft Process WB All Programs

*Set reactivity or processing power, presets are ordered from 1 to 7 according to their application domain.

Page 45 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

11.2. 2 band presets list

Indicator* 2 3 3 2 3 4 4 5 5 Factory Preset Name 2B natural 2B Soft Process 2B All Programs 2B Jazz Soft 2B Jazz 2B Rock 2B AC Natural 2B AC 2B Hot Information Though it operates in 2 bands, this preset gives a natural sound with a sound spectrum similar to the input source. Perfect balance between low and high spectrum in a soft way. For stations wanting to stay low-key. With a 3 indicator, it has character, without overdoing it. All-around preset. For purist jazz programs, this preset keeps the spectrum balance yet controls peak levels. This preset uses more depth in the 2-band structure. The result will be more colourful and flattering. Powerful preset, perfect for rock / pop rock programs. In between Rock and Hot, this preset is both powerful and natural. Strong sound power that keeps a rock tonality. The 2B Hot brings a warm and colorful sound. The bass will be present and deep, the high part of the signal will be flattering. The most powerful preset, usually for stations looking for significant sound density and a lot of MPX power and bass. It works for Top 40 type stations.

2B Urban

*Set reactivity or processing power, presets are ordered from 1 to 7 according to their application domain.

Page 46 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

12. 4-BAND FACTORY PRESETS

There are two types of factory presets: WB presets (wide band) 4B presets (four bands) Note that there is also a Bypass preset.

12.1. Wide Band presets

These presets do not use the processors 4 bands; therefore, they are based on AGC input and on limitations circuits. Why select a Wide Band preset when a 4 band structure is available? It can be interesting for "purists who do not wish to color their sound. The Wide Band mode can also be used to finalize the chain when used with an in-studio 4 or 6 band Radio all in one. Wide band presets list Indicator* 1 3 Factory Preset Name WB Wide Band Natural WB Wide Band Hot Information Preset with a natural sound For a natural but flattering sound.

*Set reactivity or processing power, presets are ordered from 1 to 7 according to their application domain.

Page 47 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com

Digiplexer Sound Process, user manual 12/2009

12.2. 4 band presets list

Indicator* 1 1 1 2 3 4 2 3 3 4 4 4 5 5 5 6 Factory Preset Name 4B Classical Soft 4B Classical Mid 4B Classical Processed 4B Natural 4B Natural Hot 4B Natural Loud 4B Jazz Soft 4B Jazz Hot 4B All Programs 4B All Programs Hot 4B Country 4B Rock 4B Rock Hot 4B - AC Soft 4B AC 4B CHR Information Even though it uses the 4-band structure, this preset keeps the initial spectrum repartition Slightly more boosted than the Classical Soft preset For classical stations wanting to color and level broadcast music while keeping the spirit of a classical program. Though it operates in 4 bands, this preset gives a natural sound with a sound spectrum similar to the input source. Slightly more colorful than the Natural. This preset will give a powerful sound without modifying the initial source mix. For purist jazz programs, this preset keeps the spectrum balance yet controls peak levels. This preset uses more depth in the 4-band structure. The result will be more colourful and flattering. With a 3 indicator, it has character, without overdoing it. All-around preset. Slightly more colorful than the All Programs preset. Especially suited for country music, this preset offers a deep sound. Powerful preset, perfect for rock / pop rock programs. More colorful than the Rock preset. Strong sound power that keeps a rock tonality. This preset works with many commercial formats. More compressed version of the 4B AC Soft preset, it bring strong multiplex power. Very powerful preset for commercial stations, related to the Urban preset but more present in the medium-high and high signal The most powerful preset, usually for stations looking for significant sound density and a lot of MPX power and bass. It works for Top 40 type stations.

4B Urban

*Set reactivity or processing power, presets are ordered from 1 to 7 according to their application domain.

Page 48 Head Office : Parc dactivites Kennedy - 20, avenue Neil Armstrong F-33700 Bordeaux-Merignac (France) Tel +33 (0)5 57 928 928 Fax +33 (0)5 57 928 929 [email protected] www.audemat.com