Reguladores de Pressao para Gases Especiais Rotarex

PRESSURE REGULATORS
table of contents
product range overview technology overview -- Single Stage -- Dual Stage -- Balanced-Valve How to choose A pressure regulator -- Technical Parameters -- Body Materials -- Seat Materials -- Inlet & Outlet Pressures -- Cylinder Connections -- Gauges -- Safety Relief Valves -- Other product options -- Cleaning Products -- High Pressure Single Stage Regulators -- High Pressure Dual Stage Regulators -- Low Pressure Regulators -- Point of Use Regulators -- Regulators for Acetylene Applications -- Flow Regulators -- Constant Flow Regulators -- Back Pressure Regulators -- Accessories - Line Valves -- Accessories - Metering Valves -- Accessories - Pressure Gauges -- Accessories - Cylinder Connectors -- Accessories - Safety Relief Valves -- Accessories - Gas Cylinder Holder REFERENCE CHARTs -- Gas compatibility table -- Conversion tables
P. 004 P. 008 P. 008 P. 010 P. 012 P. 013 P. 013 P. 014 P. 014 P. 014 P. 014 P. 015 P. 015 P. 015 P. 015 P. 016 P. 016 P. 034 P. 044 P. 056 P. 066 P. 070 P. 073 P. 076 P. 077 P. 083 P. 084 P. 090 P. 092 P. 095 P. 096 P. 096 P. 097
All Rotarex regulators are produced in Europe in accordance with international standards (ISO; CGA....) and are guaranteed to provide safe and reliable performance in operation. All locations are ISO 9001.
Product Range Overview
SINGLE STAGE HIGH PRESSURE REGULATORs
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material
SerieS S 215 P. 016 Diaphragm 200/300 bar 2900/4350 psi 1/3/8/16/35/50 bar 14.5/44/116/232/508/725 psi
0,5/1,6/13,6/15/20 Chrome plated brass Stainless steel
SerieS S 220
Diaphragm 200 bar 2900 psi 3/15/25/50 bar 44/218/360/725 psi 5/25/50/50 Stainless steel
P. 018
SerieS S 225
Diaphragm 200 bar 2900 psi 3/8/16/35/50 bar 44/116/232/508/725 psi 2/10/14/25/25 Chrome plated brass Stainless steel
P. 020
SerieS S 250
Piston 300 bar 4350 psi 60 bar 870 psi 10 Chrome plated brass Stainless steel
P. 022
SerieS S 400
Piston 300 bar 4350 psi 200 bar 2900 psi 30 Chrome plated brass Stainless steel
P. 024
SerieS S 800
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Diaphragm + Balanced-Valve 300 bar 4350 psi 10/16/25/50 bar 145/232/363/725 psi 50/50/50/100 Raw brass Chrome plated brass Stainless steel
P. 026
SerieS S 810
Diaphragm + Balanced-Valve 300 bar 4350 psi 10/16/25 bar 145/232/362.5 psi 50/50/50 Raw brass
P. 028
SerieS GD 100
Diaphragm 200 bar 2900 psi 10 bar 145 psi 100 Raw brass
P. 030
SerieS TGD 250

Diaphragm 200 bar 2900 psi 20 bar 290 psi 250 Raw brass
P. 032
DUAL STAGE HIGH PRESSURE REGULATORs
SerieS D 215
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Diaphragm/Diaphragm 200/300 bar 2900/4350 psi 1/3/8/16 bar 14.5/44/116/232 psi 0,4/1,2/2,9/3,5 Chrome plated brass Stainless steel
P. 034
SerieS D 230
Piston/Bellow 200 bar 2900 psi 1/3/10 bar 14.5/44/145 psi 2/2,5/3,5 Chrome plated brass Stainless steel
P. 036
SerieS D 230-0.1
Piston/Diaphragm 200 bar 2900 psi 0,01-0,1 bar 0.14-1.4 psi 0,5 Chrome plated brass Stainless steel
P. 038
SerieS D 235
Diaphragm/Bellow 300 bar 4350 psi 1/3/10 bar 14.5/44/145 psi 1/2/5,5 Chrome plated brass Stainless steel
P. 040
SerieS D 235-0.1
Diaphragm/Diaphragm 300 bar 4350 psi 0,01-0,1 bar 0.14-1.4 psi 0,5 Chrome plated brass
P. 042
ALL RIGHTS OF CHANGE RESERVED
LOW PRESSURE REGULATORs
SerieS S 10
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Diaphragm + Balanced-Valve 25 bar 362.5 psi 3/8 bar 44/116 psi 4,5/12 Chrome plated brass Stainless steel
P. 044
SerieS S 15
Diaphragm + Balanced-Valve 25 bar 362.5 psi 10 bar 145 psi 50 Chrome plated brass Stainless steel
P. 046
SerieS S 20
Bellow 50 bar 725 psi 1/3/10 bar 14.5/44/145 psi 2/2,5/3,5 Chrome plated brass Stainless steel
P. 048
SerieS S 20-0.1
Diaphragm 50 bar 725 psi 0,01-0,1 bar 0.14-1.4 psi 0,5 Chrome plated brass Stainless steel
P. 050
SerieS S 55
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Diaphragm 50 bar 725 psi 3/8/10/16/35 bar 44/116/145/323/508 psi 2,5/3/3,5/5,5/10 Chrome plated brass Stainless steel
P. 052
SERIES DC 50
Diaphragm + Balanced-Valve 50 bar 725 psi 8/15/40 bar 116/217/580 psi 150/300/300 Raw brass Chrome plated brass
P. 054
POINT OF USE REGULATORs
SerieS S 21
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Bellow 50 bar 725 psi 1/3/10 bar 14.5/44/116 psi 2/2,5/3,5 Chrome plated brass Stainless steel
P. 056
LABLINE 22
Bellow 50 bar 725 psi 1/3/10 bar 14.5/44/116 psi 2/2,5/3,5 Chrome plated brass Stainless steel
P. 058
Mono SerieS S 15
P. 060
Mono SerieS S 20
Bellow 50 bar 725 psi 1/3/10 bar 14.5/44/145 psi 2/2,5/3,5 Aluminum Stainless steel
P. 062
Mono SerieS S 40
Bellow 50 bar 725 psi 1/3/10 bar 14.5/44/145 psi 2/2,5/3,5 Aluminum Stainless steel
P. 064
Diaphragm + Balanced-Valve 25 bar 362.5 psi 10 bar 145 psi 50 Aluminum Stainless steel
ACETYLENE APPLICATION REGULATORs
SerieS S 20 AD
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (C2H2) Material Bellow 20 bar 290 psi 1,5 bar 21.75 psi 1 Chrome plated brass
P. 066
SerieS S 25 AD
Bellow 20 bar 290 psi 1,5 bar 21.75 psi 1 Chrome plated brass
P. 068
SerieS S 21 AD
P. 056
SerieS LABLINE 22 AD P. 058

Mono SerieS S 20 AD
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (C2H2) Material Bellow 50 bar 725 psi 1,5 bar 21.75 psi 1 Aluminum
P. 062
Mono SerieS S 40 AD
Bellow 20 bar 290 psi 1,5 bar 21.75 psi 1 Aluminum
P. 064
SerieS DC 50 AD
Diaphragm + Balanced-Valve 20 bar 290 psi 0,8 bar 12 psi 10 Raw brass Chrome plated brass
P. 054
SerieS GD 100 AD
Diaphragm 25 bar 362.5 psi 1,2 bar 17.4 psi 10 Raw brass Chrome plated brass
P. 030
FLOW REGULATORs
SerieS S 20 FM
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Bellow 50 bar 725 psi 3,5 bar 50 psi 5 or 15 lpm Chrome plated brass
P. 070
SerieS S 225 FM

Diaphragm 200 bar 2900 psi 3,5 bar 50 psi 5 or 15 lpm Chrome plated brass
P. 071
SerieS D 230 FM

Piston/Bellow 200 bar 2900 psi 3,5 bar 50 psi 5 or 15 lpm Chrome plated brass
P. 072
CONSTANT FLOW REGULATORs
BACK PRESSURE REGULATORs
SerieS S 70
Technology Inlet Pressure Outlet Pressure Flow Rate Nm3/h (N2) Material Piston 200 bar 2900 psi 4,13/2,06 bar 30/60 psi 0,25-7 lpm Nickel plated brass Stainless steel
P. 073
SerieS S 75
Piston 200 bar 2900 psi 3,5/6 bar 50/87 psi 0,3-15 lpm Nickel plated brass Stainless steel
P. 074 Technology Inlet Pressure Pressure Set Flow Rate Nm3/h (N2) Material
DEI 10
Diaphragm 1 - 15 bar 14.5 - 217.5 psi 7/15 bar 101.5/217.5 psi 26/80 Stainless steel
P. 076
VALVEs
series VP 300
Pressure CV Material Type Handwheel 300 bar 0.30 Raw brass Chrome plated brass O-Ring Multi-turn
P. 077
series VM 200
200 bar 0.12 Chrome plated brass Stainless steel Diaphragm 1/4 turn/Multi-turn
P. 078
series VM 50
50 bar or 200 bar 0.12 Chrome plated brass Stainless steel Diaphragm 1/4 turn/Multi-turn
P. 079
series VM 20
50 bar 0.14 Chrome plated brass Stainless steel Diaphragm 1/4 turn/Multi-turn
P. 080
series VM 45
Pressure CV Material Type Handwheel 45 bar 0.58 Chrome plated brass Stainless steel Diaphragm 1/4 turn/Multi-turn
P. 082
series RD 10
60 bar 0.116 Chrome plated brass Stainless steel Needle valve Multi-turn
P. 083
accessories
Pressure Gauges
P. 084
Cylinder Connectors
P. 090
SV 10 safety relief valve
P. 092
gas cylinder Holder
P. 095
introduction
Technology overview
Rotarex uses 4 main technologies to achieve a stable and reliable pressure regulation: DIAPHRAGM -- Our most-used technology (cylinder regulation, line, supply panel) -- Compact design -- Good precision BELLOW -- High precision of outlet pressure -- Less sensitive to the pressure increase at the outlet -- Mainly used for applications like chromatography PISTON -- Stable outlet flow -- Used for regulator where the pressure outlet is close to the inlet pressure -- Used as the 1st stage for a dual stage regulator -- Used for calibration regulator Balanced-Valve -- Best-in-class pressure stability -- Minimizes the effect of inlet pressure fluctuations on outlet pressure -- Increases regulator lifetime and reduces cost of ownership by reducing seat effort -- Diaphragm technology only
single stage regulator A single stage regulator will reduce the inlet pressure to the outlet pressure in one step. By turning the hand wheel we can adjust the outlet pressure. Due to the design of single stage regulators, the outlet pressure increases as cylinder pressure decreases. The outlet pressure can be readjusted by the hand wheel. Because of this small pressure rise, single stage regulators are recommended for applications that do not require a constant outlet pressure. Single stage regulators are also recommended for liquefied gas service such as CO2, Propane, LPG, cryogenic gases and other gases that are liquid in the cylinder.
Diaphragm Regulator
Ergonomic hand wheel for pressure adjustment Spring applies force on diaphragm
Poppet
Diaphragm
PRODUCT FINDER
Rotarex diaphragm regulators
Inlet (P1)
Outlet (P2)
Series S 215 Series S 220 Series S 225 Series GD 100 Series TGD 250 Series S 20-0.1 Series S 55 Series S 225 FM
P. 016 P. 018 P. 020 P. 030 P. 032 P. 050 P. 052 P. 071
introduction
technology overview (continued)

Bellow Regulator
Ergonomic hand wheel for pressure adjustment
Spring applies force on bellow
PRODUCT FINDER
Rotarex bellow regulators
Poppet Bellow
Inlet (P1)
Outlet (P2)
Series S 20 Series S 21 Labline 22 Mono Series S 20 Mono Series S 40 Series S 20 AD Series S 21 AD Series S 25 AD Labline 22 AD Series S 20 FM
P. 048 P. 056 P. 058 P. 062 P. 064 P. 066 P. 056 P. 068 P. 058 P. 070
Inlet (P1) PISTON Regulator
Spring applies force on piston
Piston
PRODUCT FINDER
Inlet (P1) Outlet (P2)
Rotarex piston regulators
Series S 250 Series S 400
P. 022 P. 024
10
introduction

dual stage regulators A dual stage regulator is basically two single stage regulators in a single body. This dual configuration provides superior pressure and flow stability vs. single stage regulators. The first stage is preset to an intermediate pressure. This intermediate pressure acts as the inlet pressure to the second stage, which is adjustable. Because the pressure has been reduced to the intermediate pressure by the first stage, the pressure feeding the second stage of the regulator remains constant, thereby insuring a constant outlet pressure to the application regardless of cylinder pressure. This technology avoids having to frequently adjust the outlet pressure as the cylinder pressure drops. Applications would be laboratory, gas chromatography but also in the industry for precision welding.
Diaphragm/Diaphragm Regulator Ergonomic hand wheel for pressure adjustment
2nd Stage Regulator ( diaphragm)
Inlet (P1)
Outlet (P2)
1st Stage Regulator preset (diaphragm)
PRODUCT FINDER
Rotarex diaphragm /diaphragm regulators
Series D 215 Series D 235-0.1
P. 034 P. 042
Comparison of dual stage vs. Single stage Regulator

Single stage
P2
Dual stage
P1
introduction
11

Diaphragm/BELLOW Regulator Ergonomic hand wheel for pressure adjustment
2nd Stage Regulator Bellow
Inlet (P1)
Outlet (P2)
1st Stage Regulator preset Diaphragm
PRODUCT FINDER
Rotarex diaphragm /bellow regulators
Series D 235
P. 040
PISTON/BELLOW Regulator
2nd Stage Regulator Bellow
Outlet safety relief valve
Outlet (P2)
1st Stage Regulator preset Piston
PRODUCT FINDER
Rotarex piston /bellow regulators
Series D 230
P. 036
Inlet (P1)
12
introduction

Balanced-Valve technology Balanced-Valve (BV-technology) regulator gives best-of-class pressure stability due to its proprietary design of components in the high pressure zone. It is able to balance the internal forces within the regulator and virtually eliminate the effects of decreasing inlet pressure on the outlet pressure. This means that the regulator balances and compensates for any pressure fluctuation on the inlet and provides a constant outlet pressure like a dual stage regulator. Balanced-Valve technology This regulator type also functions as a LINE REGULATOR for a 2nd regulation and can equip our switch over boards. Switch over boards equipped with this technology dont need any line regulator afterwards and can be connected directly to the application.
BV Technology
Spring applies force on diaphragm
PRODUCT FINDER
Rotarex balanced-valve regulators
Inlet (P1)
Outlet (P2)
Series S 800 Series S 810 Series S 10 Series S 15 Series DC 50
P. 026 P. 028 P. 044 P. 046 P. 054
Comparison of Balanced-Valve technology vs. dual and Single stage Regulators
Single stage
P2
Balanced-Valve and Dual stage
P1
introduction
13
SELECTING the right regulAtor

To choose the right regulator for your application, and to get the best results, you should identify the following technical parameters:
TECHNICAL PARAMETER
Gas Purity Nominal inlet pressure Nominal outlet pressure Nominal flow (N2) Single stage or dual stage ? Product Material Inlet connection Outlet connection Gauges Safety device Vacuum Application Outdoor or indoor use Temperature range Atex use Preset outlet pressure Marking
examples
Inert, flammable, oxidizing, corrosive, toxic UHP, HP, industrial, medical, diving bar or psi bar or psi Nm3/h or Nlpm Dual stage or BV Technology are needed where pressure stability is essential Regulator, point of use, supply board, switch over board Brass, chrome plated brass, stainless steel Country of use, standard, connection G 3/8, 1/4 NPT, male, female Low pressure, high pressure Yes / no Yes / no Food, electronic, medical, welding, industrial, diving Environment -20C to + 60C / -4F to + 140F Yes / no If yes, which pressure ? CE, TPED, PI
Each product page is designed to provide you the essential technical information at a glance:
16
SiNGLe STAGe HiGH-PreSSUre reGULATOrS

SPecificATiONS
female ports 16 x 1.336 (inlet) - G 3/8 (outlet)*
17
SerieS S 215 | SiNGLe STAGe HP reGULATOr

- Diaphragm single stage - Purity up to 6.0 - Inlet pressure: 200 bar (2900 psi) or 300 bar (4350 psi) - Outlet pressure: 1/3/8/16/35/50 bar 14.5/45/116/232/508/725 psi
Compact and
APPLicATiONS - Designed for cylinder regulator applications - Ideally suited for pure, inert and mildly corrosive gas applications such as analytical instrumentation - Also used to create a controlled atmosphere in laboratories - The Series 215 L is developed for liquid gas applications
GeNerAL - Compact, ergonomic and lightweight design makes this regulator suitable for many applications. - Accurate pressure control for reliable service.
Seat seal PCTFE
or 1/4 NPT (inlet/outlet)
Weight 1,5 kg
3.3 lbs
inlet pressure 200 bar / 300 bar
2900 psi / 4350 psi 14.5/45/116/232/508/725 psi Nm3/h (N2)
Leak rate 10-8 mbar /s He Temperature range - 20C to + 60C
Outlet pressure 1/3/8/16/35/50 bar
O-ring EPDM - Standard
NBR FPM
- 4F to + 140F
Nominal flow 0,5/1,6/6/13,6/15/20 Oxygen use OK for brass and stainless steel
diaphragm AISI 304 (3/8/16 version)
Hastelloy (35/50 version)
Gauges High and low pressure
(M10 x 1 or 1/4 NPT)
except 35 bar and 50 bar outlet pressure versions
1 inlet / 1 outlet Rear thread for front
lightweight design
fLOW cUrVeS
PreSSUre bar
4.0 3.5
*Only available in 300 bar
OUTLeT PreSSUre- bar and psi
3.0 2.5 2.0 1.5 1.0 0.5 0.0
21.75
panel mounting O2 applications compatible up to 16 bar (232 psi) Inlet/outlet gauge

Special requirements on request
fLOW cUrVe S 215-3 reGULATOr SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
PreSSUre psi
29
PreSSUre bar
10 9 8 7 6 5 4 3 2 1
fLOW cUrVe S 215-8 reGULATOr SET: 8 bar / 116 psi 4 bar / 58 psi 2 bar / 29 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
PreSSUre psi
145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
14.5
7.25
(83)
(166)
10
(250)
15
(333)
20
(416)
25
(500)
30
(83)
(166)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
(666)
40
(750)
45
(833)
50
fLOW rATe - Nm /h (Nlpm) in Nitrogen (N )
PreSSUre bar
20 18
PreSSUre psi
290 261
PreSSUre bar
45 40
fLOW cUrVe S 215-35 reGULATOr SET : 35 bar / 507.5 psi 17,5 bar / 253.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
PreSSUre psi
652.5 580 507.5 435 362.5 290 217.5 145 72.5 0
14 12 10 8 6 4 2 0
203 174 145 116 87 58 29 0
16
232
35 30 25 20 15 10 5 0
(83)
(166)
10
(250) (333) (417)
15
20
25
(500)
30
(583) (666) (750)
35
40
45
(833)
50
(916) (1000) (1083) (1166) (1250) (1333)
55
60
65
70
75
80
(417)
25
(833)
50
(1250)
75
(1666)
100
(2883)
125
(2500)
150
PrOdUcT cONfiGUrATOr
Body Material inlet Pressure Outlet Pressure Ports end connections O-ring Material Gauges Ports configuration
L
Chrome plated brass Stainless steel
L i
215
200
200 bar 2900 psi 300 bar 4350 psi
200 1 bar
16
14.5 psi 300 3 bar 44 psi 8 bar 116 psi 16 bar 232 psi 35 bar 508 psi 50 bar 725 psi
1 3 8 16 35 50
5
5 ports 6 ports
5 6
ePdM
With
1
Without
0 1
A
Standard Reverse Inlet/outlet
A r
16 x 1.336 - G 3/8 16 EPDM Standard 1/4 NPT - 1/4 NPT N NBR FPM
14
introduction
SELECTING the right regulAtor (continued)

body materials Most Rotarex pressure regulators are available in stainless steel 316L or chrome plated brass, and on some models, raw brass or aluminum. Which material is best for your installation? Stainless steel 316L: The recommended option for corrosive gases and high to ultra high purity applications due to its superior resistence, nonreactivity, exceptional durability and high-surface finish properties. It is compatible with most gas types and low-velocity oxygen applications. Rotarex uses Stainless steel type 316L, an austentic chromium nickel stainless steel containing Molybdenum. It offers: -- Exceptional corrosion resistance - particularly against sulfuric, hydrochloric; acetic, formic and tartaric acids, acid sulfates and alkaline chlorides; -- resistance to pitting from chloride-ion solutions; and -- outstanding strength even at elevated temperatures Chrome plated or Raw brass: The most commonly used material for industrial and high velocity oxygen applications due to its cost effectiveness versus stainless steel, good strength, resistence and low-friction flow properties. Need more information? You can find more detail about optional materials on our website: www.rotarex.com. Additionally, one of our material engineers would be happy to discuss the pros and cons of each option to help you choose the best solution.
as Compatibility: make sure the G body material is compatible with the gas type you will be using. Consult the gas compatibility reference chart on page 96.
o-ring materials For many regulators, a choice of O-ring seal materials is available: EPDM: NBR: FPM: Ethylene Propylene Rubber Nitrile Butadiene Rubber Fluorocarbon Rubber (VITON) Gas Compatibility: make sure the O-ring material is compatible with the gas type you will be using. Consult the gas compatibility reference chart on page 96.
Inlet / outlet pressure Different models are designed for different inlet and outlet pressure performance. The available options are clearly indicated on each product page. Please specify required inlet and outlet pressures when ordering. We can also accommodate special requests. cylinder connectors Specific cylinder valve connections are required for each gas type. The standard available connections are NPT 1/4 male and 16 x 1.336 male which represent the most common connection types. Other standards and dimensions are available on request.
introduction
15
SELECTING the right regulAtor (continued)

Gauges Most Rotarex regulators are equipped with pressure gauges. However, you can specify with or without gauges when ordering. Check the product configurator table on each product page. Safety relief valve Safety relief valves are standard on most Rotarex regulators as a best practice. Other product options Some product solutions have additional options specific to its unique application, such as mounting options, flow scale, valve type, etc. These options are clearly indicated on the product configuration table on each product page.
16

SPecificATiONS
female ports 16 x 1.336 (inlet) - G 3/8 (outlet)*
17
SerieS S 215 | SiNGLe STAGe HP reGULATOr

- Diaphragm single stage - Purity up to 6.0 - Inlet pressure: 200 bar (2900 psi) or 300 bar (4350 psi) - Outlet pressure: 1/3/8/16/35/50 bar 14.5/45/116/232/508/725 psi
Compact and
APPLicATiONS - Designed for cylinder regulator applications - Ideally suited for pure, inert and mildly corrosive gas applications such as analytical instrumentation - Also used to create a controlled atmosphere in laboratories - The Series 215 L is developed for liquid gas applications
GeNerAL - Compact, ergonomic and lightweight design makes this regulator suitable for many applications. - Accurate pressure control for reliable service.
Seat seal PCTFE
or 1/4 NPT (inlet/outlet)
Weight 1,5 kg
3.3 lbs
inlet pressure 200 bar / 300 bar
2900 psi / 4350 psi 14.5/45/116/232/508/725 psi Nm3/h (N2)
NBR FPM diaphragm AISI 304 (3/8/16 version) Hastelloy (35/50 version)
- 4F to + 140F
Nominal flow 0,5/1,6/6/13,6/15/20 Oxygen use OK for brass and stainless steel
(M10 x 1 or 1/4 NPT)
3.0 2.5 2.0 1.5 1.0 0.5 0.0
21.75
lightweight design 1 inlet / 1 outlet Rear thread for front panel mounting O2 applications compatible up to 16 bar (232 psi) Inlet/outlet gauge
fLOW cUrVeS
PreSSUre bar
4.0 3.5
fLOW cUrVe S 215-3 reGULATOr SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
PreSSUre psi
29
PreSSUre bar
10 9 8 7 6 5 4 3 2 1
PreSSUre psi
145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
14.5
7.25
(83)
(166)
10
(250)
15
(333)
20
(416)
25
(500)
30
(83)
(166)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
(666)
40
(750)
45
(833)
50
fLOW rATe - Nm3/h (Nlpm) in Nitrogen (N2)
PreSSUre bar
20 18
PreSSUre psi
290 261
PreSSUre bar
45 40
fLOW cUrVe S 215-35 reGULATOr SET : 35 bar / 507.5 psi 17,5 bar / 253.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
PreSSUre psi
652.5 580 507.5 435 362.5 290 217.5 145 72.5 0
14 12 10 8 6 4 2 0
203 174 145 116 87 58 29 0
16
232
35 30 25 20 15 10 5 0
(83)
(166)
10
(250) (333) (417)
15
20
25
(500)
30
(583) (666) (750)
35
40
45
(833)
50
(916) (1000) (1083) (1166) (1250) (1333)
55
60
65
70
75
80
(417)
25
(833)
50
(1250)
75
(1666)
100
(2883)
125
(2500)
150
PrOdUcT cONfiGUrATOr
Body Material inlet Pressure Outlet Pressure Ports end connections O-ring Material Gauges Ports configuration
L
L i
215
200
200 bar 2900 psi 300 bar 4350 psi
200 1 bar 300 3 bar
16
14.5 psi 44 psi 8 bar 116 psi 16 bar 232 psi 35 bar 508 psi 50 bar 725 psi
1 3 8 16 35 50
5
5 ports 6 ports
5 6
ePdM
With
1
Without
0 1
A
A r
Cleaning All products, regardless of gas application, are cleaned to remove all traces of residue and grease using the same procedures as for O2 use. There is no need to specify special cleaning when ordering.
16
Single stage high-pressure regulators
Series S 215 | SINGLE STAGE HP REGULATOR

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) or 300 bar (4350 psi) -- Outlet pressure: 1/3/8/16/35/50 bar 14.5/45/116/232/508/725 psi
Compact and
Applications -- Designed for cylinder regulator applications -- Ideally suited for pure, inert and mildly corrosive gas applications such as analytical instrumentation -- Also used to create a controlled atmosphere in laboratories -- The Series 215 L is developed for liquid gas applications
Key features -- Compact, ergonomic and lightweight design makes this regulator suitable for many applications. -- Accurate pressure control for reliable service.
1 inlet / 1 outlet Rear thread for front O2 applications compatible Inlet/outlet gauge
lightweight design panel mounting
up to 16 bar (232 psi)

Specifications
Female ports 16 x 1.336 (inlet) - G 3/8 (outlet)*
17
or 1/4 NPT (inlet/outlet) Seat seal PCTFE

Weight 0,9 kg
2.0 lbs
Inlet pressure 200 bar / 300 bar
2900 psi / 4350 psi 14.5/45/116/232/508/725 psi Nm3/h (N2)
NBR FPM Diaphragm AISI 304 (3/8/16 version) Hastelloy (35/50 version)
- 4F to + 140F
Nominal Flow 0,5/1,6/6/13,6/15/20 Oxygen use OK for brass and stainless steel
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
4.0 3.5
FLOW CURVE S 215-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
29
pressure bar
10 9
FLOW CURVE S 215-8 REGULATOR SET: 8 bar / 116 psi 4 bar / 58 psi 2 bar / 29 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
outlet pressure- bar and psi
3.0 2.5 2.0 1.5 1.0 0.5 0.0
21.75
8 7 6 5 4 3 2 1
14.5
7.25
(83)
(166)
10
(250)
15
(333)
20
(416)
25
(500)
30
(83)
(166)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
(666)
40
(750)
45
(833)
50
Flow rate - Nm3/h (Nlpm) in Nitrogen (N2)
pressure bar
20 18
FLOW CURVE S 215-16 REGULATOR SET: 1 6 bar / 232 psi 8 bar / 116 psi 4 bar / 58 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
290 261
pressure bar
45 40
FLOW CURVE S 215-35 REGULATOR SET : 35 bar / 507.5 psi 17,5 bar / 253.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
652.5 580 507.5 435 362.5 290 217.5 145 72.5 0
14 12 10 8 6 4 2 0
203 174 145 116 87 58 29 0
16
232
35 30 25 20 15 10 5 0
(83)
(166)
10
(250) (333) (417)
15
20
25
(500)
30
(583) (666) (750)
35
40
45
(833)
50
(916) (1000) (1083) (1166) (1250) (1333)
55
60
65
70
75
80
(417)
25
(833)
50
(1250)
75
(1666)
100
(2883)
125
(2500)
150
Product Configurator
Body Material Inlet Pressure Outlet Pressure Ports End Connections O-ring Material Gauges Ports Configuration
L
L I
215
200
200 bar 2900 psi 300 bar 4350 psi
200 1 bar
16
14.5 psi 300 3 bar 44 psi 8 bar 116 psi 16 bar 232 psi 35 bar 508 psi 50 bar 725 psi
1 3 8 16 35 50
5
5 ports 6 ports
5 6
EPDM
With
1
Without
0 1
A
A R
18
SERIES S 220 | SINGLE STAGE HP REGULATOR

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 3/15/25/50 bar 44/218/360/725 psi
1 Inlet / 1 outlet Rear thread for O2 application compatible
Applications -- Designed for cylinder regulator applications. -- Ideally suited for corrosive gases in ultra high purity applications and for fundamental research laboratories. -- Suitable for corrosive liquid gases.
Key features -- No contamination risk due to its threadless and springless design. -- Low dead volume, which guarantees a good purge of the regulator. -- Ergonomic handwheel for exceptional control. -- Panel mounting possible due the rear threads. -- Can also be equipped with a shut off or needle valve at the outlet.
panel mounting
(with inlet pressure max 30 bar) Inlet/outlet pressure gauges


Specifications
Female ports 16 x 1.336 (inlet) - G 3/8 (outlet)
19

O-ring FPM - Standard
Weight 2,0 kg
4.4 lbs
Inlet pressure 200 bar
2900 psi 44/218/360/725 psi Nm3/h (N2) bar max
Leak rate 3.10-9 mbar /s He Temperature range - 20C to + 60C
Outlet pressure 3/15/25/50 bar Nominal Flow 5/25/50/50
EPDM NBR Diaphragm Hastelloy
- 4F to + 140F
(M10 x 1 or 1/4 NPT)
Oxygen use OK with inlet pressure 30
Flow Curves
pressure bar
FLOW CURVE S 220-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi 10 bar / 14.5 psi Blue lineBlue P1 = 200 bar 2900 psi line P1 = /000 bar Red line Red P1 = 100 bar 1450 psi line P1 = /000 bar Green line P1= 50 bar / 725 psi
pressure psi
pressure bar
20.0 17.5
FLOW CURVE S 220-15 REGULATOR SET: 15 bar / 217.5 psi 7,5 bar / 108.75 psi 3,75 bar / 54.37 psi
pressure psi
290
5.0 4.5
72.5 65.25 58 50.75 43.5 36.25 29 21.75 14.5 7.25 0
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0

0 5 10 15 20 25 30
15.0 12.5 10.0 7.5 5.0 2.5 0.0

0
Blue lineBlue P1 = 200 bar 2900 psi line P1 = /000 bar Red line Red P1 = 100 bar 1450 psi line P1 = /000 bar Green line P1 = 50 bar / 725 psi
261 232 203 174 145 116 87 58 29 0
35
40
45
50
(83)
(166)
(250)
(333)
(416)
(500)
(583)
(666)
(750)
(833)
(333)
20
(666)
40
(1000)
60
(1332)
80
(1666)
100
pressure bar
FLOW CURVE S 220-25 REGULATOR SET: 2 5 bar / 362.5 psi 15 bar / 217.5 psi 10 bar / 145 psi line P1 = /000 bar Blue lineBlue P1 = 200 bar 2900 psi line P1 = /000 bar Red line Red P1 = 100 bar 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
pressure bar
FLOW CURVE S 220-50 REGULATOR SET: 50 bar / 725 psi 25 bar / 362.5 psi 12,5 bar / 181.25 psi
pressure psi
35 30 25 20 15 10 5 0
0
507.5 435 362.5 290 217.5 145 72.5 0 (333)

20
70 60 50 40 30 20 10 0
line P1 = /000 bar Blue lineBlue P1 = 200 bar 2900 psi line P1 = /000 bar Red line Red P1 = 100 bar 1450 psi
1015 870 725 580 435 290 145 0
(666)
40
(1000)
60
(1332)
80
(1666)
100
(2000)
120
(2332)
140
(2665)
160
(3000)
180
(3332)
200
(333)
20
(666)
40
(999)
60
(1332)
80
(1666)
100
(1999)
120
(2332)
140
(2665)
160
(2998)
180
(3332)
200
Body Material Outlet Pressure End Connections O-ring Materials (safety relief valve) Gauges Ports Configuration
I
Stainless steel
I
220
3 bar 44 psi 15 bar 218 psi 25 bar 360 psi 50 bar 725 psi
15
3
n
16 x 1.336 - G 3/8
15 1/4 NPT - 1/4 NPT 25 50 N
FPM
16 FPM - Standard
1
Without With
0 1
A
Standard Reverse Inlet/outlet*
A R
EPDM NBR
*Only available for NPT version ALL RIGHTS OF CHANGE RESERVED
20

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 3/8/16/35/50 bar 44/116/232/508/725 psi
1 inlet / 1 outlet Rear inlet (standard version) Rear thread for O2 application compatible Inlet/outlet gauge 1 safety relief valve
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications such as analytical instrumentation. -- Also used to create a controlled atmosphere in laboratories.
Key features -- Compact design suitable for multiple applications. -- Accurate pressure control for reliable service. -- Ergonomic handwheel for exceptional control. -- The Series 225 exists also with a side inlet (EL version). -- Wall mounting possible due to rear threads. -- Could be also equipped with a needle or shut off valve at the outlet. -- Fixed outlet pressure version available.
panel mounting
up to 16 bar/232 psi

Specifications
21

Weight 1,0 kg brass
2.2 lbs
2900 psi 44/116/232/508/725 psi Nm3/h (N2)
Outlet pressure 3/8/16/35/50 bar Nominal Flow 2/10/14/25/25
NBR FPM Diaphragm AISI 304 (3/8/16 version) Hastelloy (35/50 version)
- 4F to + 140F (M10 x 1)
Oxygen use OK for brass and stainless steel
only for outlet pressure: 3/8/16 bar
Flow Curves
pressure bar
4
FLOW CURVE S 225-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1= 50 bar / 725 psi
pressure psi
58
pressure bar
FLOW CURVE S 225-16 REGULATOR SET: 16 bar / 232 psi 8 bar / 116 psi 4 bar / 58 psi
pressure psi
20 18
Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi
290 261 232 203 174 145 116 87 58 29 0
43.5
16 14 12 10 8 6 4 2
29
14.5
(83)
(166)
10
(250)
15
(333)
20
(417)
25
(166)
10
(333)
20
(500)
30
(666)
40
(833)
50
(1000)
60
(1166)
70
(1332)
80
pressure bar
FLOW CURVE S 225-35 REGULATOR SET: 3 5 bar / 507.5 psi 17.5 bar / 253.75 psi 8,75 bar / 126.91 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi
pressure psi
pressure bar
80 70
FLOW CURVE S 225-50 REGULATOR SET: 50 bar / 725 psi 25 bar / 362.5 psi 12.5 bar / 181 psi
pressure psi
1160
40.0 36.0
580 522
32.0 28.0 24.0 20.0 16.0 12.0 8.0 4.0 0.0
464 406 348 290 232 174 116 58 0
1015 870 725 580 435 290 145 0
60 50 40 30 20 10 0
(166)
10
(333)
20
(500)
30
(666)
40
(833)
50
(1000)
60
(1166)
70
(1332)
80
(1500)
90
(1666)
100
(333)
20
(666)
40
(1000)
60
(1332)
80
(1666)
100
(2000)
120
(2332)
140
Body Material Outlet Pressure
End Connections
O-ring Material
Gauges
Handwheel
Ports Configuration
L
Chrome plated brass Stainless steel L I
225
3 bar 44 psi 8 bar 116 psi 16 bar 232 psi 35 bar 508 psi 50 bar 725 psi
16
n
8 1/4 NPT - 1/4 NPT 16 35 50 N NBR FPM
EPDM
Without With
A
A EL
3 16 x 1.336 - G 3/8 16 EPDM- Standard
0 With H Rear inlet (standard) (standard) 1 Without (fixed FX Lateral inlet outlet pressure)
22

-- Piston single stage -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 60 bar (870 psi)
1 inlet / 1 outlet Rear thread for
Applications -- Designed for cylinder regulator applications. -- Ideally suited to put vessels under pressure, such as for leak detection and purge of pipe work.
Key features -- Decompression of the downstream regulation system by turning the hand wheel counter-clockwise (SL 250). -- Accurate pressure control for reliable service. -- The SLS 250 version has a connection available so that a safety relief valve can be installed. -- Panel mounting possible due the rear threads. -- Can also be equipped with a needle or shut off valve at the outlet.
O2 application compatible Inlet/outlet pressure gauges

panel mounting
with brass version only

Specifications
Female ports 16 x 1.336 (inlet) - G 3/8
23
(outlet) or 1/4 NPT (inlet/outlet) Seat seal PCTFE

O-ring NBR - Standard
Weight 1,6 kg
3.5 lbs
Inlet pressure 300 bar Outlet pressure 60 bar
4350 psi 870 psi
EPDM FPM Piston AISI 316L
- 4F to + 140F
Nominal Flow 10 Nm3/h (N2) Oxygen use Brass only
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
FLOW CURVE S 250-60 REGULATOR SET: 60 bar / 870 psi 30 bar / 435 psi 15 bar / 217.5 psi
pressure psi
75 70 65 60 55
1087.5
Blue line P1 = 300 bar / 4350 psi Red line P1 = 150 bar / 2175 psi Green line P1 = 75 bar / 1088 psi
1015 942.5 870 797.5 725 652.5 580 507.5 435 362.5 290 217.5 145 72.5 0
50 45 40 35 30 25 20 15 10 5 0
(166)
10
(333)
20
(500)
30
(666)
40
(833)
50
(1000)
60
Body Material Safety Relief Valve Configuration End Connection O-ring Material Gauges
L
L I
With decompression system With a safety valve connection available

S
250
N
1/4 NPT - 1/4 NPT
N
NBR
Without With EPDM FPM
1
0 1
16 x 1.336 - G 3/8 16 NBR - Standard
24

-- Piston single stage -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 200 bar (2900 psi)
1 inlet / 1 outlet Rear thread for panel mounting O2 application compatible Inlet/outlet pressure gauges
Applications -- Designed for cylinder regulator applications. -- Ideally suited to put vessels under pressure, leak detection and purge of pipe work.
Key features -- Similar to the series S250 but with a higher possible outlet pressure (200 bar) -- Decompression of the downstream regulation system possible by turning the hand wheel counter clockwise (SL 400). -- Accurate pressure control for reliable service. -- The SLS 400 version has a connection available so that a safety relief valve can be installed. -- Panel mounting possible due the rear threads. -- Can also be equipped with a shut off valve at the outlet.
with brass version only

Specifications
25

O-ring NBR - Standard
Weight 1,6 kg
3.5 lbs
4350 psi 2900 psi
EPDM FPM Piston AISI 316L
- 4F to + 140F
Nominal Flow 30 Nm3/h (N2) Oxygen use Brass only
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
pressure psi
220 200 180
Blue line P1 = 300 bar / 4350 psi
3190 2900 2610 2320 2030 1740 1450 1160 870 580 290 0
160 140 120 100 80 60 40 20 0
(833)
50
(1666)
100
(2500)
150
(3333)
200
Body Material Safety Relief Valve Configuration End Connections O-ring Material Gauges
L
L I
With decompression system With a safety valve connection available

S
400
n
1/4 NPT - 1/4 NPT
N
NBR
Without With EPDM FPM
1
0 1
16 x 1.336 - G 3/8 16 NBR - Standard
26

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 10/16/25/50 bar 145/232/363/725 psi
Reduce ownership cost 1 inlet / 1 outlet Rear thread for front O2 application compatible,
Applications -- Designed for application as a cylinder regulator. -- Ideally suited for high purity gases and high-pressure applications requiring high flow and precise outlet pressure, such as for laser applications. -- Used also in nuclear research department where the precision of the outlet pressure and high flow are essential.
Key features -- Best-in-class pressure control with Balanced-Valve Technology: the effect of inlet pressure fluctuations on outlet pressure are minimized. The BV-technology enables the delivery of a very stable outlet pressure and flow even with high flow. -- BV Technology also increases the useful lifetime of the regulator and reduces ownership cost.
panel mounting
up to 200 bar inlet pressure for stainless steel version Inlet/outlet pressure gauges 1 safety relief valve

Specifications
27

Weight 2,4 kg
5.3 lbs
4350 psi 145/232/363/725 psi
Outlet pressure 10/16/25/50 bar
NBR FPM Diaphragm AISI 304 Hastelloy (25/50 bar)
- 4F to + 140F
Nominal Flow 50/50/50/100 Nm3/h (N2) Oxygen use Brass version: OK
(M10 x 1 or 1/4 NPT)
Stainless steel version: inlet pressure 200 bar
Flow Curves
pressure bar
FLOW CURVE S 800-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.35 psi Blue line P1 = 300 bar / 4350 psi Red line P1 = 150 bar / 2175 psi Green line P1 = 75 bar / 1088 psi
pressure psi
pressure bar
FLOW CURVE SL 800-16 REGULATOR SET: 16 bar / 232 psi 8 bar / 116 psi 4 bar / 58 psi
pressure psi
12 11
174 159.5
18 16
10 9 8 7 6 5 4 3 2 1 0
0 20 40 60 80 100
145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
14 12 10 8 6 4 2 0
0
261 232 203 174 145 116 87 58 29 0
(333)
(666)
(1000)
(1332)
(1666)
(2000)
120
(2332)
140
(2665)
160
(3000)
180
(3332)
200
(416)
25
(833)
50
(1250)
75
(1666)
100
(2082)
125
(2500)
150
(2915)
175
(3332)
200
(3748)
225
(4165)
250
pressure bar
FLOW CURVE S 800-25 REGULATOR SET: 2 5 bar / 362.5 psi 12,5 bar / 181.25 psi 6.25 bar / 90.62 psi Blue line P1 = 300 bar / 4350 psi Red line P1 = 150 bar / 2175 psi Green line P1 = 75 bar / 1088 psi
pressure psi
pressure bar
pressure psi
30
435
60 55
25
362.5
50 45 40 35 30 25 20 15 10 5
Blue Line P1 = 300 bar / 4350 psi Red Line P1 = 150 bar / 2175 psi
870 797.5 725 652.5 580 507.5 435 362.5 290 217.5 145 72.5 0
20
290
15
217.5
10
145
72.5
0
0
0 (416)
25
(833)
50
(1250)
75
(1666)
100
(2082)
125
(2500)
150
(2915)
175
(3332)
200
(3748)
225
(4165)
250
(4581)
275
(5000)
300
0
0
(666)
40
(1332)
80
(2000)
120
(2665)
160
(3332)
200
(4000)
240
(5331)
280
(4664)
320
(6000)
360
(6664)
400
(7330)
440
Body Material Outlet Pressure End Connections O-ring Material Gauges
S
Raw brass
L
LB L I
800
10 bar 145 psi 16 bar 232 psi 25 bar 362.5 psi 50 bar 725 psi
16
n
16 1/4 NPT - 1/4 NPT 25 50 n
EPDM
Without With NBR FPM
1
0 1
10 16 x 1.336 - G 3/8 16 EPDM - Standard
28

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 10/16/25 bar 145/232/362.5 psi
Reduce ownership cost 1 inlet / 2 outlets Rear thread for panel mounting O2 application compatible Outlet pressure gauge
Applications -- Designed for application as line regulator; for many applications that need a high flow. -- Ideally suited for high purity gases and high-pressure applications requiring high flow and precise outlet pressure, such as for laser applications. -- Also used for industrial applications as a line regulator
Key features -- Best-in-class pressure control with Balanced Valve Technology: the effect of inlet pressure fluctuations on outlet pressure are minimized. The BV-technology enables the delivery of a very stable outlet pressure and flow even with high flow. -- BV Technology also increases useful lifetime of the regulator and reduces the ownership cost.

Specifications
Female ports G 3/8 (inlet/outlet)
29

Weight 2,4 kg
5.3 lbs
4350 psi 145/232/362.5 psi
Outlet pressure 10/16/25 bar
NBR FPM Diaphragm Hastelloy (25/50 bar) AISI 304
- 4F to + 140F
Nominal Flow 50/50/50 Nm3/h (N2) Oxygen use OK
Gauges low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
FLOW CURVE S 810-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.35 psi
pressure psi
pressure bar
FLOW CURVE SL 810-16 REGULATOR SET: 16 bar / 232 psi 8 bar / 116 psi 4 bar / 58 psi
pressure psi
12 11
174 159.5
18 16
261 232 203 174 145 116 87
10 9 8 7 6 5 4 3 2 1 0
0 20 40 60 80 100 120
145 130.5 116 101.5 87 72.5 58
14 12 10 8 6 4 2 0
0
(333) (666) (1000) (1332) (1666) (2000) (2332)
140
43.5 29 14.5 0
200
(416)
25
58 29 0
(2665)
160
(3000)
180
(3332)
(833)
50
(1250)
75
(1666)
100
(2082)
125
(2500)
150
(2915)
175
(3332)
200
(3748)
225
(4165)
250
pressure bar
FLOW CURVE S 810-25 REGULATOR SET: 2 5 bar / 362.5 psi 12,5 bar / 181.25 psi 6.25 bar / 90.62 psi
pressure psi
30
435
25
362.5
20
290
15
217.5
10
145
0
0 25 50 75 100 125 150 175
200 225 250 275 300
72.5
0
(5000)
(416)
(833)
(1250)
(1666)
(2082)
(2500)
(2915)
(3332)
(3748)
(4165)
(4581)
Lb
Raw brass
LB
810
10 bar 145 psi 16 bar 232 psi 25 bar 362.5 psi
16
10 G 3/8 - G 3/8
g
G N 16 1/4 NPT - 1/4 NPT 25
epdm
EPDM - Standard NBR FPM Without With
1
0 1
30
Series GD 100 | SINGLE STAGE HP HIGH FLOW REGULATOR

-- Diaphragm single stage -- Purity up to 5.5 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 10 bar (145psi) -- Acetylene version (AD - C2H2): P1= 25 bar (362.5 psi) P2=1,2 bar (17.4 psi)
High flow regulator 1 inlet / 1 outlet O2 application compatible Inlet/outlet pressure gauges Acetylene version
Applications
-- Designed for cylinder regulator applications. -- Ideally used in industrial applications requiring high flow - particulary to supply gas to welding machines.
Key features
-- Exceptionally durable -- Acetylene version available: P1=25 bar / P2=1,2 bar / Q=10 Nm3/h. -- If used with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream. -- Medical CE version available (see Meditec catalogue).
available (AD)

Specifications
Ports inlet: 16 x 1.336 (Female)
31
outlet: M20 x 1,5 (Male)
Weight 4,6 kg
10.1 lbs
Inlet pressure 200 bar (2900 psi) Outlet pressure 10 bar / 145 psi Nominal Flow 100 Nm3/h (N2)
AD: 25 bar / 362.5 psi AD: 1,2 bar / 17 psi
Seat seal PA 6.6 Diaphragm Butyl Body Material Raw brass
- 4F to + 140F (M10 x 1)
AD: 10 Nm3/h
Oxygen use OK
Flow Curves
FLOW CURVE GD 100 REGULATOR SET: 1 0 bar / 14.5 psi 5 bar / 72.5 psi FLOW CURVE GD 100 AD - REGULATOR SET: 1,2 bar / 17.4 psi
pressure bar
pressure psi
pressure bar
pressure psi
12
174 159.5
2.00 1.80
29 26.1 23.2 20.3 17.4 14.5 11.6 8.7
10
145 130.5
1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00

0
116 101.5
87 72.5
58
0
0
Blue line P1 = 200 bar / 2900 psi Red line = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
(333)
20
43.5 29 14.5 0 (3000)

180
Blue line P1 = 25 bar / 362.5 psi Red line P1 = 12,5 bar / 181 psi Green line P1= 6,25 bar / 91 psi
(41)
2.5
5.8 2.9 0 (416)

25
(666)
40
(1000)
60
(1333)
80
(1666)
100
(2000)
120
(2333)
140
(2666)
160
(83)
(124)
7.5
(166)
10
(208)
12.5
(250)
15
(290)
17.5
(333)
20
(374)
22.5
Type Inlet Connection Gauges
GD
100
Standard version Acetylene version
100 AD
16
100 16 x 1.336 16 Without
1
0 1
With
32
Series TGD 250 | SINGLE STAGE HP HIGH FLOW REGULATOR

-- Diaphragm single stage -- Purity up to 5.5 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 20 bar (290psi)
High flow regulator 1 inlet / 1 outlet O2 application compatible Inlet/outlet pressure gauges
Applications -- Ideally suited for distribution of gases in industrial applications requiring very high flow like feeding of welding machines
Key features -- Exceptionally durable -- Medical CE version available (see Meditec catalogue).

Specifications
Ports inlet: 16 x 1.336 (Female)
33
outlet: M20 x 1,5 (Male)
Weight 4,6 kg
10.1 lbs
2900 psi 290 psi
Seat seal PCTFE Diaphragm Butyl Body Material Raw brass
- 4F to + 140F (M10 x 1)
Nominal Flow 250 Nm3/h (N2) Oxygen use OK
Flow Curves
FLOW CURVE TGD 250 REGULATOR SET: 20 bar / 290 psi 10 bar / 145 psi 5 bar / 72.5 psi
pressure bar
pressure psi
25
362.5
20
290
15
217.5
10
145
72.5
0
0
0 (833)
50
(1666)
100
(2500)
150
(3333)
200
(4166)
250
(5000)
300
Inlet Connection Gauges
TGD
250
16
16 x 1.336
16 Without
1
0 1
With
34
Dual stage high-pressure regulators
Series D 215 | DUAL STAGE HP REGULATOR

-- Diaphragm dual stage -- Purity up to 6.0 -- Inlet pressure: 200 (2900 psi) or 300 bar (4350 psi) -- Outlet pressure: 1/3/8/16 bar 14.5/44/116/232 psi
Compact and light 1 inlet / 1 outlet O2 application compatible Inlet/outlet pressure gauges 1 safety relief valve
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications requiring a very stable outlet pressure.
Key features -- The D 215 regulator is based on the high-performing S 215 technology but delivers superior outlet pressure stability. -- Accurate pressure control for reliable service and guarantees a stable outlet pressure. -- Compact, ergonomic and lightweight.
weight design

specifications
35

Weight 1,45 kg
3.2 lbs
Inlet pressure 200 bar / 300 bar Outlet pressure 1 / 3 / 8 / 16 bar Nominal Flow 0,4/1,2/2,9/3,5
2900 psi / 4350 psi 14.5/44/116/232 psi Nm3/h (N2)
NBR FPM Diaphragm AISI 304
- 4F to + 140F
(1/4 NPT or M10 x 1)
Flow Curves
pressure bar
1,5
FLOW CURVE D 215-1 REGULATOR SET: 1 bar / 15 psi 0.5 bar / 7.25 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
21,75
pressure bar
4.0 3.5
FLOW CURVE D 215-3 REGULATOR SET: 3 bar/43.5 psi 1,5 bar/21.75 psi
pressure psi
29
3.0 2.5 2.0 1.5 1.0 0.5
21.75
1,0
14,50
14.5
0,5
7,25
7.25
0,0
(16.6)
(33.2)
(50)
(66.6)
(83.3)
(100)
(116)
(133)
(150)
(166)
10
0,00
0.0
(83)
(166)
10
(250)
15
(333)
20
(416)
25
(500)
30
pressure bar
FLOW CURVE D215-8 REGULATOR SET: 8 bar / 116 psi 4 bar / 58 psi 2 bar / 29 psi Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 50 bar / 725 psi
pressure psi
pressure bar
FLOW CURVE D 215-16 REGULATOR SET: 16 bar / 250 psi 8 bar / 116 psi 4 bar / 58 psi
pressure psi
10 9
145 130.5
20
290
7 6 5 4 3 2 1 0
101.5 87 72.5 58 43.5 29 14.5 0
116
16
Blue line P1 = 200 bar / 2900 psi Red line P1 = 100 bar / 1450 psi Green line P1 = 25 bar / 362.5 psi
232
12
174
116
58
0 0 5 (83) 10 (167) 15 (250) 20 (333) 25 (417) 30 (500) 35 (583) 40 (667) 45 (750)
0 50 (833)
(83)
(166)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
(666)
40
(750)
45
(833)
50
Body Material Inlet Pressure Outlet Pressure Ports End Connections O-ring Material Gauges Ports Configuration
l
l I
215
200
200 bar 2900 psi 300 bar 4350 psi
200 1 bar
8
14.5 psi 300 3 bar 44 psi 8 bar 116 psi 16 bar 232 psi
1 5 ports 3 6 ports 8 16
n
5 16 x 1.336
EPDM
16 EPDM - Standard Without N NBR
1
With
1 Reverse
A
0 Standard A r
- G 3/8 6 1/4 NPT - 1/4 NPT
inlet/outlet
FPM
36

-- Piston/bellow dual stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 1/3/10 bar 14.5/44/145psi
Compact and light 1 inlet / 2 outlets O2 application compatible Inlet/outlet pressure gauges 1 safety relief valve
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications requiring a very stable outlet pressure together with a very sensitive set up of this outlet pressure.
Key features -- The D 230 regulator is based on the S 20 proven bellow technology. -- Accurate pressure control for reliable service and guarantees a stable outlet pressure due to the combination of the piston and bellow technology. -- Compact and lightweight design. -- Fixed outlet pressure version available.
weight design (brass only)

specifications
Female ports 16 x 1.336 (inlet) - G 3/8 (outlet) Seat seal O-ring Piston Below
37
or 1/4 NPT (inlet/outlet) PTFE EPDM - Standard NBR FPM Brass (Brass version) AISI 316L (SS version) Bronze or AISI 316L (SS version)
Weight 1,6 kg
3.5 lbs
2900 psi 14.5/44/145 psi Nm3/h (N2)
Outlet pressure 1/3/10 bar Nominal Flow 2/2,5/3,5
- 4F to + 140F
(M10 x 1 or 1/4 NPT)
Oxygen use Brass only
Flow Curves
pressure bar
FLOW CURVE D 230-1 REGULATOR SET: 1 bar / 14.5 psi
pressure psi
pressure bar
FLOW CURVE D 230-3 REGULATOR SET: 3 bar / 43,5 psi 1,5 bar / 21.75 psi
pressure psi
1.2
17.4
72.5
14.5
58
0.8
11.6
43.5
0.6
8.7
29
0.4
5.8
0.2
0
2.9
0
14.5
(17)
(33)
(50)
(67)
0
(8)
0.5
0 (17)
1
(25)
1.5
(33)
(42)
2.5
(50)
(58)
3.5
(67)
pressure bar
FLOW CURVE D 230-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi
pressure psi
12 11
174 159,5 145 130,5 116 101,5 87 72,5 58
10 9 8 7 6 5 4 3 2 1 0
0 1 2 3 4 5 6
(16.66) (33.33) (49.98) (66.66) (83.33) (100) (116.66)
7
43,5 29 14,5
10
(133.33)
(150)
(166.66)
Body Material Outlet Pressure End Connections O-ring Material Gauges Handwheel
l
l i
230
1 bar 14.5 psi 3 bar 44 psi 10 bar 145 psi
10
1
N
In: 16 x 1.336 Out: G 3/8 3 In: NPT 1/4 Out: G 3/8 10 NPT 1/4 (inlet/Outlet)
ng NBR n
epdm
16 EPDM - Standard
1
Without With
0 1
h
With - standard Without (fixed outlet pressure)
H FX
FPM
38
Series D 230-0.1 | DUAL STAGE HP REGULATOR

-- Piston/diaphragm dual stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 0,01 - 0,1 bar 0.14 - 1.45 psi
Compact and
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications requiring a very stable, very sensitive and very low outlet pressure.
Key features -- The DL 230-0.1 regulator is based on the SL 20-0.1 proven low pressure regulator. -- Guarantees a stable low flow due to the combination of the piston and diaphragm technologies. -- The rear threads can be used for wall mounting. -- Can also be equipped with a needle or shut off valve at the outlet.
1 inlet / 2 outlets O2 application compatible Inlet/outlet pressure gauges 1 safety relief valve
lightweight design (brass only)
Rear inlet view - with cylinder connector

specifications
Female ports 16 x 1.336 (inlet) - G 3/8 (outlet) Seat seal O-ring Piston Diaphragm
39
1/4 NPT (inlet) - G 3/8 (outlet) 1/4 NPT (inlet/outlet) PTFE EPDM - Standard NBR FPM Brass (Brass version) AISI 316L (SS version) AISI 304
3.3 lbs Leak rate 10-8 mbar /s He

Temperature range - 20C to + 60C
Weight 1,5 kg
2900 psi 0.14/1.45 psi
Outlet pressure 0,01/0,1 bar
- 4F to + 140F
Nominal Flow 0,5 Nm3/h (N2) Oxygen use Brass only
(M10 x 1 or 1/4 NPT)
Flow Curves
FLOW CURVE D 230-0.1 REGULATOR SET: 0,1 bar / 1.45 psi
pressure bar
pressure psi
0.15
2.03 1.74 1.45 1.16 0.87
0.10
0.05
0.58 0.29
0.00
0.5
(8)
(17)
(25)
1.5
(33)
Body Material End Connections O-ring Material Gauges
l
l i
230
0.1
n
In: 16 x 1.336 Out: G 3/8 In: NPT 1/4 Out: G 3/8 NPT 1/4 (inlet/outlet)
ng NBR n
epdm
16 EPDM - standard
1
Without With
0 1
FPM
40

-- Diaphragm/bellow dual stage -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 1/3/10 bar (14.5/44/145 psi)
Compact and
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications requiring a very stable outlet pressure together with a very sensitive set up of this outlet pressure.
Key features -- The D 235 regulator is based on the S 20 proven bellow technology. -- Accurate pressure control for reliable service and guarantees a stable outlet pressure due to the combination of the diaphragm and bellow technology. -- Compact and lightweight design. -- Can also be equipped with a needle or shut off valve at the outlet.
1 inlet / 2 outlets O2 application compatible Inlet/outlet pressure gauges 1 safety relief valve
lightweight design
Front view

specifications
Female ports 16 x 1.336 (inlet) - G 3/8 (outlet) Seat seal O-ring Diaphragm Bellow
41
or 1/4 NPT (inlet/outlet) PTFE (1st stage) EPDM (2nd stage) EPDM - Standard NBR FPM AISI 304 Bronze (Brass version) AISI 316L (SS version)
Weight 1,4 kg
3.0 lbs
4350 psi 14.5/44/145 psi
Outlet pressure 1 /3 /10 bar
- 4F to + 140F
Nominal Flow 1/2/5,5 Nm3/h (N2) Oxygen use OK for brass and stainless steel
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
FLOW CURVE D 235-1 REGULATOR SET: 1 bar / 14.5 psi
pressure psi
pressure bar
FLOW CURVE D 235-3 REGULATOR SET: 3 bar / psi 43.5 psi 1,5 bar / 21.75 psi
pressure psi
1.20
1.00
14.5
17.4
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5
72.5 65.25 58 50.75 43.5 36.25 29 21.75 14.5 7.25 0
0.80
11.6
0.60
8.7
0.40
5.8
0.20
2.9
0.00
0
0 (17)
1
(33)
(50)
(67)
0.0
0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(167)
pressure bar
FLOW CURVE D 235-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi
pressure psi
12 11
174 159.5 145 130.5
10 9 8 7 6 5 4 3 2 1 0
0 1 2 3 4 5 6 7 8 9 10
Blue Line P1 = 300 bar / 4350 psi Red line P1 = 150 bar / 2175 psi Green line P1 = 75 bar / 1088 psi
116 101.5 87 72.5 58 43.5 29 14.5 0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(133)
(150)
(167)
l
l I
235
3
1 3 10
g
In: 16 x 1.336 Out: G 3/8 1/4 NPT - 1/4 NPT
G N
epdm
1
0 1
42
Dual stage high-pressure regulator regulators
Series D 235-0.1 | DUAL STAGE HP REGULATOR

-- Diaphragm dual stage -- Purity up to 6.0 -- Inlet pressure: 300 bar (4350 psi) -- Outlet pressure: 0,1 bar (1.45 psi)
Compact and light 1 inlet / 2 outlets O2 application compatible Inlet/outlet pressure gauges 1 safety relief valve
Applications -- Designed for cylinder regulator applications. -- Ideally suited for pure, inert and mildly corrosive gas applications requiring a very stable, very sensitive and very low outlet pressure.
Key features -- The DL 235-0.1 regulator is based on the SL 20-0.1 proven low pressure regulator. -- Guarantees a stable low flow due to the large diaphragm. -- Could be also equipped with a needle or shut off valve at the outlet.
weight design (brass only)

specifications
43

Weight 1,45 kg
3.2 lbs
Inlet pressure 300 bar Outlet pressure 0,1 bar
4350 psi 1.4 psi
- 4F to + 140F
Nominal Flow 0,5 Nm3/h (N2) Oxygen use Brass only
(M10 x 1 or 1/4 NPT)
Flow Curves
FLOW CURVE D 235-0.1 - REGULATOR SET: 0,1 bar / 1.45 psi
pressure bar
pressure psi
0.12 0.11 0.10 0.09
1.74
1.60 1.45 1.31 1.16 1.02 0.87 0.73 0.58 0.44 0.29 0.15 0.00
0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0.00

0 0.5 1 1.5 2
(8)
(17)
(25)
(33)
Body Material End Connections O-ring Material Gauges
l
Chrome plated brass
l
235
0.1
n
In: 16 x 1.336 Out: G 3/8 NPT 1/4 (inlet/outlet)
n
epdm
16 EPDM - Standard
1
Without With
0 1
NBR FPM
44
Low-pressure regulators
Series S 10 | LINE REGULATOR

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 6.0 -- Inlet pressure: 25 bar (360 psi) -- Outlet pressure: 3 bar ( 44 psi) or 8 bar (116 psi)
Compact design Reduce the ownership cost Front panel mounting O2 application compatible
Applications -- Designed as a second stage line regulator for laboratory applications such as: gas delivery to inductive plasma spectrometer, protection and support gas for chromatograph, environmental emission monitoring, industrial hygiene or safety monitors and trace impurity analyzers. -- Ideally suited as a NH3 line regulator (EPDM stainless steel version).
Key features -- As a second level of regulation, the SL 10 will supply a precise outlet pressure to the process. It can be used for many applications that need a high flow. -- Flexible wall or panel mounting possible with its compact design, the rear threads and fixing ring. -- Best-in-class pressure control with Balanced-Valve Technology: the effect of inlet pressure fluctuations on outlet pressure are minimized. BV-technology delivers an exceptionally stable outlet pressure and flow even with high flow line regulators. -- Longer useful regulator lifetime and lower total ownership cost.
specifications
Female ports G 3/8 or 1/4 NPT
45
(inlet/outlet)
Weight 0,6 kg
1.32 lbs
Inlet pressure max 25 bar
360 psi 44 /116 psi
Seat seal NBR (brass version)
FPM (SS version)
Outlet pressure 3/8 bar
FPM (SS version) EPDM Diaphragm AISI 304 (brass version) Hastelloy (SS version)
O-ring NBR (brass version)
- 4F to + 140F
Nominal Flow 4,5/12 Nm3/h (N2) Oxygen use OK for brass and stainless steel
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
4
FLOW CURVE S10-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi
pressure psi
58
pressure bar
10 9 8
pressure psi
145
Blue line P1 = 25 bar / 362.5 psi Red line P1 = 12,5 bar / 181 psi
outlet pressure- bar and psi outlet pressure- bar and psi
3
43,5
Blue line P1 = 25 bar / 362.5 psi 130.5 Red line P1 = 12,5 bar / 181 psi
116 101.5 87 72.5 58 43.5 29 14.5 0
7 6 5 4 3 2 1
29
14,5
(33.33 )
(66.66)
(100)
(133.33)
(166.66)
10
(200)
12
(83)
(167)
10
(250)
15
(333)
20
(417)
25
(500)
30
Body Material Outlet Pressure End Connections O-ring Material Gauges Mounting Ports Configuration
l
l i
10
3 bar 44 psi 8 bar 116 psi
8
3 8
g
G 3/8 - G 3/8 1/4 NPT - 1/4 NPT
g
nbr
fr0
a
a r
NBR - Standard with Without 0 Without Fixing FR0 Standard brass version Ring Configuration n FPM - Standard with With 1 With Fixing FR1 Reverse inlet/ stainless steel version Ring outlet EPDM
46
Series s 15 | LINE REGULATOR

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 6.0 -- Inlet pressure: 25 bar (360 psi) -- Outlet pressure: 10 bar (145 psi)
Reduce the ownership cost Front panel mounting O2 application compatible
Applications -- Used as a line regulator for high-flow industrial or lab applications.
Key features -- As a second level of regulation the S 15 will supply a precise outlet pressure to the process. -- Can be used for wall or panel mounting with its compact design, the rear threads and fixing ring. -- Best-in-class pressure stability with Balanced-Valve Technology (Balanced-Valve Technology): the effect of inlet pressure fluctuations on outlet pressure are minimized. BV-technology delivers an exceptionally stable outlet pressure and flow even with high flow line regulators. -- Longer useful regulator lifetime and lower total ownership cost.
specifications
47
(inlet/outlet)
Weight 1,2 kg
2.64 lbs
360 psi 145 psi
Seat seal NBR (brass version)
FPM (SS version)
FPM (SS version) EPDM Diaphragm AISI 304 (brass version) Hastelloy (SS version)
O-ring NBR (brass version)
- 4F to + 140F
Nominal Flow 50 Nm3/h (N2) Oxygen use OK for brass and stainless steel
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
pressure psi
11 10 9
159.5 145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
8 7 6 5 4 3 2 1 0
(333)
20
(667)
40
(1000)
60
(1333)
80
(1667)
100
(2000)
120
(2333)
140
(2667)
160
Body Material Outlet Pressure End Connections O-ring Material Gauges Ports Configuration
l
l i
15
10 bar 145 psi
10
10 G 3/8 - G 3/8
g
g
nbr
a
a r
1/4 NPT - 1/4 NPT
NBR - Standard with Without 0 Standard brass version Configuration n FPM - Standard with With 1 Reverse stainless steel version inlet/outlet EPDM
48

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 1/3/10 bar 14.5/44/145 psi
Accurate pressure delivery Compact design 2 inlets / 2 outlet Rear Inlet for panel mounting O2 application compatible
Applications -- Used as a line or point of use regulator for specialty gas applications requiring very precise repeatability and a high precision of outlet pressure -- Ideally suited for laboratory applications like: gas delivery to inductive plasma spectrometer, protection and support gas for chromatograph.
Key features -- Bellow technology provides a large range of accurate outlet pressures in a compact design. -- With its compact design, the rear threads and its fixing ring (option) it can be used for wall or panel mounting. -- Acetylene version available: Series S 20 AD & S 25 AD (See pages 66 and 68)
(see technical data)
specifications
49
(inlet/outlet)
Weight 0,5 kg
1.1 lbs
725 psi 14.5/44/145 psi
Seat seal EPDM O-ring EPDM - Standard
Outlet pressure 1/3/10 bar
NBR FPM Bellow Bronze or AISI 316L (SS version)
- 4F to + 140F
Nominal Flow 2/2,5/3,5 Nm3/h (N2) Oxygen use inlet pressure 30 bar max.
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
for brass and stainless steel
Flow Curves
FLOW CURVE S 20-1 REGULATOR SET: 1 bar / 14.5 psi 0,5 bar / 7.25 psi FLOW CURVE S 20-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi 0,75 bar / 10.88 psi
pressure bar
pressure psi
pressure bar
pressure psi
2.0
29
4.0 3.5
58
Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
1.5
21.75
50.75 43.5 36.25 29 21.75 14.5 7.25 0
3.0 2.5 2.0 1.5 1.0 0.5
1.0
14.5
0.5
7.25
0.0
0.0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(83)
(167)
10
(250)
15
pressure bar
FLOW CURVE S 20-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
12
174 159.5 145 130.5
10
116 101.5
87 72.5
58 43.5
29 14.5
(83)
3
(167)
10
(250)
15
Flow rate - Nm /h (Nlpm) in Nitrogen (N2)
Body Material Outlet Pressure End Connections O-ring Material Gauge Mounting Ports Configuration
l
l i
20
10
1 3 10
g
G 3/8 - G 3/8 1/4 NTP - 1/4 NPT
g n
EPDM
EPDM - Standard NBR FPM
fr0
a
a r
Without 0 Without Fixing FR0 Standard Ring Configuration 1 With Fixing FR1 Reverse With Ring inlet/outlet
50
Series S 20-0.1 | LINE REGULATOR

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 0,01 - 0,1 bar 0.14 - 1.45 psi
Very low outlet pressure 2 inlets /2 outlet Rear inlet Rear threads for High accuracy due to O2 application compatible
Applications -- The Series S 20-0.1 is used as a line regulator for lab applications requiring a low outlet pressure less than 10 mbar (1.45 psi).
Key features -- With the rear threads, it can be used for wall mounting.
panel mounting
large diaphragm
Rear inlet view
specifications
51
(inlet/outlet)
Weight 0,6 kg
1.32 lbs
725 psi 0.14 - 1.45 psi
Outlet pressure 0,01 - 0,1 bar
- 4F to + 140F
Nominal Flow 0,5 Nm3/h (N2) Oxygen use inlet pressure 30 bar max.
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
FLOW CURVE S 20-0.1 REGULATOR SET: 0,1 bar / 1.45 psi 0,05 bar / 0.73 psi
pressure psi
0.2
2.9
0.15
0.1
1.45
0.05
(8)
0.5
(17)
(25)
1.5
Body Material End Connections O-ring Material Gauges Ports Configuration
l
l i
20
0.1
G 3/8 - G 3/8
g
g n
Epdm
1
0 1
a
Standard Configuration Reverse inlet/outlet
a r
1/4 NPT - 1/4 NPT
52

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 3/8/10/16/35 bar 44/116/145/232/508 psi
Accurate pressure delivery Compact design 2 inlets / 2 outlets Rear Inlet for panel O2 applications compatible
Applications -- Designed for line regulator applications in petrochemical, industrial and laboratory environments. -- Used in calibration gas mixtures for petrochemical industry; environmental emission monitoring, industrial hygiene or safety monitors and trace impurity analyzers. -- Also commonly used to oxygenate fish-breeding tanks.
Key features -- With its compact design, the rear threads and its fixing ring it can be used for wall or panel mounting. -- Multiple mounting possibilities due to its inlet/outlet.
mounting
Rear inlet view
specifications
53
(inlet/outlet)
Weight 0,8 kg
1.8 lbs
725 psi 44/116/145/232/508 psi
Outlet pressure 3/8/10/16/35 bar
NBR FPM Diaphragm AISI 304 (3/8/10 bar) Hastelloy (16/35 bar)
- 4F to + 140F
Nominal Flow 2,5/3/3,5/5,5/10 Nm3/h (N2) Oxygen use inlet pressure 30 bar max.
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
5 4.5
FLOW CURVE S 55-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi Green line P1 = 12,5 bar / 181 psi
pressure psi
72.5 65.25
pressure bar
11 10 9
pressure psi
159.5
4 3.5 3 2.5 2 1.5 1 0.5 0
58 50.75 43.5 36.25 29 21.75 14.5 7.25 0
145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
8 7 6 5 4 3 2 1 0
(83)
(167)
10
(250)
15
(333)
20
(83)
(167)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
pressure bar
FLOW CURVE S 55-16 REGULATOR SET: 1 6 bar / 232 psi 8 bar / 116 psi 4 bar / 58 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
pressure bar
pressure psi
18 16
261 232 203 174 145 116 87 58 29 0
40 35
580
14 12 10 8 6 4 2 0
508 435 363 290 218 145 73 0
30 25 20 15 10 5 0
(83)
(167)
10
(250)
15
(333)
20
(417)
25
(500)
30
(583)
35
(83)
(167)
10
(250)
15
(333)
20
(417)
25
Body Material Outlet Pressure End Connections O-ring Material Gauges Mounting Ports Configuration
l
l i
55
3 bar 44 psi 8 bar 116 psi 10 bar 145 psi 16 bar 232 psi 35 bar 508 psi
35
3 8 10 16 35
g
G 3/8 - G 3/8 1/4 NPT - 1/4 NPT
g
EPDM
EPDM Standard n NBR FPM With
1
Without
0 1
fr1
a
a r
Without Fixing FR0 Standard Ring configuration fr1 Reverse With Fixing Ring inlet/outlet
54
Series DC 50 | HIGH FLOW LINE REGULATOR

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 5.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 8/15/40 bar 116/217/580 psi -- Acetylene version (AD - C2H2): P1=20 bar (290 psi) P2 = 0,8 bar (12 psi)
1 inlet / 1 outlet Rear thread for O2 application compatible High flow
Applications -- For all applications requiring a low pressure with high flow. -- Ideally suited as line regulator in combination either with MOD supply board or CEN switch over board.
Key features -- Low pressure regulator with high flow, without vibration. -- Best-in-class pressure stability with Balanced-Valve Technology: the effect of inlet pressure fluctuations on outlet pressure is minimized. BV-technology enables the delivery of a very stable outlet pressure and flow even with high flow line regulators. -- reduced strain on the seat increases regulator life and reduces the ownership cost. -- Acetylene version available: P1=20 bar/P2 = 0,8 bar/Q=10 Nm3/h -- For use with acetylene this product must be installed with a flash back arrestor complying with the standard EN 730 located downstream.
panel mounting
specifications
55
(inlet/outlet)
Weight 1,4 kg
3.1 lbs
Inlet pressure 50 bar (725 psi)
AD: 20 bar (290 psi) 116/217/580 - 12 psi (AD) 10 Nm3/h (AD)
Outlet pressure 8/15/40 - 0,8 bar (AD)
NBR FPM Diaphragm EPDM
- 4F to + 140F (G1 /4 or 1/4 NPT)
Nominal Flow 150/300/300 Nm3/h (N2) Oxygen use OK
Gauges Low pressure
Flow Curves
pressure bar
10
FLOW CURVE DC 50-8 REGULATOR SET: 8 bar / 116 psi 4 bar / 58 psi Blue line P1 = 50 bar / 725 psi
pressure psi
145
pressure bar
20 18
FLOW CURVE DC 50-15 REGULATOR SET: 15 bar / 217.5 psi 7,5 bar / 108.75 psi 3,75 bar / 54.38 psi
pressure psi
290
253.75 217.5 181.25 145 108.75 72.5 36.25 0
116
15 13 10 8 5 3
87
58
29
(333)
20
(666)
40
(1000)
60
(1333)
80
(1666)
100
(2000)
120
(2333)
140
(2666)
160
(3000)
180
(3333)
200
(3666)
220
(4000) (4333)
240
260
(500)
30
(1000)
60
(1500)
90
(2000) (2500)
120
150
(3000)
180
(3500)
210
(4000)
240
(4500) (5000)
270
300
(5500)
330
(6000)
360
(6500)
390
pressure bar
45 40
FLOW CURVE DC 50-40 REGULATOR SET: 4 0 bar / 580 psi 20 bar / 290 psi 10 bar / 145 psi Blue line P1 = 50 bar / 725 psi
pressure psi
652.5 580
pressure bar
1.50 1.40 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00
0
FLOW CURVE DC 50-AD regulator SET: 0,8 bar / 12 psi
pressure psi
21.75
30 25 20 15 10 5 0
435 362.5 290 217.5 145 72.5 0
35
507.5
14.5
7.25
0 (17)
1
(500)
30
(1000)
60
(1500)
90
(2000)
120
(2500)
150
(3000)
180
(3500)
210
(4000)
240
(4500)
270
(5000)
300
(5500)
330
(6000)
360
(6500)
390
(33)
(50)
(66)
(83)
(100)
(116)
(133)
(150)
(167)
10
(183)
11
Outlet Pressure End Connections O-ring Material Body Material Gauges
50
40
g
g n
EPDM
EPDM - Standard NBR FPM
l
Chrome plated brass Raw brass
l
1
Without
0 1 Lb With
8 G 1/2 - G 1/2 8 bar 116 psi 15 1/2 NPT - 1/2 NPT 15 bar 217 psi 40 40 bar 580 psi Acetylene version ad 0,8 bar (12 psi)
56
Point of Use Regulators
Series S 21 | POINT OF USE

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 1/3/10 bar 14.5/44/145 psi -- Acetylene version (AD - C2H2): P1 = 20 bar (290 psi) P2 = 1,5 bar (21.75 psi)
Precise pressure delivery Compact design 2 inlets / 1 outlet Rear Inlet for panel mounting Integrated or multi-turn O2 applications compatible
Applications -- Used as a line regulator or point of use for specialty gas applications.
Key features -- Based on the Series S 20 technology. -- Bellow technology provides a large range of accurate outlet pressures in a compact design. -- With the rear threads and fixing ring (option) it can be used for wall or panel mounting. -- Acetylene version also available. -- For use with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream. -- The inlet shut off valve reduces the risk of gas dispersion when closed.
shutoff valve
1/4 turn valve
Multi-turn valve
RD10 needle valve

specifications
57
or 1/4 NPT (inlet/outlet) Seat seal EPDM

Weight 0,9 kg
2.0 lbs
Inlet pressure 50 bar (725 psi) Outlet pressure 1/3/10 bar
AD: 20 bar (290 psi)
Leak rate 10-8 mbar /s He Temperature range -20C to + 60C
NBR FPM Diaphragm (Valve) Hastelloy
-4F to + 140F
14.5/44/145 psi AD: 1,5 bar (21.75 psi) Nominal Flow 2/2,5/3,5 Nm3/h (N2) AD: 1 Nm3/h
Oxygen use inlet pressure 30 bar max.
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Bellow Bronze (Brass version)
AISI 316L (SS version)
Flow Curves
pressure bar
2.0
FLOW CURVE S 21-1 REGULATOR SET: 1 bar / 14.5 psi 0,5 bar / 7.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
29
pressure bar
4.0 3.5
pressure psi
58
50.75 43.5 36.25 29 21.75 14.5 7.25 0
1.5
21.75
3.0 2.5 2.0 1.5 1.0 0.5
1.0
14.5
0.5
7.25
0.0
0.0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(83)
(167)
10
(250)
15
pressure bar
12
FLOW CURVE S 21-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
174 159.5 145
pressure bar
2.0
FLOW CURVE S 21-AD REGULATOR SET: 1,5 bar / 21.75 psi
pressure psi
29
10
1.5
21.75
130.5
116 101.5
87 72.5
1.0
14.5
58 43.5
0.5
7.25
29 14.5
0.0
(83)
(167)
10
(250)
15
(33)
(67)
(100)
(133)
Body Material Outlet Pressure End Connections O-ring Material Gauge Shut-off valve Plate
l
l I
s 21
10
g
g n
epdm
NBR FPM With
1
0 1
1/4v
1/4 turn valve Multi-turn valve
std
1/4 V Without plate STD MV Mounted on an EMB
1 G 3/8 - G 3/8 1 bar 14.5 psi 3 1/4 NPT- 1/4 NPT 3 bar 44 psi 10 10 bar 145 psi Acetylene version AD 1,5 bar (21.75 psi)
EPDM - standard Without
aluminum stand M With metal plate
58
Labline 22 | Modular point of use

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 1/3/10 bar 14.5/44/145 psi -- Acetylene version (AD - C2H2): P1 = 20 bar (290 psi) P2 = 1,5 bar (21.75 psi)
Accurate pressure delivery Compact design 1 inlet / 2 outlets Modular concept O2 applications compatible
Applications -- A terminal point of use for specialty gas applications in a laboratory or in a workshop.
Key features -- Based on the Series 20 platform -- Bellow technology provides a large range of accurate outlet pressures in a compact design. -- Acetylene version also available. -- For use with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream. -- With the inlet shut off valve the regulator is independent from the installation and can be easily removed.
EMB version w/ MV valve
M version w/ 1/4V valve
SLS22 - EMB -10 - G - EPDM - 1 - MV version
COL version w/ MV valve

specifications
Female ports F: G 1/4 (inlet-COL version)
59
G 3/8 or 1/4 NPT (inlet) G 3/8 or 1/4 NPT (outlet) Seat seal EPDM
Weight 1,5 kg
3.3 lbs
NBR FPM Diaphragm Hastelloy

Bellow Bronze or
-4F to + 140F
14.5/44/145 AD: 1,5 bar (21.75 psi) Nominal Flow 2/2,5/3,5 Nm3/h (N2) AD: 1 Nm3/h
Gauges Low pressure
(M10 x 1 or NPT)
Flow Curves
FLOW CURVE SL S 22-1 REGULATOR SET: 1 bar / 14.5 psi 0,5 bar / 7.25 psi FLOW CURVE sl s 22-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi 0,75 bar / 10.88 psi
pressure bar
pressure psi
pressure bar
pressure psi
2.0
29
4.0 3.5
58
1.5
21.75
50.75 43.5 36.25 29 21.75 14.5 7.25 0
3.0 2.5 2.0 1.5 1.0 0.5
1.0
14.5
0.5
7.25
0.0
0.0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(83)
(167)
10
(250)
15
pressure bar
FLOW CURVE sl s 22-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
pressure bar
FLOW CURVE sl s 22-AD REGULATOR SET: 1,5 bar / 21.75 psi
pressure psi
12
174 159.5
2.0
29
130.5
10
145
1.5
21.75
116 101.5
87 72.5
1.0
14.5
58 43.5
0.5
7.25
29 14.5
0.0
(83)
(167)
10
(250)
15
(33)
(67)
(100)
(133)
Body Material Version Outlet Pressure End Connection O-ring Material Gauges Valve
l
l I
s22
emb
10
1
g
G 3/8 - Female (outlet) 3 NPT 1/4 (outlet)
10 Note: inlet G 1/4 AD g
epdm
EPDM standard n NBR FPM Without With
1
0 1
v
1/4 turn valve Multi-turn valve
1/4V MV
With Aluminum EMB 1 bar stand 14.5 psi COL 3 bar With pillar 44 psi M 10 bar With Metal Plate 145 psi Acetylene version 1,5 bar 21.75 psi
with COL version
60
MONO Series S 15 | COMPACT POINT OF USE

-- Diaphragm single stage -- Balanced-Valve Technology -- Purity up to 6.0 -- Inlet pressure: 25 bar (360 psi) -- Outlet pressure: 10 bar (145 psi)
Compact design Reduction of connection High Flow 2 inlets/ 2 outlets Rear inlet for front O2 application compatible
Applications -- A terminal point of use for specialty gas applications in a laboratory or in a workshop.
Key features -- Made up with a Series S 15 type regulator and a VLM 200 valve. -- Best-in-class pressure stability with Balanced-Valve Technology: the effect of inlet pressure fluctuations on outlet pressure are minimized. BV-technology enables the delivery of a very stable outlet pressure and flow even with high flow line regulators. -- Reduces the strain on the seat to increase regulator life and reduce the ownership cost. -- Compact outline dimensions and ergonomic design make this point of use suitable for laboratory furniture.
(avoid leakage)
panel mounting

specifications
61

Weight Aluminum: 1,86 kg ( 4.10 lbs)
Stainless steel: 3,8 kg ( 8.37 lbs)
360 psi 145 psi
Leak rate 10-8 mbar /s He Temperature -20C to + 60C range -4F to + 140F Gauges Low pressure
NBR FPM Diaphragm AISI 304 (aluminum version) Hastelloy (SS version)
Nominal Flow 50 Nm3/h (N2) Oxygen use OK
(M10 x 1)
Flow Curves
11 10 9 8
pressure bar
pressure psi
159.5 145 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0
7 6 5 4 3 2 1 0
(333)
20
(667)
40
(1000)
60
(1333)
80
(1667)
100
(2000)
120
(2333)
140
(2667)
160
Body Material Outlet Pressure End Connections O-ring Material Configuration
a
Aluminum Stainless steel
A I
15
10 bar 145 psi
10
10 G 3/8 - G 3/8
g
g n
epdm
EPDM - standard NBR FPM
a
Standard configuration reverse gauge (180)*
a r
1/4 NPT - 1/4 NPT
*Inlet Down - outlet Top ALL RIGHTS OF CHANGE RESERVED
62
MONO Series S 20 | COMPACT POINT OF USE

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 1/3/10 bar (14.5/44/145 psi) -- Acetylene version (AD - C2H2): P1 = 20 bar (290 psi) P2 = 1,5 bar (21.75 psi)
Accurate pressure delivery Compact design 2 inlets / 2 outlets Rear inlet for front O2 application compatible
Applications -- A terminal point of use for specialty gas applications in a laboratory or a workshop.
Key features -- Made up with a Series S 20 type regulator and a VM20 valve. -- Compact outline dimensions and ergonomic design make this point of use suitable for laboratory furniture. -- Acetylene version also available. -- For use with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream. -- The Mono S 20 can be integrated easily on furniture due to its compact design
panel mounting
Acetylene version

specifications
63

Weight Aluminum: 1,25 kg ( 2.75 lbs)
Stainless steel: 2,75 ( 6.06 lbs)
Leak rate 10-8 mbar /s He Temperature -20C to + 60C range -4F to + 140F Gauges Low pressure
NBR FPM Diaphragm Hastelloy

(valve) Bellow Bronze or
Oxygen use inlet pressure 30 bar max. for
(M10 x 1)
aluminum and stainless steel
Flow Curves
pressure bar
FLOW CURVE mono S 20-1 REGULATOR SET: 1 bar / 14.5 psi 0,5 bar / 7.25 psi
pressure psi
pressure bar
FLOW CURVE mono S 20-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi 0,75 bar / 10.88 psi
pressure psi
2.0
29
4.0 3.5
58
1.5
21.75
50.75 43.5 36.25 29 21.75 14.5 7.25 0
3.0 2.5 2.0 1.5 1.0 0.5
1.0
14.5
0.5
7.25
0.0
0.0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(83)
(167)
10
(250)
15
pressure bar
FLOW CURVE mono S 20-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
pressure bar
FLOW CURVE mono S 20-AD REGULATOR SET: 1,5 bar / 21.75 psi
pressure psi
12
174 159.5
2.0
29
130.5
10
145
1.5
21.75
116 101.5
87 72.5
1.0
14.5
58 43.5
0.5
7.25
29 14.5
0.0
(83)
(167)
10
(250)
15
(33)
(67)
(100)
(133)
Body Material Outlet Pressure End Connections O-ring Material Configuration
A
Aluminum Stainless steel
A I
20
g
g n
epdm
a
Standard configuration reverse gauge (180)*
a r
1 G 3/8 - G 3/8 1 bar 14.5 psi 3 1/4 NPT - 1/4 NPT 3 bar 44 psi 10 10 bar 145 psi Acetylene version AD 1,5 bar (21.75 psi)
*Inlet Down - outlet Top
64
MONO Series 40 | COMPACT POINT OF USE

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 1/3/10 bar (14.5/44/145 psi) -- Acetylene version (AD - C2H2): P1 = 20 bar (290 psi) P2=1,5 bar (21.75 psi)
Precise pressure delivery Compact design 3 inlets / 3 outlets 1 integrated needle valve Rear Inlet for panel O2 application compatible
Applications -- Used as a point of use for laboratory applications -- Suitable for all applications requiring the regulation of flow.
Key features -- Made up with a Series S 20 type regulator, a VM 20 valve and a RDL 10 regulation needle valve. -- Compact outline dimensions and ergonomic design make this point of use suitable for laboratories furniture. -- Vertical or horizontal orientation. -- Acetylene version available. -- For use with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream.
mounting
Acetylene version
Horizontal version
Vertical version

specifications
65
or 1/4 NPT (inlet/outlet) Seat seal EPDM (Alu version) FPM (SS version)
O-ring EPDM (Alu version)
Weight Aluminum: 1 kg ( 2.20 lbs) Leak rate 10-7 mbar /s He Temperature -20C to + 60C range -4F to + 140F Gauges Low pressure
Stainless steel: 2 kg ( 4.40 lbs)
FPM (SS version) NBR Valve Dia- Hastelloy

phragm
Oxygen use inlet pressure 30 bar max. for
(M10 x 1)
aluminum and stainless steel
Bellow Bronze (Alu version) or
Flow Curves
pressure bar
FLOW CURVE mono S 40-1 REGULATOR SET: 1 bar / 14.5 psi 0,5 bar / 7.25 psi
pressure psi
pressure bar
FLOW CURVE mono S 40-3 REGULATOR SET: 3 bar / 43.5 psi 1,5 bar / 21.75 psi 0,75 bar / 10.88 psi
pressure psi
2.0
29
4.0 3.5
58
1.5
21.75
50.75 43.5 36.25 29 21.75 14.5 7.25 0
3.0 2.5 2.0 1.5 1.0 0.5
1.0
14.5
0.5
7.25
0.0
0.0
(17)
(33)
(50)
(67)
(83)
(100)
(117)
(83)
(167)
10
(250)
15
pressure bar
FLOW CURVE mono S 40-10 REGULATOR SET: 1 0 bar / 145 psi 5 bar / 72.5 psi 2,5 bar / 36.25 psi Blue line P1 = 50 bar / 725 psi Red line P1 = 25 bar / 362.5 psi
pressure psi
pressure bar
2.0
FLOW CURVE mono S 40-AD REGULATOR SET: 1,5 bar / 21.75 psi
pressure psi
29
12
174 159.5 145
10
1.5
21.75
130.5
116 101.5
87 72.5
1.0
14.5
58 43.5
0.5
7.25
29 14.5
0.0
(83)
(167)
10
(250)
15
(33)
(67)
(100)
(133)
Body Material Outlet Pressure End Connections O-ring Material Mounting Options Orientation
s
Aluminum
A
A i
40
10
1 bar 14.5 psi 3 bar 44 psi 10 bar 145 psi Acetylene version 1,5 bar 21.75 psi
1 3 10 AD
g
G 1/4 - Female 1/4 NPT - Female
g
epdm
EPDM - standard (Aluminum version) n FPM - standard (SS version) NBR
a
Without plate standard With plate
a p
V
Vertical Horizontal
V H
Stainless steel
66
acetylene application regulators
Series S 20 AD | LINE REGULATOR for Acetylene (C2H2)

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 20 bar (290 psi) -- Outlet pressure: 1,5 bar (21.75 psi)
Accurate pressure delivery Compact design 2 inlets / 2 outlets Rear inlet Acetylene applications
Applications -- The Series S 20 AD is used as line regulator or point of use for acetylene applications such as atomic absorbsion analyzers.
Key features -- Bellow technology provides a large range of accurate outlet pressures in a compact design. -- With its compact design, the rear threads and its fixing ring (option) it can be used for wall or panel mounting. -- Multiple mounting positions possible due to multiple inlet ports. -- For use with acetylene: this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream.
for panel mounting

specifications
67
(inlet/outlet)
Weight 0,5 kg
1.1 lbs
290 psi 21.75 psi
Seat seal EPDM O-ring EPDM Bellow AISI 316L
Outlet pressure 1,5 bar
- 4F to + 140F
Nominal Flow 1,5 Nm3/h (C2H2) Oxygen use No
Gauges Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
pressure psi
2.0
29
1.5
21.75
1.0
14.5
0.5
7.25
0.0
(33)
(67)
(100)
(133)
Body Material End Connections Gauges Ports Configuration Mounting
L
Chrome plated brass
L
20
AD
G 3/8 - G 3/8
g
g n
EPDM
Without With
1
0 1
A
Standard Configuration Reverse inlet/ outlet
a
FR0
Without Fixing FR0 Ring r With Fixing fr1 Ring
1/4 NTP - 1/4 NPT

68
Series S 25 AD | CYLINDER REGULATOR for Acetylene (C2H2)

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 20 bar (290 psi) -- Outlet pressure: 1,5 bar (21.75psi)
Accurate pressure delivery Compact design 1 inlet / 2 outlets Rear Inlet with Acetylene applications
Applications -- Used as a cylinder regulator for acetylene applications such as atomic absorbsion analyzers.
Key features -- Bellow technology provides a large range of accurate outlet pressures in a compact design. -- The Series S 25 could be equipped with several cylinder connection types. -- 2 gauges for high and low pressure. -- For use with acetylene, this product must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream.
cylinder connection
Right view

specifications
Inlet ports C2H2 Cylinder connection Outlet ports G 3/8 or 1/4 NPT Seat seal EPDM O-ring EPDM Bellow AISI 316L
69
in accordance to standard
Weight 0,5 kg
1.1 lbs
290 psi 21.75 psi
Outlet pressure 1,5 bar
- 4F to + 140F
Nominal Flow 1,5 Nm3/h (C2H2) Oxygen use No
Gauges High / Low pressure
(M10 x 1 or 1/4 NPT)
Flow Curves
pressure bar
pressure psi
2.0
29
1.5
21.75
1.0
14.5
0.5
7.25
0.0
(33)
(67)
(100)
(133)
Inlet Connection Outlet Connection Gauges Mounting
25
ad
g
g n
epdm
1
Without high and low pressure gauges With high and low pressure gauges
0 1
fr0
Without Fixing Ring With Fixing Ring
FR0 fr1
h G 3/8 - G 3/8 AFNOR H Type (cylind. connect.) British Standard BS4 1/4 NPT- 1/4 NPT
CGA Standard DIN Standard

510
477-12
70
FLOw regulators
Series S 20 FM | FLOW METER REGULATOR

-- Bellow single stage -- Purity up to 6.0 -- Inlet pressure: 50 bar (725 psi) -- Outlet pressure: 3,5 bar fixed (50 psi) -- Rear inlet
Precise pressure delivery Compact design 1 inlet / 1 outlet Gas-dedicated flow meter O2 application compatible
Applications -- Ideally suited for laboratory applications that require a very sensitive outlet flow adjustment with visual control of the flow.
Key features -- Based on the best-selling S 20 point of use. -- All flow meters have a preset outlet pressure at 3,5 bar. -- Equipped with one of two available versions of an adjustable flow meter: 0-5 lpm or 0-15 lpm. -- The flow meter is dedicated to a gas.Please indicate it when you order. -- Bellow technology provides a precise outlet pressure in a compact design.
specifications
Female ports 16 x 1.336 or G 3/8 or 1/4 NPT
(inlet) Hose barb 8.5 mm (outlet) Seat seal PCTFE

O-ring EPDM Bellow Bronze
Weight 1,5 kg
3.3 lbs
725 psi 50 psi
Outlet pressure 3,5 bar fixed Nominal Flow 5 or 15 lpm
-4F to + 140F
(according to gas) for brass and stainless steel
Gauges High pressure
(M10 x 1 or 1/4 NPT)
Body Material End Connections Gas Type Flow Scale
l
Chrome plated brass
l
20
fm
g
G 3/8 - Female NPT 1/4 Female 16 x 1.336 Female
G N
Nitrogen Argon
O2
15
N2 0 to 15 lpm Ar 0 to 5 lpm He O2 15 5
16 Helium
Oxygen
flow regulators
71
Series S 225 FM | FLOW METER REGULATOR

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 3,5 bar fixed (50 psi) -- Rear inlet
Precise pressure delivery Compact design 1 inlet / 1 outlet Gas dedicated flow meter O2 application compatible
Key features -- Based on the S 225. -- All flow meters have a preset outlet pressure at 3,5 bar. -- Equipped with one of two available adjustable flow meters: 0-5 lpm or 0-15 lpm. -- With our flow meters you have the advantage to have a very sensitive adjusted outlet flow. -- The flow meter is dedicated to a gas. Please indicate it when you order.
specifications
Female ports 16 x 1.336 or 1/4 NPT (inlet)
Hose barb 8,5mm (outlet)
Weight 1,5 kg
3.3 lbs
2900 psi 50 psi
Seat seal PCTFE O-ring EPDM Diaphragm AISI 304
Outlet pressure 3,5 bar fixed Nominal Flow 5 or 15 lpm Oxygen use OK
-4F to + 140F
(according to gas)
(M10 x 1 or 1/4 NPT)
l
Chrome plated brass
l
225
fm
16
16 x 1.336 Female NPT 1/4 Female
16 Nitrogen N
O2
15
Argon Helium Oxygen
72
FLOw regulators
SERIES D 230 FM | FLOW METER REGULATOR

-- Piston / Bellow dual stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 3,5 bar fixed (50 psi) -- Rear inlet
Precise pressure delivery Compact design 1 inlet / 1 outlet Gas-dedicated flow meter O2 application compatible
Key features -- Based on the D 230. -- All flow meters have a preset outlet pressure at 3,5 bar. -- Equipped with one of two available adjustable flow meters: 0-5 lpm or 0-15 lpm. -- With our flow meters you have the advantage to have a very sensitive adjusted outlet flow. -- The flow meter is dedicated to a gas. Please indicate it when you order.
specifications
Female ports 16 x 1.336 or 1/4 NPT (inlet)
Hose barb 8,5 mm (outlet)
Weight 1,5 kg
3.3 lbs
2900 psi 50 psi
Seat seal PTFE O-ring EPDM Piston Brass Bellow Bronze
Outlet pressure 3,5 bar fixed Nominal Flow 5 or 15 lpm Oxygen use OK
-4F to + 140F
(according to gas)
M10 x 1 or 1/4 NPT
l
Chrome plated brass
l
230
fm
16
16 x 1.336 Female NPT 1/4 Female
16 Nitrogen N
O2
Argon Helium Oxygen
15
flow regulators
73
Series S 70 / D 70 | CONSTANT FLOW REGULATOR

-- Piston single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 4,13 bar (60 psi) -- Rear inlet
Extreme accurate Compact design 1 inlet / 1 outlet O2 application compatible
Applications -- Designed for calibration applications where predetermined pressure and flow are required, and for portable cylinder use. Key features -- This piston regulator has 1 inlet/1 outlet. -- Exist as single (S 70) or dual stage (D 70 special version). -- Compact, light weight design, ideal for portability. -- Hand tightened assembly to cylinder is excellent for field applications. -- Actuation with control knob or push button. -- Please indicate, on any order, the maximum inlet pressure, the setting pressure and the set flow.
flow delivery
S 70 single stage
D 70 dual stage
ck - control knob
pb - push button
NV - no valve
specifications
Female ports Inlet: C10 or 1/8 NPT
Outlet: Hose barb or 1/8 NPT Seat seal PCTFE O-ring FPM - Standard EPDM NBR Piston Brass (brass version) AISI 303 (SS version) or Push button
Weight 0,31 kg
0.83 lbs
2900 psi 2,06 bar (30 psi) - option
Leak rate 1.10-4 mbar /s He Temperature range -20C to + 60C
Outlet pressure 4,13 bar (60 psi) - standard Nominal Flow preset from 0,25 to 7 lpm Oxygen use OK for brass and stainless steel
-4F to + 140F 1/8 NPT
Actuation Control knob
Body Material Outlet Pressure Inlet Connection Outlet Connection Actuation O-ring Material Gauge
l
Nickel plated brass Stainless steel
l i
70
60
c10
hb
ck
fpm
1
0 1 2 3 4
c10 Hose barb hb Control Knob ck FPM standard Without 4,13 bar (60 psi) 60 5/8 x 18 UNF - standard standard 2,06 bar (30 psi) 30 NPT 1/8 - Female n NPT 1/8 - Female n1 Push Buton pb epdm With 1000 psi
NPT 1/8 - Male
n2 No valve
NV NBR
With 3000 psi With 4000 psi With 315 bar
74
FLOw regulators
Series S 75 | CONSTANT FLOW REGULATOR

-- Piston single stage -- Purity up to 6.0 -- Inlet pressure: 200 bar (2900 psi) -- Outlet pressure: 3,5/6 bar (50/87 psi) -- Rear inlet -- Flow selector (0,3 - 15 lpm)
Extremely accurate Compact design 1 inlet / 1 outlet O2 application compatible
Applications -- Designed for calibration applications where predetermined pressure and adjustable flow are required, and for portable cylinder use.
Key features -- Piston technology allows having a very stable flow outlet pressure. -- Equipped with a flow selector (10 positions) with 3 different maximum outlet flows (3 - 5 - 15 lpm). -- Compact, light weight design, ideal for portability. -- Integrated safety relief valve.
flow delivery
(brass only)
flow regulators
specifications
Female ports Inlet: C 10 or 1/4 NPT
75
Outlet: Hose barb or DR 6 or 1/4 tube fitting Seat seal PCTFE

O-ring FPM - Standard
Weight 0,70 kg
1.54 lbs
2900 psi 6 bar (87 psi) - option 0,3 to 15 lpm
Leak rate 10-4 mbar /s He Temperature range -20C to +60C
Outlet pressure 3,5 bar (50 psi) - standard Nominal Flow Preset from Oxygen use Brass only
EPDM NBR Piston Brass (brass version) AISI 316L (SS version)
-4F to +140F (1/8 NPT)
nominal flow settings (lpm)

B03
0,3 0,5 0,7 0,9 1,2 1,5 2 2,5 3
B05
0,5 0,75 1 1,5 2 2,5 3 4 5
B15
1 1,5 2 3 4 5 8 10 15
Body Material Outlet Pressure Inlet Connection Outlet Connection Flow Selector O-ring Material Gauge
l
Nickel plated brass Stainless steel
l i
75
3.5
c10
hb
c10 Hose barb hb 3 lpm
b05
b05 epdm b15 NBR
fpm
b03 FPM - standard
1
Without With 4000 psi With 315 bar
0 1 2
3.5 5/8 x 18 UNF 3.5 bar 50 psi - standard 6 NPT 1/4 6 bar 87 psi Female
(standard) n NPT 1/8 - Female n1 5 lpm standard db6 15 lpm 6 mm tube fitting 1/4 tube fitting db 1/4
76
Back pressure regulator
DEI 10 | BACK PRESSURE REGULATOR

-- Diaphragm single stage -- Purity up to 6.0 -- Inlet pressure: 1 - 15 bar (14.5 - 217.5 psi)
Protection device Also for liquid application Compact design 2 Inlet / 1 outlet Rear threads for front
Applications -- Designed either for liquid or gas applications -- Back pressure regulators are often used for: control of pressure in recirculation loops relief of excess system pressure vacuum regulation
Key features -- Back pressure regulators work just like relief valves, but the emphasis is on steady state pressure control instead of on/off pressure protection or pressure reduction. -- Regulates the higher inlet (upstream) pressure by opening up only as much as necessary to hold back the desired pressure at the inlet (upstream).
panel mounting
Do not use the back Pressure Regulator as a shutoff device
specifications
Female ports 1/4 NPT
(inlet/outlet)
Weight 0,65 kg 1.43 lbs Leak rate 3.10-9 mbar /s He Temperature - 20C to + 60C range - 4F to + 140F Gauges No
Inlet pressure 1 to 15 bar 14.5 to 217.5 psi Flow P1 = 10 bar, 26 Nm3/h (N2) Pset = 7 bar Flow P1 = 21,5 bar 80 Nm3/h (N2) Pset = 15 bar Oxygen use No
Seat seal PFA Flow coefficient CV 0.38 KV 0,33 Diaphragm Hastelloy
Body Material Pressures set End Connections Gauges
dEI
Stainless steel
DEI
10
7 bar 101.5 psi 15 bar 217.5 psi
15
7 15
n
NTP 1/4 Female
n
0
Without With
0 1
valves
77
SERIES VP 300 | LINE VALVE

-- 300 bar line valve -- Multi-turn, non-turning seat disc for various pure gases (special oxygen version available)
300 bar Multi-turn Special oxygen version
KEY FEATURES -- Purity up to 5.5 -- Multi-turn version -- Raw brass or chrome plated brass -- Special oxygen version -- Standardinlet/outlet: G 3/8 - Female -- Fixing ring for flush-mounting in panel -- Rear thread for panel mounting OPTIONS -- Various inlet/outlet connections including F: 3/8 NPT, double ring 6 mm -- Many inlet/outlet fittings available
LINE VALVE
Rear mounting
specifications
or 3/8 NPT (inlet/outlet) Seat seal Polyamide

O-ring EPDM
Leak rate 1.10-4 mbar /s He Temperature range -20C to + 50C
Inlet pressure 300 bar Flow coefficient Cv 0.30 1/4 turn No handwheel Multi-turn OK handwheel
4350 psi Kv 0,26
-4F to + 122F
Seat orifice size 4 mm
Bottom tapered OK Weight 0,38 kg
0.84 lbs
Oxygen use Special O2 version
Body Material End Connections Oxygen Version
p
Raw brass
l
lb l
300
NPT 3/8 Female
g
G 3/8 - Female
g n
STD
Standard Oxygen use
std o2
Chrome plated brass

78
valves
series VM 200 | LINE VALVE

-- High-pressure line valve for various pure gases. -- High leak tightness through diaphragm sealing. SHUT-OFF VALVE KEY FEATURES -- Purity up to 6.0 -- Multi-turn version or turn version -- Chrome plated brass or stainless steel -- Standard inlet/outlet: G 3/8 - Female -- Fixing ring for flush-mounting in panel -- Rear thread for panel mounting OPTIONS -- Many inlet/outlet fittings available -- Special stainless steel, oxygen version
Multi-turn version
High-pressure Diaphragm seal Multi-turn or turn Special O2 version

1/4 turn version
Rear mounting
specifications
(inlet/outlet)
Weight 0,5 kg 1.10 lbs Leak rate 10-8 mbar./s He Temperature -20C to + 50C range -4F to + 122F Seat orifice size 4 mm
Inlet pressure 200 bar 2900 psi Flow coefficient 0,04 (brass) (Kv) 0,12 for turn (stainless steel) 0,21 for multi-turn (stainless steel) Oxygen use special part number for O2 application.
Seat seal PCTFE Diaphragm Hastelloy Bottom tapered OK
Body Material Version End Connections Hand wheel Oxygen version
L
l i
200
straight
d
D
g
G 3/8 - Female
G
1/4 T
1/4 turn
1/4 t standard
std
STD 02 MT oxygen use
NPT 1/4 - Female N Multi-tum 6 mm tube fitting 10 mm tube fitting

DB6 DB10
valves
79

-- Low pressure line valve for various pure gases. -- High leak tightness through diaphragm sealing. SHUT-OFF VALVE KEY FEATURES -- Purity up to 6.0 -- Multi-turn version -- or 1/4 turn version -- Nickel plated brass or stainless steel -- Rear thread for panel mounting OPTIONS -- Various inlet/outlet connections -- Many inlet/outlet fittings available 1/4 turn version
Multi-turn version
Low-pressure Diaphragm seal Multi-turn or 1/4 turn O2 application compatible
Rear mounting
specifications
(inlet/outlet)
Leak rate 10-8 mbar /s He Temperature -20C to + 50C range -4F to + 122F Seat orifice size 4 mm
Inlet pressure 50 bar 725 psi Flow coefficient 0,04 (brass) (Kv) 0,12 for turn (stainless steel) 0,21 for multi-turn (stainless steel) Oxygen use Brass only, pressure 30 bar
Seat seal PCTFE Diaphragm Hastelloy Bottom tapered OK Weight 0,3 kg 0.66 lbs
Body Material End Connections Hand wheel
l
l i
50
NPT 1/4 Female
g
G 3/8 - Female
g n
1/4 t
1/4 Turn Multi-turn
1/4 t mt
80
Valves

-- Low-pressure shut off valve for various pure gases. -- High leak tightness through diaphragm sealing. SHUT-OFF VALVE KEY FEATURES -- Purity up to 6.0 -- Straight version (VLM 20 D/VIM 20 D) -- Right-angle version (VLM 20 E/VIM 20 E) -- Wall-mounted version (VLM 20 M/VIM 20 M) -- Panel version (VLM 20 T/VIM 20 T) -- Rear thread for panel mounting (VLM 20 E/VIM 20 E) OPTIONS -- turn version -- M: G 3/8 inlet (VLM 20 D/VIM 20 D) -- Panel mounting board -- Point of use regulator -- Many inlet/outlet fittings available
Low-pressure Diaphragm seal Straight or 90 version O2 application compatible
VLM 20 E 1/4 turn
VLM 20 E Multi-turn
VLM 20 E 1/4 turn
VLM 20 E Multi-turn
Valves
specifications
Seat seal PCTFE / EPDM O-ring EPDM - Standard
81
Weight 0,95 kg 2.10 lbs Leak rate 10-8 mbar /s He Temperature -20C to + 50C range -4F to + 122F Seat orifice size 4 mm
Flow coefficient Cv 0.14 Kv 0,12 Inlet pressure 50 bar 725 psi Ports G 3/8 (inlet/outlet) Oxygen use Brass: OK Stainless steel: only E / M versions with side inlet
NBR FPM Bottom tapered OK
Diaphragm Hastelloy
VLM 20 D 1/4 turn
VLM 20 M 1/4 turn
VLM 20 D 1/4 turn
VLM 20 M 1/4 turn
Body Material Version End Connections O-ring Material Hand wheel
LM20
M
d e m
G
G 3/8 NPT 1/4 on demand
g N
epdm
EPDM - standard NBR FPM 1/4 turn
1/4 T
1/4 MT
Chrome plated lm20 straight brass Stainless steel im20 right angle with plate
Multi-turn
82
Valves

-- Low-pressure line valve for various pure gases. -- High leak tightness through diaphragm sealing and high flow through 8mm orifice. SHUT-OFF VALVE KEY FEATURES -- Purity up to 6.0 -- Multi-turn or turn versions -- Chrome plated brass or stainless steel -- Standard inlet/outlet: G 3/8 - Female -- Fixing ring for flush-mounting in panel -- Rear thread for panel mounting OPTIONS -- Choice of two inlet/outlet connections available (see configurator)
Low-pressure High flow Diaphragm seal Multi-turn or turn O2 application compatible
1/4 turn version
Multi-turn version
Rear mounting
specifications
(inlet/outlet)
650 psi Kv 0,50
Seat seal PCTFE Diaphragm Hastelloy Bottom tapered OK Weight 0,75 kg
-4F to + 122F
Flow coefficient Cv 0.58
Seat orifice size 8 mm
1.65 lbs
Body Material End Connections Hand wheel
L
l i
45
G
G 3/8 - Female NPT 1/4 - Female
1/4 T
1/4 turn
1/4 T MT
N Multi-turn
Valves
83
RD 10 | METERING VALVE
-- Needle valve for various pure gases. -- This metering valve has a very precise flow setting and is ideally suited for use on regulators outlet.
Low-pressure With needle Multi-turn
KEY FEATURES -- Purity up to 6.0 -- Multi-turn version -- Straight or right angle versions -- Chrome plated brass or stainless steel -- Small size -- Low torque operation -- Very precise setting -- Delivered with light grey handwheel -- Not to be used as a shut off valve OPTIONS -- Many inlet/outlet fittings available -- NBR or FPM O-ring -- For acetylene use, this valve must imperatively be installed with a flash back arrestor complying with standard EN 730 located downstream
NEEDLE VALVE
specifications
Ports Male inlet : G 3/8 or 1/4 NPT Seat seal Metal / metal O-ring EPDM - Standard
Female outlet: G 1/8 or 1/4 NPT
Max of turns open 3 turns for max flow Weight 0,085 kg
870 psi Cv 0.174. Kv 0,15 (90)
0.19 lbs
Flow coefficient Cv 0.116. Kv 0,10 (straight) Oxygen use OK with P1=30 bar max
NBR FPM Bottom tapered No
Temperature range -20C to + 50C
-4F to + 122F
Seat orifice size 2,5 mm
Body Material End Connections Version O-ring Material
RD
L
l i
10
D
D E
EPDM
G Straight In: G 3/8 - Male Out: G 1/8 - Female N Right angle In: 1/4 NPT - Male Out: 1/4 NPT - Female GN In: G 3/8 - Male Out: 1/4 NPT - Female NG In: 1/4 NPT - Male Out: G 1/8 - Female
84
Regulator Accessories
PRESSURE GAUGEs
Spare part pressure gauges for ROTAREX regulators, points of use, supply boards or switch over boards pressure gauges Standard or contact versions available Vertical or rear mounting connections
KEY FEATURES -- Standard or contact gauge -- Vertical (6 oclock) or rear mounting -- Connections: M10 x 1 - Male, 1/4 NPT - Male or G 1/4 - Male -- Many pressure ranges available -- Material: cuprous alloy or stainless steel -- Accuracy class: 1,6 (standard gauge) -- Nominal diameter: 63/50/40/36 mm
OPTIONS -- Different connections -- Different diameters Sliding contact gauge -- Normally Open (NO) -- Accuracy class: 2,5 -- Adjustment of switching point with a key -- Contact load 10 Watt / 10 VA. -- Switching current min. 20 mA, max. 500 mA. -- Cable length 2 m, cable outlet left-hand -- Cannot be used with explosive or combustive gases Inductive contact gauge -- Normally Open (NO) -- Accuracy class: 2,5 -- Adjustment by twisting of contact hood -- Contact-free contact release without wear -- Cable length 2 m, cable outlet right-hand -- Compatible with explosive or combustive gases
Contact Version
vertical Mounting CONNECTION (6 oclock)
rear mounting CONNECTION
Available with vertical or rear mounting connections (normally open)
Regulator Accessories
85
STANDARD pressure GAUGES

63
Diameter 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63
Scale
0 + 1,5 + 2,5 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 27 + 40 bar 0 + 200 + 315 bar 0 + 200 + 315 bar 0 + 0,6 bar 0 + 1,5 + 2,5 bar 0 + 4,2 + 6 bar 0 + 4,2 + 6 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 27 + 40 bar 0 + 27 + 40 bar 0 + 27 + 40 bar 0 + 200 + 315 bar 0 + 200 + 315 bar 0 + 27 + 40 bar 0 + 10 + 16 bar 0 + 0,4 bar 0 + 0,14 + 0,20 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Stainless steel Stainless steel
Connection
Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Rear Vertical Vertical
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 G 1/4 M10 x 1 1/8 NPT G 1/4 1/4 NPT
Contact
No No No No No No No No No No No No No No No No No No No No No
KIT part number

333333333756 290002990001 333333333757 On demand 290002990000 On demand On demand On demand On demand 292800990003 292822990000 290204990001 On demand On demand On demand On demand On demand On demand On demand On demand 333333334547
50 M10 x 1 male vertical for brass regulator

Diameter 50 50 50 50 50 50 50 50 50 50 50 50 50
Scale
0 + 0,1 + 0,16 bar -1 + 1 + 1,5 bar -1 + 1,5 + 2,5 bar -1 + 3 + 5 bar -1 + 4 + 6 bar -1 + 8 + 12 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 300 + 400 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1
Contact
No No No No No No No No No No No No No
KIT part number

360025990000 320000990020 360026990000 360003990002 333333334879 299121990000 299108990002 299091990001 320203990000 301200990002 300602990003 360000990007 350000990004
50 M10 x 1 male vertical for stainless steel regulator

Diameter 50 50 50 50 50 50 50 50 50 50 50 50 50
Scale
-1 + 1 + 1,5 bar -1 + 2 + 3 bar -1 + 3 + 5 bar -1 + 4 + 6 bar -1 + 6 + 9 bar -1 + 8 + 12 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 300 + 400 bar
Material
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Connection
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1
Contact
KIT part number

360031990000 333333332860 320200990004 300800990004 333333332665 360029990000 299174990002 360030990000 299108990000 333333333637 300600990012 300600990005 300600990011
86
Regulator accessories
STANDARD pressure GAUGES (continued)

50 M10 x 1 male with rear connection for brass panel
Diameter 50 50 50 50 50 50 50 50 50 50 50
Scale
0 + 0,1 + 0,16 bar -1 + 1 + 1,5 bar -1 + 1,5 + 2,5 bar -1 + 3 + 5 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 30 + 40 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 300 + 400 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1
Contact
No No No No No No No No No No No
KIT part number

On demand 333333334018 On demand 320200990006 390000990030 360015990001 299178990025 390093990001 360015990000 299178990024 299216990005
50 M10 x 1 male with rear connection for stainless steel panel

Diameter 50 50 50 50 50 50 50 50
Scale
-1 + 1 + 1,5 bar -1 + 3 + 5 bar -1 + 8 + 12 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 70 + 100 bar 0 + 200 + 315 bar
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Material
Connection
Rear Rear Rear Rear Rear Rear Rear Rear
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1
Contact
No No No No No No No No
KIT part number
On demand 333333332251 299182990003 390000990031 390000990019 299111990002 333333334599 390000990020
50 1/4 NPT male vertical for brass regulator

Diameter
50 50 50 50 50 50 50 50 50 50 50 50 50
Scale
0 + 0,10 + 0,16 bar 0 + 0,14 + 0,20 bar -1 + 1 + 1,5 bar -1 + 1,5 + 2,5 bar -1 + 3 + 5 bar -1 + 8 + 15 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 300 + 400 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Male thread
1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Contact
KIT part number

On demand On demand 320000990023 On demand 320401990000 320401990000 333333333279 333333333469 333333333513 293500990001 333333333514 360001990003 350002990001
50 1/4 NPT male vertical for stainless steel regulator

Diameter
50 50 50 50 50 50 50 50 50 50
Scale
1 + 1 + 1,5 bar -1 + 3 + 5 bar -1 + 8 + 15 bar -1 + 10 + 15 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 300 + 400 bar
Material
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Connection
Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical
Male thread
1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Contact
No No No No No No No No No No
KIT part number

333333334261 320301990000 320501990001 333333334160 330011990000 330012990000 On demand 330013990001 330013990000 On demand
87

50 1/4 NPT male vertical for brass regulator
Diameter
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Scale
0 + 1,5 + 2,5 bar 0 + 1,6 + 2,5 bar 0 + 6 + 10 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 16 + 25 bar 0 + 27 + 40 bar 0 + 27 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 240 + 315 bar 0 + 300 + 400 bar 0 + 300 + 400 bar 0 + 300 + 400 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical
Male thread
1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Contact
No No No No No No No No No No No No No No No No
KIT part number

292900990010 On demand 333333333447 292800990015 On demand On demand On demand 333333334343 On demand On demand On demand 333333334344 On demand On demand On demand 299174990008
50 M10 x 1 male with rear connection for BRASS panel

Diameter 50 50 50 50 50 50 50 50 50 50 50 50
Scale
0 + 1,5 + 2,5 bar 0 + 1,6 + 2,5 bar 0 + 4 + 6 bar 0 + 10 + 16 bar 0 + 10 + 16 bar 0 + 16 + 25 bar 0 + 30 + 40 bar 0 + 30 + 40 bar 0 + 40 + 60 bar 0 + 70 + 100 bar 0 + 200 + 315 bar 0 + 240 + 315 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear
Male thread
1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Contact
No No No No No No No No No No No No
KIT part number

On demand 299178990032 On demand On demand 299157990012 202511990002 333333332373 On demand 333333333804 299170990006 202520990028 On demand
50 1/4 female metal face seal vertical for stainless steel regulator
Diameter 50 50
Scale
-1 + 11 + 15 bar 0 + 187 + 250 bar
Material
Stainless steel Stainless steel
Connection
Vertical Vertical
Female thread
1/4 face seal 1/4 face seal
Contact
No No
KIT part number

On demand 333333333875
50 1/4 male metal face seal rear connection for stainless steel panel
Diameter Scale Material Connection Male thread Contact KIT part number
50 50 50
0 + 10 + 14 bar 0 + 16 + 25 bar 0 + 310 + 414 bar
Stainless steel Stainless steel Stainless steel
Rear Rear Rear
1/4 face seal 1/4 face seal 1/4 f ace seal
No No No
On demand On demand On demand
50 1/8 NPT male rear connection for brass panel

Diameter 50 50 50 50 50
Scale
0 + 800 psi 0 + 27 + 36 psi 0 + 440 + 580 psi 0 + 3400 + 4568 psi 0 + 200 + 315 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy
Connection
Rear Rear Rear Rear Rear
Male thread
1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT
Contact
No No No No No
KIT part number

On demand On demand 333333333499 On demand 390087990005
88

50 1/8 NPT male rear connection for stainless steel panel
Diameter 50
Scale
0 + 200 + 315 bar
Material
Stainless steel
Connection
Rear
Male thread
1/8 NPT
Contact
No
KIT part number

333333333434
40
Diameter 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Scale
0 + 240 + 315 bar 0 + 200 + 315 bar 0 + 200 + 315 bar 0 + 200 + 315 bar 0 + 300 + 400 bar 0 + 200 + 315 bar 0 + 10 + 15 bar 0 + 16 + 25 bar 0 + 200 + 315 bar 0 + 175 bar 0 + 200 + 315 bar 0 + 200 + 315 bar 0 + 240 + 315 bar 0 + 240 + 315 bar 0 + 200 + 315 bar 0 + 300 + 400 bar 0 + 300 + 400 bar -1 + 1 + 1,5 bar -1 + 1,5 + 2,5 bar -1 + 2,5 + 5 bar -1 + 3 + 5 bar -1 + 4 + 6 bar -1 + 8 + 12 bar -1 + 10 + 15 bar -1 + 1 + 1,5 bar -1 + 1,5 + 2,5 bar -1 + 2,5 + 5 bar -1 + 3 + 5 bar -1 + 4 + 6 bar -1 + 5 + 8 bar -1 + 8 + 12 bar -1 + 10 + 15 bar 1 + 12 + 16 bar 0 + 40 + 60 bar 0 + 50 + 70 bar 0 + 160 + 205 bar 0 + 200 + 315 bar 0 + 200 + 315 bar
Material
Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Connection
Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Vertical Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear
Male thread
G 1/4 G 1/8 G 1/8 G 1/8 G 1/8 M10 x 1 M10 x 1 M10 x 1 M10 x 1 1/8 NPT 1/8 NPT 1/8 NPT G 1/4 G 1/4 G 1/8 G 1/8 G 1/8 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 1/8 NPT 1/8 NPT 1/8 NPT G 1/8
Contact
No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No
KIT part number

On demand On demand On demand 333333333881 On demand 299090820903 299001990005 On demand On demand On demand On demand On demand On demand On demand On demand On demand On demand On demand On demand 333333334833 390000990032 On demand 333333333000 390000990037 On demand On demand On demand 299303990000 On demand On demand 333333333906 333333334834 333333333944 On demand 333333333145 On demand On demand On demand
36
Diameter 36 36 36
Scale
0 + 750 + 1000 psi 0 + 2250 + 3000 psi 0 + 207 + 275 bar
Material
Cuprous alloy Cuprous alloy Stainless steel
Connection
Rear Rear Rear
Male thread
1/8 NPT 1/8 NPT 1/8 NPT
Contact
No No No
KIT part number

89
contact pressure GAUGES

Normally open contact Pressure gauge, 50 M10 x 1 male vertical connection Diameter Scale Material Connection Male thread
50 50 50 0 + 16 bar 0 + 300 + 400 bar 0 + 400 bar Cuprous alloy Cuprous alloy Cuprous alloy Vertical Vertical Vertical M10 x 1 M10 x 1 M10 x 1
Inductive Inductive Sliding
Contact
KIT part number
On demand 360021990001 390000990013
Normally open contact Pressure gauge, 50 M10 x 1 male rear connection Diameter Scale Material Connection
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0 + 16 bar 0 + 40 bar 0 + 100 bar 0 + 100 bar 0 + 250 bar 0 + 250 bar 0 + 400 bar 0 + 400 bar 0 + 250 bar 0 + 16 bar 0 + 40 bar 0 + 100 bar 0 + 100 bar 0 + 250 bar 0 + 250 bar 0 + 400 bar 0 + 400 bar Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Cuprous alloy Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear
Male thread
M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1 M10 x 1
Inductive Inductive Inductive Sliding Sliding Inductive Inductive Sliding Sliding Inductive Inductive Sliding Inductive Sliding Inductive Sliding Inductive
Contact
KIT part number
390001990004 299178990028 On demand On demand 390000990011 390000990012 390003990002 On demand On demand On demand 333333334560 On demand On demand 390014990002 390014990003 On demand 333333334568
Normally open contact Pressure gauge, 50 1/4 female metal face seal vertical connection Diameter Scale Material Connection Female thread
50 50 50 50 50 -1 + 9 bar 0 + 16 bar 0 + 40 bar 0 + 100 bar 0 + 250 bar Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Vertical Vertical Vertical Vertical Vertical 1/4 face seal 1/4 face seal 1/4 face seal 1/4 face seal 1/4 face seal
Inductive Inductive Inductive Sliding Sliding
Contact
KIT part number
On demand On demand On demand On demand On demand
Normally open contact Pressure gauge, 50 M: 1/4 metal face seal rear connection Diameter Scale Material Connection Male thread
50 50 50 0 + 40 bar 0 + 250 bar 0 + 250 bar Stainless steel Stainless steel Stainless steel Rear Rear Rear 1/4 face seal 1/4 face seal 1/4 face seal
Sliding Sliding Inductive
Contact
KIT part number
90
CYLINDER CONNECTors
Connects regulators, supply boards or switch over boards to gas cylinders directly, or via a flexible hose or pigtail CYLINDER FITTINGS KEY FEATURES -- Cylinder connector according to the following standards: AFNOR, DIN, BS, CGA, NEN, UNI, FTSC 300 bar -- Other connections on demand -- Outlet connection: 16 x 1.336 - Male or 1/4 NPT - Male -- Material: chrome plated brass or stainless steel OPTIONS -- 300 bar (FTSC) version -- Raw brass version -- Mounted on flexible hose or pigtail
High pressure 200 bar or 300 bar version Chrome plated brass
or stainless steel
Cylinder Connections BS 341 Part no.

381040990000 360232990000 360137990000 360232990300 360048990000 360234990000 360138990000 360234990300 360139990000 360136990000 360014990300 381041990000
Cylinder Connections UNI 11144 Material

Chrome plated brass
Type (Inlet)
BS 3
Male outlet Thread
Part no.
300819990000 300640990300 300815990000 300639990300 300638990300 300812990000 300813990000 300811990000
Type (Inlet)
UNI 1 - 4405 UNI 2 - 4406 UNI 3 - 4407 UNI 5 - 4409 UNI 6 - 4410 UNI 8 - 4412
Material
Chrome plated brass Stainless steel Chrome plated brass Stainless steel Stainless steel Chrome plated brass Chrome plated brass Chrome plated brass
Male outlet Thread

16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336
BS 2 / BS 4 BS 6 BS 8 BS 13 BS 14
16 x 1.336 1/4 NPT 16 x 1.336 Stainless steel 1/4 NPT 16 x 1.336 Chrome plated brass 1/4 NPT 16 x 1.336 Stainless steel 1/4 NPT Stainless steel 16 x 1.336 Stainless steel 16 x 1.336 Stainless steel 16 x 1.336 Stainless steel 16 x 1.336
Others: On Demand
91
Cylinder Connections DIN477-1 Part no.

300601990000 300618990000 300615990300 300632990300 300609990000 300616990300 300602990000 300619990000 300617990300 300633990300 300603990000 300618990300 300610990000 300624990300 300600990007 300605990000 300605990001 300619990300 300606990000 300646990000 300620990300 300646990300 300607990000 300621990300 300600990000 300620990000 300604990302 300604990304
Cylinder Connections CGA -V1 Material Male outlet Thread

16 x 1.336 1/4 NPT 16 x 1.336 1/4 NPT 16 x 1.336 16 x 1.336 1/4 NPT 16 x 1.336 1/4 NPT
Type (Inlet)
din 1
Part no.
360140990000 360132990000 360147990000 381024990000 360135990000 360141990000 360133990000 360144990000 360145990000 381025990000 360134990000 299164990000 360146990000 360143990000 299165990000
Type (Inlet)
CGA 320 CGA 330 CGA 350 cga 510 cga 540 cga 580 cga 590 CGA 660
Material
Chrome plated brass Stainless Steal Stainless Steal Chrome plated brass Stainless Steal Chrome plated brass Stainless Steal Chrome plated brass Stainless Steal Chrome plated brass Stainless Steal Chrome plated brass Stainless Steal Chrome plated brass Stainless Steal
Male outlet Thread

16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336

din 5
Chrome plated brass Stainless steel Chrome plated brass
din 6
Stainless steel
din 7 din 8
din 9
din 10
Chrome plated brass 16 x 1.336 Stainless steel Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel 1/4 NPT 16 x 1.336 Chrome plated brass 1/4 NPT Stainless steel 16 x 1.336 16 x 1.336 Chrome plated brass 1/4 NPT 16 x 1.336 Stainless steel 1/4 NPT Chrome plated brass 16 x 1.336 Chrome plated brass 16 x 1.336 1/4 NPT 16 x 1.336 1/4 NPT
Others: On Demand
Cylinder Connections AFNOR NFE 29-650 Part no.

300805990000 300806990000 300800990000 300800990002 300602990302 300600990302 360062990000 360062990001 300801990000 300801990002 300603990302 300601990302 300802990000 300629990300 300803990000 300803990001 300804990000 300637990300 300636990300 360059990000 360059990001 360060990001 360061990001
Type (Inlet)
type A type B type C
Material
din 13
Male outlet Thread
Chrome plated brass 16 x 1.336 Chrome plated brass 16 x 1.336

16 x 1.336 1/4 NPT 16 x 1.336 Stainless steel 1/4 NPT Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel 16 x 1.336 Chrome plated brass 1/4 NPT 16 x 1.336 Stainless steel 1/4 NPT Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel 16 x 1.336 Stainless steel Chrome plated brass 16 x 1.336 16 x 1.336 Stainless steel 16 x 1.336 Stainless steel 16 x 1.336 Stainless steel Others: On Demand
din 14
Chrome plated brass
Stainless steel
Others: On Demand
type D
Cylinder Connections DIN477-5 (300 bar) Part no.

350000990003 300641990300 350000990002 300642990300 350000990001 300644990300 350000990000 300643990300
Type (Inlet)
DIN 5 - 54 DIN 5 - 56 DIN 5 - 57 DIN 5 - 59
Material
Chrome plated brass Stainless steel Chrome plated brass Stainless steel Chrome plated brass Stainless steel Chrome plated brass Stainless steel
Male outlet Thread

16 x 1.336 16 x 1.336 16 x 1.336 16 x 1.336
type E
type F type G type H type J type L type M type N
Others: On Demand
Cylinder Connections nen 3268 Part no.

381013990000 381012990000 381015990000 381016990000
Type (Inlet)
LU1 RU1 RU6 RI2
Material
Male outlet Thread
Chrome plated brass 16 x 1.336

Others: On Demand
92
SV 10 safety relief valve

-- Equipped with a valve opening at the set up value to evacuate the over pressure build in the process
Connectable CE marked (97/23/CE) AISI 303 or AISI 316L
KEY FEATURES -- CE marked according to the European Directive 97/23/CE. -- Compatible with all Rotarex regulators, supply boards and switch over boards. -- Setup value defined. -- Small dimensions. -- Compatible with many gases (see table). -- Delivered with a P.A flat seal for the chrome-plated brass version and a PCTFE flat seal for the AISI 316L version. -- Delivered with the user manual.
OPTIONS -- The safety relief valve must be dimensioned in such a way that the pipe pressure will under no circumstances surpass the conception pressure of pipes, even when the safety valve is venting. -- The pressure in the pipe must not exceed the calculated value even when the device is open.
SAFETY RELIEF VALVE
A: M: G 3/8, M: 1/4 NPT B: 6 mm or 1/4 H: hexagon of 17 mm on flats L1: 27 mm L2: approx. 37 mm L3: approx. 51 mm
A FEW FLOW VALUES OF THE SAFETY SV 10 AT A PRESSURE 1,25 TIMES THE TIGHtNESS PRESSURE
Tightness pressure (marked on the body) In bar Minimum flow for 1.25 x tightness pressure in m/h - N2
*Minimum flow Q = 5,2 m3/h - N2 with 3 bar inlet pressure ALL RIGHTS OF CHANGE RESERVED
2 bar *
4 bar 7.6
5 bar 9.8
9 bar 17
11 bar 21.4
12 bar 23
16 bar 30.2
22 bar 38.1
24 bar 43.4
35 bar 57.5
50 bar 77.4
62 bar 107.1
specifications
Gasket PA 6.6 (brass/AISI 303 version)
93
PCTFE (AISI 316L version)
Gas with EPDM CO2, CO, He, N2, Air, Ne, Kr, Xe, and stainless steel C2H2, NH3, H2 Gas with FPM and Ar, He, N2, H2, Air, Ne, Kr, Xe, stainless steel C4H10, CH4, Cl2, O2 Oxygen use OK Tightness pressure 2 to 62 bar
Ports (inlet) G 3/8 - Male or 1/4 NPT - Male Ports (outlet) DR 6 mm or 1/4 Body Chrome-plated brass/AISI 303
FPM NBR Gas with NBR Ar, CO, He, N2, H2, Air, Ne, Kr, and brass Xe, C4H10, CH4
Gas with NBR Ar, CO, He, N2, H2, Air, Ne, Kr, and stainless steel Xe, NH3, C4H10, CH4 Gas with EPDM Ar, CO2, CO, He, N2, H2, Air, Ne, and brass Kr, Xe, C2H2
O-ring EPDM
or AISI 316L
(29 to 900 psi)
Leak rate 10-7 mbar /s He Temperature range -20C to +65C
Seat orifice size Hexagonal 2 mm
-4F to +149F
Safety Best Practice
94
SV10 (contd)
Connectable safety relief valve - CE marked (97/23/CE)
Tightness pressure
2 bar 4 bar 5 bar
Material
Brass + SS 303 Stainless steel 316L Brass + SS 303 Stainless steel 316L Brass + SS 303 Stainless steel 316L Brass + SS 303
Inlet connection
M: G 3/8 M: G 3/8 M: G 3/8
Outlet connection (tube fitting)

DB 6mm DB 6mm DB 6mm
O-Ring
EPDM EPDM EPDM FPM
Rotarex designation
KIT \ SOUP \ SV10 \ 2 bar \ G 3/8\ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 2 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 4 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 4 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 5 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 5 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 5 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 9 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 9 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 9 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 11 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 12 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ LT \ EPDM \ DB1/4 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ LT \ NBR \ DB6 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ 316L \ EPDM \ DB1/4 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 16 bar \ G 3/8 \ 316L \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 22 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 22 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 22 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 24 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 24 bar \ 1/4 NPT \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 24 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 24 bar \ 1/4 NPT \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 24 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 35 bar\ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 35 bar \ 1/4 NPT \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 35 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 35 bar \ 1/4 NPT \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 35 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 50 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 50 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 62 bar \ G 3/8 \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 62 bar \ 1/4 NPT \ LT \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 62 bar \ 1/4 NPT \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 62 bar \ G 3/8 \ 316L \ EPDM \ DB6 KIT \ SOUP \ SV10 \ 62 bar \ G 3/8 \ 316L \ FPM \ DB6 KIT \ SOUP \ SV10 \ 320 psi \ G 3/8 \ 316L \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 320 psi \ 1/4 NPT \ 316 \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 507 psi \ G 3/8 \ 316L \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 507 psi \ 1/4 NPT \ 316 \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 725 psi \ G 3/8 \ 316L \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 725 psi \ 1/4 NPT \ 316 \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 900 psi \ G 3/8 \ 316L \ FPM \ DB1/4 KIT \ SOUP \ SV10 \ 900 psi \ 1/4 NPT \ 316 \ FPM \ DB1/4
Kit part number

380001990001 380001990301 380001990003 380001990302 380001990004 380001990303 380001990304 380001990005 380001990305 380001990306 380001990059 380001990307 380001990006 380001990007 380001990014 380001990308 380001990358 380001990309 380001990310 380001990058 380001990311 380001990313 380001990008 380001990013 380001990320 380001990319 380001990356 380001990009 380001990011 380001990314 380001990317 380001990315 380001990060 380001990369 380001990010 380001990012 380001990318 380001990357 380001990316 380001990365 380001990370 380001990366 380001990371 380001990367 380001990372 380001990368 380001990373
9 bar 11 bar 12 bar
Stainless steel 316L Brass + SS 303 Stainless steel 316L Brass + SS 303
M: G 3/8 M: G 3/8 M: G 3/8
DB 6mm DB 6mm DB 6mm DB 6mm DB 1/4 DB 6mm DB 6mm DB 1/4 DB 6mm DB 1/4 DB 6mm
EPDM FPM EPDM EPDM EPDM NBR EPDM FPM EPDM FPM
16 bar Stainless steel 316L Brass + SS 303 22 bar Stainless steel 316L Brass + SS 303 24 bar Stainless steel 316L Brass + SS 303 35 bar Stainless steel 316L 50 bar Brass + SS 303 Stainless steel 316L Brass + SS 303 62 bar Stainless steel 316L 320 psi 507 psi 725 psi 900 psi Stainless steel 316L Stainless steel 316L Stainless steel 316L Stainless steel 316L
M: G 3/8
M: G 3/8 M: G 3/8 M: 1/4 NPT M: G 3/8 M: 1/4 NPT M: G 3/8 M: G 3/8 M: 1/4 NPT M: G 3/8 M: 1/4 NPT M: G 3/8 M: G 3/8 M: G 3/8 M: 1/4 NPT M: 1/4 NPT M: G 3/8 M: G 3/8 M: 1/4 NPT M: G 3/8 M: 1/4 NPT M: G 3/8 M: 1/4 NPT M: G 3/8 M: 1/4 NPT
DB 6mm
EPDM FPM EPDM FPM
DB 6mm
DB 6mm
EPDM EPDM
DB 6mm
FPM EPDM FPM FPM FPM FPM FPM
DB 1/4" DB 1/4" DB 1/4" DB 1/4"
95
GAS CYLINDER HOLDER

Designed for the storage of one or large number of gas cylinders in an appropriate area
Can be fixed permanently Securely holds
to the wall
Allows permanent
cylinder in place
designation of appropriate cylinder storage area Delivered with a fixing belt Many cylinder holders can be used together, side by side Part number: 202500000007
Rear view
96
reference charts
Gas Compatibility
Key to Gas Compatibility: Locate your gas type in the below chart and see the gas compatibility of each standard material type. Only select materials that are compatible with your gas type.
GAS COMPATIBILITY WITH MATERIALS

GAS B or SS 316L C2H2 Ar C4H10 CO2 CO C2H6 He H2 Kr CH4 No N2 N2O O2 C3H8 SiH4 NH3 C2H4 H2S SO2 SF6 PA 6.6 PTFE PCTFE NBR FPM (VITON) EPDM
Acetylene Argon Butane Carbon dioxide Carbon monoxide Ethane Helium Hydrogen Krypton Methane Nitric Oxide Nitrogen Nitrous Oxide Oxygen Propane Silane Ammonia Ethylene Hydrogen Sulfide Sulphur Dioxide Sulphur Hexafluoride
B B B B B B B B B B SS 316L B SS 316L B B SS 316L SS 316L B SS 316L SS 316L B OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
OK OK OK OK OK OK
OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
OK OK OK
OK OK OK
Please consult - depends on proportion of NO in the mixture Please consult - depends on proportion of N2O in the mixture OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
VITON is a registered trademark of the Dupont Nemour Company Hastelloy is a registered trademark of HAYNES International Inc.
reference charts
97
conversion charts
FLOW CONVERSION
m3/h m3/h l/h foot3/min l/s cm3/s l/h foot3/min l/s cm3/s
1 1 x 10
-3
1 x 103 1 1,699 x 103 3,6 x 103 3,6
0.589 5.885 x 10
-4
0,2778 2,778 x 10
-4
277,78 0,2778 471,95 103 1
1,69 3,6 3,6 x 10-3
1 2.119 2.119 x 10-3
0,4719 1 10-3
Pressure conversion
bar bar mbar kPa MPa atm psi mbar kPa MPa atm psi
1 10-3 10-2 10 1,013 6,89 x 10-2
103 1 10 10
4
100 0,1 1 10
3
0,1 10-4 10-3 1 1,013 x 10-1 6,89 x 10-3
0,987 9,869 x 10-4 9,869 x 10-3 9,869 1 6,8 x 10-2
14.5 14.5 x 10-3 0.145 145 14.69 1
1013 68,9
101,3 6,89
temperature
C F K R
dimension
metric inches inch fractional inch decimal metric (mm)
-20 -10 0 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000
-4 14 32 50 68 86 104 122 140 158 176 194 212 392 572 752 932 1112 1292 1472 1652 1832
253 263 273 283 293 303 313 323 333 343 353 363 373 473 573 673 773 873 973 1073 1173 1273
456 474 492 510 528 546 564 582 600 618 636 654 672 852 1032 1212 1392 1572 1752 1932 2112 2292
3 6 8 10 12 14 16 18 20 22 25
0.135 0.270 0.360 0.450 0.540 0.630 0.720 0.810 0.900 0.990 1.125
1/16" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 7/16" 5/8" 3/4" 7/8" 1"
0.063 0.125 0.188 0.250 0.313 0.375 0.500 0.438 0.625 0.750 0.875 1.000
1,59 3,18 4,76 6,35 7,94 9,53 12,70 11,11 15,88 19,05 22,23 25,40
COMPLETE SOLUTIONS FROM SOURCE TO PROCESS.
A WORLD OF GAS SOLUTIONS

ROTAREX is helping engineers worldwide to get better gas results: from ultra high purity production and medical care facilities to industrial and LPG applications, as well as alternative energy vehicles, re suppression, diving, aerospace, cryogenics, laboratory, petro-chemical and welding. ROTAREX applies over 90 years of know-how and experience to custom design, develop and manufacture the high performance valves, regulators and ttings to suit your needs, all in one hand. Discover the di erence ROTAREX can make in your world.
CYLINDER VALVES EQUIPMENT FIRETEC AUTOMOTIVE LPG/SRG MEDITEC
AUSTRALIA / BRASIL / CHINA / FRANCE / INDIA / ITALY / JAPAN / LUXEMBOURG / MIDDLE EAST / RUSSIA / SINGAPORE / SPAIN / THAILAND / USA
CEODEUX
EQUIPMENT
LPG / SRG
CEODEUX MEDITEC
EQUIPMENT
AUTOMOTIVE
FIRETEC
www.rotarex.com
www.rotarex.com
Worlwide headquarters ROTAREX S.A. 24, rue de Diekirch, BP 19 L-7505 Lintgen Luxembourg Tel.: +352 32 78 32-1 Fax: +352 32 78 32-854 E-mail: [email protected]
Regional/country head quarters

North America USA
CEODEUX Inc. - Rotarex Inc. 221 Westec Drive Westmoreland Technology Park I Mt. Pleasant, Pennsylvania 15666 USA Tel.: +1 724-696-33 45 Fax: +1 724-696-33 42 E-mail: info@ rotarex-inc.rotarex.com
EUROPE FRANCE
Rotarex France s.a. 168 av. Charles de Gaulles 92522 Neuilly sur Seine France Tel.: +33 8 10 04 19 60 Fax: +33 1 70 37 53 89 E-mail: [email protected]
ASIA MIDDLE EAST

Rotarex Middle East P.O. Box 36615 JAFZA, Jebel Ali Dubai, U.A.E. Tel.: +971 (0) 2 445 3756 Fax: +971 (0) 2 445 3756 E-mail: [email protected] Rotarex India engg. pvt. ltd. Flat No. 1001, Kirti Shikhar Building, Plot No. 11, Distt. Centre, 110058 Janakpuri, - India Tel.: +91-9873467666 E-mail: [email protected] Rotarex Thailand 297, Wanglee Tower 3rd floor, Unit C, Surawong Road Suriyawong, Bangrak, Bangkok 10500 Thailand Tel.: +66 2635 71 79 E-mail: [email protected]
OCEANIA INDIA
Rotarex Australia/New Zealand 26 Calvert Parade NSW 2106 Newport Beach Australia Tel.: +61 0404 820 615 E-mail: [email protected]
AUSTRALIA
SOUTH AMERICA BRASIL

Rotarex Brazil Ltda Cond. Ind. Portal da Anhanguera Estr. Municipal Gov. Mrio Covas, S/N 13279-411 Bairro Macuco -Valinhos Sao Paulo Brazil Tel.: +55 19 3869 2503 Fax: +55 19 3869-1503 E-mail: [email protected]
ITALY
Rotarex Italia S.r.l. 46 Via Giacomo Matteotti I-25080, Ciliverghe di Mazzano (BS) Italy Tel.: +39 030 212 05 50 Fax: +39 030 212 23 62 E-mail: [email protected] Rotarex Spain 7 - 8 G2 C/ Estbanez Caldern E-28020 Madrid Spain Tel.: +34 650 908 856 E-mail: [email protected]
SPAIN
Rotarex Star 60 Yuan Zhong Road Shanghai Nanhui Industrial Zone 201300, Shanghai China Tel.: +86-21 5800 4000 Fax: +86-21 5800 3226 E-mail: [email protected] Rotarex Fareast Pte Ltd 10 Ubi Crescent Ubi Techpark, Lobby B, #01-26 408564 Singapore Tel.: +65 64 72 37 27 Fax: +65 64 72 45 28 E-mail: [email protected] Rotarex Japan Ltd Rm 302, Wacore Shinjuku 1st Building 7-7-26 Nishishinjuku, Shinjuku-ku, 160-0023, Tokyo Japan Tel.: +81 3 5348-5167 Fax: +81 3 5348-5168 E-mail: [email protected]
CHINA
Thailand
SINGAPORE
RUSSIA
Rotarex Rus Office 539 Nauchniy proezd, 6, Building 1 117246 Moscow Russia Tel.: +7 (495) 233-2624 Fax: +7 (495) 223-2624 E-mail: [email protected]
JAPAN
2012 - Rotarex S.A. Rotarex Equipment Rotarex S.A. EPR-EN-0112

Reguladores de Pressao para Gases Especiais Rotarex

Uploaded by

Copyright:

Available Formats

Reguladores de Pressao para Gases Especiais Rotarex

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Reguladores de Pressao para Gases Especiais Rotarex

Uploaded by

Copyright:

Available Formats

PRESSURE REGULATORS

Product Range Overview

SINGLE STAGE HIGH PRESSURE REGULATORs

SerieS TGD 250

DUAL STAGE HIGH PRESSURE REGULATORs

ALL RIGHTS OF CHANGE RESERVED

Product Range Overview

LOW PRESSURE REGULATORs

POINT OF USE REGULATORs

ALL RIGHTS OF CHANGE RESERVED

Product Range Overview

ACETYLENE APPLICATION REGULATORs

SerieS LABLINE 22 AD P. 058

SerieS S 225 FM

SerieS D 230 FM

ALL RIGHTS OF CHANGE RESERVED

Product Range Overview

CONSTANT FLOW REGULATORs

BACK PRESSURE REGULATORs

SV 10 safety relief valve

gas cylinder Holder

ALL RIGHTS OF CHANGE RESERVED

P. 016 P. 018 P. 020 P. 030 P. 032 P. 050 P. 052 P. 071

ALL RIGHTS OF CHANGE RESERVED

technology overview (continued)

Ergonomic hand wheel for pressure adjustment

Spring applies force on bellow

Inlet (P1) PISTON Regulator

Ergonomic hand wheel for pressure adjustment

Spring applies force on piston

Series S 250 Series S 400

ALL RIGHTS OF CHANGE RESERVED

technology overview (continued)

Diaphragm/Diaphragm Regulator Ergonomic hand wheel for pressure adjustment

2nd Stage Regulator ( diaphragm)

1st Stage Regulator preset (diaphragm)

Series D 215 Series D 235-0.1

Comparison of dual stage vs. Single stage Regulator

technology overview (continued)

2nd Stage Regulator Bellow

1st Stage Regulator preset Diaphragm

Ergonomic hand wheel for pressure adjustment

2nd Stage Regulator Bellow

Outlet safety relief valve

1st Stage Regulator preset Piston

technology overview (continued)

Ergonomic hand wheel for pressure adjustment

Spring applies force on diaphragm

P. 026 P. 028 P. 044 P. 046 P. 054

Comparison of Balanced-Valve technology vs. dual and Single stage Regulators

Balanced-Valve and Dual stage

SELECTING the right regulAtor

SiNGLe STAGe HiGH-PreSSUre reGULATOrS

SiNGLe STAGe HiGH-PreSSUre reGULATOrS

SerieS S 215 | SiNGLe STAGe HP reGULATOr

Seat seal PCTFE

or 1/4 NPT (inlet/outlet)

inlet pressure 200 bar / 300 bar

2900 psi / 4350 psi 14.5/45/116/232/508/725 psi Nm3/h (N2)

SerieS TGD 250

SerieS LABLINE 22 AD P. 058

SerieS S 225 FM

SerieS D 230 FM

SV 10 safety relief valve

gas cylinder Holder

Series S 250 Series S 400

Series D 215 Series D 235-0.1