Scribd
Upload
295 views2 pages

Introduction To ANSYS Mechanical APDL - Part II

This 2-day course teaches advanced modeling and analysis techniques in ANSYS Mechanical APDL, including array parameters, coupling and constraint equations, element coordinate systems, surface effect elements, beam modeling, submodeling, modal analysis, bonded contact analysis, and creating macro files. The course aims to help intermediate ANSYS Mechanical APDL users perform FEA on mechanical parts and fluids more effectively. Each chapter is followed by hands-on workshops and exercises to reinforce the concepts covered.

Uploaded by

Azif Ali Moothantevileyil
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
295 views2 pages

Introduction To ANSYS Mechanical APDL - Part II

This 2-day course teaches advanced modeling and analysis techniques in ANSYS Mechanical APDL, including array parameters, coupling and constraint equations, element coordinate systems, surface effect elements, beam modeling, submodeling, modal analysis, bonded contact analysis, and creating macro files. The course aims to help intermediate ANSYS Mechanical APDL users perform FEA on mechanical parts and fluids more effectively. Each chapter is followed by hands-on workshops and exercises to reinforce the concepts covered.

Uploaded by

Azif Ali Moothantevileyil
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Introduction to ANSYS Mechanical APDL - Part II

Duration: 2 Days Prerequisites A technical education and background is recommended, but an engineering degree is not required. Successful completion of the Introduction to ANSYS Mechanical APDL - Part I course.

Overview This course is for users of ANSYS Parametric Design Language (APDL) tools in ANSYS Mechanical APDL, previously available in the traditional ANSYS format. The ANSYS Workbench environment will not be discussed or covered in this course.

Course Description Designed for intermediate ANSYS Mechanical APDL users who perform FEA on mechanical parts or fluids, Introduction to ANSYS, Part II is a two-day course that teaches advanced modeling and analysis techniques - using array parameters, coupling and constraint equations, element coordinate systems and surface effect elements. In addition, beam modeling, submodeling, modal and bonded contact analyses are covered along with creating macro files. Upon completion, attendees should be able to apply the advanced modeling and analysis techniques supported by ANSYS Mechanical APDL. This training course will cover the following topics: Array Parameters Coupling & Constraint Equations Working with Elements Beam Modeling Coupled Field Analysis Submodeling Modal Analysis Introduction to Nonlinear Analysis Bonded Contact Macro Basics

Each course chapter is followed by "hands-on" workshops and exercises.

Fee: Rs 10,000/- + Applicable Taxes For more information / registration contact: Email: [email protected] Phone: +91-20-66522545 ; Fax : +91-20-66522600

You might also like