Scribd
Upload
237 views4 pages

Commands For CCNA

This document provides a list of commands for the Cisco Certified Network Associate (CCNA) exam. It includes commands for user/privileged exec mode, global configuration mode, Ethernet interfaces, serial interfaces, BRI interfaces, line/console commands, router commands, switch user/privileged mode commands, and switch global commands. The commands cover topics such as IP addressing, routing, Frame Relay, ISDN, VLANs, and more.

Uploaded by

suresh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
237 views4 pages

Commands For CCNA

This document provides a list of commands for the Cisco Certified Network Associate (CCNA) exam. It includes commands for user/privileged exec mode, global configuration mode, Ethernet interfaces, serial interfaces, BRI interfaces, line/console commands, router commands, switch user/privileged mode commands, and switch global commands. The commands cover topics such as IP addressing, routing, Frame Relay, ISDN, VLANs, and more.

Uploaded by

suresh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

COMMANDS FOR CCNA

User/Privileged Exec Commands

clear frame-relay-inarp configure terminal copy running-config startup-config copy startup-config running-config disable disconnect enable exit help ping <ip address> show cdp show cdp interface show cdp interface <all supported interfaces> show cdp neighbors show cdp neighbors <all supported interfaces> show configuration show controllers show frame-relay lmi show frame-relay map show frame-relay pvc show frame-relay route show history show interfaces show interfaces <all supported interfaces> (including bri0:1, bri0:2) show ip access-lists show ip interface show ip interface <all supported interfaces> show ip route show ipx route show ipx servers show isdn active show isdn history show isdn status show running-config show startup-config show version terminal editing terminal history terminal history size <size> terminal no editing terminal no history traceroute <ip address>

Global Configuration Commands

access-list <1-99> deny/permit <address> access-list <1-99> deny/permit <address> <wildcard mask> access-list <1-99> deny/permit host <address> banner <banner text> banner exec <banner text>

COMMANDS FOR CCNA

banner incoming <banner text> banner login <banner text> banner motd <banner text> cdp holdtime <time> cdp timer <time> cdp run dialer-list <1-10> protocol ip deny/permit enable password <password> enable secret <password> end exit help hostname <name> interface bri <number> interface ethernet <number> (with subinterfaces) interface serial <number> (with subinterfaces) ip route <address> <mask> <interface> <next hop address> ip routing ipx routing isdn switch-type <type> line console 0 line vty <number> line vty <number> <number> router rip router igrp <AS number> router eigrp <AS number> router ospf <process id>

Ethernet Interface Commands

cdp enable description <LINE> exit help ip access-group <number> in/out ip address <address> <mask> ipx network <address> ipx network <address> encapsulation <type> ipx network <address> encapsulation <type> secondary shutdown

Serial Interface Commands

cdp enable clock rate <number> description <LINE> encapsulation frame-relay encapsulation hdlc encapsulation ppp exit frame-relay interface-dlci <number> frame-relay inverse-arp

COMMANDS FOR CCNA

frame-relay map ip <address> <dlci> help ip access-group <1-99> ip address <address> <mask> ipx network <address> ipx network <address> encapsulation <type> ipx network <address> encapsulation <type> secondary shutdown

BRI Commands

description <LINE> dialer fast-idle dialer idle-timeout dialer map ip <address> <string> dialer string <string> dialer-group <number> exit help ip address <address> <mask> isdn spid1 <string> <string> isdn spid2 <string> <string> isdn switch-type <type> shutdown

Line/Console Commands

exit help login password <password>

Router Commands

network

Switch User/Privileged Mode Commands

configure configure terminal disable enable exit help ping <ip address> show cdp show cdp interface show cdp interface <ethernet/fast ethernet ports> show cdp neighbors show cdp neighbors <ethernet/fast ethernet ports> show history show interfaces

COMMANDS FOR CCNA

show interfaces <ethernet/fast ethernet ports> show ip show running-config show spanning-tree show spanning-tree <number> show version show vlan show vlan <number> show vlan-membership show vtp

Switch Global Commands

cdp holdtime <number> cdp timer <number> enable password level 15 <password> end exit help hostname <name> interface <ethernet/fastethernet port> ip address <address> <mask> ip default-gateway <address> spanning-tree <number> ... switchport access vlan <number> vlan <number> vlan <number> name <name> vtp client/server/transparent

Switch Ethernet/Fast Ethernet Commands

cdp enable description <WORD> exit help shutdown vlan-membership static <number>

You might also like