Scribd Logo
Upload

Welcome to Scribd!

  • 125 views

    NIMCO CV3000s

    Uploaded by

    Bruno Samaeian
    The document provides information on the CV 3000 directional control valve including: - It can handle flows up to 110LPM and can be assembled up to 10 sections. It is designed for open or closed center systems and can be adapted for load sensing systems. - Technical data includes maximum pressure of 350 bar, port relief valves of 350 bar, operating temperature range of -40 to 80°C, and weight between 4.7-6.2kg per section. - It includes diagrams of dimensions and examples of different circuit configurations including open center with fixed pump and pressure on demand with variable pump. - Main relief valves, port relief valves, and different types of spool controls are described including

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    NIMCO CV3000s

    Uploaded by

    Bruno Samaeian
    125 views16 pages
    The document provides information on the CV 3000 directional control valve including: - It can handle flows up to 110LPM and can be assembled up to 10 sections. It is designed for open or closed center systems and can be adapted for load sensing systems. - Technical data includes maximum pressure of 350 bar, port relief valves of 350 bar, operating temperature range of -40 to 80°C, and weight between 4.7-6.2kg per section. - It includes diagrams of dimensions and examples of different circuit configurations including open center with fixed pump and pressure on demand with variable pump. - Main relief valves, port relief valves, and different types of spool controls are described including

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on the CV 3000 directional control valve including: - It can handle flows up to 110LPM and can be assembled up to 10 sections. It is designed for open or closed center systems and can be adapted for load sensing systems. - Technical data includes maximum pressure of 350 bar, port relief valves of 350 bar, operating temperature range of -40 to 80°C, and weight between 4.7-6.2kg per section. - It includes diagrams of dimensions and examples of different circuit configurations including open center with fixed pump and pressure on demand with variable pump. - Main relief valves, port relief valves, and different types of spool controls are described including

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    125 views16 pages

    NIMCO CV3000s

    Uploaded by

    Bruno Samaeian
    The document provides information on the CV 3000 directional control valve including: - It can handle flows up to 110LPM and can be assembled up to 10 sections. It is designed for open or closed center systems and can be adapted for load sensing systems. - Technical data includes maximum pressure of 350 bar, port relief valves of 350 bar, operating temperature range of -40 to 80°C, and weight between 4.7-6.2kg per section. - It includes diagrams of dimensions and examples of different circuit configurations including open center with fixed pump and pressure on demand with variable pump. - Main relief valves, port relief valves, and different types of spool controls are described including

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16

    Contents

    Page 4 Page 5 Page 6 Page 7 Page 9 Page 10 Page 12

    General Information Technical data Performance Curves Dimensions Main Relief Valve/ Service Port Valves/Spools Spool Controls Valve Sample

    Directional Control Valve 3 Series CV 3000

    General Information

    The CV 3000 directional control valve is a sectional valve, that can be used in both open and closed center systems. It can be adapted for open center, closed center, along with load sensing systems and operated with manual, pneumatic, hydraulic or electro hydraulic controls. It is designed to handle up to 110 LPM/30 USGPM when operated as a traditional open center valve. It will handle 120LPM/32 Gpm in the inlet section and working ows of 110 LPM/30 USGpm at each section when operating with a pressure compensated inlet section. The maximum working pressure is 350 bar/5075 Psi with a maximum back pressure of 20 bar/290 Psi in the return lines and can be assembled up to 10 valve sections as one valve unit. Standard Valve Version with Fixed Pump It can be equipped with a number specially designed spools for different applications or have special spools designed for special requirements. The inlet section can be equipped with either a main relief valve or an electrical dump to tank valve or both. Pump and tank connections can be tted in the inlet on the left side of the valve and a pressure reducer valve can also be tted in the inlet when the valve is being operated electro hydraulically on/off or proportionally. The outlet section can be equipped with a H.P.C.O. (power beyond) adapter as well as equipped with a main relief valve for downstream functions. The main relief valve and all cylinder port relief valves are direct operated and with build in anti-cavitation functions. The CV 3000 offers a large number of spool controls, such as the enclosed manual hand lever mechanism, open spool ends, cable, pneumatic pilot, hydraulic pilot and electrical on/off or proportional controls (with manual override). Load Sensing on Demand with Variable Pump With a special inlet and special spools, the CV 3000 can be used as an on demand LS valve, where the pump is activated to full stroke by the activation of any one of the spools. This inlet can be equipped with main relief valve, electrical unloading valve and a pressure-reducing valve if the valve is operated with EHP as well as the pressure compensated ow control valve communicating with the open center gallery and the pumps LS line. This version can be equipped with a standard outlet.

    Directional Control Valve Series CV 3000

    Technical Data

    Max. pressure setting Main relief valve Port relief valve Tank line Flow rates Maximum pump ow Maximum ow per section Temperature range Standard seals Spool leakage at 100 bar (1450 psi) and 25 mm2/s (cSt) (117 SSU) viscosity A and B port Filtration Contamination level equal to or better then Viscosity Recommended operating viscosity range Weight Inlet section Manual section Outlet section EHP section Operating force necessary to move the spool Spring centered Detent in Detent out Port sizes A,B P, T

    bar 350 350 20 l/min. 140/120 120 C -40 to +80 cm3/min 4-8

    Psi 5075 5075 290 USGpm 37/32 32 F -40 to +176 inch3/min 0.24-0.48

    18/14 according to ISO 4406 mm2/s(cSt) 10-400 kg 4.9 4.8 4.7 6.2 N 130 230 200 BSP 1/2 or 3/4 3/4 Metric M18x1,5 M22x1,5 M22x1,5

    NAS 1638-class 10 SSU 47-1875 lbs 10.8 10.6 10.4 13.7 kp 13 23 20 SAE 3/4-16 UNF SAE8 1 1/16-12 SAE12 1 1/16-12 SAE12

    Directional Control Valve 5 Series CV 3000

    Performance Curves
    Pressure Drop PT
    Bar 40
    10 20 30 40 US gpm

    30

    440 psi

    20

    290

    10

    150

    25

    50

    75

    100

    125

    Flow L/min

    150

    Pressure Drop PT

    Bar 40

    10

    20

    30

    40 US gpm

    30

    440 psi

    20

    290

    10

    150

    25

    50

    75

    100

    125

    Flow L/min

    150

    Pressure Drop PA(B)

    Pressure Drop PA(B)

    Bar 40

    10

    20

    30

    40 US gpm

    30

    440 psi

    20

    290

    10

    150

    25
    10

    50
    20

    75

    100
    30

    125

    Flow L/min

    150

    Pressure Drop A(B)T

    Bar 40

    40 US gpm

    30

    440 psi

    20

    290

    10

    150

    25

    50

    75

    100

    125

    Flow L/min

    150

    Directional Control Valve Series CV 3000

    Dimensions
    Manual Operator

    Directional Control Valve 7 Series CV 3000

    Dimensions
    EHP + Manual Override

    Directional Control Valve Series CV 3000

    Main Relief Valve/service Port Valves/Spools

    Description Main relief valve

    Symbol

    Order code RV

    Port relief valve

    Anticav. valve

    Port Relief/Anticav. valve

    CA

    Spool type Double acting Single acting A Single acting B Double acting with oat position
    Motor

    Symbol

    Order code standard spool 1S 2SA 2SB 3S

    Remark

    In addition to our standard spools there are a wide range of specially designed spools to maximize load control at different pump ows and applications. Please contact our factory or any authorized distributor to discuss your speciv requirements.

    4S

    Directional Control Valve 9 Series CV 3000

    Spool Controls

    Code

    Type

    A-side

    B-side

    Type
    Hand lever vertical. Other length on request. Hand lever horizontal.

    Code

    S1

    Spring centered.

    S2

    10

    Detent in position 1, 2 and 3

    Standard
    11
    Spring centered. Detent in pos. 4. Spring centered. Detent in pos. 3 and 4. Spring centered. Detent in pos. 2. Hand lever vertical. Encased.

    S5

    12

    13

    14

    Spring centered. Detent in pos. 3. Spring centered. Detent in pos. 2 and 4. Spring centered. Detent in pos. 1, 2, 3 and 4.

    15

    16

    1 0

    Directional Control Valve Series CV 3000

    Spool Controls

    Code

    Type

    A-side

    B-side

    Type

    Code

    EHP

    Electrical hydraulic proportional. 12V/1.5 A 24V/0.75 A

    Electrical hydraulic proportional. 12V/1.5 A 24V/0.75 A With manual override

    EHP

    Hydraulic on/off. Pilot pressure

    Hydraulic on/off. Pilot pressure

    HP

    Hydraulic proportional. Pilot pressure

    Hydraulic proportional. Pilot pressure

    HP

    Pneumatic on/off.

    Wire control for 3-position spool.

    3W

    PP

    Pneumatic proportional.

    Wire control for 4-position spool.

    4W

    Directional Control Valve 1 1 Series CV 3000

    Valve Sample
    open Center Circuit - Fixed Pump

    7 4 5 6

    3
    1/ Pressure relief valve 2/ Solenoid valve for electrical unloading 3/ Check Valve 4/ Spool 5/ Spool Control A-side 6/ Spool Control B-side 7/ Service port valve

    1 2

    Directional Control Valve Series CV 3000

    Valve Sample
    open Center Circuit - Fixed Pump

    8 6 4 5 7 2

    1/ Pressure relief valve 2/ Solenoid valve for electrical unloading 3/ By-pass ow control spool 4/ Check Valve 5/ Spool 6/ Spool Control A-side 7/ Spool Control B-side 8/ Service port valve

    Directional Control Valve 1 3 Series CV 3000

    Valve Sample
    Pressure on Demand Circuit - Variable Pump

    9 7

    8 6

    1/ Pressure relief valve 2/ Solenoid valve for electrical unloading 3/ Constent ow control valve for LS-control 4/ Pressure reducing/ relieving valve 5/ Check Valve 6/ Spool 7/ Spool Control A-side 8/ Spool Control B-side 9/ Service port valve

    2 4 3 1

    1 4

    Directional Control Valve Series CV 3000

    You might also like