Scribd
Upload
54 views

ME 210 Mechanical Engineering Drawing & Graphics: College of Engineering Sciences

This document provides instructions for assembling housing parts in SolidWorks. It describes: 1. Opening an assembly file and dragging housing and bush parts from their part files into the assembly workspace. 2. Creating concentric and coincident mates between the bush and housing bore and faces to fully constrain the bush position. 3. Inserting an additional large bush component and mating it to the housing counterbore, leaving an additional degree of freedom remaining for both bushes.

Uploaded by

Ebrahim Hanash
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

ME 210 Mechanical Engineering Drawing & Graphics: College of Engineering Sciences

This document provides instructions for assembling housing parts in SolidWorks. It describes: 1. Opening an assembly file and dragging housing and bush parts from their part files into the assembly workspace. 2. Creating concentric and coincident mates between the bush and housing bore and faces to fully constrain the bush position. 3. Inserting an additional large bush component and mating it to the housing counterbore, leaving an additional degree of freedom remaining for both bushes.

Uploaded by

Ebrahim Hanash
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

King Fahd University of Petroleum & Minerals

College of Engineering Sciences


Mechanical Engineering Department

ME 210 Mechanical Engineering Drawing & Graphics

Module 8: Assembling Housing


Parts

Prepared by:

Muhammad Younas and John OBrien

July August, 2004

Module 8: Assembling Housing Parts


1. Open the Housing and the small bush. open an Assembly File 2. From New Horizontally. See Figures 1 & 2. and select Tile

Figure 1

8-1

Figure 2

Notice the Assembly Design Tree and the Assembly Toolbar. In Figure 3, the screen displays all three windows.

Figure 3

8-2

3. Drag the Housing icon from the top of the HOUSING FEATURE MANAGER TREE in the Housing part window, and drop it in the FEATURE MANAGER DESIGN TREE OF THE ASSEMBLY WINDOW. See Figure 4.

Figure 4

Notice the shape of the cursor as you move into the Feature Manager Design tree of the assembly. When the main part of an assembly is added this way, the part is fixed at the assembly file origin. The origin of the part coincides with the origin of the assembly origin. The part and assembly planes are aligned.

4. Drag the small bush icon from the top of its FEATURE MANAGER DESIGN TREE window, and drop it in the GRAPHICS AREA of the assembly window close to the Housing. See Figure 5.

8-3

Figure 5

Notice the cursor symbol as the small bush is dropped in the assembly graphics area. 5. Save as Housing Assembly xxx. See Figure 6

Figure 6

8-4

Notice that the file extension is now (*.sldasm) indicating an assembly file. We no longer need the part files, but it is useful to keep them open. 6. Maximise the assembly window and Zoom to Fit . See Figure 7. We must now create Mate Relations between these two parts, first to align them and then to fit them together. Click Isometric then click Mate from the Assembly Toolbar. See Figure 8.

Figure 7

8-5

Figure 8

The Mate Property Manager opens. Notice that the Entities to Mate window is active (pink,) See Figure 9. We must now select the surfaces or edges that are to be mated.

Figure 9

8-6

7. Place the cursor on the outer cylindrical surface of the small bush, and left click to select it. The surface is highlighted, the cursor flag is visible and the selected surface is added to the Entities to mate window. Now place the cursor on the small bore at the right side of the housing. See Figures 10 & 11.

Figure 10

Figure 11

Select the bore surface as before. Notice that this second surface is added to the Entities to mate window. All possible mate settings are now available.

8-7

as the mate type and ensure that closest is selected Choose Concentric as Mate Alignment. Click Preview and watch the small bore align itself with the centre of the bore. See Figure 13.

Figure 12

Click OK

to accept the mate.

8. The position of the small bush is not fully defined, as indicated by the (-) sign in the Feature Manager Design tree. We must now lock the small bush in its final position. Select Mate once again; select the flat face at the right end of the bush. Now, select the flat face at the right end of the small boss. Both of these faces are highlighted and the mate choices are available. See Figures 13 & 14.

8-8

Figure 13

Figure 14

Choose Coincident Click OK

and watch as the bush moves into its final position.

to end the command. See Figure 15.

8-9

Figure 15

Save your work!! 9. We must now place the large bush in position. From the Insert drop down menu select Component & From File. See Figure 16.

Figure 16

8-10

Drop the big bush in the graphics area of the screen. Note the cursor symbol as you do this. Now, on your own, mate the big bush to the counterbore of the Housing. When you are finished, your assembly should look similar to Figure 17.

Figure 17

Notice that both bushes still have a (-) sign in the design tree. Why should this be? Which degree of freedom is still not constrained? 10. Save your work !!

8-11

You might also like