Scribd Logo
Upload

Welcome to Scribd!

  • 614 views

    Wiley Soalan 6

    Uploaded by

    Rozita Abdullah Sani
    This document contains solutions to probability problems involving events A and B. It provides the probabilities of events occurring based on given percentages and conditions. For example, one problem determines the probability a failure is due to loose keys (23.76%) or improperly connected or poorly welded wires (7.8%). Another finds the probability all bits in an array are 1s (0.5^10), all are 0s (0.5^10), or exactly five are 1s and five are 0s (10C5 * 0.5^10).

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Wiley Soalan 6

    Uploaded by

    Rozita Abdullah Sani
    614 views3 pages
    This document contains solutions to probability problems involving events A and B. It provides the probabilities of events occurring based on given percentages and conditions. For example, one problem determines the probability a failure is due to loose keys (23.76%) or improperly connected or poorly welded wires (7.8%). Another finds the probability all bits in an array are 1s (0.5^10), all are 0s (0.5^10), or exactly five are 1s and five are 0s (10C5 * 0.5^10).

    Original Description:

    EXERCISES

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains solutions to probability problems involving events A and B. It provides the probabilities of events occurring based on given percentages and conditions. For example, one problem determines the probability a failure is due to loose keys (23.76%) or improperly connected or poorly welded wires (7.8%). Another finds the probability all bits in an array are 1s (0.5^10), all are 0s (0.5^10), or exactly five are 1s and five are 0s (10C5 * 0.5^10).

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    614 views3 pages

    Wiley Soalan 6

    Uploaded by

    Rozita Abdullah Sani
    This document contains solutions to probability problems involving events A and B. It provides the probabilities of events occurring based on given percentages and conditions. For example, one problem determines the probability a failure is due to loose keys (23.76%) or improperly connected or poorly welded wires (7.8%). Another finds the probability all bits in an array are 1s (0.5^10), all are 0s (0.5^10), or exactly five are 1s and five are 0s (10C5 * 0.5^10).

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    The passage discusses several probability problems involving events and conditional probabilities. It also discusses failures in computer keyboards and testing an array of bits.

    Examples of probability problems discussed include finding the probability of defective semiconductor chips, batches of chemical adhesives requiring reprocessing, and parts with excellent surface finish and length. The problems involve determining probabilities of events and conditional probabilities.

    The passage discusses that computer keyboard failures can be due to faulty electrical connects (12%) or mechanical defects (88%). Mechanical defects are further broken down as being due to loose keys (27%) or improper assembly (73%). Electrical connect defects are caused by defective wires (35%), improper connections (13%), or poorly welded wires (52%).

    Port Said University

    Sheet 3 Solution

    4th Year Computer Div.

    2-58. Samples of a cast aluminum part are classified on the basis of surface finish (in microinches) and length measurements. The results of 100 parts are summarized as follows:

    Let A denote the event that a sample has excellent surface finish, and let B denote the event that a sample has excellent length. Determine:

    (e) If the selected part has excellent surface finish, what is the probability that the length is excellent? (f) If the selected part has good length, what is the probability that the surface finish is excellent? Solution: a) 0.82 b) 0.90 c) 8/9 = 0.889 d) 80/82 = 0.9756 e) 80/82 = 0.9756 f) 2/10 = 0.20 2-62. A lot of 100 semiconductor chips contains 20 that are defective. Two are selected randomly, without replacement, from the lot. (a) What is the probability that the first one selected is defective? (b) What is the probability that the second one selected is defective given that the first one was defective? (c) What is the probability that both are defective? (d) How does the answer to part (b) change if chips selected were replaced prior to the next selection? Solution: a) 20/100 b) 19/99

    Port Said University


    c) (20/100)(19/99) = 0.038

    4th Year Computer Div.

    d) If the chips are replaced, the probability would be (20/100) = 0.2 2-74.In the manufacturing of a chemical adhesive, 3% of all batches have raw materials from two different lots. This occurs when holding tanks are replenished and the remaining portion of a lot is insufficient to fill the tanks. Only 5% of batches with material from a single lot require reprocessing. However, the viscosity of batches consisting of two or more lots of material is more difficult to control, and 40% of such batches require additional processing to achieve the required viscosity. Let A denote the event that a batch is formed from two different lots, and let B denote the event that a lot requires additional processing. Determine the following probabilities:

    Solution: a) P(A) = 0.03 b) P(A') = 0.97 c) P(B|A) = 0.40 d) P(B|A') = 0.05 e) f) g)

    2-78. Computer keyboard failures are due to faulty electrical connects (12%) or mechanical defects (88%). Mechanical defects are related to loose keys (27%) or improper assembly (73%). Electrical connect defects are caused by defective wires (35%), improper connections (13%), or poorly welded wires (52%). (a) Find the probability that a failure is due to loose keys. (b) Find the probability that a failure is due to improperly connected or poorly welded wires. Solution:

    Port Said University


    a) (0.88)(0.27) = 0.2376 b) (0.12)(0.13+0.52) = 0.0.078 2-86. If are they independent? Solution:

    4th Year Computer Div.

    and A and B are mutually exclusive,

    2-88. In a test of a printed circuit board using a random test pattern, an array of 10 bits is equally likely to be 0 or 1. Assume the bits are independent. (a) What is the probability that all bits are 1s? (b) What is the probability that all bits are 0s? (c) What is the probability that exactly five bits are 1s and five bits are 0s? Solution: Let Ai denote the event that the ith bit is a one. a) By independence

    b) By independence

    c) The probability of the following sequence is

    by independence. The number of sequences consisting of five

    "1"'s, and five "0"'s is

    You might also like