Network Selection Guide
Network Selection Guide
Networks
EtherNet/IP, ControlNet, DeviceNet, HART, FOUNDATION Fieldbus, Profibus PA, Serial, DH+/RIO, DH-485
Networks
Whats Inside
Topic EtherNet/IP Network ControlNet Network DeviceNet Network Process Instrumentation Networks Contents EtherNet/IP devices and infrastructure ControlNet devices and media DeviceNet devices and media HART devices FOUNDATION Fieldbus devices Profibus PA devices Data Highway Plus and Remote I/O devices DH-485 devices Serial devices Page 5 17 27 39
43
Networks Comparison
Rockwell Automation follows a strategy of using open network technology for seamless, top-floor to shop-floor integration. These open networks speak a common language and share a universal set of communication services. As a result, information can be communicated seamlessly throughout the plant, from shop floor to top floor, and to and from the Internet for e-business applications. EtherNet/IP, ControlNet, and DeviceNet networks simplify design, start-up and maintenance, reducing costs throughout your plant with common control and communication services. Each network uses topology, capacity, and design characteristics that support real-time control, device configuration, data collection, and peer interlocking. These networks are open technologies supported by ODVA and international standards organizations, and have millions of nodes installed world-wide along with hundreds of vendor products in the market.
EtherNet/IP Network Function Plant management system tie-in (material handling); configuration, data collection, and control on a single high-speed network Mainframe computers Programmable controllers Robots HMIs I/O Drives Process instruments RFID ControlNet Network Supports transmission of time critical data between PLC and I/O devices Programmable controllers I/O chassis HMIs Personal computers Drives Robots DeviceNet Network Connects low-level devices directly to plant-floor controllerswithout interfacing them through I/O modules Sensors Motor starters Drives Personal computers Push buttons Low-end HMIs Bar code readers PLC processors Valve manifolds
Data repetition Number of nodes (max) Data transfer rate Typical use
Large packets, data sent regularly No limit 10 Mbps, 100 Mbps, or 1 Gbps Plant-wide architecture High-speed applications
Medium-size packets; data transmissions are deterministic and repeatable 99 5 Mbps Redundant applications Scheduled communication
Small packets; data sent as needed 64 logical 500, 250, or 125 Kbps Supply power and connectivity to low level devices
Networks
Choose the right network: 1. Application determine the purpose and application of the network what the network does. 2. Devices determine what devices and node types you need to connect. 3. Fit determine which networks best fit the application and device requirements by considering topology, capacity, and performance. 4. Ease of Use determine which networks reduce development, commissioning, and maintenance time and costs; determine which networks improve productivity. 5. Cost of the networks that fit the application, determine which network provides the most value.
PanelView Plus
Encompass Partners
Through the Encompass program, our third-party product referencing program, you can quickly locate the products that best solve your application challenges. Use the Encompass search tool to sort and filter products from best-in-industry suppliers in your region to connect to the Rockwell Automation architecture, or to use with our products. For more information, see the Rockwell Automation Encompass Program search tool at http://www.ab.com/db/encompass/bps_ext.search.
Networks
Additional Resources
These documents and websites contain additional information concerning related Rockwell Automation products. ODVA Resources
Resource http://www.odva.org/ http://www.odva.org/default.aspx?tabid=54 Description Open DeviceNet Vendors Association (ODVA) website The CIP Advantage website CIP features and benefits How to get started Describes the required media components and how to plan for, install, verify, troubleshoot, and certify an Ethernet network. Provides an overview of the technologies used in EtherNet/IP networks and provides guidelines for deploying infrastructure devices in EtherNet/IP networks.
Ethernet Media Planning and Installation Manual, ODVA publication http://www.odva.org/Portals/0/Library/Publications_Numbered/PUB00148R0_EtherNetIP_Me dia_Planning_and_Installation_Manual.pdf Network Infrastructure for EtherNet/IP: Introduction and Considerations, ODVA publication http://www.odva.org/Portals/0/Library/Publications_Numbered/PUB00035R0_Infrastructure_ Guide.pdf
You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
EtherNet/IP Network
The EtherNet/IP network provides plant-wide network systems using open, industry-standard networking technologies. It enables real-time control and information in discrete, continuous process, batch, safety, drive, motion, and high availability applications. The EtherNet/IP network connects devices such as motor starters and sensors to controllers and HMI devices and on into the enterprise. It supports non-industrial and industrial communications on a common network infrastructure. EtherNet/IP technology is designed to be the one network with the broadest use across all plant disciplines, with the ability to handle communications from the bottom to the top. It supports the following uses: Business System / Automation IntegrationExclusively uses standard IEEE 802.3 and TCP/IP/UDP HMIOffers plenty of bandwidth to support very large, data-intensive HMI applications, with support from nearly every HMI vendor Device Programming and ConfigurationUses the Ethernet port on your personal computer Peer-to-Peer CommunicationProvides interlocking and data transfer between controllers, robots, and others I/O ControlProvides update rates below 1 ms Time Synchronization and Time StampingSub-microsecond coordination Drive ControlConfiguration, monitoring, and coordinated control Safety ControlMixes standard and safety devices on the same network Motion ControlProvides precision motion control for the most demanding coordinated-motion applications
Additional Resources
Resource Rockwell Automation EtherNet/IP Network web pages. http://ab.rockwellautomation.com/Networks-and-Communications/Ethernet-IP-Network EtherNet/IP Media Planning and Installation Manual Ethernet Design Considerations Reference Manual, publication ENET-RM002 EtherNet/IP Embedded Switch Technology Application Guide, publication ENET-AP005 EtherNet/IP Modules Installation Instructions, publication ENET-IN002 EtherNet/IP Network Configuration User Manual, publication ENET-UM001 Description EtherNet/IP connected products ODVA document with details on planning and troubleshooting EtherNet/IP media Overview of EtherNet/IP basics Installation, configuration, and maintenance of linear and Device-level Ring (DLR) networks using Rockwell Automation EtherNet/IP devices with embedded switch technology Installation and start up of EtherNet/IP module systems with Logix5000 controllers Configuration of EtherNet/IP modules system with Logix5000 controllers
To view or download these publications, go to: http://www.rockwellautomation.com/literature To obtain a hard copy, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
EtherNet/IP Network
1783-ETAP Workstation
1783-ETAP
1738-AENTR 1738 I/O Modules 1756-EN2TR 1756 I/O Modules 56RF Interface Block 56RF Transceivers 1734-AENTR 1734 I/O Modules
EtherNet/IP Network
32
EtherNet/IP Network
1762 1766
1764
EtherNet/IP Network
EtherNet/IP Network
Operator Interfaces
PanelView Plus 6 Operator Terminals - EtherNet/IP Connectivity
Cat. No. 2711P Description PanelView Plus 6 terminals, 700 color PanelView Plus 6 terminals, 1000 color PanelView Plus 6 terminals, 1250 color PanelView Plus 6 terminals, 1500 color Interface Built-in EtherNet/IP port
10
EtherNet/IP Network
Industrial Computers
Industrial Computers - EtherNet/IP Connectivity
Cat. No. 6189V-PCIENET Description 6155R compact non-display computer 6177R non-display computers 6180P integrated display computer with keypad 6181F integrated display computers with solid-state drives (SDD) 6181P integrated display computers with hard disk drives (HDD) Interface Ethernet PCI card, 10/100/1000 Mbps for additional Ethernet ports Computers come with built-in Ethernet ports
RFID Interfaces
Radio Frequency Identification Devices - EtherNet/IP Connectivity
Cat. No. 56RF-IN-IPS12 56RF-IN-IPD22 56RF-IN-IPD22A Description RFID ICODE interface, single channel with I/O, 1 input, 1 output RFID ICODE interface, dual channel with I/O, 1 input, 1 output RFID ICODE interface, dual channel with I/O, 2 inputs Interface Built-in Ethernet port
Linking Devices
Linking Devices - EtherNet/IP Connectivity
Cat. No. 1788-EN2DN 1788-EN2FFR 1788-EN2PAR Description EtherNet/IP-to-DeviceNet linking device Foundation Fieldbus linking device Ethernet/IP to Profibus PA linking device Interface Link an EtherNet/IP network to a DeviceNet network Link an EtherNet/IP network to a Foundation Fieldbus H1 network Link an EtherNet/IP network to a Profibus PA network
11
EtherNet/IP Network
I/O Platforms
In-Cabinet Distributed I/O - EtherNet/IP Connectivity
Cat. No. 1734-AENT 1734-AENTR 1791ES 1794-AENT 1794-AENTR 1794-AENTRXT Description POINT I/O POINT Guard I/O CompactBlock Guard I/O FLEX I/O FLEX Ex I/O Interface EtherNet/IP I/O adapter EtherNet/IP dual-port I/O adapter EtherNet/IP options EtherNet/IP I/O adapter EtherNet/IP dual-port I/O adapter EtherNet/IP dual-port I/O adapter, extreme environment
12
EtherNet/IP Network
Drives
PowerFlex 4-Class Drives - EtherNet/IP Connectivity
Cat. No. 22B 22C 22-COMM-E Description PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 4 AC drives PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 40P AC drives PowerFlex 4M AC drives Ethernet/IP adapter module Interface Built-in EtherNet/IP options
13
EtherNet/IP Network
Motion Control
Kinetix Servo Drives - EtherNet/IP Connectivity
Cat. No. 2097-V3xPRx 2097-V3xPRx-LM 2094-EN02D-M01-Sx Description Kinetix 300 servo drives Kinetix 350 servo drives Kinetix 6500 servo drives Interface Built-in EtherNet/IP port Built-in EtherNet/IP port Built-in EtherNet/IP port
14
EtherNet/IP Network
Power Management
Power Monitors - EtherNet/IP Connectivity
Cat. No. 1404-M405x-ENT 1404-M505x-ENT 1404-M605x-ENT 1404-M805x-ENT 1408-TR1A-ENT 1408-TR2A-ENT 1408-EM1A-ENT 1408-EM2A-ENT 1420-V1-ENT 1420-V1P-ENT 1420-V1A-ENT 1420-V2-ENT 1420-V2P-ENT 1420-V2A-ENT 1426-M5E-ENT 1426-M6E-ENT 1426-M8E-ENT 1426-COMM-ENT Ethernet accessory PowerMonitor 5000 Ethernet/IP power quality meter PowerMonitor 500 EtherNet/IP power meter EtherNet/IP energy monitor PowerMonitor 1000 EtherNet/IP transducer Description PowerMonitor 3000 Interface Ethernet/IP adapter
Industrial Controls
Vision Sensors - EtherNet/IP Connectivity
Cat. No. 48MS Description MultiSight photoelectric vision sensors Interface Ethernet options
15
EtherNet/IP Network
Motor Controls
Motor Controls - EtherNet/IP Connectivity
Cat. No. 150 152 153 193-ETN 280 281 283 284 290E 291E 294E 2100 2500 Description SMC smart motor controller SMC Dialog Plus smart motor controller with fusible disconnect SMC Dialog Plus smart motor controller with circuit breaker E1 Plus overload relay ArmorStart full voltage starter ArmorStart full voltage reversing starter ArmorStart soft starter ArmorStart drive ArmorStart LT full voltage motor controller ArmorStart LT full voltage reversing motor controller ArmorStart LT variable frequency drive motor controller NEMA CENTERLINE 2100 motor control centers (MCCs) CENTERLINE 2500 motor control centers (MCCs) Interface DPI port for connectivity to 20-COMM-E EtherNet/IP adapter module 1203-EN1 ControlNet adapter module 1203-EN1 ControlNet adapter module Built-in EtherNet/IP adapter with web server support EtherNet/IP embedded switch technology EtherNet/IP embedded switch technology EtherNet/IP communication via ArmorPOINT I/O EtherNet/IP communication via ArmorPOINT I/O Dual-port EtherNet/IP communication Dual-port EtherNet/IP communication Dual-port EtherNet/IP communication Built-in EtherNet/IP adapter via IntelliCENTER Technology Built-in EtherNet/IP adapter via IntelliCENTER Technology
16
EtherNet/IP Network
Infrastructure
Switches - EtherNet/IP Connectivity
Cat. No. 1783-ETAP 1783-ETAP1F 1783-ETAP2F 1783-RMS06T 1783-RMS10T 1783-MX08T 1783-MX08F 1783-MS06T 1783-MS10T 1783-MX08T 1783-MX08F 1783-EMS04T 1783-EMS08T 1783-US03T01F 1783-US05T 1783-US06T01F 1783-US08T Stratix 2000 switches, unmanaged Stratix 6000 switches, fixed managed Stratix 8000 switches, modular managed Stratix 8300 switches, modular managed Description Embedded switch technology Interface EtherNet/IP tap, 3 copper ports EtherNet/IP tap, 2 copper ports, 1 fiber port EtherNet/IP tap, 1 copper port, 2 fiber ports 6 copper ports (includes 2 dual-purpose ports with SFP slots), Layer 3 switch 10 copper ports (includes 2 dual-purpose ports with SFP slots), Layer 3 switch Expansion module, 8 copper ports Expansion module, 8 fiber ports 6 copper ports (includes 2 dual-purpose ports with SFP slots), Layer 2 switch 10 copper ports (includes 2 dual-purpose ports with SFP slots), Layer 2 switch Expansion module, 8 copper ports Expansion module, 8 fiber ports 4 copper ports 8 copper ports, 1 fiber SFP slot 3 copper ports, 1 fiber port 5 copper ports 6 copper ports, 1 fiber port 8 copper ports
17
EtherNet/IP Network
Notes:
18
ControlNet Network
The ControlNet network is an open control network that meets the demands of real-time, high-throughput applications. ControlNet supports controller-to-controller interlocking and real-time control of I/O, drives, and valves. It also provides control networking in discrete and process applications including high-availability applications. ControlNet is especially suited for these types of applications: Network option for ControlLogix platform Replacement for the Remote I/O (RIO) network Backbone to multiple distributed DeviceNet networks Controller-to-controller (peer-to-peer) messaging and interlocking Data collection High-speed I/O network Device configuration
Additional Resources
Resource Rockwell Automation EtherNet/IP Network web pages. http://ab.rockwellautomation.com/Networks-and-Communications/ControlNet-Network ControlNet Fiber Media Planning and Installation Guide, publication CNET-IN001 ControlNet Coax Media Planning and Installation Guide, publication CNET-IN002 ControlNet Ex Media Planning Installation Manual, publication CNET-IN003 ControlNet Modules Installation Instructions, publication CNET-IN005 ControlNet Network Configuration User Manual, publication CNET-UM001 Description ControlNet connected products Information for ControlNet fiber cable planning and installation Information for ControlNet coax cable planning and installation Information for ControlNet Ex media planning and installation Installation and start up of ControlNet module systems with Logix5000 controllers Configuration of ControlNet modules system with Logix5000 controllers
To view or download these publications, go to: http://www.rockwellautomation.com/literature To obtain a hard copy, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
17
ControlNet Network
18
ControlNet Network
19
ControlNet Network
20
ControlNet Network
Operator Interfaces
PanelView Plus 6 Operator Terminals - ControlNet Connectivity
Cat. No. 2711P Description PanelView Plus 6 terminals, 700 color PanelView Plus 6 terminals, 1000 color PanelView Plus 6 terminals, 1250 color PanelView Plus 6 terminals, 1500 color Interface 2711P-RN15S ControlNet communication module 2711P-RN15SK ControlNet communication module, conformally coated
Computer Interfaces
Computer Interface Cards - ControlNet Connectivity
Cat. No. 1784-U2CN 1784-PCIC 1784-PCICS 1770-KFC15 1747-KFC15 Description USB to ControlNet connection ControlNet communication interface, redundant media ControlNet communication interface ControlNet interface for PLC-5 processors ControlNet interface for SLC 500 processors ControlNet to RS-232 interface module Interface USB to ControlNet cable ControlNet PCI I/O scanner card
21
ControlNet Network
Linking Devices
Linking Devices - ControlNet Connectivity
Cat. No. 1788-CN2DN 1788-CN2FFR 1788-CN2PAR Description ControlNet-to-Devicenet linking device Foundation Fieldbus linking device ControlNet to Profibus PA linking device Interface Link a ControlNet network to a DeviceNet network HIPROM Technologies, link a ControlNet network to a Foundation Fieldbus H1 network Link an ControlNet network to a Profibus PA network
I/O Platforms
In-Cabinet Distributed I/O - ControlNet Connectivity
Cat. No. 1734-ACNR 1794-ACN15 1794-ACNR15 1794-ACN15K 1794-ACNR15XT Description POINT I/O FLEX I/O FLEX Ex I/O Interface ControlNet I/O communication module, redundant media ControlNet I/O scanner ControlNet I/O scanner, redundant media ControlNet I/O scanner, conformally coated ControlNet I/O scanner, redundant media, extreme environment
22
ControlNet Network
Drives
PowerFlex 4-Class Drives - ControlNet Connectivity
Cat. No. 22B 22C 22-COMM-C Description PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 4 AC drives PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 40P AC drives PowerFlex 4M AC drives ControlNet adapter module Interface Built-in ControlNet options
23
ControlNet Network
Power Management
Power Monitors - ControlNet Connectivity
Cat. No. 1404-M405x-CNT 1404-M505x-CNT 1404-M605x-CNT 1404-M805x-CNT 1407-CGM 1426-M5E-CNT 1426-M6E-CNT 1426-M8E-CNT 1426-COMM-CNT ControlNet accessory Combination generator control module PowerMonitor 5000 Built-in ControlNet adapter ControlNet power quality meter Description PowerMonitor 3000 Interface Built-in ControlNet adapter
Motor Controls
Motor Controls - ControlNet Connectivity
Cat. No. 150 152 153 Description SMC smart motor controller SMC Dialog Plus smart motor controller with fusible disconnect SMC Dialog Plus smart motor controller with circuit breaker Interface DPI port for connectivity to 20-COMM-C ControlNet adapter module 1203-CN1 ControlNet adapter module 1203-CN1 ControlNet adapter module
24
ControlNet Network
Physical Media
Media - ControlNet Connectivity
Cat. No. 1786 Description ControlNet coax media Interface ControlNet RG-6 quad-shield coaxial cable ControlNet coaxial connectors ControlNet coaxial tap kits ControlNet coaxial media toolkit ControlNet IP67 TNC media 1786 1797 ControlNet fiber media ControlNet FLEX Ex components for hazardous locations ControlNet fiber-optic cable with V-pin connectors ControlNet intrinsically safe tap kits ControlNet intrinsically safe connectors ControlNet intrinsically safe accessories ControlNet coaxial barrier 1786 1797 1786 1797 ControlNet repeater modules ControlNet FLEX Ex repeater ControlNet repeaters ControlNet FLEX Ex repeaters ControlNet coax and fiber options ControlNet intrinsically safe repeaters ControlNet modules and adapters, coax and fiber o ControlNet intrinsically safe modules and adapters
25
ControlNet Network
Notes:
26
DeviceNet Network
The DeviceNet network provides open, device-level control and information networking for simple industrial devices. It supports communication between sensors and actuators and higher-level devices such as programmable controllers and computers. With power and signal in a single cable, it offers simple and cost-effective wiring options. DeviceNet technology is suited for these types of applications: Controlling low-density I/O Configuring devices Motor Control Centers (MCCs) Safety control
Additional Resources
Resource Rockwell Automation DeviceNet Network web pages. http://ab.rockwellautomation.com/Networks-and-Communications/DeviceNet-Network DeviceNet Media Design and Installation Guide, publication DNET-UM072 DeviceNet Modules Installation Instructions, publication DNET-IN001 Devicenet Network Configuration User Manual, publication DNET-UM004 Description DeviceNet connected products Details on planning and troubleshooting DeviceNet media Installation and start up of DeviceNet module systems with Logix5000 controllers Configuration of DeviceNet modules system with Logix5000 controllers
To view or download these publications, go to: http://www.rockwellautomation.com/literature To obtain a hard copy, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
1784-U2DN Interface
E3 Overload Relay
27
DeviceNet Network
28
DeviceNet Network
29
DeviceNet Network
Computer Interfaces
Computer Interface Cards - DeviceNet Connectivity
Cat. No. 1784-U2DN 1784-PCIDS 1770-KFD 1770-KFDG Description USB to DeviceNet connection PCI card with a DeviceNet port Connectivity to computer RS-232 port, making it a DeviceNet node Interface USB to DeviceNet cable DeviceNet PCI I/O scanner card DeviceNet RS-232 PC interface DeviceNet RS-232 PC interface with power supply adapter
30
DeviceNet Network
Linking Devices
Linking Devices - DeviceNet Connectivity
Cat. No. 1788-CN2DN 1788-EN2DN Description ControlNet-to-Devicenet linking device EtherNet/IP-to-DeviceNet Linking Device Interface Link a ControlNet network to a DeviceNet network Link an EtherNet/IP network to a DeviceNet network
I/O Platforms
In-Cabinet Distributed I/O - DeviceNet Connectivity
Cat. No. 1734 1734-PDN 1734-ADN 1734-ADNX 1791D 1791DS 1794-ADN CompactBlock I/O CompactBlock Guard I/O FLEX I/O FLEX Ex I/O Description POINT I/O POINT Guard I/O POINT I/O Interface Modules with DeviceLogix Smart Component Technology DeviceNet I/O communication module DeviceNet I/O adapter DeviceNet I/O adapter with expansion port Modules with DeviceLogix Smart Component Technology Modules with DeviceLogix Smart Component Technology DeviceNet I/O adapter DeviceNet I/O adapter in conjunction with 1797-BIC and 1797-CEC
31
DeviceNet Network
32
DeviceNet Network
1440-REX00-04RD
1440-REX03-04RG
33
DeviceNet Network
Power Supplies
Power Supplies - DeviceNet Connectivity
Cat. No. 1606-XL 1606-XLP 1606-XLS 1609-U 1497 Uninterruptible power supplies Transformers Description Switched mode power supplies Interface Standard power supplies, single- and three-phase Compact power supplies, single- and two-phase Performance power supplies, single- and three-phase DIN rail mounted Control circuit transformer s
Drives
PowerFlex 4-Class Drives - DeviceNet Connectivity
Cat. No. 22B 22C 22-COMM-D Description PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 4 AC drives PowerFlex 40 AC drives PowerFlex 400 AC drives PowerFlex 40P AC drives PowerFlex 4M AC drives DeviceNet adapter module Interface Built-in DeviceNet options
34
DeviceNet Network
Power Management
Power Monitors - DeviceNet Connectivity
Cat. No. 1404-M405x-DNT 1404-M505x-DNT 1404-M605x-DNT 1404-M805x-DNT 1426-M5E-DNT 1426-M6E-DNT 1426-M8E-DNT 1426-COMM-DNT DeviceNet accessory PowerMonitor 5000 DeviceNet power quality meter Description PowerMonitor 3000 Interface Built-in DeviceNet adapter
Industrial Controls
Pushbuttons and Signals - DeviceNet Connectivity
Cat. No. 800F 800F 800T 855T Description Pushbutton stations with DeviceLogix Smart Component Technology Pendant stations with pushbuttons DeviceLogix assembled stations Control tower stack lights Interface Rugged, industrially proven pushbutton station DeviceNet control enclosure with 24V AC/DC mini quick change Enabled with DeviceLogix Smart Component Technology Enhance safety visibly and audibly
35
DeviceNet Network
Motor Controls
Motor Controls - DeviceNet Connectivity
Cat. No. 100 150 152 153 193-DTN 280 281 283 284 592 825-P Description DeviceNet starter auxiliary module SMC smart motor controller SMC Dialog Plus smart motor controller with fusible disconnect SMC Dialog Plus smart motor controller with circuit breaker E1 Plus overload relay ArmorStart full voltage starter ArmorStart full voltage reversing starter ArmorStart soft starter ArmorStart drive NEMA E1 Plus electronic overload relay Modular protection system Interface DeviceLogix Smart Component technology DPI port for connectivity to 20-COMM-D DeviceNet adapter module 1203-GU6 enhanced DeviceNet adapter module 1203-GU6 enhanced DeviceNet adapter module Built-in DeviceNet adapter Enabled with DeviceLogix Smart Component Technology Enabled with DeviceLogix Smart Component Technology Enabled with DeviceLogix Smart Component Technology Enabled with DeviceLogix Smart Component Technology Self-powered Phase-loss protection Pass through EtherNet/IP explicit messages and I/O for up to six DeviceNet-based devices Options with DeviceLogix Smart Component Technology Built-in DeviceNet adapter IntelliCENTER technology Built-in DeviceNet adapter IntelliCENTER technology Built-in DeviceNet adapter IntelliCENTER technology Motor control center and power control center options for full voltage and solid-state reduced voltage applications while supporting
CENTERLINE 1500 Motor Control Centers (MCCs) NEMA CENTERLINE 2100 Motor Control Centers (MCCs) CENTERLINE 2500 Motor Control Centers (MCCs) IEC OneGear Soft starters
36
DeviceNet Network
Physical Media
For more information, see the On-Machine Connectivity Catalog, publication M116-CA001. Media - DeviceNet Connectivity
Cat. No. 871 888/889 898 1485 Description Round media Interface Terminal chambers (field attachable connectors) Auxiliary power patchcords, cordsets, receptacles, and bulkhead passthrus Auxiliary power T-port products Cable spools Molded patchcords, cordsets, receptacles, and bulkhead passthrus Terminators T-port products PowerTap products DeviceBox products 1485 Flat media General purpose flat media KwikLink lite media Heavy duty flat media
37
DeviceNet Network
Notes:
38
HART
FOUNDATION Fieldbus
Profibus PA
Some field devices support a direct connection to EtherNet/IP networks. For more information, see the EtherNet/IP-enable, Promag and Promass devices available from Endress + Hauser at http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/Ethernet.
Additional Resources
Resource Rockwell Automation Process Instrumentation Networks web pages. http://ab.rockwellautomation.com/Networks-and-Communications/Process PlantPAx Process Automation System Selection Guide, publication PROCES-SG001 Description Connected products for process instrumentation networks Process products
To view or download these publications, go to: http://www.rockwellautomation.com/literature To obtain a hard copy, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
39
HART Interfaces
HART is an open protocol designed to connect analog devices. In-Cabinet Distributed I/O - HART Connectivity
Cat. No. 1734sc-IE2CH, 1734sc-IE4CH 1794-IE8H, 1794-OE8H 1794-IF8IH, 1794-OF8IH 1797-IE8H, 1797-OE8H FLEX Ex I/O Description POINT I/O FLEX I/O Interface Spectrum Controls, analog input module FLEX analog I/O analog I/O modules with the following: Standard profiles in RSLogix 5000 software DTMs FLEX Ex analog I/O modules with the following: Standard profiles in RSLogix 5000 software DTMs
HART device integration tools include the following: Pre-engineered controller code with Add-On Instructions that provide two-way exchange of data between faceplates and the ControlLogix controller Pre-configured operator faceplates that provide visualization of instruments connected to the network interface Integration documentation that describes the implementation, at http://www.rockwellautomation.com/solutions/process/integrationdocs.html
40
FOUNDATION Fieldbus device integration tools include the following: Pre-engineered controller code with Add-On Instructions that provide two-way exchange of data between faceplates and the ControlLogix controller Pre-configured operator faceplates that provide visualization of instruments connected to the network interface Integration documentation that describes the implementation, at http://www.rockwellautomation.com/solutions/process/integrationdocs.html
41
Profibus PA Interfaces
The Profibus PA network is the Profibus solution for process automation. The Profibus PA network connects automation systems and process control systems with field devices such as flow, level, pressure, and temperature transmitters. Linking Devices - Profibus PA Connectivity
Cat. No. 1788-EN2PAR 1788-CN2PAR 1788-FBJB6 1788-FBJB4R Description PROFIBUS PA linking device PROFIBUS PA linking device Junction box 6-way Redundant junction box 4-way Interface HIPROM Technologies, EtherNet/IP to Profibus PA linking device HIPROM Technologies, ControlNet to Profibus PA linking device Junction boxes
Profibus PA device integration tools include the following: Pre-engineered controller code with Add-On Instructions that provide two-way exchange of data between faceplates and ControlLogix controller Pre-configured operator faceplates that provide visualization of instruments connected to the network interface Integration documentation that describes the implementation, at http://www.rockwellautomation.com/solutions/process/integrationdocs.html
42
Additional Resources
Resource Rockwell Automation Other Industrial Networks web pages. http://ab.rockwellautomation.com/Networks-and-Communications/Other-Industrial-Networks Description Connected products for other industrial networks
To view or download these publications, go to: http://www.rockwellautomation.com/literature To obtain a hard copy, contact your Allen-Bradley distributor or Rockwell Automation sales representative.
43
Computer Interfaces
Computer Interface Cards - DH+ and RIO Connectivity
Cat. No. 1784-PKTX 1784-PKTXD 1784-U2DHP USB to Data Highway Plus cable Description DH+ and RIO communication card Interface DH+ and RIO interface, 1 port DH+ and RIO interface, 2 ports USB to DH+ cable
44
Converter Devices
Converter Devices - DH+ and RIO Connectivity
Cat. No. 1771-AF 1771-AF1 Description Fiber-optic converter module Fiber optic converter module, stand-alone) Interface Allows DH+ and RIO signals to travel over fiber-optic cable for routing through electrically noisy environments
I/O Platforms
Chassis-Based Distributed I/O - DH+ and RIO Connectivity
Cat. No. 1756-DHRIO 1756-RIO 1747-ASB 1747-SN 1771-ASB PLC-5 I/O SLC I/O Description ControlLogix I/O Interface DH+/RIO communication module RIO communication module Universal Remote I/O adapter module Universal Remote I/O scanner module Universal Remote I/O adapter module
45
DH-485 Networks
The DH-485 industrial local area network is designed for factory-floor applications and uses the RS-485 transmission standard.
Computer Interfaces
Computer Interface Cards - DH+ and RIO Connectivity
Cat. No. 1784-PKTX 1784-PKTXD 1747-UIC USB to DH-485 converter Description DH-485 communication card Interface DH-485 interface, 1 port DH-485 interface, 2 ports USB to DH-485 converter module, 2 ports
46
I/O Platforms
Chassis-Based Distributed I/O - DH+ and RIO Connectivity
Cat. No. 1756-DH485 1761-NET-AIC 1747-KE 1747-AIC Description ControlLogix I/O MicroLogix I/O SLC I/O Interface DH-485 communication module Advanced interface converter RS-232-C / DH-485 interface module Isolated link coupler
47
Serial Networks
The serial interface modules support serial communication to peripheral products with RS-232, RS-485, or RS-422 ports. These modules let a device with serial output (such as bar code readers) to communicate with devices on industrial networks.
Modbus Support
To access a Modbus TCP network, connect through the embedded Ethernet port of a Logix controller and execute a specific ladder-logic routine. For more information, see Knowledgebase document 470365 at http://www.rockwellautomation.com/knowledgebase/. To access a Modbus RTU network, connect through the serial port (if available) of a Logix controller and execute a specific ladder-logic routine. For more information, see Using Logix5000 Controllers as Masters or Slaves on Modbus Application Solution, publication CIG-AP129.
I/O Platforms
In-Cabinet Distributed I/O - Serial Connectivity
Cat. No. 1734-232ASC 1734-485ASC Description POINT I/O Interface Serial communication interface solution for peripheral products with RS-232 ports Serial communication interface solution for peripheral products with RS-485 or RS-422 ports
48
Allen-Bradley, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.