JunosE Software for E Series Broadband Services Routers

System Event Logging Reference Guide

Release

12.1.x

Published: 2011-03-24

Copyright 2011, Juniper Networks, Inc.

Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

JunosE Software for E Series Broadband Services Routers System Event Logging Reference Guide Release 12.1.x Copyright 2011, Juniper Networks, Inc. All rights reserved. Revision History April 2011FRS JunosE 12.1.x The information in this document is current as of the date listed in the revision history. YEAR 2000 NOTICE Juniper Networks hardware and software products are Year 2000 compliant. The Junos OS has no known time-related limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

ii

Copyright 2011, Juniper Networks, Inc.

END USER LICENSE AGREEMENT

READ THIS END USER LICENSE AGREEMENT (AGREEMENT) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customers principal office is located in the Americas) or Juniper Networks (Cayman) Limited (if the Customers principal office is located outside the Americas) (such applicable entity being referred to herein as Juniper), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (Customer) (collectively, the Parties). 2. The Software. In this Agreement, Software means the program modules and features of the Juniper or Juniper-supplied software, for which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by Juniper in equipment which Customer purchased from Juniper or an authorized Juniper reseller. Software also includes updates, upgrades and new releases of such software. Embedded Software means Software which Juniper has embedded in or loaded onto the Juniper equipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto the equipment. 3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions: a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from Juniper or an authorized Juniper reseller. b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall use such Software on a single computer containing a single physical random access memory space and containing any number of processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines (e.g., Solaris zones) requires multiple licenses, regardless of whether such computers or virtualizations are physically contained on a single chassis. c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specify limits to Customers use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent users, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of separate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the Software to be used only in conjunction with other specific Software. Customers use of the Software shall be subject to all such limitations and purchase of all applicable licenses. d. For any trial copy of the Software, Customers right to use the Software expires 30 days after download, installation or use of the Software. Customer may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional trial period by re-installing the Software after the 30-day trial period. e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customers enterprise network. Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support any commercial network access services. The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable license(s) for the Software from Juniper or an authorized Juniper reseller. 4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove any proprietary notices, labels, or marks on or in any copy of the Software or any product in which the Software is embedded; (e) distribute any copy of the Software to any third party, including as may be embedded in Juniper equipment sold in the secondhand market; (f) use any locked or key-restricted feature, function, service, application, operation, or capability without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, service, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper to any third party; (h) use the

Copyright 2011, Juniper Networks, Inc.

iii

Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller; (i) use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that the Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein. 5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall furnish such records to Juniper and certify its compliance with this Agreement. 6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Customer shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes restricting access to the Software to Customer employees and contractors having a need to use the Software for Customers internal business purposes. 7. Ownership. Juniper and Junipers licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software, associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software. 8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statement that accompanies the Software (the Warranty Statement). Nothing in this Agreement shall give rise to any obligation to support the Software. Support services may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW, JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES JUNIPER WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Junipers or its suppliers or licensors liability to Customer, whether in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave rise to the claim, or if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges and agrees that Juniper has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss), and that the same form an essential basis of the bargain between the Parties. 9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the license granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in Customers possession or control. 10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from the purchase of the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction shall be provided to Juniper prior to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All payments made by Customer shall be net of any applicable withholding tax. Customer will provide reasonable assistance to Juniper in connection with such withholding taxes by promptly: providing Juniper with valid tax receipts and other required documentation showing Customers payment of any withholding taxes; completing appropriate applications that would reduce the amount of withholding tax to be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder. Customer shall comply with all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related to any liability incurred by Juniper as a result of Customers non-compliance or delay with its responsibilities herein. Customers obligations under this Section shall survive termination or expiration of this Agreement. 11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or without all necessary approvals. Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption or other capabilities restricting Customers ability to export the Software without an export license.

iv

Copyright 2011, Juniper Networks, Inc.

12. Commercial Computer Software. The Software is commercial computer software and is provided with restricted rights. Use, duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable. 13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer with the interface information needed to achieve interoperability between the Software and another independently created program, on payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with any applicable terms and conditions upon which Juniper makes such information available. 14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License (GPL) or the GNU Library General Public License (LGPL)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of the LGPL at http://www.gnu.org/licenses/lgpl.html . 15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the Parties agree that the English version will govern. (For Canada: Les parties aux prsents confirment leur volont que cette convention de mme que tous les documents y compris tout avis qui s'y rattach, soient redigs en langue anglaise. (Translation: The parties confirm that this Agreement and all related documentation is and will be in the English language)).

Copyright 2011, Juniper Networks, Inc.

vi

Copyright 2011, Juniper Networks, Inc.

Abbreviated Table of Contents

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

Part 1
Chapter 1 Chapter 2

Chapters
System Logging Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Event Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Part 2
Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Chapter 17 Chapter 18 Chapter 19 Chapter 20 Chapter 21

Event Categories
A Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 B Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 C Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 D Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 E Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 F Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 G and H Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 I Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 L Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 M Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 N Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 O Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 P Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Q Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 R Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 S Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 T Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 U Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 V Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

Part 3

Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

Copyright 2011, Juniper Networks, Inc.

vii

JunosE 12.1.x System Event Logging Reference Guide

viii

Copyright 2011, Juniper Networks, Inc.

Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
E Series and JunosE Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . xxi Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi E Series and JunosE Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . xxi Obtaining Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv

Part 1
Chapter 1

Chapters
System Logging Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview of System Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Log Severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Log Verbosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Persistent Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Logging Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Configuring Event Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuring Log Severity for Individual and Systemwide Logs . . . . . . . . . . . . . . . . 10 Configuring Log Verbosity for Individual Logs or All Logs . . . . . . . . . . . . . . . . . . . . 14 Setting the Timestamp for Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Configuring Log Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turning Off Log Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Monitoring Logging System Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 2

Event Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Part 2
Chapter 3

Event Categories
A Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
aaaAtm1483Cfg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 aaaEngineGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 aaaQosCfg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 aaaServerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 aaaUserAccess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 addressServerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ar1AaaServerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 atm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 atm1483 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 atm1483VcClass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 atmAal5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Copyright 2011, Juniper Networks, Inc.

ix

JunosE 12.1.x System Event Logging Reference Guide

atmVcClass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 auditIpsec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 4

B Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
bfdAdaptivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 bfdEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 bfdGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 bfdSession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 bgpConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 bgpDampening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 bgpEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 bgpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 bgpGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 bgpIpv6NextHops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 bgpKeepAlives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 bgpMessages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 bgpNeighborChanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 bgpNextHops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 bgpRoutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 bridgeEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 bridgingMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 bulkStats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Chapter 5

C Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
cacGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 cacIntf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 cliCommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 cliGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 connectionManager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 cops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 copsPr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 coreDump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 ctreeLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Chapter 6

D Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
dcm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 dcmEngineGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 debounceEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 debounceGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 dhcpCapture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 dhcpExternal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 dhcpExternalEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 dhcpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 dhcpIssuLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dhcpLocalClients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dhcpLocalGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 dhcpLocalHighAvailability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 dhcpLocalPool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 dhcpLocalProtocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Copyright 2011, Juniper Networks, Inc.

Table of Contents

dhcpOfferLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 dhcpPbeGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 dhcpProxyGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 dhcpRelayGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dhcpRelayNvWriterGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dhcpv6Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 dhcpv6DemuxGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 dhcpv6LsGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 dismanEventMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 dnsGeneralLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 dosProtection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 ds1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 ds3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 dvmrpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 dvmrpGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 dvmrpMcastTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 dvmrpProbeRcv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 dvmrpProbeSent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 dvmrpRtTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Chapter 7

E Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 ethernetStateSession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chapter 8

F Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
fileSystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 flowInspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 flowInspectionEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 flowServicesFirewallAlert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 flowServicesFirewallAudit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 frameRelay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 fsAgent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ft1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 ftpClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 ftpServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chapter 9

G and H Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
gplaan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 ha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 hdlc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 hotfixGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 httpServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 10

I Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
icImageFixServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 icmpTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 icmpv6Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 icrPartitionManager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 igmpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 igmpGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Copyright 2011, Juniper Networks, Inc.

xi

JunosE 12.1.x System Event Logging Reference Guide

igmpGroupState . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 ikeCertificateMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 ikeEnrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 ikepki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 interModuleCommunication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ipAccessList . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ipEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ipEngineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 ipflowstats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 ipflowstatsEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 ipGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 ipIfCreator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ipInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ipNhopTrackerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 ipProfileMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 ipRoutePolicy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 ipRouteTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 ipsecIdDb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 ipsecP1Throttler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 ipsecXcfgSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 ipSubscriberMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 ipTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 ipTunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 ipv6AccessList . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 ipv6General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 ipv6Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 ipv6ProfileMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 ipv6RouteTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ipv6Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 ipv6Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 isisAdjChange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 isisAdjPackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 isisBfdEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 isisChecksumErr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 isisGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 isisHelloGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 isisHelloPackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 isisIpv6Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 isisLdpEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 isisLocalUpdate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 isisMplsTeAdvertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 isisMplsTeEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 isisNsfEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 isisProtocolErr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 isisSnpPackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 isisSpfEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 isisSpfStatistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 isisSpfTriggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 isisUpdatePackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

xii

Copyright 2011, Juniper Networks, Inc.

Table of Contents

isVoice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 itm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Chapter 11

L Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
l2cGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 l2cKeepAlive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 l2cPacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 l2tp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 l2tpDialoutGenerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 l2tpDisconnectCause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 l2tpIpLowerBinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 l2tpStateMachine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 lasv6General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 ldpConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 ldpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 ldpGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 ldpHelloMessages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 ldpHelloMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 ldpInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 ldpMessages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ldpPeer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ldpShimInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 ldpSocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 ldpTimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 ldpVpls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 ldpWorker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 localAddressServerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 localAuthServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 localEnableAuthServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 localLinePassword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Chapter 12

M Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
macroData . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 macroSchedular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mgtmGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 mgtmGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 mgtmv6General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 mgtmv6GracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 mldGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 mldGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 mldGroupState . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 mmcd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 mobileIpv4HaBinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 mobileIpv4HaEng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 mobileIpv4HaEvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 mobileIpv4HaLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 mplsFwdTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 mplsGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 mplsHighAvailability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 mplsMajorInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Copyright 2011, Juniper Networks, Inc.

xiii

JunosE 12.1.x System Event Logging Reference Guide

mplsMinorInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 mplsRouter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mplsShimInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mplsTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 mrInfoLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 mrInfoRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 mrInfoSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 mtraceLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 mtraceRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 mtraceSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 multicastTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Chapter 13

N Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
nameResolverLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 nfsClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 noneAaaAddrServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 noneAaaServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 ntpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Chapter 14

O Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
oam3ahAssociations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 oam3ahEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 oam3ahPdus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 os . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 ospfElectDr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 ospfGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 ospfHelloPktsRcvd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 ospfHelloPktsSent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 ospfInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 ospfLdpEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 ospfLsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 ospfNeighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 ospfPktsRcvd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 ospfPktsSent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 ospfRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 ospfRoute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 ospfSpfExt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 ospfSpfInter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 ospfSpfIntra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 ospfTeDatabase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 ospfTeSpf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 ospfv3ElectDr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 ospfv3General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 ospfv3HelloPktsRcvd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 ospfv3HelloPktsSent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 ospfv3Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 ospfV3Lsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 ospfv3Neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 ospfv3PktsRcvd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 ospfv3PktsSent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

xiv

Copyright 2011, Juniper Networks, Inc.

Table of Contents

ospfv3Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 ospfV3SpfExt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 ospfV3SpfInter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 ospfV3SpfIntra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Chapter 15

P Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
pimAutoRPRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 pimAutoRPSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 pimBsrRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 pimBsrSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 pimGracefulRestartLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 pimHelloRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 pimHelloSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 pimIpv6AutoRPRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 pimIpv6AutoRPSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 pimIpv6BsrRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 pimIpv6BsrSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 pimIpv6GracefulRestartLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 pimIpv6HelloRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 pimIpv6HelloSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 pimIpv6PktsRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 pimIpv6PktsSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 pimPktsRcvdLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 pimPktsSentLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 pimsmGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 pimsmMvpn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 policyMgrAttachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 policyMgrGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 policyMgrPacketLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 ppp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 pppoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 pppoeControlPacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 pppPacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 pppStateMachine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 profileMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

Chapter 16

Q Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
qm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 qos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 qosAttachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Chapter 17

R Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
radiusAttributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 radiusClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 radiusCoAAttributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 radiusDisconnectGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 radiusRelayGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 radiusSendAttributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 remOps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 resourceThresholdTrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

Copyright 2011, Juniper Networks, Inc.

xv

JunosE 12.1.x System Event Logging Reference Guide

ripBfd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 ripGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 ripRoute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 ripRtTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 routeDownloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 routerLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 rsvpAsyncMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 rsvpBfd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 rsvpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 rsvpGracefulRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 rsvpInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 rsvpTunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

Chapter 18

S Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 serviceability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 serviceMgr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 serviceMgrClientSession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 serviceMgrDcm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 serviceMgrMacroManager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 serviceMgrPerformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 serviceMgrServiceDef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 serviceMgrServiceInstance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 serviceMgrServiceSession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 serviceMgrSubscriberSession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 slep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 snmp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 snmpIfMib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 snmpPduAudit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 snmpSetPduAudit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 snmpTrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 sonet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 sonetPath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 sonetVT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 ssccDetailPm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 ssccDetailSsc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 ssccGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 ssccLacGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 ssh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 stTunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 stTunnelEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Chapter 19

T Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
tacacsPlusServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 tcpGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 tcpTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 tcpv6Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 telnetClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242

xvi

Copyright 2011, Juniper Networks, Inc.

Table of Contents

tftpClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 trackerEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 trackerGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 tsm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Chapter 20

U Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
udpTraffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 udpv6Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

Chapter 21

V Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
vrrp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 vrrpTracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 vsm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 vsmEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Part 3

Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

Copyright 2011, Juniper Networks, Inc.

xvii

JunosE 12.1.x System Event Logging Reference Guide

xviii

Copyright 2011, Juniper Networks, Inc.

List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii

Part 1
Chapter 1

Chapters
System Logging Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 3: Log Severity Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Copyright 2011, Juniper Networks, Inc.

xix

JunosE 12.1.x System Event Logging Reference Guide

xx

Copyright 2011, Juniper Networks, Inc.

About the Documentation

E Series and JunosE Documentation and Release Notes on page xxi Audience on page xxi E Series and JunosE Text and Syntax Conventions on page xxi Obtaining Documentation on page xxiii Documentation Feedback on page xxiii Requesting Technical Support on page xxiii

E Series and JunosE Documentation and Release Notes

For a list of related JunosE documentation, see http://www.juniper.net/techpubs/soft ware/index.html . If the information in the latest release notes differs from the information in the documentation, follow the JunosE Release Notes. To obtain the most current version of all Juniper Networks technical documentation, see the product documentation page on the Juniper Networks website at http://www.ju niper.net/techpubs/ .

Audience
This guide is intended for experienced system and network specialists working with Juniper Networks E Series Broadband Services Routers in an Internet access environment.

E Series and JunosE Text and Syntax Conventions

Table 1 on page xxii defines notice icons used in this documentation.

Copyright 2011, Juniper Networks, Inc.

xxi

JunosE 12.1.x System Event Logging Reference Guide

Table 1: Notice Icons

Icon Meaning
Informational note

Description
Indicates important features or instructions.

Caution

Indicates a situation that might result in loss of data or hardware damage.

Warning

Alerts you to the risk of personal injury or death.

Laser warning

Alerts you to the risk of personal injury from a laser.

Table 2 on page xxii defines text and syntax conventions that we use throughout the E Series and JunosE documentation.

Table 2: Text and Syntax Conventions

Convention
Bold text like this

Description
Represents commands and keywords in text.

Examples

Issue the clock source command. Specify the keyword exp-msg.

Bold text like this

Represents text that the user must type. Represents information as displayed on your terminals screen.

host1(config)#traffic class low-loss1 host1#show ip ospf 2

Fixed-width text like this

Routing Process OSPF 2 with Router ID 5.5.0.250 Router is an Area Border Router (ABR) Italic text like this

Emphasizes words. Identifies variables. Identifies chapter, appendix, and book names.

There are two levels of access: user and privileged. clusterId, ipAddress. Appendix A, System Specifications

Plus sign (+) linking key names

Indicates that you must press two or more keys simultaneously.

Press Ctrl + b.

Syntax Conventions in the Command Reference Guide

Plain text like this Italic text like this Represents keywords. Represents variables. terminal length mask, accessListName

xxii

Copyright 2011, Juniper Networks, Inc.

About the Documentation

Table 2: Text and Syntax Conventions (continued)

Convention
| (pipe symbol)

Description
Represents a choice to select one keyword or variable to the left or to the right of this symbol. (The keyword or variable can be either optional or required.) Represent optional keywords or variables. Represent optional keywords or variables that can be entered more than once. Represent required keywords or variables.

Examples
diagnostic | line

[ ] (brackets) [ ]* (brackets and asterisk)

[ internal | external ] [ level1 | level2 | l1 ]*

{ } (braces)

{ permit | deny } { in | out } { clusterId | ipAddress }

Obtaining Documentation
To obtain the most current version of all Juniper Networks technical documentation, see the Technical Documentation page on the Juniper Networks Web site at http://www.ju niper.net/. To download complete sets of technical documentation to create your own documentation CD-ROMs or DVD-ROMs, see the Portable Libraries page at
http://www.juniper.net/techpubs/resources/index.html

Copies of the Management Information Bases (MIBs) for a particular software release are available for download in the software image bundle from the Juniper Networks Web site athttp://www.juniper.net/.

Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can improve the documentation to better meet your needs. Send your comments to [email protected], or fill out the documentation feedback form at ht tps://www.juniper.net/cgi-bin/docbugreport/. If you are using e-mail, be sure to include the following information with your comments:

Document or topic name URL or page number Software release version

Requesting Technical Support

Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC). If you are a customer with an active J-Care or JNASC support contract,

Copyright 2011, Juniper Networks, Inc.

xxiii

JunosE 12.1.x System Event Logging Reference Guide

or are covered under warranty, and need post-sales technical support, you can access our tools and resources online or open a case with JTAC.

JTAC policiesFor a complete understanding of our JTAC procedures and policies, review the JTAC User Guide located at http://www.juniper.net/us/en/local/pdf/resourceguides/7100059-en.pdf . Product warrantiesFor product warranty information, visit http://www.juniper.net/sup port/warranty/ . JTAC hours of operationThe JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.

Self-Help Online Tools and Resources

For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features:

Find CSC offerings: http://www.juniper.net/customers/support/ Search for known bugs: http://www2.juniper.net/kb/ Find product documentation: http://www.juniper.net/techpubs/ Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/ Download the latest versions of software and review release notes: http://www.juni
per.net/customers/csc/software/

Search technical bulletins for relevant hardware and software notifications: ht

tps://www.juniper.net/alerts/

Join and participate in the Juniper Networks Community Forum: http://www.juni

per.net/company/communities/

Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/

To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/

Opening a Case with JTAC

You can open a case with JTAC on the Web or by telephone.

Use the Case Management tool in the CSC at http://www.juniper.net/cm/ . Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

For international or direct-dial options in countries without toll-free numbers, see ht tp://www.juniper.net/support/requesting-support.html .

xxiv

Copyright 2011, Juniper Networks, Inc.

PART 1

Chapters

System Logging Overview on page 3 Event Categories on page 21

Copyright 2011, Juniper Networks, Inc.

JunosE 12.1.x System Event Logging Reference Guide

Copyright 2011, Juniper Networks, Inc.

CHAPTER 1

System Logging Overview

E Series Broadband Services Routers enable you to log system events to discover and isolate problems with your system. This chapter explains how to use the command-line interface (CLI) to monitor your systems log configuration and stay informed about all system events that you want to track. This chapter contains the following sections:

Overview of System Logging on page 3 Logging Platform Considerations on page 4 Configuring Event Logging on page 5 Configuring Log Severity for Individual and Systemwide Logs on page 10 Configuring Log Verbosity for Individual Logs or All Logs on page 14 Setting the Timestamp for Log Messages on page 14 Configuring Log Filters on page 15 Turning Off Log Filters on page 16 Monitoring Logging System Events on page 17

Overview of System Logging

System events are classified into event categories. Using the CLI, you can determine which event categories to log. To fully utilize the logging facility, you need to understand log severity and log verbosity.

Log Severity
Log severity is a level that is assigned to an event or log message. Log severity levels apply to event categories, such as bulkStats, bgpRoutes, or atm1483. The minimum severity of a log message for an individual category is described either by a severity number in the range 07 or a descriptive priority term, such as emergency or debug. The lower the severity number is, the higher the priority. See Table 3 on page 4.

NOTE: Not every event category supports every severity level. For a list of event categories and the severity levels that each category supports, see Event Categories on page 21.

Copyright 2011, Juniper Networks, Inc.

JunosE 12.1.x System Event Logging Reference Guide

Table 3: Log Severity Descriptions

Severity Number
0 1 2 3 4 5

Severity Name
Emergency Alert Critical Error Warning Notice

System Response
System unusable; shelf reset Immediate action needed; card reset Critical conditions exist; interface is down Error conditions; nonrecoverable software error Warning conditions; recoverable software error Normal but significant conditions; nonerror, low-verbosity information Informational messages; nonerror, medium-verbosity information Debug messages; nonerror, high-verbosity information

Info

Debug

Log Verbosity
The verbosity level determines the amount of information that appears in each message. You can assign the verbosity level for the log category. Verbosity levels can be any of the following:

LowTerse MediumModerate HighVerbose

NOTE: Many event categories provide only low-verbosity detail regardless of the verbosity setting.

Persistent Logs
Log messages can survive a system reboot. After a reboot, the system rebuilds the list of log messages. However, if the system detects any problems or has gone through a power cycle, the buffer is reset, and the log messages from the previous session are lost. Log messages are not synchronized between primary and redundant SRP modules. During a switchover from a primary to a redundant SRP module, existing log messages are not transferred to the redundant SRP module.

Logging Platform Considerations

System logs are supported on all E Series routers.

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

For information about the modules supported on E Series routers:

See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router. See the E120 and E320 Module Guide for modules supported on the Juniper Networks E120 and E320 Broadband Services Routers.

Configuring Event Logging

By default, event logging is enabled and has default settings. This section explains how to change settings to customize event logging to fit your needs.

Set a baseline for when the system begins logging messages.

host1#baseline log 11:12:55 April 30 2002

Set the log severity.

host1(config)#log severity warning

Remove the limit on the number of buffers available for an event category.
host1(config)#log unlimit qos

Set the log verbosity.

host1(config)#log verbosity low

Log messages to a specified destination.

host1(config)#log destination syslog 10.10.9.5 include ospfGeneral mplsGeneral os

Select fields to be added to logs.

host1(config)#log fields timestamp instance no-calling-task

Enable logs destined for a console to be displayed at the current console device.
host1#log here

The next sections explain how to configure individual and systemwide logs, how to format timestamps for log messages, and how to configure log filters. baseline log

Use to set a baseline for logging events. Only log messages timestamped after the baseline appear when you enter the show log data delta command. To use the current system time, do not enter any options. To set a specific time, use the following syntax: Hour:Minute[:Second]Current time in 24-hour format. Seconds are optional.

utcEnter this keyword to indicate that the time entered is in universal coordinated time (UTC), rather than local time. To set a specific date, use the following syntax: Month Day YearYou must spell out the name of the month.

Copyright 2011, Juniper Networks, Inc.

JunosE 12.1.x System Event Logging Reference Guide

last-resetCauses the system to display log messages generated since the last time the system was reset Examples
host1#baseline log 11:12:55 April 30 2002 host1#baseline log last-reset

There is no no version. See baseline log. Use to log messages to the specified destination, including system log, console, and nv-file (nonvolatile storage).

log destination

NOTE: You can display traffic logssuch as ipTraffic, icmpTraffic, tcpTraffic, and udpTrafficonly through the show log data command or from the SRP module console. You cannot redirect traffic logs elsewhere, such as to a system log or nonvolatile storage file, or to a Telnet session.

Use the severity keyword to limit the messages logged based on priority level. The following information applies to logging messages to system log servers.

You can have multiple system log servers, but must configure logging to each one separately. A particular message within a specified event category is logged to a particular system log server only if the priority of the message is greater than or equal to both the priority of the event category and the priority of that system log server. If you log messages to a system log server, you can also specify:

facilitySpecifies a facility ID on the system log destination host. The range is 07, representing the logging facilities local0local7. includeLogs only the listed categories to system log; no other categories are logged unless specifically included by issuing this command again. excludeLogs all categories to system log except the listed categories; all other categories are logged unless specifically excluded by issuing this command again.

Issuing an include command after an exclude command (or vice versa) overrides the earlier command. Therefore, you cannot enter a command including certain categories and then follow it with a command excluding others. Similarly, you cannot enter a command excluding certain categories and then follow it with a command including others. You can issue successive include commands or successive exclude commands; in this case, the successive commands expand the list of included or excluded categories.

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

Example 1The first command causes only the osfpGeneral, mplsGeneral, and os event categories to be logged to system log at 10.10.9.5. The second command reverses this inclusion and restores the logging of all event categories.
host1(config)#log destination syslog 10.10.9.5 include ospfGeneral mplsGeneral os host1(config)#no log destination syslog 10.10.9.5

Example 2The first command again causes only the osfpGeneral, mplsGeneral, and os event categories to be logged to system log at 10.10.9.5. The second command reverses the inclusion of ospfGeneral and os. The mplsGeneral category is still included and is thus the only category logged.
host1(config)#log destination syslog 10.10.9.5 include ospfGeneral mplsGeneral os host1(config)#no log destination syslog 10.10.9.5 include ospfGeneral os

Example 3The first command causes the isisGeneral, ipRoutePolicy, and ipTraffic event categories to be excluded from logging to system log at 10.1.2.3. The second command reverses this exclusion and restores the logging of all event categories.
host1(config)#log destination syslog 10.1.2.3 exclude isisGeneral ipRoutePolicy ipTraffic host1(config)#no log destination syslog 10.1.2.3 exclude

Example 4The first command again causes the isisGeneral, ipRoutePolicy, and ipTraffic event categories to be excluded from logging to system log at 10.1.2.3. The second command reverses the exclusion of ipRoutePolicy and ipTraffic. The isisGeneral category is still excluded; all other events are logged.
host1(config)#log destination syslog 10.1.2.3 exclude isisGeneral ipRoutePolicy ipTraffic host1(config)#no log destination syslog 10.1.2.3 exclude isisGeneral

Example 5The first command causes the isisGeneral event category to be excluded from logging to system log at 10.1.2.3. The second command causes ospfGeneral to also be excluded from logging.
host1(config)#log destination syslog 10.1.2.3 exclude isisGeneral host1(config)#log destination syslog 10.1.2.3 exclude ospfGeneral

Example 6The first command causes the isisGeneral event category to be excluded from logging to system log at 10.1.2.3; all other events are logged. The second command overrides the first and causes the exclusion of all events except ospfGeneral.
host1(config)#log destination syslog 10.1.2.3 exclude isisGeneral host1(config)#log destination syslog 10.1.2.3 include ospfGeneral

Use the no version to reverse the effects of previous commands or restore the default, which is to log all event categories. See log destination. Use to specify a source interface type and location for events logged to system log at the specified IP address. Overrides the actual source interface type and location. The IP address associated with the specified source interface is used as the source address for subsequent system log messages.

log destination syslog source

Copyright 2011, Juniper Networks, Inc.

JunosE 12.1.x System Event Logging Reference Guide

Example
host1(config)#log destination syslog 10.1.2.3 source atm 0/1

Use the no version to restore the actual source interface type and location. See log destination syslog source. Use to enable engineering logs. Provides troubleshooting information to assist you when contacting Juniper Networks Technical Assistance Center (JTAC). Example
host1(config)#log engineering

log engineering

Use the no form of this command to disable engineering logs. See log engineering. Use to select fields to be added to all logs. These fields include a timestamp for the message, an instance identifier, and the name of the internal software application that created the message. Example
host1(config)#log fields timestamp instance no-calling-task

log fields

Use the no version to restore the default log field settings. See log fields. Use to enable logs destined for a console to be displayed at the current console. By default, the local console automatically receives all log messages if console is a destination. The exception is the cliCommand log, whose log events do not appear on the console. By default, Telnet consoles do not receive log messages. Example
host1#log here

log here

Use the no version to disable logs destined for a console from being displayed on this console. See log here.

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

log severity

Use to set the severity level for systemwide logs (that is, when you do not specify an individual event category) or for a specific event category. For a list of severity values, see Table 3 on page 4.

NOTE: Assigning a log severity to an individual event category changes its state to Assigned. You cannot change the severity of that event category using systemwide level commands until you return the event category to its default, unassigned state with the no log severity command.

If you do not specify a category, the severity value changes for all categories except individual categories for which you previously set a specific severity level. See Configuring Log Severity for Individual and Systemwide Logs on page 10 for details. Each event category has its own default severity value. For most categories, the default is Error. To disable all default level log messages, use the off keyword without specifying an event category. To disable individual level log messages, use the off keyword and specify the event category that you want to disable. Example
host1(config)#log severity warning

Use the no version to return the systemwide (when assigned) or default severity values to event categories. Use the no version with an* (asterisk) to return all event categories (modified either systemwide or individually) to their default severity setting. For example:
host1(config)#no log severity *

See log severity. Use to remove the limit on the number of outstanding buffers for an event category, such as when the system is dropping logs of a particular category. Example
host1(config)#log unlimit qos

log unlimit

Use the no version to return to the default value. See log unlimit. Use to set the verbosity level for a selected category or for all categories. If you do not specify a category, then the verbosity level is set for all categories. The default verbosity setting for all logs is low. Example
host1(config)#log verbosity low

log verbosity

Copyright 2011, Juniper Networks, Inc.

JunosE 12.1.x System Event Logging Reference Guide

Use the no version to return to the default verbosity (low) for the selected category. See log verbosity.

Configuring Log Severity for Individual and Systemwide Logs

You can change the severity setting for individual logs and the systemwide value. When working with log severities, keep the following in mind:

All log event categories have a default. However, the default values can vary for each category. For example, most event categories have a default severity of Error. However, some event categories may have a default severity of Notice, Warning, Info, and so on. Log event categories have two statesunassigned (default) and assigned. How a log event category reacts to the log severity command depends on its current state. You can change log severities for event categories at a systemwide level or an individual level. Systemwide changes are those that modify a large number of unassigned event categories at one time; for example, the command log severity debug off. Individual changes are those that indicate an explicit event category that you want to change; for example, the command log severity notice clicommand. Changes to log event categories at an individual level take precedence over those made at the systemwide level. Changes to log event categories at the systemwide level take precedence over the default. Assigning a log severity to an individual event category changes its state to Assigned. This means that you cannot change the severity of that event category using systemwide level commands until you return the event category to its default, unassigned state by using the no log severity eventCategory command. To return all logs, systemwide and individual, to their default, unassigned severity level, use the no log severity * command. To see whether individual or systemwide severity and verbosity settings are in effect, use the show log configuration command.

Example

The following example demonstrates the effects of event category state in regard to using systemwide commands:
1.

In Configuration mode and having made no changes to the severity settings of any event categories, view the log configuration:
host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled no log severity

10

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5

severity -------ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR

verbosity --------low low low low low low low low low

filters -------

notes -----

Notice that the atm event category has a default severity of Error.
2. Change all event categories to Warning, systemwide, and view the log configuration: host1(config)#log severity warning host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity WARNING category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5 severity -------WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING verbosity --------low low low low low low low low low filters ------notes ----1 1 1 1 1 1 1 1 1

3. Change the atm category to have a log severity of Emergency and view the log

configuration:
host1(config)#log severity emergency atm host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity WARNING category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral severity -------WARNING WARNING WARNING WARNING WARNING verbosity --------low low low low low filters ------notes ----1 1 1 1 1

Copyright 2011, Juniper Networks, Inc.

11

JunosE 12.1.x System Event Logging Reference Guide

ar1AaaServerGeneral atm atm1483 atmAal5

WARNING EMERGENCY WARNING WARNING

low low low low

1 2 1 1

4. Change all event categories to Alert, systemwide, and view the log configuration: host1(config)#log severity alert host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity ALERT category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5 severity -------ALERT ALERT ALERT ALERT ALERT ALERT EMERGENCY ALERT ALERT verbosity --------low low low low low low low low low filters ------notes ----1 1 1 1 1 1 2 1 1

Notice that the atm event category that you individually assigned in Step 3 does not change.
5. Turn off log notification, systemwide, and view the log configuration: host1(config)#log severity off host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity OFF category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5 severity --------OFF OFF OFF OFF OFF OFF EMERGENCY OFF OFF verbosity --------low low low low low low low low low filters ------notes ----1 1 1 1 1 1 2 1 1

Notice that the atm event category does not change.

12

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

6. Remove the assigned status of the atm event category and view the log configuration: host1(config)#no log severity atm host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity OFF category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5 severity -------OFF OFF OFF OFF OFF OFF OFF OFF OFF verbosity --------low low low low low low low low low filters ------notes ----1 1 1 1 1 1 1 1 1

Notice that the atm event category follows the systemwide severity level of OFF. The systemwide setting takes precedence over the atm event category default of Error.
7. Change all event categories, systemwide, to their default/unassigned levels, and view

the log configuration:

host1(config)#no log severity * Please wait.... host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled no log severity category -------------------aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral aaaUserAccess addressServerGeneral ar1AaaServerGeneral atm atm1483 atmAal5 severity -------ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR verbosity --------low low low low low low low low low filters ------notes -----

Copyright 2011, Juniper Networks, Inc.

13

JunosE 12.1.x System Event Logging Reference Guide

Configuring Log Verbosity for Individual Logs or All Logs

The default verbosity setting for all logs is low. To change the logging verbosity of an individual log, specify a category when you enter the log verbosity command. To change the log verbosity of every log, do not specify an event category when you enter the log verbosity command. However, after you enter the log verbosity command without specifying a particular event category, all logs are set to the new verbosity. No log verbosity overrides are saved. Example The following example sets all log categories to verbosity medium, and then it sets the verbosity level for ds3 events to high.
host1(config)#log verbosity medium host1(config)#log verbosity high ds3

Setting the Timestamp for Log Messages

You can use the service timestamps command to format timestamps for log messages. By default, log messages display universal coordinated time (UTC) without the time zone. The following examples illustrate how you can change the timestamp on log messages.

Set the time zone to eastern daylight time (EDT), 5 hours behind UTC, and display the local time on the log messages.
host1(config)#clock timezone EDT -5

Display UTC, but no time zone, on the log messages.

host1(config)#service timestamps log datetime host1#exit host1#show log data category cliCommand severity info *********************************************************** NOTICE 05/14/2001 18:24:49 cliCommand: "configure terminal", console NOTICE 05/14/2001 18:24:45 cliCommand: "service timestamps log datetime", console ***********************************************************

Display UTC and the time zone on the log messages.

host1#configure terminal host1(config)#service timestamps log datetime show-timezone host1(config)#exit host1#show log data category cliCommand severity info *********************************************************** NOTICE 05/14/2001 18:28:45 UTC EDT cliCommand: "configure terminal", console NOTICE 05/14/2001 18:28:42 UTC EDT cliCommand: "service timestamps log datetime show-timezone", console ***********************************************************

Display no timestamp on the log messages.

host1#configure terminal host1(config)#no service timestamps

14

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

host1#exit host1#show log data category cliCommand severity info *********************************************************** NOTICE 134 cliCommand: "configure terminal", console NOTICE 133 cliCommand: "no service timestamps", console ***********************************************************

service timestamps

Use to format timestamps for log messages. For information about setting local times and time zones, see JunosE System Basics Configuration Guide. The show log data command displays the log data with the current timestamp format. The show log data nv-file command displays the log data with the timestamp format in effect at the time the log record was written. Use the no version to remove timestamps from log messages. See service timestamps.

Configuring Log Filters

Many event categories contain filters so you can further refine the type of information that the system logs. For example, when logging BGP connections, you can limit the information logged to a specific access class, peer, route map, or virtual router. You define filters when you set the log severity for an event category. The online Help shows the options you can set for each filter.

NOTE: You can use the packet flow monitoring feature to create user-defined classification parameters that specify the packet data that is logged. See Packet Tagging Overview.

The following example creates a filter that logs BGP connection information at the debug severity level on traffic that matches access list ListOne, and is incoming traffic to virtual router default.
host1(config)# log severity debug bgpevents ? access-class Select an access list for the filter in Select import/in direction for the filter out Select export/out direction for the filter peer Select a peer IP address for the filter route-map Select a route map for the filter router Identify an instance of a virtual router <cr> host1(config)# log severity debug bgpevents access-class ? WORD The access list host1(config)# log severity debug bgpevents access-class ListOne ? filtering-router Identify virtual router where access-class/route-map are defined in Select import/in direction for the filter out Select export/out direction for the filter route-map Select a route map for the filter <cr>

Copyright 2011, Juniper Networks, Inc.

15

JunosE 12.1.x System Event Logging Reference Guide

host1(config)# log severity debug bgpevents access-class ListOne route-map ? WORD The route map host1(config)# log severity debug bgpevents access-class ListOne route-map default ? filtering-router Identify virtual router where access-class/route-map are defined in Select import/in direction for the filter out Select export/out direction for the filter <cr> host1(config)# log severity debug bgpevents access-class ListOne route-map default in

The next example limits the logging of PPP debug events to traffic to or from the POS interface in slot 2/0.
host1(config)#log severity debug ppp ? atm Specify an ATM PPP interface fastEthernet Specify a fastEthernet interface gigabitEthernet Specify a gigabitEthernet interface mlppp Specify an MLPPP network interface pos Specify a POS PPP interface serial Specify a serial PPP interface <cr> host1(config)#log severity debug ppp pos 2/0

To obtain a list of the filters available in each event category, see Event Categories on page 21 .

Turning Off Log Filters

You can turn off filters in three ways:

Turn off all filters Turn off all filters for an event category Turn off a specific filter

To turn off all filters:

host1(config)#no log filters

To turn off all filters for an event category, use the no version of the log severity command along with the category name. For example:
host1(config)#no log severity bgpEvents filters

To turn off a specific filter, use the no version of the log severity command that you used to add the filter. For example:
host1(config)#no log severity bgpEvents peer 10.0.0.2 10.0.0.1

no log filters

Use to turn off log filters. To turn off all filters for an event category, specify the category name. Example
host1(config)#no log filters

16

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

To turn off a specific filter, use the no version of the log severity command that you used to add the filter. See no log filters.

Monitoring Logging System Events

Use the show log configuration command to display your log configuration. Use the show log data command to display system events on your screen. You can use the output filtering feature of the show command to include or exclude lines of output based on a text string you specify. See show Commands in JunosE System Basics Configuration Guide for details. show log configuration

Use to show the logging configuration on your system. Example 1Factory defaults are set
host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task no log severity category ------------------------NameResolverLog aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral addressServerGeneral atm atm1483 atmAal5 bgpConnections ... cliCommand controlNetworkSlave cops ... udpTraffic severity -------ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR NOTICE ERROR ERROR ERROR verbosity --------low low low low low low low low low low low low low filters -------

Example 2Individual log udpTraffic is set to warning

host1#(config)#log severity warning udpTraffic host1##show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task no log severity category ------------------------NameResolverLog aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral severity -------ERROR ERROR ERROR ERROR verbosity --------low low low low filters -------

Copyright 2011, Juniper Networks, Inc.

17

JunosE 12.1.x System Event Logging Reference Guide

addressServerGeneral atm atm1483 atmAal5 bgpConnections ... cliCommand controlNetworkSlave cops ... udpTraffic

ERROR ERROR ERROR ERROR ERROR NOTICE ERROR ERROR WARNING*

low low low low low low low low low

* Default severity setting is overridden by the individual log severity setting.

Example 3Log severity is set to alert

host1#(config)#log severity alert host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task log severity ALERT category ------------------------NameResolverLog aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral addressServerGeneral atm atm1483 atmAal5 bgpConnections ... cliCommand controlNetworkSlave cops ... udpTraffic severity -------ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# verbosity --------low low low low low low low low low low low low low filters -------

* Default severity setting is overridden by the system-wide severity setting.

Example 4Individual log atm is set to severity warning

host1#(config)#log severity warning atm host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task log severity ALERT category ------------------------NameResolverLog aaaAtm1483Cfg aaaEngineGeneral aaaServerGeneral severity -------ALERT# ALERT# ALERT# ALERT# verbosity --------low low low low filters -------

18

Copyright 2011, Juniper Networks, Inc.

Chapter 1: System Logging Overview

addressServerGeneral atm atm1483 atmAal5 bgpConnections ... cliCommand controlNetworkSlave cops ... udpTraffic

ALERT# WARNING* ALERT# ALERT# ALERT# ALERT# ALERT# ALERT# ALERT#

low low low low low low low low low

* Default severity setting is overridden by the system-wide severity setting. * Default severity setting is overridden by the individual log severity setting.

See show log configuration. Use to display system events. Use keywords to select which events are displayed:

show log data

categoryLimits the display to a single log event category. See the CLI online Help for available categories.

Example
host1#show log data category os

deltaLimits the display to events that occurred after the time set with the log baseline command. nv-fileDisplays the information that is currently logged to nonvolatile storage.

Example
host1# show log data nv-file logFile.temp: The system cannot find the file specified. ALERT 09/12/2000 21:29:17 os: ASSERTION FAILED: file mplsNvs2.cc, line 789 ALERT 09/20/2000 02:18:06 os: ASSERTION FAILED: file osPool.cc, line 819 ALERT 09/20/2000 02:26:35 os: ASSERTION FAILED: file osPool.cc, line 819 ALERT 09/20/2000 02:44:33 os: ASSERTION FAILED: file osPool.cc, line 819 ALERT 09/20/2000 04:56:35 os: ASSERTION FAILED: file osPool.cc, line 819 ALERT 09/27/2000 03:10:25 os: ASSERTION FAILED: file /sw0/sc/nvs/include/../nvMapBackend.h, line 235 ALERT 10/02/2000 04:05:42 os: ASSERTION FAILED: file osHeap.cc, line 439 ALERT 10/02/2000 04:08:04 os: ASSERTION FAILED: file osMessageQueue.cc, line 42, rip1 ALERT 10/12/2000 03:43:38 os: PANIC: file osSemaphore.cc, line 54 ALERT 11/01/2000 02:03:49 os: ASSERTION FAILED: file cliCommand.cc, line 195

severityDisplays events that have a specific severity level.

Example

Copyright 2011, Juniper Networks, Inc.

19

JunosE 12.1.x System Event Logging Reference Guide

host1# NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE

show log data severity notice 01/10/2001 00:59:50 os: config -- using running 01/10/2001 00:59:52 os: srp application, build date: 0x3a437424 (FRI DEC 22 2000 15:32:52 UTC) 01/10/2001 00:59:52 os: last reset: user reboot, reason: not specified 01/10/2001 00:59:52 os: OsIsrRegistrar: 0xb 01/10/2001 00:59:52 os: OsIsrRegistrar: 0xa 01/10/2001 00:59:52 os: OsIsrRegistrar: 0x2

By combining keywords, you can further limit the information displayed. See the CLI online Help for information about the keywords available at each level.
host1#show log data nv-file severity alert

See show log data.

20

Copyright 2011, Juniper Networks, Inc.

CHAPTER 2

Event Categories
This chapter lists each event category in the system software. To help you determine the severity level to set when troubleshooting, the log strategy for each event category is included. The log strategy shows the type of information logged for each severity level. In addition, this chapter includes the filters available in each event category.

Copyright 2011, Juniper Networks, Inc.

21

JunosE 12.1.x System Event Logging Reference Guide

22

Copyright 2011, Juniper Networks, Inc.

PART 2

Event Categories

A Commands on page 25 B Commands on page 33 C Commands on page 49 D Commands on page 55 E Commands on page 75 F Commands on page 77 G and H Commands on page 83 I Commands on page 87 L Commands on page 123 M Commands on page 139 N Commands on page 159 O Commands on page 163 P Commands on page 187 Q Commands on page 207 R Commands on page 209 S Commands on page 223 T Commands on page 239 U Commands on page 247 V Commands on page 249

Copyright 2011, Juniper Networks, Inc.

23

JunosE 12.1.x System Event Logging Reference Guide

24

Copyright 2011, Juniper Networks, Inc.

CHAPTER 3

A Commands

aaaAtm1483Cfg on page 25 aaaEngineGeneral on page 26 aaaQosCfg on page 26 aaaServerGeneral on page 27 aaaUserAccess on page 27 addressServerGeneral on page 28 ar1AaaServerGeneral on page 28 atm on page 29 atm1483 on page 30 atm1483VcClass on page 30 atmAal5 on page 31 atmVcClass on page 31 auditIpsec on page 32

aaaAtm1483Cfg
Description Emergency Alert Critical Error Warning Log AAA ATM 1483 subinterface configuration None None None None Illegal service category traffic parameter received from AAA; unable to modify circuit traffic parameters using those received from AAA None None

Notice Log Info

Copyright 2011, Juniper Networks, Inc.

25

JunosE 12.1.x System Event Logging Reference Guide

Debug

Notification from AAA indicating that an ATM 1483 subinterface configuration is available; ATM 1483 processing configuration received from AAA; unable to get ATM 1483 subinterface information; number of ATM 1483 configuration entries is out of range None

Filter

aaaEngineGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter AAA engine general None None None None None Control flow and key events, less verbose than debug None Control flow and key events None

aaaQosCfg
Description Emergency Alert Critical Error Warning Log Notice Log Info AAA QoS configuration logs None None None None None None None

26

Copyright 2011, Juniper Networks, Inc.

Chapter 3: A Commands

Debug Filter

AAA QoS configuration tracking None

aaaServerGeneral
Description Emergency Alert Critical Error AAA server general None None None Subscriber count exceeds license plus grace; internal attachment errors; unable to delete username trigger from NVS; unable to insert encrypted username trigger in NVS Subscriber count exceeds license; cannot grow internal memory pools; accounting message failures; the Framed-IPv6-Prefix RADIUS attribute is used for both IPv6 Neighbor Discovery router advertisements and DHCPv6 Prefix Delegation;Notify duplicate event ignored for profileHandle: profileHandle issu in progress; Notify duplicate event ignored for profileHandle: profileHandle unable to allocate memory; unable to delete trigger from aaaUsernameToTriggerDataMap Authentication failures resulting from memory allocation failures None Authentication failures resulting from reasons other than memory allocation failures; status of authentication; accounting and address assignment requests sent to local (internal) servers; duplicate accounting message failures; EAP challenge received; memory allocation failure for tunnel definition table and profile; failed to insert tunnel attribute and tunnel tag table; container size exceeded: creating new; found unexpected tunnel table; dsl-forum atrribute type parse error: limited data or overflow; Duplicate prefix event received for profileHandle: profileHandle; failed to configure radiusPerProfileMap entry due to unavailability of the resources; failed to configure aaaPerProfileNameMap entry due to insertion failure; deletion of the AAA per-profile results in an internal error due to failure of the AAA per-profile name mapping table; displays the value of NAS-Port and NAS-Port-Type None

Warning Log

Notice Log Info Debug

Filter

aaaUserAccess
Description Emergency AAA user access None

Copyright 2011, Juniper Networks, Inc.

27

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None None None User is granted or denied access None None

addressServerGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Address server general None None None None Address server request failure (for example, configured address server is not available) None None None None

ar1AaaServerGeneral
Description Emergency Alert Platform-dependent AAA server None None

28

Copyright 2011, Juniper Networks, Inc.

Chapter 3: A Commands

Critical Error Warning Log Notice Log Info Debug Filter

None Internal (NVS) errors for limit configuration per interface None None None Interface information insufficient to identify the users interface location None

atm
Description Emergency Alert Critical Error Warning Log ATM interface None None None Unable to reenable ILMI administrative state after UNI version change Error getting location of underlying physical interface; error binding or unbinding to physical interface; error allocating memory for new interface; error setting system identifier; error adding or configuring an interface; error getting capabilities of interface; error getting maximum VPI/VCI for interface; error getting maximum virtual circuit descriptor for interface; unable to store or allocate memory for F4 OAM circuit data; unable to configure F4 OAM circuit for interface Interface pool expanded by an incremental number of entries; report retry delay in seconds when waiting for the underlying physical interface to be created; unable to allocate a message to send an interface up or down notification; unable to add or configure interface Dropping interface up, down, or not present notification due to removal of interface; discarding F4 OAM circuits when interface does not support F4 OAM None None

Notice Log

Info

Debug Filter

Copyright 2011, Juniper Networks, Inc.

29

JunosE 12.1.x System Event Logging Reference Guide

atm1483
Description Emergency Alert Critical Error ATM 1483 data service None None None Error applying static map entry for a newly created circuit of an NBMA interface; unable to configure interfaces on ATM interface; unable to determine interface location for ATM AAL5 interface; unable to determine maximum interface configuration count for interface; unable to configure interface on ATM interface Error getting location of underlying AAL5 or ATM interface; error binding to AAL5 interface; error opening a circuit for an NBMA interface; attempting to associate a static map to an underlying ATM interface that does not exist; error restoring circuits from NVS; error removing static map entry; NVS entry not found for static map entry; error storing static map entry in NVS; error expanding interface pool, interface binding pool, or subscriber pool Interface pool, interface binding pool, or subscriber pool expanded by an incremental number of entries; unable to allocate a message to send a subinterface up or down notification Dropping subinterface up or down notification due to removal of subinterface; configure interfaces on ATM interface; elapsed time for downloading interfaces; elapsed time for ATM AAL5 present notification; maximum interface count per call None None

Warning Log

Notice Log

Info

Debug Filter

atm1483VcClass
Description Emergency Alert Critical Error Application of attributes configured in a virtual circuit (VC) class to PVCs None None None In routers with high availability enabled, failure to mirror the VC modification or failure to associate the VC modification with the standby SRP module

30

Copyright 2011, Juniper Networks, Inc.

Chapter 3: A Commands

Warning Log

Failure to find the PVCs associated with this VC class; failure to apply the VC class attributes to the appropriate PVCs; the log message displays a brief description of the failure None None None None

Notice Log Info Debug Filter

atmAal5
Description Emergency Alert Critical Error Warning Log ATM Adaptation Layer 5 None None None None Error getting location of underlying ATM interface; error binding to ATM interface; unable to expand interface pool; error creating interface; unable to set administrative status of interface Interface pool expanded by an incremental number of entries; report retry delay in seconds when waiting for the underlying ATM interface to be created; unable to allocate a message to send an interface up or down notification Dropping interface up or down notification due to removal of interface None None

Notice Log

Info Debug Filter

atmVcClass
Description Emergency Alert Information on VC class operational errors None None

Copyright 2011, Juniper Networks, Inc.

31

JunosE 12.1.x System Event Logging Reference Guide

Critical Error

None Resource failure errors, such as error allocating memory for adding a VC class; internal software errors; error processing a VC class association; when using SNMP, unable to set a VC class state from not in service to in service, or vice-versa; unable to find an existing VC class in the internal data structure; unable to complete processing after a high availability switchover None None None Unable to update mirrored storage for a high availability switchover None

Warning Log Notice Log Info Debug Filter

auditIpsec
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IKE SA negotiations None None None None None Information about IKE SA negotiation payloads None None None

32

Copyright 2011, Juniper Networks, Inc.

CHAPTER 4

B Commands

bfdAdaptivity on page 33 bfdEvents on page 34 bfdGeneral on page 34 bfdSession on page 35 bgpConnections on page 35 bgpDampening on page 36 bgpEvents on page 37 bgpGeneral on page 38 bgpGracefulRestart on page 38 bgpIpv6NextHops on page 39 bgpKeepAlives on page 40 bgpMessages on page 41 bgpNeighborChanges on page 42 bgpNextHops on page 42 bgpRoutes on page 43 bridge on page 46 bridgeEngine on page 46 bridgingMgr on page 47 bulkStats on page 47

bfdAdaptivity
Description Emergency Alert Critical Error BFD adaptivity events None None None None

Copyright 2011, Juniper Networks, Inc.

33

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter

None None BFD session adaptivity events BFD session adaptivity events None

bfdEvents
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter BFD Events None None None None None None BFD session state changes None None

bfdGeneral
Description Emergency Alert Critical Error Warning Log BFD general events None None None None None

34

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

Notice Log Info Debug Filter

BFD enabled/disabled on an interface from a client None None None

bfdSession
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter BFD session events None None None None Unknown BFD session Session state changes Session parameter changes None None

bgpConnections
Description Emergency Alert Critical Error BGP TCP/IP connection activity None None None Error setting password for specified peer; error binding to update-source address for specified peer TCP error occurred while receiving data

Warning Log

Copyright 2011, Juniper Networks, Inc.

35

JunosE 12.1.x System Event Logging Reference Guide

Notice Log

Outbound TCP connection initiated, completed, or failed; inbound TCP connection accepted, refused, or failed; TCP connection closed by peer None TCP connection is ready to send; data received on TCP connection; notification message sent; could not send notification message due to flow controlwill retry later; error while sending notification message; keepalive message sent; could not send keepalive message due to flow controlwill retry later; error while sending keepalive message; message other than notification or keepalive sent; could not send other message than notification or keepalive due to flow controlwill retry later; error while sending other message than notification or keepalive access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported outThis filter is not currently supported

Info Debug

Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

bgpDampening
Description Emergency Alert Critical Error Warning Log Notice Log BGP dampening None None None None None Route is suppressed by route-flap dampening; route is no longer suppressed by route-flap dampening None None

Info Debug

36

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported outThis filter is not currently supported

bgpEvents
Description Emergency Alert Critical Error Warning Log Notice Log BGP finite state machine (FSM) events and transitions None None None Event occurred that was not expected for current state None One of the following events occurred: start, stop, inbound-connection-arrived, outbound-connection-complete, connection-error, connection-closed, start-timer-expired, connect-timer-expired, hold-timer-expired, keep-alive-timer-expired, open-received, update-received, keep-alive-received, notification-received, route-refresh, route-refresh-cisco None None access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported

Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5

Copyright 2011, Juniper Networks, Inc.

37

JunosE 12.1.x System Event Logging Reference Guide

Filter 6

outThis filter is not currently supported

bgpGeneral
Description Emergency Alert Critical Error Warning Log Notice Log BGP general information None None None None None BGP IPv4 route-target-signaling address family enabled or disabled; making local route to multihomed site less preferred (local-preference <> ) because down bit is set None Setting local preference to <> for redistributed route of layer2 site access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported outThis filter is not currently supported

Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

bgpGracefulRestart
Description Emergency Alert Critical BGP Graceful Restart Feature log None None None

38

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

Error Warning Log Notice Log

None None Log BGP performed or did not perform a graceful restart; router supports or does not support non-stop forwarding; router is capable of switching gracefully, deferring, or resuming best path selection decision process; BGP routes allowed or prevented from being downloaded to line cards; graceful-restart timer expiration; marking or removing stale routes; waiting to receive end-of-rib marker from peer; received end-of-rib marker from all peers None Standby SRP will wait for BGP convergence on next restart access-classThis filter is not currently supported peerThis filter is not currently supported route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported outThis filter is not currently supported

Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

bgpIpv6NextHops
Description Emergency Alert Critical Error Warning Log Notice Log Info BGP indirect next-hops for IPv6 NLRI None None None Errors in BGP IPv6 next hop events and state transitions None State transitions of BGP IPv6 next hops None

Copyright 2011, Juniper Networks, Inc.

39

JunosE 12.1.x System Event Logging Reference Guide

Debug Filter 1 Filter 2

BGP IPv6 indirect next-hop events routerSee description of the bgpRoutes router filter for information about this filter remote-ipv6-addressMatches on the IPv6 address of the BGP indirect next-hop

bgpKeepAlives
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6 BGP keepalive messages None None None None Keepalive message received with unexpected additional data after header Keepalive message received; keepalive message sent None None access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inMatches on traffic coming into the router outMatches on traffic going out of the router

NOTE: Send messages are logged to the bgpKeepAlives log when a message is added to the send queue. A debug message is logged in to the bgpConnections log when the message is actually passed to TCP.

40

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

bgpMessages
Description Emergency Alert Critical Error Warning Log BGP protocol messages None None None None Unknown message type received; invalid field in received message; notification message received or sent; invalid capability length in received ORF capability; invalid capability value in received ORF capability; invalid ORF in received ORF capability; ORF entries exceeded maximum limit in received prefix list Open message received or sent; update message received or sent; route-refresh message received or sent; route-refresh-cisco message received or sent; received ORF capability; received route refresh message with ORF entries None Keepalive message received or sent (Full decode of message logged if verbosity is high)

Notice Log

Info Debug

NOTE: Send messages are logged to the bgpMessages log when a message is added to the send queue. A debug message is logged to the bgpConnections log when the message is actually passed to TCP.

Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inMatches on traffic coming into the router outMatches on traffic going out of the router

Copyright 2011, Juniper Networks, Inc.

41

JunosE 12.1.x System Event Logging Reference Guide

bgpNeighborChanges
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6 BGP neighbor change None None None None None A peer has entered into or left the established state; reason for a session going idle None None access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inThis filter is not currently supported outThis filter is not currently supported

bgpNextHops
Description Emergency Alert Critical Error Warning Log VPN and non-VPN BGP indirect next hops None None None Errors in BGP next hop events and state transitions None

42

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

Notice Log Info Debug Filter 1 Filter 2 Filter 3 Filter 4 Filter 5 Filter 6

State transitions of BGP next hops None BGP indirect next-hop events access-classThis filter is not currently supported peerSee description of the bgpRoutes peer filter for information about this filter route-mapThis filter is not currently supported routerSee description of the bgpRoutes router filter for information about this filter inMatches on traffic coming into the router outMatches on traffic going out of the router

bgpRoutes
Description Emergency Alert Critical Error Warning Log Notice Log BGP routing table updates None None None None Failure to add, remove, or modify BGP route in IP forwarding table BGP route added to, removed from, or modified in the IP forwarding table; aggregate route added to, removed from, or modified in Loc-RIB; network route added to, removed from, or modified in Loc-RIB; best route for internal peers for a given prefix became available; best route for internal peers for a given prefix is no longer available, has changed, or has become available; best route for external peers for a given prefix is no longer available, has changed, or has become available; MPLS base tunnel used to reach an indirect next-hop came up or went down; MPLS stacked tunnel for label came up; indirect next-hop became reachable or unreachable; direct next-hop for an indirect next-hop changed; MPLS tunnel for Inter-AS label came up or went down; route added to L2VPN instance; route deleted from L2VPN instance; route modified for L2VPN instance; -VE device for multihomed local layer 2 site 1 changed from peer to peer2 None

Info

Copyright 2011, Juniper Networks, Inc.

43

JunosE 12.1.x System Event Logging Reference Guide

Debug

Redistributed route added to, removed from, or modified in Loc-RIB; advertisement for a given prefix received; withdraw for a given prefix received; local route-target-filtering route added to or removed from prefix in addressFamily access-class accessClassName [ route-map routeMapName routeMapOptions | filtering-router filteringRouterName filteringRouterOptions | in | out ]

Filter 1

access-classLogs events for traffic that matches a specific access class accessClassName Name of the access class for which you want to log events route-mapLogs events for traffic that matches a specific route map routeMapNameName of route map for which you want to log events routeMapOptionsIn the following formatfiltering-router filteringRouterName filteringRouterOptions | in | out filtering-routerLogs events only if the access class or route map are defined on a specific virtual router filteringRouterNameVirtual router where the access class or route map or both are defined filteringRouterOptionsin | out inMatches on traffic coming into the access class, route map, or virtual router outMatches on traffic sent out of the access class, route map, or virtual router

Filter 2

peer peerIpAddress | peerIpv6Address [ access-class accessClassName accessClassOptions | route-map routeMapName routeMapOptions | filtering-router filteringRouterName filteringRouterOptions | in | out ]

peerLogs events for traffic that matches a specific peer peerIpAddressIP address of the peer for which you want to log events peerIpv6AddressIPv6 address of the peer for which you want to log events access-classLogs events for traffic that matches a specific access class accessClassNameName of the access class for which you want to log events accessClassOptionsIn the following formatfiltering-router filteringRouterName filteringRouterOptions | in | out route-mapLogs events for traffic that matches a specific route map routeMapNameName of route map for which you want to log events routeMapOptionsIn the following formatfiltering-router filteringRouterName filteringRouterOptions | in | out filtering-routerLogs events only if the peer, access class or route map are defined on a specific virtual router

44

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

filteringRouterNameVirtual router where the peer, access class or route map or both are defined filteringRouterOptionsin | out inMatches on traffic coming into the peer, access class, route map, or virtual router outMatches on traffic sent out of the peer, access class, route map, or virtual router

Filter 3

route-map routeMapName [ filtering-router filteringRouterName filteringRouterOptions | in | out ]

route-mapLogs events for traffic that matches a specific route map routeMapNameName of route map for which you want to log events filtering-routerLogs events only if the route map is defined on a specific virtual router filteringRouterNameVirtual router where the route map is defined filteringRouterOptionsin | out inMatches on traffic coming into the route map or virtual router outMatches on traffic sent out of the route map or virtual router

Filter 4

router virtualRouterName [ access-class accessClassName accessClassOptions | route-map routeMapName routeMapOptions | filtering-router filteringRouterName filteringRouterOptions | peer peerIpAddress peerOptions | in | out ]

routerLogs events for traffic on a specific virtual router virtualRouterNameName of virtual router access-classLogs events for traffic that matches a specific access class on the specified router accessClassNameName of the access class for which you want to log events accessClassOptionsIn the following formatroute-map routeMapName routeMapOptions | virtual-router virtualRouterName virtualRouterOptions | in | out route-mapLogs events for traffic that matches a specific route map routeMapNameName of route map for which you want to log events routeMapOptionsIn the following formatvirtual-router virtualRouterName virtualRouterOptions | in | out filtering-routerLogs events only if the access class or route map is defined on a specific virtual router filteringRouterNameVirtual router where the access class or route map is defined filteringRouterOptionsIn the following formatin | out peerLogs events for traffic that matches a specific peer peerIpAddressAddress of the peer for which you want to log events

Copyright 2011, Juniper Networks, Inc.

45

JunosE 12.1.x System Event Logging Reference Guide

peerOptionsIn the following formataccess-class accessClassName accessClassOptions | filtering-router filteringRouterName filteringRouterOptions | route-map routeMapName routeMapOptions | in | out inMatches on traffic coming into the virtual router, access class, or route map outMatches on traffic sent out of the virtual router, access class, or route map

Filter 5 Filter 6

inMatches on traffic coming into the router outMatches on traffic going out of the router

bridge
Description Emergency Alert Critical Error Warning Log Notice Log Info Bridge group configuration None None None Bridge interface, learning, aging, and static MAC address errors Bridge resources (maximum interfaces, memory exhaustion) Bridge group interface location availability, operation status, and MTU changes Bridge group state changes (start, shutdown); bridge interface, learning, aging, and static MAC address modifications Verbose bridge interface, learning, aging, and static MAC address configuration and status None

Debug Filter

bridgeEngine
Description Emergency Alert Critical Error Bridge engine configuration None None None Bridge engine, bridge agent, and bridge interface errors

46

Copyright 2011, Juniper Networks, Inc.

Chapter 4: B Commands

Warning Log Notice Log Info

Bridge engine resources (maximum interfaces, memory exhaustion) Slot status; bridge interface location availability Bridge engine and bridge agent state changes (create, start, stop delete); bridge engine, bridge agent, and bridge interface modifications Verbose bridge engine, bridge agent, and bridge interface configuration and status None

Debug Filter

bridgingMgr
Description Emergency Alert Critical Error Warning Log Bridging manager configuration None None None Bridge mode, bridge group, and subscriber policy errors Bridging manager resources (maximum bridge groups, maximum subscriber policies, memory exhaustion) None Bridging manager operation state changes (init, start, shutdown); bridge mode, bridge group, and subscriber policy modifications Verbose bridge mode, bridge group, and subscriber policy configuration and status None

Notice Log Info

Debug Filter

bulkStats
Description Emergency Alert Critical Bulk statistics collector None None None

Copyright 2011, Juniper Networks, Inc.

47

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log

None Operational failures, such as failed transferreverting to secondary receiver, file full, file creation failure, file deletion failure File full or file nearly full conditions, preparing to send an SNMP trap Status of user configuration commands Tracks performance progress of bulkstats application None

Notice Log Info Debug Filter

48

Copyright 2011, Juniper Networks, Inc.

CHAPTER 5

C Commands

cacGeneral on page 49 cacIntf on page 50 cliCommand on page 50 cliGeneral on page 51 connectionManager on page 51 cops on page 52 copsPr on page 52 coreDump on page 53 ctreeLog on page 53

cacGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter CAC general purpose None None None None Unusual conditions in IGP/CAC interaction None None General debugging info None

Copyright 2011, Juniper Networks, Inc.

49

JunosE 12.1.x System Event Logging Reference Guide

cacIntf
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter CAC interface events None None None None Unusual or failure situations in interface processing None None Interface level debugging info interface interfaceType interfaceSpecifier

interfaceLogs events for a specific interface interfaceTypeType of interface on which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

cliCommand
Description Emergency Alert Critical Error Warning Log CLI commands None None None None None

50

Copyright 2011, Juniper Networks, Inc.

Chapter 5: C Commands

Notice Log Info Debug Filter

All successful CLI configuration commands All unsuccessful CLI configuration commands; all nonconfiguration commands None None

cliGeneral
Description Emergency Alert Critical Error Warning Log CLI general log None None None None CLI command mode from prior release no longer exists; the overridden privilege level command will be discarded None None None None

Notice Log Info Debug Filter

connectionManager
Description Emergency Alert Critical Logging various conditions in the component that manages the chassis fabric. None None 10G and 5G SRP modules onlyDetection that the FPGAs have not been loaded (results in an SRP [and chassis] reset) 10G and 5G SRP modules onlyThat there is not enough bandwidth for a particular board in the system, that connections could not be added in the fabric due to resource limitations (such as memory), that a board was just removed and the resource will not

Error

Copyright 2011, Juniper Networks, Inc.

51

JunosE 12.1.x System Event Logging Reference Guide

be needed when this condition is detected momentarily, or that a connection cannot be closed or a multicast destination cannot be dropped. Warning Log Cannot connect to a particular source or destination address (board may have just been removed) A connection that previously could not be closed has now closed; a multicast destination that previously could not be dropped has now been dropped Various logs to indicate events and transitions for low level diagnosis Various logs to indicate events and transitions for low level diagnosis None

Notice Log

Info Debug Filter

cops
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Common Open Policy Service (COPS) protocol None None None COPS message with bad header, version, length, or client Unexpected socket event COPS layer enabled or disabled; socket remotely closed None COPS session instantiation or removal; COPS connection or socket creation or deletion; keepalive value None

Filter

copsPr
Description Emergency Alert COPS-PR general log None None

52

Copyright 2011, Juniper Networks, Inc.

Chapter 5: C Commands

Critical Error Warning Log

None Error decoding COPS-PR messages received from the SDX program Outstanding COPS-PR pool allocations while attempting to shut down SSC client; temporary resource allocations while sending COPS-PR messages to SDX program None None None None

Notice Log Info Debug Filter

coreDump
Description Emergency Alert Critical Error Warning Log Core dump events None None None Connection errors; file open errors; write failures; core dump failures; transfer errors Core dump configuration changes due to core dump monitor; core dump monitor memory allocation errors Successful line card core dump; core dump attempts; core dump progression; core dump monitor checks; core dump monitor transfer completions; core dump monitor dump file deletion None lcLoader creation; dump request receipt; core dump monitor start; core dump monitor stop None

Notice Log

Info Debug

Filter

ctreeLog
Description Emergency For internal maintenance of IP routes None

Copyright 2011, Juniper Networks, Inc.

53

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error

None None Failure in insertion, deletion, and update of IP routes in internal data structure used to maintain the routes None None None Creation or deletion of an internal data structure None

Warning Log Notice Log Info Debug Filter

54

Copyright 2011, Juniper Networks, Inc.

CHAPTER 6

D Commands

dcm on page 56 dcmEngineGeneral on page 56 debounceEvents on page 57 debounceGeneral on page 57 dhcpCapture on page 58 dhcpExternal on page 58 dhcpExternalEngine on page 59 dhcpGeneral on page 59 dhcpIssuLog on page 60 dhcpLocalClients on page 60 dhcpLocalGeneral on page 61 dhcpLocalHighAvailability on page 61 dhcpLocalPool on page 62 dhcpLocalProtocol on page 62 dhcpOfferLog on page 63 dhcpPbeGeneral on page 64 dhcpProxyGeneral on page 64 dhcpRelayGeneral on page 65 dhcpRelayNvWriterGeneral on page 65 dhcpv6Client on page 66 dhcpv6DemuxGeneral on page 66 dhcpv6LsGeneral on page 67 dismanEventMgr on page 67 dnsGeneralLog on page 68 dosProtection on page 68 ds1 on page 69 ds3 on page 69 dvmrpGeneral on page 70

Copyright 2011, Juniper Networks, Inc.

55

JunosE 12.1.x System Event Logging Reference Guide

dvmrpGracefulRestart on page 71 dvmrpMcastTable on page 72 dvmrpProbeRcv on page 72 dvmrpProbeSent on page 73 dvmrpRtTable on page 73

dcm
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Dynamic Configuration Manager None None None None None None None Schedule engine event; status of dynamic interface creation; receipt of teardown signal for a dynamic interface; no interface adapter to propagate teardown; creation of dynamic PPP interface failed; creation of dynamic PPPoE interface failed None

Filter

dcmEngineGeneral
Description Emergency Alert Critical Error Warning Log Notice Log DCM engine general None None None None None None

56

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Info Debug

None Giving notify credits to line module; receipt of request buffer from line module; starting line module communication session; Ack/Nack dynamic interface creation request None

Filter

debounceEvents
Description Events causing changes to the upper-layer link status based on Ethernet debounce configuration None Debounce preempted; link stabilized to operational up or down status None None None Events causing finite state machine transitions Events not causing finite state machine transitions None None

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

debounceGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Ethernet debounce configuration status log None None None Error in enabling or disabling the debounce timer on the Ethernet interface None Debounce timer enabled or disabled on the Ethernet interface

Copyright 2011, Juniper Networks, Inc.

57

JunosE 12.1.x System Event Logging Reference Guide

Info Debug Filter

None None None

dhcpCapture
Description Emergency Alert Critical Error Warning Log Notice Log Info DHCP packet capture None None None Configuration errors Processing errors (resource exhaustion) None Logged DHCP packets, configured by the ip dhcp-capture command (specify high verbosity for detail) Configuration change details; DHCP discover, offer, request, decline, and ACK/NAK packets on a per-interface basis None

Debug

Filter

dhcpExternal
Description Emergency Alert Critical Error Warning Log Notice Log DHCP external None None None Configuration errors; client processing errors (invalid data) Client processing errors (resource exhaustion) Configuration changes

58

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Info Debug Filter

None Configuration change details; client events None

dhcpExternalEngine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter DHCP external engine None None None Configuration errors; client processing errors (invalid data) None None System events (line cards online/offline) Configuration change details; client events None

dhcpGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info DHCP general None Rvn8 None None None None None

Copyright 2011, Juniper Networks, Inc.

59

JunosE 12.1.x System Event Logging Reference Guide

Debug Filter

DHCP message received None

dhcpIssuLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug DHCP ISSU information None None None Error recreating DHCP ISSU IC shadow and its data structures, followed by an ISSU halt Buffering capacity exceeded between DHCP engine and the driver/ISSU shadow driver None None Normal operation: packet processing events, creation and deletion of DHCP common objects during ISSU None

Filter

dhcpLocalClients
Description Emergency Alert Critical Error DHCP local server clients None None None Cannot find the clients interface; cannot find the client to expire the lease or remove it from the database; trying to expire clients lease or remove it from database with bad IP address; requested MAC address does not match the available address; cannot allocate SDX subscriber information Cannot find the DHCP instance for the client with an expired lease; cannot find the DHCP instance to release the client IP address; secondary DNS without primary DNS configured, using DHCP values; secondary NetBIOS Name Server (NBNS) without primary NBNS configured, using DHCP values

Warning Log

60

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Notice Log Info Debug

None None Removing stale offers to clients and stale clients; adding and removing clients; expiring clients lease; clients transactions with DHCP local server None

Filter

dhcpLocalGeneral
Description Emergency Alert Critical Error Warning Log General DHCP local server None None None Memory allocation failure; cannot find interface location for the UID No DHCP instance to process the received packet; hard limits reached; packet discarded due to no resources DHCP local server not configured; clients session failed to start Client per-interface limit exceeded; client per-interface exceeded condition abated Any log message that indicates the status of the general operation of the DHCP local server; NVS actions; grace period lease state; configuration changes None

Notice Log Info Debug

Filter

NOTE: This category replaces the dhcpLocalServerGeneral category.

dhcpLocalHighAvailability
Description Emergency Alert DHCP local high availability None None

Copyright 2011, Juniper Networks, Inc.

61

JunosE 12.1.x System Event Logging Reference Guide

Critical Error

None Out of resources errors; nonrecoverable software errors during client restoration or mirroring, pool creation/modification; recoverable software errors during modification of existing client Recoverable software errors during client, server or pool configuration; out of resources on new client, server, or pool configuration; timer configuration problems Normal recovery following SRP switch None Normal client, server, pool processing None

Warning Log

Notice Log Info Debug Filter

dhcpLocalPool
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter DHCP local address pool, including normal, linked, and shared pools None Local pool IP address is exhausted (address limit violation) Higher limit of address pool utilization reached None Lower limit of address pool utilization reached; invalid DHCP local address pool attributes None None DHCP local address pool resolution; address allocation None

dhcpLocalProtocol
Description Emergency DHCP local server protocol None

62

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Alert Critical Error

None None Cannot find interface; remote client bind add failed; client failed to decline IP address; client failed to decline a null offered IP address; delete remote client entry failed AAA not responding; SDX program not responding; rediscovering with no IP address allocated; a renewal is received on the line module for an unknown client; secondary DNS without primary DNS configured, using DHCP values; secondary NetBIOS Name Server (NBNS) without primary NBNS configured, using DHCP values; duplicate MAC address detected None None Received packet; transmit packet; authentication status; DHCP local server state transitions interface interfaceType interfaceSpecifier

Warning Log

Notice Log Info Debug

Filter

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

dhcpOfferLog
Description Emergency Alert Critical Error Warning Log DHCP offer selection process log None None None None None

Copyright 2011, Juniper Networks, Inc.

63

JunosE 12.1.x System Event Logging Reference Guide

Notice Log Info Debug Filter

None None Status of the offer selection process None

dhcpPbeGeneral
Description Emergency Alert Critical Error Warning Log Notice Log DHCP Proxy Backend Log None None None Heap exhaustion Failure to send a DHCP message to a client Failure to restore client after reboot or interface change; failure to allocate memory from task-controlled pools None Status of task and DHCP operations None

Info Debug Filter

dhcpProxyGeneral
Description Emergency Alert Critical Error Warning Log DHCP Proxy general None None None None None

64

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Notice Log Info Debug Filter

None None Control flow and key events None

dhcpRelayGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug DHCP Relay general None None None None None Warm start recovery problems (high availability and unified ISSU) None Control flow and key events, packets that are transmitted using the layer 2 unicast feature, status and changes to DHCP relay agent information option and suboptions None

Filter

dhcpRelayNvWriterGeneral
Description Emergency Alert Critical Error Warning Log DHCP host route preservation None None None Out of memory conditions Unexpected unified ISSU signal, removing all NVS and routing table entries at startup, removing routing table entries at startup due to inconsistencies

Copyright 2011, Juniper Networks, Inc.

65

JunosE 12.1.x System Event Logging Reference Guide

Notice Log Info Debug

Removing or adding entries on start up due to inconsistencies None Receiving unified ISSU signal, construction of the writer, saving to NVS, removing router, removing routes, adding routes None

Filter

dhcpv6Client
Description Emergency Alert Critical Error DHCPv6 internal test client events None None None Problems communicating with IPv6; invalid message types received; out-of-memory conditions; serious DHCPv6 protocol state errors; internal errors Minor DHCPv6 protocol errors None None None None

Warning Log Notice Log Info Debug Filter

dhcpv6DemuxGeneral
Description Emergency Alert Critical Error Warning Log DHCPv6 packet demultiplexer events None None None UDP transmit errors, out-of-memory conditions, internal errors Invalid DHCPv6 packet type received

66

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Notice Log Info Debug Filter

None None None None

dhcpv6LsGeneral
Description Emergency Alert Critical Error DHCPv6 local server events None None None Failure to create server (bad router or out of memory); errors encountered while processing ISSU signals or while mirroring Attempt to remove a nonexistent server Failure to create server (IPv6 not licensed); cold/warm restart of DHCPv6 local server; before/after restoring client bindings None Server bind, creation, deletion, unbind, and restoration of bindings post warm SRP switchover; Prefix Allocation Notification: designated prefix is already in use by another client; if ISSU is running on a DHCPv6 local server, ISSU and HA debug messages are logged None

Warning Log Notice Log

Info Debug

Filter

dismanEventMgr
Description Emergency Alert Critical Error Distributed management event manager None None None Configuration errors; Sampling, testing and setting errors

Copyright 2011, Juniper Networks, Inc.

67

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter

Limit maximums reached Trigger values reached Application started; traps activated; sampling information provided None None

dnsGeneralLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug DNS general None None None None Failure to post a message to DNS about the query response from DNS server None None Dump DNS response packet; trace DNS query submission; trace DNS response parsing and processing; trace dropped queries if router is shutting down or DNS disabled in virtual router; trace DNS cache cleanup None

Filter

dosProtection
Description Emergency Alert Critical DoS general None None Suspicious control flows exceed threshold for specific line module; possible distributed DoS attack

68

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Error Warning Log Notice Log

Control flow changed to suspicious. Flow table overflow, protocol (or priority) has transitioned to suspicious Suspicious control flow returned to nonsuspicious protocol (or priority) has transitioned from suspicious Suspicious control flow deleted None None

Info Debug Filter

ds1
Description Emergency Alert Critical Error Warning Log Notice Log DS1 layer None None None None Interface creation or binding failure Failure to bring line module application online; dropped interface state change notification due to lack of resources; discarded stale line module notification Dropped interface state change notification for unknown or removed interface None None

Info Debug Filter

ds3
Description Emergency Alert Critical DS3 layer None None None

Copyright 2011, Juniper Networks, Inc.

69

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log

None Failure to create or bind interface Failure to bring line module application online; dropped interface state change notification due to lack of resources; discarded stale line module notification Dropped interface state change notification for unknown or removed interface None None

Info Debug Filter

dvmrpGeneral
Description Emergency Alert Critical Error DVMRP general None None None Memory allocation errors; bad parameters (internal errors); designated forwarder errors (two for same interface, DoNotForward by no designated forwarder); processing prune errors; graft errors; internal errors; catastrophic RT table errors; management interaction errors; NVS errors Unable to add local route; routeHogCheck; routeLimit Route expiration; pruneProcessing (send or receive); graftAck processing; source group (SG) state information; deletion of an output interface; nbrQuickDelete; nbrReset; nbrTimeOut; error adding neighbor on Route Report Reception Designated forwarder election information; sending graft; timer expired for MulticastEntry; attempting to log duplicate accept filter; external route deleted or added Local address creation or deletion; information about accept filters; dvmrpInterface creation or deletion; sgTimeout information; noMoreOifs info; sg creation information; multicastForwarding enabled or disabled; DvmrpInit; dvmrpEnable/Disable; rpfCallback interface interfaceType interfaceSpecifier

Warning Log Notice Log

Info

Debug

Filter 1

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events

70

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

dvmrpGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter DVMRP graceful restart None None None None None DVMRP graceful restart complete None None None

Copyright 2011, Juniper Networks, Inc.

71

JunosE 12.1.x System Event Logging Reference Guide

dvmrpMcastTable
Description Emergency Alert Critical Error DVMRP multicast table messages None None None Error removing MulticastEntry; adding duplicate MulticastEntry; adding nonexistent MulticastEntry; attempting to send prune to nonexistent neighbor; error deleting MulticastEntry; error adding outgoing interfaces Deleting MulticastEntry with no SG state found; attempting to create MulticastEntry, but unable to do so Creating MulticastEntry rePruning; delOif; add outgoing interface; not adding outgoing interface for some reason; creating sgoiflist; pruneDelayCallback; prune; deleting MulticastEntry None interfaceSee description of the dvmrpGeneral interface filter for information about this filter routerSee description of the dvmrpGeneral router filter for information about this filter

Warning Log

Notice Log Info

Debug Filter 1

Filter 2

dvmrpProbeRcv
Description Emergency Alert Critical Error Warning Log Notice Log DVMRP probe received None None None None None procProbe new neighbor

72

Copyright 2011, Juniper Networks, Inc.

Chapter 6: D Commands

Info Debug Filter 1

None Processing probe (verified has our address in packet); display probe interfaceSee description of the dvmrpGeneral interface filter for information about this filter routerSee description of the dvmrpGeneral router filter for information about this filter

Filter 2

dvmrpProbeSent
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 DVMRP probe sent None None None None None None None Send probe interfaceSee description of the dvmrpGeneral interface filter for information about this filter routerSee description of the dvmrpGeneral router filter for information about this filter

Filter 2

dvmrpRtTable
Description Emergency Alert Critical DVMRP Routing Table None None None

Copyright 2011, Juniper Networks, Inc.

73

JunosE 12.1.x System Event Logging Reference Guide

Error

Route error; router report error; error replacing route after applying accept filter; internal errors Unable to create new route; deleting routing table Error in report packet; adding or replacing local route; ignoring poison on upstream user interface (USIF); deleting all dependent neighbors Processing report; added route from report; declaring ourselves as designated forwarder; route update Delete route; insert route interfaceSee description of the dvmrpGeneral interface filter for information about this filter routerSee description of the dvmrpGeneral router filter for information about this filter

Warning Log Notice Log

Info

Debug Filter 1

Filter 2

74

Copyright 2011, Juniper Networks, Inc.

CHAPTER 7

E Commands

ethernet on page 75 ethernetStateSession on page 75

ethernet
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Ethernet layer None None None None Cannot configure Ethernet interface successfully; memory pool depleted No pool space; can bring interface up Hardware present or not present notification Interface created or deleted None

ethernetStateSession
Description Configuration of the Fast Ethernet management port on the SRP IOA on the E320 router or the E120 router None None None

Emergency Alert Critical

Copyright 2011, Juniper Networks, Inc.

75

JunosE 12.1.x System Event Logging Reference Guide

Error

Configuration errors for duplex mode and speed settings on the Fast Ethernet management port Configuration did not occur for duplex mode and speed on the Fast Ethernet management port None None None None

Warning Log

Notice Log Info Debug Filter

76

Copyright 2011, Juniper Networks, Inc.

CHAPTER 8

F Commands

fileSystem on page 77 flowInspection on page 78 flowInspectionEngine on page 78 flowServicesFirewallAlert on page 79 flowServicesFirewallAudit on page 79 frameRelay on page 80 fsAgent on page 80 ft1 on page 81 ftpClient on page 81 ftpServer on page 82

fileSystem
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter File system None None Configuration consistency check failed; HA/sync may be desabled Error enabling or disabling Missing of invalid armed files Configuration checkerenabled or disabled None Timestamp of last synchronization None

Copyright 2011, Juniper Networks, Inc.

77

JunosE 12.1.x System Event Logging Reference Guide

flowInspection
Description Emergency Alert Critical Error Flow inspection None None None Configuration error for bulk static translations; failure to increase size of translation database; pool range overlap; more DNS queries than can be processed Translation timeout change not applied to existing translations; failure to install translations None Allocation and deallocation of NAT address or NAPT address/port Increase size of translation database; add or remove address pool ranges None

Warning Log

Notice Log Info Debug Filter

flowInspectionEngine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Flow inspection engine None None None None Virtual router not found during deletion request None None Engine creation, timer state information, setCoreLocation notification None

78

Copyright 2011, Juniper Networks, Inc.

Chapter 8: F Commands

flowServicesFirewallAlert
Description Emergency Alert Critical Error Firewall None None None No resources; number of connections has exceeded the specified limit; destination host is blocked or cleared; NAT disallows a connection; no controlling list; bad packet received None Oldest entry deleted; rate of connections has deceased to the specified limit; number of connections has decreased to below the specified limit None None None

Warning Log Notice Log

Info Debug Filter

flowServicesFirewallAudit
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Firewall None None None New connection disallowed None Transition from half-open to fully complete connection; transition to half-open connection None None None

Copyright 2011, Juniper Networks, Inc.

79

JunosE 12.1.x System Event Logging Reference Guide

frameRelay
Description Emergency Alert Critical Error Frame Relay layer None None Failure to bring up the application due to lack of memory resources Summary information about automatic removal of interface or circuit from nonvolatile storage on startup; internal resource pool is too small None Lack of pool space for SNMP traps (it is permissible for SNMP traps to be unreliable); failure to obtain line module configuration on line module insertion Line module insertion and removal information Creation of interfaces or circuits from nonvolatile storage on startup; detailed information about automatic removal of interfaces or circuit from nonvolatile storage on startup; reporting on SNMP traps for interfaces or circuits; engine debug messages None

Warning Log Notice Log

Info Debug

Filter

fsAgent
Description Emergency Alert Critical Error Warning Log Notice Log Info File System Agent None None Previous file system sync failedbooting protected images File system unavailable File transfer initialization failure; unexpected software error None File transfer notification; platform or release mismatch; file transfer error; release file is corrupt; image path not found; insufficient resources to copy release

80

Copyright 2011, Juniper Networks, Inc.

Chapter 8: F Commands

Debug

Status of copy running-config; file transfer status; backup boot-setting configuration notification; subsystem release configuration notification None

Filter

ft1
Description Emergency Alert Critical Error Warning Log Notice Log FT1 layer None None None None Interface creation or binding failure Failure to bring line module application online; dropped interface state change notification due to lack of resources; discarded stale line module notification Dropped interface state change notification for unknown or removed interface None None

Info Debug Filter

ftpClient
Description Emergency Alert Critical Error Warning Log Notice Log FTP client None None None Unexpected results during a transfer None Completion status of a network connection command (example: Succeeded creating data socket )

Copyright 2011, Juniper Networks, Inc.

81

JunosE 12.1.x System Event Logging Reference Guide

Info Debug Filter

Completion status of a user command (example: lS command succeeded ) None None

ftpServer
Description Emergency Alert Critical Error Warning Log Notice Log FTP server None None None Error listening for new client connection; error creating daemon task Error creating new server task; socket write error; error adjusting socket window size Daemon task created; waiting for new client connection; accept client from host a.b.c.d; maximum client sessions exceeded; FTP daemon shutdown complete Starting FTP daemon shutdown Read FTP command None

Info Debug Filter

82

Copyright 2011, Juniper Networks, Inc.

CHAPTER 9

G and H Commands

gplaan on page 83 ha on page 83 hdlc on page 84 hotfixGeneral on page 85 httpServer on page 85

gplaan
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter General purpose locally allocated address notifier None None None Out of resources None Task creation or deletion None Adding or deleting IP addresses; adding or deleting user sessions None

ha
Description Emergency High availability messages None

Copyright 2011, Juniper Networks, Inc.

83

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error

None None Accessing redundancy mode not supported on the standby SRP; changing redundancy mode not supported on the standby SRP; high availability disabled due to state error; error encountered during the transition from one high availability state to another when stateful line module switchover is performed High availability for SRP and line modules disabled due to incompatible release on standby; high availability for SRP and line modules disabled due to user initiated disable High availability for SRP and line modules disabled due to standby down; high availability is now active None None None

Warning Log

Notice Log

Info Debug Filter

hdlc
Description Emergency Alert Critical Error HDLC layer None None None Interface creation failures (interface is not created); interface configuration errors; interface pool failures Interface creation failures during initialization; interface deletion failures (interface is still deleted); interface pool failures (might not cause problems) Interface pool changes Layer initialization messages; interface creation; interface modification; interface deletion Detailed layer initialization; interface creation details; interface deletion details None

Warning Log

Notice Log Info Debug Filter

84

Copyright 2011, Juniper Networks, Inc.

Chapter 9: G and H Commands

hotfixGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Hotfix general None None None Error conditions causing startup hotfix activation to fail Failed to deactivate or disarm a hotfix; attempts to activate incompatible hotfixes Activation or arming of a hotfix None None None

httpServer
Description Emergency Alert Critical Error Embedded HTTP server None None None Failure to enable HTTP daemons (httpd); failure to remove httpd; failure to grow pool of httpds or pool of HTTP connections (httpcs); failure to listen on httpd socket; failure to set TCP socket options; failure to remove TCP socket; failure to queue HTTP event (socket accept, socket approve, socket send, socket receive); failure to queue HTTP event for maximum connection aging; invalid HTTP event Refused HTTP connection due to too many simultaneous connections from same host; refused HTTP connection due to access list deny; failure to perform TCP socket approval; failure to send data on TCP socket None

Warning Log

Notice Log

Copyright 2011, Juniper Networks, Inc.

85

JunosE 12.1.x System Event Logging Reference Guide

Info

Start or stop HTTP process; create or remove httpd; growing a pool of httpds; enable or disable httpd; growing a pool of HTTP connections (httpcs); failure to perform TCP socket accept; growing a pool of HTTP events; updated HTTP scalars; handed out (global/token) address to dhcp-ls client; authentication passed from dhcp-ls for a given client; renewing token address for dhcp-ls client; removed session with dhcp-ls; removed global address through gplaanDelete; dhcp-ls user login/logout/shortcut login; create or remove HTTP interface redirect URL Server self-bind (for example, started HTTP without instantiating any httpd); attempt to remove nonexisting httpd; attempt to reread from NVS; updated httpd; create or remove session with dhcp-ls; bind or unbind with policy table; invalid or valid TCP socket approve or accept; received data from stale socket; create or remove HTTP connection; receive data from httpc; queued HTTP event; aging group of httpcs; added new address at dhcp-ls session; phase 1 of 2 for authentication passed from dhcp-ls for a given client; revoking token address for a given dhcp-ls client None

Debug

Filter

86

Copyright 2011, Juniper Networks, Inc.

CHAPTER 10

I Commands

icImageFixServer on page 88 icmpTraffic on page 89 icmpv6Traffic on page 90 icrPartitionManager on page 90 igmpGeneral on page 91 igmpGracefulRestart on page 92 igmpGroupState on page 93 ikeCertificateMgr on page 93 ikeEnrollment on page 94 ikepki on page 94 interModuleCommunication on page 95 ipAccessList on page 96 ipEngine on page 96 ipEngineering on page 97 ipflowstats on page 97 ipflowstatsEngine on page 98 ipGeneral on page 98 ipIfCreator on page 100 ipInterface on page 100 ipNhopTrackerGeneral on page 101 ipProfileMgr on page 101 ipRoutePolicy on page 102 ipRouteTable on page 102 ipsecIdDb on page 103 ipsecP1Throttler on page 103 ipsecXcfgSM on page 104 ipSubscriberMgr on page 104 ipTraffic on page 105

Copyright 2011, Juniper Networks, Inc.

87

JunosE 12.1.x System Event Logging Reference Guide

ipTunnel on page 105 ipv6AccessList on page 106 ipv6General on page 107 ipv6Interface on page 108 ipv6ProfileMgr on page 108 ipv6RouteTable on page 109 ipv6Traffic on page 110 ipv6Types on page 110 isisAdjChange on page 111 isisAdjPackets on page 112 isisBfdEvents on page 112 isisChecksumErr on page 113 isisGeneral on page 113 isisHelloGeneral on page 114 isisHelloPackets on page 114 isisIpv6Log on page 115 isisLdpEvents on page 116 isisLocalUpdate on page 116 isisMplsTeAdvertisements on page 117 isisMplsTeEvents on page 117 isisNsfEvents on page 118 isisProtocolErr on page 118 isisSnpPackets on page 119 isisSpfEvents on page 119 isisSpfStatistics on page 120 isisSpfTriggers on page 120 isisUpdatePackets on page 121 isVoice on page 121 itm on page 122

icImageFixServer
Description Emergency Alert Critical IC image fix server None None None

88

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Error

Memory allocation failure; ImageFix load failure; manual ImageFix activation failure; ImageFix file errors Buffer allocation failure; unexpected status received in state X Application image up, startup ImageFixes activated; reversion from FC ImageFix to release FC image requires reload of line module; FC ImageFix found for line module State machine change; unexpected internal communication error; loading complete announcement; IC up-to-date following SRP switch; sending ImageFix descriptor to line module Controller state change announcement; board state change announcement; manual ImageFix [de]activation attempt; subsystem announced None

Warning Log Notice Log

Info

Debug

Filter

icmpTraffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 ICMP frame transmit or receive None None None None None None None All ICMP transmit or receive events remote-ip-address ipAddress [ ipAddressMask ]

remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

Filter 2

router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]

Copyright 2011, Juniper Networks, Inc.

89

JunosE 12.1.x System Event Logging Reference Guide

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

icmpv6Traffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 ICMPv6 frame transmit or receive None None None None Packets of unknown types, invalid headers, with header errors None Failures due to checksum errors, unsupported All ICMPv6 transmit or receive events [ remote-ipv6-address ipv6Address ]

remote-ipv6-addressLogs events for packets arriving from or going to a specified IPv6 address ipv6AddressIPv6 address of remote system for which you want to log messages

Filter 2

router virtualRouterName [ address ipv6Address ]

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events addressLogs events on a specific IPv6 address ipv6AddressAddress of remote system for which you want to log messages

icrPartitionManager
Description Interchassis Redundancy Partition Manager

90

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Emergency Alert Critical Error

None None None Errors allocating memory for any ICR activity; Error adding, configuring, removing ICR partitions and other errors during ICR transition. None Delay in changing the state of the ICR partition; Unable to change the state of the ICR partition because of RADIUS access issues. None Successful ICR configuration such as creation and removal of ICR partition ; Addition and removal of ICR group members within partition, PPP, AAA, and Ethernet acknowledgement messages during ICR transitions, and other messages. None

Warning Log Notice Log

Info Debug

Filter

igmpGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IGMP general None None None Nonrecoverable errors NVS errors Errors while configuring or learning groups None IGMP interface or group state change; errors in packet transmit or receive interface interfaceType interfaceSpecifier

interfaceLogs events for a specific interface

Copyright 2011, Juniper Networks, Inc.

91

JunosE 12.1.x System Event Logging Reference Guide

interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

igmpGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IGMP graceful restart None None None None None IGMP/MLD graceful restart complete None None None

92

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

igmpGroupState
Description Emergency Alert Critical Error Warning Log Notice Log Info IGMP group state change events None None None None None None igmp v2 first host join, last host leave events (Release 5.0 and earlier); igmp v3 state change and source-list change events aggregated across all hosts on the interface (Release 5.1.0 and later) None router virtualRouterName [ interface interfaceType interfaceSpecifier ]

Debug Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of the interface for which you want to log events. For example, atm or fastEthernet. interfaceSpecifierLocation of the interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

ikeCertificateMgr
Description Emergency Alert Displays events relating to ERX key generation, certificate status, and certificate processing None None

Copyright 2011, Juniper Networks, Inc.

93

JunosE 12.1.x System Event Logging Reference Guide

Critical Error Warning Log

None Initialization problems Missing ERX private key; public key does not match private key; certificate expired; memory allocation problems; CRL too large; attempt to generate new key pair before deleting old one; key generation problems; problem reading private key Problem decoding certificates; IKE authentication problems related to certificates None Certificate database notifications None

Notice Log Info Debug Filter

ikeEnrollment
Description Emergency Alert Critical Error Warning Log Notice Log Info Displays events relating to certificate enrollment None None None None Identity no set; missing ERX private key; missing CA certificate; enrollment failures None Received CA certificate; received CA and RA certificate chain; received ERX certificate; retry scep poll message Found CA certificate; found ERX certificates; enrollment failure details None

Debug Filter

ikepki
Description Emergency IKE SA negotiation None

94

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Alert Critical Error Warning Log

None None Event occurred that is unexpected for the current state Memory pool growth problems; recoverable state problems; receiving IKE packets for unconfigured peer IKE configuration problemsno preshared keys for peer; recoverable status conditions Number of successful SAs negotiation, both phase 1 and phase 2; unsuccessful phase 1 negotiation information; unsuccessful phase 2 negotiation information Detailed SA negotiation debug information None

Notice Log Info

Debug Filter

interModuleCommunication
Description Emergency Alert Critical Intermodule communication monitoring None None Line module resetting after recovery attempts fail; standby SRP module resetting after monitoring thresholds exceeded; primary SRP module resetting after all line modules fail because of issue with primary SRP module None Line module recovery attempts after monitoring thresholds exceeded Ping monitoring threshold exceeded; ICC session monitoring threshold exceeded; ICC connection monitoring threshold exceeded Intermodule communication monitoring condition, state change, and corresponding action None slot slotNumber

Error Warning Log Notice Log

Info

Debug Filter

slotLogs events for a specific slot

Copyright 2011, Juniper Networks, Inc.

95

JunosE 12.1.x System Event Logging Reference Guide

slotNumberNumber of slot for which you want to log events

ipAccessList
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IP access list matching None None None None None None Access list rule has been matched None accessList

accessListLogs a match on any access-list entry for all access lists

Filter 2

accessList router virtualRouterName access-list accessListName access-element-id idNumber

accessListLogs a match on any access-list entry routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events access-listLogs events for a specific access list accessListNameName of access list for which you want to log events access-element-idLogs events for a specific element ID idNumberElement ID number for which you want to log events; the element ID is automatically assigned for access-list rules that you explicitly create and is shown by issuing the show access-list detail command

ipEngine
Description Emergency IP chassis manager None

96

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Alert Critical Error

None None Failure in operations such as adding, removing, or deleting interfaces or distributing routing tables to line modules Errors such as attempting to configure something that is not supported on a module, or routing table memory is approaching 80 percent full Something unexpected happened; for example, an interface was deleted twice or, internal to the software, connections between IC and SRP were deleted twice Completion status of a user command (for example: IS command succeeded ) An engine or agent that corresponds to a virtual router is added or deleted; an interface is added or deleted None

Warning Log

Notice Log

Info Debug

Filter

ipEngineering
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IP Engineering None None None None None None Notifying AAA about duplicate prefix: profileHandle ( authId: authId, rtr uid: router ) None None

ipflowstats
Description J-Flow statistics

Copyright 2011, Juniper Networks, Inc.

97

JunosE 12.1.x System Event Logging Reference Guide

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None None None Application starting Interfaces become available or unavailable Main and History cache tables are cleared None

ipflowstatsEngine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter J-Flow statistics engine None None None Agents stopping or deleting; memory allocation errors; line module errors Problems bring modules or slots up or down None Agent or master creation; slot or operation state information Creation or removal of engine; initialization problems None

ipGeneral
Description Emergency IP general None

98

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Alert Critical Error

None (IP) Interface stacking management errors (ARP) Allocation of Ethernet next hop failed (IP) Not able to create interface or create address on null 0 interface; undefined IP status code; interface stacking management errors; send and forward failures because of not finding corresponding egress or ingress nodes; conflict in adding hidden routes (IP) NVS load errors; failure to add address on an interface because of low memory None None (ARP) NextHopPool is out of memory and trying to expire old entries; ARP data events (IP) Interface stacking management errors interface interfaceType interfaceSpecifier

Warning Log Notice Log Info Debug

Filter 1

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events. For example, atm or fastEthernet. interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Copyright 2011, Juniper Networks, Inc.

99

JunosE 12.1.x System Event Logging Reference Guide

ipIfCreator
Description Emergency Alert Critical Error IP interface creator events None None None Out of resources failures in midoperation; client application and DCM interaction errors (out-of-range sessionId or enum; unrecognized message type); failure during client callback for interface creation Client session already unbound; unable to process new configuration requests (out of resources) Interface deletion failure in DCM (no client acknowledgement required) None Client interaction during bind or unbind, session creation or shutdown, and interface creation or deletion; DCM interaction during interface creation or deletion None

Warning Log

Notice Log Info Debug

Filter

ipInterface
Description Emergency Alert Critical Error Warning Log IP interface None None None None Error status is returned by lower layer configuration; best route is pointing to an unnumbered interface with an invalid source IP address; unnumbered interface is pointing to invalid loopback interface problems; packets received with invalid source IP address on interfaces None

Notice Log

100

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Info Debug Filter 1 Filter 2

None Interface state transitions and deletions; interface state machine events interfaceSee description of the ipGeneral interface filter for information about this filter routerSee description of the ipGeneral router filter for information about this filter

ipNhopTrackerGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Next-hop tracker for IP shared interfaces None None None Errors in tracking of routes that resolve indirect next hops None None None None None

ipProfileMgr
Description Emergency Alert Critical Error Warning Log Notice Log IP Profile Manager None None None Failure to create or delete dynamic IP interfaces None None

Copyright 2011, Juniper Networks, Inc.

101

JunosE 12.1.x System Event Logging Reference Guide

Info Debug

None Events related to dynamic IP interface creation or deletion; assignment or unassignment of profiles to interfaces None

Filter

ipRoutePolicy
Description Emergency Alert Critical Error IP route policy None None None Failure to clean up NVS while a routing policy was being deleted; failure to store the routing policy to NVS while a new routing policy was being created; failure to find an expected routing policy created previously Failure to create a new routing policy due to memory limitation; misuse of a routing policy None Result of routing policy check; specifies which routing policy is used Successful addition or deletion of routing policies router virtualRouterName

Warning Log Notice Log Info Debug Filter

routerLogs IP route policy events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ipRouteTable
Description Emergency Alert Critical IP routing table None None None

102

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Error

Next-hop resolution-related problems; exceeding maximum route limit or warning threshold Failure to add route None In process of finding best route information Normal routing table updates; next-hop resolution for static routes interfaceSee description of the ipGeneral interface filter for information about this filter routerSee description of the ipGeneral router filter for information about this filter

Warning Log Notice Log Info Debug Filter 1 Filter 2

ipsecIdDb
Description Phase 1 identity database information. Used for deciding which phase 1 identity to use for incoming IKE negotiations. None None None Internal dBase issue with hashes Problems adding or deleting entries None Adding entries to database Detailed database information and transactions None

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

ipsecP1Throttler
Description Emergency Alert Ongoing phase 1 negotiations None None

Copyright 2011, Juniper Networks, Inc.

103

JunosE 12.1.x System Event Logging Reference Guide

Critical Error Warning Log

None None Throttling instances based on suspicious flows (for example, the same peer failing repeated fast negotiations) None None None None

Notice Log Info Debug Filter

ipsecXcfgSM
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Xauth application state machine information. None None None Internal state machine errors State machine unexpected events; problems with xauth negotiations Significant state changes None None None

ipSubscriberMgr
Description Emergency Alert IP Subscriber Manager None None

104

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Critical Error Warning Log Notice Log Info Debug

None Primary interface not found None None None Dump parameters for methods; dump results for lookups; dump points during thread execution; log in of multiple subscribers with the same IP address on different DHCP Local Servers across virtual routers None

Filter

ipTraffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Filter 2 IP frame transmit and receive None None None None Data errors detected in frames Dropped framesNo error None Normal data events interfaceSee description of the ipGeneral interface filter for information about this filter routerSee description of the ipGeneral router filter for information about this filter

ipTunnel
Description Emergency IP tunnel None

Copyright 2011, Juniper Networks, Inc.

105

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None Unexpected but recoverable events No more pool space for interface up notification None Function trace None

ipv6AccessList
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IPv6 access list matching None None None None None None Access list rule has been matched None accessList

accessListLogs a match on any access-list entry for all IPv6 access lists

Filter 2

accessList router virtualRouterName access-list accessListName access-element-id idNumber

accessListLogs a match on any access-list entry routerLogs events for a specific virtual router

106

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

virtualRouterNameName of virtual router for which you want to log events access-listLogs events for a specific access list accessListName Name of access list for which you want to log events access-element-idLogs events for a specific element ID idNumberElement ID number for which you want to log events; the element ID is automatically assigned for access-list rules that you explicitly create and is shown by issuing the show ipv6 access-list detail command

ipv6General
Description Emergency Alert Critical Error IPv6 general None None None License-related errors (for example, attempting to configure IPv6 without configuring the license first); error in sending interface up or down events to IPv6 Primary IPv6 address on an interface is not found None None None interface interfaceType interfaceSpecifier

Warning Log Notice Log Info Debug Filter 1

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

Copyright 2011, Juniper Networks, Inc.

107

JunosE 12.1.x System Event Logging Reference Guide

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

ipv6Interface
Description Emergency Alert Critical Error Warning Log IPv6 interface None None None None Interface configuration errors; errors in pointing interface to another interface; interface LocalAddress-related errors None None Interface state transitions interfaceSee description of the ipv6General interface filter for information about this filter routerSee description of the ipv6General router filter for information about this filter

Notice Log Info Debug Filter 1

Filter 2

ipv6ProfileMgr
Description Emergency IPv6 Profile Manager None

108

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Alert Critical Error Warning Log Notice Log Info Debug

None None Failure to create or delete dynamic IPv6 interfaces None None None Events related to dynamic IPv6 interface creation or deletion; assignment or unassignment of profiles to interfaces None

Filter

ipv6RouteTable
Description Emergency Alert Critical Error IPv6 routing table None None None Next-hop resolution-related problems; exceeding maximum route limit or warning threshold; route add and delete errors Route limitrelated warnings Route limitrelated messages None Normal routing table updates; next-hop resolution for static routes; redistribution events; overload list processing; routing table session creation; route change notification events; route add/delete information; route cleanup events interfaceSee description of the ipv6General interface filter for information about this filter routerSee description of the ipv6General router filter for information about this filter

Warning Log Notice Log Info Debug

Filter 1

Filter 2

Copyright 2011, Juniper Networks, Inc.

109

JunosE 12.1.x System Event Logging Reference Guide

ipv6Traffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IPv6 frame transmit and receive None None None None None None None Normal data events [ router virtualRouterName ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

Filter 2

[ address ipv6Address ]

addressLogs events for packets arriving from or going to a specified IPv6 address ipv6AddressIPv6 address of remote system for which you want to log messages

ipv6Types
Description Emergency Alert Critical IPv6 general None None System out of memory error for allocating IPv6 addresses; IPv6 shutdown started in all virtual routers System low on memory; IPv6 address allocation may fail None

Error Warning Log

110

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Notice Log Info Debug Filter

None None None None

isisAdjChange
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS adjacency up or down None None None None None Adjacency state change None None interface interfaceType interfaceSpecifier

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router

Copyright 2011, Juniper Networks, Inc.

111

JunosE 12.1.x System Event Logging Reference Guide

interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

isisAdjPackets
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS adjacency hello packets None None None None Error in sent IIH or received IIH Sent or received IIH, DR election Authentication failed Detailed information about IIH interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

isisBfdEvents
Description Emergency Alert Critical Error IS-IS and BFD interaction and IS-IS session log None None None BFD to IS-IS interaction failure errors; out of memory errors

112

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Warning Log Notice Log Info Debug Filter

None None BFD session state changes None Router and interface

isisChecksumErr
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS checksum errors None None None None LSP checksum error None None None interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

isisGeneral
Description Emergency Alert Critical IS-IS system notifications None None None

Copyright 2011, Juniper Networks, Inc.

113

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log

Error in restoring NVS Exceeding maximum IP addresses on interface or maximum sequence number Error in redistributing routes; LAN circuit coming up; BGP converged; BGP not converged and IS-IS times out; transient black hole avoidance suppressed because graceful restart has been configured and is in progress None Redistributed routes interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Info Debug Filter 1

Filter 2

isisHelloGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS system notifications None None None Memory failure and other fatal errors Communication failure between IS-IS and IS-IS hello None None Timer expiration and other normal events interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

isisHelloPackets
Description IS-IS hello packets

114

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1

None None None None None None Hello packets sent and received Dumping hello packet in detail interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

isisIpv6Log
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS IPv6 events None None None None None None None IS-IS IPv6 events interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

Copyright 2011, Juniper Networks, Inc.

115

JunosE 12.1.x System Event Logging Reference Guide

isisLdpEvents
Description Displays information about the interactions between LDP and IS-IS in the course of LDP-IGP synchronization. None None None Failure to communicate with LDP and out of memory conditions None None None LDP interactions None

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

isisLocalUpdate
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS local LSP packets None None None None None Sent local LSP None None interfaceSee description of the isisAdjChange interface filter for information about this filter

116

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Filter 2

routerSee description of the isisAdjChange router filter for information about this filter

isisMplsTeAdvertisements
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IS-IS MPLS traffic engineering advertisements None None None None None None None Resource information changes None

isisMplsTeEvents
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IS-IS MPLS traffic engineering None None None None None None Start or stop MPLS function; tunnel in use by IS-IS; explicit route computation Detailed debugging information for MPLS function None

Copyright 2011, Juniper Networks, Inc.

117

JunosE 12.1.x System Event Logging Reference Guide

isisNsfEvents
Description Emergency Alert Critical Error Warning Log Notice Log Info Log events related to IS-IS non-stop forwarding procedure during system warm start None None None None None None Logs IS-IS NSF timer related events (for example, expiration and cancellation of timers [T1, T2, T3]) Restart-request transmit; restart-ack receive; SNP receive processing; LSP synchronization; LSP purging interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Debug

Filter 1

Filter 2

isisProtocolErr
Description Emergency Alert Critical Error Warning Log Notice Log Info IS-IS protocol errors None None None None LSP protocol error None None

118

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Debug Filter

None router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

isisSnpPackets
Description IS-IS complete sequence numbers PDU (CSNP) and partial sequence numbers PDU (PSNP) packets None None None None Error in received CSNP or PSNP Sent PSNP; received CSNP or PSNP packets; PSNP authentication failed Sent CSNP packets; CSNP authentication failed LSP entries interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1

Filter 2

isisSpfEvents
Description Emergency Alert Critical Error IS-IS Shortest Path First (SPF) None None None None

Copyright 2011, Juniper Networks, Inc.

119

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter

None Start or suspend SPF; updating routing table Add tent or path; process LSP; attach bit is ignored for sysid; no automatic default routes Add route router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

isisSpfStatistics
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter IS-IS SPF timing and statistic data None None None None None SPF compute time None None router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

isisSpfTriggers
Description Emergency Alert IS-IS SPF triggering None None

120

Copyright 2011, Juniper Networks, Inc.

Chapter 10: I Commands

Critical Error Warning Log Notice Log Info Debug Filter

None None None SPF trigger event None None router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

isisUpdatePackets
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IS-IS LSP packets sent or received None None None None Error in received LSP Sent or received LSP Authentication failed; processed received LSP Set or cleared SRM flags; building LSP interfaceSee description of the isisAdjChange interface filter for information about this filter routerSee description of the isisAdjChange router filter for information about this filter

Filter 2

isVoice
Description IS Voice application

Copyright 2011, Juniper Networks, Inc.

121

JunosE 12.1.x System Event Logging Reference Guide

Emergency Alert Critical Error Warning Log Notice Log

None None None NVS error; out of resources error; unexpected error IP request failed LSP used by IP circuit changes state (up, down, or modified); IP circuit requested, updated, or removed Voice gateway session established, terminated, or replaced Management get, set, create, and remove None

Info Debug Filter

itm
Description Emergency Alert Critical Error IPSec transport mode None None None IPSec transport protocol interaction failures; interface engine interaction failures; IPSec transport profile configuration errors; interface configuration errors Recoverable IPSec transport interfacerelated configuration and operational error IPSec transport interface state change IPSec transport interface interaction with IKE protocol; interface pool usage Details about the interaction between the IPSec transport interface and the IKE protocol; configuration and operational changes of the IPSec transport interface events; interface engine interaction None

Warning Log Notice Log Info Debug

Filter

122

Copyright 2011, Juniper Networks, Inc.

CHAPTER 11

L Commands

l2cGeneral on page 124 l2cKeepAlive on page 124 l2cPacket on page 125 l2tp on page 125 l2tpDialoutGenerator on page 126 l2tpDisconnectCause on page 126 l2tpIpLowerBinding on page 127 l2tpStateMachine on page 127 lasv6General on page 128 ldpConnect on page 128 ldpGeneral on page 129 ldpGracefulRestart on page 129 ldpHelloMessages on page 130 ldpHelloMgr on page 130 ldpInterface on page 131 ldpMessages on page 132 ldpPeer on page 132 ldpShimInterface on page 133 ldpSocket on page 133 ldpTimer on page 134 ldpVpls on page 135 ldpWorker on page 135 localAddressServerGeneral on page 136 localAuthServer on page 136 localEnableAuthServer on page 137 localLinePassword on page 137

Copyright 2011, Juniper Networks, Inc.

123

JunosE 12.1.x System Event Logging Reference Guide

l2cGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Layer 2 Control application general None None None Signal protocol failures, out of resources errors Signal unexpected but recoverable socket conditions None None Neighbor, socket events None

l2cKeepAlive
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Layer 2 Control adjacency packets None None None None None None None Adjacency protocol packet processing None

124

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

l2cPacket
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Layer 2 Control protocol packets None None None None Signal recoverable, unexpected packet processing failures None None Protocol packet exchange None

l2tp
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Layer 2 Tunneling Protocol None None Nonrecoverable error Configuration error Protocol error; insufficient resources Status change; protocol warnings Protocol operational information Detailed debugging information None

Copyright 2011, Juniper Networks, Inc.

125

JunosE 12.1.x System Event Logging Reference Guide

l2tpDialoutGenerator
Description Emergency Alert Critical Error L2TP dial-out None None None Internal software consistency errors; dial-out service denial because of insufficient resources; dial-out session failure Dial-out NVS consistency errors; restrictions on maximum simultaneous dial-out components None Dial-out resource pool expansion None None

Warning Log

Notice Log Info Debug Filter

l2tpDisconnectCause
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter L2TP disconnect cause None None None None None None Disconnect error code information generated at LAC None None

126

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

l2tpIpLowerBinding
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Lower binding for L2TP and IP None None None Virtual router does not have a configured router ID; virtual router has a null router ID None None None None None

l2tpStateMachine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Layer 2 Tunnel Protocol state machine trace None None None None None None None State machine trace None

Copyright 2011, Juniper Networks, Inc.

127

JunosE 12.1.x System Event Logging Reference Guide

lasv6General
Description Emergency Alert Critical Error IPv6 local address pool details None None None Error in configuration of the command for IPv6 local address pool or runtime errors, if any, that occur None LASv6 warm restart complete None Detailed debugging information to assist in troubleshooting and analyzing problems None

Warning Log Notice Log Info Debug Filter

ldpConnect
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter LDP connection information None None None Memory allocation failure. None LDP connection creation and deletion information None None router virtualRouterName

128

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Label Distribution Protocol general events None None None Memory allocation failures; protocol interaction failures Message processing errors Interface transition; adjacency transition Minor timer processing error LDP finite state machine transactions; RouteTable interaction transaction; message processing transaction router virtualRouterName

Filter

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log LDP graceful restart events None None None None None LDP Neighbor Graceful Restart state changes

Copyright 2011, Juniper Networks, Inc.

129

JunosE 12.1.x System Event Logging Reference Guide

Info Debug Filter

LDP Graceful Restart timer operation LDP Graceful Restart debug message router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpHelloMessages
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Label Distribution Protocol hello message event None None None None LDP hello message processing errors LDP hello message reception and transmission LDP hello message processing and transmission transaction LDP hello message processing and transmission transaction details router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpHelloMgr
Description Emergency Alert Critical Error Displays details about the task dedicated for sending LDP hellos, the LDP hello manager None None None Memory allocation failure

130

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

Warning Log Notice Log Info Debug Filter

None Hello transmission failure due to interface down None Hello transmission debug information router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpInterface
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter LDP interface None None None Failure to enable LDP on the interface None Interface up and interface down events None Event with detailed interface parameters for normal operation router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Copyright 2011, Juniper Networks, Inc.

131

JunosE 12.1.x System Event Logging Reference Guide

ldpMessages
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Label Distribution Protocol session message events None None None None None Minor TCP transmission error LDP session message processing and transmission transaction None router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpPeer
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug LDP peer events None None None LDP neighbor authentication setting failure None LDP neighbor authentication transaction None LDP peer maintenance transaction

132

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

Filter

router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpShimInterface
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter LDP shim interface None None None None None None None None router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

ldpSocket
Description Displays details about the socket that is used to exchange LDP session messages and keep alives None

Emergency

Copyright 2011, Juniper Networks, Inc.

133

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None Memory allocation failure Socket creation failure Socket creation and deletion information None Socket send and receive information router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpTimer
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Displays details about LDP timer events; when a timer expires or is scheduled None None None None None None None Timer event information router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

134

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

ldpVpls
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Displays details about LDP signaling for VPLS configurations None None None None VPLS failure VPLS up and down state information None VPLS debug information router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ldpWorker
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Displays details about the background LDP jobs (LDP worker events) None None None Memory allocation failure Invalid PDU Worker creation and deletion information TCP socket reset by peer Worker running information

Copyright 2011, Juniper Networks, Inc.

135

JunosE 12.1.x System Event Logging Reference Guide

Filter

router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

localAddressServerGeneral
Description Emergency Alert Critical Error Warning Log LAS general None None None None Attempts to set a local pool group name; attempts to restore an overlapping address range from a previous version of the software Attempts to allocate an address from the backup local address pool group name because all the addresses in the primary local address pool group have been already allocated. None Control flow and key events None

Notice Log

Info Debug Filter

localAuthServer
Description Emergency Alert Critical Error Local authentication server None None None Cannot bind to local authentication server; memory cannot be allocated for local authentication server; cannot send configuration request; cannot send information request; invalid virtual router; error with specified user database; cannot create local user database at startup

136

Copyright 2011, Juniper Networks, Inc.

Chapter 11: L Commands

Warning Log

Internal AAA user profile missing; cannot create users at startup; user associated with invalid virtual router; users reassigned to default user database; invalid user database; cannot associate users with virtual router None None Server started; server bind occurred; no user name provided; no CHAP challenge provided; no authenticate request message allocated None

Notice Log Info Debug

Filter

localEnableAuthServer
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Authentication server using locally stored enable secret None None None None Connection granted: no secrets are configured None None Authentication attempted; no memory for protocol message; connection granted: correct password; connection denied: incorrect password None

Filter

localLinePassword
Description Emergency Alert Critical Local line password authentication server None None None

Copyright 2011, Juniper Networks, Inc.

137

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log Info Debug Filter

Unknown algorithm for local password Connection granted or denied due to possible misconfiguration None None Connection granted or denied due to incorrect password None

138

Copyright 2011, Juniper Networks, Inc.

CHAPTER 12

M Commands

macroData on page 140 macroSchedular on page 140 mgtmGeneral on page 141 mgtmGracefulRestart on page 142 mgtmv6General on page 142 mgtmv6GracefulRestart on page 143 mldGeneral on page 144 mldGracefulRestart on page 145 mldGroupState on page 145 mmcd on page 146 mobileIpv4HaBinding on page 146 mobileIpv4HaEng on page 147 mobileIpv4HaEvent on page 147 mobileIpv4HaLog on page 148 mplsFwdTable on page 148 mplsGeneral on page 149 mplsHighAvailability on page 149 mplsMajorInterface on page 150 mplsMinorInterface on page 151 mplsRouter on page 152 mplsShimInterface on page 152 mplsTraffic on page 153 mrInfoLog on page 153 mrInfoRcvdLog on page 154 mrInfoSentLog on page 154 mtraceLog on page 155 mtraceRcvdLog on page 155

Copyright 2011, Juniper Networks, Inc.

139

JunosE 12.1.x System Event Logging Reference Guide

mtraceSentLog on page 156 multicastTraffic on page 156

macroData
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Macro information None None None Error while running the macro None Data from env.setResults None None None

macroSchedular
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Macro information None None None Scheduled macro cannot be run None Start and completion of scheduled macro, Values set using env.setResult None None None

140

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

mgtmGeneral
Description Emergency Alert Critical Error Warning Log Notice Log IP multicast group table manager general information None None None Major errors in MGTM API calls resulting in failure IP Multicast fastpath forwarding not supported on interface Errors in MGTM API calls; CAC limit exceeded on join/outgoing interface/port resulting in blocking of the join interface State change events; invalid parameters in API calls (Source, Group) entries not found interface interfaceType interfaceSpecifier

Info Debug Filter 1

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Copyright 2011, Juniper Networks, Inc.

141

JunosE 12.1.x System Event Logging Reference Guide

mgtmGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter MGTM graceful restart None None None None None Multicast graceful restart complete None IGMP, PIM, IP route table multicast graceful restart complete None

mgtmv6General
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 IPv6 multicast group table manager general information None None None Major errors in MGTM API calls resulting in failure IPv6 Multicast fastpath forwarding not supported on interface Errors in MGTM API calls State change events; invalid parameters in API calls (Source, Group) entries not found interface interfaceType interfaceSpecifier

interfaceLogs events for a specific interface

142

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

mgtmv6GracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter MGTM V6 graceful restart None None None None None Multicast graceful restart complete None IGMP, PIM, IP route table multicast graceful restart complete None

Copyright 2011, Juniper Networks, Inc.

143

JunosE 12.1.x System Event Logging Reference Guide

mldGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Multicast Listener Discovery (MLD) general None None None Nonrecoverable errors NVS errors Errors while configuring or learning groups None MLD interface or group state change interface interfaceType interfaceSpecifier

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

144

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

mldGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter MLD graceful restart None None None None None IGMP/MLD graceful restart complete None None None

mldGroupState
Description Emergency Alert Critical Error Warning Log Notice Log Info Multicast Listener Discovery (MLD) group state change events None None None None None None MLDv1 first host join, last host done events; MLDv2 state change and source-list change events aggregated across all hosts on the interface None router virtualRouterName [ interface interfaceType interfaceSpecifier ]

Debug Filter

Copyright 2011, Juniper Networks, Inc.

145

JunosE 12.1.x System Event Logging Reference Guide

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeThe type of the interface for which you want to log events. For example, atm or fastEthernet. interfaceSpecifierThe location of the interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

mmcd
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter MMC switch fabric driver None None None Errors in hardware configuration; resource limitation in fabric reached; errors in hardware None None None Initialization details; configuration details; connection status details None

mobileIpv4HaBinding
Description Emergency Alert Critical Mobile IPv4 home agent binding None None None

146

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

Error

Registration request (RRQ) from foreign agent is prohibited by host access control list (ACL) None None None Mobile IP timer started for n seconds, where n is the number of seconds None

Warning Log Notice Log Info Debug Filter

mobileIpv4HaEng
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Mobile IPv4 home agent engineering None None None Home agent does not exist in the virtual router None Mobile IP warm restart initiated None Verifying replay attack None

mobileIpv4HaEvent
Description Emergency Alert Critical Mobile IPv4 home agent events None None None

Copyright 2011, Juniper Networks, Inc.

147

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log Info Debug Filter

Authentication check failed None None None Authentication check succeeded None

mobileIpv4HaLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Mobile IPv4 home agent log None None None Registration request sanity check failed None Home agent deactivated in virtual router Home agent activated in virtual router Authentication, authorization, and accounting (AAA) granted None

mplsFwdTable
Description Emergency Alert Critical Error MPLS fowarding table events None None None Nonfatal internal errors

148

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

Warning Log Notice Log Info Debug Filter

Minor nonfatal internal errors None None Addition, deletion, and modification of table entries router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

mplsGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug MPLS general purpose None None None Nonfatal internal errors; configuration errors Major interface deletion; minor internal errors None NVS operations NVS operations; timer operations; minor interface label stacking; function flows; L2VPN instance created, destroyed router virtualRouterName

Filter

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

mplsHighAvailability
Description Emergency MPLS high availability events None

Copyright 2011, Juniper Networks, Inc.

149

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info

None None Nonfatal internal errors Minor nonfatal internal errors None Recovery of state information from NVS and mirrored storage; high-availability interactions with MPLS signaling protocols and line cards (major events) High-availability interactions with MPLS signaling protocols and line modules (minor events) None

Debug

Filter

mplsMajorInterface
Description Emergency Alert Critical Error MPLS major interface None None None Signaling protocol interaction failures; major interface engine interaction failures; major interface finite state machine bad state transitions; major interface configuration errors; LSM interface label space interaction failures None None None Major interface finite state machine transitions; signaling protocol interaction; major interface to engine transactions; major interface configuration transactions; LSM interface label space transactions router virtualRouterName [ interface interfaceType interfaceSpecifier]

Warning Log Notice Log Info Debug

Filter

150

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

mplsMinorInterface
Description Emergency Alert Critical Error MPLS minor interface None None None Tunnel/LSP setup or teardown signaling protocol interaction failures; minor interface engine interaction failures; minor interface finite state machine bad state transitions; minor interface configuration errors; minor interface to IP interaction failures None None None Minor interface to engine transactions; minor interface to IP transactions; minor interface configuration transactions; signaling protocol LSP setup or teardown transactions; minor interface finite state machine transitions interface interfaceType interfaceSpecifier

Warning Log Notice Log Info Debug

Filter 1

interfaceLogs events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Copyright 2011, Juniper Networks, Inc.

151

JunosE 12.1.x System Event Logging Reference Guide

Filter 2

router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

mplsRouter
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter MPLS router events None None None Nonfatal internal errors Minor nonfatal internal errors None Creation or removal of MPLS router Configuration changes for per-VR attributes; dynamic interface creation events None

mplsShimInterface
Description Emergency Alert Critical Error MPLS Shim Interface events None None None Signaling protocol interaction failures; shim interface engine interaction failures; shim interface finite state machine bad state transitions; shim interface configuration errors None None None

Warning Log Notice Log Info

152

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

Debug

Shim interface finite state machine transitions; signaling protocol interaction; shim interface to engine transactions; shim interface configuration transactions router virtualRouterName [interface interfaceType interfaceSpecifier ]

Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of the interface for which you want to log events. For example, atm. interfaceSpecifierLocation of the interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

mplsTraffic
Description Logging for MPLS slow-path, ping, and trace packets; MPLS packets exceptioned to the SRP module for any reason None None None None MPLS packets discarded on transmit or receive for any reason None Abnormal conditions encountered during MPLS packet processing (when packets are not discarded); for example, truncating a packet or ignoring packet fields Detailed debugging information for all MPLS packets transmitted to and received from the SRP module None

Emergency Alert Critical Error Warning Log Notice Log Info

Debug

Filter

mrInfoLog
Description General multicast router information

Copyright 2011, Juniper Networks, Inc.

153

JunosE 12.1.x System Event Logging Reference Guide

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None Application startup or shutdown failures, resource allocation failures None Protocol Errors on received packets None Trace application startup/shutdown/operation None

mrInfoRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Multicast router received information None None None None None None Number of trace packets received Hexidecimal dump of packets received None

mrInfoSentLog
Description Emergency Multicast router sent information None

154

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None None None Number of trace packets sent Hexidecimal dump of packets sent None

mtraceLog
Description Emergency Alert Critical Error General Mtrace server information None None None Error creating or deleting Mtrace server; error communicating with other modules; allocation failures None Error in received or sent mtrace packets None Creation or deletion of Mtrace server; communication with other modules None

Warning Log Notice Log Info Debug Filter

mtraceRcvdLog
Description Emergency mtrace packets received None

Copyright 2011, Juniper Networks, Inc.

155

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None None None Short description of the received mtrace packets Complete print of the received mtrace packets None

mtraceSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter mtrace packets sent None None None None None None Short description of the mtrace packets sent Complete print of the mtrace packets sent None

multicastTraffic
Description Emergency Alert IP multicast frame transmit or receive None None

156

Copyright 2011, Juniper Networks, Inc.

Chapter 12: M Commands

Critical Error Warning Log Notice Log Info Debug Filter 1

None None None None None IP multicast packet transmit or receive information remote-ip-address ipAddress [ ipAddressMask ]

remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

Filter 2

router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

Copyright 2011, Juniper Networks, Inc.

157

JunosE 12.1.x System Event Logging Reference Guide

158

Copyright 2011, Juniper Networks, Inc.

CHAPTER 13

N Commands

nameResolverLog on page 159 nfsClient on page 159 noneAaaAddrServer on page 160 noneAaaServer on page 160 ntpGeneral on page 161

nameResolverLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Name resolver table None None None None None None Name lookup failures Name lookup processing events None

nfsClient
Description Emergency NFS client log None

Copyright 2011, Juniper Networks, Inc.

159

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error

None None Error installing NFS driver; error mounting or unmounting remote file system with specific error indication (if known); error accessing file on remote file system Attempting to reuse already used local mount point when mounting remote file system; attempting to unmount remote file system with outstanding open files None NFS client driver installed or uninstalled; mounting or unmounting remote file system; opening or closing remote files None None

Warning Log

Notice Log Info

Debug Filter

noneAaaAddrServer
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter AAA address client None None None None None None None Notification of automatic success response to address request None

noneAaaServer
Description Authentication and accounting client

160

Copyright 2011, Juniper Networks, Inc.

Chapter 13: N Commands

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None None None None None Notification of automatic success response to authentication or accounting request None

ntpGeneral
Description Emergency Alert Critical Error Network Time Protocol (NTP) system notifications None None None NVS configuration errors; insufficient memory resources; protocol errors; time adjustment failures No usable servers, NTP synchronization lost System time adjustment Attach to or detach from virtual router; shutting down NTP IP session; shutting down NTP UDP session; enable or disable NTP; connection established with NTP server; announce system clock precision None router ID

Warning Log Notice Log Info

Debug Filter

Copyright 2011, Juniper Networks, Inc.

161

JunosE 12.1.x System Event Logging Reference Guide

162

Copyright 2011, Juniper Networks, Inc.

CHAPTER 14

O Commands

oam3ahAssociations on page 164 oam3ahEvents on page 164 oam3ahPdus on page 165 os on page 165 ospfElectDr on page 166 ospfGeneral on page 167 ospfHelloPktsRcvd on page 168 ospfHelloPktsSent on page 169 ospfInterface on page 170 ospfLdpEvents on page 170 ospfLsa on page 171 ospfNeighbor on page 171 ospfPktsRcvd on page 172 ospfPktsSent on page 172 ospfRestart on page 173 ospfRoute on page 174 ospfSpfExt on page 174 ospfSpfInter on page 175 ospfSpfIntra on page 175 ospfTeDatabase on page 176 ospfTeSpf on page 176 ospfv3ElectDr on page 177 ospfv3General on page 178 ospfv3HelloPktsRcvd on page 179 ospfv3HelloPktsSent on page 179 ospfv3Interface on page 180 ospfV3Lsa on page 181 ospfv3Neighbor on page 181

Copyright 2011, Juniper Networks, Inc.

163

JunosE 12.1.x System Event Logging Reference Guide

ospfv3PktsRcvd on page 182 ospfv3PktsSent on page 183 ospfv3Route on page 183 ospfV3SpfExt on page 184 ospfV3SpfInter on page 184 ospfV3SpfIntra on page 185

oam3ahAssociations
Description 802.3ah OAM association details for link-fault management between a local and remote OAM peer None OAM association with the remote peer is lost None None None The MAC address of the peer identified during the discovery process None None None

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter

oam3ahEvents
Description Emergency Alert 802.3 OAM link-fault management event details about problems detected on the link None Link is disabled because the high threshold for an error is exceeded on the Ethernet OAM interface or because of the error-disable action specified to be performed in response to an OAM PDU received from a remote peer for a fault in the receive path of the link None Link is disabled because the high threshold for an error is exceeded on the Ethernet OAM interface or because of the error-disable action specified to be performed in response to an OAM PDU received from a remote peer for a fault in the receive path of the link

Critical Error

164

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Warning Log Notice Log Info Debug Filter

None None None None None

oam3ahPdus
Description Emergency Alert 802.3ah OAM protocol data units (PDUs) configuration log None Dying gasp or critical event flags set in the Event Notification PDUs sent from the remote peer to the local OAM entity None None Unsupported OAM PDUs, with the code number, received from the remote peer Event Notification, Variable Request, Variable Response, Loopback Control, Organization-Specific OAM PDUs transmitted from the local entity and received from the remote peer None Informational messages sent from the local entity and received on the local interface from the remote peer None

Critical Error Warning Log Notice Log

Info Debug

Filter

os
Description Emergency Alert Operating system (including image loader) None Fatal software error notification (assertions, panics, exceptions); panic timer expiration; ECC memory errors System halt; NVS reverting to factory defaults

Critical

Copyright 2011, Juniper Networks, Inc.

165

JunosE 12.1.x System Event Logging Reference Guide

Error

File system errors; image checksum failure; POST test failure; unexpected software error; scheduled reload cancelled due to ongoing NVS flush; image not found or invalid; core dump host connect failure; SRP synchronization failure notification; I/O module mismatch or missing; NVS configuration errors OsTask client failed to initialize; file system capacity low (15%); heap utilization high (85%); crash dump save failure; unknown reset type; image loader failures (will retry); boot ROM programming failure; hardware upgrade necessary notification; NVS config file read or write errors; release file invalid OsAppRegistrar client names; OsAppRegistrar state change; version display; last reset type; file system condition abatement; POST start or done; NVS config file initialized or converted; scheduled reload notification; heap utilization abatement (75%); file system release file copy notification; erasing boot ROM notification; core dump notification and status; NVS config boot status (factory defaults, running, file) Image loader request; image loader success; SC-srpIc mailbox client up; POST test passed; NVS config cache enable, disable, flush, or termination; release path notification; diag-level diagnostic feature is also applicable to standby SRP High-frequency debug messages (enabled with various build defines); cached file hit, miss, or close; image loader frame retry; NVS config cache flush status None

Warning Log

Notice Log

Info

Debug

Filter

ospfElectDr
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug OSPF designated router (DR) election None None None None None DR election events None None

166

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Filter 1

interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ]

interface-ip-addressLogs events for a specific interface ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of the unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ] ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interface-ip-addressLogs events for a specific interface on the virtual router ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of the unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

ospfGeneral
Description Emergency Alert Critical OSPF general None None None

Copyright 2011, Juniper Networks, Inc.

167

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log

Error enabling or disabling OSPF; allocation errors State change errors (for example, OSPF could not be enabled); errors creating or destroying an area, an OSPF range, or a virtual link; error enabling OSPF protocol OSPF enabled or disabled; BFD enabled or disable on an OSPF interface Event for a dynamic neighbor Bouncing adjacency with a neighbor interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Notice Log Info Debug Filter 1

Filter 2

ospfHelloPktsRcvd
Description Emergency Alert Critical Error Warning Log Processing of hello messages received on OSPF-enabled interfaces None None None None Invalid packet, hello parameters mismatch (area, network, hello and dead intervals, version, md5 digest) None None Received hello information (ip source/destination, length) router virtualRouterName [ interface interfaceType interfaceSpecifier ]

Notice Log Info Debug Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific OSPF-enabled interface on the virtual router

168

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

interfaceTypeType of the interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifierLocation of the interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

ospfHelloPktsSent
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Sending of hello messages on OSPF-enabled interfaces None None None None None None None Information about hello messages sent on OSPF-enabled interfaces (ip source/destination, length) router virtualRouterName [interface interfaceType interfaceSpecifier ]

Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific OSPF-enabled interface on the virtual router interfaceTypeType of the interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifierLocation of the interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Copyright 2011, Juniper Networks, Inc.

169

JunosE 12.1.x System Event Logging Reference Guide

ospfInterface
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 OSPF interface None None None Error saving or restoring OSPF interface configuration Errors for packets sent or received over the OSPF interface Creation or deletion of OSPF interfaces None None interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfLdpEvents
Description Displays information about the interactions between LDP and OSPF in the course of LDP-IGP synchronization. None None None Failure to communicate with LDP and out of memory conditions None None None LDP interactions

Emergency Alert Critical Error Warning Log Notice Log Info Debug

170

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Filter

None

ospfLsa
Description Emergency Alert Critical Error Warning Log Notice Log OSPF link-state advertisement (LSA) events None None None None LSA discard errors LSA add, update, or delete events; LSA purge, refresh, and max-age events; LSA send and receive events (Ack, delayed Ack, retransmit) None None neighbor neighborIpAddress

Info Debug Filter 1

neighborLogs events associated with a specific neighbor neighborIpAddressIP address of neighbor for which you want to log events

Filter 2

router virtualRouterName [ neighbor neighborIpAddress ]

routerLogs events on a specific virtual router virtualRouterNameVirtual router on which you want to log events neighborLogs events associated with a specific neighbor neighborIpAddressIP address of neighbor for which you want to log events

ospfNeighbor
Description Emergency Alert Critical OSPF neighbor change None None None

Copyright 2011, Juniper Networks, Inc.

171

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log

Neighbor MTU negotiation rejects Flooding event errors; neighbor transition from Full state to Down state; invalid neighbor LSA requests; neighbor MTU negotiation mismatches Database description neighbor exchange; neighbor state changes; neighbor retransmissions None None neighborSee description of the ospfLsa neighbor filter for information about this filter routerSee description of the ospfLsa router filter for information about this filter

Notice Log

Info Debug Filter 1 Filter 2

ospfPktsRcvd
Description Emergency Alert Critical Error Warning Log Notice Log OSPF packet received None None None None Packets discarded; validation errors Number of LSAs packed in different packet types (LSA Ack, LSA update); packets received over Down interface None Packets received description interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Info Debug Filter 1

Filter 2

ospfPktsSent
Description OSPF packet sent

172

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1

None None None Packet sent errors (for example, dropped OSPF packets) None Number of LSAs packed in different packet types (LSA Ack, LSA update) None Packets sent description interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info OSPF graceful restart events None None None Unexpected events during restart None None General information about significant restart operation events (for example, restart entry, exit, abort, and neighbor acquisition) Details about restart operation events routerSee description of the ospfElectDr router filter for information about this filter

Debug Filter

Copyright 2011, Juniper Networks, Inc.

173

JunosE 12.1.x System Event Logging Reference Guide

ospfRoute
Description Emergency Alert Critical Error Warning Log Notice Log Info OSPF route None None None OSPF route addition, deletion, or replacement errors in the routing table Errors for routes imported into OSPF Forwarding address decision algorithm events OSPF route added to, replaced, or deleted from the routing table; route imported into OSPF None interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Debug Filter 1

Filter 2

ospfSpfExt
Description Emergency Alert Critical Error OSPF SPF external calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) None SPF (Dijkstra Shortest Path First algorithm) chunking events (for example, number of LSAs processed in an SPF chunk) SPF results

Warning Log Notice Log

Info

174

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Debug Filter 1

Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfSpfInter
Description Emergency Alert Critical Error OSPF SPF interarea calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) None SPF chunking events (for example, number of LSAs processed in an SPF chunk) SPF results Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Warning Log Notice Log Info Debug Filter 1

Filter 2

ospfSpfIntra
Description Emergency Alert Critical Error OSPF SPF intra-area calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH)

Copyright 2011, Juniper Networks, Inc.

175

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter 1

None SPF chunking events (for example, number of LSAs processed in an SPF chunk) SPF results Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfTeDatabase
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter OSPF traffic engineering database None None None Error in adding, deleting, or updating a record in the TE database None None General information about a record being added, deleted, or updated in the TE database None router name virtualRouterName

router nameLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ospfTeSpf
Description Emergency Alert OSPF traffic engineering SPF None None

176

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Critical Error Warning Log Notice Log

None Any error in constrained SPF calculation None information about explicit path found as a result of TE SPF; information about type of failure in finding a constrained path None None router name virtualRouterName

Info Debug Filter

router nameLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ospfv3ElectDr
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 OSPFv3 designated router (DR) election None None None None None DR election events None None interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ]

interface-ip-addressLogs events for a specific interface ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events

Copyright 2011, Juniper Networks, Inc.

177

JunosE 12.1.x System Event Logging Reference Guide

unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of the unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ] ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interface-ip-addressLogs events for a specific interface on the virtual router ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of the unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide, .

ospfv3General
Description Emergency Alert Critical Error Warning Log OSPFv3 general None None None Error enabling or disabling OSPFv3; allocation errors State change errors (for example, OSPFv3 could not be enabled); errors creating or destroying an area, an OSPFv3 range, or a virtual link OSPFv3 enabled or disabled; BFD enabled or disable on an OSPF interface

Notice Log

178

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Info Debug Filter 1

None None interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfv3HelloPktsRcvd
Description Emergency Alert Critical Error Warning Log Processing of hello messages received on OSPFv3-enabled interfaces None None None None Invalid packet, hello parameters mismatch (area, network, hello and dead intervals, version, md5 digest) None None Received hello information (ip source/destination, length) router virtualRouterName [interface interfaceType interfaceSpecifier ]

Notice Log Info Debug Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific OSPFv3-enabled interface on the virtual router interfaceTypeType of the interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifierLocation of the interface in the appropriate format

ospfv3HelloPktsSent
Description Emergency Sending of hello messages on OSPFv3-enabled interfaces None

Copyright 2011, Juniper Networks, Inc.

179

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug

None None None None None None Information about hello messages sent on OSPFv3-enabled interfaces (ip source/destination, length) router virtualRouterName [ interface interfaceType interfaceSpecifier ]

Filter

routerLogs events for a specific virtual router virtualRouterNameName of the virtual router for which you want to log events interfaceLogs events on a specific OSPFv3-enabled interface on the virtual router interfaceTypeType of the interface for which you want to log events (for example, atm or fastEthernet) interfaceSpecifierLocation of the interface in the appropriate format

ospfv3Interface
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug OSPFv3 interface None None None Error saving or restoring OSPFv3 interface configuration Errors for packets sent or received over the OSPFv3 interface Creation or deletion of OSPFv3 interfaces None None

180

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Filter 1

interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfV3Lsa
Description Emergency Alert Critical Error Warning Log Notice Log OSPFv3 link-state advertisement (LSA) events None None None None LSA discard errors LSA add, update, or delete events; LSA purge, refresh, and max-age events; LSA send and receive events (Ack, delayed Ack, retransmit) None None neighbor neighborIpAddress

Info Debug Filter 1

neighborLogs events associated with a specific neighbor neighborIpAddressIP address of neighbor for which you want to log events

Filter 2

router virtualRouterName [ neighbor neighborIpAddress ]

routerLogs events on a specific virtual router virtualRouterNameVirtual router on which you want to log events neighborLogs events associated with a specific neighbor neighborIpAddressIP address of neighbor for which you want to log events

ospfv3Neighbor
Description Emergency Alert OSPFv3 neighbor change None None

Copyright 2011, Juniper Networks, Inc.

181

JunosE 12.1.x System Event Logging Reference Guide

Critical Error Warning Log

None Neighbor MTU negotiation rejects Flooding event errors; neighbor transition from Full state to Down state; invalid neighbor LSA requests; neighbor MTU negotiation mismatches; disregarding graceful restart notification (when graceful restart helper mode is not configured and the router gets a Grace LSA from a neighbor); aborting graceful restart due to time out (when the Grace LSA expires before the neighbor exited graceful restart); aborting graceful restart help due to topology change Database description neighbor exchange; neighbor state changes; neighbor retransmissions None Router exits graceful restart; helping router with graceful restart neighborSee description of the ospfLsa neighbor filter for information about this filter routerSee description of the ospfLsa router filter for information about this filter

Notice Log

Info Debug Filter 1 Filter 2

ospfv3PktsRcvd
Description Emergency Alert Critical Error Warning Log Notice Log OSPFv3 packet received None None None None Packets discarded; validation errors Number of LSAs packed in different packet types (LSA Ack, LSA update); packets received over Down interface None Packets received description interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter

Info Debug Filter 1

182

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Filter 2

routerSee description of the ospfElectDr router filter for information about this filter

ospfv3PktsSent
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 OSPFv3 packet sent None None None Packet sent errors (for example, dropped OSPF packets) None Number of LSAs packed in different packet types (LSA Ack, LSA update) None Packets sent description interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfv3Route
Description Emergency Alert Critical Error Warning Log Notice Log Info OSPF route None None None OSPF route addition, deletion, or replacement errors in the routing table Errors for routes imported into OSPF Forwarding address decision algorithm events OSPF route added to, replaced, or deleted from the routing table; route imported into OSPF

Copyright 2011, Juniper Networks, Inc.

183

JunosE 12.1.x System Event Logging Reference Guide

Debug Filter 1

None interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfV3SpfExt
Description Emergency Alert Critical Error OSPFv3 SPF external calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) None SPF (Dijkstra Shortest Path First algorithm) chunking events (for example, number of LSAs processed in an SPF chunk) SPF results Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Warning Log Notice Log

Info Debug Filter 1

Filter 2

ospfV3SpfInter
Description Emergency Alert Critical Error OSPFv3 SPF interarea calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH)

184

Copyright 2011, Juniper Networks, Inc.

Chapter 14: O Commands

Warning Log Notice Log Info Debug Filter 1

None SPF chunking events (for example, number of LSAs processed in an SPF chunk) SPF results Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Filter 2

ospfV3SpfIntra
Description Emergency Alert Critical Error OSPFv3 SPF intra-area calculation None None None Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) None SPF chunking events (for example, number of LSAs processed in an SPF chunk) SPF results Events in building TENT and PATH interface-ip-addressSee description of the ospfElectDr interface-ip-address filter for information about this filter routerSee description of the ospfElectDr router filter for information about this filter

Warning Log Notice Log Info Debug Filter 1

Filter 2

Copyright 2011, Juniper Networks, Inc.

185

JunosE 12.1.x System Event Logging Reference Guide

186

Copyright 2011, Juniper Networks, Inc.

CHAPTER 15

P Commands

pimAutoRPRcvdLog on page 188 pimAutoRPSentLog on page 189 pimBsrRcvdLog on page 189 pimBsrSentLog on page 190 pimGracefulRestartLog on page 191 pimHelloRcvdLog on page 191 pimHelloSentLog on page 192 pimIpv6AutoRPRcvdLog on page 192 pimIpv6AutoRPSentLog on page 193 pimIpv6BsrRcvdLog on page 194 pimIpv6BsrSentLog on page 195 pimIpv6GracefulRestartLog on page 195 pimIpv6HelloRcvdLog on page 196 pimIpv6HelloSentLog on page 197 pimIpv6PktsRcvdLog on page 197 pimIpv6PktsSentLog on page 198 pimPktsRcvdLog on page 199 pimPktsSentLog on page 199 pimsmGeneral on page 200 pimsmMvpn on page 200 policyMgrAttachment on page 201 policyMgrGeneral on page 201 policyMgrPacketLog on page 202 ppp on page 202 pppoe on page 203 pppoeControlPacket on page 204 pppPacket on page 204

Copyright 2011, Juniper Networks, Inc.

187

JunosE 12.1.x System Event Logging Reference Guide

pppStateMachine on page 205 profileMgr on page 206

pimAutoRPRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) AutoRP messages received None None None None None None Short description of received PIM AutoRP packets Complete print of received PIM AutoRP packets interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ]

interface-ip-addressLogs events for a specific interface ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ] ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interface-ip-addressLogs events for a specific interface on the virtual router

188

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

ip-addressSpecifies that you will identify the interface by entering an IP address ipAddressIP address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pimAutoRPSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) AutoRP messages sent None None None None None None Short description of the sent PIM AutoRP packets Complete print of the sent PIM AutoRP packets interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

pimBsrRcvdLog
Description Emergency Alert Reception of PIM-SM IPv4 BSR messages (BSM and C-RP-Advs) None None

Copyright 2011, Juniper Networks, Inc.

189

JunosE 12.1.x System Event Logging Reference Guide

Critical Error Warning Log Notice Log Info Debug Filter 1

None Parse errors Context errors None Description of received messages (specify high verbosity for detail) None interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

pimBsrSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Transmission of PIM-SM IPv4 BSR messages (BSM and C-RP-Advs) None None None System errors None None Description of transmitted messages (specify high verbosity for detail) None interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

190

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

pimGracefulRestartLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter PIM graceful restart None None None None None PIM graceful restart complete None None None

pimHelloRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) hello messages received None None None None None None Short description of the received PIM hello messages Complete printout of the received PIM hello messages interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter

Copyright 2011, Juniper Networks, Inc.

191

JunosE 12.1.x System Event Logging Reference Guide

Filter 2

routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

pimHelloSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) hello messages sent None None None None None None Short description of the PIM hello messages sent Complete description of the PIM hello messages sent interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

pimIpv6AutoRPRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Protocol Independent Multicast (PIM) AutoRP messages received None None None None None None

192

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

Info Debug Filter 1

Short description of received PIM AutoRP packets Complete print of received PIM AutoRP packets interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ]

interface-ipv6-addressLogs events for a specific interface ipv6-addressSpecifies that you will identify the interface by entering an IPv6 address ipv6AddressIPv6 address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ] ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interface-ipv6-addressLogs events for a specific interface on the virtual router ipv6-addressSpecifies that you will identify the interface by entering an IPv6 address ipv6AddressIPv6 address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pimIpv6AutoRPSentLog
Description Emergency Protocol Independent Multicast (PIM) AutoRP messages sent None

Copyright 2011, Juniper Networks, Inc.

193

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter 1

None None None None None Short description of the sent PIM AutoRP packets Complete print of the sent PIM AutoRP packets interface-ipv6-addressSee description of the pimIpv6AutoRPRcvdLog interface-ipv6-address filter for information about this filter routerSee description of the pimIpv6AutoRPRcvdLog router filter for information about this filter

Filter 2

pimIpv6BsrRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Reception of PIM-SM IPv6 BSR messages (BSM and C-RP-Advs) None None None Parse errors Context errors None Description of received messages (specify high verbosity for detail) None interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

194

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

pimIpv6BsrSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Transmission of PIM-SM IPv6 BSR messages (BSM and C-RP-Advs) None None None System errors None None Description of transmitted messages (specify high verbosity for detail) None interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

pimIpv6GracefulRestartLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug PIM IPv6 graceful restart None None None None None PIM graceful restart complete None None

Copyright 2011, Juniper Networks, Inc.

195

JunosE 12.1.x System Event Logging Reference Guide

Filter

None

pimIpv6HelloRcvdLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) hello messages received None None None None None None Short description of the received PIM hello messages Complete printout of the received PIM hello messages interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ]

interface-ipv6-addressLogs events for a specific interface ipv6-addressSpecifies that you will identify the interface by entering an IPv6 address ipv6AddressIPv6 address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ] ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interface-ipv6-addressLogs events for a specific interface on the virtual router

196

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

ipv6-addressSpecifies that you will identify the interface by entering an IPv6 address ipv6Address IPv6 address of interface for which you want to log events unnumberedSpecifies that the interface is unnumbered interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of unnumbered interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pimIpv6HelloSentLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 Protocol Independent Multicast (PIM) Hello messages sent None None None None None None Short description of the PIM hello messages sent Complete description of the PIM hello messages sent interface-ipv6-addressSee description of the pimIpv6HelloRcvdLog interface-ipv6-address filter for information about this filter routerSee description of the pimIpv6HelloRcvdLog router filter for information about this filter

Filter 2

pimIpv6PktsRcvdLog
Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages received None

Emergency

Copyright 2011, Juniper Networks, Inc.

197

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter 1

None None None None None Short description of the PIM messages received Complete description of the PIM messages received interface-ipv6-addressSee description of the pimIpv6HelloRcvdLog interface-ipv6-address filter for information about this filter routerSee description of the pimIpv6HelloRcvdLog router filter for information about this filter

Filter 2

pimIpv6PktsSentLog
Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages sent None None None None None None Short description of the PIM messages sent Complete description of the PIM messages sent interface-ipv6-addressSee description of the pimIpv6HelloRcvdLog interface-ipv6-address filter for information about this filter

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1

198

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

Filter 2

routerSee description of the pimIpv6HelloRcvdLog router filter for information about this filter

pimPktsRcvdLog
Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages received None None None None None None Short description of the PIM messages received Complete description of the PIM messages received interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1

Filter 2

pimPktsSentLog
Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages sent None None None None None None

Emergency Alert Critical Error Warning Log Notice Log

Copyright 2011, Juniper Networks, Inc.

199

JunosE 12.1.x System Event Logging Reference Guide

Info Debug Filter 1

Short description of the PIM messages sent Complete description of the PIM messages sent interface-ip-addressSee description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter routerSee description of the pimAutoRPRcvdLog router filter for information about this filter

Filter 2

pimsmGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter General PIM sparse mode events None None Failure to initialize PIM sparse mode; memory allocation failures Error enabling or disabling PIM sparse mode; error adding or removing state None None Successful addition or removal of peer None None

pimsmMvpn
Description Emergency Alert Critical Error Warning Log Multicast VPN events, including default and data MDT creation and deletion None None None Failure to create MDT None

200

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

Notice Log

Successful creation or deletion of default MDT; switch from data MDT to default MDT or from default MDT to data MDT Successful creation or deletion of data MDT None None

Info Debug Filter

policyMgrAttachment
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Policy Manager policy attachment activity None None None Error attaching policies to static and dynamic interfaces None None Successful attachment of policies to dynamic interfaces CAM resource allocation on a line module is exceeded; the particular policy fails to be attached to the interface None

Filter

policyMgrGeneral
Description Emergency Alert Critical Error Policy Manager general information None None None Error storing or restoring policy manager data to and from NVS; resource exhaustion errors

Copyright 2011, Juniper Networks, Inc.

201

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter

None None None 144-bit, 288-bit, or 576-bit CAM entry allocated for a classifier entry in a particular policy None

policyMgrPacketLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Policy Manager packets None None None None None None Packet trace None None

ppp
Description Emergency Alert Critical Error Warning Log Point-to-Point Protocol layer None None Nonrecoverable error Recoverable error Resource or configuration problem

202

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

Notice Log Info Debug Filter

Authentication actions Downstream buffer slot and upstream buffer slot details Detailed debugging information interface interfaceType interfaceSpecifier

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log PPP events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pppoe
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Point-to-Point over Ethernet layer None None None Error enabling control packet log PPPoE interface or subInterface removed from NVS PPPoE enabled; status change for subInterface Line module status change Multiple PPPoE sessions with the same MAC address and containing the IWF-Session VSA in the PPPoE Active Discovery Request (PADR) packets are allowed; a PPPoE session with the IWF-Session VSA included in the PADR packets is established and terminated. interface interfaceType interfaceSpecifier

Filter

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log PPP events interfaceSpecifierLocation of interface in the appropriate format

Copyright 2011, Juniper Networks, Inc.

203

JunosE 12.1.x System Event Logging Reference Guide

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pppoeControlPacket
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter PPPoE control packet trace None None None None None None None Control packets logged; control packet log enabled interface interfaceType interfaceSpecifier

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log PPP events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pppPacket
Description Emergency Alert PPP packet capture None None

204

Copyright 2011, Juniper Networks, Inc.

Chapter 15: P Commands

Critical Error Warning Log Notice Log Info Debug Filter

None None None None None Packet trace interface interfaceType interfaceSpecifier

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log PPP events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

pppStateMachine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter PPP state machine trace None None None None None None None State machine trace interface interfaceType interfaceSpecifier

Copyright 2011, Juniper Networks, Inc.

205

JunosE 12.1.x System Event Logging Reference Guide

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log PPP events. For example, atm or fastEthernet interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

profileMgr
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Profile manager None None None Profile manager process creation failed Profile being removed was not found None None Initialize profiles from NVS at startup; dump list of profiles after startup initialization; read or save profile numbering seed to and from NVS; profile manager process creation succeeded; NVS updated; profile lookup succeeded; validating or executing removal of profile None

Filter

206

Copyright 2011, Juniper Networks, Inc.

CHAPTER 16

Q Commands

qm on page 207 qos on page 207 qosAttachment on page 208

qm
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Queue manager None None None Queue memory errors; line module queue errors; queue database synchronization errors None None None None None

qos
Description Emergency Alert QoS events None None

Copyright 2011, Juniper Networks, Inc.

207

JunosE 12.1.x System Event Logging Reference Guide

Critical Error

None QoS object creation and modification failures due to resource limitations or configuration limitations; QoS profile to interface attachment failures; QoS failover messages reported by line module None None Modification, creation, and destruction of QoS objects; attachment of modification of QoS objects; attachment of QoS profiles to interfaces; detachment of QoS profiles from interfaces; modification of QoS profiles; QoS interface location availability operations Dynamic attachment of QoS profile to interfaces None

Warning Log Notice Log Info

Debug Filter

qosAttachment
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter QoS profile attachment to interface configuration None None None QoS attachment failures None None Attachment of QoS profiles; modification of QoS profile attachments Dynamic attachment of QoS profiles; QoS profile attach/detach tracing None

208

Copyright 2011, Juniper Networks, Inc.

CHAPTER 17

R Commands

radiusAttributes on page 209 radiusClient on page 210 radiusCoAAttributes on page 210 radiusDisconnectGeneral on page 211 radiusRelayGeneral on page 211 radiusSendAttributes on page 212 remOps on page 213 resourceThresholdTrap on page 213 ripBfd on page 214 ripGeneral on page 214 ripRoute on page 215 ripRtTable on page 216 routeDownloader on page 216 routerLog on page 217 rsvpAsyncMgr on page 217 rsvpBfd on page 218 rsvpGeneral on page 218 rsvpGracefulRestart on page 219 rsvpInterface on page 219 rsvpTunnel on page 220

radiusAttributes
Description Emergency Alert Critical RADIUS user attributes None None None

Copyright 2011, Juniper Networks, Inc.

209

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log Info Debug

None None None None Supported RADIUS attributes found in the Access-Accept or Access-Reject packet; reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140) None

Filter

radiusClient
Description Emergency Alert Critical Error RADIUS Authentication and Accounting Client None None None Failure to include the ICR-Partition-Id VSA in Access-Request and accounting messages when the ICR partition is not found in the AAA list Failure to send accounting on or accounting off; tunnel password format error; tunnel accounting request Dropping tunnel attribute ICR partition accounting message failures when the Accounting-On response is pending from the RADIUS server Authentication or accounting failure due to internal memory allocation failure; memory allocation failure for profile; failed to insert tunnel attribute and tunnel tag table; found unexpected tunnel table None

Warning Log

Notice Log Info

Debug

Filter

radiusCoAAttributes
Description Emergency RADIUS CoA attributes None

210

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

Alert Critical Error Warning Log Notice Log Info Debug

None None None None None None Displays CoA requests and replies received by the router, including the attributes; reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140); Agent Circuit ID, Agent Remote ID (DSL Forum VSA) and DHCP Option 82 None

Filter

radiusDisconnectGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter RADIUS Disconnect and CoA General None None None None None None CoA failures resulting from memory allocation failures CoA results received that do not match pending CoA requests None

radiusRelayGeneral
Description Emergency RADIUS Relay Server general None

Copyright 2011, Juniper Networks, Inc.

211

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None None Memory-allocation; NVS update failure; subscriber session timeouts None None Receiving invalid radius request. Debugging interaction with AAA/GPLAAN None

radiusSendAttributes
Description RADIUS attributes added to Access-Accept (inbound RADIUS requests), Acct-Start, Interim-Acct, and Acct-Stop messages None None None None None None Parse errors that occur in L2C and DSL Forum attribute strings Attributes that are added to outbound RADIUS requests, including Access-Request, Acct-Start, Acct-Stop, interim accounting requests, tunnel accounting requests, and ICR partition accounting requests; IPv6 accounting VSA attributes (IPv6-Acct-Input-Octets [26-151], IPv6-Acct-Output-Octets [26-152], IPv6-Acct-Input-Packets [26-153], IPv6-Acct-Output-Packets [26-154], IPv6-Acct-Input-Gigawords [26-155], and IPv6-Acct-Output-Gigawords [26-156]) that are added to outbound RADIUS requests, including Acct-Stop and interim accounting requests; IPv6 RADIUS IETF and VSA attributes (Ipv6-NdRa-Prefix [26-129], Ipv6-Virtual-Router [26-45], Ipv6-Local-Interface [26-46], Ipv6-Primary-DNS [26-47], Ipv6-Secondary-DNS [26-48], Framed-IPv6-Route [99], Framed-IPv6-Pool [100], Delegated-Ipv6-Prefix [123]) that are added to Access-Accept (inbound RADIUS requests), Acct-Start, Interim-Acct, and Acct-Stop

Emergency Alert Critical Error Warning Log Notice Log Info Debug

212

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

messages; DHCP Option 82 [26159] which is added to trigger packet mirroring for DHCP subscribers; failed to configure radiusPerProfileMap entry due to the unavailability of the resource, insertion failure, and no such entry; restore radiusPerProfileMap due to map insertion failure Filter None

remOps
Description Emergency Alert Critical Error Warning Log Notice Log Remote operations None None None Internal error Maximum table size reached; ICMP failure; same target probed by more than one entry Remote operations application begin/start; ping, traceroute, or nslookup entry; create, modify, or remove; unexpected packet receive; invalid target or source address; late packet receive None Ping, traceroute, or nslookup session begin or end; packet receive; duplicate receive None

Info Debug Filter

resourceThresholdTrap
Description Emergency Alert Critical Error Warning Log Notice Log Resource threshold trap log None None None None Rising trap Falling trap

Copyright 2011, Juniper Networks, Inc.

213

JunosE 12.1.x System Event Logging Reference Guide

Info Debug Filter

None None None

ripBfd
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter RIP and BFD interaction and RIP session log None None None Client session creation, update, and deletion failures unknown RIP peer None BFD session state changes None Router and interface

ripGeneral
Description Emergency Alert Critical Error RIP system notifications None None None Failed to redistribute an external route to the RIP; failed to establish peer with neighbor due to the memory limitation; general RIP configuration error, such as an access list name or route map name specified in the RIP config mode exceed maximum allowable length Failed to process a RIP packet due to the current memory limitation Enable or disable RIP application

Warning Log Notice Log

214

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

Info Debug Filter 1

None RIP query; RIP peer address interface interfaceType interfaceSpecifier

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ripRoute
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 RIP route None None None None None None None Routes sent or received by RIP; if a route is rejected or not sent, gives the reason interface interfaceType interfaceSpecifier

interfaceLogs PPP events for a specific interface interfaceTypeType of interface for which you want to log events

Copyright 2011, Juniper Networks, Inc.

215

JunosE 12.1.x System Event Logging Reference Guide

interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

Filter 2

router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

ripRtTable
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter RIP routing table None None None Failed to remove a RIP route from the IP routing table Failed to added a RIP route to the IP routing table None None Add or remove a route to the RIP routing table None

routeDownloader
Description Emergency Alert Critical Error RADIUS route-download server operation None None None Unable to create application process when configured

216

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

Warning Log Notice Log

Write to mirrored storage memory failed No IP Application is found on warm start; unable to retrieve a route from AAA; route string parse error; too many downloaded routes; invalid destination of a downloaded route; clear all command is terminated due to download failure; empty download Download started, completed, or finalized; IP update started, completed, or finalized Download operation information; such as download request sent. download response received None

Info Debug

Filter

routerLog
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Virtual router log None None None None None Creation and deletion of virtual routers None None router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

rsvpAsyncMgr
Description Emergency Alert RSVP asynchronous manager events None None

Copyright 2011, Juniper Networks, Inc.

217

JunosE 12.1.x System Event Logging Reference Guide

Critical Error Warning Log Notice Log Info Debug

None None None None None Events processed by the asynchronous manager (for example, qos-profile/policy creation/deletion/attachment) None

Filter

rsvpBfd
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug RSVP-TE and BFD interaction None None None None RSVP-TE client session create failed None BFD session create failed for IP address Delete BFD; RSVP-TE established session with BFD manager; Creating BFD session for interface; deleting BFD session for interface Router and interface

Filter

rsvpGeneral
Description Emergency Alert RSVP general purpose None None

218

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

Critical Error Warning Log Notice Log Info Debug Filter

Initialization failures; fatal resource allocation failures; fatal internal errors. Signaling protocol errors; nonfatal internal errors; configuration errors Minor internal errors Very minor internal errors Minor internal errors Function flows; parameter passing; timer operations router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

rsvpGracefulRestart
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter RSVP graceful restart None None None None None RSVP graceful restart complete None None None

rsvpInterface
Description Emergency RSVP interface None

Copyright 2011, Juniper Networks, Inc.

219

JunosE 12.1.x System Event Logging Reference Guide

Alert Critical Error Warning Log Notice Log Info Debug Filter

None None Setup errors; operational errors; invalid configuration errors Nonfatal allocation errors None Minor internal errors Function flows router virtualRouterName [ interface interfaceType interfaceSpecifier ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events interfaceLogs events on a specific interface on the virtual router interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

rsvpTunnel
Description Emergency Alert Critical Error Warning Log Notice Log Info RSVP tunnels None None Critical operational errors Operational errors; resource allocation failures Operational failures; fast-reroute triggering Less serious operational failures; network changes Minor internal errors; timer operations

220

Copyright 2011, Juniper Networks, Inc.

Chapter 17: R Commands

Debug Filter

Function flows, parameter passing router virtualRouterName

routerLogs events for traffic on a specific virtual router virtualRouterNameName of virtual router

Copyright 2011, Juniper Networks, Inc.

221

JunosE 12.1.x System Event Logging Reference Guide

222

Copyright 2011, Juniper Networks, Inc.

CHAPTER 18

S Commands

security on page 224 serviceability on page 224 serviceMgr on page 225 serviceMgrClientSession on page 225 serviceMgrDcm on page 226 serviceMgrMacroManager on page 226 serviceMgrPerformance on page 227 serviceMgrServiceDef on page 227 serviceMgrServiceInstance on page 228 serviceMgrServiceSession on page 228 serviceMgrSubscriberSession on page 229 slep on page 229 snmp on page 230 snmpIfMib on page 230 snmpPduAudit on page 231 snmpSetPduAudit on page 231 snmpTrap on page 232 sonet on page 232 sonetPath on page 233 sonetVT on page 233 ssccDetailPm on page 234 ssccDetailSsc on page 234 ssccGeneral on page 235 ssccLacGeneral on page 235 ssh on page 236 stTunnel on page 237 stTunnelEngine on page 237 system on page 238

Copyright 2011, Juniper Networks, Inc.

223

JunosE 12.1.x System Event Logging Reference Guide

security
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter CLI security messages None None Suspected denial of service attack None Unrecognized username, invalid password, denied host User connect, user disconnect vty allocation success and failure, vty disconnect. None None

serviceability
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Log for serviceability features (currently only for the show tech-support command) None None None Insufficient memory to complete the command The file to support this command is invalid Normal milestones of command completion Timing information of show tech-support command Detailed information of show tech-support command progress None

224

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

serviceMgr
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

serviceMgrClientSession
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager client session None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

Copyright 2011, Juniper Networks, Inc.

225

JunosE 12.1.x System Event Logging Reference Guide

serviceMgrDcm
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager DCM None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

serviceMgrMacroManager
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager macro manager None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

226

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

serviceMgrPerformance
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager performance None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

serviceMgrServiceDef
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager definition None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

Copyright 2011, Juniper Networks, Inc.

227

JunosE 12.1.x System Event Logging Reference Guide

serviceMgrServiceInstance
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager service instance None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

serviceMgrServiceSession
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager service session None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

228

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

serviceMgrSubscriberSession
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Service manager subscriber session None None None Information about detected abnormalities during execution Information about exceeded thresholds None None Information about the code path executed along with values of parameters None

slep
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Point-to-Point Protocol layer None None Startup interface out of resources failure Remove or unbind interface failure; unknown or missing lower binding failure Attempt to set characteristics with invalid value None Hardware state change notification None serial interfaceSpecifier

serialLogs SLEP events for a specific serial Cisco-HDLC interface

Copyright 2011, Juniper Networks, Inc.

229

JunosE 12.1.x System Event Logging Reference Guide

interfaceSpecifierIdentifier for a serial Cisco-HDLC interface

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

snmp
Description Emergency Alert Critical Error Warning Log Embedded SNMP agent None None None None Access violation due to underprivileged community string or a bad proxy selector; access denial due to configured access list; configuration of SNMP failed; trap is dropped because of the severity level filter or because the trap category is not enabled None SNMP agent has been enabled or disabled Trap request dropped; trap processing summary statistics None

Notice Log Info Debug Filter

snmpIfMib
Description Emergency Alert Critical Error Warning Log SNMP Interfaces MIB None None None Invalid ifTableLastChange reported by an interface Failed to process an interface for ifNumber MIB attribute computation

230

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

Notice Log Info Debug Filter

None None None None

snmpPduAudit
Description Emergency Alert Critical Error Warning Log Notice Log Info SNMP PDUs None None None None None None Identifies the following fields in all SNMP PDUs sent to the E Series router and all trap PDUs that leave the system: source and destination IP address, PDU type, snmpVersion, requested, errorStatus, errorIndex, variable count, variable object identifier and data None None

Debug Filter

snmpSetPduAudit
Description Emergency Alert Critical Error Warning Log SNMP set PDUs None None None None None

Copyright 2011, Juniper Networks, Inc.

231

JunosE 12.1.x System Event Logging Reference Guide

Notice Log Info

None Identifies the following fields in SNMP set PDUs: source and destination IP address, PDU type, snmpVersion, requested, errorStatus, errorIndex, variable count, variable object identifier and data None None

Debug Filter

snmpTrap
Description Emergency Alert Critical Error Warning Log SNMP Trap PDU events None None None None TX Power High Warning; TX Power Low Warning; RX Power High Warning; RX Power Low Warning None SNMP trap PDUs that the corresponding SNMP agent transmitted None None

Notice Log Info Debug Filter

sonet
Description Emergency Alert Critical Error SONET None None None Configuration errors, NVS failures

232

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

Warning Log

NV interface removal after failed init from NV; errors during interface add/update or during hwPresent notification; path capability notification; failed pool expansion Pool expansion, dropped SNMP traps NV interface creation; interface modification from path capability; unknown interface during hwNotPresent notification; interface notification for unknown interface Application initialization trace, interface creation/deletion events None

Notice Log Info

Debug Filter

sonetPath
Description Emergency Alert Critical Error Warning Log SONET Path None None None None Errors during interface removal (for removable paths); path update failures from path configuration notification; failed mapping from SONET status; errors during path creation; engine addInterface errors during hwPresent notification; errors during path creation for nonchannelized interfaces; failed pool expansion Pool expansion Init from NV failures; NV upgrade; path update progress; path configuration notification Path update None

Notice Log Info Debug Filter

sonetVT
Description Emergency Alert Critical SONET virtual tributary None None None

Copyright 2011, Juniper Networks, Inc.

233

JunosE 12.1.x System Event Logging Reference Guide

Error Warning Log Notice Log Info Debug Filter

None Init from NV failures; errors during remove interface; failed pool expansion Engine add interface retry; pool expansion Errors during add interface None None

ssccDetailPm
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter SDX client (formerly SSCC) detail for policy manager (PM) interaction None None None Failure of policy manager calls (detail) None None None Policy manager function call made; Policy manager attempts to get statistics None

ssccDetailSsc
Description Emergency Alert Critical Error SDX client (formerly SSCC) detail for SDX interaction None None None More detail for SDX management errors

234

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

Warning Log Notice Log Info Debug Filter

None None None More detail for SDX events None

ssccGeneral
Description Emergency Alert Critical Error SDX client (formerly SSCC) general None None None Failure to get heap space; packet decode errors; SDX inconsistency errors; packet creation errors; failure of calls to policy manager (changing, attaching policy); attempt to manage unknown interface None None Creation or deletion of SDX client Events (create interface, reports, removals); policy deletions; policy reattachments; CLI events; connection retries None

Warning Log Notice Log Info Debug

Filter

ssccLacGeneral
Description Emergency Alert Critical L2TP LAC interfaces details for policy and QoS management by the COPS client None None None

Copyright 2011, Juniper Networks, Inc.

235

JunosE 12.1.x System Event Logging Reference Guide

Error

Error encountered while managing L2TP LAC interfaces, or during the installation and removal of policies from the L2TP LAC interfaces Unexpected events related to policy and QoS management of LAC interfaces by the COPS protocol that are handled appropriately by the software None Creation or deletion of SDX client Detailed debugging information related to L2TP LAC interfaces to assist in troubleshooting and analyzing problems None

Warning Log

Notice Log Info Debug

Filter

ssh
Description Emergency Alert Critical Error Secure Shell (SSH) Server None None None Cannot create SSH daemon; unexpected socket condition; packet overrun; AAA failure; resource allocation failure; host key read error Missing/invalid public user key; possible DoS attack (invalid reported field length); unknown protocol message; protocol message received during wrong state; unsupported key exchange algorithm; unsupported cipher algorithm; unsupported encryption algorithm; unsupported MAC algorithm; unsupported compression algorithm; unexpected session/channel error; window adjust failure; user lock out announcement; user denied due to lock-out; packet encryption/decryption failure; unexpected protocol error; packet send failure; unsupported client version; malformed packet; packet MAC failure; user timeout AAA user authentication failure; ignored channel request; client connect/disconnect Detailed client connection info (per connection attempt) Daemon instance creation/removal; detailed packet info (per packet) None

Warning Log

Notice Log Info Debug Filter

236

Copyright 2011, Juniper Networks, Inc.

Chapter 18: S Commands

stTunnel
Description Emergency Alert Critical Error Secure tunnel (ST) interface None None None ST interface configuration error; ST interface engine interaction failures; IPSec service line module resource error ST interface pool exhausted; manual session key length input problems; problem relocating ST interface ST interface memory pool extension Transport virtual router table downloading; ST interface status retrieval; transport virtual router table down; information about clear sa command Detailed debug information related to the ST None

Warning Log

Notice Log Info

Debug Filter

stTunnelEngine
Description Logs events and conditions related to the communication between the IPSec tunnels application and the IPSec server and line modules None None None Unexpected and nonrecoverable communication errors Unexpected but recoverable events Controller up/down and restart up/down events Processing of controller up/down and restart up/down events; processing of synchronization events following a cold- or warm-restart

Emergency Alert Critical Error Warning Log Notice Log Info

Copyright 2011, Juniper Networks, Inc.

237

JunosE 12.1.x System Event Logging Reference Guide

Debug

Detailed debug information related to all communication between the IPSec tunnels application and the IPSec server and line modules; interactions with the IP Engine application for virtual router table download to designated IPSec server modules None

Filter

system
Description Emergency Alert Critical System management and monitoring None None Line module ping failure threshold exceeded; test failure on line module or standby SRP module; test failure on line module or standby SRP module Error on line module or standby SRP module; critical subsystem failure condition (NVS, power, fan, network timing, temperature); unrecognized module type; module ID mismatch; line module memory reduction; line module bandwidth misconfiguration; unrecoverable file system synchronization errors; software incompatibility issue Noncritical subsystem failure condition (heap/CPU utilization, NVS, network timing); unexpected software error; recoverable file system synchronization errors; file system out of synchronization notification; NVS subsystem redundancy size mismatch; line module ID block misconfigured Subsystem failure condition abatement (heap/CPU utilization, NVS, power, fan, network timing, temperature); new module announcement; module revision mismatch; module upgraded or downgraded (ECC/non-ECC); module online or offline Synchronization start, complete; line module set timing failed (not necessarily an error); NVS volume flush Module state change; module memory announcement; redundancy role changes; server role changes; module enable, disable, or clear notification; file system synchronization (normal operation); line module timing source set failure (not necessarily an error); image protection notification slot slotNumber

Error

Warning Log

Notice Log

Info

Debug

Filter

slotLogs events for a specific slot slotNumberNumber of slot for which you want to log events

238

Copyright 2011, Juniper Networks, Inc.

CHAPTER 19

T Commands

tacacsPlusServer on page 239 tcpGeneral on page 240 tcpTraffic on page 240 tcpv6Traffic on page 241 telnet on page 242 telnetClient on page 242 tftpClient on page 243 trackerEvents on page 243 trackerGeneral on page 244 tsm on page 244

tacacsPlusServer
Description Emergency Alert Critical Error Warning Log TACACS+ server None None None Unable to start TACACS+; failed to create tacacsPlusProcess instance while in startup Failed to create a host while reading parameters from NVS; primary host not found in NVS; more than one primary host found in NVS; number of primary hosts in NVS is not one, and attempts to correct this condition failed; unable to bind socket to source address configured to TACACS+ server Received unexpected data from the TACACS+ host, which will result in authentication failure; either there is no host in NVS, or all attempts to configure a host failed None

Notice Log

Info

Copyright 2011, Juniper Networks, Inc.

239

JunosE 12.1.x System Event Logging Reference Guide

Debug

Authentication attempted while TACACS+ is being shutdown; not enough memory for sending authentication requests; socket allocation limit reached; failed to allocate new socket for a request; not enough memory for protocol message; received unexpected notification on the socket None

Filter

tcpGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter TCP system None None None None None TCP state change event info (brief) None TCP state changes (detail); TCP packet transmission; minor TCP errors router virtualRouterName

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

tcpTraffic
Description Emergency Alert Critical Error Warning Log TCP frame transmit and receive None None None None None

240

Copyright 2011, Juniper Networks, Inc.

Chapter 19: T Commands

Notice Log Info Debug Filter 1

TCP packet discards due to MD5 authorization failure and checksum failure None Report all TCP receive and transmit events remote-ip-address ipAddress [ ipAddressMask ]

remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

Filter 2

router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

tcpv6Traffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 TCP frame transmit and receive None None None None None TCP packet discards due to MD5 authorization failure and checksum failure None Report all TCP receive and transmit events remote-ip-address ipAddress [ ipAddressMask ]

remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages

Copyright 2011, Juniper Networks, Inc.

241

JunosE 12.1.x System Event Logging Reference Guide

ipAddressMaskMask for the remote address

Filter 2

router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

telnet
Description Emergency Alert Critical Error Telnet daemon None None None Error condition binding to or listening on Telnet sockets; unexpected software error; NVS mismatch; insufficient memory resources None None None Stopped listening on a specified router None

Warning Log Notice Log Info Debug Filter

telnetClient
Description Emergency Alert Critical Error Telnet client log None None None None

242

Copyright 2011, Juniper Networks, Inc.

Chapter 19: T Commands

Warning Log Notice Log

None Unexpected socket condition; unable to connect to remote host; successful connection; ENV send failure; resource allocation failure Connection attempt; detailed connection information (per connection); escape character announcement; connection closed None None

Info

Debug Filter

tftpClient
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter TFTP client log None None None Memory allocation failures None TFTP error message received from remote host Initiating communication with remote host; discarded messages TFTP responses received from incorrect source port on remote host None

trackerEvents
Description Emergency Alert Critical Error Tracker event propagation None None None None

Copyright 2011, Juniper Networks, Inc.

243

JunosE 12.1.x System Event Logging Reference Guide

Warning Log Notice Log Info Debug Filter

None None Indicates if there is a memory shortage for event propagation Provides debug information for event propagation from the tracker component None

trackerGeneral
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Tracker component None None None None Indicates if there is a memory shortage for tracker operations None Indicates if there is a memory shortage for accommodating new clients Provides debug information for the tracker component None

tsm
Description Emergency Alert Critical Error Tunnel server manager None None Number of interfaces in use is critically close to maximum Memory exhaustion errors

244

Copyright 2011, Juniper Networks, Inc.

Chapter 19: T Commands

Warning Log

Nonvolatile storage integrity problems; memory exhaustion-based denial of service; number of interfaces in use reaching high levels Nonvolatile storage allocation problems; memory pool expansion Resource-restriction based denial of service; line module up or down transitions Program debugging information including function call tracing None

Notice Log Info Debug Filter

Copyright 2011, Juniper Networks, Inc.

245

JunosE 12.1.x System Event Logging Reference Guide

246

Copyright 2011, Juniper Networks, Inc.

CHAPTER 20

U Commands

udpTraffic on page 247 udpv6Traffic on page 248

udpTraffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 UDP frame transmit or receive None None None None None None None Report all UDP receive or transmit events remote-ip-address ipAddress [ ipAddressMask ]

remote-ip-addressLogs events for a remote address ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

Filter 2

router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ]

routerLogs events on a specific virtual router virtualRouterNameName of virtual router for which you want to log events remote-ip-addressLogs events for a remote address

Copyright 2011, Juniper Networks, Inc.

247

JunosE 12.1.x System Event Logging Reference Guide

ipAddressAddress of remote system for which you want to log messages ipAddressMaskMask for the remote address

udpv6Traffic
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter 1 UDPv6 packet transmit and receive events None None None None None None None All UDPv6 packet receive and transmit events [ router virtualRouterName ]

routerLogs events for a specific virtual router virtualRouterNameName of virtual router for which you want to log events

Filter 2

[ remote-ipv6-address ipv6Address ]

remote-ipv6-addressLogs events for packets arriving from or going to a specified IPv6 address ipv6AddressIPv6 address of remote system for which you want to log messages

248

Copyright 2011, Juniper Networks, Inc.

CHAPTER 21

V Commands

vrrp on page 249 vrrpTracking on page 250 vsm on page 250 vsmEngine on page 251

vrrp
Description Emergency Alert Critical Error Virtual Router Redundancy Protocol None None NVS error; out of resources; unexpected error Virtual router ID (VRID) creation or modification failure; association addresses creation or modification failure IP interface used by VRRP was removed; unexpected advertisement received from neighbor; invalid authentication detected; unable to get IP interfaces primary address VRRP neighbor found State machine change Management get, set, create, and remove interface interfaceType interfaceSpecifier [ vrrpIdentifier ]

Warning Log

Notice Log Info Debug Filter

interfaceLogs events on a specific interface interfaceTypeType of interface for which you want to log events interfaceSpecifierLocation of interface in the appropriate format

Copyright 2011, Juniper Networks, Inc.

249

JunosE 12.1.x System Event Logging Reference Guide

NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

vrrpIdentifierID of the VRRP router for which you want to log events

vrrpTracking
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter Virtual Router Redundancy Protocol tracking None None None None None None Information about interaction between VRRP and the tracker module Management get, set, create, and remove None

vsm
Description Emergency Alert Critical Error Warning Log Notice Log VLAN subinterface manager None None Unable to find VLAN major interface for agent-circuit-idbased VLAN Truncating agent-circuit-id string Creation failure Out of pool space

250

Copyright 2011, Juniper Networks, Inc.

Chapter 21: V Commands

Info Debug Filter

Replay of unknown interface after high availability switchover General VSM operations, such as agent-circuit-idbased VLAN created None

vsmEngine
Description Emergency Alert Critical Error Warning Log Notice Log Info Debug Filter VLAN subinterface manager engine None None None None None None None Recoverable out-of-sync conditions after high availability switchover None

Copyright 2011, Juniper Networks, Inc.

251

JunosE 12.1.x System Event Logging Reference Guide

252

Copyright 2011, Juniper Networks, Inc.

PART 3

Index

Index on page 255

Copyright 2011, Juniper Networks, Inc.

253

JunosE 12.1.x System Event Logging Reference Guide

254

Copyright 2011, Juniper Networks, Inc.

Index
B
baseline commands baseline log.........................................................................5 log event categories................................................................21 aaaAtm1483Cfg...............................................................21 aaaEngineGeneral..........................................................21 aaaQosCfg.........................................................................21 aaaServerGeneral...........................................................21 aaaUserAccess................................................................21 addressServerGeneral...................................................21 ar1AaaServerGeneral.....................................................21 atm........................................................................................21 atm1483..............................................................................21 atm1483VcClass..............................................................21 atmAal5..............................................................................21 atmVcClass.......................................................................21 auditIpsec..........................................................................32 bfdAdaptivity...................................................................33 bfdEvents..........................................................................34 bfdGeneral........................................................................34 bfdSession........................................................................35 bgpConnections.............................................................35 bgpDampening...............................................................36 bgpEvents..........................................................................37 bgpGeneral.......................................................................38 bgpGracefulRestart......................................................38 bgpIpv6NextHops.........................................................39 bgpKeepAlives................................................................40 bgpMessages...................................................................41 bgpNeighborChanges..................................................42 bgpNextHops..................................................................42 bgpRoutes........................................................................43 bridge..................................................................................45 bridgeEngine....................................................................45 bridgingMgr......................................................................45 bulkStats...........................................................................45 cacGeneral.......................................................................45 cacIntf................................................................................45 cliCommand....................................................................45 cliGeneral..........................................................................45 connectionManager......................................................45 cops.....................................................................................45 copsPr................................................................................45 coreDump.........................................................................45

C
conventions notice icons......................................................................xxi text and syntax..............................................................xxii customer support.................................................................xxiii contacting JTAC............................................................xxiii

D
destination logging messages by.......................................................5 documentation set comments on................................................................xxiii

E
engineering logs enabling................................................................................5

F
fields adding to logs.....................................................................5

L
legacy-configuration-guidelines..................................14, 17 log commands............................................................................5 baseline log.........................................................................5 log destination...................................................................5 log engineering..................................................................5 log field.................................................................................5 log here.................................................................................5 log severity..........................................................................5 log unlimit............................................................................5 log verbosity........................................................................5 no log filters.......................................................................16 See also show log commands

Copyright 2011, Juniper Networks, Inc.

255

JunosE 12.1.x System Event Logging Reference Guide

ctreeLog.............................................................................45 dcm.....................................................................................45 dcmEngineGeneral.......................................................45 debounceEvents.............................................................57 debounceGeneral...........................................................57 dhcpCapture....................................................................45 dhcpExternal...................................................................45 dhcpExternalEngine.....................................................45 dhcpGeneral....................................................................45 dhcpIssuLog.....................................................................45 dhcpLocalClients...........................................................45 dhcpLocalGeneral.........................................................45 dhcpLocalHighAvailability..........................................45 dhcpLocalPool................................................................45 dhcpLocalProtocol........................................................45 dhcpNvGeneral...............................................................45 dhcpOfferLog..................................................................45 dhcpPbeGeneral............................................................45 dhcpProxyGeneral.........................................................45 dhcpRelayGeneral.........................................................45 dhcpv6Client...................................................................45 dhcpv6DemuxGeneral................................................45 dhcpv6LsGeneral..........................................................45 dismanEventMgr............................................................45 dnsGeneralLog................................................................45 dosProtection..................................................................45 ds1........................................................................................45 ds3.......................................................................................45 dvmrpGeneral.................................................................45 dvmrpGracefulRestart...................................................71 dvmrpMcastTable...........................................................71 dvmrpProbeRcv...............................................................71 dvmrpProbeSent.............................................................71 dvmrpRtTable...................................................................71 ethernet...............................................................................71 ethernetStateSession....................................................71 fileSystem...........................................................................71 flowInspection..................................................................71 flowInspectionEngine....................................................71 flowServicesFirewallAlert............................................71 flowServicesFirewallAudit...........................................71 frameRelay.........................................................................71 fsAgent................................................................................71 ft1...........................................................................................71 ftpClient..............................................................................71 ftpServer.............................................................................71 gplaan..................................................................................71 ha...........................................................................................71 hdlc.......................................................................................71

hotfixGeneral....................................................................71 httpServer..........................................................................71 icImageFixServer.............................................................71 icmpTraffic.........................................................................71 icmpv6Traffic....................................................................71 igmpGeneral......................................................................71 igmpGracefulRestart......................................................71 igmpGroupState..............................................................71 ikeCertificateMgr..............................................................71 ikeEnrollment....................................................................71 ikepki...................................................................................94 interModuleCommunication.....................................95 ipAccessList.....................................................................96 ipEngine.............................................................................96 ipEngineering...................................................................97 ipflowstats........................................................................97 ipflowstatsEngine..........................................................98 ipGeneral..........................................................................98 ipIfCreator.........................................................................99 ipInterface........................................................................99 ipNhopTrackerGeneral................................................99 ipProfileMgr......................................................................99 ipRoutePolicy..................................................................99 ipRouteTable...................................................................99 ipsecIdDb..........................................................................99 ipsecP1Throttler.............................................................99 ipsecXcfgSM....................................................................99 ipSubscriberMgr.............................................................99 ipTraffic..............................................................................99 ipTunnel.............................................................................99 ipv6AccessList................................................................99 ipv6General.....................................................................99 ipv6Interface...................................................................99 ipv6ProfileMgr................................................................99 ipv6RouteTable..............................................................99 ipv6Traffic........................................................................99 ipv6Types.........................................................................99 isisAdjChange..................................................................99 isisAdjPackets..................................................................111 isisBfdEvents....................................................................111 isisChecksumErr..............................................................111 isisGeneral.........................................................................111 isisHelloGeneral..............................................................111 isisHelloPackets..............................................................111 isisIpv6Log.........................................................................111 isisLdpEvents...................................................................111 isisLocalUpdate...............................................................111 isisMplsTeAdvertisements..........................................111 isisMplsTeEvents............................................................111

256

Copyright 2011, Juniper Networks, Inc.

Index

isisNsfEvents....................................................................111 isisProtocolErr..................................................................111 isisSnpPackets.................................................................111 isisSpfEvents....................................................................111 isisSpfStatistics...............................................................111 isisSpfTriggers..................................................................111 isisUpdatePackets.........................................................111 isVoice................................................................................121 itm.......................................................................................122 l2cGeneral.......................................................................124 l2cKeepAlive...................................................................124 l2cPacket.........................................................................125 l2tp.....................................................................................125 l2tpDialoutGenerator..................................................126 l2tpDisconnectCause.................................................126 l2tpIpLowerBinding......................................................127 l2tpStateMachine.........................................................127 lasv6General..................................................................128 ldpConnect.....................................................................128 ldpGeneral.......................................................................129 ldpGracefulRestart......................................................129 ldpHelloMessages.......................................................130 ldpHelloMgr....................................................................130 ldpInterface......................................................................131 ldpMessages...................................................................132 ldpPeer..............................................................................132 ldpShimInterface..........................................................133 ldpSocket.........................................................................133 ldpTimer...........................................................................134 ldpVpls..............................................................................135 ldpWorker........................................................................135 localAddressServerGeneral.....................................136 localAuthServer............................................................136 localEnableAuthServer...............................................137 localLinePassword.......................................................137 macroData......................................................................140 mgtmGeneral..................................................................141 mgtmGracefulRestart................................................142 mgtmv6General............................................................142 mgtmv6GracefulRestart...........................................143 mldGeneral.....................................................................144 mldGracefulRestart.....................................................145 mldGroupState.............................................................145 mmcd...............................................................................146 mobileIpv4HaBinding.................................................146 mobileIpv4HaEng.........................................................147 mobileIpv4HaEvent.....................................................147 mobileIpv4HaLog.........................................................148 mplsFwdTable..............................................................148

mplsGeneral...................................................................149 mplsHighAvailability...................................................149 mplsMajorInterface.....................................................150 mplsMinorInterface......................................................151 mplsRouter.....................................................................152 mplsShimInterface......................................................152 mplsTraffic......................................................................153 mrInfoLog........................................................................153 mrInfoRcvdLog..............................................................154 mrInfoSentLog..............................................................154 mtraceLog.......................................................................155 mtraceRcvdLog.............................................................155 mtraceSentLog.............................................................156 multicastTraffic.............................................................156 nameResolverLog........................................................159 nfsClient...........................................................................159 noneAaaAddrServer...................................................160 noneAaaServer.............................................................160 ntpGeneral.......................................................................161 os........................................................................................165 ospfElectDr.....................................................................166 ospfGeneral....................................................................167 ospfHelloPktsRcvd......................................................167 ospfHelloPktsSent.......................................................167 ospfInterface..................................................................167 ospfLdpEvents...............................................................167 ospfLsa.............................................................................167 ospfNeighbor...................................................................171 ospfPktsRcvd..................................................................171 ospfPktsSent...................................................................171 ospfRestart.......................................................................171 ospfRoute.........................................................................171 ospfSpfExt........................................................................171 ospfspfInter......................................................................171 ospfSpfIntra.....................................................................171 ospfTeDatabase.............................................................171 ospfTeSpf.........................................................................171 ospfv3ElectDr..................................................................171 ospfv3General.................................................................171 ospfv3HelloPktsRcvd...................................................171 ospfv3HelloPktsSent...................................................171 ospfv3Interface...............................................................171 ospfV3Lsa.........................................................................171 ospfv3Neighbor..............................................................171 ospfv3PktsRcvd..............................................................171 ospfv3PktsSent..............................................................171 ospfv3Route.....................................................................171 ospfV3SpfExt..................................................................171 ospfV3SpfInter...............................................................171

Copyright 2011, Juniper Networks, Inc.

257

JunosE 12.1.x System Event Logging Reference Guide

ospfV3SpfIntra...............................................................171 pimAutoRPRcvdLog.....................................................171 pimAutoRPSentLog....................................................188 pimBsrRcvdLog.............................................................188 pimBsrSentLog.............................................................188 pimGracefulRestartLog.............................................188 pimHelloRcvdLog........................................................188 pimHelloSentLog.........................................................188 pimIpv6AutoRPRcvdLog...........................................188 pimIpv6AutoRPSentLog...........................................188 pimIpv6BsrRcvdLog....................................................188 pimIpv6BsrSentLog....................................................188 pimIpv6GracefulRestartLog....................................188 pimIpv6HelloRcvdLog................................................188 pimIpv6HelloSentLog................................................188 pimIpv6PktsRcvdLog.................................................188 pimIpv6PktsSentLog..................................................188 pimPktsRcvdLog..........................................................188 pimPktsSentLog...........................................................188 pimsmGeneral..............................................................188 pimsmMvpn...................................................................188 policyMgrAttachment................................................188 policyMgrGeneral.........................................................188 policyMgrPacketLog...................................................188 ppp....................................................................................188 pppoe...............................................................................188 pppoeControlPacket..................................................188 pppPacket......................................................................188 pppStateMachine........................................................188 profileMgr........................................................................188 qm......................................................................................188 qos.....................................................................................188 qosAttachment............................................................188 radiusAttributes............................................................188 radiusClient....................................................................188 radiusCoAAttributes...................................................188 radiusDisconnectGeneral.........................................188 radiusRelayGeneral.....................................................188 radiusSendAttributes.................................................188 remOps............................................................................188 resourceThresholdTrap.............................................188 ripBfd................................................................................188 ripGeneral.......................................................................188 ripRoute...........................................................................188 ripRtTable.......................................................................188 routeDownloader.........................................................188 routerLog.........................................................................188 rsvpAsyncMgr................................................................188 rsvpBfd.............................................................................188

rsvpGeneral....................................................................188 rsvpGracefulRestart....................................................188 rsvpInterface..................................................................188 rsvpTunnel......................................................................188 security.............................................................................188 serviceability..................................................................188 serviceMgr.......................................................................188 serviceMgrClientSession...........................................188 serviceMgrDcm.............................................................188 serviceMgrMacroManager........................................188 serviceMgrPerformance............................................188 serviceMgrServiceDef.................................................188 serviceMgrServiceInstance......................................188 serviceMgrServiceSession........................................188 serviceMgrSubscriberSession.................................188 slep....................................................................................188 snmp.................................................................................188 snmpIfMib.......................................................................188 snmpPduAudit..............................................................188 snmpSetPduAudit.......................................................188 snmpTrap........................................................................188 sonet.................................................................................188 sonetPath.......................................................................188 sonetVT...........................................................................188 ssccDetailPm.................................................................188 ssccDetailSsc................................................................188 ssccGeneral....................................................................188 ssccLacGeneral............................................................235 ssh......................................................................................188 stTunnel...........................................................................237 stTunnelEngine.............................................................237 system.............................................................................238 tacasPlusServer...........................................................239 tcpGeneral.....................................................................240 tcpTraffic........................................................................240 tcpv6Traffic.....................................................................241 telnet................................................................................242 telnetClient....................................................................242 tftpClient.........................................................................243 trackerEvents................................................................243 trackerGeneral..............................................................244 tsm....................................................................................244 udpTraffic........................................................................247 udpv6Traffic..................................................................248 vrrp....................................................................................249 vrrpTracking...................................................................250 vsm...................................................................................250 vsmEngine.......................................................................251

258

Copyright 2011, Juniper Networks, Inc.

Index

M
manuals comments on................................................................xxiii

N
notice icons...............................................................................xxi

P
platform considerations system logs.........................................................................4

S
service commands service timestamps........................................................14 show log commands show log configuration..................................................17 show log data....................................................................17 support, technical See technical support system event logs individual logs............................................................10, 14 severity..................................................................................3 system-wide logs.....................................................10, 14 user-defined classification..........................................15 verbosity...............................................................................3 viewing logs.......................................................................17

T
technical support contacting JTAC............................................................xxiii text and syntax conventions.............................................xxii

Copyright 2011, Juniper Networks, Inc.

259

JunosE 12.1.x System Event Logging Reference Guide

260

Copyright 2011, Juniper Networks, Inc.