Scribd
Upload
499 views1 page

MTL 5995

The MTL5995 is a power supply unit for 31.25kbit/s fieldbus systems compatible with both IS and non-IS applications. It provides 19V DC power at up to 350mA and includes an internal safe-area terminator that can be enabled via a switch. The power supply operates from 20-30V DC and has specifications for output voltage, current, ripple, minimum load, and maximum cable length.

Uploaded by

bolmatica
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
499 views1 page

MTL 5995

The MTL5995 is a power supply unit for 31.25kbit/s fieldbus systems compatible with both IS and non-IS applications. It provides 19V DC power at up to 350mA and includes an internal safe-area terminator that can be enabled via a switch. The power supply operates from 20-30V DC and has specifications for output voltage, current, ripple, minimum load, and maximum cable length.

Uploaded by

bolmatica
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MTL5995 FIELDBUS POWER SUPPLY

31.25kbit/s fieldbus
The MTL5995 is a general purpose power supply unit designed for use in 31.25kbit/s (H1) fieldbus systems. It is compatible with both IS applications and non-IS applications. For IS applications it must be used with a safety barrier such as MTL791. The MTL5995 complies with the requirements of Fieldbus FoundationTM power supply Type 131 (non-IS supply intended for feeding an IS barrier). To comply with fieldbus standards, each bus must be terminated at both ends. MTLs FBT1-IS or FCS-MBT fieldbus terminators can be supplied for this purpose or, for installations in which the safe-area bus length is small, the MTL5995 includes an internal safe-area terminator which is switch enabled.

Safe area

7 8 9 10 11 12

+ Vs 20 to 30V dc Vs+ FBT1-IS* fieldbus terminator T

PSU Switch

13 14

FBT1-IS* fieldbus terminator T

Fieldbus device(s) Fieldbus

Hazardous area

Safe area

SPECIFICATION
See also common specification Output 19V2% <2 dc impedance 350mA maximum current Output ripple Complies with clause 22.6.2 of the fieldbus standards for output current >10mA. Minimum load current 0mA Maximum cable length 1900m Type A cable as defined in clause 22.7.2 of the fieldbus standards, other cables as indicated in annex B of the standard. Internal termination Selected by a switch in the base of the unit. Supply voltage 20 to 30V dc -20C to +60C Power requirement, with 350mA output load 420mA typical at 24V 370mA at 30V 520mA at 20V Power dissipation within unit, with 350mA output load 3.4W typical at 24V 4.5W maximum at 30V
Note: To allow adequate heat dissipation under all likely thermal conditions, it is recommended that MTL5995s are installed on DIN-rail with a 10mm space between adjacent units. MTL MS010 10mm DIN-rail module spacers are available for this purpose.
7 8 9 10 11 12 PSU Switch 13 14

Fieldbus device(s)

+ Vs 20 to 30V dc Vs+

FBT1-IS* fieldbus terminator T

MTL791 31.25kbit/s fieldbus barrier

Fieldbus device(s)

Terminal 7 8 & 11 9 & 12 10 13 14

Function Internally linked to 10 Safe-area fieldbus device(s) connection ve Safe-area fieldbus device(s) connection +ve Internally linked to 7 Supply ve Supply +ve

LED indicator Green: one provided for power indication

Note: Terminals 7 and 10 are linked internally to assist in the process of terminating cable screens.

The applicable fieldbus specifications and standards are: Foundation

Fieldbus 31.25kbit/s Physical Layer Profile Specification, document FF-816, IEC 61158-2: 1993 and ISA-S50.02-1992 for 31.25kbit/s fieldbus systems.

Fieldbus Foundation is a trademark of Fieldbus Foundation, Austin, Texas, USA. Foundation is a trademark of Fieldbus Foundation, Austin, Texas, USA

See also MTL5000 Series cable parameters and approvals

EUROPE (EMEA) Tel: +44 (0)1582 723633 Fax: +44 (0)1582 422283 AMERICAS Tel: +1 603 926 0090 Fax: +1 603 926 1899 ASIA PACIFIC Tel: +65 487 7887 Fax: +65 487 7997 E-mail: [email protected] Web site: www.mtl-inst.com

Sept 2002

You might also like