Scribd
Upload
51 views2 pages

Troubleshoot and Maintain Indoor Air Quality With The New Fluke 983 Particle Counter

The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals, measuring temperature and relative humidity as well as particle size. With expanded data logging and six-channel particle size display, The Fluke 983 allows users to run more tests quickly, with less time spent cycling through screens to view the data.

Uploaded by

Cristóbal Eduardo Carreño Mosqueira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

Troubleshoot and Maintain Indoor Air Quality With The New Fluke 983 Particle Counter

The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals, measuring temperature and relative humidity as well as particle size. With expanded data logging and six-channel particle size display, The Fluke 983 allows users to run more tests quickly, with less time spent cycling through screens to view the data.

Uploaded by

Cristóbal Eduardo Carreño Mosqueira
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Troubleshoot and maintain indoor air quality with the new Fluke 983 Particle Counter

Technical Data
The particle counter is an essential tool in the HVAC/IAQ professionals toolbox. From filter testing to basic IAQ investigations, the particle counter equips the user with valuable data concerning the concentration and source of particulates in the tested environment. The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals, measuring temperature and relative humidity as well as particle size. With expanded data logging and six-channel particle size display, the Fluke 983 allows users to run more tests quickly, with less time spent cycling through screens to view the data. The Fluke 983 is lightweight and easy to use in any position, with a comfortable hand strap and rugged holster.

Fluke 983 Particle Counter

Selectable sample time, count data, programmable delay Set sample size to cubic feet or liters, set temperature measurements to C or F Data displayed in totalize or concentration modes Logged samples include date, time, particle counts, sample volume, temperature and relative humidity.

General Features

Compact and lightweight (1.0 kg/2.2 lbs) Graphic liquid crystal display with backlight AC adapter, 12 V DC at 2.5 A, 90 to 250 V AC, 50 to 60 Hz Rechargeable battery (NiMH, 4.8 V at 4.5 Ah) Simple user interface Operating: 10 C to 40 C (50 F to 104 F), 20 % to 90 % relative humidity, non-condensing Meets 115B9921:1997 and CE standards Included: Certificate of Calibration (NIST) Windows-compatible software download utility DB9 to RS-232 adapter and cable Isokinetic probe Zero count filter High purity tubing 1/8 in. hose barb adapter Power supply Operation manual Hard molded case

Specifications
6 size channels Flow Rate Count Modes Counting Efficiency Zero Count Coincidence Loss Relative Humidity Temperature Data Storage Alarms Delay Time Sample Inlet Interface Dimensions (W x L x D) Weight Environmental Power Rechargeable Battery Battery Live / Recharge Time Calibration 0.3, 0.5, 1.0, 2.0, 5.0, 10.0 m 0.1 cfm (2.83 L/min) controlled by internal pump Concentration, totalize, audio 50 % @ 0.3 m; 100 % for particles > 0.45 m (per JIS B9921:1997) 1 count/5 minute (JIS B9921:1997) 5 % at 2,000,000 particles per ft3 7 %, 20 % to 90 % non-condensing 3 C, 10 C to 40 C (50 F to 104 F) 5000 sample records (rotating buffer) of date, time, counts, relative humidity, temperature, sample volumes, alarms, label Counts, low battery, sensor fail 0 to 24 hours Isokinetic probe RS-232 and RS-485 via RJ-45 11.43 cm x 20.96 cm x 5.72 cm (4.5 in x 8.25 in x 2.25 in) 1.0 kg (2.2 lbs) Operating: 10 C to 40 C (50 F to 104 F), 20 % to 90 % relative humidity, non-condensing Storage: -10 C to 50 C (14 F to 122 F), up to 90 % relative humidity, non-condensing AC adapter, 12 V DC at 2.5 A, 90 to 250 V AC, 50 to 60 Hz NiMH, 4.8 V at 4.5 Ah; replaceable 8 hours / 2 hours PSL particles in air (NIST traceable)

Other IAQ Tools from Fluke

CO-205 Aspirator Kit


The CO-205 flue gas sampling accessory kit contains all the components necessary to provide a clean sample for the Fluke family of gas measuring devices. The CO-205 accessory kit includes: Stainless steel sampling tube Industrial-grade hand operated aspirator to draw flue sample Easily replaceable particulate filter Specially designed nose cap for connection to the Fluke CO-210/CO-220.

Ordering Information Fluke-983 Particle Counter Fluke-CO-205 Aspirator Kit Fluke-CO-210 Carbon Monoxide Probe Fluke-CO-220 Carbon Monoxide Meter

CO-210 Carbon Monoxide Probe

Used as an accessory to a digital multimeter with DC millivolt inputs Displays CO level readings from 0 to 999 ppm, with a resolution of 1 ppm and accuracy of 3 %. Also used as a standalone device with an LED indicator and beeper that triggers with increasing frequency as CO levels rise.

Fluke. Keeping your world up and running.


Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or Fax (31 40) 2 675 222 In Canada (800) 36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com/
2005 Fluke Corporation. All rights reserved. Printed in U.S.A. 1/2005 2423343 D-US-N Rev A

CO-220 Carbon Monoxide Meter

Standalone CO meter that does not require a digital multimeter Large backlit LCD displays CO levels from 0 to 1000 ppm. Beeper triggers with increasing frequency as CO levels rise. MAX hold function stores and displays the maximum CO level. Automatic sensor zeroing and self-test upon startup.

You might also like