Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Quick-Start Guide: Irlinc Receiver - Ir To Insteon Converter

    Uploaded by

    IBJSC.com
    IRLinc(tm) Receiver - IR to INSTEON(r) Converter converts infrared (IR) signals from an included credit card remote and / or a universal IR remote into INSTEON signals. Control up to 12 scenes / devices from the tiny credit card remote or even more from a universal remote.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Quick-Start Guide: Irlinc Receiver - Ir To Insteon Converter

    Uploaded by

    IBJSC.com
    25 views1 page
    IRLinc(tm) Receiver - IR to INSTEON(r) Converter converts infrared (IR) signals from an included credit card remote and / or a universal IR remote into INSTEON signals. Control up to 12 scenes / devices from the tiny credit card remote or even more from a universal remote.

    Original Title

    2411rqs

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    IRLinc(tm) Receiver - IR to INSTEON(r) Converter converts infrared (IR) signals from an included credit card remote and / or a universal IR remote into INSTEON signals. Control up to 12 scenes / devices from the tiny credit card remote or even more from a universal remote.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views1 page

    Quick-Start Guide: Irlinc Receiver - Ir To Insteon Converter

    Uploaded by

    IBJSC.com
    IRLinc(tm) Receiver - IR to INSTEON(r) Converter converts infrared (IR) signals from an included credit card remote and / or a universal IR remote into INSTEON signals. Control up to 12 scenes / devices from the tiny credit card remote or even more from a universal remote.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Quick-Start Guide

    Model: 2411R
    Introduction

    Pass-through outlet

    IRLinc Receiver IR to INSTEON Converter


    IR sensor Set button Status LED

    Converts infrared (IR) signals from an included credit card remote and/or a universal IR remote into INSTEON signals. IRLinc is compatible with most universal IR remote controls that come preprogrammed with codes to support many different audio-video products. Controls up to 12 scenes/devices from the tiny credit card remote or even more from a universal remote.

    Talk-back LED 1/8 mini plug

    Credit card remote

    Installation
    1) 2) 3) 4) 5) Mount the IR sensor where it will be in the line of sight of the IR remote you plan to use. Be sure to mount the sensor within 6 feet of an outlet, unless you plan to use an extension cord to power IRLinc. Plug IRLinc into an unswitched wall outlet Plug the IR sensors mini-plug into the jack on the bottom of IRLinc If you are using a universal remote, see the Owners Manual for further installation and Linking instructions. If you are using the included credit card remote, remove its battery isolation tab and proceed to Linking IRLinc Receiver as a Controller OPTIONAL: You can use the pass-through outlet on the front of IRLinc as you would an ordinary uncontrolled wall outlet. However, do not plug another home automation product into this outlet.

    Using the Credit Card Remote


    Scene Control Buttons These buttons are pre-paired with each other, such that when you Link an INSTEON device to the Up arrow, the Down arrow will also control that device. Tap the Up arrow to activate the scene Tap the Down arrow to deactivate the scene Press & hold the Up arrow to brighten the scene Press & hold the Down arrow to dim the scene Scene Activation Buttons These buttons provide smooth and simple scene transitions for when a scene doesnt need an OFF command Tap to easy trigger a scene Press & hold to toggle between brightening or dimming the scene All On/Off Buttons These buttons automatically control all devices Linked to any scene in IRLinc for quick, whole-home control Tap the On button to turn on all devices Linked to IRLinc Tap the Off button to turn off all devices Linked to IRLinc Add/Remove Buttons These buttons save time by putting IRLinc into Linking / Unlinking Mode without the need to press & hold the Set button on IRLinc itself Press & hold the To Scene button for 3 seconds to put IRLinc into Linking Mode Press & hold the From Scene button for 3 seconds to put IRLinc into Unlinking Mode

    Linking IRLinc as a Controller


    1) 2) 3) 4) On the credit card remote, press & hold the To Scene button for 3 seconds The blue IRLinc Status LED should flash once Point the credit card remote at IRLinc from a distance of 6 inches or more and tap the button you want to be learned The blue IRLinc Status LED should begin blinking Press & hold the Responders Set button for 3 seconds The blue IRLinc Status LED should stop blinking and turn on solid Confirm that Linking was successful by tapping the button you just Linked to on the remote The Responder should respond appropriately

    Complete Instructions, Troubleshooting, and Tech Support


    Owners Manual: www.smarthome.com/manuals/2411R.pdf Call: INSTEON Gold Support Line at 800-762-7845
    *Setup Modes will automatically time out after 4 minutes.
    Page 1 of 1 Rev. 03-09-2011
    Smarthome Limited Warranty Smarthome warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be free from defects in material & workmanship & will perform in substantial conformity with its Owner's Manual. Warranty shall not apply to defects caused by misuse or neglect. U.S. Patent No. 7,345,998, International patents pending Copyright 2011 Smarthome, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845

    You might also like