Scribd Logo
Upload

Welcome to Scribd!

  • 487 views

    MEG (Monoethylene Glycol)

    Uploaded by

    Lakshman Naik
    MEG (Monoethylene Glycol) is a colorless, virtually odorless liquid with a low volatility. It is miscible with water and many organic compounds. MEG has properties including a molecular weight of 62.08 g/mol and freezing and boiling points of -13°C and 197°C respectively. MEG is mainly used in the production of polyester, polyethylene terephthalate and antifreeze solutions. It requires storage and shipping in stainless steel or epoxy coated tanks and packaging in lined steel drums or tankers to avoid contamination.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    MEG (Monoethylene Glycol)

    Uploaded by

    Lakshman Naik
    487 views3 pages
    MEG (Monoethylene Glycol) is a colorless, virtually odorless liquid with a low volatility. It is miscible with water and many organic compounds. MEG has properties including a molecular weight of 62.08 g/mol and freezing and boiling points of -13°C and 197°C respectively. MEG is mainly used in the production of polyester, polyethylene terephthalate and antifreeze solutions. It requires storage and shipping in stainless steel or epoxy coated tanks and packaging in lined steel drums or tankers to avoid contamination.

    Original Description:

    MEG

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MEG (Monoethylene Glycol) is a colorless, virtually odorless liquid with a low volatility. It is miscible with water and many organic compounds. MEG has properties including a molecular weight of 62.08 g/mol and freezing and boiling points of -13°C and 197°C respectively. MEG is mainly used in the production of polyester, polyethylene terephthalate and antifreeze solutions. It requires storage and shipping in stainless steel or epoxy coated tanks and packaging in lined steel drums or tankers to avoid contamination.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    487 views3 pages

    MEG (Monoethylene Glycol)

    Uploaded by

    Lakshman Naik
    MEG (Monoethylene Glycol) is a colorless, virtually odorless liquid with a low volatility. It is miscible with water and many organic compounds. MEG has properties including a molecular weight of 62.08 g/mol and freezing and boiling points of -13°C and 197°C respectively. MEG is mainly used in the production of polyester, polyethylene terephthalate and antifreeze solutions. It requires storage and shipping in stainless steel or epoxy coated tanks and packaging in lined steel drums or tankers to avoid contamination.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    2/24/13

    MEG (Monoethylene Glycol)

    MEG (MONOETHYLENE GLYCOL)


    FORMULA C 2 H6 O 2 DESCRIPTION Monoethylene glycol (Ethylene glycol) is a colorless, virtually odorless and slightly viscous liquid. It is miscible with water, alcohols, aldehydes and many organic compounds. MEG will not dissolve rubber, cellulose acetate or heavy vegetable and petroleum oils. MEG has a low volatility and it is 50% more hygroscopic than glycerol at room temperature. PROPERTIES Parameter Molecular weight Boiling point Freezing point Viscosity Specific heat CAS number IUPAC name Unit g/mol C C cp (at 20C) at 0C (cal/gm/C) 107-21-1 Ethane-1,2-diol Quantity 62.08 197 -13 20 0.543

    SPECIFICATIONS MEG Drum or Truck Shipment Parameter Purity Appearance Specific gravity Water Acidity (as acetic acid) Color Iron (Fe) Chloride Ash Unit wt % visual at 20C/20C wt % wt % APHA ppm, wt ppm, wt wt % Quantity 99.9 min. clear 1.1153-1.1156 0.2 max. 0.002 max. 10 max. 0.5 max. 0.5 max. 0.01 max. Test Method ASTM E-2409 ASTM E-2680 ASTM D-4052 ASTM D-1064 ASTM D-1613 ASTM D-1209 ASTM E-394 ASTM E-2469 ASTM D-482

    MEG Bulk shipment, Fiber grade Parameter Unit Quantity / Description 99.9 min. ASTM E-2409
    1/3

    Purity wt % www.sabic.com/corporate/en/productsandservices/chemicals/meg.aspx

    2/24/13

    MEG (Monoethylene Glycol)

    Purity Appearance Specific gravity Distillation range Water DEG Content Acidity (as acetic acid) Color Iron (Fe) UN Transmittance: Wave length % 220 Wave length % 275 Wave length % 350 Aldehyde (as acetaldehyde) Chloride Ash PH

    wt % visual at 20C/20C C (at 760 mmHg) wt % wt % wt % APHA ppm, wt nm nm nm ppm, wt ppm, wt wt % at 20C

    99.9 min. clear 1.1153-1.1156 196 - 199 0.05 max. 0.05 max. 0.001 max. 5 max. 0.10 max. 70 min. 90 min. 98 min. 10 max. 0.5 max. 0.001 max. 6.5-7.5

    ASTM E-2409 ASTM E-2680 ASTM D-4052 ASTM D-1078 ASTM E-1064 ASTM D-2409 ASTM D-1613 ASTM D-1209 ASTM E-394 ASTM E-2193 ASTM E-2193 ASTM E-2193 ASTM E-2313 ASTM E-2469 ASTM D-482 ASTM D-1287

    HAZARDS AND SAFETY MEG is not considered to be a health hazard when handled under normal industry conditions. It has a relatively low degree of acute and chronic oral toxicity and the average fatal dose is 100 ml for adults. It is only slightly irritating to the eyes and skin. Parameter UN or ID NO. Unit Quantity 1142

    APPLICATIONS MEG is mainly used in the production of polyester, polyethylene terephthalate (PET) and antifreeze solutions. It is an important dehydrating agent, good humectant and an industrial solvent. STORAGE AND HANDLING MEG is stored and shipped in stainless steel tanks (or in ordinary steel drums/tanks with epoxy resin coating) to avoid iron contamination. Where contamination by iron is desirable, metal in contact with the glycol should be aluminum or stainless steel (type 304/316). If contamination by halides is undesirable, the packing of the valves and the gaskets should be made of asbestos or other halide-free materials. Also, an inert gas (nitrogen) blanketing should be maintained to avoid oxygen contact which is a main course of U.V. deterioration. PACKAGING MEG is loaded after thorough cleaning and drying of tanks and nitrogen purging to ensure that it remains
    www.sabic.com/corporate/en/productsandservices/chemicals/meg.aspx 2/3

    2/24/13

    MEG (Monoethylene Glycol)

    chloride, iron, and ash-free. Shipments are made in tanks, tankers of varying capacities and in lined steel drums (220 liters). Precautionary labeling: Ethylene Glycol. For Industrial Use Only. Harmful or Fatal if Swallowed. OPERATING COMPANIES

    Back

    www.sabic.com/corporate/en/productsandservices/chemicals/meg.aspx

    3/3

    You might also like