MPF930, MPF960, MPF990 Small Signal MOSFET 2 Amps, 35, 60, 90 Volts
MPF930, MPF960, MPF990 Small Signal MOSFET 2 Amps, 35, 60, 90 Volts
Preferred Device
http://onsemi.com
2 AMPERES 35, 60, 90 VOLTS RDS(on) = 0.7 (MPF930) RDS(on) = 0.8 (MPF960) RDS(on) = 1.2 (MPF990)
NChannel D
Thermal Resistance JA 125 C/W 1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%.
1 Source 2 Gate Y WW
3 Drain
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
OFF CHARACTERISTICS
DrainSource Breakdown Voltage (VGS = 0, ID = 10 Adc) V(BR)DSX MPF930 MPF960 MPF990 IGSS 35 60 90 50 nAdc Vdc
SMALLSIGNAL CHARACTERISTICS
Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Forward Transconductance (VDS = 25 Vdc, ID = 0.5 Adc) Ciss Crss Coss gfs 200 70 20 49 380 pF pF pF mmhos
SWITCHING CHARACTERISTICS
TurnOn Time TurnOff Time 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%. ton toff 7.0 7.0 15 15 ns ns
http://onsemi.com
2
50
ORDERING INFORMATION
Device
MPF930 MPF930RLRE MPF930A MPF930ARLRE MPF960 MPF960RLRA MPF990 MPF990RLRA MPF990RLRP
Package
TO92 TO92 TO92 TO92 TO92 TO92 TO92 TO92 TO92
Shipping
1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 2000 Ammo Pack
http://onsemi.com
3
2.4 ID(on), DRAIN CURRENT (AMPS) VDS = 10 V ID(on), DRAIN CURRENT (AMPS) 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 0 1.0 6.0 7.0 8.0 2.0 3.0 4.0 5.0 VGS, GATE-SOURCE VOLTAGE (VOLTS) 9.0 10
VGS = 10 V 9.0 V 8.0 V 7.0 V 6.0 V 5.0 V 4.0 V 10 20 30 40 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 50
2.8 ID(on), DRAIN CURRENT (AMPS) 2.4 2.0 1.6 1.2 0.8 0.4 0.2 0 0.5
5.0
http://onsemi.com
4
A R P L
SEATING PLANE
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 ---
X X G H V
1
D J C SECTION XX N N
DIM A B C D G H J K L N P R V
http://onsemi.com
5
Notes
http://onsemi.com
6
Notes
http://onsemi.com
7
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com
8
MPF930/D
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.