Concept Development Studies in Chemistry
Concept Development Studies in Chemistry
Concept Development Studies in Chemistry
CONNEXIONS
Rice University, Houston, Texas
This selection and arrangement of content as a collection is copyrighted by John S. Hutchinson. It is licensed under the Creative Commons Attribution 2.0 license (http://creativecommons.org/licenses/by/2.0/). Collection structure revised: December 6, 2007 PDF generated: October 25, 2012 For copyright and attribution information for the modules contained in this collection, see p. 203.
Table of Contents
1 Preface to Concept Development Studies in Chemistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 The Atomic Molecular Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Relative Atomic Masses and Empirical Formulae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 The Structure of an Atom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 Quantum Energy Levels In Atoms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 6 Covalent Bonding and Electron Pair Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7 Molecular Geometry and Electron Domain Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 8 Molecular Structure and Physical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 9 Chemical Bonding and Molecular Energy Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 10 Energetics of Chemical Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 11 The Ideal Gas Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 103 12 The Kinetic Molecular Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 13 Phase Equilibrium and Intermolecular Interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 14 Reaction Equilibrium in the Gas Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 15 Acid-Base Equilibrium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 16 Reaction Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 17 Equilibrium and the Second Law of Thermodynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Attributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
iv
Chapter 1
Preface to Concept Development Studies in Chemistry
1
learning. In each concept development study, a major chemical concept is developed and rened by analysis of experimental observations and careful reasoning.
Foundation of assumed knowledge, followed by a statement of questions which arise from the Foundation. Analysis of these questions is presented as a series of observations and logical deductions, followed by
further questions. This detailed process is followed until the conceptual development of a model provides a reasonable answer to the stated questions.
Concept Development Studies in Chemistry is written with two benets to the reader in mind. First, by constructing each signicant concept through observation and critical reasoning, you will gain a much deeper understanding of that concept. In addition to knowing how to work with a model, you will have both an understanding of why the model is believable and an appreciation of the essential beauty of the model. It will make sense to you in your own terms. Second, the reasoning required to understand these concept development studies will enhance your development of critical, analytical thinking, a skill which is most important to success in Science. As a note, these studies are not intended to be historical developments, although the experiments presented are the ones which led to the concepts discussed. Only a small amount of historical information has been included for perspective.
1 This
to be read slowly and meticulously. Each sentence contains substance to be studied and understood. You should, at each step in the analysis, challenge yourself as to whether you can reproduce the reasoning leading to the next conclusion. One good way to do this is to outline the concept development study, making sure you understand how each piece of the argument contributes to the development of a concept or model. It is very important to understand that scientic models and theories are almost never "proven," unlike mathematical theorems. Rather, they are logically developed and deduced to provide simple explanations of observed phenomenon. As such, you will discover many times in these concept development studies when a conclusion is not logically required by an observation and a line of reasoning. Instead, we may arrive at a model which is the simplest explanation of a set of observations, even if it is not the only one. Scientists most commonly abide by the principle of which requires the least assumptions is the best one. One very important way to challenge your understanding is to study in a group in which you take turns explaining the development of the model. The ability to explain a concept is a much stronger indicator of your understanding than the ability to solve a problem using the concept. Use the questions at the end of the concept development studies to practice your skill at explaining technical arguments clearly and concisely.
1.4 Acknowledgments
My own thinking in writing Concept Development Studies in Chemistry has been strongly inuenced by three books: by John Hudson;
The Historical Development of Chemical Concepts, by Roman Mierzecki; The History of Chemistry, Chemical Principles, by Richard Dickerson, Harry Gray, and Gilbert Haight.
I am deeply appreciative of the contributions of Joanna Fair, Karen Aiani Stevens, Kevin Ausman, Karin Wright, and Susan Wiediger in reviewing and criticizing early drafts of the manuscript for this text. The 2012 editions of these modules were written with signicant assistance from Carrie Obenland, Lesa Tran, Carolyn Nichol, and Kristi Kincaid. I appreciate the hard work of Jerey Silverman and Denver Greene to convert these documents for use in the Connexions Project
2 at Rice University3 .
Concept Development Studies in Chemistry would not have been written were it not for the loving encouragement of my wife Paula, who reminded me continually over many years and particularly at the most dicult of times that writing it was the right thing to do. I will be forever grateful. If this book is of any assistance to you in understanding Chemistry, your thanks must go to Paula. JSH July 2012
Vision Impaired Access: Thanks to the translation eorts of Rice University's Disability Support
Services
5 to
download a .zip le containing all the necessary .dxb and image les.
Chapter 2
The Atomic Molecular Theory
1
2.1 Foundation
There are over 18 million known substances in our world. are made from
that we have identied all of these elements, and that there a very small number of them. All other pure substances, which we call elements. For example, metallic iron and gaseous oxygen are both elements and cannot be reduced into
compounds, are made up from these elements and can be decomposed into these Law of Conservation of Mass.
simpler substances, but iron rust, or ferrous oxide, is a compound which can be reduced to elemental iron and oxygen. The elements are not transmutable: one element cannot be converted into another. Finally, we will assume that we have demonstrated the
Law 2.1:
The total mass of all products of a chemical reaction is equal to the total mass of all reactants of that reaction. These statements are summaries of many observations, which required a tremendous amount of experimentation to achieve and even more creative thinking to systematize as we have written them here. the atomic-molecular theory. By making these assumptions, we can proceed directly with the experiments which led to the development of
2.2 Goals
The statements above, though correct, are actually more vague than they might rst appear. For example, exactly what do we mean when we say that all materials are made from elements? Why is it that the elements cannot be decomposed? What does it mean to combine elements into a compound? We want to understand more about the nature of elements and compounds so we can describe the processes by which elements combine to form compounds, by which compounds are decomposed into elements, and by which compounds are converted from one to another during chemical reactions. One possibility for answering these questions is to assume that a compound is formed when indestructible elements are simply mixed together, as for example, if we imagine stirring together a mixture of sugar and sand. Neither the sand nor the sugar is decomposed in the process. And the mixture can be decomposed back into the original components. In this case, though, the resultant mixture exhibits the properties of
both components:
1 This
for example, the mixture would taste sweet, owing to the sugar component, but gritty,
exhibit elemental iron's color, density, hardness, magnetism, etc. Since the properties of the elements are not maintained by the compound, then the compound must not be a simple mixture of the elements. We could, of course, jump directly to the answers to these questions by stating that the elements themselves are comprised of atoms: indivisible, identical particles distinctive of that element. Then a compound is formed by combining the atoms of the composite elements. Certainly, the Law of Conservation of Mass would be easily explained by the existence of immutable atoms of xed mass. However, if we do decide to jump to conclusions and assume the existence of atoms without further evidence (as did the leading chemists of the seventeenth and eighteenth centuries), it does not lead us anywhere. What happens to iron when, after prolonged heating in air, it converts to iron rust? Why is it that the resultant combination of iron and air does not maintain the properties of either, as we would expect if the atoms of each are mixed together? An atomic view of nature would not yet provide any understanding of how the air and the iron have interacted or combined to form the new compound, and we can't make any predictions about how much iron will produce how much iron rust. There is no basis for making any statements about the properties of these atoms. We need further observations.
Law 2.2:
When two or more elements combine to form a compound, their masses in that compound are in a xed and denite ratio. These data help justify an atomic view of matter. We can simply argue that, for example, lead sulde is formed by taking one lead atom and combining it with one sulfur atom. If this were true, then we also must conclude that the ratio of the mass of a lead
lead to sulfur mass ratio we found for the bulk lead sulde. This atomic explanation looks like the denitive answer to the question of what it means to combine two elements to make a compound, and it should even permit prediction of what quantity of lead sulde will be produced by a given amount of lead. For example, 6.5g of lead will produce exactly 7.5g of lead sulde, 50g of lead will produce 57.7g of lead sulde, etc. There is a problem, however. We can illustrate with three compounds formed from hydrogen, oxygen, and nitrogen. The three mass proportion measurements are given in the following table (Table 2.1: Mass Relationships for Hydrogen, Nitrogen, Oxygen Compounds). First we examine nitric oxide, to nd that the mass proportion is 8 : 7 oxygen to nitrogen. If this is one nitrogen atom combined with one oxygen atom, we would expect that the mass of an oxygen atom is 8/7=1.14 times that of a nitrogen atom. Second we examine ammonia, which is a combination of nitrogen and hydrogen with the mass proportion of 7 : 1.5 nitrogen to hydrogen. If this is one nitrogen combined with one hydrogen, we would expect that a nitrogen atom mass is 4.67 times that of a hydrogen atom mass. These two expectations predict a relationship between the mass of an oxygen atom and the mass of a hydrogen atom. If the mass of an oxygen atom is 1.14 times the mass
of a nitrogen atom and if the mass of a nitrogen atom is 4.67 times the mass of a hydrogen atom, then we must conclude that an oxygen atom has a mass which is 1.14 But there is a problem with this calculation.
Relationships for Hydrogen, Nitrogen, Oxygen Compounds) shows that the compound formed from hydrogen and oxygen is water, which is found to have mass proportion 8:1 oxygen to hydrogen. Our expectation should then be that an oxygen atom mass is 8.0 times a hydrogen atom mass. Thus the three measurements in the following table (Table 2.1: Mass Relationships for Hydrogen, Nitrogen, Oxygen Compounds) appear to lead to contradictory expectations of atomic mass ratios. How are we to reconcile these results?
Mass Relationships for Hydrogen, Nitrogen, Oxygen Compounds Compound Total Mass of Mass of Mass of Mass Hydrogen Nitrogen Oxygen "Expected" Relative Atomic Mass of Hydrogen
-
15.0 g
7.0 g
8.0 g
8.5 g 9.0 g
1.5 g 1.0 g
7.0 g -
8.0 g
Table 2.1
1.5 1.0
7.0 -
8.0
One possibility is that we were mistaken in assuming that there are atoms of the elements which combine to form the dierent compounds. If so, then we would not be surprised to see variations in relative masses of materials which combine. Another possibility is that we have erred in our reasoning. Looking back, we see that we have to assume how many atoms of each type are contained in each compound to nd the relative masses of the atoms. In each of the above examples, we assumed the ratio of atoms to be 1:1 in each compound. If there are atoms of the elements, then this assumption must be wrong, since it gives relative atomic masses which dier from compound to compound. How could we nd the correct atomic ratios? It would help if we knew the ratio of the atomic masses: for example, if we knew that the oxygen to hydrogen mass ratio were 8:1, then we could conclude that the atomic ratio in water would be 1 oxygen and 1 hydrogen. Our reasoning seems to circular: to know the atomic masses, we must know the
of each type), but to know the formula we must know the masses. Which of these possibilities is correct? Without further observations, we cannot say for certain whether matter is composed of atoms or not.
These new mass ratio numbers are highly suggestive in the following way. relationship:
we took the ratio of oxygen mass to a nitrogen mass of 1, and that the resultant ratios have a very simple
= =
2 : 1 : 0.5 4:2:1
(2.1)
The masses of oxygen appearing in these compounds are in simple whole number ratios when we take a xed amount of nitrogen. The appearance of these simple whole numbers is very signicant. These integers imply that the compounds contain a multiple of a xed unit of mass of oxygen. The simplest explanation for this xed unit of mass is that oxygen is
particulate.
atom.
We now assume
that the compounds have been formed from combinations of atoms with xed masses, and that dierent compounds have diering numbers of atoms. The mass ratios make it clear that oxide B contains twice as many oxygen atoms (per nitrogen atom) as does oxide C and half as many oxygen atoms (per nitrogen atom) as does oxide A. The simple mass ratios must be the result of the simple ratios in which atoms combine into molecules. If, for example, oxide C has the molecular formula and oxide A has the formula oxide A has formula formula
N O,
N O4 .
N O2 , N O, then
N O2 ,
N2 O .
N O,
N2 O
N4 O.
Oxide C is N O
N O4 N O2 NO
Oxide B is N O
N O2 NO N2 O
Table 2.2
Oxide A is N O
NO N2 O N4 O
We don't have a way (from these data) to know which of these sets of molecular formulae are right. But we can assert that either one of them or one analogous to them is right. Similar data are found for any set of compounds formed from common elements. For example, there are two oxides of carbon, one with oxygen to carbon mass ratio 1.33:1 and the other with mass ratio 2.66:1. The second oxide must have twice as many oxygen atoms, per carbon atom, as does the rst. The general statement of this observation is the
Law 2.3:
When two elements combine to form more than one compound, the mass of element A which combines in the rst compound with a given amount of element B has a simple whole number ratio with the mass of element A which combines in the second compound with the same given mass of element B. This sounds confusing, but an example claries this statement. Consider the carbon oxides, and let
carbon be element B and oxygen be element A. Take a xed given mass of carbon (element B), say 1 gram. The mass of oxygen which combines with 1 gram of carbon to form the rst oxide is 1.33 grams. The mass of oxygen which combines with 1 gram of carbon to form the second oxide is 2.66. These masses are in ratio
2.66 : 1.33 = 2 : 1,
In explaining our observations of the Law of Multiple Proportions for the carbon oxides and the nitrogen oxides, we have concluded that the simple mass ratio arises from the simple ratio of atoms contained in the individual molecules. Thus, we have established the following postulates of the
Theory.
Atomic Molecular
Rule 2.1:
the elements are comprised of identical atoms all atoms of a single element have the same characteristic mass these number and masses of these atoms do not change during a chemical transformation compounds consist of identical molecules formed of atoms combined in simple whole number ratios
Exercise 2.2
Two compounds, A and B, are formed entirely from hydrogen and carbon. Compound A is 80.0% carbon by mass, and 20.0% hydrogen, whereas Compound B is 83.3% carbon by mass and 16.7% hydrogen. Demonstrate that these two compounds obey the Law of Multiple Proportions. Explain why these results strongly indicate that the elements carbon and hydrogen are composed of atoms.
Exercise 2.3
In many chemical reactions, mass does not appear to be a conserved quantity. For example, when a tin can rusts, the resultant rusty tin can has a greater mass than before rusting. When a candle burns, the remaining candle has invariably less mass than before it was burned. Provide an explanation of these observations, and describe an experiment which would demonstrate that mass is actually conserved in these chemical reactions.
Exercise 2.4
An unknown non-metal element (Q) forms two gaseous uorides of unknown molecular formula. A 3.2 g sample of Q reacts with uorine to form 10.8 g of the unknown uoride A. A 6.4 g sample of Q reacts with uorine to form 29.2 g of unknown uoride B. Using these data only, demonstrate by calculation and explanation that these unknown compounds obey the Law of Multiple Proportions.
A student responded with the following answer:
The Law of Multiple Proportions states that when two elements form two or more compounds, the ratios of the masses of the elements between the two compounds are in a simple whole number ratio. So, looking at the data above, we see that the ratio of the mass of element Q in compound A to the mass of element Q in compound B is 3.2 : 6.4 = 1 : 2, which is a simple whole number ratio. This demonstrates that these compounds obey the Law of Multiple Proportions.
Assess the accuracy of the students answer. In your assessment, you must determine what information is correct or incorrect, provide the correct information where needed, explain whether the reasoning is logical or not, and provide logical reasoning where needed.
Chapter 3
Relative Atomic Masses and Empirical Formulae
1
3.1 Foundation
We begin by assuming the central postulates of the
Atomic-Molecular Theory.
are comprised of identical atoms; all atoms of a single element have the same characteristic mass; the number and masses of these atoms do not change during a chemical transformation; compounds consist of identical observed natural laws on which this theory is based: the Law of Conservation of Mass, Denite Proportions, and the Law of Multiple Proportions. molecules formed of atoms combined in simple whole number ratios. We also assume a knowledge of the the
Law of
3.2 Goals
We have concluded that atoms combine in simple ratios to form molecules. However, we don't know what those ratios are. In other words, we have not yet determined any molecular formulae. In the second table of Concept Development Study #1 (Table 2.2: Possible Molecular Formulae for Nitrogen Oxides), we found that the mass ratios for nitrogen oxide compounds were consistent with many dierent molecular formulae. A glance back at the nitrogen oxide data shows that the oxide B could be simple ratio. Each of these formulae correspond to dierent possible relative atomic weights for nitrogen and oxygen. Since oxide B has oxygen to nitrogen ratio 1.14 : 1, then the relative masses of oxygen to nitrogen could be 1.14:1 or 2.28:1 or 0.57:1 or many other simple possibilities. If we knew the relative masses of oxygen and nitrogen atoms, we could determine the molecular formula of oxide B. On the other hand, if we knew the molecular formula of oxide B, we could determine the relative masses of oxygen and nitrogen atoms. If we solve one problem, we solve both. Our problem then is that we need a simple way to "count" atoms, at least in relative numbers.
N O, N O2 , N2 O,
or any other
1 This
10
two volumes is complete, with no left over hydrogen and oxygen, and that 2 liters of water vapor are formed. Note that the total volume is not conserved: 3 liters of oxygen and hydrogen become 2 liters of water vapor. (All of the volumes are measured at the same temperature and pressure.) More notable is the fact that the ratios of the volumes involved are simple whole number ratios: 1 liter of oxygen : 2 liters of hydrogen : 2 liters of water. This result proves to be general for reactions involving gases. For example, 1 liter of nitrogen gas reacts with 3 liters of hydrogen gas to form 2 liters of ammonia gas. 1 liter of hydrogen gas combines with 1 liter of chlorine gas to form 2 liters of hydrogen chloride gas. These observations can be generalized into the
Law 3.1:
When gases combine during a chemical reaction at a xed pressure and temperature, the ratios of their volumes are simple whole number ratios. These simple integer ratios are striking, particularly when viewed in the light of our conclusions from the Law of Multiple Proportions. Atoms combine in simple whole number ratios, and evidently, volumes of gases also combine in simple whole number ratios. Why would this be? One simple explanation of this similarity would be that the volume ratio and the ratio of atoms and molecules in the reaction are the same. In the case of the hydrogen and oxygen, this would say that the ratio of volumes (1 liter of oxygen : 2 liters of hydrogen : 2 liters of water) is the same as the ratio of atoms and molecules (1 atom of oxygen: 2 atoms of hydrogen: 2 molecules of water). For this to be true, equal volumes of gas would have to contain equal numbers of gas particles (atoms or molecules), independent of the type of gas. If true, this means that the volume of a gas must be a direct measure of the number of particles (atoms or molecules) in the gas. This would allow us to "count" the number of gas particles and determine molecular formulae. There seem to be big problems with this conclusion, however. Look back at the data for forming hydrogen chloride: 1 liter of hydrogen plus 1 liter of chlorine yields 2 liters of hydrogen chloride. If our thinking is true, then this is equivalent to saying that 1 hydrogen atom plus 1 chlorine atom makes 2 hydrogen chloride molecules. But how could that be possible? How could we make 2 identical molecules from a single chlorine atom and a single hydrogen atom? This would require us to divide each hydrogen and chlorine atom, violating the postulates of the atomic-molecular theory. Another problem appears when we weigh the gases: 1 liter of oxygen gas weighs more than 1 liter of water vapor. If we assume that these volumes contain equal numbers of particles, then we must conclude that 1 oxygen particle weighs more than 1 water particle. But how could that be possible? It would seem that a water molecule, which contains at least one oxygen atom, should weigh more than a single oxygen particle. These are serious objections to the idea that equal volumes of gas contain equal numbers of particles. Our postulate appears to have contradicted common sense and experimental observation. However, the simple ratios of the Law of Combining Volumes are also equally compelling. Why should volumes react in simple whole number ratios if they do not represent equal numbers of particles? Consider the opposite viewpoint: if equal volumes of gas do not contain equal numbers of particles, then equal numbers of particles must be contained in unequal volumes not related by integers. Now when we combine particles in simple whole number ratios to form molecules, the volumes of gases required would produce decidedly non-whole number ratios. The Law of Combining Volumes should not be contradicted lightly. There is only one logical way out. We will accept our deduction from the Law of Combining Volumes
equal volumes of gas contain equal numbers of particles, a conclusion known as Avogadro's Hypothesis. How do we account for the fact that 1 liter of hydrogen plus 1 liter of chlorine yields 2 liters
that of hydrogen chloride? There is only one way for a single hydrogen particle to produce 2 identical hydrogen chloride molecules: each hydrogen particle must contain more than one atom. In fact, each hydrogen particle (or molecule) must contain an even number of hydrogen atoms. Similarly, a chlorine molecule must contain an even number of chlorine atoms. More explicitly, we observe that 1 liter of hydrogen
+1
liter of chlorine
(3.1)
11
Assuming that each liter volume contains an equal number of particles, then we can interpret this observation as 1 H2 molecule
(3.2)
(Alternatively, there could be any xed even number of atoms in each hydrogen molecule and in each chlorine molecule. We will assume the simplest possibility and see if that produces any contradictions.) This is a wonderful result, for it correctly accounts for the Law of Combining Volumes and eliminates our concerns about creating new atoms. Most importantly, we now know the molecular formula of hydrogen chloride. We have, in eect, found a way of "counting" the atoms in the reaction by measuring the volume of gases which react. This method works to tell us the molecular formula of many compounds. For example, 2 liters of hydrogen
+1
liter of oxygen
liters of water
(3.3)
This requires that oxygen particles contain an even number of oxygen atoms. Now we can interpret this equation as saying that 2 H2 molecules
+ 1 O2 molecule 2 H2 O molecules
Recall from the Table (Table 2.1:
(3.4)
Now that we know the molecular formula of water, we can draw a denite conclusion about the relative masses of the hydrogen and oxygen atoms. Mass Relationships for Hydrogen, Nitrogen, Oxygen Compounds) that the mass ratio in water is 8:1 oxygen to hydrogen. Since there are two hydrogen atoms for every oxygen atom in water, then the mass ratio requires that a single oxygen atom weigh 16 times the mass of a hydrogen atom. To determine a mass scale for atoms, we simply need to choose a standard. For example, for our purposes here, we will say that a hydrogen atom has a mass of 1 on the atomic mass scale. Then an oxygen atom has a mass of 16 on this scale. Our conclusions account for the apparent problems with the masses of reacting gases, specically, that oxygen gas weighs more than water vapor. This seemed to be nonsensical: given that water contains oxygen, it would seem that water should weigh more than oxygen. However, this is now simply understood: a water molecule, containing only a single oxygen atom, has a mass of 18, whereas an oxygen molecule, containing two oxygen atoms, has a mass of 32.
atoms. We assume for now that nitrogen is the molecular formula for oxide B is a mass of 14. (That is
N2 .
O2 .
Therefore,
N O,
the oxygen to nitrogen mass ratio is 1.14 : 1, then, if we assign oxygen a mass of 16, as above, nitrogen has
16 1.14 = 14.) 2 liters of oxide A is formed from 2 liters of oxygen and 1 liter of nitrogen. Therefore, oxide A is N O2 , which we call nitrogen dioxide. Note that we predict an oxygen to nitrogen mass 32 ratio of 14 = 2.28 : 1, in agreement with the data. Oxide C is N2 O , called nitrous oxide, and predicted to 16 have a mass ratio of 28 = 0.57 : 1, again in agreement with the data. We have now resolved the ambiguity in the molecular formulae.
12
N4 ?
N2 O ,
N2 O 2 ,
and
N4 O .
Furthermore, the mass of a nitrogen atom would be 7. Why don't we assume this?
Simply because in doing so, we will always nd that the minimum relative mass of nitrogen in any molecule is 14. Although this might be two nitrogen atoms, there is no reason to believe that it is. Therefore, a single nitrogen atom weighs 14, and nitrogen gas particles are
N2 .
O2 molecule). Since an O2 molecule weighs 32 on our atomic mass 0.875 32 = 28. Now we know the molecular weight of oxide A.
Furthermore, we have already determined from the combining volumes that oxide A contains a single oxygen atom, of mass 16. Therefore, the mass of carbon in oxide A is 12. However, at this point, we do not know whether this is one carbon atom of mass 12, two atoms of mass 6, eight atoms of mass 1.5, or one of many other possibilities. To make further progress, we make additional measurements on other carbon containing gas compounds. 1 liter of oxide B of carbon is formed from 1 liter of oxygen. Therefore, each oxide B molecule contains two oxygen atoms. 1 liter of oxide B weighs 1.375 times as much as 1 liter of oxygen. Therefore, one oxide B molecule has mass
1.375 32 = 44.
Since there are two oxygen atoms in a molecule of oxide B, the mass of
oxygen in oxide B is 32. Therefore, the mass of carbon in oxide B is 12, the same as in oxide A. We can repeat this process for many such gaseous compounds containing carbon atoms. In each case, we nd that the mass of carbon in each molecule is either 12 or a multiple of 12. We never nd, for examples, 6 or 18, which would be possible if each carbon atom had mass 6. The simplest conclusion is that a carbon atom has mass 12. Once we know the atomic mass of carbon, we can conclude that the molecular formula of oxide A is
CO,
CO2 .
Therefore, the atomic masses of non-gaseous elements can be determined by mass and volume measurements on gaseous compounds containing these elements. This procedure is fairly general, and most atomic masses can be determined in this way.
13
of the sample, so we can take any convenient sample to do our analysis. Assuming that we have 100.0g of the compound, we must have 40.0g of carbon, 53.3g of oxygen, and 6.7g of hydrogen. If we could count or otherwise determine the number of atoms of each element represented by these masses, we would have the molecular formula. However, this would not only be extremely dicult to do but also unnecessary. From our determination of atomic masses, we can note that 1 atom of carbon has a mass which is 12.0 times the mass of a hydrogen atom. Therefore, the mass of of
carbon contains exactly the same number of atoms as does 1.0g of hydrogen. Similarly, we note that 1 atom of oxygen has a mass which is
16.0 12.0 times the mass of a carbon atom. Therefore, the mass of N atoms of 16.0 oxygen is times the mass of N atoms of carbon. Again, we can conclude that 16.0g of oxygen contains 12.0 exactly the same number of atoms as 12.0g of carbon, which in turn is the same number of atoms as 1.0g of
hydrogen. Without knowing (or necessarily even caring) what the number is, we can say that it is the same number for all three elements. For convenience, then, we
Note
that 1 mole is a specic number of particles, just like 1 dozen is a specic number, independent of what objects we are counting. The advantage to dening the mole in this way is that it is easy to determine the number of moles of a substance we have, and knowing the number of moles is equivalent to counting the number of atoms (or molecules) in a sample. For example, 24.0g of carbon contains 2.0 moles of atoms, 30.0g
x 12.0 moles of atoms. Also, we recall that 16.0g of oxygen contains exactly as many atoms as does 12.0g of carbon, and therefore 16.0g
of carbon contains 2.5 moles of atoms, and in general,
of oxygen contains exactly 1.0 mole of oxygen atoms. Thus, 32.0g of oxygen contains 2.0 moles of oxygen atoms, 40.0g of oxygen contains 2.5 moles, and more generally, then, if we have atoms,
x 16.0 moles of oxygen atoms. Even grams of an element whose atomic mass is M , the number of moles of
n,
is
n=
m M
(3.5)
Now we can determine the relative numbers of atoms of carbon, oxygen, and hydrogen in our unknown compound above. In a 100.0g sample, we have 40.0g of carbon, 53.3g of oxygen, and 6.7g of hydrogen. The number of moles of atoms in each element is thus
nC
= =
(3.6)
3.33moles
53.3g g 16.0 mol
(3.7)
nO
= =
3.33moles
6.7g g 1.0 mol
(3.8)
nH
= =
6.67moles nC : nO : nH = 1 : 1 : 2.
We note that the numbers of moles of atoms of the elements are in the simple ratio
Since the number of particles in 1 mole is the same for all elements, then it must also be true that the number of atoms of the elements are in the simple ratio 1 : 1 : 2. Therefore, the molecular formula of the compound must be
COH2 .
Or is it? On further reection, we must realize that the simple ratio 1 : 1 : 2 need not represent the exact numbers of atoms of each type in a molecule of the compound, since it is indeed only a ratio. Thus the molecular formula could just as easily be mass ratio data, we refer to this as the
formula, we need to determine the relative mass of a molecule of the compound, i.e.
C2 O2 H4
or
C3 O3 H6 .
COH2
is based on empirical
To determine the
One way to do so is based on the Law of Combining Volumes, Avogadro's Hypothesis, and the
14
Law.
C2 O2 H4 .
15
Exercise 3.2
Explain how the Law of Combining Volumes, combined with the Atomic-Molecular Theory, leads directly to Avogadro's Hypothesis that equal volumes of gas at equal temperatures and pressure contain equal numbers of particles.
Use Avogadro's Hypothesis to demonstrate that oxygen gas molecules cannot be monatomic.
The density of water vapor at room temperature and atmospheric pressure is A is 80.0% carbon by mass, and 20.0% hydrogen. 16.7% hydrogen. The density of gaseous Compound A is
g 0.737 L .
Compound
g 1.227 L , and the density of Compound B g is 2.948 . Show how these data can be used to determine the molar masses of Compounds A and L B, assuming that water has molecular mass 18.
Exercise 3.5
From the results above (Exercise 3.4), determine the mass of carbon in a molecule of Compound A and in a molecule of Compound B. Explain how these results indicate that a carbon atom has atomic mass 12.
Explain how we can conclude that 28g of nitrogen gas (N2 ) contains exactly as many molecules as 32g of oxygen gas (O2 ), even though we cannot possibly count this number.
16
Chapter 4
The Structure of an Atom
1
4.1 Foundation
We begin as a starting point with the atomic molecular theory. We thus assume that most of the common elements have been identied, and that each element is characterized as consisting of identical, indestructible atoms. We also assume that the atomic weights of the elements are all known, and that, as a consequence, it is possible via mass composition measurements to determine the molecular formula for any compound of interest. In addition, we will assume that it has been shown by electrochemical experiments that atoms contain equal numbers of positively and negatively charged particles, called protons and electrons respectively. Finally, we assume an understanding of the Periodic Table. In particular, we assume that the elements can be grouped according to their common chemical and physical properties, and that these chemical and physical properties are periodic functions of the atomic number.
4.2 Goals
The atomic molecular theory is extremely useful in explaining what it means to form a compound from its component elements. That is, a compound consists of identical molecules, each comprised of the atoms of the component elements in a simple whole number ratio. However, our knowledge of these atoms is very limited. The only property we know at this point is the relative mass of each atom. Consequently, we cannot answer a wide range of new questions. We need a model which accounts for the periodicity of chemical and physical properties as expressed in the Periodic Table. Why are elements which are very dissimilar in atomic mass nevertheless very similar in properties? Why do these common properties recur periodically? We would like to understand what determines the number of atoms of each type which combine to form stable compounds. Why are some combinations found and other combinations not observed? Why do some elements with very dissimilar atomic masses (for example, iodine and chlorine) form very similar chemical compounds? Why do other elements with very similar atomic masses (for example, oxygen and nitrogen) form very dissimilar compounds? In general, what forces hold atoms together in forming a molecule? Answering these questions requires knowledge of the structure of the atom, including how the structures of atoms of dierent elements are dierent. Our model should tell us how these structural dierences result in the dierent bonding properties of the dierent atoms.
1 This
18
arranged inside the atom. To determine the location of the charges in the atom, we perform a "scattering" experiment. The idea is straightforward: since we cannot "see" the atomic structure, then we instead "throw" things at the atom and watch the way in which these objects are deected by the atom. Working backwards, we can then deduce what the structure of the atom must be. The atoms we choose to shoot at are gold, in the form of a very thin gold foil of thickness about The objects we "throw" are actually radioactive polonium nuclei. The
104 cm.
both for particles which have been deected as they pass through the foil or which have been reected as they bounce o of the foil. The scattering experiment is illustrated here (Figure 4.1: from Gold Foil).
particle Scattering
Figure 4.1
The result of the experiment is initially counter-intuitive. Most of the sharply as they pass through the foil, and a very small fraction of the
foil undeected, as if there had been nothing in their path! A smaller number of the particles are deected
of the gold foil. How can we simultaneously account for the lack of any deection for most of the and for the deection through large angles of a very small number of particles? First, since the majority of the positively charged
particles
19
can conclude that most of the volume of each gold atom is empty space, containing nothing which might deect an
then they must encounter a positively charged massive particle inside the atom. We therefore conclude that all of the positive charge and most of the mass of an atom is contained in a
nucleus.
be very small, very massive, and positively charged if it is to account for the sharp deections. A detailed calculation based assuming this model reveals that the nucleus must be about 100,000 times smaller than the size of the atom itself. The electrons, already known to be contained in the atom, must be outside of the nucleus, since the nucleus is positively charged. They must move in the remaining space of the much larger volume of the atom. Moreover, in total, the electrons comprise less than 0.05% of the total mass of an atom. This model accounts for observation of both undeected passage most of of a few. Most Even the
particles and sharp deection particles pass through the vast empty space of the atom, which is occupied only by electron. occasional encounter with one of the electrons has no eect on an particle's path, since each
particle with the nucleus will result in very large deections;
particle is much more massive than an electron. However, the nucleus is both massive and positively charged, but it is also small. The rare encounter of an a head-on collision with a gold atom nucleus will send an
(each element) emits a few characteristic frequencies of x-rays, which dier from one atom to the next. The lowest x-ray frequency emitted by each element is found to increase with increasing position in the periodic table. Most amazingly, there is an unexpected relationship between the frequency and the relative mass of each atom. Let's rank order the elements by atomic mass, and assign an integer to each according to its ranking in order by mass. In the Periodic Table, this rank order number also corresponds to the element's position in the Periodic Table. For example, Hydrogen is assigned 1, Helium is assigned 2, etc. If we now plot the lowest frequency versus the position number in the periodic table, we nd that the frequency increases directly as a simple function of the ranking number. This is shown here (Figure 4.2: X-ray Frequencies Versus Atomic Number), where we have plotted the square root of the x-ray frequency as a function of the ranking number. After a single correction, there is a simple straight-line relationship between these numbers. (The single correction is that the rankings of Argon and Potassium must be reversed. These elements have very similar atomic masses. Although Argon atoms are slightly more massive than Potassium atoms, the Periodic Law requires that we place Argon before Potassium, since Argon is a member of the inert gas group and Potassium is a member of the alkali metal group. By switching their order to correspond to the Periodic Table, we can maintain the beautiful relationship shown here (Figure 4.2: X-ray Frequencies Versus Atomic Number).)
20
Figure 4.2
Why is this simple relationship a surprise? The integer ranking of an element by mass would not seem to be a physical property. We simply assigned these numbers in a listing of the elements which we constructed. However, we have discovered that there is a simple quantitative relationship between a real physical quantity (the x-ray frequency) and the ranking number we assigned. Moreover, there are no "breaks" in the straight line shown here (Figure 4.2: X-ray Frequencies Versus Atomic Number), meaning that all of the elements in our mass list must be accounted for. Both observations reveal that the ranking number of each atom must also be a real physical quantity itself, directly related to a structural property of each atom. We now call the ranking number the
Furthermore, we know that each atom must possess an integer number of positive charges. Since the x-ray data demonstrates a physical property, the atomic number, which is also an integer, the simplest conclusion is that the atomic number from the x-ray data is the number of positive charges in the nucleus. Since each atom is neutral, the atomic number must also equal the number of electrons in a neutral atom. We now know a great deal about the structure of an atom. We know that the atom has a nuclear structure, we know that the positive charges and mass of the atom are concentrated in the nucleus, and we know how many protons and electrons each atom has. However, we do not yet know anything about the positioning and movement of the electrons in the vast space surrounding the nucleus.
21
V (r) =
where
(Z) e
(4.1) and
is the distance from the electron to the nucleus. The potential energy of an electron in an atom is negative. This is because we take the potential energy of the electron when removed to great distance from the atom (very large
r)
to be zero, since the electron and the nucleus do not interact at large distance. In order to
remove an electron from an atom, we have to raise the potential energy from its negative value to zero. According to Coulomb's law, we expect electrons closer to the nucleus to have a lower potential energy and thus to require more energy to remove from the atom. We can directly measure how much energy is required to remove an electron from an atom. Without concerning ourselves with how this measurement is made, we simply measure the minimum amount of energy required to carry out the following "ionization reaction":
(4.2)
ion. The minimum energy required to perform the ionization is called the of the atomic number here (Figure 4.3).
ionization energy.
of the ionization energy for each atom in Groups I through VIII of the periodic table are shown as a function
22
Figure 4.3
This gure is very reminiscent of the Periodic Law, which states that chemical and physical properties of the elements are periodic functions of the atomic number. Notice that the elements with the largest ionization energies (in other words, the most tightly bound electrons) are the inert gases. By contrast, the alkali metals are the elements with the smallest ionization energies. In a single period of the periodic table, between each alkali metal atom and the next inert gas atom, the ionization energy rises fairly steadily, falling dramatically from the inert gas to the following alkali metal at the start of the next period. We need a model which accounts for these variations in the ionization energy. A reasonable assumption from Coulomb's law is that these variations are due to variations in the nuclear charge (atomic number) and in the distance of the electrons from the nucleus. To begin, we can make a very crude approximation that the ionization energy is just the negative of this attractive potential energy given by Coulomb's law. This is crude because we have ignored the kinetic energy and because each electron may not have xed value of Nevertheless, this approximation gives a way to analyze this gure (Figure 4.3). number.
r.
Coulomb's law it seems to make sense that the ionization energy should increase with increasing atomic It is easier to remove an electron from Lithium than from Neon because the nuclear charge in Lithium is much smaller than in Neon. But this cannot be the whole picture, because this argument would imply that Sodium atoms should have greater ionization energy than Neon atoms, when in fact Sodium atoms have a very much lower ionization energy. Similarly, although the ionization energy rises as we go from Sodium to Argon, the ionization energy of Argon is still less than that of Neon, even though the nuclear charge in an Argon atom is much greater than the nuclear charge in a Neon atom. What have we omitted
23
from our analysis? The answer is that we must consider also the distance of the electrons from the nucleus. Since it requires much less energy to ionize a Sodium atom than to ionize a Neon atom even though Sodium's nuclear charge is greater, it must be that the electron which we remove from a Sodium atom is much farther from the nucleus than the electron in the Neon atom. We can make the same comparison of the electrons removed during ionization of Neon and Argon atoms: the Argon electron must be farther from the nucleus than the Neon electron. On the other hand, since the ionization energy fairly smoothly increases as we move from Lithium to Neon in the second period of elements, this reveals that the electrons are increasingly attracted to the nucleus for greater nuclear charge and suggests that the electrons' distance from the nucleus might not be varying too greatly over the course of a single period of the table. If we follow this reasoning, we can even estimate how far an electron might typically be from the nucleus by using our crude approximation that the ionization energy is equal to the negative of the Coulomb potential and solving for
for each atom. This gives an estimate of distance of the electron from the nucleus:
rshell =
Values of
((Z) e) (e)
ionization energy
(4.3)
rshell
calculated in this way are shown for the rst 20 elements here (Figure 4.4). Also shown for
comparison is the ionization energy for these elements. Notice that the approximate distance of the electrons from the nucleus increases in steps exactly coinciding with the increases and dips in the ionization energy.
24
Figure 4.4
Although these distances we have calculated do not have a precise physical meaning, this gure (Figure 4.4) suggests a signicant conclusion. The electrons in the elements are arranged into "shells" of increasingly greater distance from the nucleus. Hydrogen and Helium, with one and two electrons, have ionization energies consistent with electrons at similar and close distance from the nucleus. Then the second row elements lithium through neon have virtually identical sizes, though larger than that for the rst two elements. The third row elements, sodium argon, have an approximate electron-nuclear distance which uctuates a bit but is consistently larger than the second row elements. Because the sizes of the atoms appear to grow in steps which correspond exactly to the periods of the Periodic Table, it seems that the electrons in the atoms are grouped into sets which are diering distances away from the nucleus. The rst two electrons, as in Helium, are close to the nucleus, whereas additional electrons, as in Lithium to Neon, are farther from the nucleus than the rst two. outer "shell." We can rene this shell model for the electrons in an atom with further analysis of ionization energies. We can remove any number of electrons in sequence, forming ions with greater charge. We have been examining the rst ionization energy,IE1 , but each successively removed electron has successively greater ionization energy: The suggests that, for atoms Lithium to Neon, the rst two electrons are in an inner "shell", and the remaining electrons are in an
25
The sequential ionization energies for the elements in the second row of the periodic table are shown here (Table 4.1: Successive Ionization Energies (kJ/mol)).
Mg
738 1451 7733 10540 13630 17995 21703
Al
578 1817 2745 11575 14830 18376 23293
Si
787 1577 3231 4356 16091 19784 23783
P
1012 1903 2912 4956 6273 22233 25397
S
1000 2251 3361 4564 7013 8495 27106
Cl
1251 2297 3822 5158 6542 9458 11020
Ar
1520 2665 3931 5770 7238 8781 11995
Table 4.1
Note that the second ionization energy is always greater than the rst, and the third is always greater than the second, etc. This makes sense, since an electron should be more strongly attracted to a positively charged atom than to a neutral atom. However, the data in the table (Table 4.1: Successive Ionization Energies (kJ/mol)) show a surprising feature. In most cases, the ionization energy increases a fairly large amount for successive ionizations. But for each atom, there is one much larger increase in ionization in the sequence. In Na for example, nearly 10 times greater than than twice in IE. Looking closely and counting electrons, we see that this unusually large increase always occurs for the ionization where we have already removed all of the outer shell electrons and are now removing an electron from the inner shell. This occurs uniformly across the second row elements, indicating that our shell model is in fact a very accurate predictor of the higher ionization energies. We can now tell how many electrons there are in the outer shell of each atom: it is equal to the number of electrons since the last inert gas. We can conclude that an inner shell is "lled" once we have the number of electrons equal to the number in an inert gas atom. The subsequent electrons are added to a new outer shell. This is commonly referred to as the
IE2
is
IE1 .
Similarly,
IE3
IE2
IE2
is less
IE1 .
The data for Na through S all show a single large step in addition to the smaller increases
However, we do not know why only a limited number of electrons can reside in each shell. There is no obvious reason at this point why all the electrons in an atom do not reside in the shell closest to the nucleus. Similarly, there is no reason given for why the number of electrons in an inert gas atom exactly lls the outer shell, without room for even a single additional electron. These questions must be addressed further.
26
positively charged nucleus whose size is much smaller than that of the atom.
Explain the signicance of the relationship between the frequency of x-ray emission from each atom and the atomic ranking of that atom in the periodic table.
Provide experimental evidence which reveals that the electrons in an atom are grouped into a valence shell and inner shell electrons.
State and explain the evidence which reveals that the outer shell of each inert gas atom is full.
Why does the ionization energy for each successive ionization increase for every atom? Why is the
IE4
to
IE5
Chapter 5
Quantum Energy Levels In Atoms
1
5.1 Foundation
The atomic molecular theory provides us a particulate understanding of matter. Each element is characterized as consisting of identical, indestructible atoms with atomic weights which have been determined. Compounds consist of identical molecules, each made up from a specic number of atoms of each of the component elements. We also know that atoms have a nuclear structure, meaning that all of the positive charge and virtually all of the mass of the atom are concentrated in a nucleus which is a very small fraction of the volume of the atom. Finally, we know that the electrons in the atom are arranged in "shells" about the nucleus, with each shell farther from the nucleus that the previous. The electrons in outer shells are more weakly attached to the atom than the electrons in the inner shells, and only a limited number of electrons can t in each shell.
5.2 Goals
The shell model of the atom is a good start in understanding the dierences in the chemical properties of the atoms of dierent elements. For example, we can understand the periodicity of chemical and physical properties from our model, since elements in the same group have the same number of electrons in the valence shell. However, there are many details missing from our description. Other than a very crude calculation of "distance" of the shells from the nucleus, we have no description of what the dierences are between the electrons in dierent shells. What precisely is a "shell?" Most importantly, the arrangement of elements into groups and the periodicity of chemical properties both depend on the concept that a shell is "lled" by a certain number of electrons. Looking at the number of elements in each period, the number of electrons which lls a shell depends on which shell is being lled. In some cases, a shell is lled by eight electrons, in others, it appears to be 18 electrons. What determines how many electrons can "t" in a shell? Why is there a limit at all? Finally, a closer look at the ionization energies here (Figure 4.3) reveals that our shell model must be incomplete. Our model implies that the elements of the second period from Lithium to Neon have their valence electrons in the second shell. With increasing nuclear charge, the ionization energy of these atoms should increase from Lithium to Neon. As a general trend, this is true, but there are variations. Note that the ionization energy of Oxygen atoms is less than that of Nitrogen atoms. We need to pursue additional detail in our model of the structure of the atom.
1 This
28
the wave. Dierent wavelengths correspond to dierent forms of electromagnetic radiation. For example,
102
103
10
to
10
Radiation can also be characterized by the frequency of the electromagnetic wave, which is the number of peaks in the wave which pass a point in space per second. Frequency is symbolized by light travels in a vacuum in the same for all forms of electromagnetic radiation, we can relate the frequency of light to the wavelength of light by the equation
(m) s1 = c
The longer the wavelength
m s
travels at a xed speed. When the wavelength is longer, fewer peaks will pass a point in space in a second. From this equation, there is a specic relationship between frequency and wavelength, and either or both can be used to characterize the properties of radiation. With this background in hand, we can use our understanding of light to pursue more data about the energies of electrons in atoms. Ionization energies tell us how much energy is required to remove an electron from an atom, but do not tell what happens if an electron changes its energy in an atom. To analyze this, we need a means to measure the energies gained or lost by an atom. One way to do so is to analyze the "spectrum" of an atom, which is the set of frequencies of light emitted by the atom. Since hydrogen is the simplest atom, we analyze the hydrogen spectrum rst. is emitted by We nd that, if we pass a current of electricity through a sample of hydrogen gas, light is emitted. Careful analysis shows that, although some of this light
H2
molecules, some of the light is also emitted by H atoms. Since light is a form of energy,
then these H atoms must release energy supplied to them by the electrons in the current. Most importantly, if we pass the light emitted by the hydrogen gas sample through a prism, we can separate the colors as in a rainbow, each with a characteristic frequency. The resultant image of separated colors is called the
spectrum of hydrogen.
(four colors) of light in the emission that are visible. The most intense of the lines in the spectrum is bright red, but there are blue and violet lines. It turns out that there are also many other frequencies of light emitted which are invisible to the human eye. Careful observation and analysis reveals that every frequency in the hydrogen atom spectrum can be predicted by a very simple formula, called the Rydberg equation:
=R
where
1 1 2 n2 m
and
1015 s1 ). n
and
predicts a single observed frequency in the hydrogen atom spectrum. The atoms of all elements emit radiation when energized in an electric current, and as do all molecules
of all compounds. However, we nd that the specic frequencies of light emitted are characteristic of each atom or molecule. In other words, the spectrum of each element is unique to each element or compound. As a result, the spectrum of each substance can be used to identify that substance. (Note that the Rydberg equation tells us only the spectrum of hydrogen.) Our interest is in the fact that the radiation emitted by an atom tells us about the amounts of energy which can be released by an atom. For a hydrogen atom, for example, these changes in energy must correspond to the amounts of energy which the electrons inside the atom can gain or lose. At this point, we need to relate the frequency of radiation emitted by an atom to the amount of energy lost by the electron in the atom. We thus examine some observations about the energy of radiation.
29
frequency, 0 .
threshold
0 ,
This frequency is a characteristic for a given metal. That is, it is the same value for each
sample of that metal, but it varies from one metal to the next. For low frequency light, photoelectrons are not observed in any number, no matter how intense the light source is. For light with frequency above the number of photoelectrons emitted by the metal (measured by the photoelectric current,
increases
directly with the intensity of the light. These results are shown in Figure 5.1 (The Photoelectric Eect).
(a)
Figure 5.1:
(b)
is the intensity of
incident light. (a) For photoelectrons to be emitted, the light frequency must be greater than a threshold value. (b) If the frequency is high enough, the number of photoelectrons increases directly with the light intensity.
Second, we can measure the energies of the electrons emitted by the metal. photoelectrons have the same kinetic energy for a xed frequency of light above
0 .
is independent of the intensity of the light source. As the frequency of the light is increased, the kinetic energy of the emitted electrons increases proportionally. These results are shown in Figure 5.2 (More Photoelectric Eect).
30
(a)
Figure 5.2:
(b)
KE
is the
(a) If the frequency is high enough, the energy of the electrons increases
directly with the frequency. (b) However, the energy of the photolectrons does not depend on the light
To the physicists at the end of the nineteenth century, the answer was
yes, very surprising indeed. They expected that the energy of the light source should be determined by its intensity. Hence, the energy required to eject a photoelectron should be supplied by light of high intensity, no matter how low the frequency of the radiation. Thus, there should be no threshold frequency, below which no electrons are emitted. Moreover, the kinetic energy of the electrons should increase with intensity, not with light frequency. These predictions are not observed, so the results are counter to physical intuition. We can account for these results in a straightforward but perhaps non-obvious manner. (Einstein provided the explanation in 1905.) Since the kinetic energy of the emitted photoelectrons increases proportionally with increases in the frequency of the light above the threshold frequency, we can conclude from conservation of total energy that the energy supplied by the light to the ejected electron must be proportional to its frequency:
E .
This does not immediately account for the existence of the threshold frequency, though, since it By this reasoning, high intensity, low frequency light should therefore produce as many
would still seem to be the case that even low frequency light would possess high energy if the intensity were sucient. photoelectrons as are produced by low intensity, high frequency light. But this is not observed. This is a very challenging puzzle, and an analogy helps to reveal the subtle answer. Imagine trying to knock pieces out of a wall by throwing objects at it. We discover that, no matter how many ping pong balls we throw, we cannot knock out a piece of the wall. On the other hand, only a single bowling ball is required to accomplish the task. The results of this "experiment" are similar to the observations of the photoelectric eect: very little high frequency light can accomplish what an enormous amount of low frequency light cannot. The key to understanding our imaginary experiment is knowing that, although there are many more ping-pong balls than bowling balls, it is only the impact of each individual particle with the wall which determines what happens. Reasoning from this analogy, we must conclude that the energy of the light is supplied in "bundles" or "packets" of constant energy, which we will call
photons.
energy to the electron which is proportional to the light frequency. Now we can say that the energy of each
31
photon is proportional to the frequency of the light. The intensity of the light is proportional to the number of these packets. This now accounts for the threshold frequency in a straightforward way. For a photon to dislodge a photoelectron, it must have sucient energy, by itself, to supply to the electron to overcome its attraction to the metal. Although increasing the intensity of the light does increase the total energy of the light, it does not increase the energy of an individual photon. Therefore, if the frequency of the light is too low, the photon energy is too low to eject an electron. Referring back to the analogy, we can say that a single bowling bowl can accomplish what many ping-pong balls cannot, and a single high frequency photon can accomplish what many low frequency photons cannot. The important conclusion for our purposes is that
E = h
where
loss
light energy is quantized into packets. Furthermore, since only certain frequencies are observed, then only certain energy losses are possible. This is only reasonable if the energy of each hydrogen atom is restricted to certain specic values. If the hydrogen atom could possess any energy, then it could lose any amount of energy and emit a photon of any energy and frequency. But this is not observed. Therefore, the energy of the electron in a hydrogen atom must be restricted to certain
energy levels.
The Hydrogen atom spectrum also tells us what these energy levels are. Recall that the frequencies of radiation emitted by Hydrogen atoms are given by the Rydberg equation (5.2). Each choice of the positive integers
and
dierence between two energy levels for a hydrogen electron, since that is the amount
This photon
of energy released by the electron moving from one level to the other. If the energies of the two levels are
Em
and
En ,
h = Em En
By comparing this to the Rydberg equation, each energy level must be given by the formula
(5.4)
En = (h) R
1 n2
(5.5)
We can draw two conclusions. First, the electron in a hydrogen atom can exist only with certain energies, corresponding to motion in what we now call a state or an characterized by an integer
orbital. Second, the energy of a state can be quantum number, n = 1, 2, 3, ... which determines its energy.
These conclusions are reinforced by similar observations of spectra produced by passing a current through other elements. Only specic frequencies are observed for each atom, although only the hydrogen frequencies obey the Rydberg formula. We conclude that the energies of electrons in atoms are "quantized," that is, restricted to certain values. We now need to relate this quantization of energy to the existence of shells, as developed in a previous study (Chapter 4).
32
photoionization.
the minimum frequency of light, corresponding to a minimum energy, which will ionize an electron from an atom. When the frequency of light is too low, the photons in that light do not have enough energy to ionize electrons from an atom. As we increase the frequency of the light, we nd a threshold at which electrons begin to ionize. Above this threshold, the energy
required to ionize the atom, and the excess energy is retained by the ionized electron as kinetic energy. In photoelectron spectroscopy, we measure the kinetic energy of the electrons which are ionized by light. This provides a means of measuring the ionization energy of the electrons. By conservation of energy, the energy of the light is equal to the ionization energy
IE
KE
h = IE + KE
Thus, if we use a known frequency
and measure
KE,
we can determine
IE.
electron is to the atom, the higher the ionization energy and the smaller the kinetic energy of the ionized electron. If an atom has more than one electron and these electrons have dierent energies, then for a given frequency of light, we can expect electrons to be ejected with dierent kinetic energies. The higher kinetic energies correspond to the weakly bound outer electrons, and the lower kinetic energies correspond to the tightly bound inner electrons. The ionization energies for the rst twenty elements are given in Table 5.1. single ionization energy for hydrogen and helium. electrons correspond to the We note that there is a The energies of these This is consistent with the shell model of these atoms
since, in both of these atoms, the electron or electrons are in the innermost shell.
n=1
energy level of the hydrogen atom. In lithium and beryllium, there are
two ionization energies. Again, this is consistent with the shell model, since now there are electrons in both of the rst two shells. Note also that the ionization energy of the inner shell electrons increases as we go from hydrogen to lithium to beryllium, because of the increase in nuclear charge. The lower energy electrons correspond to the energy level.
n=1
energy level of hydrogen and the higher energy electrons correspond to the
n=2
33
N O F Ne Na Mg Al Si P S Cl Ar K Ca
39.6 52.6 67.2 84.0 104 126 151 178 208 239 273 309 347 390
2.45 3.12 3.88 4.68 6.84 9.07 12.1 15.1 18.7 22.7 26.8 31.5 37.1 42.7
1.40 1.31 1.68 2.08 3.67 5.31 7.79 10.3 13.5 16.5 20.2 24.1 29.1 34.0 0.50 0.74 1.09 1.46 1.95 2.05 2.44 2.82 3.93 4.65 0.58 0.79 1.01 1.00 1.25 1.52 2.38 2.9 0.42 0.59
Table 5.1
Surprisingly, though, boron has three ionization energies, which does not seem consistent with the shell model. From the hydrogen atom energy levels, we would have expected that all
n=2
the same energy. We can note that the two smaller ionization energies in boron are comparable in magnitude and smaller by more than a factor of ten than the ionization energy of the electrons in the inner shell. Thus, the electrons in the outer
n=2
shell apparently have comparable energies, but they are not identical. The
separation of the second shell into two groups of electrons with two comparable but dierent energies is apparent for elements boron to neon. As such, we conclude from the experimental data that the second shell of electrons should be described as two
as the "2s" and "2p" subshells, with 2s electrons slightly lower in energy than 2p electrons. The energies of the 2s and 2p electrons decrease from boron to neon, consistent with the increase in the nuclear charge. Beginning with sodium, we observe four distinct ionization energies, and beginning with aluminum there are ve. Note for these elements that the fourth and fth ionization energies are again roughly a factor of ten smaller than the second and third ionization energies, which are in turn at least a factor of ten less than the rst ionization energy. Thus, it appears that there are three shells of electrons for these atoms, consistent with our previous shell model. As with the 3s and 3p subshells. These data also reveal how many electrons can reside in each subshell. In each n level, there are two elements which have only the ionization energy for the s subshell. Hence, s subshells can hold two electrons. By contrast, there are 6 elements which have both the s and p subshell ionization energies, so the p subshell can hold 6 electrons. The shell and subshell organization of electron energies can also be observed by measuring the "electron anity" of the atoms. Electron anity is the energy released when an electron is added to an atom:
n = 2,
the
n=3
(5.7)
If there is a strong attraction between the atom A and the added electron, then a large amount of energy is released during this reaction, and the electron anity is a large positive number. (As a note, this convention is the opposite of the one usually applied for energy changes in reactions: exothermic reactions, which give o energy, conventionally have negative energy changes.)
34
328.0 kJ/mol, 348.8 kJ/mol, and 324.6 kJ/mol. Thus, the attached electrons are strongly attracted to the nucleus in each of these atoms. This is because there is room in the current subshell to add an additional electron, since each atom has 5 p electrons, and the core charge felt by the electron in that subshell is large. By contrast, the electron anities of the inert gases are gas atom actually requires the
negative: the addition of an electron to an inert input of energy, in eect, to force the electron into place. This is because the
added electron cannot t in the current subshell and must be added to a new shell, farther from the nucleus. As such, the core charge felt by the added electron is very close to zero. Similarly, the electron anities of the elements Be, Mg, and Ca are all negative. This is again because the s subshell in these atoms already has two electrons, so the added electron must go into a higher energy subshell with a much smaller core charge.
uncertainty principle.
A characteristic
of wave motion is that, unlike a particle, the wave does not have a denite position at a single point in space. By contrast, the location of a particle is precise. Therefore, since an electron travels as a wave, we must conclude that we cannot determine the precise location of the electron in an atom. This is, for our purposes, the uncertainty principle of quantum mechanics. We determine the precise location. where the electron is observed. This probability distribution is determined by quantum mechanics. hydrogen atom is described by a function, often called the typically designated by the symbol mechanics tells us that
but we nd that each measurement results in a dierent value. We are then forced to accept that we cannot We are allowed, however, to determine a
wave function
electron orbital
r, r.
and
(||)
is the
and quantum
Each electron orbital has an associated constant value of the electronic energy,
earlier conclusions. In fact, quantum mechanics exactly predicts the energy shells and the hydrogen atom spectrum we observe. The energy of an electron in an orbital is determined primarily by two characteristics of the orbital. The rst, rather intuitive, property determines the average potential energy of the electron: an orbital which has substantial probability in regions of low potential energy will have a low total energy. By Coulomb's law, the potential energy arising from nucleus-electron attraction is lower when the electron is nearer the nucleus. In atoms with more than one electron, electron-electron repulsion also contributes to the potential energy, as Coulomb's law predicts an increase in potential energy arising from the repulsion of like charges. A second orbital characteristic determines the contribution of kinetic energy, via a more subtle eect arising out of quantum mechanics. kinetic energy. As a consequence of the uncertainty principle, quantum mechanics predicts that, the more conned an electron is to a smaller region of space, the higher must be its average Since we cannot measure the position of electron precisely, we dene the uncertainty in the measurement as
(x).
(p)
in the momentum.
35
(x) (p)
where
h 4
(5.8)
is Planck's constant,
of a photon). This inequality reveals that, when an electron moves in a small area with a correspondingly small uncertainty
(x),
(p)
(p)
to be large, the
momentum must also be large, and so must be the kinetic energy. Therefore, the more compact an orbital is, the higher will be the average kinetic energy of an electron in that orbital. This extra kinetic energy, which can be regarded as the
magnitude to the average potential energy of electron-nuclear attraction. Therefore, in general, an electron orbital provides a compromise, somewhat localizing the electron in regions of low potential energy but somewhat delocalizing it to lower its connement energy.
single electron.
energy and its attraction to the nucleus. The situation is dierent in all atoms containing more than one electron, because the energy of the electrons is aected by their mutual repulsion. This repulsion is very dicult to quantify, but our model must take it into account. A simple way to deal with the eect of electron-electron repulsion is to examine the shell structure of the atom. The two
n=1
n=2
n=1 n=2
shell. The
n=1
n=2
structure allows us to see in a simple way the eect of electron-electron repulsion on the energies of the electrons. Each
n=2
repelled by the two -1 charges from the inner shell formed by the two
n=1
n=2
electron eectively "sees" roughly a +2 nuclear charge. We refer to this +2 as the "core charge" since it is the net charge on the core resulting from the balance of attraction to the nucleus and repulsion from the core electrons. The nucleus is partially "shielded" from the valence electrons by the core electrons. This shielding eect does not seem to account for the dierence in ionization energies between 2s and 2p or for the lower ionization energy of boron compared to beryllium, since, in each atom, the valence electrons are in the
probabilities
n=2
n=2
shell. However, the shielding eect is not perfect. Recall that we only know the
for observing the positions of the electrons. Therefore, we cannot denitely state that the
n=1
n=2
electron might
n=1
n=2
the core, it is no longer shielded from the nucleus. In this case, the to the nucleus and its energy is thus lowered.
n=2
quantum theory. The answer is in Figure 5.3 (Probability for an Electron at a Distance r from a Hydrogen Nucleus), which shows the probability of nding an electron a distance to penetrate the core than for the 2p electron to do so.
the 1s, 2s, and 2p orbitals. We can see that there is a greater probability (though small) for the 2s electron
36
Figure 5.3
As a result of the core penetration, an electron in a 2s orbital feels a greater "eective nuclear charge" than just the core charge, which was approximated by assuming perfect shielding. Thus the eective nuclear charge for a 2s electron is greater than the eective nuclear charge for a 2p electron. Therefore, the energy of an electron in the 2s orbital in beryllium is lower than it would be in the 2p orbital. A detailed analysis from quantum mechanics gives the following ordering of orbitals in order of increasing energy:
1s < 2s < 2p < 3s < 3p < 4s < 3d < 4p < 5s < ...
(5.9)
This ordering can be rationalized on the basis of eective nuclear charge, shielding, and core penetration.
37
Explain how we can know that higher frequency light contains higher energy photons.
Electron anity is the energy released when an electron is attached to an atom. If an atom has a positive electron anity, the added electron is attracted to the nucleus to form a stable negative ion. Why doesn't a Beryllium atom have a positive electron anity? Explain how this demonstrates that the energy of a 2s orbital is less than the energy of a 2p orbital.
Why does an inert gas atom have a high ionization energy but a low electron anity? Why do these properties combine to make the atoms of inert gases unreactive?
Consider electrons from two dierent subshells in the same atom. In photoelectron spectroscopy, the lower energy electron has a higher ionization energy but is observed to have lower kinetic energy after ionization. Reconcile the lower energy with the higher ionization energy with the lower kinetic energy.
Exercise 5.6
Chlorine atoms have 5 distinct ionization energies. Explain why. Predict the number of ionization energies for Bromine atoms, and explain your answer. (Hint: examine the structure of the periodic table.)
Exercise 5.7
Why does a Bromine atom have a much smaller radius than a Potassium atom, even though a Br atom has 16 more electrons than does a K atom?
Explain why electrons conned to smaller orbitals are expected to have higher kinetic energies.
Dene "shielding" in the context of electron-electron repulsion. What is the signicance of shielding in determining the energy of an electron? How is the aected by core penetration?
38
Chapter 6
Covalent Bonding and Electron Pair Sharing
1
6.1 Foundation
We begin with our understanding of the relationship between chemical behavior and atomic structure. That is, we assume the Periodic Law that the chemical and physical properties of the elements are periodic functions of atomic number. We further assume the structure of the atom as a massive, positively charged nucleus, whose size is much smaller than that of the atom as a whole, surrounded by a vast open space in which move negatively charged electrons. These electrons can be eectively partitioned into a core and a valence shell, and it is only the electrons in the valence shell which are signicant to the chemical properties of the atom. The number of valence electrons in each atom is equal to the group number of that element in the Periodic Table.
6.2 Goals
The atomic molecular theory is extremely useful in explaining what it means to form a compound its component elements. That is, a compound consists of identical molecules, each comprised of the atoms of the component elements in a simple whole number ratio. However, the atomic molecular theory also opens up a wide range of new questions. We would like to know what atomic properties determine the number of atoms of each type which combine to form stable compounds. Why are some combinations observed and other combinations not observed? Some elements with very dissimilar atomic masses (for example, iodine and chlorine) form very similar chemical compounds, but other elements with very similar atomic masses (for example, oxygen and nitrogen) form very dissimilar compounds. What factors are responsible for the bonding properties of the elements in a similar group? In general, we need to know what forces hold atoms together in forming a molecule. We have developed a detail understanding of the structure of the atom. Our task now is to apply this understanding to develop a similar level of detail about how atoms bond together to form molecules.
valence
molecules. The inert gases do not tend to combine with any other atoms. We thus assign their valence as 0, meaning that these atoms tend to form 0 bonds. Each halogen prefers to form molecules by combining with
1 This
40
a valence of 1. What we mean by a valence of 1 is that these atoms prefer to bind to only one other atom. The valence of oxygen, sulfur, etc. is assigned as 2, since two hydrogens are required to satisfy bonding needs of these atoms. Nitrogen, phosphorus, etc. have a valence of 3, and carbon and silicon have a valence of 4. This concept also applies to elements just following the inert gases. Lithium, sodium, potassium, and rubidium bind with a single halogen atom. Therefore, they also have a valence of 1. Correspondingly, it is not surprising to nd that, for example, the combination of two potassium atoms with a single oxygen atom forms a stable molecule, since oxygen's valence of 2 is be satised by the two alkali atoms, each with valence 1. We can proceed in this manner to assign a valence to each element, by simply determining the number of atoms to which this element's atoms prefer to bind. In doing so, we discover that the periodic table is a representation of the valences of the elements: elements in the same group all share a common valence. The inert gases with a valence of 0 sit to one side of the table. Each inert gas is immediately preceded in the table by one of the halogens: uorine precedes neon, chlorine precedes argon, bromine precedes krypton, and iodine precedes xenon. And each halogen has a valence of one. This "one step away, valence of one" pattern can be extended. The elements just prior to the halogens (oxygen, sulfur, selenium, tellurium) are each two steps away from the inert gases in the table, and each of these elements has a valence of two ( (nitrogen, phosphorus, antimony, arsenic) have valences of three (
e.g. H2 O, H2 S ). The elements just preceding these e.g. N H3 , P H3 ), and the elements before
SiH4 ).
The two groups of elements
that (carbon and silicon most notably) have valences of four (CH4 ,
immediately after the inert gases, the alkali metals and the alkaline earths, have valences of one and two, respectively. Hence, for many elements in the periodic table, the valence of its atoms can be predicted from the number of steps the element is away from the nearest inert gas in the table. This systemization is quite remarkable and is very useful for remembering what molecules may be easily formed by a particular element. Next we discover that there is a pattern to the valences: for elements in groups 4 through 8 ( through neon), the valence of each atom always equals
eight.
plus
e.g.
carbon
For examples, carbon has a valence of 4 and has 4 valence electrons, nitrogen has a
valence of 3 and has 5 valence electrons, and oxygen has a valence of 2 and has 6 valence electrons. Hydrogen is an important special case with a single valence electron and a valence of 1. Interestingly, for each of these atoms, the number of bonds the atom forms is equal to the number of vacancies in its valence shell. To account for this pattern, we develop a model assuming that each atom attempts to bond to other atoms so as to completely ll its valence shell with electrons. For elements in groups 4 through 8, this means that each atom attempts to complete an "octet" of valence shell electrons. (Why atoms should behave this way is a question unanswered by this model.) chlorine to form hydrogen chloride, Consider, for example, the combination of hydrogen and
HCl.
The chlorine atom has seven valence electrons and seeks to add a
single electron to complete an octet. Hence, chlorine has a valence of 1. Either hydrogen or chlorine could satisfy its valence by "taking" an electron from the other atom, but this would leave the second atom now needing two electrons to complete its valence shell. The only way for both atoms to complete their valence shells simultaneously is to
share
two electrons. Each atom donates a single electron to the electron pair The two atoms are
which is shared. It is this sharing of electrons that we refer to as a chemical bond, or more specically, as a
covalent bond, so named because the bond acts to satisfy the valence of both atoms.
thus held together by the need to share the electron pair.
i.e.
C2 H6 ,
CH4 , a primary component of household natural gas. Other propane C3 H8 , butane C4 H10 , pentane C5 H12 , hexane C6 H14 ,
C7 H16 ,
and octane
C8 H18 .
formulae: in each case, the number of hydrogen atoms is two more than twice the number of carbon atoms, so that each compound has a molecular formula like
Cn H2n+2 .
in the valences of the atoms involved which should be understandable in terms of our valence shell electron
41
pair sharing model. In each molecule, the carbon atoms must be directly bonded together, since they cannot be joined together with a hydrogen atom. In the easiest example of ethane, the two carbon atoms are bonded together, and each carbon atom is in turn bonded to three hydrogen atoms. Thus, in this case, it is relatively apparent that the valence of each carbon atom is 4, just as in methane, since each is bonded to four other atoms. Therefore, by sharing an electron pair with each of the four atoms to which it is bonded, each carbon atom has a valence shell of eight electrons. In most other cases, it is not so trivial to determine which atoms are bonded to which, as there may be multiple possibilities which satisfy all atomic valences. Nor is it trivial, as the number of atoms and electrons increases, to determine whether each atom has an octet of electrons in its valence shell. We need a system of electron accounting which permits us to see these features more clearly. To this end, we adopt a standard notation for each atom which displays the number of valence electrons in the unbonded atom explicitly. In this notation, carbon and hydrogen look like Figure 6.1, representing the single valence electron in hydrogen and the four valence electrons in carbon.
Figure 6.1
Using this notation, it is now relatively easy to represent the shared electron pairs and the carbon atom valence shell octets in methane and ethane. Linking bonded atoms together and pairing the valence shell electrons from each gives Figure 6.2.
Figure 6.2
Recall that each shared pair of electrons represents a chemical bond. These are examples of what are called
Lewis structures, after G.N. Lewis who rst invented this notation.
i.e.
count the number of valence shell electrons around each atom in the bonded molecule. Consistent with our model of the octet rule, each carbon atom has eight valence electrons and each hydrogen has two in the molecule. In a larger hydrocarbon, the structural formula of the molecule is generally not predictable from the number of carbon atoms and the number of hydrogen atoms, so the molecular structure must be given to deduce the Lewis structure and thus the arrangement of the electrons in the molecule. However, once given
42
this information, it is straightforward to create a Lewis structure for molecules with the general molecular formula
Cn H2n+2
such as propane, butane, etc. For example, the Lewis structure for "normal" butane (with
all carbons linked one after another) is found here (Figure 6.3).
Figure 6.3
It is important to note that there exist no hydrocarbons where the number of hydrogens exceeds two more than twice the number of carbons. For example,
CH5
C2 H8 .
which are consistent with the octet rule will fail for these molecules. Similarly,
CH3
and
C 2 H5
are observed
to be so extremely reactive that it is impossible to prepare stable quantities of either compound. Again we nd that it is not possible to draw Lewis structures for these molecules which obey the octet rule. We conclude from these examples that, when it is possible to draw a Lewis structure in which each carbon has a complete octet of electrons in its valence shell, the corresponding molecule will be stable and the hydrocarbon compound will exist under ordinary conditions. After working a few examples, it is apparent that this always holds for compounds with molecular formula t the form in ethene
Cn H2n+2 . 2n + 2.
In these compounds,
On the other hand, there are many stable hydrocarbon compounds with molecular formulae which do not
Cn H2n+2 ,
the valences of the carbon atoms are not quite so obviously satised by electron pair sharing. For example,
C2 H4
and acetylene
C2 H2
there are not enough hydrogen atoms to permit each carbon atom to
be bonded to four atoms each. In each molecule, the two carbon atoms must be bonded to one another. By simply arranging the electrons so that the carbon atoms share a single pair of electrons, we wind up with rather unsatisfying Lewis structures for ethene and acetylene, shown here (Figure 6.4).
Figure 6.4
Note that, in these structures, neither carbon atom has a complete octet of valence shell electrons. Moreover, these structures indicate that the carbon-carbon bonds in ethane, ethene, and acetylene should
43
be very similar, since in each case a single pair of electrons is shared by the two carbons. However, these bonds are observed to be chemically and physically very dierent. First, we can compare the energy required to break each bond (the is 347 kJ in
We nd that the carbon-carbon bond energy Second, it is possible to observe the distance It is found that carbon-carbon
C2 H6 ,
589 kJ in
C 2 H2 .
between the two carbon atoms, which is referred to as the bond length is 154 pm in be very dierent.
bond length.
C 2 H6 ,
134 pm in
C2 H4 ,
and 120 pm in
These observations reveal clearly that the bonding between the carbon atoms in these three molecules must Note that the bond in ethene is about one and a half times as strong as the bond in ethane; this suggests that the two unpaired and unshared electrons in the ethene structure above are also paired and shared as a second bond between the two carbon atoms. Similarly, since the bond in acetylene is about two and a half times stronger than the bond in ethane, we can imagine that this results from the sharing of three pairs of electrons between the two carbon atoms. These assumptions produce the Lewis structures here (Figure 6.5).
Figure 6.5
These structures appear sensible from two regards. First, the trend in carbon-carbon bond strengths can be understood as arising from the increasing number of shared pairs of electrons. Second, each carbon atom has a complete octet of electrons. We refer to the two pairs of shared electrons in ethene as a and the three shared pairs in acetylene as a
triple bond.
double bond
We thus extend our model of valence shell electron pair sharing to conclude that carbon atoms can bond by sharing one, two, or three pairs of electrons as needed to complete an octet of electrons, and that the strength of the bond is greater when more pairs of electrons are shared. Moreover, the data above tell us that the carbon-carbon bond in acetylene is shorter than that in ethene, which is shorter than that in ethane. We conclude that triple bonds are shorter than double bonds which are shorter than single bonds.
44
Figure 6.6
Note that this structure leaves three of the valence electrons "unpaired" and thus ready to join in a shared electron pair. The remaining two valence electrons are "paired," and this notation implies that they therefore are not generally available for sharing in a covalent bond. available data, This notation is consistent with the
i.e.
ve valence electrons and a valence of 3. Pairing the two non-bonding electrons seems
reasonable in analogy to the fact that electrons are paired in forming covalent bonds. Analogous structures can be drawn for oxygen, as well as for uorine and the other halogens, as shown here (Figure 6.7).
Figure 6.7
With this notation in hand, we can now analyze structures for molecules including nitrogen, oxygen, and the halogens. The hydrides are the easiest, shown here (Figure 6.8).
Figure 6.8
Note that the octet rule is clearly obeyed for oxygen, nitrogen, and the halogens. At this point, it becomes very helpful to adopt one new convention: a pair of bonded electrons will now be more easily represented in our Lewis structures by a straight line, rather than two dots. Double bonds and triple bonds are represented by double and triple straight lines between atoms. We will continue to show non-bonded electron pairs explicitly. As before, when analyzing Lewis structures for larger molecules, we must already know which atoms are bonded to which. For example, two very dierent compounds, ethanol and dimethyl ether, both have
45
molecular formula
C 2 H6 O .
In ethanol, the two carbon atoms are bonded together and the oxygen atom is
attached to one of the two carbons; the hydrogens are arranged to complete the valences of the carbons and the oxygen shown here (Figure 6.9).
Figure 6.9
This Lewis structure reveals not only that each carbon and oxygen atom has a completed octet of valence shell electrons but also that, in the stable molecule, there are four non-bonded electrons on the oxygen atom. Ethanol is an example of an
alcohol.
group. The Lewis structures of all alcohols obey the octet rule. In dimethyl ether, the two carbons are each bonded to the oxygen, in the middle, shown here (Figure 6.10).
Figure 6.10
and dimethyl ether, the octet rule is obeyed for all carbon and oxygen atoms. Therefore, it is not usually possible to predict the structural formula of a molecule from Lewis structures. We must know the molecular
isomers,
46
Figure 6.11
"Halogenated" hydrocarbons have been used extensively as refrigerants in air conditioning systems and refrigerators. These are the notorious "chlorouorocarbons" or "CFCs" which have been implicated in the destruction of stratospheric ozone. Two of the more important CFCs include Freon 11, 114,
CF Cl3 ,
and Freon
C2 F4 Cl2 ,
for which we can easily construct appropriate Lewis structures, shown here (Figure 6.12).
Figure 6.12
Finally, Lewis structures account for the stability of the diatomic form of the elemental halogens,
F2 ,
Cl2 , Br2 ,
and
I2 .
F2
Figure 6.13
47
We can conclude from these examples that molecules containing oxygen, nitrogen, and the halogens are expected to be stable when these atoms all have octets of electrons in their valence shells. The Lewis structure of each molecule reveals this character explicitly. On the other hand, there are many examples of common molecules with apparently unusual valences, including: carbon dioxide bonded to one; formaldehyde
CO2 , in which the carbon is bonded to H2 CO; and hydrogen cyanide HCN .
only two atoms and each oxygen is only Perhaps most conspicuously, we have yet
to understand the bonding in two very important elemental diatomic molecules, has fewer atoms than the valence of either atom. We rst analyze
O2
and
N2 ,
each of which
CO2 ,
CO
which is signicantly greater than the bond strength of the results from double bonding in
CO
comparison of bonds strengths in ethane to ethene, we can imagine that this dierence in bond strengths
CO2 .
CO2
are shared (Figure 6.14) does not obey the octet rule, but one in which we pair and share the extra electrons reveals that double bonding permits the octet rule to be obeyed (Figure 6.15).
Figure 6.14
Figure 6.15
A comparison of bond lengths is consistent with our reasoning: the single whereas the double bond in The strength of the here (Figure 6.16).
CO
CO2
is 116.
Knowing that oxygen atoms can double-bond, we can easily account for the structure of formaldehyde.
CO
bond in
H2 CO
is comparable to that in
CO2 ,
48
Figure 6.16
What about nitrogen atoms? We can compare the strength of the appropriate Lewis structure for
CN
bond in
HCN ,
in methyl amine, 290 kJ. This dramatic disparity again suggests the possibility of multiple bonding, and an
HCN
Figure 6.17
We can conclude that oxygen and nitrogen atoms, like carbon atoms, are capable of multiple bonding. Furthermore, our observations of oxygen and nitrogen reinforce our earlier deduction that multiple bonds are stronger than single bonds, and their bond lengths are shorter. As our nal examples in this section, we consider molecules in which oxygen atoms are bonded to oxygen atoms. Oxygen-oxygen bonds appear primarily in two types of molecules. The rst is simply the oxygen diatomic molecule, of the OO bond in here (Figure 6.18).
O2 ,
H2 O2 .
In a
O2 O2
H2 O2
is 142 kJ. This is easily understood in a comparison of the Lewis structures of these
molecules, showing that the peroxide bond is a single bond, whereas the
Figure 6.18
We conclude that an oxygen atom can satisfy its valence of 2 by forming two single bonds or by forming one double bond. In both cases, we can understand the stability of the resulting molecules by in terms of an octet of valence electrons.
49
Figure 6.19
90 . Rather, the structure simply reveals that the carbon atom has a complete octet of valence electrons in a methane molecule, that all bonds are single bonds, and that there are no non-bonding electrons. Similarly, one can write the Lewis structure for a water molecule in two apparently dierent ways, shown here (Figure 6.20).
This does
not imply that methane is a at molecule, or that the angles between CH bonds in methane is
Figure 6.20
identical
because both show that the oxygen atom has a complete octet of valence electrons, forms two single bonds
50
with hydrogen atoms, and has two pairs of unshared electrons in its valence shell. In the same way, the two structures for Freon 114 shown here (Figure 6.21) are also
identical.
Figure 6.21
These two drawings do not represent dierent structures or arrangements of the atoms in the bonds. Finally, we must keep in mind that we have drawn Lewis structures strictly as a convenient tool for our understanding of chemical bonding and molecular stability. It is based on commonly observed trends in valence, bonding, and bond strengths. These structures must not be mistaken as observations themselves, however. As we encounter additional experimental observations, we must be prepared to adapt our Lewis structure model to t these observations, but we must never adapt our observations to t the Lewis model.
SF6 , where
the sulfur atom is bonded to six F atoms. As such, the S atom must have 12 valence shell electrons to form
P Cl5
ClF3
has 10 valence electrons in 3 covalent bonds and two lone pairs. We also observe the
e.g. XeO3 ,
electrons even before forming any bonds. In each of these cases, we note that the valence of the atoms S, P, Cl, and Xe are normally 2, 3, 1, and 0, yet more bonds than this are formed. In such cases, it is not possible to draw Lewis structures in which S, P, Cl, and Xe obey the octet rule. We refer to these molecules as "expanded valence" molecules, meaning that the valence of the central atom has expanded beyond the expected octet. There are also a variety of molecules for which there are too few electrons to provide an octet for every atom. Most notably, Boron and Aluminum, from Group III, display bonding behavior somewhat dierent than we have seen and thus less predictable from the model we have developed so far. These atoms have three valence shell electrons, so we might predict a valence of 5 on the basis of the octet rule. that simple predictions based on the octet rule are not reliable for Group III. Consider rst boron triuoride, with each uorine atom. However, compounds in which boron or aluminum atoms form ve bonds are never observed, so we must conclude
BF3 .
a Lewis structure if we allow each valence shell electron in the boron atom to be shared in a covalent bond
51
Figure 6.22
Note that, in this structure, the boron atom has only six valence shell electrons, but the octet rule is obeyed by the uorine atoms. We might conclude from this one example that boron atoms obey a sextet rule. form a stable ion with hydrogen, However, boron will
BF3
BH4 , in which the boron atom does have a complete octet. In addition, N H3 for form a stable compound, N H3 BF3 , for which a Lewis structure can
be drawn in which boron has a complete octet, shown here (Figure 6.23).
Figure 6.23
Compounds of aluminum follow similar trends. Aluminum trichloride, and aluminum hydroxide,
AlCl3 ,
aluminum hydride,
AlH3 ,
Al(OH)3 ,
the bonded molecule. However, the stability of aluminum hydride ions, support an octet of valence shell electrons as well.
AlH4 ,
We conclude that, although the octet rule can still be of some utility in understanding the chemistry of Boron and Aluminum, the compounds of these elements are less predictable from the octet rule. This should not be disconcerting, however. The octet rule was developed in Section 6.3 (Observation 1: Valence and the Periodic Table) on the basis of the observation that, for elements in Groups IV through VIII, the number of valence electrons plus the most common valence is equal to eight. Elements in Groups I, II, and III do not follow this observation most commonly.
52
HN O3 ,
where all three oxygens are bonded to the nitrogen. Two structures can be drawn for
nitric acid with nitrogen and all three oxygens obeying the octet rule. In each structure, of the oxygens not bonded to hydrogen, one shares a single bond with nitrogen while the other shares a double bond with nitrogen. These two structures are not identical, unlike the two freon structures in Figure 6.12, because the atoms are bonded dierently in the two structures.
53
Cn H2n+2
Using Lewis structures, explain how and in what sense these molecules are "saturated."
Exercise 6.2
extremely reactive. Using Lewis structures, explain the reactivity of these molecules.
State and explain the experimental evidence and reasoning which shows that multiple bonds are stronger and shorter than single bonds.
N2
to
H 4 N2 .
Explain why the two Lewis structures for Freon 114, shown in Figure 21Figure 6.21, are identical. Draw a Lewis structures for an isomer of Freon 114, that is, another molecule with the same molecular formula as Freon 114 but a dierent structural formula.
54
Chapter 7
Molecular Geometry and Electron Domain Theory
1
7.1 Foundation
We begin by assuming a
Lewis structure model for chemical bonding based on valence shell electron pair
sharing and the octet rule. We thus assume the nuclear structure of the atom, and we further assume the existence of a valence shell of electrons in each atom which dominates the chemical behavior of that atom. A covalent chemical bond is formed when the two bonded atoms share a pair of valence shell electrons between them. In general, atoms of Groups IV through VII bond so as to complete an octet of valence shell electrons. A number of atoms, including C, N, O, P, and S, can form double or triple bonds as needed to complete an octet. We know that double bonds are generally stronger and have shorter lengths than single bonds, and triple bonds are stronger and shorter than double bonds.
7.2 Goals
We should expect that the properties of molecules, and correspondingly the substances which they comprise, should depend on the details of the structure and bonding in these molecules. bonding, structure, and properties is comparatively simple in only,
e.g. HCl
or
O2 .
plexities which arise with polyatomic molecules is molecular geometry: how are the atoms in the molecule arranged with respect to one another? In a diatomic molecule, only a single molecular geometry is possible since the two atoms must lie on a line. However, with a triatomic molecule (three atoms), there are two possible geometries: the atoms may lie on a line, producing a linear molecule, or not, producing a bent molecule. In molecules with more than three atoms, there are many more possible geometries. What geometries are actually observed? What determines which geometry will be observed in a particular molecule? We seek a model which allows us to understand the observed geometries of molecules and thus to predict these geometries. Once we have developed an understanding of the relationship between molecular structure and chemical bonding, we can attempt an understanding of the relationship of he structure and bonding in a polyatomic molecule to the physical and chemical properties we observe for those molecules.
1 This
56
The geometry of a molecule includes a description of the arrangements of the atoms in the molecule. At a simple level, the molecular structure tells us which atoms are bonded to which. At a more detailed level, the geometry includes the lengths of all of these bonds, that is, the distances between the atoms which are For example, we nd that in water, two hydrogens are bonded to the oxygen and each O-H bond length is 95.72pm (where
H2 O
is a bent molecule, with the H-O-H angle equal to 104.5 . (The measurement of these
geometric properties is dicult, involving the measurement of the frequencies at which the molecule rotates in the gas phase. In molecules in crystalline form, the geometry of the molecule is revealed by irradiating the crystal with x-rays and analyzing the patterns formed as the x-rays diract o of the crystal.) Not all triatomic molecules are bent, however. As a common example,
CO2
polyatomics can have a variety of shapes, as illustrated in Figure 7.1 (Molecular Structures).
N H3 ,
is a pyramid-shaped molecule, with the hydrogens in an equilateral triangle, the nitrogen above the
plane of this triangle, and a H-N-H angle equal to 107 . The geometry of all H-C-H angles equal to 109.5 . (See also Figure 7.2(a).) Ethane, angle is 109.5 116.6
of methane. The two carbons are bonded together, and each is bonded to three hydrogens. Each H-C-H
and each H-C-C bond angle is 121.7 . All six atoms of ethene lie in the same plane. Thus, ethene
and ethane have very dierent geometries, despite the similarities in their molecular formulae.
57
Molecular Structures
Figure 7.1
We begin our analysis of these geometries by noting that, in the molecules listed above which do
not
58
or very close to the tetrahedral angle 109.5 . To account for the observed angle, we begin with our valence shell electron pair sharing model, and we note that, in the Lewis structures of these molecules, the central atom in each bond angle of these molecules contains four pairs of valence shell electrons. For methane and ethane, these four electron pairs are all shared with adjacent bonded atoms, whereas in ammonia or water, one or two (respectively) of the electron pairs are not shared with any other atom. These unshared electron pairs are called all bond angles are molecules with lone pairs One way to understand this result is based on the mutual repulsion of the negative charges on the valence shell electrons. Although the two electrons in each bonding pair must remain relatively close together in order to form the bond, dierent pairs of electrons should arrange themselves in such a way that the distances between the pairs are as large as possible. Focusing for the moment on methane, the four pairs of electrons must be equivalent to one another, since the four C-H bonds are equivalent, so we can assume that the electron pairs are all the same distance from the central carbon atom. How can we position four electron pairs at a xed distance from the central atom but as far apart from one another as possible? A little reection reveals that this question is equivalent to asking how to place four points on the surface of a sphere spread out from each other as far apart as possible. A bit of experimentation reveals that these four points must sit at the corners of a tetrahedron, an equilateral triangular pyramid, as may be seen in Figure 7.2(b). If the carbon atom is at the center of this tetrahedron and the four electron pairs at placed at the corners, then the hydrogen atoms also form a tetrahedron about the carbon. This is, as illustrated in Figure 7.2(a), the correct geometry of a methane molecule. The angle formed by any two corners of a tetrahedron and the central atom is 109.5 , exactly in agreement with the observed angle in methane. This model also works well in predicting the bond angles in ethane.
lone pairs . Notice that, in the two molecules with no lone pairs, exactly equal to the tetrahedral angle, whereas the bond angles are only close in the
59
(a)
(b)
Figure 7.2:
(a) The dotted lines illustrate that the hydrogens form a tetrahedron about the carbon
atom. (b) The same tetrahedron is formed by placing four points on a sphere as far apart from one another as possible.
valence shell electron pair repulsion (VSEPR) theory . For reasons that will become clear, extension of this model implies that a better name is the Electron Domain (ED) Theory .
shell electron pairs. As such, this model of molecular geometry is often referred to as the This model also accounts, at least approximately, for the bond angles of are clearly not tetrahedral, like
We conclude that molecular geometry is determined by minimizing the mutual repulsion of the valence
H2 O
and
N H3 .
These molecules
CH4 ,
since neither contains the requisite ve atoms to form the tetrahedron.
However, each molecule does contain a central atom surrounded by four pairs of valence shell electrons. We expect from our Electron Domain model that those four pairs should be arrayed in a tetrahedron, without regard to whether they are bonding or lone-pair electrons. Then attaching the hydrogens (two for oxygen,
60
three for nitrogen) produces a prediction of bond angles of 109.5 , very close indeed to the observed angles of 104.5
H2 O
and 107
in
N H3 . H2 O
and
atoms of the molecules do not form tetrahedrons, even if the valence shell electron pairs do.
N H3
noting that these angles are not exactly equal to 109.5 , as in methane. These deviations will be discussed We have developed the Electron Domain model to this point only for geometries of molecules with four pairs of valence shell electrons. However, there are a great variety of molecules in which atoms from Period 3 and beyond can have more than an octet of valence electrons. We consider two such molecules illustrated in Figure 7.3 (More Molecular Structures).
Figure 7.3
61
First,
P Cl5
is a stable gaseous compound in which the ve chlorine atoms are each bonded to the
phosphorous atom. Experiments reveal that the geometry of atoms are on top of and below the P atom.
P Cl5
is that of a
trigonal bipyramid :
three
of the chlorine atoms form an equilateral triangle with the P atom in the center, and the other two chlorine Thus there must be 10 valence shell electrons around the phosphorous atom. Hence, phosphorous exhibits what is called an
Applying
our Electron Domain model, we expect the ve valence shell electron pairs to spread out optimally to minimize their repulsions. The required geometry can again be found by trying to place ve points on the surface of a sphere with maximum distances amongst these points. A little experimentation reveals that this can be achieved by placing the ve points to form a trigonal bipyramid. Hence, Electron Domain theory accounts for the geometry of Second,
P Cl5 .
SF6
is a fairly unreactive gaseous compound in which all six uorine atoms are bonded to Again, it is clear that the octet rule is violated by the sulfur atom, which must
Structures), is highly symmetric: all bond lengths are identical and all bond angles are 90 . The F atoms
center, and the other two F atoms are above and below the S atom. To apply our Electron Domain model to understand this geometry, we must place six points, representing the six electron pairs about the central S atom, on the surface of a sphere with maximum distances between the points. The requisite geometry is found, in fact, to be that of an octahedron, in agreement with the observed geometry. As an example of a molecule with an atom with less than an octet of valence shell electrons, we consider boron trichloride, it is
120 . The three Cl atoms form an equilateral triangle. The Boron atom has only three pairs of valence shell electrons in
trigonal planar , with all four atoms lying in the same plane, and all Cl-B-Cl bond angles equal to
BCl3 .
In applying Electron Domain theory to understand this geometry, we must place three
BCl3 .
The geometry of
BCl3
points on the surface of a sphere with maximum distance between points. We nd that the three points form an equilateral triangle in a plane with the center of the sphere, so Electron Domain is again in accord with the observed geometry. We conclude from these predictions and observations that the Electron Domain model is a reasonably accurate way to understand molecular geometries, even in molecules which violate the octet rule.
the same plane. Each carbon atom in this molecule is surrounded by four pairs of electrons, all of which
i.e.
there are no lone pairs. However, the arrangement of these electron pairs, and
thus the bonded atoms, about each carbon is not even approximately tetrahedral. Rather, the H-C-H and H-C-C bond angles are much closer to 120 , the angle which would be expected if separated in the optimal arrangement, as just discussed for
BCl3 .
This observed geometry can be understood by re-examining the Lewis structure. Recall that, although there are four electron pairs about each carbon atom, two of these pairs form a double bond between the carbon atoms. It is tempting to assume that these four electron pairs are forced apart to form a tetrahedron as in previous molecules. However, if this were this case, the two pairs involved in the double bond would be separated by an angle of 109.5
which would make it impossible for both pairs to be localized between Given this assumption, separating the three
the carbon atoms. To preserve the double bond, we must assume that the two electron pairs in the double bond remain in the same vicinity.
independent domain.
groups of
electron pairs about a carbon atom produces an expectation that all three pairs should lie in the same plane as the carbon atom, separated by 120
angles. This agrees very closely with the observed bond angles. We It is for this
conclude that the our model can be extended to understanding the geometries of molecules with double (or triple) bonds by treating the multiple bond as two electron pairs conned to a single
62
CO2 .
Again,
there are four electron pairs in the valence shell of the carbon atom, but these are grouped into only two domains of two electron pairs each, corresponding to the two C=O double bonds. Minimizing the repulsion between these two domains forces the oxygen atoms to directly opposite sides of the carbon, producing a linear molecule. Similar reasoning using Electron Domain theory as applied to triple bonds correctly predicts that acetylene,
HCCH ,
is a linear molecule. If the electron pairs in the triple bond are treated as a single
domain, then each carbon atom has only two domains each. Forcing these domains to opposite sides from one another accurately predicts 180
CO2 , HCCH )
Electron Domain model, whereas in other molecules, the model predictions are only approximately correct. For examples, the observed angles in ammonia and water each dier slightly from the tetrahedral angle. Here again, there are four pairs of valence shell electrons about the central atoms. As such, it is reasonable to conclude that the bond angles are determined by the mutual repulsion of these electron pairs, and are thus expected to be 109.5 , which is close but not exact. One clue as to a possible reason for the discrepancy is that the bond angles in ammonia and water are both
Another is that both ammonia and water molecules have lone pair electrons, whereas
there are no lone pairs in a methane molecule, for which the Electron Domain prediction is exact. Moreover, the bond angle in water, with two lone pairs, is less than the bond angles in ammonia, with a single lone pair. We can straightforwardly conclude from these observations that the lone pairs of electrons must produce a greater repulsive eect than do the bonded pairs. Thus, in ammonia, the three bonded pairs of electrons are forced together slightly compared to those in methane, due to the greater repulsive eect of the lone pair. Likewise, in water, the two bonded pairs of electrons are even further forced together by the two lone pairs of electrons. This model accounts for the comparative bond angles observed experimentally in these molecules. The valence shell electron pairs repel one another, establishing the geometry in which the energy of their interaction is minimized. Lone pair electrons apparently generate a greater repulsion, thus slightly reducing the angles between the bonded pairs of electrons. Although this model accounts for the observed geometries, why should lone pair electrons generate a greater repulsive eect? We must guess at a qualitative answer to this question, since we have no description at this point for where the valence shell electron pairs actually are or what it means to share an electron pair. We can assume, however, that a pair of electrons shared by two atoms must be located somewhere between the two nuclei, otherwise our concept of "sharing" is quite meaningless. Therefore, the powerful tendency of the two electrons in the pair to repel one another must be signicantly oset by the localization of these electrons between the two nuclei which share them. By contrast, a lone pair of electrons need not be so localized, since there is no second nucleus to draw them into the same vicinity. Thus more free to move about the central atom, these lone pair electrons must have a more signicant repulsive eect on the other pairs of electrons. These ideas can be extended by more closely examining the geometry of ethene, each H-C-H bond angle is 116.6 is slightly less than 120
C2 H4
Recall that
and each H-C-C bond angle is 121.7 , whereas the Electron Domain
theory prediction is for bond angles exactly equal to 120 . We can understand why the H-C-H bond angle
by assuming that the two pairs of electrons in the C=C double bond produce a
greater repulsive eect than do either of the single pairs of electrons in the C-H single bonds. The result of this greater repulsion is a slight "pinching" of the H-C-H bond angle to less than 120 . The concept that lone pair electrons produce a greater repulsive eect than do bonded pairs can be used to understand other interesting molecular geometries. Sulfur tetrauoride, example, shown in Figure 7.4 (Molecular Structure of SF4).
SF4 ,
is a particularly interesting
63
Figure 7.4
Note that two of the uorines form close to a straight line with the central sulfur atom, but the other two are approximately perpendicular to the rst two and at an angle of 101.5 this structure looks something like a seesaw. To account for this structure, we rst prepare a Lewis structure. We nd that each uorine atom is singly bonded to the sulfur atom, and that there is a lone pair of electrons on the sulfur. Thus, with ve electron pairs around the central atom, we expect the electrons to arrange themselves in a trigonal bipyramid, similar to the arrangement in
P Cl5
in Figure 7.3 (More Molecular Structures). In this case, however, the uorine
atoms and the lone pair could be arranged in two dierent ways with two dierent resultant molecular structures. The lone pair can either go on the axis of the trigonal bipyramid ( the equator of the bipyramid (
i.e.
i.e.
The actual molecular structure in Figure 7.4 (Molecular Structure of SF4) shows clearly that the lone pair goes on the equatorial position. This can be understood if we assume that the lone pair produces a greater repulsive eect than do the bonded pairs. With this assumption, we can deduce that the lone pair should be placed in the trigonal bipyramidal arrangement as far as possible from the bonded pairs. 90 90 The equatorial position does a better job of this, since only two bonding pairs of electrons are at approximately
angles from the lone pair in this position. By contrast, a lone pair in the axial position is approximately away from three bonding pairs. Therefore, our Electron Domain model assumptions are consistent with
SF4 .
Note that these assumptions also correctly predict the observed distortions angles which would be predicted by a trigonal bipyramidal arrangement of
and 120
64
65
Explain why arranging points on the surface of a sphere can be considered equivalent to arranging electron pairs about a central atom.
The valence shell electron pairs about the central atom in each of the molecules are arranged approximately in a tetrahedron. However, only
H2 O, N H3 ,
and
CH4
is considered a tetrahedral
Exercise 7.4
Explain how a comparison of the geometries of reason why this might be expected.
H2 O
and
CH4
pair electrons produce a greater repulsive eect than do bonded pairs of electrons. Give a physical
Exercise 7.5
Explain why the octet of electrons about each carbon atom in ethene, even approximately in a tetrahedron.
C2 H4 ,
Exercise 7.6
A trigonal bipyramid forms when there are ve electron domains. If one ED is a lone pair, then the lone pair takes an equatorial position and the molecule has a seesaw geometry. If two EDs are lone pairs, we have to decide among the following options: both axial, both equatorial, or one axial and one equatorial. By placing both lone pairs in the axial positions, the lone pairs are as far apart as possible, so the trigonal planar structure is favored.
Exercise 7.7
Assess the accuracy of the following reasoning and conclusions:
The Cl-X-Cl bond angles in the two molecules (Figure 7.5) are identical, because the bond angle is determined by the repulsion of the two Cl atoms, which is identical in the two molecules.
Figure 7.5
66
Chapter 8
Molecular Structure and Physical Properties
1
8.1 Foundation
We begin with our knowledge of the structure and properties of atoms. We know that atoms have a nuclear structure, meaning that all of the positive charge and virtually all of the mass of the atom are concentrated in a nucleus which is a very small fraction of the volume of the atom. In addition, we know that many of the properties of atoms can be understood by a model in which the electrons in the atom are arranged in shells about the nucleus, with each shell farther from the nucleus that the previous. The electrons in outer shells are more weakly attached to the atom than the electrons in the inner shells, and only a limited number of electrons can t in each shell. Within each shell are subshells, each of which can also hold a limited number of electrons. The electrons in dierent subshells have dierent energies and dierent locations for motion about the nucleus. We also assume a knowledge of the a
Lewis structure
based on valence shell electron pair sharing and the octet rule. A covalent chemical bond is formed when the two bonded atoms share a pair of valence shell electrons between them. In general, atoms of Groups IV through VII bond so as to complete an octet of valence shell electrons. We nally assume the
Electron
are arranged in bonding and non-bonding domains, and these domains are separated in space to minimize electron-electron repulsions. This electron domain arrangement determines the molecular geometry.
8.2 Goals
We should expect that the properties of molecules, and correspondingly the substances which they comprise, should depend on the details of the structure and bonding in these molecules. Now that we have developed an understanding of the relationship between molecular structure and chemical bonding, we analyze physical properties of the molecules and compounds of these molecules to relate to this bonding and structure. Simple examples of physical properties which can be related to molecular properties are the melting and boiling temperatures. These vary dramatically from substance to substance, even for substances which appear similar in molecular formulae, with some melting temperatures in the hundreds or thousands of degrees Celsius and others well below 0 C. We seek to understand these variations by analyzing molecular structures. To develop this understanding, we will have to apply more details of our understanding of atomic structure and electronic congurations. In our covalent bonding model, we have assumed that atoms share electrons to form a bond. However, our knowledge of the properties of atoms reveals that dierent atoms attract
1 This
68
electrons with dierent strengths, resulting in very strong variations in ionization energies, atomic radii, and electron anities. We seek to incorporate this information into our understanding of chemical bonding
e.g.
These compounds are not currently part of our Lewis structure model. For example, Sodium, with a single valence electron, is unlikely to gain seven additional electrons to complete an octet. Indeed, the common valence of the alkali metals in Group I is 1, not 7, and the common valence of the alkaline earth metals is 2, not 6. Thus, our current model of bonding does not apply to elements in these groups. To develop an understanding of bonding in these compounds, we focus on the halides of these elements. In Table 8.1: Melting Points and Boiling Points of Chloride Compounds, we compare physical properties of the chlorides of elements in Groups I and II to the chlorides of the elements of Groups IV, V, and VI, and we see enormous dierences. All of the alkali halides and alkaline earth halides are solids at room temperature and have melting points in the hundreds of degrees centigrade. The melting point of example.
N aCl
is 808 C, for
By contrast, the melting points of the non-metal halides from Periods 2 and 3, such as
CCl4 ,
P Cl3 ,
and
SCl2 ,
are below 0 C, so that these materials are liquids at room temperature. Furthermore, all
Melting Points and Boiling Points of Chloride Compounds Melting Point ( C) Boiling Point ( C)
LiCl BeCl2 CCl4 N Cl3 OCl2 F Cl N aCl M gCl2 SiCl4 P Cl3 SCl2 Cl2 KCl CaCl2
610 405 -23 -40 -20 -154 808 714 -68 -91 -122 -102 772 772
Table 8.1
>1600
Second, the non-metal halide liquids are electrical insulators, that is, they do not conduct an electrical current. By contrast, when we melt an alkali halide or alkaline earth halide, the resulting liquid is an excellent electrical conductor. halides do not. We must conclude that the bonding of atoms in alkali halides and alkaline earth halides diers signicantly from bonding in non-metal halides. We need to extend our valence shell electron model to account for this bonding, and in particular, we must account for the presence of ions in the molten metal halides. Consider This indicates that these molten compounds consist of ions, whereas the non-metal
69
N aCl.
shell electron from a sodium atom. However, such a covalent sharing is clearly inconsistent with the presence of ions in molten sodium chloride. Furthermore, this type of bond would predict that
N aCl N a+
should have
similar properties to other covalent chloride compounds, most of which are liquids at room temperature. By contrast, we might imagine that the chlorine atom completes its octet by taking the valence shell electron from a sodium atom, without covalent sharing. This would account for the presence of in molten sodium chloride. In the absence of a covalent sharing of an electron pair, though, what accounts for the stability of sodium chloride as a compound? It is relatively obvious that a negatively charged chloride ion will be attracted We must also add to this model, however, the fact electrostatically to a positively charged sodium ion. that individual molecules of and
Cl
ions
N aCl
are not generally observed at temperatures less than 1465 C, the boiling
point of sodium chloride. Note that, if solid sodium chloride consists of individual sodium ions in proximity to individual chloride ions, then each positive ion is not simply attracted to a single specic negative ion but rather to all of the negative ions in its near vicinity. as individual Hence, solid sodium chloride cannot be viewed
N aCl
molecules, but must be viewed rather as a lattice of positive sodium ions interacting
with negative chloride ions. This type of ionic bonding, which derives from the electrostatic attraction of interlocking lattices of positive and negative ions, accounts for the very high melting and boiling points of the alkali halides. We can now draw modied Lewis structures to account for ionic bonding, but these are very dierent from our previous drawings. Sodium chloride can be represented as shown in Figure 8.1.
Figure 8.1
This indicates explicitly that the bonding is due to positive-negative ion attraction, and not due to sharing of an electron pair. The only sense in which the
N a+
in having emptied its valence shell of electrons, the remaining outer shell of electrons in the ion has the same octet as does a neon atom. We must keep in mind, however, that the positive sodium ion is attracted to many negative chloride ions, and not just the single chloride ion depicted in the Lewis structure.
Q and a negative charge Q separated by a distance R produce a measurable dipole moment, Q R. An electric eld can interact with an electric dipole and can even orient the dipole in the
70
a chemical bond is electrically neutral, with equal numbers of positive and negative charges. Consequently, a molecule formed from neutral atoms must also be electrically neutral. Although electron pairs are shared between bonded nuclei, this does not aect the total number of negative charges. as a single uncharged particle. This prediction is incorrect, however. To illustrate, a stream of water can be deected by an electrically charged object near the stream, indicating that individual water molecules exhibit a dipole moment. however. A water molecule is rather more complicated than a simple separation of a positive and negative charges, Recall though that a water molecule has equal total numbers of positive and negative charges, consisting of three positively charged nuclei surrounded by ten electrons. Nevertheless, measurements reveal that water has a dipole moment of dipole moments: We might from these simple statements that molecules would be unaected by electric or magnetic elds, each molecule behaving
6.17 1030 (Cm) = 1.85debye. 1debye = 3.33 1030 (Cm).) Water is not unique:
(The debye is a unit used to measure the molecules of most substances have
dipole moments. A sampling of molecules and their dipole moments is given in Table 8.2: Dipole Moments of Specic Molecules.
(debye)
1.85 1.91 1.08 0.80 0.42 0.12 0 1.47 0.58 0.20 0 9.00
Table 8.2
Focusing again on the water molecule, how can we account for the existence of a dipole moment in a neutral molecule? The existence of the dipole moment reveals that a water molecule must have an internal separation of positive partial charge
electrons in the covalent bond between hydrogen and oxygen are not
equally shared.
electrons must spend more time in the vicinity of one nucleus than the other. The molecule thus has one region where, on average, there is a net surplus of negative charge and one region where, on average, there is a compensating surplus of positive charge, thus producing a molecular dipole. Additional observations reveal that the oxygen "end" of the molecule holds the partial negative charge. Hence, the covalently shared electrons spend more time near the oxygen atom than near the hydrogen atoms. We conclude that oxygen atoms have a greater ability to attract the shared electrons in the bond than do hydrogen atoms. We should not be surprised by the fact that individual atoms of dierent elements have diering abilities to attract electrons to themselves. We have previously seen that dierent atoms have greatly varying ionization energies, representing great variation in the extent to which atoms cling to their electrons. We have also seen
71
great variation in the electron anities of atoms, representing variation in the extent to which atoms attract an added electron. We now dene the electrons in a chemical bond.
electronegativity of an atom as the ability of the atom to attract in a chemical bond, whereas ionization energy and electron
anity refer to removal and attachment of electrons in free atoms. However, we can expect electronegativity to be correlated with electron anity and ionization energy. In particular, the electronegativity of an atom arises from a combination of properties of the atom, including the size of the atom, the charge on the nucleus, the number of electrons about the nuclei, and the number of electrons in the valence shell. Because electronegativity is an abstractly dened property, it cannot be directly measured. In fact, there are many denitions of electronegativity, resulting in many dierent scales of electronegativities. However, relative electronegativities can be observed indirectly by measuring molecular dipole moments: in general, the greater the dipole moment, the greater the separation of charges must be, and therefore, the less equal the sharing of the bonding electrons must be. With this in mind, we refer back to the dipoles given in Table 8.2: Dipole Moments of Specic Molecules. There are several important trends in these data. Note that each hydrogen halide (HF ,
HCl, HBr,
HI )
has a signicant dipole moment. Moreover, the dipole moments increase as we move
up the periodic
and
table in the halogen group. We can conclude that uorine atoms have a greater electronegativity than do chlorine atoms, than that of
etc.
HF
H2 O,
N H3 .
from left to right in a single period. These trends hold generally in comparisons of the electronegativities of the individual elements. One set of relative electronegativities of atoms in the rst three rows of the periodic table is given in Table 8.3: Electronegativities of Selected Atoms.
72
H He Li Be B C N O F Ne Na Mg Al Si P S Cl Ar K Ca 2.1 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.9 1.2 1.5 1.8 2.1 2.5 3.0 0.8 1.0
Table 8.3
i.e.
one with more than two atoms. For example, carbon Dipole Moments of Specic Molecules.
is more electronegative than hydrogen. However, the simplest molecule formed from carbon and hydrogen
e.g. CH4 ) does not possess a dipole moment, as we see in Table 8.2:
Similarly, oxygen is signicantly more electronegative than carbon, yet molecular geometry. Note that each
CO2
is a non-polar molecule. An
analysis of molecular dipole moments in polyatomic molecules requires us to apply our understanding of
CO
bond is expected to be polar, due to the unequal sharing of the electron pairs between Thus, the carbon atom should have a slight positive charge and the oxygen
CO
bond. However, since each oxygen atom should have the same net
negative charge, neither end of the molecule would display a greater anity for an electric eld. Moreover, to the other
CO2 is linear, the dipole in one CO bond is exactly oset by the dipole in the opposite direction due CO bond. As measured by an electric eld from a distance, the CO2 molecule does not appear
Available for free at Connexions <http://cnx.org/content/col10264/1.5>
to have separated positive and negative charges and therefore does not display polarity. Thus, in predicting
73
molecular dipoles we must take into account both dierences in electronegativity, which aect bond polarity, and overall molecular geometry, which can produce cancellation of bond polarities. Using this same argument, we can rationalize the zero molecular dipole moments observed for other molecules, such as methane, ethene and acetylene. In each of these molecules, the individual none of these molecules have a molecular dipole moment. As an example of how a molecular property like the dipole moment can aect the macroscopic property of a substance, we can examine the boiling points of various compounds. The boiling point of a compound is determined by the strength of the forces between molecules of the compound: the stronger the force, the more energy is required to separate the molecules, the higher the temperature required to provide this energy. Therefore, molecules with strong intermolecular forces have high boiling points. We begin by comparing molecules which are similar in size, such as the hydrides
CH
bonds are
polar. However, the symmetry of the molecule produces a cancellation of these bond dipoles overall, and
These
the third period. The boiling points at standard pressure for these molecules are, respectively, -111.8 C, -87.7 C, and -60.7 C. All three compounds are thus gases at room temperature and well below. molecules have very similar masses and have exactly the same number of electrons. moments of these molecules are very dierent. The dipole moment of
SiH4 ,
P H3
SH2
is 0.97D. Note that, for these similar molecules, the higher Thus, molecules with larger dipole moments generally
have stronger intermolecular forces than similar molecules with smaller dipole moments. This is because the positive end of the dipole in one molecule can interact electrostatically with the negative end of the dipole in another molecules, and vice versa. We note, however, that one cannot generally predict from dipole moment information only the relative boiling points of compounds of very dissimilar molecules
74
KCl
and
CCl4 ,
contrast how the chemical bonding model can be used to account for these properties.
Exercise 8.2 Exercise 8.3 Exercise 8.4 Exercise 8.5 Exercise 8.6 Exercise 8.7 Exercise 8.8
ionic. Explain why
N aCl
extremely large?
CO
CO2
does not.
Explain why an atom with a high ionization energy is expected to have a high electronegativity. Explain why an atom with a high electron anity is expected to have a high electronegativity.
Would you predict that a Kr atom has high electronegativity or low electronegativity? Predict the relative electronegativity of Kr and F.
Explain why S has a greater electronegativity than P but a smaller electronegativity than O.
N atoms have a high electronegativity. However, N atoms have no electron anity, meaning that N atoms do not attract electrons. Explain how and why these facts are not inconsistent.
Explain why compounds formed from elements with large dierences in electronegativities are
Exercise 8.9
Explain why ionic compounds have much higher melting points than covalent compounds.
Chapter 9
Chemical Bonding and Molecular Energy Levels
1
9.1 Foundation
Our basis for understanding chemical bonding and the structures of molecules is the electron orbital description of the structure and valence of atoms, as provided by quantum mechanics. We assume an understanding of the periodicity of the elements based on the nuclear structure of the atom and our deductions concerning valence based on electron orbitals.
9.2 Goals
Our model of valence describes a chemical bond as resulting from the sharing of a pair of electrons in the valence shell of the bonded atoms. This sharing allows each atom to complete an octet of electrons in its valence shell, at least in the sense that we count the shared electrons as belonging to both atoms. However, it is not clear that this electron counting picture has any basis in physical reality. together? Indeed, what does it mean to say that two atoms are bound together? What is meant, more Furthermore, what is precisely, by the sharing of the electron pair in a bond, and why does this result in the bonding of two atoms the signicance of sharing a pair of electrons? Why aren't chemical bonds formed by sharing one or three electrons, for example? We seek to understand how the details of chemical bonding are related to the properties of the molecules formed, particularly in terms of the strengths of the bonds formed.
+ H2
+ H2
molecular
ion therefore has a single electron. It seems inconsistent with our notions of valence that a single electron, rather than an electron pair, can generate a chemical bond. However, these concepts have been based on observations on molecules, not molecular ions like molecular ion.
+ H2 .
+ H2
is a stable bound
1 This
76
+ H2
in mind that the two nuclei must repel one another, since they are both positively charged. In the absence of the electron, the two nuclei would accelerate away from one another, rather than remaining in close proximity. What is the role of the electron? Clearly, the electron is attracted to both nuclei at the same time, and, in turn, each nucleus is attracted to the electron. The eect of this is illustrated in Fig. 1. In Fig. 1a, the electron is outside of the two nuclei. In this position, the electron is primarily attracted to the nucleus on the left, to which it is closer. More importantly, the nucleus on the right feels a greater repulsion from the other nucleus than attraction to the electron, which is farther away. As a result, the nucleus on the right experiences a strong force driving it away from the hydrogen atom on the left. This arrangement does not generate chemical bonding, therefore. By contrast, in Fig. 1b, the electron is between the two nuclei. In this position, the electron is roughly equally attracted to the two nuclei, and very importantly, each nucleus feels an attractive force to the electron which is greater than the repulsive force generated by the other nucleus. Focusing on the electron's energy, the proximity of the two nuclei provides it a doubly attractive environment with a very low potential energy. If we tried to pull one of the nuclei away, this would raise the potential energy of the electron, since it would lose attraction to that nucleus. Hence, to pull one nucleus away requires us to add energy to the molecular ion. This is what is meant by a chemical bond: the energy of the electrons is lower when the atoms are in close proximity than when the atoms are far part. This holds the nuclei close together, since we must do work (add energy) to take the nuclei apart.
77
Figure 9.1
On
rst thought, this appears to answer our question of what we mean by sharing an electron pair to form a chemical bond. An electron positioned between two nuclei is shared to the extent that its potential energy is lowered due to attraction to both nuclei simultaneously.
78
Levels in Atoms that an electron must obey the uncertainty principle and that, as a consequence, the electron does not have a denite position, between the nuclei or otherwise. We can only hope to specify a probability for observing an electron in a particular location. This probability is, from quantum mechanics, provided by the wave function. What does this probability distribution look like for the orbital in a hydrogen atom.
+ H2
molecular ion?
To answer this question, we begin by experimenting with a distribution that we know: the 1s electron This we recall has the symmetry of a sphere, with equal probability in all To create an directions away from the nucleus.
+ H2
molecular ion from a hydrogen atom, we must add approaches the neutral atom, both the hydrogen
ion).
H + ion
atom's nucleus and electron respond to the electric potential generated by the positive charge. The electron is attracted and the hydrogen atom nucleus is repelled. As a result, the distribution of probability for the electron about the nucleus must become distorted, so that the electron has a greater probability of being near the
H+
ion and the nucleus has a greater probability of being farther from the ion. This distortion,
illustrated in Fig. 2b, is called polarization: the hydrogen atom has become like a dipole, with greater negative charge to one side and greater positive charge to the other.
79
80
H+
electron orbital must be suciently distorted that there is equal probability for observing the electron in proximity to either hydrogen nucleus (see Fig. 2c). The electron probability distribution in Fig. 2c now describes the motion of the electron, not in a hydrogen atom, but in an to this distribution as a molecular orbital. We note that the molecular orbital in Fig. 2c is more delocalized than the atomic orbital in Fig. 2a, and this is also important in producing the chemical bond. We recall from the discussion of Atomic Energy Levels that the energy of an electron in an orbital is determined, in part, by the compactness of the orbital. The more the orbital connes the motion of the electron, the higher is the kinetic energy of the electron, an eect we referred to as the connement energy. Applying this concept to the orbitals in Fig. 2, we can conclude that the connement energy is lowered when the electron is delocalized over two nuclei in a molecular orbital. This eect contributes signicantly to the lowering of the energy of an electron resulting from sharing by two nuclei. Recall that the electron orbitals in the hydrogen atom are described by a set of quantum numbers. One of these quantum numbers is related to the symmetry or shape of the atomic orbital and is generally depicted by a letter. Recall that an s orbital is spherical in shape, and a p orbital has two lobes aligned along one axis. Similarly, the molecular orbitals for the
+ H2
+ H2
give the symmetry (or shape) of the orbital. For our purposes, we need only one of these descriptors, based on the symmetry of the orbital along the bond: if the molecular orbital has the symmetry of a cylinder, we refer to it as a
We conclude that chemical bonding results from an electron in a molecular orbital which has substantial probability for the electron to be between two nuclei. However, this example illustrates chemical bonding with a single electron. Our rules of valence indicate that bonding typically occurs with a pair of electrons, rather than a single electron. Furthermore, this model of bonding does not tell us how to handle molecules with many electrons (say,
F2 )
H2 .
The most direct experimental observation of a chemical bond is the amount of energy required to break it. This is called the bond energy, or somewhat less precisely, the bond strength. Experimentally, it is observed that the bond energy of the hydrogen molecule
+ H2 + molecular ion is 269 kJ/mol. Therefore, the bond in H2 is stronger than the bond in H2 . Thus, the pair of + shared electrons in H2 generates a stronger attractive force than does the single electron in H2 .
H2
Before deducing an explanation of this in terms of electron orbitals, we rst recall the valence shell electron pair description of the bonding in
H2 .
two electrons, each hydrogen atom can ll its valence shell, attaining the electron conguration of helium. How does this translate into the electron orbital picture of electron sharing that we have just described for the
+ H2
molecular ion? There are two ways to deduce the answer to this question, and, since they are both
useful, we will work through them both. The rst way is to imagine that we form an with an
H2
molecule by starting
+ H2
molecular ion and adding an electron to it. As a simple approximation, we might imagine that
the rst electron's probability distribution (its orbital) is not aected by the addition of the second electron. The second electron must have a probability distribution describing its location in the molecule as well. We recall that, in atoms, it is possible to put two electrons into a single electron orbital, provided that the two electrons have opposite values of the spin quantum number, ms. Therefore, we expect this to be true for molecules as well, and we place the added second electron in
H2
results in two electrons in the region between the two nuclei, thus adding to the force of attraction of the two nuclei into the bond. This explains our observation that the bond energy of quite) twice the bond energy of
H2
+ H2 .
H2
81
by starting with two separated hydrogen atoms. Each of these atoms has a single electron in a 1s orbital. As the two atoms approach one another, each electron orbital is polarized in the direction of the other atom. Once the atoms are close enough together, these two orbitals become superimposed. Now we must recall that these orbitals describe the wave-like motion of the electron, so that, when these two wave functions overlap, they must interfere, either constructively or destructively. In Fig. 3, we see the consequences of constructive and destructive interference. We can deduce that, in nuclei, resulting in bonding as before. Therefore, the
H2
must constructively interfere, because that would increase the electron probability in the region between the
H2
can be understood as resulting from the constructive overlap of two atomic 1s electron orbitals. We now add to our observations of diatomic molecules by noting that, of the diatomic molecules formed from like atoms of the rst ten elements, bonds, whereas are not.
H2 , Li2 , B2 , C2 , N2 , O2 , and F2
He2 , Be2 ,
and
N e2
of these elements, we discover a correspondence with which diatomic molecules are bound and which ones
H, Li, B, N, andF
all have odd numbers of electrons, so that at least one electron in each atom is
unpaired. By contrast, He, Be, and Ne all have even numbers of electrons, none of which are unpaired. The other atoms, C and O both have an even number of electrons. However, as deduced in our understanding of the electron congurations in atoms, electrons will, when possible, distribute themselves into dierent orbitals of the same energy so as to reduce the eect of their mutual repulsion. Thus, in C and O, there are three 2p orbitals into which 2 and 4 electrons are placed, respectively. Therefore, in both atoms, there are two unpaired electrons. We conclude that bonds will form between atoms if and only if there are unpaired electrons in these atoms. In
H2 ,
the unpaired electrons from the separated atoms become paired in a molecular orbital formed In all other atoms, there certainly are paired electrons, For example, in a lithium atom, there are
from the overlap of the 1s atomic electron orbitals. In the case of a hydrogen atom, then, there are of course no paired electrons in the atom to worry about. regardless of whether there are or are not unpaired electrons.
two paired electrons in a 1s orbital and an unpaired electron in the 2s orbital. To form
Li2 ,
the unpaired
electron from each atom can be placed into a molecular orbital formed from the overlap of the 2s atomic electron orbitals. However, what becomes of the two electrons paired in the 1s orbital in a Li atom during the bonding of
Li2 ? He2 ,
in which each atom begins with only the two 1s electrons.
As we bring the two He atoms together from a large distance, these 1s orbitals should become polarized, as in the hydrogen atom. When the polarized 1s orbitals overlap, constructive interference will again result in a
problem which prevents bonding for electrons in He2 can be placed into
H2 . Yet, we observe that He2 is not a stable bound molecule. The He2 arises from the Pauli Exclusion Principle: only two of the four this bonding molecular orbital. The other two must go into a dierent
orbital with a dierent probability distribution. To deduce the form of this new orbital, we recall that the bonding orbital discussed so far arises from the constructive interference of the atomic orbitals, as shown in Fig. 3. We could, instead, have assumed destructive interference of these orbitals. Destructive interference of two waves eliminates amplitude in the region of overlap of the waves, also shown in Fig. 3. In the case of the atomic orbitals, this means that the molecular orbital formed from destructive interference decreases probability for the electron to be between in the nuclei. Therefore, it increases probability for the electron to be outside the nuclei, as in Fig. 1a. As discussed there, this arrangement for the electron does not result in bonding; instead, the nuclei repel each other and the atoms are forced apart. This orbital is thus called an anti-bonding orbital. This orbital also has the symmetry of a cylinder along the bond axis, so it is also a
orbital;
82
Figure 9.3
In
He2 ,
both the bonding and the anti-bonding orbitals must be used in order to accommodate four
electrons. The two electrons in the bonding orbital lower the energy of the molecule, but the two electrons in the anti-bonding orbital raise it. Since two He atoms will not bind together, then the net eect must be that the anti-bonding orbital more than osets the bonding orbital. We have now deduced an explanation for why the paired electrons in an atom do not contribute to bonding. Both bonding and anti-bonding orbitals are always formed when two atomic orbitals overlap.
83
When the electrons are already paired in the atomic orbitals, then there are too many electrons for the bonding molecular orbital. Returning to the The extra electrons must go into the anti-bonding orbital, which raises the The energy of the molecule, preventing the bond from forming.
Li2
two 1s electrons from each atom do not participate in the bonding, since the anti-bonding more than osets the bonding. Thus, the paired core electrons remain in their atomic orbitals, unshared, and we can ignore them in describing the bond. The bond is formed due to overlap of the 2s orbitals and sharing of these electrons only. This is also consistent with our earlier view that the core electrons are closer to the nucleus, and thus unlikely to be shared by two atoms. The model we have constructed seems to describe fairly well the bonding in the bound diatomic molecules listed above. For example, in a uorine atom, the only unpaired electron is in a 2p orbital. Recall that a 2p orbital has two lobes, directed along one axis. If these lobes are assumed to lie along the axis between the two nuclei in
F2 ,
then we can overlap them to form a bonding orbital. Placing the two unpaired electrons
into this orbital then results in a single shared pair of electrons and a stable molecular bond.
H2
to the ionization energy of a hydrogen atom, which is 1312 kJ/mol. Therefore, it requires more energy to remove an electron from the hydrogen molecule than from the hydrogen atom, so we can conclude that the electron has a lower energy in the molecule. If we attempt to pull the atoms apart, we must raise the energy of the electron. Hence, energy is required to break the bond, so the molecule is bound. We conclude that a bond is formed when the energy of the electrons in the molecule is lower than the energy of the electrons in the separated atoms. This conclusion seems consistent with our previous view of shared electrons in bonding molecular orbitals. As a second example, we consider the nitrogen molecule,
N2 .
molecular nitrogen is 1503 kJ/mol, and that of atomic nitrogen is 1402 kJ/mol. Once again, we conclude that the energy of the electrons in molecular nitrogen is lower than that of the electrons in the separated atoms, so the molecule is bound. As a third example, we consider uorine,
F2 .
uorine is 1515 kJ/mol, which is smaller than the ionization energy of a uorine atom, 1681 kJ/mol. This seems inconsistent with the bonding orbital concept we have developed above, which states that the electrons in the bond have a lower energy than in the separated atoms. energy in If the electron being ionized has a higher
F2
than in F, why is
F2
the molecular orbital concept of chemical bonding. To proceed further, we compare bond energies in several molecules. Recall that the bond energy (or bond strength) is the energy required to separate the bonded atoms. We observe that the bond energy of kJ/mol. This is very much larger than the bond energy of model and our electron orbital descriptions.
N2
is 956
H2 ,
F2 ,
We can account for the unusually strong bond in nitrogen using both our valence shell electron pair sharing A nitrogen atom has three unpaired electrons in its valence shell, because the three 2p electrons distribute themselves over the three 2p orbitals, each oriented along a dierent axis. Each of these unpaired electrons is available for sharing with a second nitrogen atom. The result, from valence shell electron pair sharing concepts, is that three pairs of electrons are shared between two nitrogen atoms, and we call the bond in bond in
N2
a triple bond.
N2
H2
or in
F2 .
Each of the three 2p atomic orbitals
N2 .
in each nitrogen atom must overlap to form a bonding molecular orbital, if we are to accommodate three electron pairs. Each 2p orbital is oriented along a single axis. One 2p orbital from each atom is oriented in
84
the direction of the other atom, that is, along the bond axis. When these two atomic orbitals overlap, they form a molecular orbital which has the symmetry of a cylinder and which is therefore a they also form a
orbital. Of course,
orbital.
85
86
overlap between these orbitals from dierent atoms must therefore result in a molecular orbital somewhat dierent that what we have discussed before. As shown in Fig. 4, the molecular orbital which results now does not have the symmetry of a cylinder, and in fact, looks something more like a cylinder cut into two pieces. This we call a
to the bond axis. Figure 4 also shows that an anti-bonding orbital is formed from the destructive overlap of 2p orbitals, and this is called a 2p orbitals. In
N2 ,
orbitals. Each
of these orbitals is a bonding orbital, therefore all six electrons have their energy lowered in comparison to the separated atoms. This is depicted in Fig. 5 in what is called a molecular orbital energy diagram. orbitals from each atom form one electrons in the Each pair of atomic orbitals, one from each atom, is overlapped to form a bonding and an anti-bonding orbital. The three 2p
and
and
and
orbitals is apparent. The ten n=2 electrons from the nitrogen atoms are then placed
pairwise, in order of increasing energy, into these molecular orbitals. Note that, in agreement with the Pauli Exclusion Principle, each pair in a single orbital consists of one spin up and one spin down electron.
87
Figure 9.5
Recall now that we began the discussion of bonding in energy of an electron in energy level diagrams
N2 because of the curious result that the ionization F2 is less than that of an electron in an F atom. By comparing the molecular orbital for N2 and F2 we are now prepared to answer this puzzle. There are ve p electrons N2 and F2 .) We place orbitals. Overall,
is a stable molecule,
in each uorine atom. These ten electrons must be distributed over the molecular orbitals whose energies are shown in Fig. 6. (Note that the ordering of the bonding 2p orbitals dier between two electrons in the
there are six electrons in bonding orbitals and four in anti-bonding orbitals. Since
F2
we must conclude that the lowering of energy for the electrons in the bonding orbitals is greater than the raising of energy for the electrons in the antibonding orbitals. Overall, this distribution of electrons is, net,
88
Figure 9.6
F2
the highest energy requires the least energy to remove from the molecule or atom. The molecular orbital energy diagram in Fig. 6 clearly shows that the highest energy electrons in
F2
Therefore, one of these electrons is easier to remove than an electron in an atomic 2p orbital, because the energy of an anti-bonding orbital is higher than that of the atomic orbitals. (Recall that this is why an antibonding orbital is, indeed, anti-bonding.) Therefore, the ionization energy of molecular uorine is less than
89
that of atomic uorine. This clearly demonstrates the physical reality and importance of the anti-bonding orbitals. A particularly interesting case is the oxygen molecule,
O2 .
level diagram for oxygen, we discover that we must decide whether to pair the last two electrons in the same
2p
2p
that oxygen molecules are paramagnetic, meaning that they are strongly attracted to a magnetic eld. To account for this paramagnetism, we recall that electron spin is a magnetic property. In most molecules, all electrons are paired, so for each spin up electron there is a spin down electron and their magnetic elds cancel out. When all electrons are paired, the molecule is diamagnetic meaning that it responds only weakly to a magnetic eld. If the electrons are not paired, they can adopt the same spin in the presence of a magnetic eld. This accounts for the attraction of the paramagnetic molecule to the magnetic eld. Therefore, for a molecule to be paramagnetic, it must have unpaired electrons. The correct molecular orbital energy level diagram for an
O2
90
Figure 9.7
N2 has the strongest bond, followed by O2 F2 . We have previously accounted for this comparison with Lewis structures, showing that N2 is a triple bond, O2 is a double bond, and F2 is a single bond. The molecular orbital energy level diagrams in Figs.
In comparing these three diatomic molecules, we recall that and 5 to 7 cast a new light on this analysis. Note that, in each case, the number of bonding electrons in these molecules is eight. The dierence in bonding is entirely due to the number of antibonding electrons: 2 for
N2
, 4 for
O2
F2 .
bonding and antibonding electrons in the molecule. Therefore, we now dene the bond order as
1 2 (# bonding electrons # antibonding electrons) Note that, dened this way, the bond order for N2 is 3, for O2 is 2, and for
BondOrder
F2
our conclusions from Lewis structures. We conclude that we can predict the relative strengths of bonds by
91
92
+ H2 ion. Explain + why the H2 bond is less than twice as strong as the H2 bond. 3. Be2 is not a stable molecule. What information can we determine from this observation about the
H2
energies of molecular orbitals? 4. Less energy is required to remove an electron from an why, nevertheless, two F atoms. 5. Why do the orbitals of an atom "hybridize" when forming a bond? 6. Calculate the bond orders of the following molecules and predict which molecule in each pair has the stronger bond: a. b. c. d.
F2
an F atom. Therefore, the energy of that electron is higher in the molecule than in the atom. Explain
F2
F2
+ C2 or C2 + B2 or B2 F2 or F2 + O2 or O2
Cl2 ,
NO,
N2
B2
is observed to be paramagnetic.
B2 .
Chapter 10
Energetics of Chemical Reactions
1
10.2 Goals
The heat released or consumed in a chemical reaction is typically amongst the most easily observed and most readily appreciated consequences of the reaction. Many chemical reactions are performed routinely specically for the purpose of utilizing the heat released by the reaction. We are interested here in an understanding of the energetics of chemical reactions. Specically, we wish to know what factors determine whether heat is absorbed or released during a chemical reaction. With that knowledge, we seek to quantify and predict the amount of heat anticipated in a chemical reaction. We expect to nd that the quantity of heat absorbed or released during a reaction is related to the bonding of the molecules involved in the reaction. Prior to answering these questions, we must rst answer a few questions regarding the nature of heat. Despite our common familiarity with heat (particularly in Houston), the concept of heat is somewhat elusive to dene. We recognize heat as "whatever it is that makes things hot," but this denition is too imprecise to permit measurement or any other conceptual progress. Exactly how do we dene and measure heat?
1 This
94
always rises by exactly 13.3 C. Therefore, the same quantity of heat must always be produced by reaction of this quantity of methane. If we burn 1.0g of methane to heat 500g of water instead, we observe a temperature rise of 26.6 C. If we burn 1.0g of methane to heat 1000g of iron, we observe a temperature rise of 123 C. Therefore, the temperature rise observed is a function of the quantity of material heated as well as the nature of the material heated. Consequently, 13.3 C is not an appropriate measure of this quantity of heat, since we cannot say that the burning of 1.0g of methane "produces 13.3 C of heat." Such a statement is clearly revealed to be nonsense, so the concepts of temperature and heat must be kept distinct. Our observations do reveal that we can relate the temperature rise produced in a substance to a xed quantity of heat, provided that we specify the type and amount of the substance. Therefore, we dene a property for each substance, called the of heat absorbed. We dene this heat. The heat
(T )
q = C (T )
This equation, however, is only a denition and does not help us calculate either neither one. Next, however, we observe that we can also elevate the temperature of a substance
(10.1)
or
C,
since we know
mechanically, that
is, by doing work on it. As simple examples, we can warm water by stirring it, or warm metal by rubbing or scraping it. (As an historical note, these observations were crucial in establishing that heat is equivalent to work in its eect on matter, demonstrating that heat is therefore a form of energy.) Although it is dicult to do, we can measure the amount of work required to elevate the temperature of 1g of water by 1 C. We nd that the amount of work required is invariably equal to 4.184J. Consequently, adding 4.184J of energy to 1g of water must elevate the energy of the water molecules by an amount measured by 1 C. By conservation of energy, the energy of the water molecules does not depend on how that energy was acquired. Therefore, the increase in energy measured by a 1 C temperature increase is the same regardless of whether the water was heated or stirred. As such, 4.184J must also be the amount of energy added to the water molecules when they are
required to
The heat capacity per gram of a substance is referred to as the specic heat of the substance, usually indicated by the symbol cs . The specic heat of water is 4.184 JC . capacity of 1g of water must be
elevate the temperature of 1g of water by 1 C. Referring back to (10.1), we now can calculate that the heat
4.184 J . C
Determining the heat capacity (or specic heat) of water is an extremely important measurement for two reasons. First, from the heat capacity of water we can determine the heat capacity of any other substance very simply. Imagine taking a hot 5.0g iron weight at 100 C and placing it in 10.0g of water at 25 C. We know from experience that the iron bar will be cooled and the water will be heated until both have achieved the same temperature. This is an easy experiment to perform, and we nd that the nal temperature of the iron and water is 28.8 C. Clearly, the temperature of the water has been raised by 3.8 C. From (10.1) and the specic heat of water, we can calculate that the water must have absorbed an amount of heat
q = (10.0g)
lost
4.184 g JC
(3.8 C) = 159J .
by the 1g iron weight, whose temperature was lowered by 71.2 C. Again referring to (10.1), we can
J 159J calculate the specic heat of the iron bar to be cs = (71.2 C)(5.0g) = 0.45 g C . Following this procedure, we can easily produce extensive tables of heat capacities for many substances.
Second, and perhaps more importantly for our purposes, we can use the known specic heat of water to measure the heat released in any chemical reaction. To analyze a previous example, we observed that the combustion of 1.0g of methane gas released sucient heat to increase the temperature of 1000g of water by 13.3 C. The heat capacity of 1000g of water must be
(1000g) 4.184 g JC = 4184 J . Therefore, by (10.1), C 13.3 C must require 55, 650J = 55.65kJ of heat. Therefore,
burning 1.0g of methane gas produces exactly 55.65kJ of heat. The method of measuring reaction energies by capturing the heat evolved in a water bath and measuring the temperature rise produced in that water bath is called
calorimetry.
95
equivalence of heat and work as transfers of energy, and on the law of conservation of energy. Following this procedure, we can straightforwardly measure the heat released or absorbed in any easily performed chemical reaction. For reactions which are dicult to initiate or which occur only under restricted conditions or which are exceedingly slow, we will require alternative methods.
(10.2)
By convention, when heat is absorbed during a reaction, we consider the quantity of heat to be a positive
q > 0
for an
endothermic
It is interesting to ask where this input energy goes when the reaction occurs. One way to answer this question is to consider the fact that the reaction (10.2) converts one fuel, with one mole of oxygen gas. We observe that
C (s),
into another,
H2 (g).
To
compare the energy available in each fuel, we can measure the heat evolved in the combustion of each fuel
q = 393.5kJ.
q = 483.6kJ.
is available from combustion of the hydrogen fuel than from combustion of the carbon fuel, so it is not surprising that conversion of the carbon fuel to hydrogen fuel requires the input of energy. Of considerable importance is the observation that the heat input in (10.2), 90.1kJ, is exactly equal to the
dierence between the heat evolved, -393.5kJ, in the combustion of carbon (10.3) and the heat evolved, reverse of the combustion of hydrogen (10.4), we get
C (s) + O2 (g) CO2 (g) 2H2 O (g) 2H2 (g) + O2 (g) C (s) + O2 (g) + 2H2 O (g) CO2 (g) + 2H2 (g) + O2 (g)
This is not a coincidence: if we take the combustion of
-483.6kJ, in the combustion of hydrogen (10.4). carbon (10.3) and add to it the
(10.5)
Canceling the
O2 (g)
from both sides, since it is net neither a reactant nor product, (10.5) is equivalent to
(10.2). Thus, taking the combustion of carbon (10.3) and "subtracting" the combustion of hydrogen (10.4) (or more accurately, adding the reverse of the combustion of hydrogen (10.4)) yields (10.2). And, the heat of the combustion of carbon (10.3) (10.2). By studying many chemical reactions in this way, we discover that this result, known as general.
minus the heat of the combustion of hydrogen (10.4) equals the heat of
Hess' Law, is
Law 10.1:
Hess' Law
The heat of any reaction is equal to the sum of the heats of reaction for any set of reactions which in sum are equivalent to the overall reaction.
96
considered proceed under similar conditions: we will consider all reactions to occur at constant pressure.) A pictorial view of Hess' Law as applied to the heat of (10.2) is illustrative. In Figure 10.1 (A Pictorial View of Hess' Law), the reactants
state
of the materials involved in the reaction prior to the reaction. The products
are placed
together in a second box representing the state of the materials involved after the reaction. The reaction arrow connecting these boxes is labeled with the heat of this reaction. Now we take these same materials and place them in a third box containing
C (s), O2 (g),
and
2H2 (g).
and product boxes with reaction arrows, labeled by the heats of reaction in (10.3) and (10.4).
Figure 10.1
This picture of Hess' Law reveals that the heat of reaction along the "path" directly connecting the reactant state to the product state is exactly equal to the total heat of reaction along the alternative "path" connecting reactants to products via the intermediate state containing
C (s), O2 (g),
and
2H2 (g).
A consequence of our observation of Hess' Law is therefore that the net heat evolved or absorbed during a reaction is independent of the path connecting the reactant to product. (This statement is again subject to our restriction that all reactions in the alternative path must occur under constant pressure conditions.) A slightly dierent view of Figure 10.1 (A Pictorial View of Hess' Law) results from beginning at the reactant box and following a complete circuit through the other boxes leading back to the reactant box, summing the net heats of reaction as we go. We discover that the net heat transferred (again provided that all reactions occur under constant pressure) is exactly zero. This is a statement of the conservation of energy: the energy in the reactant state does not depend upon the processes which produced that state. Therefore, we cannot extract any energy from the reactants by a process which simply recreates the reactants. Were this not the case, we could endlessly produce unlimited quantities of energy by following the circuitous path which continually reproduces the initial reactants. By this reasoning, we can dene an energy function whose value for the reactants is independent of how the reactant state was prepared. function, Likewise, the value of this energy function in the product state is independent of how the products are prepared. We choose this function,
H , which we call the enthalpy, is a state function, since its value depends only on the state of the materials
under consideration, that is, the temperature, pressure and composition of these materials.
H , so that the change in the (H) = Hproducts Hreactants , is equal to the heat of reaction q under constant pressure conditions.
The concept of a state function is somewhat analogous to the idea of elevation. Consider the dierence
97
in elevation between the rst oor and the third oor of a building. This dierence is independent of the path we choose to get from the rst oor to the third oor. We can simply climb up two ights of stairs, or we can climb one ight of stairs, walk the length of the building, then walk a second ight of stairs. Or we can ride the elevator. We could even walk outside and have a crane lift us to the roof of the building, from which we climb down to the third oor. Each path produces exactly the same elevation gain, even though the distance traveled is signicantly dierent from one path to the next. This is simply because the elevation is a "state function." Our elevation, standing on the third oor, is independent of how we got to the third oor, and the same is true of the rst oor. Since the elevation thus a state function, the elevation gain is independent of the path. Now, the existence of an energy state function
P.
(H).
Since
is a state
to
and calculate
(H)
consider one such possible path, consisting of two reactions passing through an intermediate state containing all the atoms involved in the reaction, each in elemental form. This is a useful intermediate state since it can be used for any possible chemical reaction. For example, in Figure 10.1 (A Pictorial View of Hess' Law), the atoms involved in the reaction are C, H, and O, each of which are represented in the intermediate state in elemental form. We can see in Figure 10.2(b) that the between the the
(H)
of the products
(H)
in the formation of
Calculation of H
(a)
(b)
Figure 10.2
The
(H)
as
(H) values for formation of each material from the elements are thus of general utility in calculating standard formation reaction for reactant R,
elements in standard state
R Hf
f,
standard pressure conditions of 1 atm. From Figure 10.2(b), we see that the heat of any reaction can be
98
calculated from
Hf
Extensive tables of
= Hf products Hf reactants
(10.6)
Hf
have been compiled and published. This allows us to calculate with complete
condence the heat of reaction for any reaction of interest, even including hypothetical reactions which may be dicult to perform or impossibly slow to react.
bond energy for a molecule is the energy required to separate the two bonded atoms to great distance.
As such, the energy input required to
We recall that the total energy of the bonding electrons is lower when the two atoms are separated by the bond distance than when they are separated by a great distance. separate the atoms elevates the energy of the electrons when the bond is broken. We can use diatomic bond energies to calculate the heat of reaction
(H)
only diatomic molecules. We consider two simple examples. First, the reaction
(10.7)
kJ is observed to be endothermic with heat of reaction 70 mol . Note that this reaction can be viewed as consisting entirely of the breaking of the H2 bond followed by the formation of the HBr bond. Consequently, we must kJ input energy equal to the bond energy of H2 (436 mol ), but in forming the HBr bond we recover output kJ energy equal to the bond energy of HBr (366 mol ). Therefore the heat of (10.7) at constant pressure must kJ be equal to dierence in these bond energies, 70 mol . Now we can answer the question, at least for this reaction, of where the energy "goes" during the reaction.
The reason this reaction absorbs energy is that the bond which must be broken, bond which is formed,
H2 ,
HBr.
HBr
of energy released is less than the amount of energy required to break the The second example is similar:
H2
(10.8)
kJ This reaction is exothermic with H = 103 mol . In this case, we must break an H2 bond, with energy kJ kJ 436 mol , and a Br2 bond, with energy 193 mol . Since two HBr molecules are formed, we must form two HBr kJ kJ bonds, each with bond energy 366 mol . In total, then, breaking the bonds in the reactants requires 629 mol , kJ kJ and forming the new bonds releases 732 mol , for a net release of 103 mol . This calculation reveals that the
reaction is exothermic because, although we must break one very strong bond and one weaker bond, we form two strong bonds. There are two items worth reection in these examples. First, energy is released in a chemical reaction due to the
input of
energy. Second, (10.8) does not actually proceed by the two-step process of breaking both reactant bonds, thus forming four free atoms, followed by making two new bonds. however, since, as we have shown, the heat of reaction This is another example of the utility of Hess' law. We now proceed to apply this bond energy analysis to the energetics of reactions involving polyatomic molecules. A simple example is the combustion of hydrogen gas discussed previously here (10.4). This is an explosive reaction, producing 483.6kJ per mole of oxygen. Calculating the heat of reaction from bond energies requires us to know the bond energies in The actual process of the reaction is signicantly more complicated. The details of this process are irrelevant to the energetics of the reaction,
(H)
H2 O.
In this case, we must break not one but two bonds: (10.9)
99
The energy required to perform this reaction is measured to be which we rst break two
kJ 926.9 mol .
H2
O2
2H2 (g) + O2 (g) 4H (g) + 2O (g) 4H (g) + 2O (g) 2H2 O (g) 2H2 (g) + O2 (g) 2H2 O (g)
Therefore, the energy of (10.4) must be the energy required to break two twice the energy of (10.9). We calculate that
H2 bonds and one O2 bond minus kJ kJ kJ kJ = 2 436 mol +498.3 mol 2 926.9 mol = 483.5 mol .
Since breaking the
It is clear from this calculation that (10.4) is strongly exothermic because of the very large amount of energy released when two hydrogen atoms and one oxygen atom form a water molecule. It is tempting to use the heat of (10.9) to calculate the energy of an O-H bond. two O-H bonds in water requires
kJ 926.9 mol 2
kJ 926.9 mol ,
kJ = 463.5 mol .
(10.11)
kJ has H = 492 mol . Therefore, the energy required to break an O-H bond in H2 O is not the same as the energy required to break the O-H bond in the OH diatomic molecule. Stated dierently, it requires more
energy to break the rst O-H bond in water than is required to break the second O-H bond. In general, we nd that the energy required to break a bond between any two particular atoms depends upon the molecule those two atoms are in. Considering yet again oxygen and hydrogen, we nd that the energy required to break the O-H bond in methanol (CH3 OH ) is
the energy of (10.11). Similarly, the energy required to break a single C-H bond in methane (CH4 ) is but the energy required to break all four C-H bonds in methane is
kJ 435 mol ,
the energy of one bond. As another such comparison, the energy required to break a C-H bond is
kJ 400 mol in kJ kJ trichloromethane (HCCl3 ), 414 mol in dichloromethane (H2 CCl2 ), and 422 mol in chloromethane (H3 CCl). These observations are somewhat discouraging, since they reveal that, to use bond energies to calculate
the heat of a reaction, we must rst measure the bond energies for all bonds for all molecules involved in that reaction. This is almost certainly more dicult than it is desirable. On the other hand, we can note that the bond energies for similar bonds in similar molecules are close to one another. The C-H bond energies in the three chloromethanes above illustrate this quite well. We can estimate the C-H bond energy in any one of these chloromethanes by the average C-H bond energy in the three chloromethanes molecule, which is
kJ 1663 mol kJ = 416 mol and is thus a 4 reasonable approximation to the energy required to break a single C-H bond in methane.
kJ 412 mol .
By analyzing many bond energies in many molecules, we nd that, in general, we can approximate the bond energy in any particular molecule by the average of the energies of similar bonds. These average bond energies can then be used to estimate the heat of a reaction without measuring all of the required bond energies. Consider for example the combustion of methane to form water and carbon dioxide:
kJ 2 496 mol .
kJ 2 743 mol for the two C=O double kJ bonds and 4 463 = mol for the O-H bonds. Net, the heat of reaction is thus approximately H kJ 1648 + 992 1486 1852 = 698 mol . This is a rather rough approximation to the actual heat of combustion kJ of methane, 890 mol . Therefore, we cannot use average bond energies to predict accurately the heat of a
Forming the bonds in the products releases approximately
kJ 4 412 mol
and two
O2
100
reaction. We can get an estimate, which may be suciently useful. Moreover, we can use these calculations to gain insight into the energetics of the reaction. For example, (10.12) is strongly exothermic, which is From our calculation, we why methane gas (the primary component in natural gas) is an excellent fuel.
can see that the reaction involved breaking six bonds and forming six new bonds. The bonds formed are substantially stronger than those broken, thus accounting for the net release of energy during the reaction.
101
10.6.1
Both samples are heated to the same temperature. Then each sample is placed into separate glasses containing identical quantities of cold water, initially at identical temperatures below that of the metals. The nal temperature of the water containing metal X is greater than the nal temperature of the water containing metal Z. Which of the two metals has the larger heat capacity? Explain your conclusion.
10.6.2
If each sample, initially at the same temperature, is heated with exactly 100J of energy, which sample has the higher nal temperature?
N2 O4 (g) 2N O2 (g)
Draw Lewis structures for each of
N2 O4 and N O2 .
H2
not equal to
Hf
of
H2 ?
H2 ?
Exercise 10.6
Determine whether the reaction is exothermic or endothermic for each of the following circumstances:
10.6.1
The heat of combustion of the products is greater than the heat of combustion of the reactants.
10.6.2
The enthalpy of formation of the products is greater than the enthalpy of formation of the reactants.
102
Chapter 11
The Ideal Gas Law
1
11.1 Foundation
We assume as our starting point the atomic molecular theory. That is, we assume that all matter is composed of discrete particles. The elements consist of identical atoms, and compounds consist of identical molecules, which are particles containing small whole number ratios of atoms. We also assume that we have determined a complete set of relative atomic weights, allowing us to determine the molecular formula for any compound.
11.2 Goals
The individual molecules of dierent compounds have characteristic properties, such as mass, structure, geometry, bond lengths, bond angles, polarity, diamagnetism or paramagnetism. We have not yet considered the properties of mass quantities of matter, such as density, phase (solid, liquid or gas) at room temperature, boiling and melting points, reactivity, and so forth. These are properties which are not exhibited by individual molecules. It makes no sense to ask what the boiling point of one molecule is, nor does an individual molecule exist as a gas, solid, or liquid. However, we do expect that these material or bulk properties are related to the properties of the individual molecules. Our ultimate goal is to relate the properties of the atoms and molecules to the properties of the materials which they comprise. Achieving this goal will require considerable analysis. In this Concept Development Study, we begin at a somewhat more fundamental level, with our goal to know more about the nature of gases, liquids and solids. We need to study the relationships between the physical properties of materials, such as density and temperature. We begin our study by examining these properties in gases.
is dened
P = F
head.
F A A
is the force exerted by the air on the surface of the piston head and
1 This
104
piston inside a cylinder) connected to the pressure gauge, and measure both the volume of air trapped inside the syringe and the pressure reading on the gauge. In one such sample measurement, we might nd that, at atmospheric pressure (760 torr), the volume of gas trapped inside the syringe is 29.0 ml. We then compress the syringe slightly, so that the volume is now 23.0 ml. We feel the increased spring of the air, and this is registered on the gauge as an increase in pressure to 960 torr. It is simple to make many measurements in this manner. A sample set of data appears in Table 11.1: Sample Data from Pressure-Volume Measurement. We note that, in agreement with our experience with gases, the pressure increases as the volume decreases. These data are plotted here (Figure 11.1: Measurements on Spring of the Air).
Figure 11.1
105
An initial question is whether there is a quantitative relationship between the pressure measurements and the volume measurements. To explore this possibility, we try to plot the data in such a way that both quantities increase together. This can be accomplished by plotting the pressure versus the inverse of the The data are given in Table 11.2: Analysis of Sample Data and volume, rather than versus the volume.
Analysis of Sample Data Pressure (torr) Volume (ml) 1/Volume (1/ml) Pressure Volume
760 960 1160 1360 1500 1650 29.0 23.0 19.0 16.2 14.7 13.3 0.0345 0.0435 0.0526 0.0617 0.0680 0.0752
Table 11.2
Figure 11.2
Notice also that, with elegant simplicity, the data points form a straight line. Furthermore, the straight line seems to connect to the origin by
{0, 0}.
1 V :
P =k
1 V
(11.2)
106
PV = k
(11.3)
In other words, if we go back and multiply the pressure and the volume together for each experiment, we should get the same number each time. These results are shown in the last column of Table 11.2: Analysis of Sample Data, and we see that, within the error of our data, all of the data points give the same value of the product of pressure and volume. (The volume measurements are given to three decimal places and hence are accurate to a little better than 1%. The values of other, so the uctuations are not meaningful.) We should wonder what signicance, if any, can be assigned to the number
Pressure Volume
22040 (torrml)
we have
observed. It is easy to demonstrate that this "constant" is not so constant. We can easily trap any amount of air in the syringe at atmospheric pressure. This will give us any volume of air we wish at 760 torr pressure. Hence, the value
22040 (torrml)
our sample measurement. Furthermore, if we heat the syringe with a xed amount of air, we observe that the volume increases, thus changing the value of the
product of pressure and volume is a constant for a given amount of air at a xed temperature. This observation is referred to as Boyle's Law, dating to 1662.
The data given in Table 11.1: Sample Data from Pressure-Volume Measurement assumed that we used air for the gas sample. (That, of course, was the only gas with which Boyle was familiar.) We now experiment with varying the composition of the gas sample. For example, we can put oxygen, hydrogen, nitrogen, helium, argon, carbon dioxide, water vapor, nitrogen dioxide, or methane into the cylinder. In each case we start with 29.0 ml of gas at 760 torr and 25 C. We then vary the volumes as in Table 11.1: Sample Data from Pressure-Volume Measurement and measure the pressures. Remarkably, we nd that the pressure of each gas is exactly the same as every other gas at each volume given. For example, if we press the syringe to a volume of 16.2 ml, we observe a pressure of 1360 torr, no matter which gas is in the cylinder. This result also applies equally well to mixtures of dierent gases, the most familiar example being air, of course. We conclude that the pressure of a gas sample depends on the volume of the gas and the temperature, but not on the composition of the gas sample. study (Chapter 3). We now add to this result a conclusion from a previous Specically, we recall the Law of Combining Volumes (Law 3.1, Law of Combining
22040 (torrml).
Volumes, p. 10), which states that, when gases combine during a chemical reaction at a xed pressure and temperature, the ratios of their volumes are simple whole number ratios. We further recall that this result can be explained in the context of the atomic molecular theory by hypothesizing that equal volumes of gas contain equal numbers of gas particles, independent of the type of gas, a conclusion we call
Avogadro's Hypothesis. Combining this result with Boyle's law reveals that the pressure of a gas depends on the number of gas particles, the volume in which they are contained, and the temperature of the sample. The pressure does not depend on the type of gas particles in the sample or whether they are even all the
same. We can express this result in terms of Boyle's law by noting that, in the equation
P V = k , the "constant"
is actually a function which varies with both number of gas particles in the sample and the temperature
P V = k (N, t)
explicitly showing that the product of pressure and volume depends on gas sample, and
(11.4)
N,
t,the
temperature.
It is interesting to note that, in 1738, Bernoulli showed that the inverse relationship between pressure and volume could be proven by assuming that a gas consists of individual particles colliding with the walls of the container. However, this early evidence for the existence of atoms was ignored for roughly 120 years, and the atomic molecular theory was not to be developed for another 70 years, based on mass measurements rather than pressure measurements.
107
etc.)
We assume that this property will have the same value when
it is placed in contact with two objects which have the same "hotness" or temperature. Somewhat obliquely, this denes the temperature measurement. For simplicity, we illustrate with a mercury-lled glass tube thermometer. We observe quite easily that when the tube is inserted in water we consider "hot," the volume of mercury is larger than when we insert the tube in water that we consider "cold." Therefore, the volume of mercury is a measure of how hot something is. Furthermore, we observe that, when two very dierent objects appear to have the same "hotness," they also give the same volume of mercury in the glass tube. This allows us to make quantitative comparisons of "hotness" or temperature based on the volume of mercury in a tube. All that remains is to make up some numbers that dene the scale for the temperature, and we can literally do this in any way that we please. This arbitrariness is what allows us to have two dierent, but perfectly acceptable, temperature scales, such as Fahrenheit and Centigrade. The latter scale simply assigns zero to be the temperature at which water freezes at atmospheric pressure. thermometer into freezing water, and mark the level of the mercury as "0". We then insert our mercury Another point on our scale
assigns 100 to be the boiling point of water at atmospheric pressure. We insert our mercury thermometer into boiling water and mark the level of mercury as "100." Finally, we just mark o in increments of
1 100 of the distance between the "0" and the "100" marks, and we have a working thermometer. Given the arbitrariness
of this way of measuring temperature, it would be remarkable to nd a quantitative relationship between temperature and any other physical property. Yet that is what we now observe. We take the same syringe used in the previous section and trap in it a small sample of air at room temperature and atmospheric pressure. (From our observations above, it should be clear that the type of gas we use is irrelevant.) The experiment consists of measuring the volume of the gas sample in the syringe as we vary the temperature of the gas sample. In each measurement, the pressure of the gas is held xed by allowing the piston in the syringe to move freely against atmospheric pressure. A sample set of data is shown in Table 11.3: Sample Data from Volume-Temperature Measurement and plotted here (Figure 11.3: Volume vs. Temperature of a Gas).
108
Figure 11.3
We nd that there is a simple linear (straight line) relationship between the volume of a gas and its temperature as measured by a mercury thermometer. We can express this in the form of an equation for a line:
V = t +
(11.5)
109
where
in this case,
= 0.335
and,
t is the temperature in C. and are the = 91.7. We can rewrite this equation in a V = t+
(11.6)
must be a temperature, since we can add it to a temperature. This is a particularly important quantity: if we were to set the temperature of the gas equal to = 273 C, we would nd that the volume of the gas would be exactly 0! (This assumes
This is the same equation, except that it reveals that the quantity that this equation can be extrapolated to that temperature. This is quite an optimistic extrapolation, since we haven't made any measurements near to
273 C.
solid before we ever reached that low temperature.) Since the volume depends on the pressure and the amount of gas (Boyle's Law), then the values of
and
also depend on the pressure and amount of gas and carry no particular signicance. However, when we
repeat our observations for many values of the amount of gas and the xed pressure, we nd that the
ratio
of this temperature at this point, we can assert that it is a true constant, independent of any choice of the conditions of the experiment. We refer to this temperature as the temperature of any gas below this temperature.
this value would be predicted to produce a negative gas volume. Evidently, then, we cannot expect to lower This provides us an "absolute temperature scale" with a zero which is not arbitrarily dened. This we dene by adding 273 (the value of
) to temperatures measured in C, and we dene this scale to be in units of degrees Kelvin (K). The data in Table 11.3: Sample Data from Volume-Temperature Measurement
are now recalibrated to the absolute temperature scale in Table 11.4: Analysis of Volume-Temperature Data and plotted here (Figure 11.4: Volume vs. Absolute Temperature of a Gas).
110
Figure 11.4
Note that
provided that the pressure and amount of gas are held constant. This result is known as dating to 1787. As with Boyle's Law, we must now note that the "constant" not depend on the
Charles' Law,
also depends on the pressure and quantity of gas. Also as with Boyle's Law, we note that Charles' Law does
type of gas on which we make the measurements, but rather depends only the number
of particles of gas. Therefore, we slightly rewrite Charles' Law to explicit indicate the dependence of k on the pressure and number of particles of gas
V = k (N, P ) T
(11.8)
P V = k1 (N, T )
Available for free at Connexions <http://cnx.org/content/col10264/1.5>
(11.9)
111
Charles' Law relates the volume and temperature at constant pressure and amount of gas:
V = k2 (N, P ) T
(11.10)
The Law of Combining Volumes leads to Avogadro's Hypothesis that the volume of a gas is proportional to the number of particles (N ) provided that the temperature and pressure are held constant. We can express this as
V = k3 (P, T ) N V , T,
and
(11.11)
We will demonstrate below that these three relationships can be combined into a single equation relating
P,
N.
Jumping to the conclusion, however, we can more easily show that these three relationships
can be considered as special cases of the more general equation known as the
P V = nRT
where number,
(11.12) by Avogadro's
R is a NA
constant,
n=
In Boyle's Law, we examine the relationship of
N NA V
when
(11.13)
N ) and T are xed. In the Ideal Gas P V is also constant. Therefore, Boyle's nR Law is a special case of the Ideal Gas Law. If n and P are xed in the Ideal Gas Law, then V = P T and nR is a constant. Therefore, Charles' Law is also a special case of the Ideal Gas Law. Finally, if P and T P RT are constant, then in the Ideal Gas Law, V = P n and the volume is proportional the number of moles or
and (or Law, when
and
are constant,
nRT
particles. Hence, Avogadro's hypothesis is a special case of the Ideal Gas Law. We have now shown that the each of our experimental observations is consistent with the Ideal Gas Law. We might ask, though, how did we get the Ideal Gas Law? We would like to derive the Ideal Gas Law from the three experiemental observations. To do so, we need to learn about the functions
k1 (N, T ), k2 (N, P ), T
k3 (P, T ).
We begin by examining Boyle's Law in more detail: if we hold
and
to vary, the volume must increase with the temperature in agreement with Charles' Law. In other words, with
N
to
and
T.
Therefore,
k1
T: k1 (N, T ) = k4 (N ) T
(11.14)
where
k4
N.
P V = k4 (N ) T
the number of particles. Therefore
Avogadro's Hypothesis tells us that, at constant pressure and temperature, the volume is proportional to
k4
k4 (N ) = k N
where
(11.16)
is yet another new constant. In this case, however, there are no variables left, and
is truly a
P V =kN T
This is very close to the Ideal Gas Law, except that we have the number of particles, number of the number of moles,
(11.17)
N,
instead of the
n.
We put this result in the more familiar form by expressing the number
112
NA ,
P V = k NA n T
The two constants,
(11.18)
and
NA ,
R,
the gas
N2
gas at 298K.
From the Ideal Gas Law, we can easily calculate the measured pressure of the nitrogen gas to be 0.763 atm. We now take an identical container of xed volume 25.0L, and we inject into that container 0.22 moles of
O2
gas at 298K. The measured pressure of the oxygen gas is 0.215 atm. As a third measurement, we inject
0.22 moles of
O2
mixture of gases we have prepared is very similar to that of air.) The measured pressure in this container is now found to be 0.975 atm. We note now that the of the pressures of the
O2
N2
O2
samples taken separately. We now dene the is 0.763 atm, and the partial pressure of
gas in the mixture to be the pressure of each gas as if it were the only gas present. Our measurements tell us that the partial pressure of
N2 , PN2 ,
O2 , PO2 ,
With this denition, we can now summarize our observation by saying that the total pressure of the mixture of oxygen and nitrogen is equal to the sum of the partial pressures of the two gases. general result:
Dalton's Law of Partial Pressures. Law 11.1: Dalton's Law of Partial Pressures
The total pressure of a mixture of gases is the sum of the partial pressures of the component gases in the mixture
113
n2 > n1 ,
Exercise 11.2
Sketch a graph with two curves showing Pressure vs. number of moles of gas, with the two curves. 1/Volume for two dierent values of the
n2 > n1 ,
Exercise 11.3
two curves.
Sketch a graph with two curves showing Volume vs. Temperature for two dierent values of the number of moles of gas, with
n2 > n 1 ,
Exercise 11.4
Sketch a graph with two curves showing Volume vs Temperature for two dierent values of the pressure of the gas, with the two curves.
P2 > P 1 ,
Exercise 11.5
is observed to have the same value, independent of the quantity of gas studied and the type of gas studied. What is the signicance of the quantity ? Why is it more signicant than either or ?
Exercise 11.6 Amonton's Law says that the pressure of a gas is proportional to the absolute temperature for a
xed quantity of gas in a xed volume. Thus,
P = k (N, V ) T .
Using Boyle's Law in your reasoning, demonstrate that the "constant" in Charles' Law, is inversely proportional to
i.e.
P.
Explain how Boyle's Law and Charles' Law may be combined to the general result that, for constant quantity of gas,
P V = kT .
Using Dalton's Law and the Ideal Gas Law, show that the partial pressure of a component of a gas mixture can be calculated from
Pi = P Xi
Where
(11.19)
Xi
is the
dened by
Xi =
ni ntotal
Exercise 11.10
Dry air is 78.084% nitrogen, 20.946% oxygen, 0.934% argon, and 0.033% carbon dioxide. Determine the mole fractions and partial pressures of the components of dry air at standard pressure.
Exercise 11.11
114
k2
is a constant.
Inserting
P V = k1 , where k1 is a constant. Charles' Law states that V = k2 T , V from Charles' Law into Boyle's Law results in P k2 T = k1 . k read P T = 1 = a constant. Therefore, the pressure of a gas is inversely k2
proportional to the temperature of the gas. In your assessment, you must determine what information is correct or incorrect, provide the correct information where needed, explain whether the reasoning is logical or not, and provide logical reasoning where needed.
Chapter 12
The Kinetic Molecular Theory
1
12.1 Foundation
We assume an understanding of the atomic molecular theory postulates, including that all matter is composed of discrete particles. The elements consist of identical atoms, and compounds consist of identical molecules, which are particles containing small whole number ratios of atoms. We also assume that we have determined a complete set of relative atomic weights, allowing us to determine the molecular formula for any compound. Finally, we assume a knowledge of the
12.2 Goals
Our continuing goal is to relate the properties of the atoms and molecules to the properties of the materials which they comprise. As simple examples, we compare the substances water, carbon dioxide, and nitrogen. Each of these is composed of molecules with few (two or three) atoms and low molecular weight. However, the physical properties of these substances are very dierent. Carbon dioxide and nitrogen are gases at room temperature, but it is well known that water is a liquid up to 100 C. To liquefy nitrogen, we must cool it to -196 C, so the boiling temperatures of water and nitrogen dier by about 300 C. Water is a liquid over a rather large temperature range, freezing at 0 C. In contrast, nitrogen is a liquid for a very narrow range of temperatures, freezing at -210 C. Carbon dioxide poses yet another very dierent set of properties. At atmospheric pressure, carbon dioxide gas cannot be liqueed at all: cooling the gas to -60 C converts it directly to solid "dry ice." As is commonly observed, warming dry ice does not produce any liquid, as the solid sublimes directly to gas. Why should these materials, whose molecules do not seem all that dierent, behave so dierently? What are the important characteristics of these molecules which produce these physical properties? It is important to keep in mind that these are properties of the bulk materials. At this point, it is not even clear that the concept of a molecule is useful in answering these questions about melting or boiling. There are at least two principal questions that arise about the cannot be calculated from
First, it is interesting to
ask whether this law always holds true, or whether there are conditions under which the pressure of the gas
Gas Law
nRT V . We thus begin by considering the limitations of the validity of the . We shall nd that the ideal gas law is only approximately accurate and that there are variations
Ideal
which do depend upon the nature of the gas. Second, then, it is interesting to ask why the ideal gas law should ever hold true. In other words, why are the variations not the rule rather than the exception? To answer these questions, we need a model which will allow us to relate the properties of bulk materials to the characteristics of individual molecules. We seek to know what happens to a gas when it is compressed into a smaller volume, and why it generates a greater resisting pressure when compressed. Perhaps most
1 This
116
fundamentally of all, we seek to know what happens to a substance when it is heated. What property of a gas is measured by the temperature?
PV nRT for these conditions. Here (Figure 12.1: Validity of the Ideal Gas Law), the value of this ratio is plotted for several gases n as a function of the "particle density" of the gas in moles, V . To make the analysis of this plot more convenient, the particle density is given in terms of the particle density of an ideal gas at room temperature mol and atmospheric pressure (i.e. the density of air), which is 0.04087 L . In this gure (Figure 12.1: Validity of the Ideal Gas Law), a particle density of 10 means that the particle density of the gas is 10 times the
P, V
PV nRT , calculated PV , n, and T , should always be equal to 1, exactly. Deviation of nRT from 1
We thus measure the pressure for several gases under a variety
n, V ,
T,
particle density of air at room temperature. The x-axis in the gure (Figure 12.1: Validity of the Ideal Gas Law) is thus unitless.
Figure 12.1
PV nRT on the y-axis is also unitless and has value exactly 1 for an ideal gas. We observe in PV the data in this gure (Figure 12.1: Validity of the Ideal Gas Law) that nRT is extremely close to 1 for
Note that particle densities which are close to that of normal air. Therefore, deviations from the not expected under "normal" conditions. This is not surprising, since the
Ideal Gas Law are Boyle's Law, Charles' Law, and Ideal Gas Law
were all observed under normal conditions. This gure (Figure 12.1:
Validity of the Ideal Gas Law) also shows that, as the particle density increases above the normal range, the
PV nRT starts to vary from 1, and the variation depends on the type of gas we are analyzing. However, even for particle densities 10 times greater than that of air at atmospheric pressure, the is
value of accurate to a few percent.
117
Thus, to observe any signicant deviations from somewhat more extreme values.
P V = nRT ,
The results for such extreme conditions are shown here (Figure 12.2:
Deviations from the Ideal Gas Law). Note that the densities considered are large numbers corresponding to very high pressures. Under these conditions, we nd substantial deviations from the addition, we see that the pressure of the gas (and thus from the . In PV ) does depend strongly on which type of gas we nRT are examining. Finally, this gure (Figure 12.2: Deviations from the Ideal Gas Law) shows that deviations
Ideal Gas Law can generate pressures either greater than or less than that predicted by the Ideal Gas Law. Deviations from the Ideal Gas Law
Figure 12.2
Ideal Gas Law is valid, the pressure of a gas is independent of the nature
of the gas, and is therefore independent of the characteristics of the particles of that gas. We can build on this observation by considering the signicance of a low particle density. Even at the high particle densities considered in this gure (Figure 12.2: Deviations from the Ideal Gas Law), all gases have low density in comparison to the densities of liquids. To illustrate, we note that 1 gram of liquid water at its boiling point has a volume very close to 1 milliliter. In comparison, this same 1 gram of water, once evaporated into steam, has a volume of over 1700 milliliters. How does this expansion by a factor of 1700 occur? It is not credible that the individual water molecules suddenly increase in size by this factor. The only plausible conclusion is that the distance between gas molecules has increased dramatically. Therefore, it is a characteristic of a gas that the molecules are far apart from one another. In addition, the lower the density of the gas the farther apart the molecules must be, since the same number of molecules occupies a larger volume at lower density. We reinforce this conclusion by noting that liquids and solids are virtually incompressible, whereas gases are easily compressed. This is easily understood if the molecules in a gas are very far apart from one another, in contrast to the liquid and solid where the molecules are so close as to be in contact with one another.
118
(Deviations from the Ideal Gas Law) that the pressure exerted by a gas depends only on the number of particles in the gas and is independent of the type of particles in the gas, provided that the density is low enough. This requires that the gas particles be far enough apart. We conclude that the becomes irrelevant. Why should this large distance be required? If gas particle A were far enough away from gas particle B that they experience no electrical or magnetic interaction, then it would not matter what types of particles A and B were. Nor would it matter what the sizes of particles A and B were. Finally, then, we conclude from this reasoning that the validity of the ideal gas law rests of the presumption that there are no interactions of any type between gas particles.
holds true because there is sucient distance between the gas particles that the identity of the gas particles
1020
particles or more, and following the path of each particle is out of the
question. Therefore, we seek a model which permits calculation of the pressure without this information. Based on our observations and deductions, we take as the postulates of our model:
A gas consists of individual particles in constant and random motion. The individual particles have negligible volume. The individual particles do not attract or repel one another in any way. The pressure of the gas is due entirely to the force of the collisions of the gas particles with the walls of the container.
V,
of collisions of particles with the walls. The number of collisions we observe depends on how long we wait. Let's measure the pressure for a period of time
(t)
period. For a particle to collide with the wall within the time a distance
(t),
v,
v (t)
of the wall to hit it. Also, if we are measuring the force exerted on the area
A,
the particle
must hit that area to contribute to our pressure measurement. For simplicity, we can view the situation pictorially here (Figure 12.3: Collision of a Particle with a Wall within time
t).
We assume that the particles are moving perpendicularly to the walls. (This is clearly not
119
true. However, very importantly, this assumption is only made to simplify the mathematics of our derivation. It is not necessary to make this assumption, and the result is not aected by the assumption.) In order for a particle to hit the area the cylinder is and cross-sectional area
A marked on the wall, it must lie within the cylinder shown, which is of length v (t) A. The volume of this cylinder is Av (t), so the number of particles contained in (Av (t)) N . V
Figure 12.3
(t),
in the correct direction. There are six directions for a particle to go, corresponding to plus or minus direction
1 6, assuming as we have that the motions are all random. Therefore, the number of particles which impact the N wall in time (t) is (Av (t)) 6V . The force generated by these collisions is calculated from Newton's equation, F = ma, where a is the
in x, y, or z. Therefore, on average, the fraction of particles moving in the correct direction should be acceleration due to the collisions. with velocity Consider rst a single particle moving directly perpendicular to a wall
t).
the particle collides with the wall, the wall does not move, so the collision must generally conserve the energy of the particle. Then the particle's velocity after the collision must be number of collisions in velocity per time) is
v ,
opposite direction. Thus, the change in velocity of the particle in this one collision is
2v .
Multiplying by the
(t)
(t),
2AN v 2 6V , and the force imparted on the wall due collisions is found by multiplying by the mass of the particles:
F =
2AN mv 2 6V
(12.1)
120
P =
or, rearranged for comparison to
Boyle's Law,
N mv 2 3V N mv 2 3 PV ,
is a constant, in agreement with
(12.2)
PV =
(12.3)
Since we have assumed that the particles travel with constant speed a constant. Therefore the product of pressure times volume,
Boyle's
is proportional to the number of particles, also in agreement with Therefore, the model we have developed to describe an ideal gas is
consistent with our experimental observations. We can draw two very important conclusions from this derivation. First, the inverse relationship observed between pressure and volume and the independence of this relationship on the type of gas analyzed are both due to the lack of interactions between gas particles. Second, the lack of interactions is in turn due to the great distances between gas particles, a fact which will be true provided that the density of the gas is low.
Therefore, there
must be a greater signicance (and less arbitrariness) to the temperature than might have been expected. To discern this signicance, we rewrite the last equation above in the form:
PV =
1 2 2 mv
2 N 3
1 mv 2 2
(12.4)
The last quantity in parenthesis can be recognized as the kinetic energy of an individual gas particle, and
PV =
Now we insert the
2 KE 3 3 nRT 2
(12.5)
to nd that
KE =
(12.6)
This is an extremely important conclusion, for it reveals the answer to the question of what property is measured by the temperature. We see now that the temperature is a measure of the total kinetic energy of the gas. Thus, when we heat a gas, elevating its temperature, we are increasing the average kinetic energy of the gas particles, causing then to move, on average, more rapidly.
121
of our model of the behavior of an ideal gas is that the gas molecules do not interact. This allowed us to calculate the force imparted on the wall of the container due to a single particle collision without worrying about where the other particles were. In order for a gas to disobey the be such that this assumption is violated. What do the deviations from ideality tell us about the gas particles? Starting with very low density and increasing the density as in Figure 12.1 (Validity of the Ideal Gas Law), we nd that, for many gases, the
PV nRT falls below 1. One way to state this result is that, for a given value of V , n, and T , the pressure of the gas is less than it would have been for an ideal gas. This must be the result of the interactions of
value of the gas particles. In order for the pressure to be reduced, the force of the collisions of the particles with the walls must be less than is predicted by our model of an ideal gas. Therefore, the eect of the interactions is to slow the particles as they approach the walls of the container. This means that an individual particle approaching a wall must experience a force acting to pull it back into the body of the gas. Hence, the gas particles must attract one another. Therefore, the eect of increasing the density of the gas is that the gas particles are conned in closer proximity to one another. At this closer range, the attractions of individual particles become signicant. It should not be surprising that these attractive forces depend on what the particles are. We note in Figure 12.1 (Validity of the Ideal Gas Law) that deviation from the
Law
Ideal Gas
is greater for ammonia than for nitrogen, and greater for nitrogen than for helium.
Therefore, the
attractive interactions of ammonia molecules are greater than those of nitrogen molecules, which are in turn greater than those of helium atoms. We analyze this conclusion is more detail below. Continuing to increase the density of the gas, we nd in Figure 12.2 (Deviations from the Ideal Gas
PV nRT begins to rise, eventually exceeding 1 and continuing to increase. Under these conditions, therefore, the pressure of the gas is greater than we would have expected from our model of
Law) that the value of non-interacting particles. What does this tell us? The gas particles are interacting in such a way as to increase the force of the collisions of the particles with the walls. This requires that the gas particles repel one another. As we move to higher density, the particles are forced into closer and closer proximity. We can conclude that gas particles at very close range experience strong repulsive forces away from one another. Our model of the behavior of gases can be summarized as follows: at low density, the gas particles are suciently far apart that there are no interactions between them. In this case, the pressure of the gas is independent of the nature of the gas and agrees with the
the particles are closer together and the interaction forces between the particles are attractive. The pressure of the gas now depends on the strength of these interactions and is lower than the value predicted by the
At still higher densities, the particles are excessively close together, resulting in repulsive
interaction forces. The pressure of the gas under these conditions is higher than the value predicted by the
molecular properties and the physical properties of bulk amounts of substance. As a distinct example of such an application, we now examine the boiling points of various compounds, focusing on hydrides of sixteen elements in the main group (Groups IV through VII). These are given here (Table 12.1: Boiling Points of Hydrides of Groups IV to VII).
122
In tabular form, there are no obvious trends here, and therefore no obvious connection to the structure or bonding in the molecules. The data in the table (Table 12.1: Boiling Points of Hydrides of Groups IV to VII) are displayed in a suggestive form, however, in Figure 12.4 (Boiling Points of Main Group Hydrides), the boiling point of each hydride is plotted according to which period (row) of the periodic table the main group element belongs. For example, the Period 2 hydrides (CH4 , etc. Now a few trends are more apparent. First, the lowest boiling points in each period are associated with the Group IV hydrides (CH4 , the Group VI hydrides (H2 O ,
N H3 , H2 O,
and
column to the left of the gure, followed by a column for the Period 3 hydrides (SiH4 ,
SiH4 , GeH4 , SnH4 ), and the highest boiling points in each period belong to H2 S , H2 Se, H2 T e). For this reason, the hydrides belonging to a single group
have been connected in Figure 12.4 (Boiling Points of Main Group Hydrides).
123
Figure 12.4
Second, we notice that, with the exceptions of points increase in the order point of all.
N H3 , H2 O,
and
HF ,
always increase in a single group as we go down the periodic table: for example, in Group IV, the boiling
We begin our analysis of these trends by assuming that there is a relationship between the boiling points of these compounds and the structure and bonding in their molecules. Recalling our kinetic molecular model of gases and liquids, we recognize that a primary dierence between these two phases is that the strength of the interaction between the molecules in the liquid is much greater than that in the gas, due to the proximity of the molecules in the liquid. In order for a molecule to leave the liquid phase and enter into the gas phase, it must possess sucient energy to overcome the interactions it has with other molecules in the liquid. Also recalling the kinetic molecular description, we recognize that, on average, the energies of molecules increase with increasing temperature. We can conclude from these two statements that a high boiling point implies that signicant energy is required to overcome intermolecular interactions. Conversely, a substance with a low boiling point must have weak intermolecular interactions, surmountable even at low temperature. In light of these conclusions, we can now look at Figure 12.4 (Boiling Points of Main Group Hydrides) as directly (though qualitatively) revealing the comparative strengths of intermolecular interactions of the various hydrides. For example, we can conclude that, amongst the hydrides considered here, the intermolecular interactions are greatest between
H2 O
CH4
three trends in this gure, described above, in light of the strength of intermolecular forces.
124
(Boiling Points of Main Group Hydrides); the only exceptions to this trend are
N H3 , H2 O, and HF .
We can
conclude that, with notable exceptions, intermolecular interactions increase with increasing atomic number of the central atom in the molecule. This is true whether the molecules of the group considered have dipole moments (as in Groups V, VI, and VII) or not (as in Group IV). We can infer that the large intermolecular attractions for molecules with large central atoms arises from the large number of charged particles in these molecules. This type of interaction arises from forces referred to as
These
forces are believed to arise from the instantaneous interactions of the charged particles from one molecule with the charged particles in an adjacent molecule. Although these molecules may not be polar individually, the nuclei in one molecule may attract the electrons in a second molecule, thus inducing an instantaneous dipole in the second molecule. In turn, the second molecule induces a dipole in the rst. Thus, two non-polar molecules can interact as if there were dipole-dipole attractions between them, with positive and negative charges interacting and attracting. The tendency of a molecule to have an induced dipole is called the
polarizable
a molecule is and the greater the attractions arising from dispersion forces will be. Second, we note that, without exception, the Group IV hydrides must have the weakest intermolecular As noted above, these are the only hydrides that have no dipole moment. Consequently, in general, molecules without dipole moments have weaker interactions than molecules which are polar. We must qualify this carefully, however, by noting that the nonpolar point than the polar
SnH4
P H3 and HCl.
of molecules with heavier atoms can oset the lack of a molecular dipole. Third, and most importantly, we note that the intermolecular attractions involving
N H3 , H2 O,
and
HF
must be uniquely and unexpectedly large, since their boiling points are markedly out of line with
those of the rest of their groups. The common feature of these molecules is that they contain small atomic number atoms which are strongly electronegative, which have lone pairs, and which are bonded to hydrogen atoms. Molecules without these features do not have unexpectedly high boiling points. We can deduce from these observations that the hydrogen atoms in each molecule are unusually strongly attracted to the lone pair electrons on the strongly electronegative atoms with the same properties in other molecules. This intermolecular attraction of a hydrogen atom to an electronegative atom is referred to as dispersion forces or dipole-dipole attractions.
hydrogen bonding.
It is clear from our boiling point data that hydrogen bonding interactions are much stronger than either
125
Explain the signicance to the development of the kinetic molecular model of the observation that the pressure predicted by the ideal gas law is independent of the type of gas.
PV nRT as a function of density for two gases, one with strong intermolecular attractions and one with weak intermolecular attractions but strong repulsions.
Give a brief molecular explanation for the observation that the pressure of a gas at xed temperature increases proportionally with the density of the gas.
Give a brief molecular explanation for the observation that the pressure of a gas conned to a xed volume increases proportionally with the temperature of the gas.
Give a brief molecular explanation for the observation that the volume of a balloon increases roughly proportionally with the temperature of the gas inside the balloon.
Explain why there is a correlation between high boiling point and strong deviation from the
Ideal
Referring to Figure 12.4 (Boiling Points of Main Group Hydrides), explain why the hydride of the Group 4 element always has the lowest boiling point in each period.
CH4
CH4
126
Chapter 13
Phase Equilibrium and Intermolecular Interactions
1
13.1 Foundation
The "phase" of a substance is the particular physical state it is in. The most common phases are solid, liquid, and gas, each easily distinguishable by their signicantly dierent physical properties. A given substance can exist in dierent phases under dierent conditions: water can exist as solid ice, liquid, or steam, but water molecules are
H2 O
any chemical transformation: the evaporation of water or the melting of ice occur without decomposition or modication of the water molecules. In describing the diering states of matter changes between them, we will also assume an understanding of the principles of the
Molecular Theory.
individual molecules.
13.2 Goals
We have developed a very clear molecular picture of the gas phase, via the Kinetic Molecular Theory. The gas particles (atoms or molecules) are very distant from one another, suciently so that there are no interactions between the particles. The path of each particle is independent of the paths of all other particles. We can determine many of the properties of the gas from this description; for example, the pressure can be determined by calculating the average force exerted by collisions of the gas particles with the walls of the container. To discuss liquids and solids, though, we will be forced to abandon the most fundamental pieces of the Kinetic Molecular Theory of Gases. First, it is clear that the particles in the liquid or solid phases are very much closer together than they are in the gas phase, because the densities of these "condensed" phases are of the order of a thousand times greater than the typical density of a gas. In fact, we should expect that the particles in the liquid or solid phases are essentially in contact with each other constantly. Second, since the particles in liquid or solid are in close contact, it is not reasonable to imagine that the particles do no interact with one another. Our assumption that the gas particles do not interact is based, in part, on the concept that the particles are too far apart to interact. Moreover, particles in a liquid or solid must interact, for without attractions between these particles, random motion would require that the solid or liquid dissipate or fall apart. In this study, we will pursue a model to describe the dierences between condensed phases and gases and to describe the transitions which occur between the solid, liquid, and gas phases. We will nd that
1 This
128
intermolecular interactions play the most important role in governing phase transitions, and we will pursue an understanding of the variations of these intermolecular interactions for dierent substances.
Charles' Law.
a cylinder tted with a piston, and we apply a xed pressure to the piston. We vary the temperature of the gas, and since the pressure applied to the piston is constant, the piston moves to maintain a constant pressure of the trapped gas. At each temperature, we then measure the volume of the gas. From our previous observations, we know that the volume of the gas is proportional to the absolute temperature in degrees Kelvin. Thus a graph of volume versus absolute temperature (Figure 13.1: Vapor-Liquid Phase Transition) is a straight line, which can be extrapolated to zero volume at 0K.
Figure 13.1
Consider, then, trying to measure the volume for lower and lower temperatures to follow the graph (Figure 13.1: Vapor-Liquid Phase Transition). To be specic, we take exactly 1.00 mol of butane
C4 H10
at 1 atm pressure. As we lower the temperature from 400K to 300K, we observe the expected proportional decrease in the volume from 32.8L to 24.6L and this proportionality works very well for temperatures just slightly above 272.6K, where the volume is 22.4L. However, when we reach 272.6K, the volume of the butane drops very abruptly, falling to about 0.097L at temperatures just slightly below 272.6K. This is less than onehalf of one percent of the previous volume! The striking change in volume is shown in the graph (Figure 13.1: Vapor-Liquid Phase Transition) as a vertical line at 272.6K. This dramatic change in physical properties at one temperature is referred to as a
phase transition.
If we reverse the
When cooling butane through the temperature 272.6K, the butane is abruptly converted at that temperature from one phase, gas, to another phase, liquid, with very dierent physical properties.
129
process, starting with liquid butane at 1 atm pressure and temperature below 272.6K and then heating, we nd that the butane remains entirely liquid for temperatures below 272.6K and then becomes entirely gas for temperatures above 272.6K. We refer to the temperature of the phase transition as the temperature. (We will discuss the phases present
boiling point
temperature, in another section (Section 13.4: Observation 2: Vapor pressure of a liquid).) We now consider how the phase transition depends on a variety of factors. First, we consider capturing 2.00 mol of butane in the cylinder initially, still at 1 atm pressure. The volume of 2.00 mol is twice that of 1.00 mol, by
Avogadro's hypothesis.
in Figure 13.2 (Variation of Phase Transition with Pressure) along with the previous result for 1.00 mol. Note that the phase transition is observed to occur at exactly the same temperature, 272.6K, even though there is double the mass of butane.
Figure 13.2
constant 2.00 atm pressure is also shown in Figure 13.2 (Variation of Phase Transition with Pressure). We observe the now familiar phase transition with a similar dramatic drop in volume. However, in this case, we nd that the phase transition occurs at 293.2K, over 20K higher than at the lower pressure. Therefore, the temperature of the phase transition depends on the pressure applied. We can measure the boiling point temperature of butane as a function of the applied pressure, and this result is plotted here (Figure 13.3: Boiling Point versus Pressure).
130
Figure 13.3
Finally, we consider varying the substance which we trap in the cylinder. In each case, we discover that the boiling point temperature depends on both what the substance is and on the applied pressure, but does not depend on the amount of the substance we trap. In Figure 13.3 (Boiling Point versus Pressure), we have also plotted the boiling point as a function of the pressure for several substances. It is very clear that the boiling points for dierent substances can be very dierent from one another, although the variation of the boiling point with pressure looks similar from one substance to the next.
volatility:
131
more readily. To make a quantitative measure of liquid volatility, we slightly modify our previous cylinderpiston apparatus by adding a gauge to measure the pressure of gas inside the cylinder. (Here (Figure 13.4: Measuring Vapor Pressure) is an illustration.) We begin with liquid water only in the cylinder with an applied pressure of 1 atm at a temperature of 25 C. We now pull back the piston by an arbitrary amount, and then we lock the piston in place, xing the volume trapped inside the cylinder. We might expect to have created a vacuum in the cavity above the liquid water, and as such we might expect that the pressure inside the cylinder is small or zero.
Figure 13.4
Although there was initially no gas in the container, we observe that the pressure inside the container rises to a xed value of 23.8 torr. Clearly, the observation of pressure indicates the presence of gaseous water inside the container, arising from evaporation of some, but not all, of the liquid water. Therefore, some of the liquid water must have evaporated. On the other hand, a look inside the container reveals that there is still liquid water present. Since both a liquid phase and a gas phase are present at the same time, we say that the liquid water and the water vapor must be in both phases are stable at equilibrium. Very interestingly, we can repeat this measurement by pulling the piston back to any other arbitrary position before locking it down, and, provided that there is still some liquid water present, the pressure in the container in every case rises to the same xed value of 23.8 torr. It does not matter what volume we have trapped inside the cylinder, nor does it matter how much liquid water we started with. liquid is 23.8 torr at 25 C. As long as there is still some liquid water present in the cylinder at equilibrium, the pressure of the vapor above that
phase equilibrium.
The term
equilibrium in this
case indicates that neither the vapor nor the liquid spontaneously converts into the other phase. Rather,
Note that, in varying either the amount of liquid initially or the xed volume of the container, the This can be seen from the fact that
the volume available for vapor must be dierent in varying either the volume of the container or the initial volume of the liquid. Since we observe that the pressure of the vapor is the same at a xed temperature, the diering volumes reveal diering numbers of moles of water vapor. Clearly it is the
pressure
of the
vapor, not the amount, which is the most important property in establishing the equilibrium between the liquid and the vapor. We can conclude that, at a given xed temperature, there is a single specic pressure at which a given liquid and its vapor will be in phase equilibrium. We call this the liquid. We can immediately observe some important features of the vapor pressure. First, for a given substance,
132
the vapor pressure varies with the temperature. This can be found by simply increasing the temperature on the closed container in the preceding experiment. In every case, we observe that the equilibrium vapor pressure increases with increases in the temperature. The vapor pressures of several liquids at several temperatures are shown here (Figure 13.5: Vapor Pressures of Various Liquids). The vapor pressure for each liquid increases smoothly with the temperature, although the relationship between vapor pressure and temperature is denitely not proportional.
Figure 13.5
Second, Figure 13.5 (Vapor Pressures of Various Liquids) clearly illustrates that the vapor pressure depends strongly on what the liquid substance is. These variations reect the diering
volatilities of the
liquids: those with higher vapor pressures are more volatile. In addition, there is a very interesting correlation between the volatility of a liquid and the boiling point of the liquid. Without exception, the substances with high boiling points have low vapor pressures and vice versa. Looking more closely at the connection between boiling point and vapor pressure, we can nd an important relationship. Looking at Figure 13.5 (Vapor Pressures of Various Liquids), we discover that the vapor pressure of each liquid is equal to 760 torr (which is equal to 1 atm) at the boiling point for that liquid. How should we interpret this? At an applied pressure of 1 atm, the temperature of the phase transition from liquid to gas is the temperature at which the vapor pressure of the liquid is equal to 1 atm. This statement is actually true regardless of which pressure we consider: if we apply a pressure of 0.9 atm, the boiling point temperature is the temperature at which the liquid as a vapor pressure of 0.9 atm. Stated generally, the liquid undergoes phase transition at the temperature where the vapor pressure equals the applied pressure.
133
both the vapor pressure as a function of the and the boiling point temperature as a function of the pressure. They are the same graph. Vapor Pressure of Liquid Water
Figure 13.6
Recall that, at the boiling point, we observe that both liquid and gas are at equilibrium with one another. This is true at every combination of applied pressure and boiling point temperature. Therefore, for every combination of temperature and pressure on the graph in Figure 13.6 (Vapor Pressure of Liquid Water), we observe liquid-gas equilibrium. What happens at temperature/pressure combinations which are not on the line in Figure 13.6 (Vapor Pressure of Liquid Water)? To nd out, we rst start at a temperature-pressure combination on the graph and elevate the temperature. The vapor pressure of the liquid rises, and if the applied pressure does not also increase, then the vapor pressure will be greater than the applied pressure. We must therefore not be at equilibrium anymore. All of the liquid vaporizes, and there is only gas in the container. Conversely, if we start at a point on the graph and lower the temperature, the vapor pressure is below the applied pressure, and we observe that all of the gas condenses into the liquid. Now, what if we start at a temperature-pressure combination on the graph and elevate the applied
134
and all of the gas will condense into the liquid. Figure 13.6 (Vapor Pressure of Liquid Water) thus actually reveals to us what phase or phases are present at each combination of temperature and pressure: along the line, liquid and gas are in equilibrium; above the line, only liquid is present; below the line, only gas is present. When we label the graph with the phase or phases present in each region as in Figure 13.6 (Vapor Pressure of Liquid Water), we refer to the graph as a
phase diagram.
Of course, Figure 13.6 (Vapor Pressure of Liquid Water) only includes liquid, gas, and liquid-gas equilibrium. We know that, if the temperature is low enough, we expect that the water will freeze into solid. To complete the phase diagram, we need additional observations. We go back to our apparatus in Figure 13.4 (Measuring Vapor Pressure) and we establish liquid-gas water phase equilibrium at a temperature of 25 C and 23.8 torr. If we slowly lower the temperature, the vapor pressure decreases slowly as well, as shown in Figure 13.6 (Vapor Pressure of Liquid Water). If we continue to lower the temperature, though, we observe an interesting transition, as shown in the more detailed Figure 13.7 (Water Phase Transitions). The very smooth variation in the vapor pressure shows a slight, almost unnoticeable break very near to 0 C. Below this temperature, the pressure continues to vary smoothly, but along a slightly dierent curve.
Figure 13.7
We nd that, at
temperatures below 0 C, the water in the container is now an equilibrium mixture of water vapor and solid water (ice), and there is no liquid present. The direct transition from solid to gas, without liquid, is called
sublimation.
For pressure-temperature combinations along this new curve below 0 C, then, the curve
shows the solid-gas equilibrium conditions. As before, we can interpret this two ways. The solid-gas curve gives the vapor pressure of the solid water as a function of temperature, and also gives the sublimation temperature as a function of applied pressure.
135
Figure 13.7 (Water Phase Transitions) is still not a complete phase diagram, because we have not included the combinations of temperature and pressure at which solid and liquid are at equilibrium. As a starting point for these observations, we look more carefully at the conditions near 0 C. Very careful measurements reveal that the solid-gas line and the liquid-gas line intersect in Figure 13.7 (Water Phase Transitions) where the temperature is 0.01 C. Under these conditions, we observe inside the container that solid, liquid, and gas are all three at equilibrium inside the container. As such, this unique temperature-pressure combination is called the
triple point.
At this point, the liquid and the solid have the same vapor pressure, so all three
phases can be at equilibrium. If we raise the applied pressure slightly above the triple point, the vapor must disappear. We can observe that, by very slightly varying the temperature, the solid and liquid remain in equilibrium. We can further observe that the temperature at which the solid and liquid are in equilibrium varies almost imperceptibly as we increase the pressure. If we include the solid-liquid equilibrium conditions on the previous phase diagram, we get this (Figure 13.8: Phase Diagram of Water), where the solid-liquid line is very nearly vertical.
Figure 13.8
Each substance has its own unique phase diagram, corresponding to the diagram in Figure 13.8 (Phase Diagram of Water) for water.
136
amount of vapor in the container. Why do we get the same pressure for the same temperature, regardless of other conditions? To address this question, we need to understand the coexistence of vapor and liquid in equilibrium. How is this equilibrium achieved? To approach these questions, let us look again at the situation in Figure 13.4 (Measuring Vapor Pressure). We begin with a container with a xed volume containing some liquid, and equilibrium is achieved at the vapor pressure of the liquid at the xed temperature given. When we adjust the volume to a larger xed volume, the pressure adjusts to equilibrium at exactly the same vapor pressure. Clearly, there are more molecules in the vapor after the volume is increased and equilibrium is reestablished, because the vapor exerts the same pressure in a larger container at the same temperature. Also clearly, more liquid must have evaporated to achieve this equilibrium. A very interesting question to pose here is how the liquid responded to the increase in volume, which presumably only aected the space in which the gas molecules move. How did the liquid "know" to evaporate when the volume was increased? The molecules in the liquid could not detect the increase in volume for the gas, and thus could not possibly be responding to that increase. The only reasonable conclusion is that the molecules in the liquid were always evaporating, even before the volume of the container was increased. There must be a constant movement of molecules from the liquid phase into the gas phase. Since the pressure of the gas above the liquid remains constant when the volume is constant, then there must be a constant number of molecules in the gas. be entering the liquid phase. liquid from the gas. At equilibrium, therefore, the pressure and temperature inside the container are unchanging, but there is constant movement of molecules between the phases. This is called If evaporation is constantly occurring, then condensation must also be occurring constantly, and molecules in the gas must constantly Since the pressure remains constant in a xed volume, then the number of molecules entering the gas from the liquid must be exactly oset by the number of molecules entering the
dynamic equilibrium.
The situation
is "equilibrium" in that the observable properties of the liquid and gas in the container are not changing, but the situation is "dynamic" in that there is constant movement of molecules between phases. The dynamic processes that take place oset each other exactly, so that the properties of the liquid and gas do not change. What happens when we increase the volume of the container to a larger xed volume? We know that the pressure equilibrates at the same vapor pressure, and that therefore there are more molecules in the vapor phase. How did they get there? It must be the case that when the volume is increased, evaporation initially occurs more rapidly than condensation until equilibrium is achieved. The rate of evaporation must be determined by the number of molecules in the liquid which have sucient kinetic energy to escape the intermolecular forces in the liquid, and according to the kinetic molecular theory, this number depends only on the temperature, not on the volume. However, the rate of condensation must depend on the frequency of molecules striking the surface of the liquid. According to the Kinetic Molecular Theory, this frequency must decrease when the volume is increased, because the density of molecules in the gas decreases. Therefore, the rate of condensation becomes smaller than the rate of evaporation when the volume is increased, and therefore there is a net ow of molecules from liquid to gas. This continues until the density of molecules in the gas is restored to its original value, at which point the rate of evaporation is matched by the rate of condensation. At this point, this pressure stops increasing and is the same as it was before the volume was increased.
137
with constant pressure until the temperature is 100 C. State what happens physically to the water during this heating process.
Exercise 13.2
In the phase diagram for water in Figure 13.6 (Vapor Pressure of Liquid Water), start at the point where the temperature is 60 C and the pressure is 400 torr. Slowly lower the pressure at constant temperature until the pressure is 80 torr. State what happens physically to the water during this process.
Exercise 13.3
Explain why Figure 13.6 (Vapor Pressure of Liquid Water) is both a graph of the boiling point of liquid water as a function of applied pressure and a graph of the vapor pressure of liquid water as a function of temperature.
Exercise 13.4
We observe that, when the applied pressure is less than the vapor pressure of a liquid, all of the liquid will spontaneously evaporate. In terms of dynamic equilibrium, explain why no liquid can be present under these conditions.
Exercise 13.5
Using arguments from the Kinetic Molecular Theory and the concept of dynamic equilibrium, explain why, at a given applied pressure, there can be one and only one temperature, the boiling point, at which a specic liquid and its vapor can be in equilibrium.
Using dynamic equilibrium arguments, explain why the vapor pressure of a liquid is independent of the amount of liquid present.
Using dynamic equilibrium arguments, explain why the vapor pressure of a liquid is independent of the volume available for the vapor above the liquid.
Using dynamic equilibrium arguments, explain why a substance with weaker intermolecular forces has a greater vapor pressure than one with stronger intermolecular forces.
According to Figure 13.5 (Vapor Pressures of Various Liquids) the vapor pressure of phenol is much less than the vapor pressure of dimethyl ether. Which of these substances has the greater intermolecular attractions? Which substance has the higher boiling point? Explain the dierence in the intermolecular attractions in terms of molecular structure.
Exercise 13.10
The text describes dynamic equilibrium between a liquid and its vapor at the boiling point. Describe the dynamic equilibrium between a liquid and its solid at the melting point. Using this description, explain why the melting point of a solid varies very little as the pressure increases.
138
Chapter 14
Reaction Equilibrium in the Gas Phase
1
14.1 Foundation
In beginning our study of the reactions of gases, we will assume a knowledge of the physical properties of gases as described by the and conclusions of the
Ideal Gas Law and an understanding of these properties as given by the postulates Kinetic Molecular Theory. We assume that we have developed a dynamic model
of phase equilibrium in terms of competing rates. We will also assume an understanding of the bonding, structure, and properties of individual molecules.
14.2 Goals
In performing stoichiometric calculations, we assume that we can calculate the amount of product of a reaction from the amount of the reactants we start with. For example, if we burn methane gas, excess oxygen, the reaction
CH4 (g),
in
(14.1)
CO2 (g)
CH4 (g)
From our study of phase transitions we have learned the concept of equilibrium. We observed that, in the transition from one phase to another for a substance, under certain conditions both phases are found to coexist, and we refer to this as phase equilibrium. of equilibrium apply to chemical reactions as well. It should not surprise us that these same concepts In the reaction (14.1), therefore, we should examine
CO2 for every mole of CH4 we start with or CO2 and CH4 . We will nd that dierent
reactions provide us with varying answers. In many cases, virtually all reactants are consumed, producing the stoichiometric amount of product. However, in many other cases, substantial amounts of reactant are still present when the reaction achieves equilibrium, and in other cases, almost no product is produced at equilibrium. Our goal will be to understand, describe and predict the reaction equilibrium. An important corollary to this goal is to attempt to control the equilibrium. We will nd that varying the conditions under which the reaction occurs can vary the amounts of reactants and products present at equilibrium. We will develop a general principle for predicting how the reaction conditions aect the amount of product produced at equilibrium.
1 This
140
N H3 ,
from
(14.2)
N2
and 3 moles of
N H3 .
In fact, if we carry out this reaction starting with these quantities of nitrogen and hydrogen at 298K
is less than predicted by the balanced equation, but the dierence is not due to a limiting reagent factor. Recall that, in stoichiometry, the limiting reagent is the one that is present in less than the ratio of moles given by the balanced equation. In this case, neither
N2
nor
H2
in a 1:3 ratio, exactly matching the stoichiometry. Note also that this seeming decit in the yield is not due to any experimental error or imperfection, nor is it due to poor measurements or preparation. Rather, the observation that, at 298K, 1.91 moles rather than 2 moles are produced is completely reproducible: every measurement of this reaction at this temperature in this volume starting with 1 mole of
H2
N2
and 3 moles of
gases are present in the gas mixture. We can determine the amounts of each gas at equilibrium from the stoichiometry of the reaction. When equilibrium is
nN2 = 0.045mol
and
N H3
of the reaction, the volume of the vessel in which the reaction occurs, or the relative starting amounts of
N2
and
H2 .
We shall study and analyze this observation in detail in later sections. For now, though, we
demonstrate that the concept of reaction equilibrium is general to all reactions. Consider the reaction
(14.3)
H2 and 1.00 mole of I2 at 500K in a reaction vessel of xed volume, we observe nHI = 1.72mol, leaving in the equilibrium mixture nH2 = 0.14mol and nI2 = 0.14mol.
N2 O4 (g) 2N O2 (g)
At 298K in a 100.0L reaction ask, 1.00 mol of
(14.4)
N2 O4
nN O2 = 0.64mol
example,
and
nN2 O4 = 0.68mol.
Some chemical reactions achieve an equilibrium that appears to be very nearly complete reaction. For
(14.5)
H2 nHCl
Cl2
H2
or
Cl2 .
This does
not mean that the reaction has not come to equilibrium. It means instead that, at equilibrium, there are essentially no reactants remaining. In each of these cases, the amounts of reactants and products present at equilibrium vary as the conditions are varied but are completely reproducible for xed conditions. equilibrium. We begin with a dynamic equilibrium description. We know from our studies of phase transitions that equilibrium occurs when the rate of the forward process ( process ( Before making further observations that will lead to a quantitative description of the reaction equilibrium, we consider a qualitative description of
e.g.
e.g.
condensation). Since we have now observed that gas reactions also come to equilibrium, we
postulate that at equilibrium the forward reaction rate is equal to the reverse reaction rate. For example,
141
in the reaction here (14.4), the rate of decomposition of matched by the rate of recombination (or
dimerization) of N O2 molecules.
N2 O 4
To show that the forward and reverse reactions continue to happen at equilibrium, we start with the
N O2 N O2
and
N2 O4
mixture at equilibrium and we vary the volume of the ask containing the mixture.
We
observe that, if we increase the volume and the reaction is allowed to come to equilibrium, the amount of at equilibrium is larger at the expense of a smaller amount of
N2 O4 .
amounts of the gases at equilibrium depend on the reaction conditions. However, if the forward and reverse reactions stop once the equilibrium amounts of material are achieved, the molecules would not "know" that the volume of the container had increased. Since the reaction equilibrium can and does respond to a change in volume, it must be that the change in volume aects the rates of both the forward and reverse processes. This means that both reactions must be occurring at equilibrium, and that their rates must exactly match at equilibrium. This reasoning reveals that the amounts of reactant and product present at equilibrium are determined by the rates of the forward and reverse reactions. If the rate of the forward reaction ( of
e.g.
decomposition
N2 O 4 )
is faster than the rate of the reverse reaction, then at equilibrium we have more product than If that dierence in rates is very large, at equilibrium there will be much more product than
reactant.
reactant. Of course, the converse of these conclusions is also true. It must also be the case that the rates of these processes depends on, amongst other factors, the volume of the reaction ask, since the amounts of each gas present at equilibrium change when the volume is changed.
N2 O4 (g) into a 100L reaction ask at 298K. Now, however, we vary the initial number N2 O4 (g) in the ask and measure the equilibrium pressures of both the reactant and product
gases. The results of a number of such studies are given here (Table 14.1: Equilibrium Partial Pressures in Decomposition Reaction).
PN2 O4
(atm)
PN O 2
(atm)
0.00764 0.071011 0.166136 0.26735 0.371791 0.478315 0.586327 0.695472 0.805517 0.916297 1.027695
0.033627 0.102517 0.156806 0.198917 0.234574 0.266065 0.294578 0.320827 0.345277 0.368255 0.389998
142
We might have expected that the amount of proportion to increases in the amount of
N O2
N2 O4
Decomposition Reaction shows that this is not the case. Note that when we increase the initial amount of
N2 O4
N O2
of less than 4. The relationship between the pressures at equilibrium and the initial amount of
N2 O 4
is perhaps more
easily seen in a graph of the data in Table 14.1: Equilibrium Partial Pressures in Decomposition Reaction, as shown in Figure 14.1 (Equilibrium Partial Pressures in Decomposition Reaction). There are some interesting
N2 O4 is less than 1 mol, the equilibrium pressure of N O2 is greater than that of N2 O4 . These relative pressures reverse as the initial amount increases, as the N2 O4 equilibrium pressure keeps track with the initial amount but the N O2 pressure falls short. Clearly, the equilibrium pressure of N O2 does not increase proportionally with the initial amount of N2 O4 . In fact, the
features here. Note that, when the initial amount of increase is slower than proportionality, suggesting perhaps a square root relationship between the pressure of
N O2
N2 O4 .
Figure 14.1
143
We test this in Figure 14.2 (Relationship of Pressure of Product to Initial Amount of Reactant) by plotting
PN O 2
N2 O4 .
of Pressure of Product to Initial Amount of Reactant) makes it clear that this is not a simple proportional relationship, but it is closer. Note in Figure 14.1 (Equilibrium Partial Pressures in Decomposition Reaction) that the equilibrium pressure suggests plotting
PN 2 O 4
N2 O4 .
This
PN O 2
PN2 O4 .
Pressures), where we discover that there is a very simple proportional relationship between the variables plotted in this way. We have thus observed that
PN O2 = c 2PN2 O4
where
(14.6)
Kp =
PN O 2 2 PN2 O4 Kp ,
Partial Pressures in Decomposition Reaction and add another column in which we calculate the value of
Kp
for each of the data points. Table 14.2: Equilibrium Partial Pressures in Decomposition Reaction makes it clear that the "constant" in (14.7) truly is independent of both the initial conditions and the equilibrium partial pressure of either one of the reactant or product. We thus refer to the constant
Kp
in (14.7) as the
Figure 14.2
144
Figure 14.3
PN 2 O 4
0.0710 0.166 0.267 0.371 0.478 0.586 0.695 0.805 0.916 1.027
(atm)
PN O 2
0.0336 0.102 0.156 0.198 0.234 0.266 0.294 0.320 0.345 0.368 0.389
(atm)
Kp
0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.148
0.00764
Table 14.2
It is very interesting to note the functional form of the equilibrium constant. The product the balanced chemical equation. The reactant
N O2
pressure
appears in the numerator, and the exponent 2 on the pressure is the stoichiometric coecient on
N O2
in
N2 O4
N2 O4
145
We now investigate whether other reactions have equilibrium constants and whether the form of this equilibrium constant is a happy coincidence or a general observation. synthesis of ammonia (14.2). In a previous section (Section 14.2: Goals), we considered only the equilibrium produced when 1 mole of We return to the reaction for the
N2
H2 .
the resultant equilibrium partial pressures given in Table 14.3: Equilibrium Partial Pressures of the Synthesis of Ammonia. In addition, anticipating the possibility of an equilibrium constant, we have calculated the ratio of partial pressures given by:
Kp =
PN H 3 2 PN 2 PH 2 3
(14.8)
In Table 14.3: Equilibrium Partial Pressures of the Synthesis of Ammonia, the equilibrium partial pressures of the gases are in a very wide variety, including whether the nal pressures are greater for reactants or products. However, from the data in Table 14.3: Equilibrium Partial Pressures of the Synthesis of Ammonia, it is clear that, despite these variations, examined and is thus the
Kp
nN2
1 0.1 0.1 3 1 1.5
n H2
3 0.3 0.3 3 3 1.5
PN2
0.0342 0.0107 0.00323 0.492 0.0107 0.0255
PH 2
0.1027 0.0322 0.00968 0.00880 0.0322 0.00315
PN H 3
4.82 0.467 0.0425 0.483 0.467 0.0223
Kp 6.2 105 6.0 105 6.1 105 6.1 105 6.0 105 6.2 105
Table 14.3
Studies of many chemical reactions of gases result in the same observations. Each reaction equilibrium can be described by an equilibrium constant in which the partial pressures of the products, each raised to their corresponding stoichiometric coecient, are multiplied together in the numerator, and the partial pressures of the reactants, each raised to their corresponding stoichiometric coecient, are multiplied together in the denominator. For historical reasons, this general observation is sometimes referred to as the
Action.
Law of Mass
Kp
for this reaction in Table 14.4: Equilibrium Constant for the Synthesis of HI.
146
Kp 6.25 103 8.81 103 1.49 102 1.84 102 1.98 102
Table 14.4
Note that the equilibrium constant increases dramatically with temperature. As a result, at equilibrium, the pressure of
HI
These data do not seem to have a simple relationship between should vary with temperature according to the following equation:
Kp
to arguments based on Thermodynamics, from which it is possible to show that the equilibrium constant
ln (Kp ) =
If
H RT
S R
(14.9)
and
do not depend strongly on the temperature, then this equation would predict a simple
H 1 straight line relationship between ln (Kp ) and . We T . In addition, the slope of this line should be R test this possibility with the graph in Figure 14.4 (Inverse of Temperature vs. Natural Log of Equilibrium
Constant).
147
Figure 14.4
In fact, we do observe a straight line through the data. In this case, the line has a negative slope. Note carefully that this means that
Kp
is
kJ must be negative, and indeed for this reaction (14.3) in this temperature range, H = 15.6 mol . R This value matches well with the slope of the line in Figure 14.4 (Inverse of Temperature vs. Natural Log of
Equilibrium Constant). Given the validity of (14.9) in describing the temperature dependence of the equilibrium constant, we
< 0 should have a positive slope in the graph 1 , and thus the equilibrium constant should with increasing temperature. A T kJ = 99.2 mol . good example of an exothermic reaction is the synthesis of ammonia (14.2) for which H
can also predict that an exothermic reaction with of
ln (Kp )
versus
decrease
Equilibrium constant data are given in Table 14.5: Equilibrium Constant for the Synthesis of Ammonia. Note that, as predicted, the equilibrium constant for this exothermic reaction decreases rapidly with increasing temperature. The data from Table 14.5: Equilibrium Constant for the Synthesis of Ammonia is shown in Figure 14.5 (Inverse of Temperature vs. Natural Log of Equilibrium Constant), clearly showing the contrast between the endothermic reaction and the exothermic reaction. The slope of the graph is positive for the exothermic reaction and negative for the endothermic reaction. From (14.9), this is a general result for all reactions.
148
Table 14.5
Figure 14.5
149
the alternative, if there are unwanted by-products of a reaction, we might want conditions which minimize the product. We have observed that the amount of product varies with the quantities of initial materials and with changes in the temperature. Our goal is a systematic understanding of these variations. A look back at Table 14.1: Equilibrium Partial Pressures in Decomposition Reaction and Table 14.2: Equilibrium Partial Pressures in Decomposition Reaction shows that the equilibrium pressure of the product of the reaction increases with increasing the initial quantity of reaction. This seems quite intuitive. Less intuitive is the variation of the equilibrium pressure of the product of this reaction (14.2) with variation in the volume of the container, as shown in Table 14.3: Equilibrium Partial Pressures of the Synthesis of Ammonia. Note that the pressure of occurs in a larger volume. To understand this eect, we rewrite the equilibrium constant in (14.8) to explicit show the volume of the container. This is done by applying is given by the Ideal Gas Law:
N H3
factor of ten. This means that, at equilibrium, there are fewer moles of
N H3
nH2 3 ( RT ) V
2 3
nN H 3 nN2 nH2
(14.10)
RT V
Therefore,
Kp
RT V
nN H 3 2 nN2 nH2 3
(14.11)
This form of the equation makes it clear that, when the volume increases, the left side of the equation decreases. This means that the right side of the equation must decrease also, and in turn,
nN H 3
must
decrease while
nN2
and
nH2 must
the volume increases for this reaction (14.2). The eect of changing the volume must be considered for each specic reaction, because the eect depends on the stoichiometry of the reaction. One way to determine the consequence of a change in volume is to rewrite the equilibrium constant as we have done in (14.11). Finally, we consider changes in temperature. We note that and decreases with
Kp
increases with
for exothermic reactions. As such, the products are increasingly favored with increasing
temperature when the reaction is endothermic, and the reactants are increasingly favored with increasing temperature when the reaction is exothermic. On reection, we note that when the reaction is exothermic, the reverse reaction is endothermic. Putting these statements together, we can say that the reaction equilibrium always shifts in the direction of the endothermic reaction when the temperature is increased. All of these observations can be collected into a single unifying concept known as
Le Chtelier's
Le Chtelier's Principle
When a reaction at equilibrium is stressed by a change in conditions, the equilibrium will be reestablished in such a way as to counter the stress. This statement is best understood by reection on the types of "stresses" we have considered in this section. When a reactant is added to a system at equilibrium, the reaction responds by consuming some of that added reactant as it establishes a new equilibrium. This osets some of the stress of the increase in reactant. When the temperature is raised for a reaction at equilibrium, this adds thermal energy. The system shifts the equilibrium in the endothermic direction, thus absorbing some of the added thermal energy, countering the stress. The most challenging of the three types of stress considered in this section is the change in volume. By increasing the volume containing a gas phase reaction at equilibrium, we reduce the partial pressures of all gases present and thus reduce the total pressure. Recall that the response of this reaction (14.2) to the volume increase was to create more of the reactants at the expense of the products. One consequence of this
150
shift is that more gas molecules are created, and this increases the total pressure in the reaction ask. Thus, the reaction responds to the stress of the volume increase by partially osetting the pressure decrease with an increase in the number of moles of gas at equilibrium. Le Chtelier's principle is a useful mnemonic for predicting how we might increase or decrease the amount of product at equilibrium by changing the conditions of the reaction. From this principle, we can predict whether the reaction should occur at high temperature or low temperature, and whether it should occur at high pressure or low pressure.
151
Exercise 14.2
i.e.
For this reaction (14.4) the number of moles of volume in which the reaction is contained. dierently by changes in the volume.
N O2
equilibrium, give a reason why the rates of the forward and reverse reactions might be aected
Exercise 14.3
(14.12)
Write the form of the equilibrium constant for the reaction balanced as in (14.12). What is the value of the equilibrium constant? (Refer to Table 14.3: Equilibrium Partial Pressures of the Synthesis of Ammonia.) Of course, the pressures at equilibrium do not depend on whether the reaction Explain why this is true, even though the equilibrium is balanced as in (14.2) or as in (14.12).
Exercise 14.4
nN 2 V , instead of the partial pressures. In this form, we call the equilibrium constant Kc . Find the relationship between Kp and Kc , and calculate
the concentrations or particle densities, the value of
Kp
e.g. [N2 ] =
Exercise 14.5
Kc .
For each of these reactions, predict whether increases in temperature will shift the reaction equilibrium more towards products or more towards reactants.
14.7.1
Exercise 14.6
Plot the data in Table 14.4: Equilibrium Constant for the Synthesis of HI on a graph showing on the y-axis and
on the x-axis. The shape of this graph is reminiscent of the graph of another
physical property as a function of increasing temperature. Identify that property, and suggest a reason why the shapes of the graphs might be similar.
Exercise 14.7
Using Le Chtelier's principle, predict whether the specied "stress" will produce an increase or a decrease in the amount of product observed at equilibrium for the reaction:
(14.13)
152
= 91
14.7.1
Volume of container is increased.
14.7.2
Helium is added to container.
14.7.3
Temperature of container is raised.
14.7.4
Hydrogen is added to container.
14.7.5
CH3 OH
Chapter 15
Acid-Base Equilibrium
1
15.1 Foundation
We have developed an understanding of equilibrium constants, and
equilibrium
involving phase transitions and involving reactions To understand application of these principles to
entirely in the gas phase. We will assume an understanding of the principles of dynamic equilibrium, reaction
Le Chtelier's Principle.
reactions in solution, we will now assume a denition of certain classes of substances as being either acids or bases. An acid is a substance whose molecules donate positive hydrogen ions (protons) to other molecules or ions. When dissolved in pure water, acid molecules will transfer a hydrogen ion to a water molecule This increases the concentration of or to a cluster of several water molecules.
H+
A base is a substance whose molecules accept hydrogen ions from other molecules. concentration of
pure water, base molecules will accept a hydrogen ion from a water molecule, leaving behind an increased
OH
15.2 Goals
Acids and bases are very common substances whose properties vary greatly. Many acids are known to be quite corrosive, with the ability to dissolve solid metals or burn esh. Many other acids, however, are not only benign but vital to the processes of life. Far from destroying biological molecules, they carry out reactions critical for organisms. Similarly, many bases are caustic cleansers while many others are medications to calm indigestion pains. In this concept study, we will develop an understanding of the characteristics of molecules which make them either acids or bases. We will examine measurements about the relative strengths of acids and bases, and we will use these to develop a quantitative understanding of the relative strengths of acids and bases. From this, we can develop a qualitative understanding of the properties of molecules which determine whether a molecule is a strong acid or a weak acid, a strong base or a weak base. This understanding is valuable in predicting the outcomes of reactions, based on the relative quantitative strengths of acids and bases. These reactions are commonly referred to as neutralization reactions. molecules. A surprisingly large number of reactions, particularly in organic chemistry, can be understood as transfer of hydrogen ions from acid molecules to base
1 This
154
HA,
representing
the hydrogen ion which will be donated and the rest of the molecule which will remain as a negative ion after the donation. The typical reaction of an acid in aqueous solution reacting with water can be written as
(15.1)
to indicate that the donated proton has been dissolved in solution. Observations indicate that the proton is associated with several water molecules in a cluster, rather than attached to a single molecule. simplied notation to represent this result. Similarly, the (15.1) is referred to as
HA in water should produce H3 O+ ions in solution with + + a concentration of 0.1M. In fact, the concentration of H3 O ions, [H3 O ], can be measured by a variety of + techniques. Chemists commonly use a measure of the H3 O ion concentration called the pH, dened by:
(15.1) implies that a 0.1M solution of the acid
acid ionization.
pH = log H3 O+
We now observe the concentration
[H3 O+ ]
concentration of 0.1M, and the results are tabulated in Table 15.1: H3O+ pH for 0.1M Acid Solutions.
[H3 O+ ]
0.1 0.1 0.1 0.1 0.1 0.1 0.1
(M) pH
1 1 1 1 1 1 1
6.2 10 7 10 1 10
6 6
acids, the acid ionization is complete: essentially every acid molecule is ionized in the solution according to (15.1). However, there are other acids listed for which is considerably less than 0.1M and the pH is considerably greater than 1. For each of these acids, therefore, not all of the acid molecules ionize according
155
to (15.1). In fact, it is clear in Table 15.1: H3O+ pH for 0.1M Acid Solutions that in these acids the vast majority of the acid molecules do not ionize, and only a small percentage does ionize. From these observations, we distinguish two classes of acids:
strong acids
and
weak acids.
Strong
acids are those for which nearly 100% of the acid molecules ionize, whereas weak acids are those for which only a small percentage of molecules ionize. There are seven strong acids listed in Table 15.1: H3O+ pH for 0.1M Acid Solutions. From many observations, it is possible to determine that these seven acids are the only commonly observed strong acids. The vast majority of all substances with acidic properties are weak acids. We seek to characterize weak acid ionization quantitatively and to determine what the dierences in molecular properties are between strong acids and weak acids.
[H3 O+ ] 6.2 10 7 10 1 10
(M) % ionization
3
6.2% 0.007% 0.001% 5.5% 5.5% 28.2% 1.3% 1.1%
6 6
Table 15.2
We might be tempted to conclude from Table 15.2: Percent Ionization of 0.1M Acid Solutions that we can characterize the strength of each acid by the percent ionization of acid molecules in solution. However, before doing so, we observe the pH of a single acid, nitrous acid, in solution as a function of the concentration of the acid.
(15.2)
In this case, "concentration of the acid" refers to the number of moles of acid that we dissolved per liter of water. Our observations are listed in Table 15.3: % Ionization of Nitrous Acid, which gives and percent ionization as a function of nitrous acid concentration.
[H3 O+ ],
pH,
156
(M)
pH % Ionization
1.8 2.0 2.2 2.3 2.5 2.7 2.9 3.3 3.5 3.3% 5.1% 7.0% 9.7% 14.7% 20.0% 26.7% 49.1% 60.8%
4.8 103
3 3 3 4
3.0 104
Table 15.3
Surprisingly, perhaps, the percent ionization varies considerably as a function of the concentration of the nitrous acid. We recall that this means that the fraction of molecules which ionize, according to (15.2), depends on how many acid molecules there are per liter of solution. Since some but not all of the acid molecules are ionized, this means that nitrous acid molecules are present in solution at the same time as the negative nitrite ions and the positive hydrogen ions. Recalling our observation of equilibrium in gas phase reactions, we can conclude that (15.2) achieves equilibrium for each concentration of the nitrous acid. Since we know that gas phase reactions come to equilibrium under conditions determined by the equilibrium constant, we might speculate that the same is true of reactions in aqueous solution, including acid ionization. We therefore dene an analogy to the gas phase reaction equilibrium constant. In this case, we would not be interested in the pressures of the components, since the reactants and products are all in solution. Instead, we try a function composed of the equilibrium concentrations:
K=
(15.3)
The concentrations at equilibrium can be calculated from the data in Table 15.3: % Ionization of Nitrous Acid for nitrous acid.
Furthermore, if
c0
acid dened by the number of moles of acid dissolved in solution per liter of solution, then Note that the contribution of
[HA] = c0 [H3 O+ ].
nH 2 O = 55.5M , which is V not aected by the presence or absence of solute. All of the relevant concentrations, along with the function
the "concentration" of water in the solution is simply the molar density of water, in (15.3) are calculated and tabulated in Table 15.4: Equilibrium Concentrations and K for Nitrous Acid.
[H2 O (l)]
157
(M)
[H3 O+ ] 1.7 10
2
N O2
[HN O2 ]
2
0.48 0.19
K 1.0 105 9.9 106 9.6 106 9.4 106 9.4 106 8.9 106 8.8 106 8.5 106 8.5 106
1.7 10
1.0 102 7.0 103 4.8 103 2.9 103 2.0 103 1.3 103 4.9 104 3.0 104
1.0 102 7.0 103 4.8 103 2.9 103 2.0 103 1.3 103 4.9 104 3.0 104
Table 15.4
9.3 102 4.5 102 4.5 102 8.0 103 3.6 103 5.1 104 2.0 104
K K
in (15.3) is approximately, though only approximately, the same for all of only 10% to 15%. Hence, we can regard the function
conditions analyzed in Table 15.3: % Ionization of Nitrous Acid. Variation of the concentration by a factor
as a constant
which approximately describes the acid ionization equilibrium for nitrous acid.
By convention, chemists
omit the constant concentration of water from the equilibrium expression, resulting in the
acid ionization
(15.4)
Ka =
[H3 O+ ] N O2 [HN O2 ]
From an average of the data in Table 15.4: Equilibrium Concentrations and K for Nitrous Acid, we can calculate that, at 25 C for nitrous acid, Constants, Ka and pKa.
Ka = 5 104 .
in Table 15.2: Percent Ionization of 0.1M Acid Solutions are listed in Table 15.5: Weak Acid Ionization
Ka 5 10
4 10 11 4 4
pKa
3.3 9.3 10.6 3.4 3.4 2.0 4.8 4.9
1.1 102
5 5
We make two nal notes about the results in Table 15.5: Weak Acid Ionization Constants, Ka and pKa. First, it is clear the larger the value of
Ka ,
Ka
is a larger number,
158
the percent ionization of the acid is larger, and vice versa. Second, the values of of magnitude. As such, it is often convenient to dene the quanity comparing acid strengths:
pKa ,
pKa = logKa
The value of
(15.5)
pKa
for each acid is also listed in Table 15.5: Weak Acid Ionization Constants, Ka and pKa. and
pKa . Ka
pKa implies a large value of Ka and pKa thus give a simple quantitative
thus a stronger acid. Weaker acids have comparison of the strength of weak acids.
[H3 O+ ]
pH = 7,
so that
1.0 10
[H3 O+ ] =
M.
There can be only one possible source for these ions: water molecules. The process
(15.6)
autoionization of water.
Note that, in this reaction, some water molecules behave as it must also be true that
acid, donating protons, while other water molecules behave as base, accepting protons. Since at equilibrium
We can
write the equilibrium constant for (15.6), following our previous convention of omitting the pure water from the expression, and we nd that, at 25 C,
Kw
= =
(15.7)
(In this case, the subscript "w" refers to "water".) (15.6) occurs in pure water but must also occur when ions are dissolved in aqueous solutions. Measurements show that, in this solution This includes the presence of acids ionized in solution. For example, we consider a solution of 0.1M acetic acid.
[H3 O+ ] = 1.3 103 M and [OH ] = 7.7 1012 M . We note two things from this observation: rst, the value of [OH ] is considerably less than in pure water; second, the 14 autoionization equilibrium constant remains the same at 1.010 . From these notes, we can conclude that
the autoionization equilibrium of water occurs in acid solution, but the extent of autoionization is suppressed by the presence of the acid in solution. We consider a nal note on the autoionization of water. The pH of pure water is 7 at 25 C. Adding any acid to pure water, no matter how weak the acid, must increase pH less than 7 is acidic.
[H3 O ],
such, we can conclude that, for all acid solutions, pH is less than 7, or on the other hand, any solution with
N H3 .
(15.8)
159
Due to the lone pair of electrons on the highly electronegative N atom, free hydrogen ion forming the ammonium ion initial concentration of
N H3
+ N H4 .
OH
for various
N H3
in water, we observe the results in Table 15.6: Equilibrium Concentrations and Equilibrium Concentrations and Kb for
Kb for Ammonia. We should anticipate that a base ionization equilibrium constant might exist comparable to the acid ionization equilibrium constant, and in Table 15.6: Ammonia, we have also calculated the value of the function
Kb
dened as:
Kb =
+ N H4 [OH ] [N H3 ]
(15.9)
(M)
pH
11.5 11.3 11.1 11.0 10.8 10.6 10.5 10.1 9.9
4.2 104
4 4 5
1.9 105
5 5 5
Table 15.6
Given that we have dissolved a base in pure water, we might be surprised to discover the presence of positive hydrogen ions,
H3 O+ ,
small amounts. The pH for each solution is also listed in Table 15.6: Equilibrium Concentrations and Kb for Ammonia. The source of these
H3 O +
H3 O+
of the base in solution has suppressed the autoionization. Because of this, in each case the pH of a basic Base ionization is therefore quite analogous to acid ionization observed earlier. We now consider a
comparison of the strength of an acid to the strength of a base. To do so, we consider a class of reactions called "neutralization reactions" which occur when we mix an acid solution with a base solution. Since the acid donates protons and the base accepts protons, we might expect, when mixing acid and base, to achieve a solution which is no longer acidic or basic. For example, if we mix together equal volumes of 0.1M and 0.1M
HCl (aq)
N aOH (aq),
(15.10)
N aCl
acidic nor basic properties, and the pH is 7; hence the acid and base have neutralized each other. In this case, we have mixed together a strong acid with a strong base. Since both are strong and since we mixed equal molar quantities of each, the neutralization reaction is essentially complete. We next consider mixing together a weak acid solution with a strong base solution, again with equal molar quantities of acid and base. As an example, we mix 100ml of 0.1M acetic acid (HA) solution with
160
100ml of 0.1M sodium hydroxide. In this discussion, we will abbreviate the acetic acid molecular formula
CH3 COOH
as
HA
as
The reaction of
HA
and
N aOH
is: (15.11)
is the acetate ion in solution, formed when an acetic acid molecule donates the positive hydrogen
ion. We have thus created a salt solution again, in this case of sodium acetate in water. Note that the volume of the combined solution is 200ml, so the concentration of sodium acetate (N aA) in solution is 0.050M. Unlike our previous
N aCl
salt solution, a measurement in this case reveals that the pH of the product In essence, the weak acid does not fully neutralize the strong base. To
salt solution is 9.4, so the solution is basic. Thus, mixing equal molar quantities of strong base with weak acid produces a basic solution. then there is an excess of understand this, we examine the behavior of sodium acetate in solution. Since the pH is greater than 7,
OH
ions in solution relative to pure water. These ions must have come from the
reaction of sodium acetate with the water. Therefore, the negative acetate ions in solution must behave as a base, accepting positive hydrogen ions:
(15.12)
hydrolysis.
From this example, the salt of a weak acid behaves as a base in water, resulting in a pH greater than 7. To understand the extent to which the hydrolysis of the negative ion occurs, we need to know the equilibrium constant for this reaction. This turns out to be determined by the acid ionization constant for
HA.
as
Kh =
Multiplying numerator and denominator by
[HA] [OH ] [A ]
we nd that
(15.13)
[H3 O+ ], = =
Kh
(15.14)
Therefore, for the hydrolysis of acetate ions in solution, ion is a very weak base.
Kh = 5.81010 .
binary acids:
HF ; HCl; HBr; HI .
H2 SO4
161
Figure 15.1
We consider rst the simple binary acids. weak acid. pKa, we note that the acid strength increases
HCl, HBr, and HI are all strong acids, whereas HF is a pKa values in Table 15.7: H-X Bond Strengths and in the order HF < HCl < HBr < HI . This means that the
hydrogen ion can more readily separate from the covalent bond with the halogen atom (X) as we move down the periodic table. This is reasonable, because the strength of the H-X bond also decreases as we move down the periodic table, as shown in Table 15.7: H-X Bond Strengths and pKa.
The decreasing strength of the H-X bond is primarily due to the increase is the size of the X atom as we move down the periodic table. We conclude that one factor which inuences acidity is the strength of the H-X bond: a weaker bond produces a stronger acid, and vice versa. In the acids in the other two categories, the hydrogen atom which ionizes is attached directly to an oxygen atom. Thus, to understand acidity in these molecules, we must examine what the oxygen atom is in turn bonded to. It is very interesting to note that, in examining compounds like R-O-H, where R is an atom or group of atoms, we can get either acidic or basic properties. For examples,
N aOH
HOCl is a weak acid. This means that, when N aOH ionizes when HOCl ionizes in solution, the H-O bond ionizes.
The for
HOI , HOBr, and HOCl. pKa 's for these acids are found experimentally to be, respectively, 10.6, 8.6, and 7.5. The acid strength HOX increases as we move up the periodic table in the halogen group. This means that the H-O bond
ionizes more readily when the oxygen atom is bonded to a more electronegative atom. We can add to this observation by comparing the strengths of the acids HOCl, HOClO , HOClO2 , and HOClO3 . (Note that the molecular formulae are more commonly written as HClO, HClO2 , HClO3 , and HClO4 . We have written them instead to emphasize the molecular structure.) The pKa 's of these acids are, respectively, 7.5, 2.0, -2.7, and -8.0. In each case, the molecule with more oxygen atoms on the central Cl atom is the stronger acid:
HOClO
HOCl, etc.
162
HON O,
nitrous acid, is
a weak acid. Since oxygen atoms are very strongly electronegative, these trends add to our observation that increasing electronegativity of the attached atoms increases the ionization of the O-H bond. Why would electronegativity play a role in acid strength? There are two conclusions we might draw. First, a greater electronegativity of the atom or atoms attached to the H-O in the oxyacid apparently results in a weaker H-O bond, which is thus more readily ionized. We know that an electronegative atom polarizes bonds by drawing the electrons in the molecule towards it. In this case, the Cl in
HOCl
and the Br in
polarize the H-O bond, weakening it and facilitating the ionization of the hydrogen. In comparing
HOClO,
the added oxygen atom must increase the polarization of the H-O bond, thus weakening the bond
further and increasing the extent of ionization. A second conclusion has to do with the ion created by the acid ionization. The negative ion produced has a surplus electron, and the relative energy of this ion will depend on how readily that extra electron is attracted to the atoms of ion. The more electronegative those atoms are, the stronger is the attraction. Therefore, the the
OCl
ion can more readily accommodate the negative charge than can the
OBr
OClO
ion can more readily accommodate the negative charge than can the
OCl
ion. And
ion.
We conclude that the presence of strongly electronegative atoms in an acid increases the polarization of the H-O bond, thus facilitating ionization of the acid, and increases the attraction of the extra electron to the negative ion, thus stabilizing the negative ion. Both of these factors increase the acid strength. Chemists commonly use both of these conclusions in understanding and predicting relative acid strength. The relative acidity of carbon compounds is a major subject of organic chemistry, which we can only visit briey here. In each of the carboxylic acids, the H-O group is attached to a carbonyl C=O group, which is in turn bonded to other atoms. The comparison we observe here is between carboxylic acid molecules, denoted as
RCOOH , and other organic molecules containing the H-O group, such as alcohols denoted as ROH .
(R is
simply an atom or group of atoms attached to the functional group.) The former are obviously acids whereas the latter group contains molecules which are generally extremely weak acids. One interesting comparison is for the acid and alcohol when R is the benzene ring, whereas phenol,
C6 H5 .
Benzoic acid,
C6 H5 COOH ,
has
pKa = 4.2,
C6 H5 OH ,
has
pKa = 9.9.
carbon atom adjacent to the O-H clearly increases the acidity of the molecule, and thus increases ionization of the O-H bond. This observation is quite reasonable in the context of our previous conclusion. Adding an electronegative oxygen atom in near proximity to the O-H bond both increases the polarization of the O-H bond and stabilizes the negative ion produced by the acid ionization. carboxylate anions, In addition to the electronegativity eect,
RCOO ,
Figure 15.2
The resonance results in a sharing of the negative charge over several atoms, thus stabilizing the negative ion. This is a major contributing factor in the acidity of carboxylic acids versus alcohols.
163
Exercise 15.2
plot
Ka ?
Using the data in Table 15.4: Equilibrium Concentrations and K for Nitrous Acid for nitrous acid,
[H3 O+ ]
versus
c0 ,
the initial concentration of the acid, and versus On a second graph, plot
[HN O2 ]
the equilibrium
[H3 O+ ]
versus
c0 ,
[HN O2 ]
gives a straight line? Using the equilibrium constant expression, explain your answer.
Using Le Chtelier's principle, explain why the concentration of solution than it is in neutral solution.
[OH ]
We considered mixing a strong base with a weak acid, but we did not consider mixing a strong acid with a weak acid. Consider mixing 0.1M principle.
HN O3
and 0.1M
HN O2 .
Exercise 15.5
Imagine taking a 0.5M solution of nitrous acid and slowing adding water to it. Looking at Table 15.3: % Ionization of Nitrous Acid, we see that, as the concentration of nitrous acid decreases, the percent ionization increases. By contrast, Chtelier's principle.
[H3 O+ ]
Exercise 15.6
We observed that mixing a strong acid and a strong base, in equal amounts and concentrations, produces a neutral solution, and that mixing a strong base with a weak acid, in equal amounts and concentrations, produces a basic solution. Imagine mixing a weak acid and a weak base, in equal amounts and concentrations. Predict whether the resulting solution will be acidic, basic, or neutral, and explain your prediction.
Exercise 15.7
Using the electronegativity arguments presented above (Section 15.7: Observation 5: Acid strength and molecular properties), explain why, in general, compounds like M-O-H are bases rather than acids, when M is a metal atom. Predict the relationship between the properties of the metal atom M and the strength of the base
Exercise 15.8
M OH .
Exercise 15.9
H2 SO4 produces HSO4 , which is also an acid. However, HSO4 is a than H2 SO4 . Using the conclusions from above (Section 15.7: Observation 5: molecular properties), explain why HSO4 is a much weaker acid.
H2 S
and
HCl.
Exercise 15.10
H3 P O4
and
H3 AsO4 .
Using arguments from above (Section 15.7: Observation 5: Acid strength and molecular properties), predict and explain the relative acidity of phenol (Figure 15.3(a): Phenol) and methanol (Figure 15.3(b): Methanol).
164
(a) Phenol
(b) Methanol
Figure 15.3
Chapter 16
Reaction Rates
1
16.1 Foundation
We will assume an understanding of the postulates of the
of chemical reactions. We will also assume an understanding of phase equilibrium and reaction equilibrium, including the temperature dependence of equilibrium constants.
16.2 Goals
We have carefully examined the observation that chemical reactions come to equilibrium. Depending on the reaction, the equilibrium conditions can be such that there is a mixture of reactants and products, or virtually all products, or virtually all reactants. We have not considered the time scale for the reaction to achieve these conditions, however. In many cases, the speed of the reaction might be of more interest than the nal equilibrium conditions of the reaction. Some reactions proceed so slowly towards equilibrium as to appear not to occur at all. For example, metallic iron will eventually oxidize in the presence of aqueous salt solutions, but the time is suciently long for this process that we can reasonably expect to build a boat out of iron. On the other hand, some reactions may be so rapid as to pose a hazard. For example, hydrogen gas will react with oxygen gas so rapidly as to cause an explosion. In addition, the time scale for a reaction can depend very strongly on the amounts of reactants and their temperature. In this concept development study, we seek an understanding of the rates of chemical reactions. We will dene and measure reaction rates and develop a quantitative analysis of the dependence of the reaction rates on the conditions of the reaction, including concentration of reactants and temperature. This quantitative analysis will provide us insight into the process of a chemical reaction and thus lead us to develop a model to provide an understanding of the signicance of reactant concentration and temperature. We will nd that many reactions proceed quite simply, with reactant molecules colliding and exchanging atoms. In other cases, we will nd that the process of reaction can be quite complicated, involving many molecular collisions and rearrangements leading from reactant molecules to product molecules. The rate of the chemical reaction is determined by these steps.
C60
is
C60 O3 ,
1 This
166
Oxidized Buckminsterfullerene
Figure 16.1
C60 O3
is prepared from
C60
0 C
solution is warmed,
C60 O3
decomposes, releasing
O2
and creating
C60 O
to completion. We can actually watch this process happen in time by measuring the amount of light of a specic frequency absorbed by the
C60 O3
absorbance.
167
C60 O3
is essentially the same as observing the concentration as a function of time. One such set of data is given in Table 16.1: Oxidized Buckminsterfullerene Absorbance during Thermal Decomposition at 23 C, and is shown in the graph in Figure 16.2 (Oxidized Buckminsterfullerene Absorbance).
C60 O3
absorbance
0.04241 0.03634 0.03121 0.02680 0.02311 0.01992 0.01721 0.01484 0.01286 0.01106 0.00955 0.00827 0.00710 0.00616 0.00534 0.00461 0.00395
Table 16.1
168
Figure 16.2
The rate at which the decomposition reaction is occurring is clearly related to the rate of change of the concentration
[C60 O3 ],
which is proportional to the slope of the graph in Figure 16.2 (Oxidized Buckmin-
Rate =
d [C60 O3 ] dt
([C60 O3 ]) (t)
(16.1)
We want the rate of reaction to be positive, since the reaction is proceeding forward. However, because we are measuring the rate of disappearance of the reactant in this case, that rate is negative. We include a negative sign in this denition of rate so that the rate in (16.1) is a positive number. Note also that the slope of the graph in Figure 16.2 (Oxidized Buckminsterfullerene Absorbance) should be taken as the derivative of the graph, since the graph is not a straight line. We will approximate that derivative by estimating the slope at each time in the data, taking the change in the absorbance of the
C60 O3
time at each time step. The rate, calculated in this way, is plotted as a function of time in Figure 16.3 (Rate
169
of Decomposition).
Rate of Decomposition
Figure 16.3
It is clear that the slope of the graph in Figure 16.2 (Oxidized Buckminsterfullerene Absorbance) changes over the course of time. Correspondingly, Figure 16.3 (Rate of Decomposition) shows that the rate of the reaction decreases as the reaction proceeds. The reaction is at rst very fast but then slows considerably as the reactant
C60 O3
is depleted.
The shape of the graph for rate versus time (Figure 16.3 (Rate of Decomposition)) is very similar to the shape of the graph for concentration versus time (Figure 16.2 (Oxidized Buckminsterfullerene Absorbance)). This suggests that the rate of the reaction is related to the concentration of Figure 16.3 (Rate of Decomposition), versus the absorbance of the
C60 O3
in Figure 16.4 (Rate versus Concentration), we plot the rate of the reaction, dened in (16.1) and shown in
C60 O3 .
170
Figure 16.4
We nd that there is a very simple proportional relationship between the rate of the reaction and the concentration of the reactant. Therefore, we can write
Rate
d[C60 O3 ] dt
= k [C60 O3 ]
where
(16.2)
is a proportionality constant.
[C60 O3 ]
is
rate law,
C60 O3
expressing the relationship between the rate of a reaction and the concentrations
of the reactant or reactants. Rate laws are expressions of the relationship between experimentally observed rates and concentrations. As a second example of a reaction rate, we consider the dimerization reaction of butadiene gas,
CH2 =CH -
CH =CH2 .
Two butadiene molecules can combine to form vinylcyclohexene, shown in Figure 16.5 (Dimer-
171
Figure 16.5
Table 16.2: Dimerization of Butadiene at 250 C provides experimental data on the gas phase concentration of butadiene
[C4 H6 ]
as a function of time at
T = 250 C .
[C4 H6 ]
0.0917 0.0870 0.0827 0.0788 0.0753 0.0720 0.0691 0.0664 0.0638
Rate [C4 H6 ]
Rate [C4 H6 ]2
1.03 104 9.84 105 9.37 105 8.95 105 8.57 105 8.22 105 7.90 105 7.60 105 7.32 105
1.13 103 1.13 103 1.13 103 1.14 103 1.14 103 1.14 103 1.14 103 1.14 103 1.15 103
We can estimate the rate of reaction at each time step as in (16.1), and these data are presented in Table 16.2: Dimerization of Butadiene at 250 C as well. Again we see that the rate of reaction decreases as the concentration of butadiene decreases. This suggests that the rate is given by an expression like (16.2). To
Rate [C4 H6 ] in Table 16.2: Dimerization of Butadiene at 250 C for each time step. We note that this is a constant, so (16.2) does not describe the relationship between the rate of reaction and the Rate concentration of butadiene. Instead we calculate in Table 16.2: Dimerization of Butadiene at 250 C. [C4 H6 ]2 We discover that this ratio is a constant throughout the reaction. Therefore, the relationship between the
test this, we calculate
not
rate of the reaction and the concentration of the reactant in this case is given by
Rate
4 d[CdtH6 ]
= k[C4 H6 ]
(16.3)
which is the rate law for the reaction in Figure 16.5 (Dimerization of Butadiene to Vinylcyclohexene). This is a very interesting result when compared to (16.2). In both cases, the results demonstrate that the rate of
172
reaction depends on the concentration of the reactant. However, we now also know that the way in which the rate varies with the concentration depends on what the reaction is. Each reaction has its own rate law, observed experimentally.
second order reaction. There are third order reactions, and even zeroth order reactions whose rates do not depend on the amount
of the reactant. We need more observations of rate laws for dierent reactions. The approach used in the previous section (Section 16.3: Observation 1: Reaction Rates) to determine a reaction's rate law is fairly clumsy and at this point dicult to apply. We consider here a more systematic approach. First, consider the decomposition of
N2 O5 (g).
N2 O5
N2 O5
rst
N2 O5
N2 O5
decomposes. By comparing these rates, we can nd the order of the decomposition reaction. The
N2 O5 (g)
Rate = k[N2 O5 ]
so we need to determine the exponent
(16.4)
m. For example, at 25 C we observe that the rate of decomposition 3 M is 1.4 10 s when the concentration of N2 O5 is 0.020M . If instead we begin we [N2 O5 ] = 0.010M , we 4 M observe that the rate of decomposition is 7.0 10 s . We can compare the rate from the rst measurement Rate (1) to the rate from the second measurement Rate (2). From (16.4), we can write that
Rate(1) Rate(2)
= = =
(16.5)
2.0 = 2.0m
Clearly, then nd that
rate constant
m = 1, and the decomposition is a rst order reaction. We can also then nd k for this reaction by simply plugging in one of the initial rate measurements k = 0.070s1 .
This approach to nding reaction order is called the method of initial rates, since it relies on xing the concentration at specic initial values and measuring the initial rate associated with each concentration. So far we have considered only reactions which have a single reactant. Consider a second example of the method of initial rates involving the reaction of hydrogen gas and iodine gas:
(16.6)
In this case, we expect to nd that the rate of the reaction depends on the concentrations for both reactants. As such, we need more initial rate observations to determine the rate law. In Table 16.3: Hydrogen Gas and Iodine Gas Initial Rate Data at 700K, observations are reported for the initial rate for three sets of initial concentrations of
H2
and
I2 .
173
Hydrogen Gas and Iodine Gas Initial Rate Data at 700K Experiment
1 2 3
[H2 ]0
0.10 0.20 0.20
(M)
[I2 ]0
0.10 0.10 0.20
Table 16.3
N2 O 5
(16.7)
Rate(1) Rate(2)
= = =
k[H2 ]1 n [I2 ]1 m k[H2 ]2 n [I2 ]2 m 3.00104 M s 6.00104 M s m k(0.10M ) (0.10M )n k(0.20M )m (0.10M )n
(16.8)
This simplies to
m = 1.
n = 1.
(16.9)
Once we know the rate law, we can use any of the data from Table 16.3: Hydrogen Gas and Iodine Gas Initial Rate Data at 700K to determine the rate constant, simply by plugging in concentrations and rate into (16.9). We nd that
1 Ms . This procedure can be applied to any number of reactions. The challenge is preparing the initial conditions
A variety of reaction orders are
k = 3.00 102
and measuring the initial change in concentration precisely versus time. Table 16.4: Rate Laws for Various Reactions provides an overview of the rate laws for several reactions. observed, and they cannot be easily correlated with the stoichiometry of the reaction.
Rate Law
Rate = k[N O] [O2 ] Rate = k[N O] [H2 ] Rate = k [ICl] [H2 ] Rate = k [N2 O5 ] Rate = k [N O2 ] [F2 ] Rate = k [H2 O2 ] Rate = k [H2 ] [Br2 ] 2 Rate = k [O3 ] [Cl]
1
2 2
174
A products, Rate
= =
(16.10)
From Calculus, it is possible to use (16.10) to nd the function as a function of time. The result is
[A]
(16.11)
ln ([A]) = ln ([A]0 ) kt
(16.12) reveals that, if a reaction is rst order, we can plot slope equal to
ln ([A])
k .
Moreover, if we know the rate constant and the initial concentration, we can predict the
A has been consumed. We call this time the half life of the reaction and denote it as t 1 . At that time, 2 1 [A] = 2 [A]0 . From (16.12) and using the properties of logarithms, we nd that, for a rst order reaction t1 = 2 ln (2) k
(16.13)
An interesting point in the reaction is the time at which exactly half of the original concentration of
This equation tells us that the half-life of a rst order reaction does not depend on how much material we start with. It takes exactly the same amount of time for the reaction to proceed from all of the starting material to half of the starting material as it does to proceed from half of the starting material to one-fourth of the starting material. half-life in (16.13). These conclusions are only valid for rst order reactions. Consider then a second order reaction, such as the butadiene dimerization discussed above (p. 170). The general second order reaction the rate law In each case, we halve the remaining material in a time equal to the constant
A products
has
Rate
= =
d[A] dt k[A]
2
(16.14)
[A] (t)
1 [A] increases, so [A] decreases. (16.15) reveals that, for a reaction which is second 1 order in the reactant A, we can plot [A] as a function of time to get a straight line with slope equal to k . Again, if we know the rate constant and the initial concentration, we can nd the concentration [A] at any
increases,
time of interest during the reaction. The half-life of a second order reaction diers from the half-life of a rst order reaction. From (16.15), if we take
[A] = 1 [A]0 , 2
we get
t1 = 2
1 k[A]0
(16.16)
This shows that, unlike a rst order reaction, the half-life for a second order reaction depends on how much material we start with. From (16.16), the more concentrated the reactant is, the shorter the half-life.
175
e.g.
(16.9)? One possibility is that there is a slight dependence on However, this is insucient
temperature of the concentrations, since volumes do vary with temperature. reaction rate is primarily found in the rate constant,
to account for the dramatic changes in rate typically observed. Therefore, the temperature dependence of
k.
Consider for example the reaction of hydrogen gas with iodine gas at high temperatures, as given in (16.6). The rate constant of this reaction at each temperature can be found using the method of initial rates, as discussed above, and we nd in Table 16.5: Rate Constant for Hydrogen Gas and Iodine Gas that the rate constant increases dramatically as the temperature increases.
6.80 103 9.87 103 3.00 102 8.43 102 2.21 101 5.46 101
1.27
Table 16.5
As shown in Figure 16.6 (Rate Constant), the rate constant appears to increase exponentially with temperature. After a little experimentation with the data, we nd in Figure 16.7 (Rate Constant) that there is a simple linear relationship between
ln (k)
and
1 T.
176
Rate Constant
Figure 16.6
177
Rate Constant
Figure 16.7
From Figure 16.7 (Rate Constant), we can see that the data in Table 16.4: Reactions t the equation
ln (k) = a
where
1 +b T
(16.17)
and
are constant for this reaction. It turns out that, for our purposes, all reactions have rate
It is very important to note that the form of (16.17) and the appearance of Figure 16.7 (Rate Constant) are both the same as the equations and graphs for the temperature dependence of the equilibrium constant for an endothermic reaction. This suggests a model to account for the temperature dependence of the rate constant, based on the energetics of the reaction. In particular, it appears that the reaction rate is related to the amount of energy required for the reaction to occur. We will develop this further in the next section.
178
and
in (16.17). To by
We begin by asking why the reaction rate should depend on the concentration of the reactants. the molecules during the reaction. For example, a reaction important in the decomposition of ozone aerosols is
answer this, we consider a simple reaction between two molecules in which atoms are transferred between
O3
O3
molecule and a
Cl
particles to react, they must come into close proximity to one another so that an
In general, two molecules cannot trade atoms to produce new product molecules
unless they are close enough together for the atoms of the two molecules to interact. This requires a collision
O3
O3
O3
Cl
Cl
O3
molecule and a
Cl
atom
to be in close proximity to the same specic point at the same time is proportional to the It is important to remember that not all collisions between
[O3 ]
times
[Cl].
O3
molecules and
Cl
reaction. There are other factors to consider including how the molecules approach one another. The atoms may not be positioned properly to exchange between molecules, in which case the molecules will simply bounce o of one another without reacting. of the For example, if the
Cl
atom
O3
molecule, that
atom will not transfer. Another factor is energy associated with the reaction.
Clearly, though, a collision must occur for the reaction to occur, and therefore there rate of the reaction can be no faster than the rate of collisions between the reactant molecules. Therefore, we can say that, in a of
bimolecular reaction, where two molecules collide and react, the rate
[O3 ] [Cl],
and we observe this in the experimental
of the reaction will be proportional to the product of the concentrations of the reactants. For the reaction
O3
with
Cl,
rate law in Table 16.4: Rate Laws for Various Reactions. Thus, it appears that we can understand the rate law by understanding the collisions which must occur for the reaction to take place. We also need our model to account for the temperature dependence of the rate constant. As noted at the end of the last section (p. 177), the temperature dependence of the rate constant in (16.17) is the same as the temperature dependence of the equilibrium constant for an endothermic reaction. This suggests that the temperature dependence is due to an energetic factor required for the reaction to occur. However, we nd experimentally that (16.17) describes the rate constant temperature dependence regardless of whether the reaction is endothermic or exothermic. Therefore, whatever the energetic factor is that is required for the reaction to occur, it is not just the endothermicity of the reaction. It must be that all reactions, regardless of the overall change in energy, require energy to occur. A model to account for this is the concept of
activation energy.
some bonds in the reactant molecule must be broken, so that atoms can rearrange and new bonds can be created. At the time of collision, bonds are stretched and broken as new bonds are made. Breaking these bonds and rearranging the atoms during the collision requires the input of energy. The minimum amount of energy required for the reaction to occur is called the activation energy,
Ea .
(Reaction Energy), showing conceptually how the energy of the reactants varies as the reaction proceeds. In Figure 16.8(a) (Endothermic Reaction), the energy is low early in the reaction, when the molecules are
179
As the molecules approach and begin to rearrange, the energy rises sharply,
rising to a maximum in the middle of the reaction. This sharp rise in energy is the activation energy, as illustrated. After the middle of the reaction has passed and the molecules are arranged more as products than reactants, the energy begins to fall again. However, the energy does not fall to its original value, so this is an endothermic reaction. Figure 16.8(b) (Exothermic Reaction) shows the analogous situation for an exothermic reaction. Again, as the reactants approach one another, the energy rises as the atoms begin to rearrange. At the middle of the collision, the energy maximizes and then falls as the product molecules form. In an exothermic reaction, the product energy is lower than the reactant energy. Figure 16.8 (Reaction Energy) thus shows that an energy barrier must be surmounted for the reaction to occur, regardless of whether the energy of the products is greater than (Figure 16.8(a) (Endothermic Reaction)) or less than (Figure 16.8(b) (Exothermic Reaction)) the energy of the reactants. that as temperature increases the average energy of the molecules in a sample increases. barrier increases. This barrier Therefore, as accounts for the temperature dependence of the reaction rate. We know from the kinetic molecular theory temperature increases, the fraction of molecules with sucient energy to surmount the reaction activation
180
Reaction Energy
Although we will not show it here, kinetic molecular theory shows that the fraction of molecules with energy greater than
Ea
at temperature
is proportional to
e RT .
Ea
Ea RT Ea
k (T ) = Ae RT
where
is a proportionality constant. If we take the logarithm of both sides of (16.18), we nd that
ln (k (T )) =
Ea + ln (A) RT ln (k) Ea . R
(16.19) versus
This equation matches the experimentally observed (16.17). We recall that a graph of observed to be linear. Now we can see that the slope of that graph is equal to As a nal note on (16.19), the constant
1 T is
We have accounted
for the probability of collision between two molecules and we have accounted for the energetic requirement
181
for a successful reactive collision. We have not accounted for the probability that a collision will have the appropriate orientation of reactant molecules during the collision. Moreover, not every collision which occurs with proper orientation and sucient energy will actually result in a reaction. There are other random factors relating to the internal structure of each molecule at the instant of collision. The factor indeed lead to reaction.
all of these factors, and is essentially the probability that a collision with sucient energy for reaction will
frequency factor.
(16.20)
2ICl
H2
[ICl] [H2 ].
However,
Rate Laws for Various Reactions) that the rate law for this
(16.21)
(16.22)
It would seem reasonable to assume that this reaction occurs as a single collision in which an oxygen atom is exchanged between the two molecules. However, the experimentally observed rate law for this reaction is
Rate = k[N O2 ]
In this case, the is squared.
(16.23)
[CO] concentration does not aect the rate of the reaction at all, and the [N O2 ] concentration
These examples demonstrate that the rate law for a reaction cannot be predicted from the
stoichiometric coecients and therefore that the collision model does not account for the rate of the reaction. There must be something seriously incomplete with the collision model. The key assumption of the collision model is that the reaction occurs by a single collision. Since this assumption leads to incorrect predictions of rate laws in some cases, the assumption must be invalid in at least those cases. It may well be that reactions require more than a single collision to occur, even in Moreover, if more than two molecules are reactions involving just two types of molecules as in (16.22).
involved as in (16.20), the chance of a single collision involving all of the reactive molecules becomes very small. We conclude that many reactions, including those in (16.20) and (16.22), must occur as a result of several collisions occurring in sequence, rather than a single collision. The rate of the chemical reaction must be determined by the rates of the individual steps in the reaction. Each step in a complex reaction is a single collision, often referred to as an
elementary process.
In
single collision process step, our collision model should correctly predict the rate of that step. The sequence of such elementary processes leading to the overall reaction is referred to as the
reaction mechanism.
Determining the mechanism for a reaction can require gaining substantially more information than simply the rate data we have considered here. However, we can gain some progress just from the rate law.
182
involved
[N O2 ]
, one step in the reaction mechanism must involve the collision of two
N O2
molecules.
Furthermore, this step must determine the rate of the overall reaction. Why would that be? In any multistep process, if one step is considerably slower than all of the other steps, the rate of the multi-step process is determined entirely by that slowest step, because the overall process cannot go any faster than the slowest step. It does not matter how rapidly the rapid steps occur. process is thus called the Therefore, the slowest step in a multi-step
This argument suggests that the reaction in (16.22) proceeds via a slow step in which two
N O2
molecules
collide, followed by at least one other rapid step leading to the products. A possible mechanism is therefore
Step 1
N O2 + N O2 N O3 + N O
(16.24)
Step 2
N O3 + CO N O2 + CO2
(16.25)
If Step 1 (16.24: Step 1) is much slower than Step 2 (16.25: Step 2), the rate of the reaction is entirely determined by the rate of Step 1 (16.24: Step 1). From our collision model, the rate law for Step 1 (16.24: Step 1) must be
Rate = k[N O2 ]
, which is consistent with the experimentally observed rate law for the
overall reaction. This suggests that the mechanism in (16.24) (Step 1) and (16.25) (Step 2) is the correct description of the reaction process for (16.22), with the rst step as the rate determining step. There are a few important notes about the mechanism. First, one product of the reaction is produced in the rst step, and the other is produced in the second step. Therefore, the mechanism does lead to the overall reaction, consuming the correct amount of reactant and producing the correct amount of reactant. Second, the rst reaction produces a new molecule, second step then consumes that molecule, and As such,
N O3 ,
N O3
is called a
reaction intermediate.
N O3
therefore does not appear in the overall reaction, (16.22). Intermediates play important roles in the rates of many
reactions. If the rst step in a mechanism is rate determining as in this case, it is easy to nd the rate law for the overall expression from the mechanism. If the second step or later steps are rate determining, determining the rate law is slightly more involved. The process for nding the rate law in such a case is illustrated in Exercise 16.11.
183
C60 O3
O2
is released leaving
C60 O3
in solution.
16.9.1
Based on the data in Figure 16.2 (Oxidized Buckminsterfullerene Absorbance) and Figure 16.3 (Rate of Decomposition), plot the concentration of
C60 O
as a function of time.
16.9.2
How would you dene the rate of the reaction in terms of the slope of the graph from above (Section 16.9.1)? How is the rate of appearance of
C60 O3 ?
The reaction 2N2 O5 (g) 4N O2 (g) + O2 (g) Rate = k [N2 O5 ] with k = 0.070s1 .
Exercise 16.2
16.9.1
How is the rate of appearance of larger?
N O2
N2 O5 ?
Which rate is
16.9.2
Based on the rate law and rate constant, sketch a plot of on the same graph.
[N2 O5 ], [N O2 ],
and
[O2 ]
For which of the reactions listed in Table 16.4: Rate Laws for Various Reactions can you be certain that the reaction does not occur as a single step collision? Explain your reasoning.
Consider two decomposition reactions for two hypothetical materials, A and B. The decomposition of A is found to be rst order, and the decomposition of B is found to be second order.
16.9.1
Assuming that the two reactions have the same rate constant at the same temperature, sketch and
[B]
versus time on the same graph for the same initial conditions,
[A]
16.9.2
Compare the half-lives of the two reactions. Under what conditions will the half-life of B be less than the half-life of A? Under what conditions will the half-life of B be greater than the half-life of A?
Exercise 16.5
1 T is linear but can have either a negative slope or a positive slope, depending on the reaction, as was observed here 1 (Chapter 14). However, the graph of the logarithm of the rate constant for a reaction versus T has a negative slope for essentially every reaction. Using equilibrium arguments, explain why the
graph for the rate constant must have a negative slope.
184
Exercise 16.6
Using (16.18) and the data in Table 16.5: Rate Constant for Hydrogen Gas and Iodine Gas, determine the activation energy for the reaction
Exercise 16.7
[H2 ]0 = [I2 ]0
We found that the rate law for the reaction fore, the reaction is will a graph of
second order
overall but
and we measure
Exercise 16.8
H2 (g) + I2 (g) 2HI (g) is Rate = k [H2 ] [I2 ]. Thererst order in H2 . Imagine that we start with time. Will a graph of ln ([H2 ]) versus time be linear or
As a rough estimate, chemists often assume a double when the temperature is increased by
10 C .
16.9.1
What does this suggest about the activation energies of reactions?
16.9.2
Using (16.18), calculate the activation energy of a reaction whose rate doubles when the temperature is raised from
25 C
to
35 C .
16.9.3
Does this rule of thumb estimate depend on the temperature range? To nd out, calculate the
factor by which the rate constant increases when the temperature is raised from assuming the same activation energy you found above (Section 16.9.2). this case?
100 C
to
110 C ,
Exercise 16.9
Consider a very simple hypothetical reaction
A + B 2C
16.9.1
At equilibrium, what must be the relationship between the rate of the forward reaction, and the reverse reaction
A+B 2C
2C A + B ?
16.9.2
Assume that both the forward and reverse reactions are elementary processes occurring by a single collision. reaction? What is the rate law for the forward reaction? What is the rate law for the reverse
16.9.3
Using the previous results from here (Section 16.9.1) and here (Section 16.9.2), show that the
kf kr , where kf is the rate constant for the forward reaction and kr is the rate constant for the reverse reaction.
equilibrium constant for this reaction can be calculated from
Kc =
Exercise 16.10
Ea,f ,
A + B C + D.
Energy), provide and explain the relationship between the activation energy in the forward direction,
Ea,r
185
endothermic (Figure 16.8(a) (Endothermic Reaction)) or exothermic (Figure 16.8(b) (Exothermic Reaction))? Explain.
Exercise 16.11
For the reaction
H2 (g)+I2 (g) 2HI (g), the rate law is Rate = k [H2 ] [I2 ].
that the reaction is a one-step elementary process, there is evidence that the reaction occurs in two steps, and the second step is the rate determining step:
Step 1
I2 2I
(16.26)
Step 2
H2 + 2I 2HI
(16.27)
Where Step 1 (16.26: Step 1) is fast and Step2 (16.27: Step 2) is slow.
16.9.1
If the both the forward and reverse reactions in Step 1 (16.26: Step 1) are much faster than Step2 (16.27: Step 2), explain why Step 1 (16.26: Step 1) can be considered to be at equilibrium.
16.9.2
What is the rate law for the rate determining step?
16.9.3
Since the rate law above (Section 16.9.2) depends on the concentration of an intermediate need to nd that intermediate. (16.26: Step 1) is at equilibrium. Calculate
I,
we
[I]
16.9.4
Substitute
[I] from above (Section 16.9.3) into the rate law found previously (Section 16.9.2) to nd
the overall rate law for the reaction. Is this result consistent with the experimental observation?
186
Chapter 17
Equilibrium and the Second Law of Thermodynamics
1
17.1 Foundation
We have observed and dened phase transitions and phase equilibrium. We have also observed equilibrium in a variety of reaction systems. We will assume an understanding of the postulates of the
Kinetic Molecular
17.2 Goals
We have developed an understanding of the concept of equilibrium, both for phase equilibrium and reaction equilibrium. As an illustration, at normal atmospheric pressure, we expect to nd
H2 O
0 C, in liquid form below 100 C, and in gaseous form above 100 C. What changes as we move from low temperature to high temperature cause these transitions in which phase is observed? Viewed dierently, if a sample of gaseous water at 120 C is cooled to below 100 C, virtually all of the water vapor spontaneously condenses to form the liquid:
H2 O (g) H2 O (l)
H2 O (l) H2 O (g)
What factors determine what phase is "stable"?
We can thus rephrase our question as, what determines which processes are spontaneous and which are not? As we know, at certain temperatures and pressures, more than one phase can be stable. For example, at 1 atm pressure and 0 C,
at 0 C
Small variations in the amount of heat applied or extracted to the liquid-solid equilibrium cause shifts towards liquid or solid without changing the temperature of the two phases at equilibrium. Therefore, when the two phases are at equilibrium, neither direction of the phase transition is spontaneous at 0 C. We therefore need to understand what factors determine when two or more phases can co-exist at equilibrium. This analysis leaves unanswered a series of questions regarding the dierences between liquids and gases. The concept of a gas phase or a liquid phase is not a characteristic of an individual molecule. In fact, it does
1 This
188
not make any sense to refer to the "phase" of an individual molecule. The phase is a collective property of large numbers of molecules. Although we can discuss the importance of molecular properties regarding liquid and gas phases, we have not discussed the factors which determine whether the gas phase or the liquid phase is most stable at a given temperature and pressure. These same questions can be applied to reaction equilibrium. When a mixture of reactants and products is not at equilibrium, the reaction will occur spontaneously in one direction or the other until the reaction achieves equilibrium. What determines the direction of spontaneity? equilibrium? How does the system What is the driving force towards Our goal will be to understand
the driving forces behind spontaneous processes and the determination of the equilibrium point, both for phase equilibrium and reaction equilibrium.
189
(a)
(b)
(c)
(d)
Figure 17.1:
(a) An unmixed state. (b) Another unmixed state. (c) A mixed state. (d) Another
mixed state.
By contrast, there are many more ways to arrange the dye molecules so that they do not form a drop,
i.e.,
so that the three molecules are not together. Two possibilities are shown in Figure 17.1(c) and Figure 17.1(d). The total number of such possibilities is 112. (The total number of all possible arrangements can be calculated as follows: there are 10 possible locations for the rst blue marble, 9 for the second, and 8 for the third. This gives 720 possible arrangements, but many of these are identical, since the marbles are indistinguishable. The number of duplicates for each arrangement is 6, calculated from three choices for the rst marble, two for the second, and one for the third. The total number of non-identical arrangements of the molecules is
720 6 = 120.) We conclude that, if we randomly place the 3 marbles in the tray of 10 boxes, the chances are only 8 out of 120 (or 1 out of 15) of observing a drop of ink.
Now, in a real experiment, there are many, many times more ink molecules and many, many times more possible positions for each molecule. To see how this comes into play, consider a row of 500 boxes and 5 blue marbles. (The
The total number of distinct congurations of the blue The number of these congurations which have all ve
ink marbles together in a drop is 496. If the arrangements are sampled randomly, the chances of observing a drop of ink with all ve molecules together are thus about one in 500 million. The possibilities are remote even for observing a partial "droplet" consisting of fewer than all ve dye molecules. The chance for four of the molecules to be found together is about one in 800,000. Even if we dene a droplet to be only three molecules together, the chances of observing one are less than one in 1600. We could, with some diculty, calculate the probability for observing a drop of ink when there are
1023
molecules. However, it is reasonably deduced from our small calculations that the probability is essentially zero for the ink molecules, randomly distributed into the water molecules, to be found together. We conclude
190
from this that the reason why we observe ink to disperse in water is that the probability is innitesimally small for randomly distributed dye molecules to be congregated in a drop. Interestingly, however, when we set up the real ink and water experiment, we did not randomly distribute the ink molecules. Rather, we began initially with a drop of ink in which the dye molecules were already congregated. We know that, according to our kinetic theory, the molecules are in constant random motion. Therefore, they must be constantly rearranging themselves. Since these random motions do not energetically favor any one arrangement over any other one arrangement, we can assume that all possible arrangements are equally probable. Since most of the arrangements do not correspond to a drop of ink, then
most of the
In the case above with ve blue marbles in 500 boxes, we expect to see a
drop only once in every 500 million times we look at the "glass". In a real glass of water with a real drop of ink, the chances are very much smaller than this. We draw two very important conclusions from our model. First, the random motions of molecules make every possible arrangement of these molecules equally probable. Second, mixing occurs spontaneously simply because there are vastly many more arrangements which are mixed than which are not. The rst conclusion tells us "how" mixing occurs, and the second tells us "why." On the basis of these observations, we deduce the following preliminary generalization: a spontaneous process occurs because it produces the most probable nal state.
1 120 . This is also the probability for each of the other possible arrangements, according to our model. However, if we now 112 ask instead for the probability of observing a "mixed" state (with no drop), the answer is 120 , whereas the 8 . Clearly, the probabilities are not the probability of observing an "unmixed" state (with a drop) is only 120
this. If we ask for the probability of the arrangement in Figure 17.1(a), the answer is thus same when considering the less specic characteristics "mixed" and "unmixed". In chemistry we are virtually never concerned with
microscopic details, such as the locations of specic macroscopic. As microstate, and each general state (mixed or
e.g.,
a mixed
individual molecules. Rather, we are interested in more general characteristics, such as whether a system is mixed or not, or what the temperature or pressure is. These properties of interest to us are such, we refer to a specic arrangement of the molecules as a unmixed, for example) as a
macrostate.
to our model. As such, the macrostates have widely diering probabilities. state) is proportional to the number of microstates with that macroscopic property. "mixed" macroscopic property.
Figure 17.1 (Arrangement of Three Ink Molecules), there are 112 arrangements (microstates) with the
112 120 , which is obviously proportional to 112. Thus, one way to measure the relative probability of a particular
As we have discussed, the probability of observing a mixed state is macrostate is by the number of microstates
i.e.,
there are 112 "ways" to get a mixed state in Figure 17.1 (Arrangement of Three Ink Molecules). Now we recall our conclusion that a spontaneous process always produces the outcome with greatest probability. Since using
measures this probability for any substance or system of interest, we could predict,
W,
whether the process leading from a given initial state to a given nal state was spontaneous by
simply comparing probabilities for the initial and nal states. For reasons described below, we instead dene
191
a function of
W, S (W ) = kln (W )
(17.1) (The
called the
is a proportion-
appropriate units for our calculations.) Notice that the more microstates there
are, the greater the entropy is. Therefore, a macrostate with a high probability (
e.g.
large entropy. We now modify our previous deduction to say that a spontaneous process produces the nal state of greatest entropy. (Following modications added below, this statement forms the
Thermodynamics.)
Second Law of
S
for our calculations and that the denition of the new function
is
We consider two identical glasses of water at the same temperature. We expect that the value of any physical property for the water in two glasses is twice the value of that property for a single glass. For example, if the enthalpy of the water in each glass is glasses together is
H1 ,
then it follows that the total enthalpy of the water in the two
Htotal = 2H1 . W
in the system: if we double the amount of water, we double the enthalpy. In direct contrast, we consider the calculation involving for these two glasses of water. The number of microstates of the macroscopic state of one glass of water is from the product
W1 ,
and likewise the number of microstates in the second glass of water is which does not equal
W1 .
However, if we combine the two glasses of water, the number of microstates of the total system is found
Wtotal = W1 W1 ,
2W1 .
In other words,
is not proportional to
the quantity of material in the system. This is inconvenient, since the value of
the two systems are combined or not. (If it is not clear that we should multiply the
simple example of rolling dice. The number of states for a single die is 6, but for two dice the number is
6 6 = 36, S1 + S1 .
not
6 + 6 = 12.) S (W ), so that, when we combine the two glasses of water, Stotal = Stotal = S (Wtotal ), S1 = S (W1 ), and Wtotal = W1 W1 , then our new function S must S (W1 W1 ) = S (W1 ) + S (W1 )
will satisfy this equation is the logarithm function, which has the property that We conclude that an appropriate state function which measures the number of
S = kln (W ).
determined experimentally, often referred to as "absolute" entropies, have been tabulated for many materials at many temperatures, and a few examples are given in Table 17.1: Absolute Entropies of Specic Substances. We treat these values as observations and attempt to understand these in the context of (17.1).
192
H2 O (g) H2 O (l) H2 O (l) H2 O (s) N H3 (g) HN3 (l) HN3 (g) O2 (g) O2 (g) O2 (g) CO (g) CO (g) CO2 (g) CO2 (g) Br2 (l) Br2 (g) I2 (s) I2 (g) CaF2 (s) CaCl2 (s) CaBr2 (s) C8 H18 (s)
25 25 0 0 25 25 25 25 50 100 25 50 24 50 25 25 25 25 25 25 25 25
Table 17.1
188.8 69.9 63.3 41.3 192.4 140.6 239.0 205.1 207.4 211.7 197.7 200.0 213.7 216.9 152.2 245.5 116.1 260.7 68.9 104.6 130 361.1
There are several interesting generalities observed in Table 17.1: Absolute Entropies of Specic Substances. First, in comparing the entropy of the gaseous form of a substance to either its liquid or solid form at the same temperature, we nd that the gas always has a substantially greater entropy. This is easy to understand from (17.1): the molecules in the gas phase occupy a very much larger volume. There are very many more possible locations for each gas molecule and thus very many more arrangements of the molecules in the gas. It is intuitively clear that
greater than that of the corresponding liquid or solid. Second, we observe that the entropy of a liquid is always greater than that of the corresponding solid. This is understandable from our kinetic molecular view of liquids and solids. Although the molecules in the liquid occupy a comparable volume to that of the molecules in the solid, each molecule in the liquid is free to move throughout this entire volume. The molecules in the solid are relatively xed in location. Therefore, the number of arrangements of molecules in the liquid is signicantly greater than that in the solid, so the liquid has greater entropy by (17.1). Third, the entropy of a substance increases with increasing temperature. The temperature is, of course, a measure of the average kinetic energy of the molecules. In a solid or liquid, then, increasing the temperature
193
increases the total kinetic energy available to the molecules. The greater the energy, the more ways there are to distribute this energy amongst the molecules. Although we have previously only referred to the range of positions for a molecule as aecting
W,
W.
Fourth, the entropy of a substance whose molecules contain many atoms is greater than that of a substance composed of smaller molecules. The more atoms there are in a molecule, the more ways there are to arrange those atoms. greater. Fifth, the entropy of a substance with a high molecular weight is greater than that of substance with a low molecular weight. This result is a harder to understand, as it arises from the distribution of the momenta of the molecules rather than the positions and energies of the molecules. It is intuitively clear that the number of arrangements of the molecules is With greater internal exibility,
temperature, the range of momenta available for a heavier molecule is greater than for a lighter one.
To p2 mv 2 = 2m . see why, recall that the momentum of a molecule is p = mv and the kinetic energy is KE = 2 2mKE. Since this Therefore, the maximum momentum available at a xed total kinetic energy KE is p = is larger for larger mass molecules, the range of momenta is greater for heavier particles, thus increasing and the entropy.
W.
below 0 C. This process clearly displays a decrease in entropy and therefore evidently a shift from a more probable state to a less probable state. This appears to contradict directly our conclusion. Similarly, we expect to nd condensation of water droplets from steam when steam is cooled. On days of high humidity, water spontaneously liquees from the air on cold surfaces such as the outside of a glass of ice water or the window of an air conditioned building. In these cases, the transition from gas to liquid is clearly from a higher entropy phase to a lower entropy phase, which does not seem to follow our reasoning thus far. Our previous conclusions concerning entropy and probability increases were compelling, however, and we should be reluctant to abandon them. What we have failed to take into consideration is that these phase transitions involve changes of energy and thus heat ow. Condensation of gas to liquid and freezing of liquid to solid both involve evolution of heat. This heat ow is of consequence because our observations also revealed that the entropy of a substance can be increased signicantly by heating. One way to preserve our conclusions about spontaneity and entropy is to place a condition on their validity: process produces the nal state of greatest probability and entropy a spontaneous
provided that
involve evolution of heat. This is an unsatisfying result, however, since most physical and chemical processes involve heat transfer. As an alternative, we can force the process not to evolve heat by absorbed if there is no source of heat. process
undergoing the process: no heat can be released if there is no sink to receive the heat, and no heat can be
in an isolated system produces the nal state of greatest probability and entropy. statement of the Second Law of Thermodynamics.
194
spontaneous, we must consider both the change in entropy of the system undergoing the process eect of the heat released or absorbed during the process on the entropy of the surroundings. we cannot prove it here, the entropy increase of a substance due to heat
and the
Although
q at temperature T is given by q . From another study (Chapter 10), we can calculate the heat transfer for a process occurring T under constant pressure from the enthalpy change, (H). By conservation of energy, the heat ow into (S) =
the surroundings must be transfer must be
(H). Therefore, the increase in the entropy of the surroundings due to heat (Ssurr ) = (H) . Notice that, if the reaction is exothermic, (H) < 0 so (Ssurr ) > 0. T
If we want to apply this statement to a non-
According to our statement of the Second Law, a spontaneous process in an isolated system is always accompanied by an increase in the entropy of the system. spontaneous process, isolated system, we must include the surroundings in our entropy calculation. We can say then that, for a
(Ssurr ) = (H) , T
(S)
(H) T
> 0.
the advantage that it takes into account the eects on both the system undergoing the process and the Recall that the condensation Condensation is an
of water vapor occurs spontaneously at temperature below 100 C but not above. Therefore therefore
exothermic process; to see this, consider that the reverse process, evaporation, obviously requires heat input.
condensation.
zero for condensation only if the temperature is not too high. which is positive, becomes larger than
(S),
(H),
so
Therefore, condensation only occurs at lower temperatures. Because of the considerable practical utility of (17.2) in predicting the spontaneity of physical and chemical processes, it is desirable to simplify the calculation of the quantity on the left side of the inequality. One way to do this is to dene a new quantity
G = H T S,
called the
free energy.
denition the change in the free energy which occurs during a process at constant temperature, we get
(G) < 0
Note that Since
(17.3)
for any spontaneous process. Thus, in any spontaneous process, the free energy of the system decreases.
H, T ,
and
S,
(G)
used to calculate
(H)
(G).
J J mole of liquid water is 69.9 , whereas the entropy of one mole of water vapor is 188.8 . Our rst thought, K K based on our understanding of spontaneous processes and entropy, might well be that a mole of liquid water at 25 C should spontaneously convert into a mole of water vapor, since this process would greatly increase
195
the entropy of the water. We know, however, that this does not happen. Liquid water will exist in a closed container at 25 C without spontaneously converting entirely to vapor. What have we left out? The answer, based on our discussion of free energy, is the energy associated with evaporation. conversion of one mole of liquid water into one mole of water vapor results in absorption of The
44.0kJ
of energy
from the surroundings. Recall that this loss of energy from the surroundings results in a signicant decrease in entropy of the surroundings. We can calculate the amount of entropy decrease in the surroundings from
(Ssurr ) = (H) . T
44.0kJ J 298.15K = 147.57 K for a single mole. This entropy J J J decrease is greater than the entropy increase of the water, 188.8 K 69.9 K = 118.9 K . Therefore, the entropy of the universe when one mole of liquid water converts to one mole of water vapor at 25 C.
At 25 C, this gives
(Ssurr ) =
decreases
(G) = 44000
(G) = 8.55
Since the free energy increases in the transformation of one mole of liquid water to one mole of water vapor, we predict that the transformation will not occur spontaneously. This is something of a relief, because we have correctly predicted that the mole of liquid water is stable at 25 C relative to the mole of water vapor. We are still faced with our perplexing question, however. Why does any water evaporate at 25 C? How can this be a spontaneous process? The answer is that we have to be careful about interpreting our prediction. The entropy of one mole of water vapor at 25 C
mole of liquid water will not spontaneously evaporate to form one mole of water vapor at 25 C and 1.00 atm pressure. This prediction is in agreement with our observation, because we have found that the water vapor formed spontaneously above liquid water at 25 C has pressure 23.8 torr, well below 1.00 atm. Assuming that our reasoning is correct, then the spontaneous evaporation of water at 25 C when water vapor is present initially must have
no
(G) < 0.
the water vapor increases, evaporation must continue as long as than zero, that is, evaporation stops when liquid and vapor.
(G) < 0.
in a closed system when we reach the vapor pressure, so we must reach a point where
(G)
is no longer less
(G) = 0.
Since (G) = (H) T (S), (H) = 44.0kJ for the evaporation of one mole of water. Therefore, the pressure of water vapor at which (G) = 0 at 25 C is the pressure at which (H) J (S) = T = 147.6 K for a single mole of water evaporating. This is larger than the value of (S) for J one mole and 1.00 atm pressure of water vapor, which as we calculated was 118.9 . Evidently, (S) for K We can actually determine the conditions under which this is true. then when
evaporation changes as the pressure of the water vapor changes. We therefore need to understand why the entropy of the water vapor depends on the pressure of the water vapor. Recall that 1 mole of water vapor occupies a much smaller volume at 1.00 atm of pressure than it does at the considerably lower vapor pressure of 23.8 torr. In the larger volume at lower pressure, the water molecules have a much larger space to move in, and therefore the number of microstates for the water molecules must be larger in a larger volume. Therefore, the entropy of one mole of water vapor is larger in a larger volume at lower pressure. The entropy change for evaporation of one mole of water is thus greater when the evaporation occurs to a lower pressure. With a greater entropy change to oset the entropy loss of the surroundings, it is possible for the evaporation to be spontaneous at lower pressure. And this is exactly what we observe. To nd out how much the entropy of a gas changes as we decrease the pressure, we assume that the number of microstates
V.
196
because the larger the volume, the more places there are for the molecules to be. Since the entropy is given by
S = kln (W ),
ln (V ).
S (V2 ) S (V1 )
= =
(17.4)
with pressure, and we remember from Boyle's law that, for a xed
S (P2 ) S (P1 )
= Rln
P1 P2 P2 P1 J 188.8 K
= Rln
For water vapor, we know that the entropy at 1.00 atm pressure is this equation gives that the
(17.5)
the equation above to determine the entropy at any other pressure. For a pressure of
23.8torr = 0.0313atm,
We can use this
S (23.8torr))
is
J 217.6 K
(S)
to calculate that for evaporation of one mole of water at 25 C and water vapor pressure of 23.8 torr is
We can conclude that the evaporation of water when no vapor is present initially is a spontaneous process with
(G) < 0,
and the evaporation continues until the water vapor has reached its the equilibrium vapor
(G) = 0.
at equilibrium. From these relations, we would predict that most (but not all) exothermic processes with
(H) < 0
are spontaneous, because all such processes increase the entropy of the surroundings when they
occur. Similarly, we would predict that most (but not all) processes with We try applying these conclusions to synthesis of ammonia
(S) > 0
are spontaneous.
(17.6)
J at 298K, for which we nd that S = 198 molK . Note that S < 0 because the reaction reduces the total number of gas molecules during ammonia synthesis, thus reducing W , the number of ways of
kJ = 92.2 mol .
Overall, we nd
S < 0 suggests that (17.6) should not occur at all. However, kJ that G = 33.0 mol at 298K, which according to (17.3) suggests
that (17.6) is spontaneous. Given this analysis, we are now pressed to ask, if (17.6) is predicted to be spontaneous, why does the reaction come to equilibrium without fully consuming all of the reactants? The answer lies in a more careful examination of the values given:
conditions,
, and
at standard
N H3 .
Note
which means that all of the gases in the reactants and products are taken to be at 1 atm
<0
for (17.6) at standard conditions means that, if all three gases are and
present at 1 atm pressure, the reaction will spontaneously produce an increase in the amount of that this will reduce the pressure of the value of pressures.
N2
H2
N H3 .
(S) and thus of (G), because as we already know the entropies of all three gases depend on their As the pressure of N H3 increases, its entropy decreases, and as the pressures of the reactants
Available for free at Connexions <http://cnx.org/content/col10264/1.5>
197
gases decrease, their entropies increase. The result is that creates more
N H3
(S)
From this analysis, we can say by looking at conditions. Moreover, the more negative
(S) becomes increasingly negative. The reaction (G) = (H) T (S) = 0. S , H , and G that, since G < 0
for (17.6), reaction equilibrium results in production of more product and less reactant than at standard
is, the more strongly favored are the products over the
reactants at equilibrium.
(G) = 0. As noted before, (G) depends on the pressures of the gases (S) depends on these pressures. Though we will not prove it here, it can (17.5) to a reaction that the relationship between (G) and the pressures of the
(G) = G
(Recall again that the superscript
+ RT ln (Q) G
the free energies of the products and reactants when all gases are at 1 atm pressure.) In this equation,
Q is a
quotient of partial pressures of the gases in the reaction mixture. In this quotient, each product gas appears in the numerator with an exponent equal to its stoichiometic coecient, and each reactant gas appears in the denominator also with its corresponding exponent. For example, for the reaction
(17.8)
PHI 2 PH 2 PI 2
(17.9)
Q need not be the equilibrium partial pressures. However, Q has the same value as Kp , the equilibrium pressures are at equilibrium, we know that (G) = 0. If we look
= (RT ln (Kp )) G
(17.10) To
This is an exceptionally important relationship, because it relates two very dierent observations. understand this signicance, consider rst the case where
< 0.
in this case, the reaction equilibrium will favor the products. From (17.10) we can note that, if it must be that contrast, if
< 0,
Kp > 1. Furthermore, if G is a large negative number, Kp is a very large number. By G is a large positive number, Kp will be a very small (though positive) number much less
than 1. In this case, the reactants will be strongly favored at equilibrium. Note that the thermodynamic description of equilibrium and the dynamic description of equilibrium are complementary. Both predict the same equilibrium. In general, the thermodynamic arguments give us an understanding of the conditions under which equilibrium occurs, and the dynamic arguments help us understand how the equilibrium conditions are achieved.
198
Assess the validity of the statement, "In all spontaneous processes, the system moves toward a state of lowest energy." Correct any errors you identify.
In each case, determine whether spontaneity is expected at low temperature, high temperature, any temperature, or no temperature:
17.11.1
> 0, S
>0
17.11.2
< 0, S
>0
17.11.3
> 0, S
<0
17.11.4
< 0, S
<0
Using thermodynamic equilibrium arguments, explain why a substance with weaker intermolecular forces has a greater vapor pressure than one with stronger intermolecular forces.
Why does the entropy of a gas increase as the volume of the gas increases? Why does the entropy decrease as the pressure increases?
G at T = reactants at T = 298K .
, and
Kp .
17.11.1
Exercise 17.7
199
Give an explanation, based on entropy and the Second Law, of why this reaction occurs spontaneously.
Exercise 17.8
For the reaction
H2 (g) 2H (g),
and
Should this
Exercise 17.9
For each of the reactions in Exercise 17.6, predict whether increases in temperature will shift the reaction equilibrium more towards products or more towards reactants.
Exercise 17.10
Kp ,
Using (17.7) and (17.9), show that for a given set of initial partial pressures where the reaction will spontaneously create more reactants. Also show that if
is smaller than
Q is larger than Kp ,
200
INDEX
Ex.
apples, 1
ED, 7(55) Electron Domain (ED) Theory, 59 electron domain model, 8(67), 67 Electron Domain Theory, 7(55) electron orbital, 5(27), 34 electronegativity, 8(67), 71 elementary process, 181 elements, 2(3), 3 empirical formula, 3(9), 13 endothermic, 10(93), 95 energy levels, 5(27), 31 enthalpy, 10(93), 96 entropy, 17(187), 191 equilibrium, 131, 15(153), 153 ether, 6(39) Ethers, 45 exothermic, 10(93), 95 expanded valence, 7(55), 61
rst order reaction, 172 formula, 2(3), 5 Foundation, 1 free energy, 17(187), 194 frequency factor, 181
C calorimetry, 10(93), 94
carboxylic acids, 15(153), 160 Charles' Law, 11(103), 110, 12(115), 116, 13(127), 128 Chemical Concepts, 1(1) Chemical Kinetics, 16(165) Chemical reaction half-life, 16(165) compounds, 2(3), 3 Concept Development Studies in Chemistry, 1 connement energy, 5(27), 35 covalent bond, 6(39), 40
INDEX
hydrolysis, 15(153), 160 particulate, 2(3), 6 phase diagram, 13(127), 134 phase equilibrium, 13(127), 131 phase transition, 13(127), 128 photoionization, 5(27), 32 photons, 5(27), 30 polarizability, 12(115), 124 polarizable, 12(115), 124 polyatomic, 7(55), 55 probability distribution, 5(27), 34
201
Idea Gas Law, 3(9) Ideal Gas Law, 13, 111, 12(115), 115, 115, 115, 116, 116, 116, 116, 117, 117, 117, 117, 118, 120, 120, 120, 121, 121, 121, 121, 121, 125, 14(139), 139 Introductory Chemistry, 1(1) ionization energy, 4(17), 21 irreversible, 17(187), 188 isomer, 6(39) isomers, 45
Law of Combining Volumes, 3(9), 10, 12(115), 116, 120 Law of Conservation of Mass, 2(3), 3, 3(9), 9 Law of Denite Proportions, 2(3), 4, 3(9), 9 Law of Mass Action, 14(139), 145 Law of Multiple Proportions, 2(3), 6, 3(9), 9 Le Chatelier's Principle, 14(139), 15(153) Le Chtelier's Principle, 14(139), 149, 15(153), 153 Lewis structure, 8(67), 67 Lewis structure model, 7(55), 55 Lewis structures, 6(39), 41 London forces, 12(115), 124 lone pairs, 7(55), 58
Second Law of Thermodynamics, 17(187), 191, 193 second order reaction, 172 specic heat, 10(93), 94 spectrum, 5(27), 28 standard enthalpy of formation, 10(93), 97 standard formation reaction, 10(93), 97 state, 96 state function, 10(93), 96 strong acids, 155 sublimation, 13(127), 134 subshells, 5(27), 33
third order reactions, 172 threshold frequency, 5(27), 29 trigonal bipyramid, 7(55), 61 trigonal planar, 7(55), 61 triple bond, 6(39), 43 triple point, 13(127), 135
202
INDEX
volatilities, 132 volatility, 13(127), 130 VSEPR, 7(55)
ATTRIBUTIONS
203
Attributions
Collection:
Edited by: John S. Hutchinson URL: http://cnx.org/content/col10264/1.5/ License: http://creativecommons.org/licenses/by/2.0/ Module: "Preface to Concept Development Studies in Chemistry" By: John S. Hutchinson URL: http://cnx.org/content/m12616/1.6/ Pages: 1-2 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/3.0/ Module: "The Atomic Molecular Theory" By: John S. Hutchinson URL: http://cnx.org/content/m12432/1.6/ Pages: 3-8 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0 Module: "Relative Atomic Masses and Empirical Formulae" By: John S. Hutchinson URL: http://cnx.org/content/m12431/1.7/ Pages: 9-15 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0 Module: "The Structure of an Atom" By: John S. Hutchinson URL: http://cnx.org/content/m12433/1.2/ Pages: 17-26 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0 Module: "Quantum Energy Levels In Atoms" By: John S. Hutchinson URL: http://cnx.org/content/m12451/1.2/ Pages: 27-37 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0 Module: "Covalent Bonding and Electron Pair Sharing" By: John S. Hutchinson URL: http://cnx.org/content/m12584/1.5/ Pages: 39-53 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0
204 Module: "Molecular Geometry and Electron Domain Theory" By: John S. Hutchinson URL: http://cnx.org/content/m12594/1.1/ Pages: 55-65 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Molecular Structure and Physical Properties" By: John S. Hutchinson URL: http://cnx.org/content/m12595/1.1/ Pages: 67-74 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Chemical Bonding and Molecular Energy Levels" By: John S. Hutchinson URL: http://cnx.org/content/m14777/1.3/ Pages: 75-92 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Energetics of Chemical Reactions" By: John S. Hutchinson URL: http://cnx.org/content/m12592/1.1/ Pages: 93-102 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "The Ideal Gas Law" By: John S. Hutchinson URL: http://cnx.org/content/m12598/1.2/ Pages: 103-114 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "The Kinetic Molecular Theory" By: John S. Hutchinson URL: http://cnx.org/content/m12450/1.2/ Pages: 115-125 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/1.0 Module: "Phase Equilibrium and Intermolecular Interactions" By: John S. Hutchinson URL: http://cnx.org/content/m12596/1.1/ Pages: 127-137 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Reaction Equilibrium in the Gas Phase" By: John S. Hutchinson URL: http://cnx.org/content/m12597/1.2/ Pages: 139-152 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/
ATTRIBUTIONS
ATTRIBUTIONS
Module: "Acid-Base Equilibrium" By: John S. Hutchinson URL: http://cnx.org/content/m12591/1.3/ Pages: 153-164 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Reaction Rates" By: John S. Hutchinson URL: http://cnx.org/content/m12728/1.2/ Pages: 165-185 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/ Module: "Equilibrium and the Second Law of Thermodynamics" By: John S. Hutchinson URL: http://cnx.org/content/m12593/1.4/ Pages: 187-199 Copyright: John S. Hutchinson License: http://creativecommons.org/licenses/by/2.0/
205
About Connexions
Since 1999, Connexions has been pioneering a global system where anyone can create course materials and make them fully accessible and easily reusable free of charge. We are a Web-based authoring, teaching and learning environment open to anyone interested in education, including students, teachers, professors and lifelong learners. We connect ideas and facilitate educational communities. Connexions's modular, interactive courses are in use worldwide by universities, community colleges, K-12 schools, distance learners, and lifelong learners. Connexions materials are in many languages, including English, Spanish, Chinese, Japanese, Italian, Vietnamese, French, Portuguese, and Thai. Connexions is part of an exciting new information distribution system that allows for
Connexions
has partnered with innovative on-demand publisher QOOP to accelerate the delivery of printed course materials and textbooks into classrooms worldwide at lower prices than traditional academic publishers.